Unexpected degradation and deiodination of diatrizoate by the Cu(II)/S(IV) system under anaerobic conditions

Mesoporous cobalt-manganese layered double hydroxides promote the activation of calcium sulfite for degradation and detoxification of metronidazole

Metronidazole (MNZ), a commonly used antibiotic, poses risks to water bodies and human health due to its potential carcinogenic, mutagenic, and genotoxic effects. In this study, mesoporous cobalt-manganese layered double hydroxides (CoxMny-LDH) with abundant oxygen vacancies (Ov) were successfully synthesized using the co-precipitation method and used to activate calcium sulfite (CaSO3) with slight soluble in water for MNZ degradation. The characterization results revealed that Co2Mn-LDH had higher specific areas and exhibited good crystallinity. Co2Mn-LDH/CaSO3 exhibited the best catalytic performance under optimal conditions, achieving a remarkable MNZ degradation efficiency of up to 98.1 % in only 8 min. Quenching experiments and electron paramagnetic resonance (EPR) tests showed that SO4•- and 1O2 played pivotal roles in the MNZ degradation process by activated CaSO3, while the redox cycles of Co2+/Co3+ and Mn3+/Mn4+ on the catalyst surface accelerated electron transfer, promoting radical generation. Three MNZ degradation routes were put forward based on the density functional theory (DFT) and liquid chromatography-mass spectrometer (LC-MS) analysis. Meanwhile, the toxicity analysis result demonstrated that the toxicity of intermediates post-catalytic reaction was decreased. Furthermore, the Co2Mn-LDH/CaSO3 system displayed excellent stability, reusability, and anti-interference capability, and achieved a comparably high removal efficiency across various organic pollutant water bodies. This study provides valuable insights into the development and optimization of effective heterogeneous catalysts for treating antibiotic-contaminated wastewater.

Occurrence of iodinated contrast media (ICM) in water environments and their control strategies with a particular focus on iodinated by-products formation: A comprehensive review

Iodinated contrast media (ICM), one of the pharmaceutical and personal care products (PPCPs), are frequently detected in various water bodies due to the strong biochemical stability and recalcitrance to conventional water treatment. Additionally, ICM pose a risk of forming iodinated by-products that can be detrimental to the aquatic ecosystem. Consequently, effectively removing ICM from aqueous environments is a significant concern for environmental researchers. This article provides a comprehensive review of the structural characteristics of ICM, their primary source (e.g., domestic and hospital wastewater), detected concentrations in water environments, and ecological health hazards associated with them. The current wastewater treatment technologies for ICM control are also reviewed in detail with the aim of providing a reference for future research. Prior researches have demonstrated that traditional treatment processes (such as physical adsorption, biochemical method and chemical oxidation method) have inadequate efficiencies in the removal of ICM. Currently, the application of advanced oxidation processes to remove ICM has become extensive, but there are some issues like poor deiodination efficiency and the risk of forming toxic intermediates or iodinated by-products. Conversely, reduction technologies have a high deiodination rate, enabling the targeted removal of ICM. But the subsequent treatment issues related to iodine (such as I- and OI-) are often underestimated, potentially generating iodinated by-products during the subsequent treatment processes. Hence, we proposed using combined reduction-oxidation technologies to remove ICM and achieved synchronous control of iodinated by-products. In the future, it is recommended to study the degradation efficiency of ICM and the control efficiency of iodinated by-products by combining different reduction and oxidation processes.

Promoted micropollutant degradation and structural evolution of natural organic matter by a novel S(IV)-based water treatment strategy

The ubiquity of various organic micropollutants in global water and wastewater has raised considerable concern about their cost-efficient elimination. This study reported that the novel UV365/FeTiOX/S(IV) system could accomplish superior abatement of different micropollutants (e.g., carbamazepine, CMZ) in 30-45 min with excellent reusability and stability of FeTiOX. In addition, this system functioned effectively to remove roxarsone and As(III)/As(V) by catalytic oxidation and adsorption, respectively. Mechanistic investigations suggested the dual roles of S(IV) in enhancing pollutant oxidation, i.e., promoted Fe(II)/Fe(III) cycle and photocatalysis. These processes facilitated the continuous generation of multiple oxidizing intermediates (e.g., hydroxyl radicals, sulfate radicals, and singlet oxygen), in which the last one was first proposed as the main contributor in iron-mediated S(IV)-based oxidation processes. Based on the product identification, the transformation pathways of four different micropollutants were tentatively unraveled. The in silico prediction suggested the lower environmental risks of the final reaction products than the precursors. Particularly, the structural alteration of humic acid was analyzed, indicating an increased O/C ratio after oxidative treatment. Overall, this study has implications for developing an efficient oxidation technique for removing multiple micropollutants in water and facilitating the mechanistic reactivity modulation of the S(IV)-based oxidation strategies in water treatment.

Rapid degradation and detoxification of metronidazole using calcium sulfite activated by CoCu two-dimensional layered bimetallic hydroxides: Performance, mechanism, and degradation pathway

In this study, cobalt copper-layered double hydroxides (CoCu-LDHs) were prepared by coprecipitation as catalysts to activate CaSO3 for metronidazole (MNZ) degradation. This is the first report on layered double hydroxides activating sulfite for the degradation of organic pollutants. Meanwhile, to address the issue of self-quenching reactions readily occurring in conventional sulfite advanced oxidation systems and resulting in low oxidant efficiency, CaSO3 with slightly soluble in water was used instead of commonly used Na2SO3, to improve the limitations of traditional systems. The results showed that in the CoCu-LDHs/CaSO3 system, the degradation rate of MNZ reached 98.7% within 5 min, representing a 23.0% increase compared to the CoCu-LDHs/Na2SO3 system. Owing to the excellent catalytic performance exhibited by CoCu-LDHs, characterizations including XRD, FTIR, SEM, TEM, BET and XPS were carried out to investigate this further. The results confirmed the successful synthesis of CoCu-LDH, and the activation mechanism study revealed that Co and Cu were considered to the main elements in activating CaSO3, demonstrating good synergistic effects. In addition, the oxygen vacancies on the catalyst surface also played a positive role in generating radicals and promoting electron transfer. Subsequently, the effects of Co/Cu ratio, catalyst dosage, oxidant concentration, pollutant concentration, pH and coexisting substances on MNZ degradation were investigated. Additionally, based on the LC-MS analysis of degradation products and toxicity tests, MNZ was transformed into different intermediates with low toxicity through four pathways, eventually mineralizing into inorganic small molecules. After six cycles, the MNZ degradation rate still reached 82.1%, exhibiting excellent stability and recyclability. In general, this study provides new ideas for activating sulfite, while providing theoretical support for subsequent research on sulfite advanced oxidation system.

Performance and degradation pathway of florfenicol antibiotic by nitrogen-doped biochar supported zero-valent iron and zero-valent copper: A combined experimental and DFT study

Fluorinated compounds are a class of organic substances resistant to degradation. Although zero-valent iron (Fe0) has a promising reducing capability, it still fails to degrade fluorine-containing antibiotics (i.e., florfenicol) efficiently. In this study, we applied a simple one-pot pyrolytic approach to synthesize nitrogen-doped biochar supported Fe0 and zero-valent copper (Cu0) composite (Fe/Cu@NBC) and investigated its performance on florfenicol removal. The results clearly showed that approximately 91.4% of florfenicol in the deionized water was removed by Fe/Cu@NBC within 8 h. As the reaction time was extended to 15 d, the total degradation rate of florfenicol reached 96.6%, in which the defluorination and dechlorination rates were 73.2% and 82.1%, respectively. Both experimental results and density functional theory calculation suggested that ∙OH and ·O2- triggered β-fluorine elimination, resulting in defluorination prior to dechlorination. This new finding was distinct from previous viewpoints that defluorination was more difficult to occur than dechlorination. Fe/Cu@NBC also had a favorable performance for removal of florfenicol in surface water. This study provides a new insight into the degradation mechanism and pathway of florfenicol removal in the Fe/Cu@NBC system, which can be a promising alternative for remediation of fluorinated organic compounds in the environment.

Removal of Iodine-Containing X-ray Contrast Media from Environment: The Challenge of a Total Mineralization

Iodinated X-ray contrast media (ICM) as emerging micropollutants have attracted considerable attention in recent years due to their high detected concentration in water systems. It results in environmental issues partly due to the formation of toxic by-products during the disinfection process in water treatment. Consequently, various approaches have been investigated by researchers in order to achieve ICM total mineralization. This review discusses the different methods that have been used to degrade them, with special attention to the mineralization yield and to the nature of formed by-products. The problem of pollution by ICM is discussed in the first part dedicated to the presence of ICM in the environment and its consequences. In the second part, the processes for ICM treatment including biological treatment, advanced oxidation/reductive processes, and coupled processes are reviewed in detail. The main results and mechanisms involved in each approach are described, and by-products identified during the different treatments are listed. Moreover, based on their efficiency and their cost-effectiveness, the prospects and process developments of ICM treatment are discussed.

Pharmaceuticals and personal care products in water streams: Occurrence, detection, and removal by electrochemical advanced oxidation processes

Pharmaceutical and personal care products (PPCPs) are part of the emerging contaminants (ECs) in the environment due to their known or suspected adverse effects in aquatic and terrestrial organisms, as well as in human health. Presence of PPCPs in aquatic and terrestrial ecosystems has been mainly attributed to the effluents of wastewater treatment plants (WWTPs). Although several PPCPs have been detected in wastewater, their removal from wastewater via biological processes is limited. Removal of PPCPs depends on their chemical structure, concentration, solubility, and technology used to treat the wastewater. Electrochemical Advanced Oxidation Processes (EAOPs) are some of the most sought-after methods for dealing with organic pollutants in water including PPCPs, due to generation of strong oxidants such as •OH, H₂O₂ and O₃^- by using directly or indirectly electrochemical technology. This review is focused on the removal of main PPCPs via EAOPs such as, anodic oxidation, electro-Fenton, photoelectron-Fenton, solar photoelectron-Fenton, photoelectrocatalysis and sonoelectrochemical processes. Although more than 40 PPCPs have been identified through different analytical approaches, antibiotics, anti-inflammatory and antifungal are the main categories of PPCPs detected in different water matrices. Application of EAOPs has been centered in the removal of antibiotics and analgesics of high consumption by using model media, e.g. Na₂SO_4. Photoelectrocatalysis and Electro-Fenton processes have been the most versatile EAOPs applied for PPCPs removal under a wide range of operating conditions and a variety of electrodes. Although EAOPs have gained significant scientific interest due to their effectiveness, low environmental impact, and simplicity, further research about the removal of PPCPs and their by-products under realistic concentrations and media is needed. Moreover, mid-, and long-term experiments that evaluate EAOPs performance will provide knowledge about key parameters that allow these technologies to be scaled and reduce the potential risk of PPCPs in aquatic and terrestrial ecosystem.

Application of a novel heterogeneous sulfite activation with copper(i) sulfide (Cu2S) for efficient iohexol abatement

Transition metal ion-activated sulfite autoxidation processes for the production of sulfate radicals (SO4˙-) have been widely investigated to achieve efficient abatement of recalcitrant organic pollutants. However, these homogeneous processes suffered from narrow effective pH range and metal release, thus restricting their practical application. In order to address this problem, we report a simple and efficient approach to iohexol abatement by a combined Cu2S and sulfite process (simplified as Cu2S/sulfite process) based on the superior activation performance of copper and the excellent electron donating capacity of the low-valent sulfur species. Compared with typical copper oxides, Cu2S can significantly accelerate the sulfite autoxidation to generate radicals, leading to 100% iohexol abatement in the Cu2S/sulfite process. The influence of solution pH and dissolved oxygen on iohexol abatement is also investigated. Qualitative and quantitative analysis of reactive radicals is performed by electron paramagnetic resonance (EPR) and radical quenching experiments. Generation of SO4˙- from sulfite activation with Cu2S mainly contributes to the iohexol abatement. X-ray photoelectron spectroscopy (XPS) suggests that copper is the main activation site and the reductive sulfur species can achieve the continuous regeneration of copper. Application potential of the Cu2S/sulfite process is also assessed. This study provides a new method for the treatment of water and wastewater containing organic micropollutants.

Enhanced degradation of tetracycline by Cu(II) complexation in the FeS/sulfite system

This study applied a mineral material of FeS to activate sulfite for efficient degradation of TTC in the presence of Cu(II) based on the identified complexation mechanism through UV-Vis spectra, FTIR spectroscopy and DFT calculation. pH plays an important role in TTC degradation and the initial pH of 6 and 7 were the divide in the contributions of FeS/sulfite oxidation and complex-precipitation. TTC-Cu(II) exhibits a superior promoting effect on the TTC degradation in FeS/sulfite system due to the improvement of TTC electron transfer reactivity and Fe(II) dissolution from FeS. Moreover, the formation of Cu(I) improved the recycling of Fe(II) from Fe(III). Dissolved oxygen-dependent free radicals' generation was confirmed, and TTC degradation was mainly attributed to SO₄^·- and ·OH. The characterization of FeS surface through XPS, XRD, SEM-EDS, Fe(II) deactivation tests, together with the comparison of pseudo-first-order rate constants for TTC degradation by FeS and ferrous ion supported the important role of surface and dissolved Fe(II) in sulfite activation. Furthermore, reasonable degradation pathways of TTC have been proposed according to the detected products by LC-MS. This work highlights the important role of pH, DO and Cu(II) complexation in sulfite activation and TTC degradation, furnishing theoretical support for further relevant studies.