Structural elucidation of the EPS of slime producing Brevundimonas vesicularis sp. isolated from a paper machine

Dextran and levan exopolysaccharides from tempeh-associated lactic acid bacteria with bioactivity against enterotoxigenic Escherichia coli (ETEC)

Soybean tempeh contains bioactive carbohydrate that can reduce the severity of diarrhea by inhibiting enterotoxigenic Escherichia coli (ETEC) adhesion to mammalian epithelial cells. Lactic acid bacteria (LAB) are known to be present abundantly in soybean tempeh. Some LAB species can produce exopolysaccharides (EPS) with anti-adhesion bioactivity against ETEC but there has been no report of anti-adhesion bioactive EPS from tempeh-associated LAB. We isolated EPS-producing LAB from tempeh-related sources, identified them, unambiguously elucidated their EPS structure and assessed the bioactivity of their EPS against ETEC. Pediococcus pentosaceus TL, Leuconostoc mesenteroides WA and L. mesenteroides WN produced both dextran (α-1,6 linked glucan; >1000 kDa) and levan (β-2,6 linked fructan; 650-760 kDa) in varying amounts and Leuconostoc citreum TR produced gel-forming α-1,6-mixed linkage dextran (829 kDa). All four isolates produced EPS that could adhere to ETEC cells and inhibit auto-aggregation of ETEC. EPS-PpTL, EPS-LmWA and EPS-LmWN were more bioactive towards pig-associated ETEC K88 while EPS-LcTR was more bioactive against human-associated ETEC H10407. Our finding is the first to report on the bioactivity of dextran against ETEC. Tempeh is a promising source of LAB isolates that can produce bioactive EPS against ETEC adhesion and aggregation.

Size-dependent influences of nanoplastics on microbial consortium differentially inhibiting 2, 4-dichlorophenol biodegradation

Nanoplastics (NPs), as a type of newly emerging pollutant, are ubiquitous in various environmental systems, one of which is coexistence with organic pollutants in wastewater, potentially influencing the pollutants' biodegradation. A knowledge gap exists regarding the influence of microbial consortium and NPs interactions on biodegradation efficiency. In this work, a 2,4-dichlorophenol (DCP) biodegradation experiment with presence of polystyrene nanoplastics (PS-NPs) with particle sizes of 100 nm (PS100) or 20 nm (PS20) was conducted to verify that PS-NPs had noticeable inhibitory effect on DCP biodegradation in a size-dependent manner. PS100 at 10 mg/L and 100 mg/L both prolonged the microbial stagnation compared to the control without PS-NPs; PS20 exacerbated greater, with PS20 at 100 mg/L causing a noticeable 6-day lag before the start-up of rapid DCP reduction. The ROS level increased to 1.4-fold and 1.8-fold under PS100 and PS20 exposure, respectively, while the elevated LDH under PS20 exposure indicated the mechanical damage to cell membrane by smaller NPs. PS-NPs exposure also resulted in a decrease in microbial diversity and altered the niches of microbial species, e.g., they decreased the abundance of some functional bacteria such as Brevundimonas and Comamonas, while facilitated some minor members to obtain more proliferation. A microbial network with higher complexity and less competition was induced to mediate PS-NPs stress. Functional metabolism responded differentially to PS100 and PS20 exposure. Specifically, PS100 downregulated amino acid metabolism, while PS20 stimulated certain pathways in response to more severe oxidative stress. Our findings give insights into PS-NPs environmental effects concerning microflora and biological degradation.

Exopolysaccharide Production from Marine-Derived Brevundimonas huaxiensis Obtained from Estremadura Spur Pockmarks Sediments Revealing Potential for Circular Economy

Marine environments represent an enormous biodiversity reservoir due to their numerous different habitats, being abundant in microorganisms capable of producing biomolecules, namely exopolysaccharides (EPS), with unique physical characteristics and applications in a broad range of industrial sectors. From a total of 67 marine-derived bacteria obtained from marine sediments collected at depths of 200 to 350 m from the Estremadura Spur pockmarks field, off the coast of Continental Portugal, the Brevundimonas huaxiensis strain SPUR-41 was selected to be cultivated in a bioreactor with saline culture media and glucose as a carbon source. The bacterium exhibited the capacity to produce 1.83 g/L of EPS under saline conditions. SPUR-41 EPS was a heteropolysaccharide composed of mannose (62.55% mol), glucose (9.19% mol), rhamnose (19.41% mol), glucuronic acid (4.43% mol), galactose (2.53% mol), and galacturonic acid (1.89% mol). Moreover, SPUR-41 EPS also revealed acyl groups in its composition, namely acetyl, succinyl, and pyruvyl. This study revealed the importance of research on marine environments for the discovery of bacteria that produce new value-added biopolymers for pharmaceutical and other biotechnological applications, enabling us to potentially address saline effluent pollution via a sustainable circular economy.

Responses of straw foam-based aerobic granular sludge to atrazine: Insights from metagenomics and microbial community variations

Atrazine (ATZ) has caused serious environmental pollution, but the biodegradation of ATZ is relatively slow and inefficient. Herein, a straw foam-based aerobic granular sludge (SF-AGS) was developed, the spatially ordered architectures of which could greatly improve the drug tolerance and biodegradation efficiency of ATZ. The results showed that, in the presence of ATZ, chemical oxygen demand (COD), ammonium nitrogen (NH₄⁺-N), total phosphorus (TP), and total nitrogen (TN) were effectively removed within 6 h, and the removal efficiencies were as high as 93.37%, 85.33%, 84.7%, and 70%, respectively. Furthermore, ATZ stimulated microbial consortia to secrete three times more extracellular polymers compared to without ATZ. Illumina MiSeq sequencing results showed that bacterial diversity and richness decreased, leading to significant changes in microbial population structure and composition. ATZ-resistant bacteria including Proteobacteria, Actinobacteria, and Burkholderia laid the biological basis for the stability of aerobic particles, efficient removal of pollutants, and degradation of ATZ. The study demonstrated that SF-AGS is feasible for ATZ-laden low-strength wastewater treatment.

Bioremediation of coastal aquaculture effluents spiked with florfenicol using microalgae-based granular sludge - a promising solution for recirculating aquaculture systems

Aquaculture is a crucial industry in the agri-food sector, but it is linked to serious environmental problems. There is a need for efficient treatment systems that allow water recirculation to mitigate pollution and water scarcity. This work aimed to evaluate the self-granulation process of a microalgae-based consortium and its capacity to bioremediate coastal aquaculture streams that sporadically contain the antibiotic florfenicol (FF). A photo-sequencing batch reactor was inoculated with an autochthonous phototrophic microbial consortium and was fed with wastewater mimicking coastal aquaculture streams. A rapid granulation process occurred within ca. 21 days, accompanied by a substantially increase of extracellular polymeric substances in the biomass. The developed microalgae-based granules exhibited high and stable organic carbon removal (83-100%). Sporadically wastewater contained FF which was partially removed (ca. 5.5-11.4%) from the effluent. In periods of FF load, the ammonium removal slightly decreased (from 100 to ca. 70%), recovering 2 days after FF feeding ceased. A high-chemical quality effluent was obtained, complying with ammonium, nitrite, and nitrate concentrations for water recirculation within a coastal aquaculture farm, even during FF feeding periods. Members belonging to the Chloroidium genus were predominant in the reactor inoculum (ca. 99%) but were replaced from day-22 onwards by an unidentified microalga from the phylum Chlorophyta (>61%). A bacterial community proliferated in the granules after reactor inoculation, whose composition varied in response to feeding conditions. Bacteria from the Muricauda and Filomicrobium genera, Rhizobiaceae, Balneolaceae, and Parvularculaceae families, thrived upon FF feeding. This study demonstrates the robustness of microalgae-based granular systems for aquaculture effluent bioremediation, even during periods of FF loading, highlighting their potential as a feasible and compact solution in recirculation aquaculture systems.

Brevundimonas vesicularis Peritonitis in a Chronic Peritoneal Dialysis Patient

Gram-negative peritonitis in chronic peritoneal dialysis patients is difficult to treat and may result in catheter loss. Brevundimonas vesicularis is a Gram-negative rod bacterium which rarely causes infections in humans. A 41-year-old male receiving continuous cycling peritoneal dialysis for 5 months developed culture-negative peritonitis. He failed initial empiric treatment with intraperitoneal vancomycin and levofloxacin and thereafter intravenous gentamicin. B. vesicularis resistant to levofloxacin was isolated from the peritoneal fluid 21 days after his initial symptoms. Despite treatment with intravenous ceftriaxone and oral amoxicillin-clavulanate, the infection persisted, which required removal of the peritoneal catheter in order to cure this infection. We describe the features of B. vesicularis infection in our patient and the rarely reported additional cases.

Bioprospecting for Exopolysaccharides from Deep-Sea Hydrothermal Vent Bacteria: Relationship between Bacterial Diversity and Chemical Diversity

Many bacteria biosynthesize structurally diverse exopolysaccharides (EPS) and excrete them into their surrounding environment. The EPS functional features have found many applications in industries such as cosmetics and pharmaceutics. In particular, some EPS produced by marine bacteria are composed of uronic acids, neutral sugars, and N-acetylhexosamines, and may also bear some functional sulfate groups. This suggests that they can share common structural features with glycosaminoglycans (GAG) like the two EPS (HE800 and GY785) originating from the deep sea. In an attempt to discover new EPS that may be promising candidates as GAG-mimetics, fifty-one marine bacterial strains originating from deep-sea hydrothermal vents were screened. The analysis of the EPS chemical structure in relation to bacterial species showed that Vibrio, Alteromonas, and Pseudoalteromonas strains were the main producers. Moreover, they produced EPS with distinct structural features, which might be useful for targeting marine bacteria that could possibly produce structurally GAG-mimetic EPS.

Biostabilization of cohesive sediments: revisiting the role of abiotic conditions, physiology and diversity of microbes, polymeric secretion, and biofilm architecture

In aquatic habitats, micro-organisms successfully adhere to and mediate particles, thus changing the erosive response of fine sediments to hydrodynamic forcing by secreting glue-like extracellular polymeric substances (EPS). Because sediment dynamics is vital for many ecological and economic aspects of watersheds and coastal regions, biostabilization of cohesive sediments is one of the important ecosystem services provided by biofilms. Although the research on biostabilization has gained momentum over the last 20 years, we still have limited insights principally due to the complex nature of this topic, the varying spatial, temporal, and community scales examined, oversimplified ecohydraulic experiments with little natural relevance, and the often partial views of the disciplines involved. This review highlights the current state of our knowledge on biostabilization and identifies important areas for future research on: (A) the influence of abiotic conditions on initial colonization and subsequent biofilm growth, focusing on hydrodynamics, substratum, salinity, nutrition, and light climate; (B) the response of microbes in terms of physiological activity and species diversity to environmental settings as well as biotic conditions such as competition and grazing; and (C) the effects of the former on the EPS matrix, its main constituents, their composition, functional groups/substitutes, and structures/linkages. The review focuses specifically on how the numerous mutual feedback mechanisms between abiotic and biotic conditions influence microbial stabilization capacity, and thus cohesive sediment dynamics.

Distribution of airborne bacteria in railway stations in Tokyo, Japan

OBJECTIVES

We performed the current study to (1) understand the distribution of culturable airborne bacteria over a one-year monitoring period, (2) confirm places in stations where airborne bacteria are highly detected, (3) understand the factors that affect concentrations of airborne bacteria and (4) compare the distributions of airborne bacteria and fungi in railway stations in Japan.

METHODS

Measurements of airborne bacteria were taken at stations A and B located in Tokyo. Station A had under- and above-ground concourses and platforms, whereas station B had spaces only above-ground. Airborne bacteria at each measurement position were collected with an air sampler on plate count agar media. After cultivation of the sampled media, the number of bacteria colonies was counted on each media.

RESULTS

(1) Airborne bacteria were highly detected in the above-ground concourse in station A. Almost all the indoor-to-outdoor (I/O) ratios of concentrations of airborne bacteria in the above-ground concourse in station A were higher than one throughout the year and were especially high in summer. (2) The factor that affects the concentrations of airborne bacteria seems to be the number of railway customers, not humidity. (3) The characteristics of the distributions of airborne bacteria and fungi were different, even though they were sampled in the same stations on the same days.

CONCLUSIONS

In the case of controlling indoor air quality of stations in the future, the locations in railway stations that would require control of indoor air quality differ between airborne bacteria or fungi, respectively.

Characterisation of the arabinose-rich carbohydrate composition of immature and mature marama beans (Tylosema esculentum)

Marama bean (Tylosema esculentum) is an important component of the diet around the Kalahari Desert in Southern Africa where this drought resistant plant can grow. The marama bean contains roughly 1/3 proteins, 1/3 lipids and 1/3 carbohydrates, but despite its potential as dietary supplement little is known about the carbohydrate fraction. In this study the carbohydrate fraction of "immature" and "mature" marama seeds are characterised. The study shows that the marama bean contains negligible amounts of starch and soluble sugars, both far less than 1%. The cell wall is characterised by a high arabinose content and a high resistance to extraction as even a 6M NaOH extraction was insufficient to extract considerable amounts of the arabinose. The arabinose fraction was characterised by arabinan-like linkages and recognised by the arabinan antibody LM6 and LM13 indicating that it is pectic arabinan. Two pools of pectin could be detected; a regular CDTA (1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid) or enzymatically extractable pectin fraction and a recalcitrant pectin fraction containing the majority of the arabinans, of which about 40% was unextractable using 6M NaOH. Additionally, a high content of mannose was observed, possibly from mannosylated storage proteins.

Structure and immunological characterization of the capsular polysaccharide of a pyrogenic liver abscess caused by Klebsiella pneumoniae: activation of macrophages through Toll-like receptor 4

The active components of a primary pyrogenic liver abscess (PLA) Klebsiella pneumoniae in stimulating cytokine expression in macrophages are still unclear. The capsular polysaccharide (CPS) of PLA K. pneumoniae is important in determining clinical manifestations, and we have shown that it consists of repeating units of the trisaccharide (→3)-β-D-Glc-(1→4)-[2,3-(S)-pyruvate]-β-D-GlcA-(1→4)-α-L-Fuc-(1→) and has the unusual feature of extensive pyruvation of glucuronic acid and acetylation of C(2)-OH or C(3)-OH of fucose. We demonstrated that PLA K. pneumoniae CPS induces secretion of tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) by macrophages through Toll-like receptor 4 (TLR4) and that this effect was lost when pyruvation and O-acetylation were chemically destroyed. Furthermore, expression of TNF-α and IL-6 in PLA K. pneumoniae CPS-stimulated macrophages was shown to be regulated by the TLR4/ROS/PKC-δ/NF-κB, TLR4/PI3-kinase/AKT/NF-κB, and TLR4/MAPK signaling pathways.

New insights into membrane fouling in a submerged anaerobic membrane bioreactor based on characterization of cake sludge and bulk sludge

A laboratory-scale submerged anaerobic membrane bioreactor (SAnMBR) treating thermomechanical pulping whitewater was operated for over 7 months to investigate and compare the characteristics of cake sludge and bulk sludge during stable state operation period. Serial analysis showed that cake sludge had a smaller particle size distribution (PSD), much higher specific filtration resistance (1.34×10(14) m/kg), 1.5 times higher bound EPS and significantly different microbial community as compared with bulk sludge. Further analysis indicated that small flocs, bound EPS and inorganic materials play important role in cake formation process. The formed cake layer was found to have a heterogeneous structure. The results obtained in this study indicated that cake formation process started from attachment of small flocs and/or specific bacterial clusters which colonize the surface of the membrane and provide enhanced conditions that allow for cake formation to progress.

Characterization of extracellular polymeric substances from acidophilic microbial biofilms

We examined the chemical composition of extracellular polymeric substances (EPS) extracted from two natural microbial pellicle biofilms growing on acid mine drainage (AMD) solutions. The EPS obtained from a mid-developmental-stage biofilm (DS1) and a mature biofilm (DS2) were qualitatively and quantitatively compared. More than twice as much EPS was derived from DS2 as from DS1 (approximately 340 and 150 mg of EPS per g [dry weight] for DS2 and DS1, respectively). Composition analyses indicated the presence of carbohydrates, metals, proteins, and minor quantities of DNA and lipids, although the relative concentrations of these components were different for the two EPS samples. EPS from DS2 contained higher concentrations of metals and carbohydrates than EPS from DS1. Fe was the most abundant metal in both samples, accounting for about 73% of the total metal content, followed by Al, Mg, and Zn. The relative concentration profile for these metals resembled that for the AMD solution in which the biofilms grew, except for Si, Mn, and Co. Glycosyl composition analysis indicated that both EPS samples were composed primarily of galactose, glucose, heptose, rhamnose, and mannose, while the relative amounts of individual sugars were substantially different in DS1 and DS2. Additionally, carbohydrate linkage analysis revealed multiply linked heptose, galactose, glucose, mannose, and rhamnose, with some of the glucose in a 4-linked form. These results indicate that the biochemical composition of the EPS from these acidic biofilms is dependent on maturity and is controlled by the microbial communities, as well as the local geochemical environment.

Occurrence and composition of extracellular lipids and polysaccharides in a full-scale membrane bioreactor

The aim of this study was to characterize the polysaccharides and lipid fractions of membrane foulants in a full-scale membrane bioreactor (MBR) treating municipal wastewater. Both of these polymeric compounds are major components of bacterial lipopolysaccharides and are impacting membrane fouling; however most of the data so far have been collected by determining sum parameters rather than the detailed composition of these polymers. Photometric analysis of sugars showed that uronic acids (glucuronic, mannuronic and galacturonic acid) as common units of bacterial polysaccharides accounted for 8% (w/w) of extracellular polymeric substances (EPS) in activated sludge flocs. Further the so-called polysaccharide peak of EPS, with a molecular weight >10 kDa according to size exclusion chromatography, was proven to contain bacterial sugar units as shown by high resolution LC-MS. Interestingly, only traces of uronic acids could be detected in EPS of the membrane fouling layer. A far more dramatic enrichment in the fouling layer was revealed for the lipid fraction of EPS, which was determined as fatty acid methyl esters by GC-MS. The weight percentage of fatty acids in EPS extracted from fouled ultrafiltration membranes was much higher (10%) than in the activated sludge itself (1-3%). The fatty acids accumulated on the membrane fouling layer were obviously not only of microbial origin (C16:0, C18:0) but also derived from the raw wastewater itself (C9:0). Hydrophobic interaction of lipids with the PVDF (polyvinylidene fluoride) membrane material therefore seems a plausible explanation for the observed fouling phenomenon. The results suggest that fatty acids from bacterial lipopolysaccharides as well as from synthetic sources are of much higher relevance to membrane fouling than previously assumed.

Characterisation of cell wall polysaccharides from okra (Abelmoschus esculentus (L.) Moench)

Okra pods are commonly used in Asia as a vegetable, food ingredient, as well as a traditional medicine for many different purposes; for example, as diuretic agent, for treatment of dental diseases and to reduce/prevent gastric irritations. The healthy properties are suggested to originate from the high polysaccharide content of okra pods, resulting in a highly viscous solution with a slimy appearance when okra is extracted with water. In this study, we present a structural characterisation of all major cell wall polysaccharides originating from okra pods. The sequential extraction of okra cell wall material yielded fractions of soluble solids extractable using hot buffer (HBSS), chelating agent (CHSS), dilute alkaline (DASS) and concentrated alkaline (CASS). The HBSS fraction was shown to be rich in galactose, rhamnose and galacturonic acid in the ratio 1.3:1:1.3. The degree of acetylation is relatively high (DA=58) while the degree of methyl esterification is relatively low (DM=24). The CHSS fraction contained much higher levels of methyl esterified galacturonic acid residues (63% galacturonic acid; DM=48) in addition to minor amounts of rhamnose and galactose. The ratio of galactose to rhamnose to galacturonic acid was 1.3:1.0:1.3 and 4.5:1.0:1.2 for HBSS and CHSS, respectively. These results indicated that the HBSS and CHSS fractions contain rhamnogalacturonan type I next to homogalacturonan, while the latter is more prevailing in CHSS. Also the DASS fraction is characterised by high amounts of rhamnose, galactose, galacturonic acid and some arabinose, indicating that rhamnogalacturonan I elements with longer arabinose- and galactose-rich side chains were part of this fraction. Partial digestion of HBSS and CHSS by pectin methyl esterase and polygalacturonase resulted in a fraction with a lower Mw and lower viscosity in solution. These samples were subjected to NMR analysis, which indicated that, in contrast to known RG I structure, the acetyl groups in HBSS are not located on the galacturonic acid residues, while for CHSS only part of the acetyl groups are located on the RG I galacturonic acid residues. The CASS fraction consisted of XXXG-type xyloglucan and 4-methylglucuronoxylan as shown by their sugar (linkage) composition and enzymatic digestion.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: an update covering the period 2001-2002

This review is the second update of the original review on the application of MALDI mass spectrometry to the analysis of carbohydrates and glycoconjugates that was published in 1999. It covers fundamental aspects of the technique as applied to carbohydrates, fragmentation of carbohydrates, studies of specific carbohydrate types such as those from plant cell walls and those attached to proteins and lipids, studies of glycosyl-transferases and glycosidases, and studies where MALDI has been used to monitor products of chemical synthesis. Use of the technique shows a steady annual increase at the expense of older techniques such as FAB. There is an increasing emphasis on its use for examination of biological systems rather than on studies of fundamental aspects and method development and this is reflected by much of the work on applications appearing in tabular form.

High-throughput screening of monoclonal antibodies against plant cell wall glycans by hierarchical clustering of their carbohydrate microarray binding profiles

Antibody-producing hybridoma cell lines were created following immunisation with a crude extract of cell wall polymers from the plant Arabidopsis thaliana. In order to rapidly screen the specificities of individual monoclonal antibodies (mAbs), their binding to microarrays containing 50 cell wall glycans immobilized on nitrocellulose was assessed. Hierarchical clustering of microarray binding profiles from newly produced mAbs, together with the profiles for mAbs with previously defined specificities allowed the rapid assignments of mAb binding to antigen classes. mAb specificities were further investigated using subsequent immunochemical and biochemical analyses and two novel mAbs are described in detail. mAb LM13 binds to an arabinanase-sensitive pectic epitope and mAb LM14, binds to an epitope occurring on arabinogalactan-proteins. Both mAbs display novel patterns of recognition of cell walls in plant materials.

Identifying pioneer bacterial species responsible for biofouling membrane bioreactors

More effective control of membrane biofouling in membrane bioreactors (MBRs) lies in the fundamental understanding of the pioneer microorganisms responsible for surface colonization that leads to biofilm formation. In this study, the composition of the planktonic and sessile microbial communities inhabiting four laboratory-scale MBR systems were compared using amplified ribosomal DNA restriction analysis (ARDRA) and 16S ribosomal DNA gene sequencing. The ARDRA results suggest that the microbial communities on membrane surfaces could be very different from the ones in the suspended biomass. Phylogenetic analysis based on the 16S rRNA gene sequences provided a list of bacteria that might be the pioneers of surface colonization on microfiltration membranes. The results further suggested that research on the mechanisms of cell attachment in such an engineering environment could be critical for future development of appropriate biofouling control strategies.

Colanic acid is an exopolysaccharide common to many enterobacteria isolated from paper-machine slimes

In this study, polysaccharide-producing bacteria were isolated from slimes collected from two Finnish and one Spanish paper mill and the exopolysaccharides (EPSs) produced by 18 isolates were characterised. Most of the isolates, selected on the bases of slimy colony morphology, were members of the family Enterobacteriaceae most frequently belonging to the genera Enterobacter and Klebsiella including Raoultella. All of the EPSs analysed showed the presence of charged groups in the form of uronic acid or pyruvate revealing the polyanionic nature of these polysaccharides. Further results of the carbohydrate analysis showed that the EPS produced by nine of the enterobacteria was colanic acid.

Sugar composition and FT-IR analysis of exopolysaccharides produced by microbial isolates from paper mill slime deposits

Thirty exopolysaccharides (EPS) produced by bacteria isolated from biofilms or slimelayers from different paper and board mills in Finland, France and Spain were subjected to size exclusion chromatography and sugar compositional analysis. High performance size exclusion chromatography (HPSEC) analysis revealed that some samples were composed of several molecular weight populations. These samples were fractionated by size exclusion chromatography and pooled accordingly. Principal components analysis (PCA) of the sugar compositions of the different pools indicated the presence of glucans and mannans caused by insufficient removal of the carbon or nitrogen source (yeast extract) from the bacteria growth medium leading to an overestimation of the glucose and mannose level in the sample, respectively. From the point of view of slime problems the EPS populations are the most important for multivariate analysis. Four groups of EPSs have been recognized by PCA analysis: a group of EPSs produced by Enterobacter and related genera similar to the regularly reported colanic acid; a group of Methylobacterium EPSs having high galactose and pyruvate levels and two groups that showed less dense clusters produced by Bacillus and related genera, showing high mannose and/or glucose levels and Klebsiella EPSs that showed galactose with rhamnose as major characteristic sugar moieties. Fourier transform infrared spectroscopy (FT-IR) of the same samples followed by discriminant partial least squares regression (DPLS) and linear discriminant analysis (LDA) showed that, when used with a well-defined training set, FT-IR could be used clustering instead of time-consuming sugar composition analysis. The Enterobacter and Methylobacetrium EPS groups could be recognized clearly. However the fact that this could hardly be done for the other two groups in the dataset indicates the importance of a larger and well-defined training or calibration set. The potential to use FT-IR, as a tool for pattern recognition and clustering with respect to EPS structures produced by micro organisms isolated from a paper mill environment is discussed.

Polysaccharide-producing bacteria isolated from paper machine slime deposits

Development of novel enzymatic methods for slime deposit control in paper mills requires knowledge of polysaccharide-producing organisms and the polysaccharide structures present in deposits. In this work, 27 polysaccharide-producing bacteria were isolated from slime samples collected from different parts of a paper machine. Most of the isolates produced polysaccharides in liquid culture and nine of them were selected for production of polysaccharides for characterisation. The selected isolates belonged to seven different genera: Bacillus, Brevundimonas, Cytophaga, Enterobacter, Klebsiella, Paenibacillus and Starkeya. Using ribotyping, partial 16S rDNA sequencing, physiological tests and fatty acid analysis, four of the nine isolates: Bacillus cereus, Brevundimonas vesicularis, K. pneumoniae and P. stellifer were identified to the species level. Production of polysaccharides by the selected isolates varied between 0.07 and 1.20 g L(-1), the highest amount being produced by B. vesicularis. The polysaccharides were heteropolysaccharides with varying proportions of galactose, glucose mannose, rhamnose fucose and uronic acids.

Methylobacterium sp. isolated from a Finnish paper machine produces highly pyruvated galactan exopolysaccharide

The slime-forming bacterium Methylobacterium sp. was isolated from a Finnish paper machine and its exopolysaccharide (EPS) was produced on laboratory scale. Sugar compositional analysis revealed a 100% galactan (EPS). However, FT-IR showed a very strong peak at 1611 cm(-1) showing the presence of pyruvate. Analysis of the pyruvate content revealed that, based on the sugar composition, the EPS consists of a trisaccharide repeating unit consisting of D-galactopyranose and [4,6-O-(1-carboxyethylidene)]-D-galactopyranose with a molar ratio of 1:2, respectively. Both linkage analysis and 2D homo- and heteronuclear 1H and 13C NMR spectroscopy revealed the following repeating unit: -->3)-[4,6-O-(1-carboxyethylidene)]-alpha-D-Galp-(1-->3)[4,6-O-(1-carboxyethylidene)]-alpha-D-Galp-(1-->3)-alpha-D-Galp-(1-->. By enrichment cultures from various ground and compost heap samples a polysaccharide-degrading culture was obtained that produced an endo acting enzyme able to degrade the EPS described. The enzyme hydrolysed the EPS to a large extent, releasing oligomers that mainly consisted out of two repeating units.