Advances in micro interfacial phenomena of adsorptive micellar flocculation: Principles and application for water treatment

The construction of flocculation-to-extraction coupled system with a novel dual-functional polymer for dye wastewater treatment and reuse

The construction of novel materials with multiple functions for water treatment has received wide attention in the field of environmental science. Herein, a dual-functional polymer (DFP) was prepared through the etherification reaction of starch with isopropyl glycidyl ether and 2-chloro-4-dimethylamine-6-diethylamine-[1,3,5]-triazine. DFP exhibited controlled thermo-irreversible on/off properties, and the changes in water solubility could be observed in response to slight stimuli from the external environment. This made DFP a promising candidate for the treatment of dye wastewater through flocculation or extraction. The results showed that the maximum dye uptake capacity and the decoloration efficiency reached 976 mg/g and 97.2%, respectively, under the optimal flocculation conditions. Moreover, the extraction rate was 94.5% under the optimal extraction conditions. Excitingly, the heat-triggered flocculation-to-extraction behavior of DFP could be realized with a coupled system, which then minimized the drawbacks of a single unit. In this coupled system, the extraction mechanism changed from chemical extraction to physical extraction, which avoided unnecessary loss of decolorization rate. Furthermore, the recycling and reuse of waste resources could be achieved through stripping and the next round of direct dye baths. Therefore, this work provided a new methodology for the development of novel pollutant removal systems with dual-functional materials, achieving the reuse of waste resources and improving the quality of treated water.

Sustainable bioactive hydrogels for organic contaminant elimination in wastewater

Immobilized enzyme bioremediation is a promising technique for eliminating pollutants to alleviate water scarcity pressure but is severely hindered by poor enzymatic activity and stability. An effective charge-assisted H-bonding approach is developed to achieve high laccase loading and enzymatic activity on bio(cellulose)-based hydrogels. Notably, this strategy can be readily extended to lipase and catalase. The bio-based hydrogels are synthesized by grafting deoxyribonucleic acid onto the cellulose backbone through a one-step structural regulation, achieving high mechanical strength, enzyme loading and contaminant capture for degradation. The biocompatible laccase-immobilized hydrogels exhibit significant removal and degradation performance for diverse organic micropollutants, including parent and substituted polycyclic aromatic hydrocarbons, per- and polyfluoroalkyl substances, antibiotics and organic dyes. Further testing focused on parent and substituted polycyclic aromatic hydrocarbons shows minimal influence of various co-existing interfering substances on performance of the laccase-immobilized bioactive hydrogel, with its contaminant removal and degradation efficiency in authentic wastewater being 93.0- and 64.3-fold that of commercial free laccase, respectively. This work provides an effective strategy for sustainable bioremediation of wastewater and other pollutant streams, while simultaneously enabling the development of innovative enzyme catalysts.

Bioinspired stormwater control measure for the enhanced removal of truly dissolved polycyclic aromatic hydrocarbons and heavy metals from urban runoff

Stormwater harvesting (SWH) addresses the UN's Sustainable Development Goals (SDGs). Conventional stormwater control measures (SCMs) effectively remove particulate and colloidal contaminants from urban runoff; however, they fail to retain dissolved contaminants, particularly substances of concern like polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs), thereby hindering the SWH applicability. Here, inspired by protein folding in nature, we reported a novel biomimetic SCM for the efficient removal of dissolved PAHs and HMs from urban runoff. Lab-scale tests were conducted together with a more mechanistic investigation on how the contaminants were removed. By integrating hydrophobic organic chains with low-cost hydrophilic flocculant matrixes, our biomimetic flocculants achieved a 1.4-9.5 times removal of all detected dissolved PAHs and HMs, while enhancing the removal of a wide-spectrum of particulate and colloidal contaminants, compared to existing SCMs. Ecotoxicity, as indicated by newborn Daphnia magna as experimental organisms, was reduced from "acute toxicity" of the original runoff sample (toxic unit of ∼2.6) to "non-toxicity" (toxic unit < 0.4) of the treated water. The improved performance is attributed to the protein-folding-like features of the bioinspired flocculants providing: (i) stronger binding to PAHs (via hydrophobic association) and HMs (via coordination), and (ii) the ability of spontaneous aggregation. The bio-inspired approach in this work holds strong promise as an alternative or supplementary component in SCM systems, and is expected to contribute to sustainable water management practices in relation to SDGs.

Performance evaluation of Moringa oleifera seeds aqueous extract for removing Microcystis aeruginosa and microcystins from municipal treated-water

Introduction: Toxic microcystins (MCs) produced by cyanoprokaryotes -particularly by the cosmopolitan cyanobacterium Microcystis aeruginosa- pose adverse effects on aquatic organisms and their ecosystem and may also cause serious impacts on human health. These harmful monocyclic heptapeptides are the most prevalent cyanotoxins reported in freshwaters and must be eliminated for avoiding MCs release in receiving water bodies. Hence, this work aimed to test the efficacy of Moringa oleifera seeds water-based extract (MO) as a natural coagulant for removing cyanobacteria (especially M. aeruginosa), microalgae, and its associated MCs from pre-treated municipal wastewaters. Methodology: Four different MO coagulant doses (25, 50, 75 and 100 mg L-1) were investigated for cyanobacteria and microalgae removal by conventional coagulation assays and morphology-based taxonomy studies. Additionally, water turbidity and chlorophyll a (Chl a) content were also determined. Further, the presence and concentration of MCs soluble in water, remaining in the particulate fraction, and flocculated within the residual sludge were assessed using high-performance liquid chromatography coupled with diode array detection (HPLC-DAD). Results: The treatment with MO at 100 mg L-1 substantially reduced the number of cyanobacterial and microalgal species in the treated samples (average removal rate of 93.8% and 86.9%, respectively). These results agreed with a ∼44% concomitant reduction in Chl a and ∼97% reduction in water turbidity (a surrogate marker for suspended solids content). Notably, MCs concentrations in the treated water were significantly lowered to 0.6 ± 0.1 µg L-1 after addition of 100 mg L-1 MO. This value is below the WHO recommended limits for MCs presence in drinking water (<1.0 µg L-1). Discussion: The present study provides promising insights into the applicability of MO as a cost-effective, reliable, and sustainable natural coagulant, particularly for using in developing countries, to eliminate harmful cyanobacteria and cyanotoxins in municipal water treatment facilities.

Application of biochar in microbial fuel cells: Characteristic performances, electron-transfer mechanism, and environmental and economic assessments

Biochar is a by-product of thermochemical conversion of biomass or other carbonaceous materials. Recently, it has garnered extensive attention for its high application potential in microbial fuel cell (MFC) systems owing to its high conductivity and low cost. However, the effects of biochar on MFC system performance have not been comprehensively reviewed, thereby necessitating the evaluation of the efficacy of biochar application in MFCs. In this review, biochar characteristics were outlined based on recent publications. Subsequently, various applications of biochar in the MFC systems and their probable processes were summarized. Finally, proposals for future applications of biochar in MFCs were explored along with its perspectives and an environmental evaluation in the context of a circular economy. The purpose of this review is to gain comprehensive insights into the application of biochar in the MFC systems, offering important viewpoints on the effective and steady utilization of biochar in MFCs for practical application.

Protein-folding-inspired approach for UF fouling mitigation using elevated membrane cleaning temperature and residual hydrophobic-modified flocculant after flocculation-sedimentation pre-treatment

Hydrophobic-modified flocculants have demonstrated considerable promise in the removal of emerging contaminants by flocculation. However, there is a lack of information about the impacts of dosing such flocculants on the performance of subsequent treatment unit(s) in the overall water treatment process. In this work, inspired by the ubiquitous protein folding phenomenon, an innovative approach using an elevated membrane cleaning temperature as the means to induce residual hydrophobic-modified chitosan flocculant (TRC), after flocculation-sedimentation, to reduce membrane fouling in a subsequent ultrafiltration was proposed; this was evaluated in a continuous flocculation-sedimentation-ultrafiltration (FSUF) process treating samples of the Yangtze River. The hydrophobic chains of TRC had similar temperature-dependent hydrophobicity to those of natural proteins. In the 40-day operation of the FSUF system with combined dosing of alum and TRC, a moderately elevated cleaning water temperature (45 °C) of both backwash with air-bubbling and soaking with sponge-scrubbing cleaning, significantly reduced reversible and irreversible fouling resistance by 49.8%∼61.3% and 73.9%∼83.3%, respectively, compared to the system using cleaning water at 25 °C. Material flow analysis, statistical analysis, instrumental characterizations, and computational simulations, showed that the enhanced fouling mitigation originated from three factors: the reduced contaminant accumulation onto membranes, the strengthened membrane-surface-modification role of TRC, and the weakened structure of the fouling material containing TRC, at the elevated cleaning temperature. Other measures of the performance, these being water purification, membrane stability and economic aspects, also confirmed the potential and feasibility of the proposed approach. This work has provided new insights into the role of hydrophobic-modified flocculants in membrane fouling control, in addition to emerging contaminant removal, in a FSUF surface water treatment process.

Tailoring properties and performance of thin-film composite membranes by salt additives for water treatment: A critical review

During the fabrication of thin film composite (TFC) membranes by interfacial polymerization (IP), the utilization of salt additives is one of the effective methods to regulate membrane properties and performance. Despite gradually receiving widespread attention for membrane preparation, the strategies, effects and underlying mechanisms of using salt additives have not yet been systematically summarized. This review for the first time provides an overview of various salt additives used to tailor properties and performance of TFC membranes for water treatment. By classifying salt additives into organic and inorganic salts, the roles of added salt additives in the IP process and the induced changes in membrane structure and properties are discussed in detail, and the different mechanisms of salt additives affecting membrane formation are summarized. Based on these mechanisms, the salt-based regulation strategies have shown great potential for improving the performance and application competitiveness of TFC membranes, including overcoming the trade-off relationship between water permeability and salt selectivity, tailoring membrane pore size distribution for precise solute-solute separation, and enhancing membrane antifouling performance. Finally, future research directions are suggested to focus on the long-term stability assessment of salt-modified membranes, the combined use of different salt additives, and the integration of salt regulation with other membrane design or modification strategies.

Enhanced removal of trace pesticides and alleviation of membrane fouling using hydrophobic-modified inorganic-organic hybrid flocculants in the flocculation-sedimentation-ultrafiltration process for surface water treatment

Pesticide concentrations in surface water occasionally exceed regulated values due to seasonal events (rainy season in high intensity agricultural areas) or intermittent discharges (leakage, spillage, or other emergency events). The need to remove pesticide compounds in these situations poses a challenge for drinking water treatment plants (DWTPs). In this work, the performance of dosing hydrophobic-modified inorganic-organic hybrid flocculants (HOC-M; lower acute toxicity than corresponding metal salt coagulants; acceptable economic costs when M=Al or Fe; prepared in large-scale quantities), for the removal of four different pesticides (each initial concentration: 0.25 μg/L) from Yangtze River water, and in mitigating membrane fouling, by an integrated flocculation-sedimentation-ultrafiltration (FSUF) process, was evaluated over a period of 40 days; the FSUF is well-established in many DWTPs. The mechanisms underlying the treatment were unveiled by employing a combination of instrumental characterizations, chemical computations, material flow analyses, and statistical analyses. Efficient pesticide removal (80.3%∼94.3%) and membrane fouling reduction (26.6%∼37.3% and 28.3%∼57.6% for reversible and irreversible membrane resistance, respectively) in the FSUF process were achieved by dosing HOC-M, whereas conventional inorganic coagulants were substantially inferior for pesticide removal (< 50%) and displayed more severe fouling development. Hydrophobic association between the pesticides and the hydrophobic organic chain of HOC-M played a predominant role in the improvement in pesticide removal; coexisting particulate/colloid inorganic minerals and natural organic matter with HOC-M adsorbed on the surface, acting as floc building materials, provided sites for the indirect combination of pesticides into flocs. The observed fouling alleviation from dosing HOC-M was ascribed to both the pre-removal of fouling-causing materials in the flocculation-sedimentation prior to UF, and a stable hydrophilization modification effect of residual HOC-M in the UF unit. The latter effect resulted from a hydrophobic association between the PVDF substrate of the membranes and the hydrophobic organic chains of the HOC-M, causing the hydrophilic ends of the HOC-M to be exposed away from the membrane surface, thereby inhibiting foulant accumulation. This work has not only demonstrated the superior performance of dosing HOC-M in the FSUF process for trace pesticide removal in DWTPs, but also clarified the underlying mechanisms.

Degradation of organic pollutants from water by biochar-assisted advanced oxidation processes: Mechanisms and applications

Biochar has shown large potential in environmental remediation because of its low cost, large specific surface area, porosity, and high conductivity. Biochar-assisted advanced oxidation processes (BC-AOPs) have recently attracted increasing attention to the remediation of organic pollutants from water. However, the effects of biochar properties on catalytic performance need to be further explored. There are still controversial and knowledge gaps in the reaction mechanisms of BC-AOPs, and regeneration methods of biochar catalysts are lacking. Therefore, it is necessary to systematically review the latest research progress of BC-AOPs in the treatment of organic pollutants in water. In this review, first of all, the effects of biochar properties on catalytic activity are summarized. The biochar properties can be optimized by changing the feedstocks, preparation conditions, and modification methods. Secondly, the catalytic active sites and degradation mechanisms are explored in different BC-AOPs. Different influencing factors on the degradation process are analyzed. Then, the applications of BC-AOPs in environmental remediation and regeneration methods of different biochar catalysts are summarized. Finally, the development prospects and challenges of biochar catalysts in environmental remediation are put forward, and some suggestions for future development are proposed.

Smart IoT and Machine Learning-based Framework for Water Quality Assessment and Device Component Monitoring

Water is the most important natural element present on earth for humans, yet the availability of pure water is becoming scarce and decreasing. An increase in population and rise in temperatures are two major factors contributing to the water crisis worldwide. Desalinated, brackish water from the sea, lake, estuary, or underground aquifers is treated to maximize freshwater availability for human consumption. However, mismanagement of water storage, distribution, or quality leads to serious threats to human health and ecosystems. Sensors, embedded and smart devices in water plants require proactive monitoring for optimal performance. Traditional quality and device management require huge investments in time, manual efforts, labour, and resources. This research presents an IoT-based real-time framework to perform water quality management, monitor, and alert for taking actions based on contamination and toxic parameter levels, device and application performance as the first part of the proposed work. Machine learning models analyze water quality trends and device monitoring and management architecture. The results display that the proposed method manages water monitoring and accessing water parameters efficiently than other works.