Stabilizing effect of an S-layer on liposomes towards thermal or mechanical stress

Application of two glycosylated Lactobacillus surface layer proteins in coating cationic liposomes

The ability of isolated surface layer proteins (SLPs) to reassemble on suitable surfaces enables the application of SLPs in various fields of nanotechnology. In this work, SLPs from Lactobacillus buchneri BNCC 187,964 and L. kefir BNCC 190,565 were extracted and verified as glycosylated proteins. They were applied to coat on the surface of cationic liposomes. The absorption of the two SLPs on liposomes induced the zeta potential reduction and particle size increase. The two kinds of SLP-coated liposomes demonstrated better thermal, light and pH stability than the control liposomes. And the L. kefir SLP showed better protective effects than the L. buchneri SLP. Moreover, both of the SLPs could endow liposomes with the function of binding ferritin as observed by transmission electron microscope. Fourier transform infrared spectroscopy illustrated that the interaction between the two SLPs and liposomes was similar. The recrystallization of the two SLPs on the liposomes might drive the lipid into a higher order state and hydrogen bonds were formed between the two SLPs and the liposomes. All the findings demonstrated that L. kefir SLP and L. buchneri SLP had great potential to be explored as effective coating agents to improve the stability and function of cationic liposomes.Please check and confirm that the authors and their respective affiliations have been correctly identified and amend if necessary.Yes, all have been checked.

The Bacillus anthracis S-layer is an exoskeleton-like structure that imparts mechanical and osmotic stabilization to the cell wall

Surface layers (S-layers) are 2D paracrystalline protein monolayers covering the cell envelope of many prokaryotes and archaea. Proposed functions include a role in cell support, as scaffolding structure, as molecular sieve, or as virulence factor. Bacillus anthracis holds two S-layers, composed of Sap or EA1, which interchange in early and late exponential growth phase. We previously found that acute disruption of B. anthracis Sap S-layer integrity, by means of nanobodies, results in severe morphological cell surface defects and cell collapse. Remarkably, this loss of function is due to the destruction of the Sap lattice structure rather than detachment of monomers from the cell surface. Here, we combine force nanoscopy and light microscopy observations to probe the contribution of the S-layer to the mechanical, structural, and functional properties of the cell envelope, which have been so far elusive. Our experiments reveal that cells with a compromised S-layer lattice show a decreased compressive stiffness and elastic modulus. Furthermore, we find that S-layer integrity is required to resist cell turgor under hypotonic conditions. These results present compelling experimental evidence indicating that the S-layers can serve as prokaryotic exoskeletons that support the cell wall in conferring rigidity and mechanical stability to bacterial cells.

Translating a Thin-Film Rehydration Method to Microfluidics for the Preparation of a SARS-CoV-2 DNA Vaccine: When Manufacturing Method Matters

Previous investigations conducted on a liposomal formulation for a SARS-CoV-2 DNA vaccine manufactured using the thin-film layer rehydration method showed promising immunogenicity results in mice. The adaptation of the liposomal formulation to a scalable and reproducible method of manufacture is necessary to continue the investigation of this vaccine candidate. Microfluidics manufacture shows high potential in method translation. The physicochemical characterization of the blank liposomes produced by thin-film layer rehydration or microfluidics were shown to be comparable. However, a difference in lipid nanostructure in the bilayer resulted in a significant difference in the hydration of the thin-film liposomes, ultimately altering their complexation behavior. A study on the complexation of liposomes with the DNA vaccine at various N/P ratios showed different sizes and Zeta-potential values between the two formulations. This difference in the complexation behavior resulted in distinct immunogenicity profiles in mice. The thin-film layer rehydration-manufactured liposomes induced a significantly higher response compared to the microfluidics-manufactured samples. The nanostructural analysis of the two samples revealed the critical importance of understanding the differences between the two formulations that resulted in the different immunogenicity in mice.

The Polygonal Cell Shape and Surface Protein Layer of Anaerobic Methane-Oxidizing Methylomirabilis lanthanidiphila Bacteria

Methylomirabilis bacteria perform anaerobic methane oxidation coupled to nitrite reduction via an intra-aerobic pathway, producing carbon dioxide and dinitrogen gas. These diderm bacteria possess an unusual polygonal cell shape with sharp ridges that run along the cell body. Previously, a putative surface protein layer (S-layer) was observed as the outermost cell layer of these bacteria. We hypothesized that this S-layer is the determining factor for their polygonal cell shape. Therefore, we enriched the S-layer from M. lanthanidiphila cells and through LC-MS/MS identified a 31 kDa candidate S-layer protein, mela_00855, which had no homology to any other known protein. Antibodies were generated against a synthesized peptide derived from the mela_00855 protein sequence and used in immunogold localization to verify its identity and location. Both on thin sections of M. lanthanidiphila cells and in negative-stained enriched S-layer patches, the immunogold localization identified mela_00855 as the S-layer protein. Using electron cryo-tomography and sub-tomogram averaging of S-layer patches, we observed that the S-layer has a hexagonal symmetry. Cryo-tomography of whole cells showed that the S-layer and the outer membrane, but not the peptidoglycan layer and the cytoplasmic membrane, exhibited the polygonal shape. Moreover, the S-layer consisted of multiple rigid sheets that partially overlapped, most likely giving rise to the unique polygonal cell shape. These characteristics make the S-layer of M. lanthanidiphila a distinctive and intriguing case to study.

New Nanocarrier System for Liposomes Coated with Lactobacillus acidophilus S-Layer Protein to Improve Leu-Gln-Pro-Glu Absorption through the Intestinal Epithelium

The present study describes the development of a novel liposome nanocarrier system. The liposome was coated with Lactobacillus acidophilus CICC 6074 S-layer protein (SLP) to improve the intestinal absorption of the cholesterol-lowering peptide Leu-Gln-Pro-Glu (LQPE). The SLP-coated liposomes were prepared and characterized with morphology, particle size, zeta potential, membrane stability, Fourier transform infrared spectroscopy, and dual-channel surface plasma resonance. The results showed that SLP could successfully self-assemble on liposomes. Then, LQPE liposomes and SLP-coated LQPE liposomes (SLP-L-LQPE) were prepared. SLP-L-LQPE not only showed better sustained release properties and gastrointestinal tolerance in vitro but also increased the retention time in mice intestine. Transepithelial transport experiment indicates that the transshipment of LQPE increased significantly after being embedded by liposomes and coated with SLP. The research provides a theoretical basis for the study of SLP-coated liposomes and a potential drug delivery system for improving the intestinal absorption of peptides.

Optimization of Encapsulation Using Milk Polar Lipid Liposomes with S-Layer Protein and Transport Study of the ACE-Inhibitory Peptide RLSFNP

The purpose of this study is to develop a new type of nanodrug delivery material by modifying milk polar lipid (MPL) liposomes with the S-layer protein. LIP-RLSFNP (MPL liposomes encapsulating RLSFNP (Arg-Leu-Ser-Phe-Asn-Pro)) and SLP-LIP-RLSFNP (S-layer protein-modified LIP-RLSFNP) were prepared and characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, confocal laser scanning microscopy, surface plasmon resonance, and mastersizer dynamic light scattering measurements. The results showed that the S-layer protein could modify the surface of MPL liposomes, stabilize the shape of the vesicles, and improve the resistance to external interference. Furthermore, SLP-LIP-RLSFNP showed better performance in in vitro and in vivo experiments compared with LIP-RLSFNP in terms of promoting absorption and delayed release. The findings suggested that MPL liposomes modified with the S-layer protein have potential for use as an effective delivery system for therapeutic proteins and peptides.

Coating function and stabilizing effects of surface layer protein from Lactobacillus acidophilus ATCC 4356 on liposomes

Surface layer proteins (SLPs) are crystalline arrays in the outermost layer of cell envelope in many archaea and bacteria. SLPs subunits have the ability to reassemble on the surface of lipid layers. In this work, the SLP from Lactobacillus acidophilus ATCC 4356 was extracted and reassembled on the surface of positively charged liposomes composed of dipalmitoyl phosphatidylcholine, cholesterol and octadecylamine. Zeta potentials and particle size were determined to describe the adsorption process of SLP on liposomes. The liposomes completely coated with SLP were observed by transmission electron microscope. To investigate the stabilizing effects of SLP on liposomes, carboxyfluorescein (CF) was encapsulated and its leakage was determined as an evaluation index. The results showed that the L. acidophilus ATCC 4356 SLP significantly (P < 0.05) increased the stability of the liposomes in the course of thermal challenge. Furthermore, SLP was able to reduce the aggregation of liposomes in serum. Storage stability of liposomes was performed at 25 °C, 4 °C and -20 °C for 90 days. And the SLP-coated liposomes released less CF than the control liposomes during storage at the three evaluated temperatures. Our findings extended the application field of Lactobacillus SLPs and introduced a novel nanocarrier system with good chemical stability.

Improved Isolation of SlaA and SlaB S-layer proteins in Sulfolobus acidocaldarius

The Sulfolobus acidocaldarius S-layer is composed of two main proteins: SlaA, which forms the ordered structure of the S-layer matrix, and SlaB, which supports and anchors the S-layer into the tetraether lipid membrane. While SlaA has previously been purified by exploiting its thermotolerance and high resistance to detergents, SlaB has resisted isolation, particularly from the cell membrane. Removal of proteins other than those of the S-layer is especially difficult if large batch-scale culture volumes are unavailable. Here, we describe a benchtop-scale protocol for the purification of SlaA from S. acidocaldarius, enabling isolation of SlaB using size exclusion chromatography (gel filtration). Using this protocol, we were able to identify for the first time tetraether lipids strongly attached to SlaB via heat- and detergent-resistant interactions.

Curcumin- and Piperine-Loaded Emulsomes as Combinational Treatment Approach Enhance the Anticancer Activity of Curcumin on HCT116 Colorectal Cancer Model

Combination chemotherapy, administrating two chemotherapeutic agents concurrently, comes into prominence, as the heterogeneity or the level of the disease necessitates a collaborative action. Curcumin, isolated from turmeric, and piperine, isolated from black long pepper, are two dietary polyphenols studied for their intrinsic anti-cancer properties against various cancer types including colorectal cancer (CRC). Furthermore, piperine improves the therapeutic effect of curcumin. Addressing this mutual behavior, this study combines curcumin and piperine within emulsome nanoformulations. Curcumin- (CurcuEmulsomes) and piperine-loaded emulsomes (PiperineEmulsomes) have established a uniform, stable, spherical dispersion with average diameters of 184.21 and 248.76 nm, respectively. The solid tripalmitin inner core achieved encapsulation capacities of up to 0.10 mg/ml curcumin and 0.09 mg/ml piperine content. While piperine treatment alone - in its both free and emulsome forms - showed no inhibition in the proliferation of HCT116 cells in vitro, its presence as the second drug agent enhanced curcumin's effect. Combination of 7 μM PiperineEmulsome and 25 μM CurcuEmulsome concentrations was found to be most effective with an inhibition of cell proliferation of about 50% viability. Cell cycle arrest at G2/M phase and induced apoptosis verified the improved anti-cancer characteristics of the therapy. While CurcuEmulsomes achieved a fourfold increase in Caspase 3 level, combination of treatment with PiperineEulsomes achieved a sixfold increase in the level of this apoptotic marker. Combinational treatment of HCT116 cells with CurcuEmulsomes and PiperineEmulsomes improved the anticancer activity of the compounds and highlighted the potential of the approach for further in vivo studies.

Lipid-Based Antimicrobial Delivery-Systems for the Treatment of Bacterial Infections

Many nanotechnology-based antimicrobials and antimicrobial-delivery-systems have been developed over the past decades with the aim to provide alternatives to antibiotic treatment of infectious-biofilms across the human body. Antimicrobials can be loaded into nanocarriers to protect them against de-activation, and to reduce their toxicity and potential, harmful side-effects. Moreover, antimicrobial nanocarriers such as micelles, can be equipped with stealth and pH-responsive features that allow self-targeting and accumulation in infectious-biofilms at high concentrations. Micellar and liposomal nanocarriers differ in hydrophilicity of their outer-surface and inner-core. Micelles are self-assembled, spherical core-shell structures composed of single layers of surfactants, with hydrophilic head-groups and hydrophobic tail-groups pointing to the micellar core. Liposomes are composed of lipids, self-assembled into bilayers. The hydrophilic head of the lipids determines the surface properties of liposomes, while the hydrophobic tail, internal to the bilayer, determines the fluidity of liposomal-membranes. Therefore, whereas micelles can only be loaded with hydrophobic antimicrobials, hydrophilic antimicrobials can be encapsulated in the hydrophilic, aqueous core of liposomes and hydrophobic or amphiphilic antimicrobials can be inserted in the phospholipid bilayer. Nanotechnology-derived liposomes can be prepared with diameters <100-200 nm, required to prevent reticulo-endothelial rejection and allow penetration into infectious-biofilms. However, surface-functionalization of liposomes is considerably more difficult than of micelles, which explains while self-targeting, pH-responsive liposomes that find their way through the blood circulation toward infectious-biofilms are still challenging to prepare. Equally, development of liposomes that penetrate over the entire thickness of biofilms to provide deep killing of biofilm inhabitants still provides a challenge. The liposomal phospholipid bilayer easily fuses with bacterial cell membranes to release high antimicrobial-doses directly inside bacteria. Arguably, protection against de-activation of antibiotics in liposomal nanocarriers and their fusogenicity constitute the biggest advantage of liposomal antimicrobial carriers over antimicrobials free in solution. Many Gram-negative and Gram-positive bacterial strains, resistant to specific antibiotics, have been demonstrated to be susceptible to these antibiotics when encapsulated in liposomal nanocarriers. Recently, also progress has been made concerning large-scale production and long-term storage of liposomes. Therewith, the remaining challenges to develop self-targeting liposomes that penetrate, accumulate and kill deeply in infectious-biofilms remain worthwhile to pursue.

Slp-coated liposomes for drug delivery and biomedical applications: potential and challenges

Slp forms a crystalline array of proteins on the outermost envelope of bacteria and archaea with a molecular weight of 40-200 kDa. Slp can self-assemble on the surface of liposomes in a proper environment via electrostatic interactions, which could be employed to functionalize liposomes by forming Slp-coated liposomes for various applications. Among the molecular characteristics, the stability, adhesion, and immobilization of biomacromolecules are regarded as the most meaningful. Compared to plain liposomes, Slp-coated liposomes show excellent physicochemical and biological stabilities. Recently, Slp-coated liposomes were shown to specifically adhere to the gastrointestinal tract, which was attributed to the "ligand-receptor interaction" effect. Furthermore, Slp as a "bridge" can immobilize functional biomacromol-ecules on the surface of liposomes via protein fusion technology or intermolecular forces, endowing liposomes with beneficial functions. In view of these favorable features, Slp-coated liposomes are highly likely to be an ideal platform for drug delivery and biomedical uses. This review aims to provide a general framework for the structure and characteristics of Slp and the interactions between Slp and liposomes, to highlight the unique properties and drug delivery as well as the biomedical applications of the Slp-coated liposomes, and to discuss the ongoing challenges and perspectives.

Lipid-Based Antimicrobial Delivery-Systems for the Treatment of Bacterial Infections

Many nanotechnology-based antimicrobials and antimicrobial-delivery-systems have been developed over the past decades with the aim to provide alternatives to antibiotic treatment of infectious-biofilms across the human body. Antimicrobials can be loaded into nanocarriers to protect them against de-activation, and to reduce their toxicity and potential, harmful side-effects. Moreover, antimicrobial nanocarriers such as micelles, can be equipped with stealth and pH-responsive features that allow self-targeting and accumulation in infectious-biofilms at high concentrations. Micellar and liposomal nanocarriers differ in hydrophilicity of their outer-surface and inner-core. Micelles are self-assembled, spherical core-shell structures composed of single layers of surfactants, with hydrophilic head-groups and hydrophobic tail-groups pointing to the micellar core. Liposomes are composed of lipids, self-assembled into bilayers. The hydrophilic head of the lipids determines the surface properties of liposomes, while the hydrophobic tail, internal to the bilayer, determines the fluidity of liposomal-membranes. Therefore, whereas micelles can only be loaded with hydrophobic antimicrobials, hydrophilic antimicrobials can be encapsulated in the hydrophilic, aqueous core of liposomes and hydrophobic or amphiphilic antimicrobials can be inserted in the phospholipid bilayer. Nanotechnology-derived liposomes can be prepared with diameters <100-200 nm, required to prevent reticulo-endothelial rejection and allow penetration into infectious-biofilms. However, surface-functionalization of liposomes is considerably more difficult than of micelles, which explains while self-targeting, pH-responsive liposomes that find their way through the blood circulation toward infectious-biofilms are still challenging to prepare. Equally, development of liposomes that penetrate over the entire thickness of biofilms to provide deep killing of biofilm inhabitants still provides a challenge. The liposomal phospholipid bilayer easily fuses with bacterial cell membranes to release high antimicrobial-doses directly inside bacteria. Arguably, protection against de-activation of antibiotics in liposomal nanocarriers and their fusogenicity constitute the biggest advantage of liposomal antimicrobial carriers over antimicrobials free in solution. Many Gram-negative and Gram-positive bacterial strains, resistant to specific antibiotics, have been demonstrated to be susceptible to these antibiotics when encapsulated in liposomal nanocarriers. Recently, also progress has been made concerning large-scale production and long-term storage of liposomes. Therewith, the remaining challenges to develop self-targeting liposomes that penetrate, accumulate and kill deeply in infectious-biofilms remain worthwhile to pursue.

Single-Vesicle Assays Using Liposomes and Cell-Derived Vesicles: From Modeling Complex Membrane Processes to Synthetic Biology and Biomedical Applications

The plasma membrane is of central importance for defining the closed volume of cells in contradistinction to the extracellular environment. The plasma membrane not only serves as a boundary, but it also mediates the exchange of physical and chemical information between the cell and its environment in order to maintain intra- and intercellular functions. Artificial lipid- and cell-derived membrane vesicles have been used as closed-volume containers, representing the simplest cell model systems to study transmembrane processes and intracellular biochemistry. Classical examples are studies of membrane translocation processes in plasma membrane vesicles and proteoliposomes mediated by transport proteins and ion channels. Liposomes and native membrane vesicles are widely used as model membranes for investigating the binding and bilayer insertion of proteins, the structure and function of membrane proteins, the intramembrane composition and distribution of lipids and proteins, and the intermembrane interactions during exo- and endocytosis. In addition, natural cell-released microvesicles have gained importance for early detection of diseases and for their use as nanoreactors and minimal protocells. Yet, in most studies, ensembles of vesicles have been employed. More recently, new micro- and nanotechnological tools as well as novel developments in both optical and electron microscopy have allowed the isolation and investigation of individual (sub)micrometer-sized vesicles. Such single-vesicle experiments have revealed large heterogeneities in the structure and function of membrane components of single vesicles, which were hidden in ensemble studies. These results have opened enormous possibilities for bioanalysis and biotechnological applications involving unprecedented miniaturization at the nanometer and attoliter range. This review will cover important developments toward single-vesicle analysis and the central discoveries made in this exciting field of research.

Bacterial components as naturally inspired nano-carriers for drug/gene delivery and immunization: Set the bugs to work?

Drug delivery is a rapidly growing area of research motivated by the nanotechnology revolution, the ideal of personalized medicine, and the desire to reduce the side effects of toxic anti-cancer drugs. Amongst a bewildering array of different nanostructures and nanocarriers, those examples that are fundamentally bio-inspired and derived from natural sources are particularly preferred. Delivery of vaccines is also an active area of research in this field. Bacterial cells and their components that have been used for drug delivery, include the crystalline cell-surface layer known as "S-layer", bacterial ghosts, bacterial outer membrane vesicles, and bacterial products or derivatives (e.g. spores, polymers, and magnetic nanoparticles). Considering the origin of these components from potentially pathogenic microorganisms, it is not surprising that they have been applied for vaccines and immunization. The present review critically summarizes their applications focusing on their advantages for delivery of drugs, genes, and vaccines.

Preservation of Archaeal Surface Layer Structure During Mineralization

Proteinaceous surface layers (S-layers) are highly ordered, crystalline structures commonly found in prokaryotic cell envelopes that augment their structural stability and modify interactions with metals in the environment. While mineral formation associated with S-layers has previously been noted, the mechanisms were unconstrained. Using Sulfolobus acidocaldarius a hyperthermophilic archaeon native to metal-enriched environments and possessing a cell envelope composed only of a S-layer and a lipid cell membrane, we describe a passive process of iron phosphate nucleation and growth within the S-layer of cells and cell-free S-layer "ghosts" during incubation in a Fe-rich medium, independently of metabolic activity. This process followed five steps: (1) initial formation of mineral patches associated with S-layer; (2) patch expansion; (3) patch connection; (4) formation of a continuous mineral encrusted layer at the cell surface; (5) early stages of S-layer fossilization via growth of the extracellular mineralized layer and the mineralization of cytosolic face of the cell membrane. At more advanced stages of encrustation, encrusted outer membrane vesicles are formed, likely in an attempt to remove damaged S-layer proteins. The S-layer structure remains strikingly well preserved even upon the final step of encrustation, offering potential biosignatures to be looked for in the fossil record.

S-layers: principles and applications

Monomolecular arrays of protein or glycoprotein subunits forming surface layers (S-layers) are one of the most commonly observed prokaryotic cell envelope components. S-layers are generally the most abundantly expressed proteins, have been observed in species of nearly every taxonomical group of walled bacteria, and represent an almost universal feature of archaeal envelopes. The isoporous lattices completely covering the cell surface provide organisms with various selection advantages including functioning as protective coats, molecular sieves and ion traps, as structures involved in surface recognition and cell adhesion, and as antifouling layers. S-layers are also identified to contribute to virulence when present as a structural component of pathogens. In Archaea, most of which possess S-layers as exclusive wall component, they are involved in determining cell shape and cell division. Studies on structure, chemistry, genetics, assembly, function, and evolutionary relationship of S-layers revealed considerable application potential in (nano)biotechnology, biomimetics, biomedicine, and synthetic biology.

Reassembly of S-layer proteins

Crystalline bacterial cell surface layers (S-layers) represent the outermost cell envelope component in a broad range of bacteria and archaea. They are monomolecular arrays composed of a single protein or glycoprotein species and represent the simplest biological membranes developed during evolution. They are highly porous protein mesh works with unit cell sizes in the range of 3 to 30 nm, and pore sizes of 2 to 8 nm. S-layers are usually 5 to 20 nm thick (in archaea, up to 70 nm). S-layer proteins are one of the most abundant biopolymers on earth. One of their key features, and the focus of this review, is the intrinsic capability of isolated native and recombinant S-layer proteins to form self-assembled mono- or double layers in suspension, at solid supports, the air-water interface, planar lipid films, liposomes, nanocapsules, and nanoparticles. The reassembly is entropy-driven and a fascinating example of matrix assembly following a multistage, non-classical pathway in which the process of S-layer protein folding is directly linked with assembly into extended clusters. Moreover, basic research on the structure, synthesis, genetics, assembly, and function of S-layer proteins laid the foundation for their application in novel approaches in biotechnology, biomimetics, synthetic biology, and nanotechnology.

Biomimetic interfaces based on S-layer proteins, lipid membranes and functional biomolecules

Designing and utilization of biomimetic membrane systems generated by bottom-up processes is a rapidly growing scientific and engineering field. Elucidation of the supramolecular construction principle of archaeal cell envelopes composed of S-layer stabilized lipid membranes led to new strategies for generating highly stable functional lipid membranes at meso- and macroscopic scale. In this review, we provide a state-of-the-art survey of how S-layer proteins, lipids and polymers may be used as basic building blocks for the assembly of S-layer-supported lipid membranes. These biomimetic membrane systems are distinguished by a nanopatterned fluidity, enhanced stability and longevity and, thus, provide a dedicated reconstitution matrix for membrane-active peptides and transmembrane proteins. Exciting areas in the (lab-on-a-) biochip technology are combining composite S-layer membrane systems involving specific membrane functions with the silicon world. Thus, it might become possible to create artificial noses or tongues, where many receptor proteins have to be exposed and read out simultaneously. Moreover, S-layer-coated liposomes and emulsomes copying virus envelopes constitute promising nanoformulations for the production of novel targeting, delivery, encapsulation and imaging systems.

S-layer coated emulsomes as potential nanocarriers

The present study introduces a novel nanocarrier system comprising lipidic emulsomes and S-layer (fusion) proteins as functionalizing tools coating the surface. Emulsomes composed of a solid tripalmitin core and a phospholipid shell are created reproducibly with an average diameter of approximately 300 nm using temperature-controlled extrusion steps. Both wildtype (wt) and recombinant (r) S-layer protein SbsB of Geobacillus stearothermophilus PV72/p2 are capable of forming coherent crystalline envelope structures with oblique (p1) lattice symmetry, as evidenced by transmission electron microscopy. Upon coating with wtSbsB, positive charge of emulsomes shifts to a highly negative zeta potential, whereas those coated with rSbsB become charge neutral. This observation is attributed to the presence of a negatively charged glycan, the secondary cell wall polymer (SCWP), which is associated only with wtSbsB. The present study shows for the first time the ability of recombinant and wildtype S-layer proteins to cover the entire surface of emulsomes with its characteristic crystalline lattice. Furthermore, in vitro cell culture studies reveal that S-layer coated emulsomes can be uptaken by human liver carcinoma cells (HepG2) without showing any significant cytotoxicity over a wide range of concentrations. The utilization of S-layer fusion proteins equipped in a nanopatterned fashion by identical or diverse functions may lead to further development of emulsomes in nanomedicine, especially for drug delivery and targeting.

Construction of silica-enhanced S-layer protein cages

The work presented here shows for the first time that it is possible to silicify S-layer coated liposomes and to obtain stable functionalized hollow nano-containers. For this purpose, the S-layer protein of Geobacillus stearothermophilus PV72/p2 was recombinantly expressed and used for coating positively charged liposomes composed of dipalmitoylphosphatidylcholine, cholesterol and hexadecylamine in a molar ratio of 10:5:4. Subsequently, plain (uncoated) liposomes and S-layer coated liposomes were silicified. Determination of the charge of the constructs during silicification allowed the deposition process to be followed. After the particles had been silicified, lipids were dissolved by treatment with Triton X-100 with the release of previously entrapped fluorescent dyes being determined by fluorimetry. Both, ζ-potential and release experiments showed differences between silicified plain liposomes and silicified S-layer coated liposomes. The results of the individual preparation steps were examined by embedding the respective assemblies in resin, ultrathin sectioning and inspection by bright-field transmission electron microscopy (TEM). Energy filtered TEM confirmed the successful construction of S-layer based silica cages. It is anticipated that this approach will provide a key to enabling technology for the fabrication of nanoporous protein cages for applications ranging from nano medicine to materials science.

S-layer protein self-assembly

Crystalline S(urface)-layers are the most commonly observed cell surface structures in prokaryotic organisms (bacteria and archaea). S-layers are highly porous protein meshworks with unit cell sizes in the range of 3 to 30 nm, and thicknesses of ~10 nm. One of the key features of S-layer proteins is their intrinsic capability to form self-assembled mono- or double layers in solution, and at interfaces. Basic research on S-layer proteins laid foundation to make use of the unique self-assembly properties of native and, in particular, genetically functionalized S-layer protein lattices, in a broad range of applications in the life and non-life sciences. This contribution briefly summarizes the knowledge about structure, genetics, chemistry, morphogenesis, and function of S-layer proteins and pays particular attention to the self-assembly in solution, and at differently functionalized solid supports.

SbsB structure and lattice reconstruction unveil Ca2+ triggered S-layer assembly

S-layers are regular two-dimensional semipermeable protein layers that constitute a major cell-wall component in archaea and many bacteria. The nanoscale repeat structure of the S-layer lattices and their self-assembly from S-layer proteins (SLPs) have sparked interest in their use as patterning and display scaffolds for a range of nano-biotechnological applications. Despite their biological abundance and the technological interest in them, structural information about SLPs is limited to truncated and assembly-negative proteins. Here we report the X-ray structure of the SbsB SLP of Geobacillus stearothermophilus PV72/p2 by the use of nanobody-aided crystallization. SbsB consists of a seven-domain protein, formed by an amino-terminal cell-wall attachment domain and six consecutive immunoglobulin-like domains, that organize into a φ-shaped disk-like monomeric crystallization unit stabilized by interdomain Ca(2+) ion coordination. A Ca(2+)-dependent switch to the condensed SbsB quaternary structure pre-positions intermolecular contact zones and renders the protein competent for S-layer assembly. On the basis of crystal packing, chemical crosslinking data and cryo-electron microscopy projections, we present a model for the molecular organization of this SLP into a porous protein sheet inside the S-layer. The SbsB lattice represents a previously undescribed structural model for protein assemblies and may advance our understanding of SLP physiology and self-assembly, as well as the rational design of engineered higher-order structures for biotechnology.

Rapid liposome quality assessment using a lab-on-a-chip

Although liposomes have many outstanding features such as biocompatibility, biodegradability, low toxicity and structural diversity, and are successfully applied in many areas of chemistry and biotechnology, a lack of characterization standards and quality control tools are still inhibiting the translation of liposome technology into clinical routine. The greatest obstacle to clinical scale commercialization is the inability to ensure liposome formulation stability because small size variations or altered surface chemistries can significantly influence in vivo distribution and excretion kinetics that could in turn lead to unpredictable therapy outcomes. To enhance the product development process we have developed a microfluidic biochip containing embedded dielectric microsensors capable of providing quantitative results on formulation composition and stability based on the monitoring of the unique electric properties of liposomes. Computational fluid dynamic (CFD) simulations confirmed that microfluidics offer reproducible and well-defined measurement conditions where a moving liposome suspension within a microchannel behaves like a bulk material. Results of this study demonstrate the ability of microfluidics, in combination with dielectric spectroscopy and multivariate data analysis methods, to identify nine different liposomes. We also show that various liposome modifications such as membrane-bound surface proteins, lipid bilayer soluble drugs, as well as protein and dye encapsulations, can be detected in the absence of any labels or indicators. Since shelf-life stability of a liposome formulation is regarded of prime importance for regulatory approval and clinical application, we further provide a possible practical application of the developed liposome analysis platform as a high-throughput tool for industrial quality insurance purposes.

Monte Carlo study of the molecular mechanisms of surface-layer protein self-assembly

The molecular mechanisms guiding the self-assembly of proteins into functional or pathogenic large-scale structures can be only understood by studying the correlation between the structural details of the monomer and the eventual mesoscopic morphologies. Among the myriad structural details of protein monomers and their manifestations in the self-assembled morphologies, we seek to identify the most crucial set of structural features necessary for the spontaneous selection of desired morphologies. Using a combination of the structural information and a Monte Carlo method with a coarse-grained model, we have studied the functional protein self-assembly into S(surface)-layers, which constitute the crystallized outer most cell envelope of a great variety of bacterial cells. We discover that only few and mainly hydrophobic amino acids, located on the surface of the monomer, are responsible for the formation of a highly ordered anisotropic protein lattice. The coarse-grained model presented here reproduces accurately many experimentally observed features including the pore formation, chemical description of the pore structure, location of specific amino acid residues at the protein-protein interfaces, and surface accessibility of specific amino acid residues. In addition to elucidating the molecular mechanisms and explaining experimental findings in the S-layer assembly, the present work offers a tool, which is chemical enough to capture details of primary sequences and coarse-grained enough to explore morphological structures with thousands of protein monomers, to promulgate design rules for spontaneous formation of specific protein assemblies.

Nanobiotechnology with S-layer proteins as building blocks

One of the key challenges in nanobiotechnology is the utilization of self- assembly systems, wherein molecules spontaneously associate into reproducible aggregates and supramolecular structures. In this contribution, we describe the basic principles of crystalline bacterial surface layers (S-layers) and their use as patterning elements. The broad application potential of S-layers in nanobiotechnology is based on the specific intrinsic features of the monomolecular arrays composed of identical protein or glycoprotein subunits. Most important, physicochemical properties and functional groups on the protein lattice are arranged in well-defined positions and orientations. Many applications of S-layers depend on the capability of isolated subunits to recrystallize into monomolecular arrays in suspension or on suitable surfaces (e.g., polymers, metals, silicon wafers) or interfaces (e.g., lipid films, liposomes, emulsomes). S-layers also represent a unique structural basis and patterning element for generating more complex supramolecular structures involving all major classes of biological molecules (e.g., proteins, lipids, glycans, nucleic acids, or combinations of these). Thus, S-layers fulfill key requirements as building blocks for the production of new supramolecular materials and nanoscale devices as required in molecular nanotechnology, nanobiotechnology, biomimetics, and synthetic biology.

Composite S-layer lipid structures

Designing and utilization of biomimetic membrane systems generated by bottom-up processes is a rapidly growing scientific and engineering field. Elucidation of the supramolecular construction principle of archaeal cell envelopes composed of S-layer stabilized lipid membranes led to new strategies for generating highly stable functional lipid membranes at meso- and macroscopic scale. In this review, we provide a state of the art survey how S-layer proteins, lipids, and polysaccharides may be used as basic building blocks for the assembly of S-layer supported lipid membranes. These biomimetic membrane systems are distinguished by a nanopatterned fluidity, enhanced stability and longevity and thus, provide a dedicated reconstitution matrix for membrane-active peptides and transmembrane proteins. Exciting areas for application of composite S-layer membrane systems concern sensor systems involving specific membrane functions.

Solid supported lipid membranes: new concepts for the biomimetic functionalization of solid surfaces

Surface-layer (S-layer) supported lipid membranes on solid substrates are interfacial architectures mimicking the supramolecular principle of cell envelopes which have been optimized for billions of years of evolution in most extreme habitats. The authors implement this biological construction principle in a variety of layered supramolecular architectures consisting of a stabilizing protein monolayer and a functional phospholipid bilayer for the design and development of new types of solid-supported biomimetic membranes with a considerably extended stability and lifetime-compared to existing platforms-as required for novel types of bioanalytical sensors. First, Langmuir monolayers of lipids at the water/air interface are used as test beds for the characterization of different types of molecules which all interact with the lipid layers in various ways and, hence, are relevant for the control of the structure, stability, and function of supported membranes. As an example, the interaction of S-layer proteins from the bulk phase with a monolayer of a phospholipid synthetically conjugated with a secondary cell wall polymer (SCWP) was studied as a function of the packing density of the lipids in the monolayer. Furthermore, SCWPs were used as a new molecular construction element. The exploitation of a specific lectin-type bond between the N-terminal part of selected S-layer proteins and a variety of glycans allowed for the buildup of supramolecular assemblies and thus functional membranes with a further increased stability. Next, S-layer proteins were self-assembled and characterized by the surface-sensitive techniques, surface plasmon resonance spectroscopy and quartz crystal microbalance with dissipation monitoring. The substrates were either planar gold or silicon dioxide sensor surfaces. The assembly of S-layer proteins from solution to solid substrates could nicely be followed in-situ and in real time. As a next step toward S-layer supported bilayer membranes, the authors characterized various architectures based on lipid molecules that were modified by a flexible spacer separating the amphiphiles from the anchor group that allows for a covalent coupling of the lipid to a solid support, e.g., using thiols for Au substrates. Impedance spectroscopy confirmed the excellent charge barrier properties of these constructs with a high electrical resistance. Structural details of various types of these tethered bimolecular lipid membranes were studied by using neutron reflectometry. Finally, first attempts are reported to develop a code based on a SPICE network analysis program which is suitable for the quantitative analysis of the transient and steady-state currents passing through these membranes upon the application of a potential gradient.

Novel biocatalysts based on S-layer self-assembly of Geobacillus stearothermophilus NRS 2004/3a: a nanobiotechnological approach

The crystalline cell-surface (S) layer sgsE of Geobacillus stearothermophilus NRS 2004/3a represents a natural protein self-assembly system with nanometer-scale periodicity that is evaluated as a combined carrier/patterning element for the conception of novel types of biocatalyst aiming at the controllable display of biocatalytic epitopes, storage stability, and reuse. The glucose-1-phosphate thymidylyltransferase RmlA is used as a model enzyme and chimeric proteins are constructed by translational fusion of rmlA to the C-terminus of truncated forms of sgsE (rSgsE (131-903), rSgsE(331-903)) and used for the construction of three principal types of biocatalysts: soluble (monomeric), self-assembled in aqueous solution, and recrystallized on negatively charged liposomes. Enzyme activity of the biocatalysts reaches up to 100 % compared to sole RmlA cloned from the same bacterium. The S-layer portion of the biocatalysts confers significantly improved shelf life to the fused enzyme without loss of activity over more than three months, and also enables biocatalyst recycling. These nanopatterned composites may open up new functional concepts for biocatalytic applications in nanobiotechnology.

Are S-layers exoskeletons? The basic function of protein surface layers revisited

Surface protein or glycoprotein layers (S-layers) are common structures of the prokaryotic cell envelope. They are either associated with the peptidoglycan or outer membrane of bacteria, and constitute the only cell wall component of many archaea. Despite their occurrence in most of the phylogenetic branches of microorganisms, the functional significance of S-layers is assumed to be specific for genera or groups of organisms in the same environment rather than common to all prokaryotes. Functional aspects have usually been investigated with isolated S-layer sheets or proteins, which disregards the interactions between S-layers and the underlying cell envelope components. This study discusses the synergistic effects in cell envelope assemblies, the hypothetical role of S-layers for cell shape formation, and the existence of a common function in view of new insights.

Characterization of liposomes coated with S-layer proteins from lactobacilli

The stability of liposomes coated with S-layer proteins from Lactobacillus brevis and Lactobacillus kefir was analyzed as a previous stage to the development of a vaccine vehicle for oral administration. The interactions of the different S-layer proteins with positively charged liposomes prepared with soybean lecithin or dipalmitoylphosphatidylcholine were studied by means of the variation of the Z potential at different protein-lipid ratios, showing that both proteins were able to attach in a greater extent to the surface of soybean lecithin liposomes. The capacity of these particles to retain carboxyfluorescein or calcein by exposure to bile salts, pancreatic extract, pH change and after a thermal shock showed that both S-layer proteins increased the stability of the liposomes in the same magnitude. The non-glycosylated protein from L. brevis protects more efficiently the liposomes at pH 7 than those from L. kefir even without treatment with glutaraldehyde.

S-layers as a tool kit for nanobiotechnological applications

Crystalline bacterial cell surface layers (S-layers) have been identified in a great number of different species of bacteria and represent an almost universal feature of archaea. Isolated native S-layer proteins and S-layer fusion proteins incorporating functional sequences self-assemble into monomolecular crystalline arrays in suspension, on a great variety of solid substrates and on various lipid structures including planar membranes and liposomes. S-layers have proven to be particularly suited as building blocks and patterning elements in a biomolecular construction kit involving all major classes of biological molecules (proteins, lipids, glycans, nucleic acids and combinations of them) enabling innovative approaches for the controlled 'bottom-up' assembly of functional supramolecular structures and devices. Here, we review the basic principles of S-layer proteins and the application potential of S-layers in nanobiotechnology and biomimetics including life and nonlife sciences.

Crystalline Protein Domains and Lipid Bilayer Vesicle Shape Transformations

Cellular membranes can take on a variety of shapes to assist biological processes including endocytosis. Membrane-associated protein domains provide a possible mechanism for determining membrane curvature. We study the effect of tethered streptavidin protein crystals on the curvature of giant unilamellar vesicles (GUVs) using confocal, fluorescence, and differential interference contrast microscopy. Above a critical protein concentration, streptavidin domains align and percolate as they form, deforming GUVs into prolate spheroidal shapes in a size-dependent fashion. We propose a mechanism for this shape transformation based on domain growth and jamming. Osmotic deflation of streptavidin-coated GUVs reveals that the relatively rigid streptavidin protein domains resist membrane bending. Moreover, in contrast to highly curved protein domains that facilitate membrane budding, the relatively flat streptavidin domains prevent membrane budding under high osmotic stress. Thus, crystalline streptavidin domains are shown to have a stabilizing effect on lipid membranes. Our study gives insight into the mechanism for protein-mediated stabilization of cellular membranes.

A functional chimaeric S-layer-enhanced green fluorescent protein to follow the uptake of S-layer-coated liposomes into eukaryotic cells

The chimaeric gene encoding a C-terminally truncated form of the S-layer protein SbpA of Bacillus sphaericus CCM 2177 and the EGFP (enhanced green fluorescent protein) was ligated into plasmid pET28a and cloned and expressed in Escherichia coli. Just 1 h after induction of expression an intense EGFP fluorescence was detected in the cytoplasm of the host cells. Expression at 28 degrees C instead of 37 degrees C resulted in clearly increased fluorescence intensity, indicating that the folding process of the EGFP moiety was temperature sensitive. To maintain the EGFP fluorescence, isolation of the fusion protein from the host cells had to be performed in the presence of reducing agents. SDS/PAGE analysis, immunoblotting and N-terminal sequencing of the isolated and purified fusion protein confirmed the presence of both the S-layer protein and the EGFP moiety. The fusion protein had maintained the ability to self-assemble in suspension and to recrystallize on peptidoglycan-containing sacculi or on positively charged liposomes, as well as to fluoresce. Comparison of fluorescence excitation and emission spectra of recombinant EGFP and rSbpA(31-1068)/EGFP revealed identical maxima at 488 and 507 nm respectively. The uptake of liposomes coated with a fluorescent monomolecular protein lattice of rSbpA(31-1068)/EGFP into HeLa cells was studied by confocal laser-scanning microscopy. The major part of the liposomes was internalized within 2 h of incubation and entered the HeLa cells by endocytosis.

S-layer-streptavidin fusion proteins as template for nanopatterned molecular arrays

Biomolecular self-assembly can be used as a powerful tool for nanoscale engineering. In this paper, we describe the development of building blocks for nanobiotechnology, which are based on the fusion of streptavidin to a crystalline bacterial cell surface layer (S-layer) protein with the inherent ability to self-assemble into a monomolecular protein lattice. The fusion proteins and streptavidin were produced independently in Escherichia coli, isolated, and mixed to refold and purify heterotetramers of 1:3 stoichiometry. Self-assembled chimeric S-layers could be formed in suspension, on liposomes, on silicon wafers, and on accessory cell wall polymer containing cell wall fragments. The two-dimensional protein crystals displayed streptavidin in defined repetitive spacing, and they were capable of binding d-biotin and biotinylated proteins. Therefore, the chimeric S-layer can be used as a self-assembling nanopatterned molecular affinity matrix to arrange biotinylated compounds on a surface. In addition, it has application potential as a functional coat of liposomes.

A recombinant bacterial cell surface (S-layer)-major birch pollen allergen-fusion protein (rSbsC/Bet v1) maintains the ability to self-assemble into regularly structured monomolecular lattices and the functionality of the allergen

The mature crystalline bacterial cell surface (S-layer) protein SbsC of Bacillus stearothermophilus ATCC 12980 comprises amino acids 31-1099 and assembles into an oblique lattice type. As the deletion of up to 179 C-terminal amino acids did not interfere with the self-assembly properties of SbsC, the sequence encoding the major birch pollen allergen (Bet v1) was fused to the sequence encoding the truncated form rSbsC(31-920). The S-layer fusion protein, termed rSbsC/Bet v1, maintained the ability to self-assemble into flat sheets and open-ended cylinders. The presence and the functionality of the fused Bet v1 sequence was proved by blot experiments using BIP1, a monoclonal antibody against Bet v1 and Bet v1-specific IgE-containing serum samples from birch pollen allergic patients. The location and accessibility of the allergen moiety on the outer surface of the S-layer lattice were demonstrated by immunogold labeling of the rSbsC/Bet v1 monolayer, which was obtained by oriented recrystallization of the S-layer fusion protein on native cell wall sacculi. Thereby, the specific interactions between the N-terminal part of SbsC and a distinct type of secondary cell wall polymer were exploited. This is the first S-layer fusion protein described that had retained the specific properties of the S-layer protein moiety in addition to those of the fused functional peptide sequence.

Improving ultrasound reflectivity and stability of echogenic liposomal dispersions for use as targeted ultrasound contrast agents

Targeted echogenic liposome dispersions for ultrasonic enhancement of vasoactive and pathological components of endothelium and atherosclerosis have recently been developed. The component lipids required for acoustic and targeting properties include phosphatidylcholine, phosphatidylethanolamine phosphatidylglycerol (PG), and cholesterol (CH), initially in a 60:8:2:30 mol % ratio. Component lipids, lyophilization, sugars, and freezing conditions were varied to optimize acoustic ultrasound reflectivity and acoustic stability. Echogenic liposome dispersions were made by using the dehydration-rehydration process. The lipid concentrations were varied (CH in the range 1 to 40 mol % and PG from 1 to 16 mol %). Variations in type and concentration of sugars were examined. The effect of freezing conditions and re-lyophilization was examined. Ultrasound reflectivity was assessed by using a 20-MHz intravascular ultrasound catheter and computer-assisted videodensitometry. Ultrasound reflectivity was optimized at a CH concentration of 10 mol %; PG concentration variation had essentially no effect on initial values of echogenicity. Optimal acoustic stability was observed with concentrations of 10-15 mol % CH and with a PG concentration greater than 4 mol %. Preparations made with 0.2 M mannitol were more ultrasound reflective than those made with lactose, trehalose, and sucrose. Re-lyophilization and freezing temperatures below -20 degrees C increased ultrasound reflectivity. We optimized the ultrasound properties of echogenic liposomal dispersions, the conditions of which provide some insight into the underlying lipid structures responsible. The preparations developed are now more stable and acoustically reflective than our previous preparations. This advances the development of echogenic lipid dispersions as targeted ultrasound contrast agents for use in general ultrasound as well as cardiovascular imaging.

S-layer-supported lipid membranes

Many prokaryotic organisms (archaea and bacteria) are covered by a regularly ordered surface layer (S-layer) as the outermost cell wall component. S-layers are built up of a single protein or glycoprotein species and represent the simplest biological membrane developed during evolution. Pores in S-layers are of regular size and morphology, and functional groups on the protein lattice are aligned in well-defined positions and orientations. Due to the high degree of structural regularity S-layers represent unique systems for studying the structure, morphogenesis, and function of layered supramolecular assemblies. Isolated S-layer subunits of numerous organisms are able to assemble into monomolecular arrays either in suspension, at air/water interfaces, on planar mono- and bilayer lipid films, on liposomes and on solid supports (e.g. silicon wafers). Detailed studies on composite S-layer/lipid structures have been performed with Langmuir films, freestanding bilayer lipid membranes, solid supported lipid membranes, and liposomes. Lipid molecules in planar films and liposomes interact via their head groups with defined domains on the S-layer lattice. Electrostatic interactions are the most prevalent forces. The hydrophobic chains of the lipid monolayers are almost unaffected by the attachment of the S-layer and no impact on the hydrophobic thickness of the membranes has been observed. Upon crystallization of a coherent S-layer lattice on planar and vesicular lipid membranes, an increase in molecular order is observed, which is reflected in a decrease of the membrane tension and an enhanced mobility of probe molecules within an S-layer-supported bilayer. Thus, the terminology 'semifluid membrane' has been introduced for describing S-layer-supported lipid membranes. The most important feature of composite S-layer/lipid membranes is an enhanced stability in comparison to unsupported membranes.

S-layer-coated liposomes as a versatile system for entrapping and binding target molecules

In the present study, unilamellar liposomes coated with the crystalline bacterial cell surface layer (S-layer) protein of Bacillus stearothermophilus PV72/p2 were used as matrix for defined binding of functional molecules via the avidin- or streptavidin-biotin bridge. The liposomes were composed of dipalmitoyl phosphatidylcholine, cholesterol and hexadecylamine in a molar ratio of 10:5:4 and they had an average size of 180 nm. For introducing specific functions into the S-layer lattice without affecting substances encapsulated within the liposomes, crosslinking and activation reagents had to be identified which did not penetrate the liposomal membrane. Among different reagents, a hydrophilic dialdehyde generated by periodate cleavage of raffinose and a sulfo-succinimide activated dicarboxylic acid were found to be impermeable for the liposomal membrane. Both reagents completely crosslinked the S-layer lattice without interfering with its regular structure. Biotinylation of S-layer-coated liposomes was achieved by coupling p-diazobenzoyl biocytin which preferably reacts with the phenolic residue of tyrosine or with the imidazole ring of histidine. By applying this method, two biotin residues accessible for subsequent avidin binding were introduced per S-layer subunit. As visualized by labeling with biotinylated ferritin, an ordered monomolecular layer of streptavidin was formed on the surface of the S-layer-coated liposomes. As a second model system, biotinylated anti-human IgG was attached via the streptavidin bridge to the biotinylated S-layer-coated liposomes. The biological activity of the bound anti-human IgG was confirmed by ELISA.