A physicochemical approach for predicting the effectiveness of peptide-based gene delivery systems for use in plasmid-based gene therapy

Peptide-based non-viral gene delivery: A comprehensive review of the advances and challenges

Gene therapy is the most effective treatment option for diseases, but its effectiveness is affected by the choice and design of gene carriers. The genes themselves have to pass through multiple barriers in order to enter the cell and therefore require additional vectors to carry them inside the cell. In gene therapy, peptides have unique properties and potential as gene carriers, which can effectively deliver genes into specific cells or tissues, protect genes from degradation, improve gene transfection efficiency, and enhance gene targeting and biological responsiveness. This paper reviews the research progress of peptides and their derivatives in the field of gene delivery recently, describes the obstacles encountered by foreign materials to enter the interior of the cell, and introduces the following classes of functional peptides that can carry materials into the interior of the cell, and assist in transmembrane translocation of carriers, thus breaking through endosomal traps to enable successful entry of genetic materials into the nucleus of the cell. The paper also discusses the combined application of peptide vectors with other vectors to enhance its transfection ability, explores current challenges encountered by peptide vectors, and looks forward to future developments in the field.

Engineered Polymeric Materials for Biological Applications: Overcoming Challenges of the Bio-Nano Interface

Nanomedicine has generated significant interest as an alternative to conventional cancertherapy due to the ability for nanoparticles to tune cargo release. However, while nanoparticletechnology has promised significant benefit, there are still limited examples of nanoparticles inclinical practice. The low translational success of nanoparticle research is due to the series ofbiological roadblocks that nanoparticles must migrate to be effective, including blood and plasmainteractions, clearance, extravasation, and tumor penetration, through to cellular targeting,internalization, and endosomal escape. It is important to consider these roadblocks holistically inorder to design more effective delivery systems. This perspective will discuss how nanoparticlescan be designed to migrate each of these biological challenges and thus improve nanoparticledelivery systems in the future. In this review, we have limited the literature discussed to studiesinvestigating the impact of polymer nanoparticle structure or composition on therapeutic deliveryand associated advancements. The focus of this review is to highlight the impact of nanoparticlecharacteristics on the interaction with different biological barriers. More specific studies/reviewshave been referenced where possible.

Translational Advances of Hydrofection by Hydrodynamic Injection

Hydrodynamic gene delivery has proven to be a safe and efficient procedure for gene transfer, able to mediate, in murine model, therapeutic levels of proteins encoded by the transfected gene. In different disease models and targeting distinct organs, it has been demonstrated to revert the pathologic symptoms and signs. The therapeutic potential of hydrofection led different groups to work on the clinical translation of the procedure. In order to prevent the hemodynamic side effects derived from the rapid injection of a large volume, the conditions had to be moderated to make them compatible with its use in mid-size animal models such as rat, hamster and rabbit and large animals as dog, pig and primates. Despite the different approaches performed to adapt the conditions of gene delivery, the results obtained in any of these mid-size and large animals have been poorer than those obtained in murine model. Among these different strategies to reduce the volume employed, the most effective one has been to exclude the vasculature of the target organ and inject the solution directly. This procedure has permitted, by catheterization and surgical procedures in large animals, achieving protein expression levels in tissue close to those achieved in gold standard models. These promising results and the possibility of employing these strategies to transfer gene constructs able to edit genes, such as CRISPR, have renewed the clinical interest of this procedure of gene transfer. In order to translate the hydrodynamic gene delivery to human use, it is demanding the standardization of the procedure conditions and the molecular parameters of evaluation in order to be able to compare the results and establish a homogeneous manner of expressing the data obtained, as ‘classic’ drugs.

Identifying Intracellular pDNA Losses From a Model of Nonviral Gene Delivery

Nonviral gene delivery systems are a type of nanocommunication system that transmit plasmid packets (i.e., pDNA packets) that are programmed at the nanoscale to biological systems at the microscopic cellular level. This engineered nanocommunication system suffers large pDNA losses during transmission of the genetically encoded information, preventing its use in biotechnological and medical applications. The pDNA losses largely remain uncharacterized, and the ramifications of reducing pDNA loss from newly designed gene delivery systems remain difficult to predict. Here, the pDNA losses during primary and secondary transmission chains were identified utilizing a MATLAB model employing queuing theory simulating delivery of pEGFPLuc transgene to HeLa cells carried by Lipofectamine 2000 nonviral DNA carrier. Minimizing pDNA loss during endosomal escape of the primary transmission process results in increased number of pDNA in the nucleus with increased transfection, but with increased probability of cell death. The number of pDNA copies in the nucleus and the amount of time the pDNAs are in the nucleus directly correlates to improved transfection efficiency. During secondary transmission, pDNAs are degraded during distribution to daughter cells. Reducing pDNA losses improves transfection, but a balance in quantity of nuclear pDNA, mitosis, and toxicity must be considered in order to achieve therapeutically relevant transfection levels.

Comparative evaluation and optimization of off-the-shelf cationic polymers for gene delivery purposes

Commercially sourced cationic polymers for gene delivery are thoroughly characterized, compared and optimized.

Contrasting effects of cysteine modification on the transfection efficiency of amphipathic peptides

Delivery of DNA to cells remains a key challenge towards development of gene therapy. A better understanding of the properties involved in stability and transfection efficiency of the vector could critically contribute to the improvement of delivery vehicles. In the present work we have chosen two peptides differing only in amphipathicity and explored how presence of cysteine affects DNA uptake and transfection efficiency. We report an unusual observation that addition of cysteine selectively increases transfection efficiency of secondary amphipathic peptide (Mgpe-9) and causes a drop in the primary amphipathic peptide (Mgpe-10). Our results point the effect of cysteine is dictated by the importance of physicochemical properties of the carrier peptide. We also report a DNA delivery agent Mgpe-9 exhibiting high transfection efficiency in multiple cell lines (including hard-to-transfect cell lines) with minimal cytotoxicity which can be further explored for in vivo applications.

Multifunctional self-assembled cationic peptide nanostructures efficiently carry plasmid DNA in vitro and exhibit antimicrobial activity with minimal toxicity

An amphiphilic peptide–aminoglycoside (Pep–Neo) conjugate has been synthesized, self-assembled into nanostructures and evaluated for its multifunctional properties.

Network analysis of endogenous gene expression profiles after polyethyleneimine-mediated DNA delivery

BACKGROUND

DNA delivery systems, which transport exogenous DNA to cells, have applications that include gene therapy, tissue engineering and medical devices. Although the cationic nonviral DNA carrier polyethyleneimine (PEI) has been widely studied, the molecular factors and pathways underlying PEI-mediated DNA transfer remain largely unknown, preventing the design of more efficient delivery systems.

METHODS

HEK 293 T cells were treated with polyplexes formed with PEI and pEGFPLuc encoding for green fluorescent protein (GFP). Transfected cells expressing GFP were flow-separated from treated, untransfected cells. Gene expression profiles were obtained using Affymetrix HG-U133 2.0 microarrays and differentially expressed genes were identified using R/Bioconductor. Gene network analysis using EGAN (exploratory gene association network) bioinformatics tools was then used to find interaction among genes and enriched gene ontology (GO) terms related to transfection. Genes identified by this method were perturbed using pharmacologic activators or inhibitors to assess their effect on DNA transfer.

RESULTS

Microarray analysis comparing transfected cells to untransfected cells revealed 215 genes to be differentially expressed, with the majority enriched to GO processes including metabolism, response to stimulus, cell cycle, biological regulation and cellular component organization or biogenesis pathways. Gene network analysis revealed a coordinated induction of RAP1A, SCG5, PGAP1, ATF3 and NEB genes implicated in cell stress, cell cycle and cytoskeletal processes. Altering pathways with pharmacologic agents confirmed the potential role of RAP1A, SCG5 and ATF3 in transfection.

CONCLUSIONS

Microarray and gene network analyses of the sorted, transfected cell population can identify potential mediators of transfection, providing a basis for the design of improved delivery systems.

The nanostructure of surfactant-DNA complexes with different arrangements

The nanostructure of DNA with different cationic surfactant has been studied in order to elucidate the detailed arrangement concerning the position of DNA and surfactant domains in the complexes. Also, the orientation of the DNA cylinders in the thin films of the complexes was investigated. Attention was directed on the preparation methods of the complexes and to how the different surfactant structure affects the compaction of the DNA. The cationic surfactant-DNA complexes were investigated by X-ray scattering, polarized light microscopy and elemental microanalysis. It was observed that the molecular organization of the complexes between DNA and cationic surfactant corresponds to a hexagonal structure with different packing arrangements. The nanostructure of the complexes depends on the hydrophobic/hydrophilic balance of the cationic surfactant. In particular the use of arginine derived surfactants, with a large polar head group able to interact not only by electrostatics but also by hydrogen bonding, allows for the formation of more compact structures. The results suggest that the smaller the lattice parameter the more compact and stable is the complex implying slower DNA release.

How to screen non-viral gene delivery systems in vitro?

Screening of new gene delivery candidates regarding transfection efficiency and toxicity is usually performed by reading out transgene expression levels relative to a reference formulation after in vitro transfection. However, over the years and among different laboratories, this screening has been performed in a variety of cell lines, using a variety of conditions and read-out systems, and by comparison to a variety of reference formulations. This makes a direct comparison of results difficult, if not impossible. Reaching a consensus would enable placing new results into context of previous findings and estimate the overall contribution to the improvement of non-viral gene delivery. In this paper we illustrate the sensitivity of transfection outcomes on testing conditions chosen, and propose a screening protocol with the aim of standardization within the field.

Classes and prediction of cell-penetrating peptides

The classical view on how peptides enter cells has been changed due to the development in the research field of cell-penetrating peptides (CPPs). During the last 15 years, more than 100 peptide sequences have been published to enter cells and also to bring different biological cargoes with them. Here, we present an overview of CPPs, mainly trying to analyze their common properties yielding the prediction of their cell-penetrating properties. Furthermore, examples of recent research, ideas on classification and uptake mechanisms, as well as a summary of the therapeutic potential of CPPs are presented.

The establishment of an up-scaled micro-mixer method allows the standardized and reproducible preparation of well-defined plasmid/LPEI polyplexes

Polyplexes based on linear polyethylenimine (LPEI) and plasmid DNA are known as efficient non-viral gene delivery systems. However, the requirement for freshly prepared complexes prior to administration due to their instability in aqueous suspension poses the risk of batch-to-batch variations. Therefore, the aim of the study was the establishment of a reproducible and up-scalable method for the preparation of well-defined polyplexes. Polyplexes consisting of pCMVLuc plasmid and 22 kDa linear polyethylenimine (LPEI) were prepared by classical pipetting or with a micro-mixer method using different mixing speeds and plasmid DNA concentrations (20-400 μg/mL). The z-average diameter of the polyplexes was measured by dynamic light scattering. Metabolic activity and transfection efficiency was evaluated on murine neuroblastoma cells after transfection with polyplexes. When varying mixing speeds of the micro-mixer, polyplex size (59-197 nm) and polydispersity index (0.05-0.19) could be directly controlled. The z-average diameter (65-170 nm) and polydispersity index (0.05-0.22) of the polyplexes increased with increasing plasmid DNA concentration (20-400 μg/mL). The established up-scaled micro-mixer method allows the standardized and reproducible preparation of well-defined, transfection-competent plasmid/LPEI polyplexes with high reproducibility.

Lycotoxin-1 insecticidal peptide optimized by amino acid scanning mutagenesis and expressed as a coproduct in an ethanologenic Saccharomyces cerevisiae strain

New methods of safe biological pest control are required as a result of evolution of insect resistance to current biopesticides. Yeast strains being developed for conversion of cellulosic biomass to ethanol are potential host systems for expression of commercially valuable peptides, such as bioinsecticides, to increase the cost-effectiveness of the process. Spider venom is one of many potential sources of novel insect-specific peptide toxins. Libraries of mutants of the small amphipathic peptide lycotoxin-1 from the wolf spider were produced in high throughput using an automated integrated plasmid-based functional proteomic platform and screened for ability to kill fall armyworms, a significant cause of damage to corn (maize) and other crops in the United States. Using amino acid scanning mutagenesis (AASM) we generated a library of mutagenized lycotoxin-1 open reading frames (ORF) in a novel small ubiquitin-like modifier (SUMO) yeast expression system. The SUMO technology enhanced expression and improved generation of active lycotoxins. The mutants were engineered to be expressed at high level inside the yeast and ingested by the insect before being cleaved to the active form (so-called Trojan horse strategy). These yeast strains expressing mutant toxin ORFs were also carrying the xylose isomerase (XI) gene and were capable of aerobic growth on xylose. Yeast cultures expressing the peptide toxins were prepared and fed to armyworm larvae to identify the mutant toxins with greatest lethality. The most lethal mutations appeared to increase the ability of the toxin alpha-helix to interact with insect cell membranes or to increase its pore-forming ability, leading to cell lysis. The toxin peptides have potential as value-added coproducts to increase the cost-effectiveness of fuel ethanol bioproduction.

Engineered Saccharomyces cerevisiae strain for improved xylose utilization with a three-plasmid SUMO yeast expression system

A three-plasmid yeast expression system utilizing the portable small ubiquitin-like modifier (SUMO) vector set combined with the efficient endogenous yeast protease Ulp1 was developed for production of large amounts of soluble functional protein in Saccharomyces cerevisiae. Each vector has a different selectable marker (URA, TRP, or LEU), and the system provides high expression levels of three different proteins simultaneously. This system was integrated into the protocols on a fully automated plasmid-based robotic platform to screen engineered strains of S. cerevisiae for improved growth on xylose. First, a novel PCR assembly strategy was used to clone a xylose isomerase (XI) gene into the URA-selectable SUMO vector and the plasmid was placed into the S. cerevisiae INVSc1 strain to give the strain designated INVSc1-XI. Second, amino acid scanning mutagenesis was used to generate a library of mutagenized genes encoding the bioinsecticidal peptide lycotoxin-1 (Lyt-1) and the library was cloned into the TRP-selectable SUMO vector and placed into INVSc1-XI to give the strain designated INVSc1-XI-Lyt-1. Third, the Yersinia pestis xylulokinase gene was cloned into the LEU-selectable SUMO vector and placed into the INVSc1-XI-Lyt-1 yeast. Yeast strains expressing XI and xylulokinase with or without Lyt-1 showed improved growth on xylose compared to INVSc1-XI yeast.

Method for analysis of nanoparticle hemolytic properties in vitro

Hemolysis (destruction of red blood cells) in vivo can lead to anemia, jaundice, and other pathological conditions; therefore the hemolytic potential of all intravenously administered pharmaceuticals must be evaluated. Nanotechnology-derived devices and drug carriers are emerging as alternatives to conventional small-molecule drugs, and in vitro evaluation of their biocompatibility with blood components is a necessary part of early preclinical development. The small size and unique physicochemical properties of nanoparticles may cause their interactions with erythrocytes to differ from those observed for conventional pharmaceuticals and may also cause interference with standardized in vitro tests. Separating true hemolytic responses from the false-positive or false-negative results caused by particle interference is important for correct interpretation of these tests. Here we describe validation of an in vitro assay for the analysis of nanoparticle hemolytic properties and discuss observed nanointerferences with the assay. We propose alternative methods to avoid misleading results from nanoparticles and discuss the potential relevance of nanoparticle in vitro hemolytic properties to in vivo systems.

Novel Rath peptide for intracellular delivery of protein and nucleic acids

In the present study, a novel cell penetrating peptide (CPP) named as Rath, has been identified from the avian infectious bursal disease virus. It has the potential to penetrate and translocate cargo molecules into cells independent of temperature. Additionally, it can deliver oligonucleotide in 30min and antibodies within an hour intracellular to chicken embryonic fibroblast primary cells. As an ideal delivery vehicle, it has the ability to protect the cargo molecules in the presence of serum, nucleases and has minimal or no cytotoxicity at even higher peptide concentrations studied. The biophysical characterizations showed that Rath has a dominant beta structure with a small alpha helix and has remarkable binding ability with protein and DNA. Thus, the characterization of unique Rath peptide to deliver protein or nucleic acid into the cells with non-covalent interaction could be used as an effective delivery method for various cell based assays.

Preparation and in vitro evaluation of novel lipopeptide transfection agents for efficient gene delivery

Gene therapy by delivery of nonviral expression vectors is highly desirable, due to their safety, stability, and suitability for production as bulk pharmaceuticals. However, low transfection efficiency remains a limiting factor in application on nonviral gene delivery. Despite recent advances in the field, there are still major obstacles to overcome. In an attempt to construct more efficient nonviral gene delivery vectors, we have designed a series of novel lipopeptide transfection agents, consisting of an alkyl chain, one cysteine, 1 to 4 histidine and 1 to 3 lysine residues. The lipopeptides were designed to facilitate dimerization (by way of the cysteine residues), DNA binding at neutral pH (making use of charged lysine residues), and endosomal escape (by way of weakly basic histidine residues). DNA/lipopeptide complexes were evaluated for their biophysical properties and transfection efficiencies. The number and identity of amino acids incorporated in the lipopeptide construct affected their DNA/lipopeptide complex forming capacity. As the number of lysine residues in the lipopeptide increased, the DNA complexes formed became more stable, had higher zeta potential (particle surface charge), and produced smaller mean particle sizes (typically 110 nm at a charge ratio of 5.0 and 240 nm at a charge ratio of 1.0). The effect of inclusion of histidines in the lipopeptide moiety had the opposite effect on complex formation to lysine, but was necessary for high transfection efficiency. In vitro transfection studies in COS-7 cells revealed that the efficiency of gene delivery of the luciferase encoding plasmid, pCMV-Luc, mediated by all the lipopeptides, was much higher than poly(L-lysine) (PLL), which has no endosomal escape system, and in two cases was slightly higher than that of branched polyethylenimine (PEI). Lipopeptides with at least two lysine residues and at least one histidine residue produced spontaneous transfection complexes with plasmid DNA, indicating that endosomal escape was achieved by incorporation of histidine residues. These low molecular weight peptides can be readily synthesized and purified and offer new insights into the mechanism of action of transfection complexes.

Characterization of nanoparticles for therapeutics

Nanotechnology offers many advantages to traditional drug design, delivery and medical diagnostics; however, nanomedicines present considerable challenges for preclinical development. Nanoparticle constructs intended for medical applications consist of a wide variety of materials, and their small size, unique physicochemical properties and biological activity often require modification of standard characterization techniques. A rational characterization strategy for nanomedicines includes physicochemical characterization, sterility and pyrogenicity assessment, biodistribution (absorption, distribution, metabolism and excretion [ADME]) and toxicity characterization, which includes both in vitro tests and in vivo animal studies. Here, we highlight progress for a few methods that are uniquely useful for nanoparticles or are indicative of their toxicity or efficacy.

Development of Improved Nanoparticulate Polyelectrolyte Complex Physicochemistry by Nonstoichiometric Mixing of Polyions with Similar Molecular Weights

Water-based, biodegradable polyelectrolyte complex dispersions (PECs) prepared by mixing oppositely charged polyions are advantageous drug delivery systems due to constituent biocompatibility and nanoparticulate architectures. Reaction phase environmental parameters dictate PEC physicochemical properties, and specifically, complexation between polyelectrolytes having significantly different molecular weights leads to formation of water-insoluble aggregates. Starting with this fact, four-component similar and dissimilar molecular weight PEC chemistries were applied and compared with and without frequency-induced dispergation. The goal was to define nanoparticulate PEC systems with desirable characteristics for use in biological systems. Results show PEC formulations from precursors with similar low molecular weights yielded dispersions with suitable physicochemical characteristics, as verified by photon correlation spectroscopy and TEM, presumably due to efficient ion pairing. Similar low molecular weight PECs fabricated with dispergation exhibited pH-independent stability, as validated by charge and size measurements. These physicochemical advantages lead to an ideal delivery platform.

An insight into the gene delivery mechanism of the arginine peptide system: Role of the peptide/DNA complex size

Cationic peptides have been used successfully to transfer macromolecules into living cells. Previously, we have reported a short arginine peptide-based gene delivery system. However, the mechanisms that allow arginine peptides to promote gene delivery yet remain unknown. In the present study, we investigated the effect of the arginine peptide/DNA complex size on the transfection efficiency. After combining peptides with DNA, a 400 nm complex was observed. As the incubation time was increased, the complex grew larger, reaching 6 microm after 1 h of incubation. Transfection and cellular uptake efficiency were likewise investigated for the effects of the different sizes of complexes. Large complexes were found to be advantageous for transfection. However, better internalization efficiency was found with small complexes, indicating that the amount of peptide/DNA complexes taken up by cells is not the rate-limiting step in the final transfection efficiency. The intracellular path of the peptide/DNA complex was studied using fluorescent labeling and confocal microscopy. In the early stages of transfection, complexes were observed only on the cell surface, and these complexes migrated into cytoplasm however, after 6 h, the presence of complexes in the perinuclear region was noted. We were able to detect colocalization of green and red fluorescence in both the cytoplasm and the nucleus. These results suggest that peptide/DNA complexes reach the nucleus as associated complexes.

The effect of PS content on the ability of natural membranes to fuse with positively charged liposomes and lipoplexes

Supramolecular aggregates containing cationic lipids have been widely used as transfection mediators due to their ability to interact with negatively charged DNA molecules and biological membranes. First steps of the process leading to transfection are partly electrostatic, partly hydrophobic interactions of liposomes/lipoplexes with cell and/or endosomal membrane. Negatively charged compounds of biological membranes, namely glycolipids, glycoproteins and phosphatidylserine (PS), are responsible for such events as adsorption, hemifusion, fusion, poration and destabilization of natural membranes upon contact with cationic liposomes/lipoplexes. The present communication describes the dependence of interaction of cationic liposomes with natural and artificial membranes on the negative charge of the target membrane, charges which in most cases were generated by charging the PS content or its exposure. The model for the target membranes were liposomes of variable content of PS or PG (phosphatidylglycerol) and erythrocyte membranes in which the PS and other anionic compound content/exposure was modified in several ways. Membranes of increased anionic phospholipid content displayed increased fusion with DOTAP (1,2-dioleoyl-3-trimethylammoniumpropane) liposomes, while erythrocyte membranes partly depleted of glycocalix, its sialic acid, in particular, showed a decreased fusion ability. The role of the anionic component is also supported by the fact that erythrocyte membrane inside-out vesicles fused easily with cationic liposomes. The data obtained on erythrocyte ghosts of normal and disrupted asymmetry, in particular, those obtained in the presence of Ca(2+), indicate the role of lipid flip-flop movement catalyzed by scramblase. The ATP-depletion of erythrocytes also induced an increased sensitivity to hemoglobin leakage upon interactions with DOTAP liposomes. Calcein leakage from anionic liposomes incubated with DOTAP liposomes was also dependent on surface charge of the target membranes. In all experiments with the asymmetric membranes the fusion level markedly increased with an increase of temperature, which supports the role of membrane lipid mobility. The decrease in positive charge by binding of plasmid DNA and the increase in ionic strength decreased the ability of DOTAP liposomes/lipoplexes to fuse with erythrocyte ghosts. Lower pH promotes fusion between erythrocyte ghosts and DOTAP liposomes and lipoplexes. The obtained results indicate that electrostatic interactions together with increased mobility of membrane lipids and susceptibility to form structures of negative curvature play a major role in the fusion of DOTAP liposomes with natural and artificial membranes.

Novel molecular approaches to cystic fibrosis gene therapy

Gene therapy holds promise for the treatment of a range of inherited diseases, such as cystic fibrosis. However, efficient delivery and expression of the therapeutic transgene at levels sufficient to result in phenotypic correction of cystic fibrosis pulmonary disease has proved elusive. There are many reasons for this lack of progress, both macroscopically in terms of airway defence mechanisms and at the molecular level with regard to effective cDNA delivery. This review of approaches to cystic fibrosis gene therapy covers these areas in detail and highlights recent progress in the field. For gene therapy to be effective in patients with cystic fibrosis, the cDNA encoding the cystic fibrosis transmembrane conductance regulator protein must be delivered effectively to the nucleus of the epithelial cells lining the bronchial tree within the lungs. Expression of the transgene must be maintained at adequate levels for the lifetime of the patient, either by repeat dosage of the vector or by targeting airway stem cells. Clinical trials of gene therapy for cystic fibrosis have demonstrated proof of principle, but gene expression has been limited to 30 days at best. Results suggest that viral vectors such as adenovirus and adeno-associated virus are unsuited to repeat dosing, as the immune response reduces the effectiveness of each subsequent dose. Nonviral approaches, such as cationic liposomes, appear more suited to repeat dosing, but have been less effective. Current work regarding non-viral gene delivery is now focused on understanding the mechanisms involved in cell entry, endosomal escape and nuclear import of the transgene. There is now increasing evidence to suggest that additional ligands that facilitate endosomal escape or contain a nuclear localization signal may enhance liposome-mediated gene delivery. Much progress in this area has been informed by advances in our understanding of the mechanisms by which viruses deliver their genomes to the nuclei of host cells.

Modulation of the molecular conformation of a hepatocyte-targeting gene drug in order to improve its expression efficiency in vitro

AIM

To construct different conformations of a plasmid DNA/vector complex (pcDNA3.1/IFN-gamma-ASOR-PLL) and transfect cells of the hepatoma cell line BEL7402 to investigate the optimal conformation of the complex for improved expression efficiency in the target cell.

METHODS

Double-distilled water and adjuvant were added to the naked pcDNA3.1/IFN-gamma, target vector ASOR-PLL and the ASOR-PLL-pcDNA3.1/IFN-gamma complex to create different conformations; molecules that were transfected into BEL7402 cells and the expression efficiency was determined by measuring the IFN-g concentration in the culture supernatant by ELISA.

RESULTS

Naked pcDNA3.1/IFN-gamma DNA distributed linearly in double-distilled water and condensed into a mica configuration in adjuvant; ASOR-PLL had a net-like distribution without adjuvant and a spider-like form in the adjuvant-treated group; the ASOR-PLL-pcDNA3.1/IFN-g complex had a divaricate form without adjuvant, but a bead-like or granular conformation in 0.1 and 0.2 mol/L of adjuvant, a homogeneous bacilliform or chromatoid-shaped conformation in 0.3 mol/L adjuvant, and varied shapes in 0.4 and 0.5 mol/L adjuvant. The supernatant IFN-gamma expression in the bacilliform/chromatoid conformation complex group was the highest among the different conformation groups and controls. When chloroquine was added the supernatant IFN-gamma concentration increased in the liposome group and decreased in the bacilliform/chromatoid conformation group .

CONCLUSIONS

The two structural molecules and their complex, ASOR-PLL-pcDNA3.1/IFN-gamma, were adjustable in the liquid mode. The specific bacilliform/chromatoid conformation of complex was lysosome enzyme-resistant and could play an active role in improving the efficiency of gene expression. The hypothesis that a chromosome-like conformation of the target gene molecule is involved in enhancing exogenous gene expression is proposed.

Hydrogel pullulan nanoparticles encapsulating pBUDLacZ plasmid as an efficient gene delivery carrier

This study provides a method for enhancing the delivery of nucleic acid molecules to cells by encapsulating it inside the hydrogel pullulan nanoparticles. In this study, pullulan nanoparticles encapsulating pBUDLacZ plasmid has been prepared inside the aqueous droplets of w/o microemulsions. Transmission electron microscopy (TEM) image showed that the particles are spherical in shape with size of 45+/-0.80 nm diameter. Cell cytotoxicity studies as determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTT) assay demonstrated that cells incubated with nanoparticles remained more than 100% viable at nanoparticle concentration as high as 1000 microg/ml. From scanning electron microscope images, it was observed that the nanoparticles were internalised and the cells exhibited vacuoles in the cell body due to nanoparticle internalisation. Endocytosis of nanoparticles resulted in disruption of F-actin and beta-tubulin cytoskeleton of human fibroblasts. The efficacy of transfection in vitro on HEK293 and COS-7 cells demonstrated cell type dependence, with COS cells having a higher gene expression. The beta-gal expression in COS-7 cells by pullulan nanoparticle was comparable to commercially available Lipofectamine 2000. The results of this study are encouraging for the development of pullulan nanoparticles as an intracellular delivery system for drugs and genes.

Structural Analysis of Chitosan Mediated DNA Condensation by AFM: Influence of Chitosan Molecular Parameters

Chitosan is a nontoxic and biodegradable polysaccharide that has recently emerged as a promising candidate for gene delivery. Here the ability of various chitosans, differing in the fractional content of acetylated units (F(A)) and the degree of polymerization (DP), to compact DNA was studied. Polyplexes made from mixing plasmid DNA with chitosan yielded a blend of toroids and rods, as observed by AFM. The ratios between the fractions of toroids and rods were observed to decrease with increasing F(A) of the chitosan, indicating that the charge density of chitosan, proportional to (1 - F(A)), is important in determining the shape of the compacted DNA. The amount of chitosan required to fully compact DNA into well-defined toroidal and rodlike structures were found to be strongly dependent on the chitosan molecular weight, and thus its total charge. A higher charge ratio (+/-) was needed for the shorter chitosans, showing that an increased concentration of the low DP chitosan could compensate for the reduced interaction strength of the individual ligands with DNA. Employing chitosans with different molecular parameters offers the possibility of designing DNA-chitosan polyplexes with various geometries, reflecting various chitosan-DNA interaction strengths, which is necessary for the evaluation of efficient gene delivery vehicles.

Affinity purification of plasmid DNA by temperature-triggered precipitation

This report describes a new plasmid DNA purification method, which takes advantage of the DNA-binding affinity and specificity of the bacterial metalloregulatory protein MerR, and of the temperature responsiveness of elastin-like proteins (ELPs). Upon increasing the temperature, ELP undergoes a reversible phase transition from water-soluble forms into aggregates, and this property was exploited for the precipitation of plasmid DNA containing the MerR recognition sequence by a simple temperature trigger. In one purification step, plasmid DNA was purified from E. coli cell lysates to a better purity than that prepared by a standard alkaline purification method, with no contaminating chromosomal DNA and cellular proteins. This protein-based approach, in combination with the reversible phase transition feature of ELP, makes the outlined method a promising candidate for large-scale purification of plasmid DNA for sensitive applications such as nonviral gene therapy or DNA vaccines.

Structure of transfection-active histone H1/DNA complexes

Relationships between the structure of transfecting complexes of histone H1 and DNA and their transfection efficiency were studied. Transfection activity proved to be connected to complex aggregates. Low speed centrifugation of the complexes resulted in loss of the transfection activity. The complexes/aggregates were active with high efficiency in a broad range of weight input ratios r(i) (0.1 < r(i) < 30). Using atomic force microscopy (AFM), the complexes were imaged at negative, nearly electroneutral and positive charge conditions. Electroneutral complexes at r(i) = 1 showed a multitude of different complex forms. Fibrillar, network-like and branched structures were frequently present in one complex. Strongly positive charged complexes had a toroidal appearance. All these different forms contributed to the high transfection efficiency. Cellular uptake is supposed to be by phagocytosis.

Nanoparticulate DNA packaging using terpolymers of poly(lysine-g-(lactide-b-ethylene glycol))

Terpolymers of poly(lysine-g-(lactide-b-ethylene glycol)) (pK-pLL-pEG) were synthesized by using ring-opening polymerization and functional end-group grafting. Synthesis was characterized with gel permeation chromatography, proton nuclear magnetic resonance spectroscopy, and a trinitrobenzene sulfonic acid binding assay. Polymer association behavior with DNA was investigated using an ethidium bromide exclusion assay, static light scattering, and scanning electron microscopy. Polylactide molecular weight was varied to investigate its impact on DNA association and resulting complex characteristics. Polylysine ( = 8800, DP = 42) modified with either 7400 or 10 870 pLL-pEG reduced the minimum amount of primary amines necessary for complete condensation by 23% and 48%, respectively, compared to unmodified polylysine (pK42). Complexes formed with the highest molecular weight terpolymer demonstrated significantly (p < 0.1) greater resistance to DNase I than lyophilized pK42-DNA particles. This study suggests that modification of pK42 with pLL-pEG diblock copolymers impacts polylysine's associative and binding behavior to DNA and resulting particle characteristics. Modulation of terpolymer composition in complexes can enable control over intracellular plasmid dissociation rates to improve transfection efficiency.

Barriers to nonviral gene delivery

The use of various synthetic lipids and polymers to deliver DNA for gene therapy applications has been the subject of intense examination for the last 15 years. Our understanding of the processes involved in the delivery of DNA, although still limited, can be described in terms of specific physical and chemical barriers encountered along the delivery pathway. Successful engagement of this pathway involves avoiding inactivation in the extracellular compartment and initial favorable interactions with the cell surface. Internalization of the delivery system by endocytosis results in a poorly defined endosomal trafficking process which, if not escaped, leads to degradation of the therapeutic DNA in lysosomes. For the small fraction of material that is able to escape this vesicular trafficking pathway, the cytosol provides additional physical and metabolic barriers to further trafficking to the nucleus. Finally, nuclear uptake has been demonstrated to be a significant barrier to gene delivery. In this review, we outline in greater detail the various processes involved in each step and describe various formulation variables that have been explored to overcome these delivery barriers to nonviral gene delivery.

The transfection of Jurkat T-leukemic cells by use of pH sensitive immunoliposomes

A gene transfer vector has been developed utilising anionic liposomes as a carrier of plasmid DNA (pEGlacZ, 7.6 kb) to transfect CD3+ T lymphocytes (Jurkat cells). The plasmid DNA that contained the Escherichia coli beta-galactosidase reporter gene was condensed using poly-l-lysine of molecular mass 20,700 (PLK99) to form a polyplex which was interacted with several anionic liposome formulations to form lipopolyplexes. The liposome formulations where based on dioleoylphosphatidylethanolamine (DOPE) in combination with cholesterol and dioleoylphosphatidylcholine (DOPC) and oleic acid, or dimyristoylphosphatidylethanolamine (DMPE). For targeting to the Jurkat cells distearoylphosphatidylethanolamine (DSPE) linked to poly (ethylene glycol) molecular mass 2,000 and coupled to anti-CD3 antibody was incorporated. The polyplexes and lipopolyplexes were characterised in terms of size, zeta potential, agarose gel electrophoresis and electron microscopy and the permeability of the lipopolyplexes to liposome-encapsulated glucose was determined. The polyplexes consisted of a mixed population of rod-like structures (53-160 nm long and 23-31 nm diameter) and spheres (18-30 nm diameter). The lipopolyplexes retained a permeability barrier although were more permeable to glucose than their component liposomes. The poly-l-lysine condensing agent was still susceptible to pronase digestion suggesting that the polyplex was associated with the outer surface of the liposome. The lipopolyplexes with lipid composition DOPE/cholesterol/OA/DSPE-PEG2000 anti-CD3+ PLK99-plasmid DNA had significant gene transfer activity, as monitored by beta-galactosidase expression, that depended on the charge ratio of the component polyplex and the lipid/DNA weight ratio. The anti-CD3 antibody, the liposomal lipid and pH sensitivity were essential for transfection activity.

Surface-tethered DNA complexes for enhanced gene delivery

Overcoming the barriers to efficient gene transfer is a fundamental goal of biotechnology. A versatile approach to enhance the delivery of nonviral DNA involves complexation with cationic polymers, which can be designed to overcome the barriers to effective gene transfer. More recently, DNA release from a polymer substrate or scaffold has been shown to enhance gene transfer, likely by increasing DNA concentrations in the cell microenvironment. We propose a novel approach that combines these two strategies in which cationic polymer/DNA complexes are tethered to a substrate that supports cell adhesion. The cationic polymers package the DNA for efficient internalization and the surface tethering functions to maintain elevated concentrations in the cell microenvironment for cells adhered to the substrate. The cationic polymer polylysine (degree of polymerization equal to 19 or 150) was modified with biotin groups, which was confirmed by mass spectrometry and biochemical analysis. Complex formation of DNA with biotinylated-polylysine, or mixtures of biotinylated and nonbiotinylated polylysines, was confirmed by gel electrophoresis. Plasmid DNA encoding for the reporter gene beta-galactosidase was complexed with different mixtures of biotinylated and nonbiotinylated polylysine and incubated on neutravidin (nonglycosylated avidin)-coated surfaces. DNA surface densities ranging from 0.1 to 4.3 microg/cm2 were observed and found to be a function of the number of biotin groups, the molecular weight of the polylysine, and the amount of DNA. HEK293T or NIH/3T3 cells were then seeded onto the DNA-modified surfaces, and transfection was quantified at 48 and 96 h. Transfection by the DNA surfaces was observed with both cell lines, and expression levels up to 100 fold greater than bulk delivery of the complexes was obtained. Transfection was found to be a function of the surface DNA quantities and the number of tethers on the complex. Transfected cells were observed only in the region in which DNA complexes were tethered, suggesting that the location of transfected cells can be specifically controlled. Surface tethering of DNA represents a promising approach to enhancing gene transfer and spatially controlling gene delivery, which may have applications to a multitude of fields ranging from tissue engineering to functional genomics.

Exploitation of intracellular pH gradients in the cellular delivery of macromolecules

Most cellular components such as the cytoplasm, endosomes, lysosomes, endoplasmic reticulum, Golgi bodies, mitochondria, and nuclei are known to maintain their own characteristic pH values. These pH values range from as low as 4.5 in the lysosome to about 8.0 in the mitochondria. Given these proton gradients around a neutral pH, weak acids, and bases with a pKa between 5.0 and 8.0 can exhibit dramatic changes in physicochemical properties. These compounds can be conjugated as such to macromolecules or incorporated into polymeric or liposomal formulations to promote the efficient cellular delivery of macromolecules. Mechanistically, the carrier molecules can facilitate favorable membrane partition, membrane fusion, transient pore formation, or membrane disruption. Drug carriers equipped with such pH-sensitive triggers and switches are able to significantly enhance the cellular delivery of macromolecules in vitro. However, the successful application of these molecules for efficient delivery in vivo requires the design of noncytotoxic, nonimmunogenic, serum compatible and biochemically labile carriers, systematic analysis of their mechanisms of action, and extensive animal studies.