The DNA injection apparatus of phage p22

Visualizing the structural changes of bacteriophage Epsilon15 and its Salmonella host during infection

The efficient mechanism by which double-stranded DNA bacteriophages deliver their chromosome across the outer membrane, cell wall, and inner membrane of Gram-negative bacteria remains obscure. Advances in single-particle electron cryomicroscopy have recently revealed details of the organization of the DNA injection apparatus within the mature virion for various bacteriophages, including epsilon15 (ɛ15) and P-SSP7. We have used electron cryotomography and three-dimensional subvolume averaging to capture snapshots of ɛ15 infecting its host Salmonella anatum. These structures suggest the following stages of infection. In the first stage, the tailspikes of ɛ15 attach to the surface of the host cell. Next, ɛ15's tail hub attaches to a putative cell receptor and establishes a tunnel through which the injection core proteins behind the portal exit the virion. A tube spanning the periplasmic space is formed for viral DNA passage, presumably from the rearrangement of core proteins or from cellular components. This tube would direct the DNA into the cytoplasm and protect it from periplasmic nucleases. Once the DNA has been injected into the cell, the tube and portal seals, and the empty bacteriophage remains at the cell surface.

Determination of stoichiometry and conformational changes in the first step of the P22 tail assembly

Large oligomeric portal assemblies have a central role in the life-cycles of bacteriophages and herpesviruses. The stoichiometry of in vitro assembled portal proteins has been a subject of debate for several years. The intrinsic polymorphic oligomerization of ectopically expressed portal proteins makes it possible to form rings of diverse stoichiometry (e.g., 11-mer, 12-mer, 13-mer, etc.) in solution. In this study, we have investigated the stoichiometry of the in vitro-assembled portal protein of bacteriophage P22 and characterized its association with the tail factor gp4. Using native mass spectrometry, we show for the first time that the reconstituted portal protein (assembled in vitro using a modified purification and assembly protocol) is exclusively dodecameric. Under the conditions used here, 12 copies of tail factor gp4 bind to the portal ring, in a cooperative fashion, to form a 12:12 complex of 1.050 MDa. We applied tandem mass spectrometry to the complete assembly and found an unusual dimeric dissociation pattern of gp4, suggesting a dimeric sub-organization of gp4 when assembled with the portal ring. Furthermore, native and ion mobility mass spectrometry reveal a major conformational change in the portal upon binding of gp4. We propose that the gp4-induced conformational change in the portal ring initiates a cascade of events assisting in the stabilization of newly filled P22 particles, which marks the end of phage morphogenesis.

Binding-induced stabilization and assembly of the phage P22 tail accessory factor gp4

To infect and replicate, bacteriophage P22 injects its 43 kbp genome across the cell wall of Salmonella enterica serovar Typhimurium. The attachment of phage P22 to the host cell as well as the injection of the viral DNA into the host is mediated by the virion's tail complex. This 2.8 MDa molecular machine is formed by five proteins, which include the portal protein gp1, the adhesion tailspike protein gp9, and three tail accessory factors: gp4, gp10, gp26. We have isolated the tail accessory factor gp4 and characterized its structure and binding interactions with portal protein. Interestingly, gp4 exists in solution as a monomer, which displays an exceedingly low structural stability (Tm 34 degrees C). Unfolded gp4 is prone to aggregation within a narrow range of temperatures both in vitro and in Salmonella extracts. In the virion the thermal unfolding of gp4 is prevented by the interaction with the dodecameric portal protein, which stabilizes the structure of gp4 and suppresses unfolded gp4 from irreversibly aggregating in the Salmonella milieu. The structural stabilization of gp4 is accompanied by the concomitant oligomerization of the protein to form a ring of 12 subunits bound to the lower end of the portal ring. The interaction of gp4 with portal protein is complex and likely involves the distinct binding of two non-equivalent sets of six gp4 proteins. Binding of the first set of six gp4 equivalents to dodecameric portal protein yields a gp(1)12:gp(4)6 assembly intermediate, which is stably populated at 30 degrees C and can be resolved by native gel electrophoresis. The final product of the assembly reaction is a bi-dodecameric gp(1)12:gp(4)12 complex, which appears hollow by electron microscopy, suggesting that gp4 does not physically plug the DNA entry/exit channel, but acts as a structural adaptor for the other tail accessory factors: gp10 and gp26.

Cryo-EM asymmetric reconstruction of bacteriophage P22 reveals organization of its DNA packaging and infecting machinery

The mechanisms by which most double-stranded DNA viruses package and release their genomic DNA are not fully understood. Single particle cryo-electron microscopy and asymmetric 3D reconstruction reveal the organization of the complete bacteriophage P22 virion, including the protein channel through which DNA is first packaged and later ejected. This channel is formed by a dodecamer of portal proteins and sealed by a tail hub consisting of two stacked barrels capped by a protein needle. Six trimeric tailspikes attached around this tail hub are kinked, suggesting a functional hinge that may be used to trigger DNA release. Inside the capsid, the portal's central channel is plugged by densities interpreted as pilot/injection proteins. A short rod-like density near these proteins may be the terminal segment of the dsDNA genome. The coaxially packed DNA genome is encapsidated by the icosahedral shell. This complete structure unifies various biochemical, genetic, and crystallographic data of its components from the past several decades.

Crystallogenesis of bacteriophage P22 tail accessory factor gp26 at acidic and neutral pH

Gp26 is one of three phage P22-encoded tail accessory factors essential for stabilization of viral DNA within the mature capsid. In solution, gp26 exists as an extended triple-stranded coiled-coil protein which shares profound structural similarities with class I viral membrane-fusion protein. In the cryo-EM reconstruction of P22 tail extracted from mature virions, gp26 forms an approximately 220 angstroms extended needle structure emanating from the neck of the tail, which is likely to be brought into contact with the cell's outer membrane when the viral DNA-injection process is initiated. To shed light on the potential role of gp26 in cell-wall penetration and DNA injection, gp26 has been crystallized at acidic, neutral and alkaline pH. Crystals of native gp26 grown at pH 4.6 diffract X-rays to 2.0 angstroms resolution and belong to space group P2(1), with a dimer of trimeric gp26 molecules in the asymmetric unit. To study potential pH-induced conformational changes in the gp26 structure, a chimera of gp26 fused to maltose-binding protein (MBP-gp26) was generated. Hexagonal crystals of MBP-gp26 were obtained at neutral and alkaline pH using the high-throughput crystallization robot at the Hauptman-Woodward Medical Research Institute, Buffalo, NY, USA. These crystals diffract X-rays to beyond 2.0 angstroms resolution. Structural analysis of gp26 crystallized at acidic, neutral and alkaline pH is in progress.

Three-dimensional structure of the bacteriophage P22 tail machine

The tail of the bacteriophage P22 is composed of multiple protein components and integrates various biological functions that are crucial to the assembly and infection of the phage. The three-dimensional structure of the P22 tail machine determined by electron cryo-microscopy and image reconstruction reveals how the five types of polypeptides present as 51 subunits are organized into this molecular machine through twelve-, six- and three-fold symmetry, and provides insights into molecular events during host cell attachment and phage DNA translocation.

Bacteriophage P22 Tail Accessory Factor GP26 Is a Long Triple-stranded Coiled-coil

P22 is a well characterized tailed bacteriophage that infects Salmonella enterica serovar Typhimurium. It is characterized by a "short" tail, which is formed by five proteins: the dodecameric portal protein (gp1), three tail accessory factors (gp4, gp10, gp26), and six trimeric copies of the tail-spike protein (gp9). We have isolated the gene encoding tail accessory factor gp26, which is responsible for stabilization of viral DNA within the mature phage, and using a variety of biochemical and biophysical techniques we show that gp26 is very likely a triple stranded coiled-coil protein. Electron microscopic examination of purified gp26 indicates that the protein adopts a rod-like structure approximately 210 angstroms in length. This trimeric rod displays an exceedingly high intrinsic thermostability (T(m) approximately 85 degrees C), which suggests a potentially important structural role within the phage tail apparatus. We propose that gp26 forms the thin needle-like fiber emanating from the base of the P22 neck that has been observed by electron microscopy of negatively stained P22 virions. By analogy with viral trimeric coiled-coil class I membrane fusion proteins, gp26 may represent the membrane-penetrating device used by the phage to pierce the host outer membrane.

Understanding viral partitioning in two-phase aqueous nonionic micellar systems: 1. Role of attractive interactions between viruses and micelles

The partitioning behavior of viruses in the two-phase aqueous nonionic n-decyl tetra(ethylene oxide) (C10E4) micellar system cannot be fully explained by considering solely the repulsive, steric, excluded-volume interactions that operate between the viruses and the nonionic C10E4 micelles. Specifically, an excluded-volume theory developed recently by our group is not able to quantitatively predict the observed viral partition coefficients, even though this theory is capable of providing reasonable quantitative predictions of protein partition coefficients. To shed light on the discrepancy between the theoretically predicted and the experimentally measured viral partition coefficients, a central assumption underlying the excluded-volume theory that the viruses and the C10E4 micelles interact solely through repulsive, excluded-volume interactions was challenged in this study. In particular, utilizing bacteriophage P22 as a model virus, a competitive inhibition test and a partitioning study of the capsids of bacteriophage P22 were conducted. Based on the results of these two experimental studies, it was concluded that any attractive interactions between the tailspikes of bacteriophage P22 and the C10E4 micelles are negligible. Another experimental study was carried out wherein the partition coefficients of the model viruses, bacteriophages P22 and T4, were measured at various temperatures, and compared with those previously obtained for bacteriophage phiX174. This comparison also indicated that possible attractive, electromagnetic-induced interactions between the bacteriophage particles and the C10E4 micelles cannot be invoked to rationalize the observed discrepancy between the theoretically predicted and the experimentally measured viral partition coefficients.

Structural organisation of the head-to-tail interface of a bacterial virus

In tailed icosahedral bacteriophages the connection between the 5-fold symmetric environment of the portal vertex in the capsid and the 6-fold symmetric phage tail is formed by a complex interface structure. The current study provides the detailed analysis of the assembly and structural organisation of such an interface within a phage having a long tail. The region of the interface assembled as part of the viral capsid (connector) was purified from DNA-filled capsids of the Bacillus subtilis bacteriophage SPP1. It is composed of oligomers of gp6, the SPP1 portal protein, of gp15, and of gp16. The SPP1 connector structure is formed by a mushroom-like portal protein whose cap faces the interior of the viral capsid in intact virions, an annular structure below the stem of the mushroom, and a second narrower annulus that is in direct contact with the helical tail extremity. The layered arrangement correlates to the stacking of gp6, gp15, and gp16 on top of the tail. The gp16 ring is exposed to the virion outside. During SPP1 morphogenesis, gp6 participates in the procapsid assembly reaction, an early step in the assembly pathway, while gp15 and gp16 bind to the capsid portal vertex after viral chromosome encapsidation. gp16 is processed during or after tail attachment to the connector region. The portal protein gp6 has 12-fold cyclical symmetry in the connector structure, whereas assembly-naïve gp6 exhibits 13-fold symmetry. We propose that it is the interaction of gp6 with other viral morphogenetic proteins that drives its assembly into the 12-mer state.

Prevalence of temperature sensitive folding mutations in the parallel beta coil domain of the phage P22 tailspike endorhamnosidase

Temperature sensitive mutations fall into two general classes: tl mutations, which render the mature protein thermolabile, and tsf (temperature sensitive folding) mutations, which destabilize an intermediate in the folding pathway without altering the functions of the folded state. The molecular defects caused by tsf mutations have been intensively studied for the elongated tailspike endorhamnosidase of Salmonella phage P22. The tailspike, responsible for host cell recognition and attachment, contains a 13 strand parallel beta coil domain. A set of tsf mutants located in the beta coil domain have been shown to cause folding defects in the in vivo folding pathway for the tailspike. We report here additional data on 17 other temperature sensitive mutants which are in the beta coil domain. Using mutant proteins formed at low temperature, the essential functions of assembling on the phage head, and binding to the O-antigen lipopolysaccharide (LPS) receptor of Salmonella were examined at high temperatures. All of the mutant proteins once folded at permissive temperature, were functional at restrictive temperatures. When synthesized at restrictive temperature the mutant chains formed an early folding intermediate, but failed to reach the mature conformation, accumulating instead in the aggregated inclusion body state. Thus this set of mutants all have the temperature sensitive folding phenotype. The prevalence of tsf mutants in the parallel beta coil domain presumably reflects properties of its folding intermediates. The key property may be the tendency of the intermediate to associate off pathway to the kinetically trapped inclusion body state.

Nucleotide sequence of the bacteriophage P22 genes required for DNA packaging

The mechanism of DNA packaging by dsDNA viruses is not well understood in any system. In bacteriophage P22 only five genes are required for successful condensation of DNA within the capsid. The products of three of these genes, the portal, scaffolding, and coat proteins, are structural components of the precursor particle, and two, the products of genes 2 and 3, are not. The scaffolding protein is lost from the structure during packaging, and only the portal and coat proteins are present in the mature virus particle. These five genes map in a contiguous cluster at the left end of the P22 genetic map. Three additional genes, 4, 10, and 26, are required for stabilizing of the condensed DNA within the capsid. In this report we present the nucleotide sequence of 7461 bp of P22 DNA that contains the five genes required for DNA condensation, as well as a nonessential open reading frame (ORF109), gene 4, and a portion of gene 10. N-terminal amino acid sequencing of the encoded proteins accurately located the translation starts of six genes in the sequence. Despite the fact that most of these proteins have striking analogs in the other dsDNA bacteriophage groups, which perform highly analogous functions, no amino acid sequence similarity between these analogous proteins has been found, indicating either that they diverged a very long time ago or that they are the products of spectacular convergent evolution.

Novel second-site suppression of a cold-sensitive defect in phage P22 procapsid assembly

The DNA packaging portal of the phage P22 procapsid is formed of 12 molecules of the 90,000 dalton gene 1 protein. The assembly of this dodecameric complex at a unique capsid vertex requires scaffolding subunits. The mechanism that ensures the location of the 12-fold symmetrical portal at only one of the 12 5-fold vertices of an icosahedral virus capsid presents a unique assembly problem, which, in some viruses, is solved by the portal also acting as initiator of procapsid assembly. Phage P22 procapsids, however, are formed in the absence of the portal protein. The 1-csH137 mutation prevents the incorporation of the portal protein into procapsids. In a mixed infection with cs+ phage, the mutant subunits are able to form functional portals, suggesting that the cold-sensitivity does not affect portal-portal interactions, but affects the interaction of portal subunits with some other molecular species involved in the initiation of portal assembly. Interestingly, the cs defect is suppressed by temperature-sensitive folding mutations at four sites in the P22 tailspike gene 9. The suppression is allele-specific; other tailspike tsf mutations fail to suppress the cs defect. Translation through a suppressor site is required for suppression. This observation is unexpected, since analysis of nonsense mutations in this gene indicates that it is not required for procapsid assembly. Examination of the nucleic acid sequences in the neighborhood of each of the suppressor sites shows significant sequence similarity with the scaffolding gene translational initiation region on the late message. This supports a previously proposed model, in which procapsid assembly is normally initiated in a region on the late messenger RNA that includes the gene 8 start site. By this model, the suppressor mutations may be acting through protein-RNA interactions, changing sequences that identify alternative or competing sites at which the mutant portal subunits may be organized for assembly into the differentiated vertex of the phage capsid.

Purification and organization of the gene 1 portal protein required for phage P22 DNA packaging

The gene 1 protein of Salmonella bacteriophage P22 is located at the DNA packaging vertex of the mature particle. The protein is incorporated into the procapsid shell during shell assembly and is required for DNA packaging. The unassembled precursor form of the gene 1 protein has been purified from cells infected with mutants blocked in procapsid assembly. The purified 90,000-dalton protein was dimeric or monomeric; upon storage in the cold it formed 20S cyclic dodecamers. Computer filtering of negatively stained electron micrographs revealed 12 arms and knobs projecting from a central ring, with a 30-A channel at the center. Similar dodecameric rings were released from disrupted procapsid shells. These results indicate that the gene 1 protein is organized as a cyclic dodecamer within the procapsid shell and serves as the portal through which P22 DNA is threaded during DNA packaging. The presence of a 12-fold ring located at a 5-fold portal vertex appears to be a conserved structural theme of the DNA packaging apparatus of double-stranded DNA phages.