Contraction transitions of F1-F0 ATPase during catalytic turnover

CBD resistant Salmonella strains are susceptible to epsilon 34 phage tailspike protein

The rise of antimicrobial resistance is a global public health crisis that threatens the effective control and prevention of infections. Due to the emergence of pandrug-resistant bacteria, most antibiotics have lost their efficacy. Bacteriophages or their components are known to target bacterial cell walls, cell membranes, and lipopolysaccharides (LPS) and hydrolyze them. Bacteriophages being the natural predators of pathogenic bacteria, are inevitably categorized as "human friends", thus fulfilling the adage that "the enemy of my enemy is my friend". Leveraging on their lethal capabilities against pathogenic bacteria, researchers are searching for more ways to overcome the current antibiotic resistance challenge. In this study, we expressed and purified epsilon 34 phage tailspike protein (E34 TSP) from the E34 TSP gene, then assessed the ability of this bacteriophage protein in the killing of two CBD-resistant strains of Salmonella spp. We also assessed the ability of the tailspike protein to cause bacteria membrane disruption, and dehydrogenase depletion. We observed that the combined treatment of CBD-resistant strains of Salmonella with CBD and E34 TSP showed poor killing ability whereas the monotreatment with E34 TSP showed considerably higher killing efficiency. This study demonstrates that the inhibition of the bacteria by E34 TSP was due in part to membrane disruption, and dehydrogenase inactivation by the protein. The results of this work provides an interesting background to highlight the crucial role phage protein such as E34 TSP could play in pathogenic bacterial control.

Mechanical Transformation of Compounds Leading to Physical, Chemical, and Biological Changes in Pharmaceutical Substances

This study demonstrates the link between the modification of the solid-phase pharmaceutical substances mechanical structure and their activity in waters with different molar ratio «deuterium-protium». Mechanochemical transformation of the powders of lactose monohydrate and sodium chloride as models of nutrients and components of dosage forms was investigated by the complex of physicochemical and biological methods. The solubility and kinetic activity of substances dispersed in various ways showed a positive correlation with the solvent isotope profile. Substances dissolved in heavy water were more active than solutes in natural water. Differential IR spectroscopy confirmed the modification of substituents in the sample of lactose monohydrate, demonstrating physicochemical changes during mechanical intervention. The biological activity of the compounds was determined by the method of Spirotox. The activation energy was determined by Arrhenius. Compared with the native compound, dispersed lactose monohydrate showed lower activation energy and, therefore, greater efficiency. In conclusion, proposed data confirm the statement that mechanical changes in compounds can lead to physicochemical changes that affect chemical and biological profiles.

A mechano-chemiosmotic model for the coupling of electron and proton transfer to ATP synthesis in energy-transforming membranes: a personal perspective

ATP is synthesized using ATP synthase by utilizing energy either from the oxidation of organic compounds, or from light, via redox reactions (oxidative- or photo phosphorylation), in energy-transforming membranes of mitochondria, chloroplasts, and bacteria. ATP synthase undergoes several changes during its functioning. The generally accepted model for ATP synthesis is the well-known rotatory model (see e.g., Junge et al., Nature 459:364-370, 2009; Junge and Müller, Science 333:704-705, 2011). Here, we present an alternative modified model for the coupling of electron and proton transfer to ATP synthesis, which was initially developed by Albert Lester Lehninger (1917-1986). Details of the molecular mechanism of ATP synthesis are described here that involves cyclic low-amplitude shrinkage and swelling of mitochondria. A comparison of the well-known current model and the mechano-chemiosmotic model is also presented. Based on structural, and other data, we suggest that ATP synthase is a Ca(2+)/H(+)-K(+) Cl(-)-pump-pore-enzyme complex, in which γ-subunit rotates 360° in steps of 30°, and 90° due to the binding of phosphate ions to positively charged amino acid residues in the N-terminal γ-subunit, while in the electric field. The coiled coil b 2-subunits are suggested to act as ropes that are shortened by binding of phosphate ions to positively charged lysines or arginines; this process is suggested to pull the α 3 β 3-hexamer to the membrane during the energization process. ATP is then synthesized during the reverse rotation of the γ-subunit by destabilizing the phosphated N-terminal γ-subunit and b 2-subunits under the influence of Ca(2+) ions, which are pumped over from storage-intermembrane space into the matrix, during swelling of intermembrane space. In the process of ATP synthesis, energy is first, predominantly, used in the delivery of phosphate ions and protons to the α 3 β 3-hexamer against the energy barrier with the help of C-terminal alpha-helix of γ-subunit that acts as a lift; then, in the formation of phosphoryl group; and lastly, in the release of ATP molecules from the active center of the enzyme and the loading of ADP. We are aware that our model is not an accepted model for ATP synthesis, but it is presented here for further examination and test.

Analysis of mitochondrial 3D-deformation in cardiomyocytes during active contraction reveals passive structural anisotropy of orthogonal short axes

The cardiomyocyte cytoskeleton, composed of rigid and elastic elements, maintains the isolated cell in an elongated cylindrical shape with an elliptical cross-section, even during contraction-relaxation cycles. Cardiomyocyte mitochondria are micron-sized, fluid-filled passive spheres distributed throughout the cell in a crystal-like lattice, arranged in pairs sandwiched between the sarcomere contractile machinery, both longitudinally and radially. Their shape represents the extant 3-dimensional (3D) force-balance. We developed a novel method to examine mitochondrial 3D-deformation in response to contraction and relaxation to understand how dynamic forces are balanced inside cardiomyocytes. The variation in transmitted light intensity induced by the periodic lattice of myofilaments alternating with mitochondrial rows can be analyzed by Fourier transformation along a given cardiomyocyte axis to measure mitochondrial deformation along that axis. This technique enables precise detection of changes in dimension of ∼1% in ∼1 µm (long-axis) structures with 8 ms time-resolution. During active contraction (1 Hz stimulation), mitochondria deform along the length- and width-axes of the cell with similar deformation kinetics in both sarcomere and mitochondrial structures. However, significant deformation anisotropy (without hysteresis) was observed between the orthogonal short-axes (i.e., width and depth) of mitochondria during electrical stimulation. The same degree of deformation anisotropy was also found between the myocyte orthogonal short-axes during electrical stimulation. Therefore, the deformation of the mitochondria reflects the overall deformation of the cell, and the apparent stiffness and stress/strain characteristics of the cytoskeleton differ appreciably between the two cardiomyocyte orthogonal short-axes. This method may be applied to obtaining a better understanding of the dynamic force-balance inside cardiomyocytes and of changes in the spatial stiffness characteristics of the cytoskeleton that may accompany aging or pathological conditions.

The role of subunit epsilon in the catalysis and regulation of FOF1-ATP synthase

The regulation of ATP synthase activity is complex and involves several distinct mechanisms. In bacteria and chloroplasts, subunit epsilon plays an important role in this regulation, (i) affecting the efficiency of coupling, (ii) influencing the catalytic pathway, and (iii) selectively inhibiting ATP hydrolysis activity. Several experimental studies indicate that the regulation is achieved through large conformational transitions of the alpha-helical C-terminal domain of subunit epsilon that occur in response to membrane energization, change in ATP/ADP ratio or addition of inhibitors. This review summarizes the experimental data obtained on different organisms that clarify some basic features as well as some molecular details of this regulatory mechanism. Multiple functions of subunit epsilon, its role in the difference between the catalytic pathways of ATP synthesis and hydrolysis and its influence on the inhibition of ATP hydrolysis by ADP are also discussed.

Making ATP

We present a mesoscopic model for ATP synthesis by F(1)F(o) ATPase. The model combines the existing experimental knowledge of the F(1) enzyme into a consistent mathematical model that illuminates how the stages in synthesis are related to the protein structure. For example, the model illuminates how specific interactions between the gamma, epsilon, and alpha(3)beta(3) subunits couple the F(o) motor to events at the catalytic sites. The model also elucidates the origin of ADP inhibition of F(1) in its hydrolysis mode. The methodology we develop for constructing the structure-based model should prove useful in modeling other protein motors.

High hydrostatic pressure perturbs the interactions between CF(0)F(1) subunits and induces a dual effect on activity

Chloroplast ATP-synthase is an H(+)/ATP-driven rotary motor in which a hydrophobic multi-subunit assemblage rotates within a hydrophilic stator, and subunit interactions dictate alternate-site catalysis. To explore the relevance of these interactions for catalysis we use hydrostatic pressure to induce conformational changes and/or subunit dissociation, and the resulting changes in the ATPase activity and oligomer structure are evaluated. Under moderate hydrostatic pressure (up to 60-80 MPa), ATPase activity is increased by 1.5-fold. This is not related to an increase in the affinity for ATP, but seems to correlate with an enhanced turnover induced by pressure, and an activation volume for the ATPase reaction of -23.7 ml/mol. Higher pressure (up to 200 MPa) leads to dissociation of the enzyme, as shown by enzyme inactivation, increased binding of 8-anilinonaphthalene-1-sulfonate (ANS) to hydrophobic regions, and labeling of specific Cys residues on the beta and alpha subunits by N-iodoacetyl-N'-(5-sulfo-1-naphthyl)ethylene-4-diamine (IAEDANS). Compression-decompression cycles (between 0.1 and 200 MPa) inactivate CF(0)F(1) in a concentration-dependent manner, although after decompression no enzyme subunit is retained on a Sephadex-G-50 centrifuge column or is further labeled by IAEDANS. It is proposed that moderate hydrostatic pressures induce elastic compression of CF(0)F(1), leading to enhanced turnover. High pressure dissociation impairs the contacts needed for rotational catalysis.

ADP- and oligomycin-sensitive redox behavior of F0 b thiol in ATPsynthase depends on neighbored primary structure: investigations using 14-C-labeled alpha lipoic acid

Purified ATPsynthase of bovine heart mitochondria has been analyzed for its mobility and reactivity of oligomycin-sensitive sulfhydryl regions in presence of the substrate ADP and oligomycin. Labeling of thiol groups at the hydrophobic F_0 region of the ATPsynthase was increased in the enzyme initially treated with SDS, N-ethylmaleimide and dithiothreitol (modified enzyme). After dialysis or gel permeation the ATPsynthase was treated with [14C] alpha lipoic acid at a molar ratio of 35-85/1 (lipoic acid/ATPsynthase) corresponding to 4-8.6 nmol/mg protein. Under these conditions, ATPase activity of the native enzyme was significantly decreased. After preincubation with ADP, PAGE of the native, [14C] labeled enzyme revealed an increase of radioactivity at a region of 25 kDa deduced to Cys 197 of subunit b. In the modified enzyme the increase in radioactivity was found at 10 kDa. In this context, the sequence Lys-Cys-Ile around Cys 197 of subunit b suggests excessive reactivity of this thiol, as well as ready reversibility by -SH-S-S- interchange. Therefore, previously observed reaction by thiol reagents and antioxidants from outside the mitochondrion can be interpreted with Cys 197 of F0 b. It accounts for sulfhydryl unmasked by binding of ADP at F1.

Viscoelastic dynamics of actin filaments coupled to rotary F-ATPase: angular torque profile of the enzyme

ATP synthase (F(O)F(1)) operates as two rotary motor/generators coupled by a common shaft. Both portions, F(1) and F(O), are rotary steppers. Their symmetries are mismatched (C(3) versus C(10-14)). We used the curvature of fluorescent actin filaments, attached to the rotating c-ring, as a spring balance (flexural rigidity of 8. 10(-26) Nm(2)) to gauge the angular profile of the output torque at F(O) during ATP hydrolysis by F(1) (see theoretical companion article (. Biophys. J. 81:1234-1244.)). The large average output torque (50 +/- 6 pN. nm) proved the absence of any slip. Variations of the torque were small, and the output free energy of the loaded enzyme decayed almost linearly over the angular reaction coordinate. Considering the threefold stepping and high activation barrier of the driving motor proper, the rather constant output torque implied a soft elastic power transmission between F(1) and F(O). It is considered as essential, not only for the robust operation of this ubiquitous enzyme under symmetry mismatch, but also for a high turnover rate of the two counteracting and stepping motor/generators.

The epsilon subunit of bacterial and chloroplast F(1)F(0) ATPases. Structure, arrangement, and role of the epsilon subunit in energy coupling within the complex

Recent studies show that the epsilon subunit of bacterial and chloroplast F(1)F(0) ATPases is a component of the central stalk that links the F(1) and F(0) parts. This subunit interacts with alpha, beta and gamma subunits of F(1) and the c subunit ring of F(0). Along with the gamma subunit, epsilon is a part of the rotor that couples events at the three catalytic sites sequentially with proton translocation through the F(0) part. Structural data on the epsilon subunit when separated from the complex and in situ are reviewed, and the functioning of this polypeptide in coupling within the ATP synthase is considered.

Transient accumulation of elastic energy in proton translocating ATP synthase

ATP synthase is conceived as a rotatory engine with two reversible drives, the proton-transporting membrane portion, F0, and the catalytic peripheral portion, F1. They are mounted on a central shaft (subunit gamma) and held together by an eccentric bearing. It is established that the hydrolysis of three molecules of ATP in F1 drives the shaft over a full circle in three steps of 120 degrees each. Proton flow through F0 probably generates a 12-stepped rotation of the shaft so that four proton-translocating steps of 30 degrees each drive the synthesis of one molecule of ATP. We addressed the elasticity of the transmission between F0 and F1 in a model where the four smaller steps in F0 load a torsional spring which is only released under liberation of ATP from F1. The kinetic model of an elastic ATP synthase described a wealth of published data on the synthesis/hydrolysis of ATP by F0F1 and on proton conduction by F0 as function of the pH and the protonmotive force. The pK values of the proton-carrying group interacting with the acidic and basic sides of the membrane were estimated as 5.3-6.4 and 8.0-8.3, respectively.