Protein immobilization on the surface of poly-L-lactic acid films for improvement of cellular interactions

Effects of bone surface topography and chemistry on macrophage polarization

Surface structure plays a crucial role in determining cell behavior on biomaterials, influencing cell adhesion, proliferation, differentiation, as well as immune cells and macrophage polarization. While grooves and ridges stimulate M2 polarization and pits and bumps promote M1 polarization, these structures do not accurately mimic the real bone surface. Consequently, the impact of mimicking bone surface topography on macrophage polarization remains unknown. Understanding the synergistic sequential roles of M1 and M2 macrophages in osteoimmunomodulation is crucial for effective bone tissue engineering. Thus, exploring the impact of bone surface microstructure mimicking biomaterials on macrophage polarization is critical. In this study, we aimed to sequentially activate M1 and M2 macrophages using Poly-L-Lactic acid (PLA) membranes with bone surface topographical features mimicked through the soft lithography technique. To mimic the bone surface topography, a bovine femur was used as a model surface, and the membranes were further modified with collagen type-I and hydroxyapatite to mimic the bone surface microenvironment. To determine the effect of these biomaterials on macrophage polarization, we conducted experimental analysis that contained estimating cytokine release profiles and characterizing cell morphology. Our results demonstrated the potential of the hydroxyapatite-deposited bone surface-mimicked PLA membranes to trigger sequential and synergistic M1 and M2 macrophage polarizations, suggesting their ability to achieve osteoimmunomodulatory macrophage polarization for bone tissue engineering applications. Although further experimental studies are required to completely investigate the osteoimmunomodulatory effects of these biomaterials, our results provide valuable insights into the potential advantages of biomaterials that mimic the complex microenvironment of bone surfaces.

Collagen/polyester-polyurethane porous scaffolds for use in meniscal repair

Focusing on the regeneration of damaged knee meniscus, we propose a hybrid scaffold made of poly(ester-urethane) (PEU) and collagen that combines suitable mechanical properties with enhanced biological integration. To ensure biocompatibility and degradability, the degradable PEU was prepared from a poly(ε-caprolactone), L-lysine diisocyanate prepolymer (PCL di-NCO) and poly(lactic-co-glycolic acid) diol (PLGA). The resulting PEU (Mn = 52 000 g mol-1) was used to prepare porous scaffolds using the solvent casting (SC)/particle leaching (PL) method at an optimized salt/PEU weight ratio of 5 : 1. The morphology, pore size and porosity of the scaffolds were evaluated by SEM showing interconnected pores with a uniform size of around 170 μm. Mechanical properties were found to be close to those of the human meniscus (Ey ∼ 0.6 MPa at 37 °C). To enhance the biological properties, incorporation of collagen type 1 (Col) was then performed via soaking, injection or forced infiltration. The latter yielded the best results as shown by SEM-EDX and X-ray tomography analyses that confirmed the morphology and highlighted the efficient pore Col-coating with an average of 0.3 wt% Col in the scaffolds. Finally, in vitro L929 cell assays confirmed higher cell proliferation and an improved cellular affinity towards the proposed scaffolds compared to culture plates and a gold standard commercial meniscal implant.

Immobilization of Gelatin on Fibers for Tissue Engineering Applications: A Comparative Study of Three Aliphatic Polyesters

Immobilization of cell adhesive proteins on the scaffold surface has become a widely reported method that can improve the interaction between scaffold and cells. In this study, three nanofibrous scaffolds obtained by electrospinning of poly(caprolactone) (PCL), poly(L-lactide-co-caprolactone) (PLCL) 70:30, or poly(L-lactide) (PLLA) were subjected to chemical immobilization of gelatin based on aminolysis and glutaraldehyde cross-linking, as well as physisorption of gelatin. Two sets of aminolysis conditions were applied to evaluate the impact of amine group content. Based on the results of the colorimetric bicinchoninic acid (BCA) assay, it was shown that the concentration of gelatin on the surface is higher for the chemical modification and increases with the concentration of free NH2 groups. XPS (X-ray photoelectron spectroscopy) analysis confirmed this outcome. On the basis of XPS results, the thickness of the gelatin layer was estimated to be less than 10 nm. Initially, hydrophobic scaffolds are completely wettable after coating with gelatin, and the time of waterdrop absorption was correlated with the surface concentration of gelatin. In the case of all physically and mildly chemically modified samples, the decrease in stress and strain at break was relatively low, contrary to strongly aminolyzed PLCL and PLLA samples. Incubation testing performed on the PCL samples showed that a chemically immobilized gelatin layer is more stable than a physisorbed one; however, even after 90 days, more than 60% of the initial gelatin concentration was still present on the surface of physically modified samples. Mouse fibroblast L929 cell culture on modified samples indicates a positive effect of both physical and chemical modification on cell morphology. In the case of PCL and PLCL, the best morphology, characterized by stretched filopodia, was observed after stronger chemical modification, while for PLLA, there was no significant difference between modified samples. Results of metabolic activity indicate the better effect of chemical immobilization than of physisorption of gelatin.

Biocompatibility improvement and controlled in vitro degradation of poly (lactic acid)-b-poly(lactide-co-caprolactone) by formation of highly oriented structure for orthopedic application

Poly (lactic acid) (PLA) has been proposed as a promising orthopedic implant material, whereas insufficient mechanical strength, unsatisfied biocompatibility and inappropriate degradation rate restrict its further application. In this work, self-reinforced poly (lactic acid)-b-poly(lactide-co-caprolactone) (PLA-b-PLCL) block copolymer with long-chain branches was fabricated through two-stage orientation. Compared with smooth and hydrophobic PLA surface, the surface of PLA-b-PLCL presented micro-phase separated structure with improved hydrophilicity, and cells seeded on it showed improved adhesion/proliferation and high alkaline phosphatase (ALP) activity. After the 1st stage orientation at temperature higher than T_g1 (glass transition temperature of PLA phase), the amount of CH₃ and CO groups on surface of PLA-b-PLCL increased, while "groove-ridge" structure formed, resulting in enhancement of surface hydrophobicity. After the 2nd stage orientation at T_g1  ~ T_g2 (glass transition temperature of PLCL phase), surface hydrophobicity/amount of CO groups further increased and "groove-ridge" structure became more significant. Due to suitable wettability and enhanced material-cell mechanical interlocking, cell proliferation/ALP activity were improved and a continuous cell layer formed on sample surface. During in vitro degradation in phosphate buffered saline solution, by introduction of PLCL segments, the crystallinity decreased and solution absorption increased, resulting in a rapid deterioration of mechanical properties. After the 1st stage orientation, a dense microfibrillar structure with high crystallinity formed, which hindered diffusion of solution and delay hydrolytic degradation. After the 2nd stage orientation, PLCL segments were arranged more closely, resulting in a further inhibition of degradation, which was helpful for controlling the strength decay rate of PLA as bone fixation materials.

Optimization of ultraviolet/ozone (UVO3) process conditions for the preparation of gelatin coated polystyrene (PS) microcarriers

The aim of this study was to develop gelatin coated polystyrene (PS) microcarriers with good cell adhesion and proliferation properties. PS microspheres, prepared using oil-in water (o/w) solvent evaporation method, were loaded with oxygen containing functional groups using an ultraviolet/ozone (UVO₃) system. Using water-soluble carbodiimide chemistry, gelatin was subsequently immobilized on UVO₃ treated PS microspheres. The amount of immobilized gelatin was found to be directly proportional to the surface carboxyl (COOH) concentration on PS microspheres. Face Centered Central Composite Design (FCCD) was employed to optimize the process conditions of UVO₃ treatment to maximize the surface COOH concentration on PS microspheres for allowing higher gelatin immobilization. Statistical results revealed that, the optimized process conditions were ozone flow rate of ∼64,603 ppm, exposure time of ∼60 minutes and sample amount of 5.05 g. Under these conditions, the surface COOH concentration on PS microspheres was ∼1,505 nmol/g with the corresponding amount of immobilized gelatin was ∼2,725 µg/g. Characterization analyses strongly suggest that the optimized UVO₃ treatment and successive gelatin immobilization have successfully improved surface wettability and dispersion stability of PS microspheres. Moreover, gelatin coated PS microcarriers were also proven as able to support the growth of CHO-K1 cells in high cell density culture.

Enhanced Mechanical Stability and Biodegradability of Ti-Infiltrated Polylactide

Biodegradable polymers have been often used in place of conventional nondegradable polymers for industrial and medical applications. In particular, polylactide (PLA) has been regarded as a popular ecofriendly plastic and has many advantages like good biocompatibility and processability. Yet, it still has some drawbacks in mechanical properties. Here, we prepared Ti-infiltrated PLA by mimicking the gelatinous jaw of a seaworm whose mechanical properties are toggled up and down by the tiny amount of metal ions, expecting to prepare a new type of alternative. Ti induced significant chemical and microstructural changes in the PLA, which led to a notable improvement in the mechanical properties as compared to the neat PLA. The Ti-infiltrated PLA exhibited high resistance to rapid degradation. More importantly, the toxicity assessment demonstrated that the resulting PLA is still biocompatible and nontoxic. Consequently, we proved that the Ti-infiltrated PLA has high mechanical properties comparable to conventional nondegradable polymers and good biocompatibility as well as delayed biodegradability. We anticipate the current Ti-infiltrated PLA to be an ecofriendly replacement of some conventional plastics, which helps preserve a green environment.

Improved exposure of bioactive peptides to the outermost surface of the polylactic acid nanofiber scaffold

We recently reported a novel method to modify the polylactic acid (PLLA) nanofiber scaffold with IKVAV peptide/oligo (d-lactic acid) (ODLA) heteroconjugates. However, a part of the IKVAV sequence was not exposed to the outermost surface and therefore, cell adhesion was not optimized. In this study, we evaluated two strategies to improve the exposing efficiency of IKVAV. One strategy introduced a hydrophilic diethylene glycol (diEG) segment between IKVAV and ODLA. In the second method, these modified nanofibers were heated to a given temperature and cooled to room temperature in water. The IKVAV peptides at the outermost surface were quantified by the fluorescein isothiocyanate staining method. After being heated above the PLLA glass transition temperature, the exposing efficiency of the IKVAV sequence on the PLLA/ODLA-diEG-IKVAV nanofiber was three times higher than that on the PLLA/ODLA-IKVAV unheated nanofiber. Moreover, nearly 100% of the PC-12 cells seeded onto the PLLA/ODLA-diEG-IKVAV nanofiber and were well distributed, while only 50% of the PC-12 cells seeded onto the PLLA and PLLA/ODLA-IKVAV nanofibers. These strategies markedly enhanced the exposing efficiency of the bioactive peptides; therefore, their use can be applicable to other nanofiber scaffolds.

Anti-biofouling and functionalizable bioinspired chitosan-based hydrogel coating via surface photo-immobilization

Zwitterionic polymer is a new generation of anti-fouling materials with its good resistance to protein and bacterial adhesion. Constructing the anti-fouling surfaces with zwitterionic polymer has been regarded as an effective approach for improving the biocompatibility and biofunctionality of clinic devices. Herein, we reported a facile approach to construct a biodegradable anti-biofouling and functionalizable hydrogel coating via photo-immobilization using commercial polyethylene terephthalate (PET) films as the substrate, based on zwitterionic glycidyl methacrylate-phosphorylcholine-chitosan (PCCs-GMA). The surface structure and physicochemical properties of zwitterionic PCCs-GMA hydrogel coating were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and static water contact angle measurement, and its functionalizable sites were detected by fluorescence labeling. Compared with the pristine PET and cationic chitosan - GMA and hydroxypropyltrimethyl ammonium chloride chitosan (HTCC) - GMA hydrogel coatings, zwitterionic PCCs-GMA hydrogel coating exhibited excellent biocompatibility, and significantly reduced protein adsorption for three model proteins of fibrinogen, immunoglobulin and lysozyme, repelled platelet adhesion, as well as showed a high resistance to bacterial attachment of Escherichia coli and Staphylococcus aureus and superior anti-fouling properties to MRC-5 cells. The results indicated that photo-immobilized zwitterionic PCCs-GMA hydrogel coating has perspective as a dual functional platform with integrated antifouling and further biofunctional properties for various biomedical applications.

Synthesis of a novel biomedical poly(ester urethane) based on aliphatic uniform-size diisocyanate and the blood compatibility of PEG-grafted surfaces

The purpose of this study is to offer a novel kind of polyurethane with improved surface blood compatibility for long-term implant biomaterials. In this work, the aliphatic poly(ester-urethane) (PEU) with uniform-size hard segments was prepared and the PEU surface was grafted with hydrophilic poly(ethylene glycol) (PEG). The PEU was obtained by chain-extension of poly(ɛ-caprolactone) (PCL) with isocyanate-terminated urethane triblock. Free amino groups were introduced onto the surface of PEU film via aminolysis with hexamethylenediamine, and then the NH₂-grafted PEU surfaces (PEU-NH₂) were reacted with isocyanate-terminated monomethoxyl PEG (MPEG-NCO) to obtain the PEG-grafted PEU surfaces (PEU-PEG). Analysis by nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and gel permeation chromatography were performed to confirm the chemical structures of the chain extender, PCL, PEU, and PEU-PEG. Additionally, the influence of aminolysis on the physical-mechanical properties of PEU films was investigated. Two glass transition temperatures and a broad endothermic peak were observed in the differential scanning calorimetry curves of PEU, which demonstrated a microphase-separated and semicrystalline structure, respectively. The PEU-PEG film exhibited excellent mechanical properties with an ultimate stress of ∼39 MPa and an elongation at break of ∼1190%, which was slightly lower than that of PEU, indicating that the aminolysis has little influence on the tensile properties. Evaluation of the blood compatibility of the films by bovine serum albumin adsorption and the platelet adhesion test revealed that the PEG-grafted surface had improved resistance to protein adsorption and excellent resistance to platelet adhesion. In vitro degradation tests showed that the PEU-PEG film could maintain its mechanical properties for more than six months and only lost ∼25% weight after 18 months. Due to the excellent mechanical properties, good blood compatibility and slow degradability, this novel kind of polyurethane hold significant promise for long-term implant biomaterials, especially soft tissue augmentation and regeneration.

Optimization of ultraviolet ozone treatment process for improvement of polycaprolactone (PCL) microcarrier performance

Growing cells on microcarriers may have overcome the limitation of conventional cell culture system. However, the surface functionality of certain polymeric microcarriers for effective cell attachment and growth remains a challenge. Polycaprolactone (PCL), a biodegradable polymer has received considerable attention due to its good mechanical properties and degradation rate. The drawback is the non-polar hydrocarbon moiety which makes it not readily suitable for cell attachment. This report concerns the modification of PCL microcarrier surface (introduction of functional oxygen groups) using ultraviolet irradiation and ozone (UV/O₃) system and investigation of the effects of ozone concentration, the amount of PCL and exposure time; where the optimum conditions were found to be at 60,110.52 ppm, 5.5 g PCL and 60 min, respectively. The optimum concentration of carboxyl group (COOH) absorbed on the surface was 1495.92 nmol/g and the amount of gelatin immobilized was 320 ± 0.9 µg/g on UV/O₃ treated microcarriers as compared to the untreated (26.83 ± 3 µg/g) microcarriers. The absorption of functional oxygen groups on the surface and the immobilized gelatin was confirmed with the attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR) and the enhancement of hydrophilicity of the surface was confirmed using water contact angle measurement which decreased (86.93°-49.34°) after UV/O₃ treatment and subsequently after immobilization of gelatin. The attachment and growth kinetics for HaCaT skin keratinocyte cells showed that adhesion occurred much more rapidly for oxidized surfaces and gelatin immobilized surface as compared to untreated PCL.

Activity and stability analysis of covalent conjugated lysozyme-single walled carbon nanotubes: potential biomedical and industrial applications

Analysis of covalent conjugated lysozyme-single walled carbon nanotubes.

Lactoferrin-Immobilized Surfaces onto Functionalized PLA Assisted by the Gamma-Rays and Nitrogen Plasma to Create Materials with Multifunctional Properties

Both cold nitrogen radiofrequency plasma and gamma irradiation have been applied to activate and functionalize the polylactic acid (PLA) surface and the subsequent lactoferrin immobilization. Modified films were comparatively characterized with respect to the procedure of activation and also with unmodified sample by water contact angle measurements, mass loss, X-ray photoelectron spectroscopy (XPS), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), atomic force microscopy (AFM), and chemiluminescence measurements. All modified samples exhibit enhanced surface properties mainly those concerning biocompatibility, antimicrobial, and antioxidant properties, and furthermore, they are biodegradable and environmentally friendly. Lactoferrin deposited layer by covalent coupling using carbodiimide chemistry showed a good stability. It was found that the lactoferrin-modified PLA materials present significantly increased oxidative stability. Gamma-irradiated samples and lactoferrin-functionalized samples show higher antioxidant, antimicrobial, and cell proliferation activity than plasma-activated and lactoferrin-functionalized ones. The multifunctional materials thus obtained could find application as biomaterials or as bioactive packaging films.

Developments and recent advancements in the field of endogenous amino acid selective bond forming reactions for bioconjugation

Bioconjugation methodologies have proven to play a central enabling role in the recent development of biotherapeutics and chemical biology approaches. Recent endeavours in these fields shed light on unprecedented chemical challenges to attain bioselectivity, biocompatibility, and biostability required by modern applications. In this review the current developments in various techniques of selective bond forming reactions of proteins and peptides were highlighted. The utility of each endogenous amino acid-selective conjugation methodology in the fields of biology and protein science has been surveyed with emphasis on the most relevant among reported transformations; selectivity and practical use have been discussed.

Fabrication of porous chitosan-polyvinyl pyrrolidone scaffolds from a quaternary system via phase separation

Three-dimensional porous chitosan-polyvinyl pyrrolidone (PVP) scaffolds were fabricated for tissue engineering applications via liquid-liquid or liquid-solid phase separation. A mixture of an acidic aqueous solution with butanol as a non-solvent and a chitosan-PVP quaternary system were freeze-dried. We then studied the homogenous open pore structure and the minute pore distribution in order to improve the mass transfer and cell seeding efficiency while also obtaining the optimal ratio of PVP to provide high interconnectivity and to improve the open-pore structure. The properties of the porous chitosan-PVP scaffolds - including the microstructure, chemical release, water absorption properties, and cell proliferation tests were studied - and the results were compared against those obtained from conventional scaffolds. chitosan-PVP scaffolds with a porosity of over 70% were obtained, and the pore morphology on the surface and within the porous scaffolds showed the presence of homogenous open pores with excellent interconnectivity. As the PVP content increased, main pores (50-100 μm) and minute pores (4-10 μm) could be clearly observed. Also, the porous scaffold showed an improved efficiency for cell adhesion after the cells were cultured for 4 h. After 72 h, the cultured cells presented an increase in the cell proliferation and on the porous scaffolds. These results strongly suggest that the porous chitosan-PVP scaffolds can be widely used in tissue engineering, including for biopatches and artificial skin applications.

Effect of cellulose nanowhiskers on surface morphology, mechanical properties, and cell adhesion of melt-drawn polylactic Acid fibers

Polylactic acid (PLA) fibers were produced with an average diameter of 11.2 (± 0.9) μm via a melt-drawing process. The surface of the PLA fibers was coated with blends of cellulose nanowhiskers (CNWs) (65 to 95 wt %) and polyvinyl acetate (PVAc). The CNWs bound to the smooth PLA fiber surface imparted roughness, with the degree of roughness depending on the coating blend used. The fiber tensile modulus increased 45% to 7 GPa after coating with 75 wt % CNWs compared with the uncoated PLA fibers, and a significant increase in the fiber moisture absorption properties at different humidity levels was also determined. Cytocompatibility studies using NIH-3T3 mouse fibroblast cells cultured onto CNWs-coated PLA surface revealed improved cell adhesion compared with the PLA control, making this CNW surface treatment applicable for biomedical and tissue engineering applications. Initial studies also showed complete cell coverage within 2 days.

Thermoresponsive elastin/laminin mimicking artificial protein for modifying PLLA scaffolds in nerve regeneration

Poly(l-lactic acid) (PLLA) is widely used as a scaffold but does not possess biological functions.

Solid-support immobilization of a "swing" fusion protein for enhanced glucose oxidase catalytic activity

The strategic surface immobilization of a protein can add new functionality to a solid substrate; however, protein activity, e.g., enzymatic activity, can be drastically decreased on immobilization onto a solid surface. The concept of a designed and optimized "molecular interface" is herein introduced in order to address this problem. In this study, molecular interface was designed and constructed with the aim of attaining high enzymatic activity of a solid-surface-immobilized a using the hydrophobin HFBI protein in conjunction with a fusion protein of HFBI attached to glucose oxidase (GOx). The ability of HFBI to form a self-organized membrane on a solid surface in addition to its adhesion properties makes it an ideal candidate for immobilization. The developed fusion protein was also able to form an organized membrane, and its structure and immobilized state on a solid surface were investigated using QCM-D measurements. This method of immobilization showed retention of high enzymatic activity and the ability to control the density of the immobilized enzyme. In this study, we demonstrated the importance of the design and construction of molecular interface for numerous purposes. This method of protein immobilization could be utilized for preparation of high throughput products requiring structurally ordered molecular interfaces, in addition to many other applications.

Long-range ordering of block copolymer cylinders driven by combining thermal annealing and substrate functionalization

This work presents a new method for forming well-defined nanostructured thin films from self-assembled polystyrene-block-poly(l-lactide) (PS-PLLA) on Si wafers with a functionalized SiO2 surface. Large, well-ordered, perpendicular PLLA cylinders in PS-PLLA thin films can be formed using the functionalized substrate. In contrast to random copolymers, a neutral substrate for the PS and PLLA blocks is formed by functionalizing a substrate with hydroxyl-terminated PS (PS-OH) followed by hydroxyl-terminated PLLA (PLLA-OH). The heterogeneous grafting of PS-OH and PLLA-OH can be substantially alleviated using this two-step functionalization. Accordingly, the surface properties can be fine-tuned by controlling the ratio of grafted PS-OH to PLLA-OH to control the orientation of the PLLA cylinders on the functionalized SiO2. Nevertheless, the orientation that is driven by the neutral substrate is surprisingly limited in that the effective length of orienting cylinders is less than twice the interdomain spacing. Thermal annealing at high temperature can yield a neutral air surface, rendering perpendicular PLLA cylinders that stand sub-micrometers from the air surface. Consequently, the neutral substrate can be used to enable truly film-spanning perpendicular cylinders in films to be fabricated using the high-temperature thermal treatment. In addition, the perpendicular cylinders can be laterally ordered by further increasing the annealing temperature. The ability to create these film-spanning perpendicular cylinders in films with a well-ordered texture and sub-micrometer thickness opens up possible applications in nanotechnology.

Efficient immobilization and patterning of biomolecules on poly(ethylene terephthalate) films functionalized by ion irradiation for biosensor applications

The surface of a poly(ethylene terephthalate) (PET) film was selectively irradiated with proton beams at various fluences to generate carboxylic acid groups on the surface; the resulting functionalized PET surface was then characterized in terms of its wettability, chemical structure, and chemical composition. The results revealed that (i) carboxylic acid groups were successfully generated in the irradiated regions of the PET surface, and (ii) their relative amounts were dependent on the fluence. A capture biomolecule, anthrax toxin probe DNA, was selectively immobilized on the irradiated regions on the PET surface. Cy3-labeled DNA as a target biomolecule was then hybridized with the probe DNA immobilized on the PET surface. Liver-cancer-specific α-fetoprotein (AFP) antigen, as a target biomolecule, was also selectively immobilized on the irradiated regions on the PET surface. Texas Red-labeled secondary antibody was then reacted with an AFP-specific primary antibody prebound to the AFP antigen on the PET surface for the detection of the target antigen, using an indirect immunoassay method. The results revealed that (i) well-defined micropatterns of biomolecules were successfully formed on the functionalized PET surfaces and (ii) the fluorescence intensity of the micropatterns was dependent mainly on the concentrations of the target DNA hybridized to the probe DNA and the target AFP antigen immobilized on the PET films. The lowest detectable concentrations of the target DNA and target AFP antigen in this study were determined to be 4 and 16 ng/mL, respectively, with the PET film prepared at a fluence of 5 × 10(14) ions/cm(2).

Degradable polyester scaffolds with controlled surface chemistry combining minimal protein adsorption with specific bioactivation

Advanced biomaterials and scaffolds for tissue engineering place high demands on materials and exceed the passive biocompatibility requirements previously considered acceptable for biomedical implants. Together with degradability, the activation of specific cell–material interactions and a three-dimensional environment that mimics the extracellular matrix are core challenges and prerequisites for the organization of living cells to functional tissue. Moreover, although bioactive signalling combined with minimization of non-specific protein adsorption is an advanced modification technique for flat surfaces, it is usually not accomplished for three-dimensional fibrous scaffolds used in tissue engineering. Here, we present a one-step preparation of fully synthetic, bioactive and degradable extracellular matrix-mimetic scaffolds by electrospinning, using poly(D,L-lactide-co-glycolide) as the matrix polymer. Addition of a functional, amphiphilic macromolecule based on star-shaped poly(ethylene oxide) transforms current biomedically used degradable polyesters into hydrophilic fibres, which causes the suppression of non-specific protein adsorption on the fibres’ surface. The subsequent covalent attachment of cell-adhesion-mediating peptides to the hydrophilic fibres promotes specific bioactivation and enables adhesion of cells through exclusive recognition of the immobilized binding motifs. This approach permits synthetic materials to directly control cell behaviour, for example, resembling the binding of cells to fibronectin immobilized on collagen fibres in the extracellular matrix of connective tissue.

Immobilization of type-I collagen and basic fibroblast growth factor (bFGF) onto poly (HEMA-co-MMA) hydrogel surface and its cytotoxicity study

Type-I collagen and bFGF were immobilized onto the surface of poly (HEMA-co-MMA) hydrogel by grafting and coating methods to improve its cytotoxicity. The multi-layered structure of the biocompatible layer was confirmed by FTIR, AFM and static water contact angles. The layers were stable in body-like environment (pH 7.4). Human skin fibroblast cells (HSFC) were seeded onto Col/bFGF-poly (HEMA-co-MMA), Col-poly (HEMA-co-MMA) and poly (HEMA-co-MMA) films for 1, 3 and 5 day. MTT assay was performed to evaluate the extraction toxicity of the materials. Results showed that the cell attachment, proliferation and differentiation on Col/bFGF-poly (HEMA-co-MMA) film were higher than those of the control group, which indicated the improvement of cell-material interaction. The extraction toxicity of the modified materials was also lower than that of the unmodified group. The protein and bFGF immobilized poly (HEMA-co-MMA) hydrogel might hold great promise to be a biocompatible material.

Stable modification of poly(lactic acid) surface with neurite outgrowth-promoting peptides via hydrophobic collagen-like sequence

Surface modification of poly(dl-lactic acid) (PLA) scaffolds has been performed using a biofunctional small peptide composed of collagen-like repetitive sequence and laminin-derived sequence (AG73-G(3)-(PPG)(5)) via hydrophobic interaction. The results of surface analysis suggest that AG73-G(3)-(PPG)(5) can be stably adsorbed onto PLA films via hydrophobic interaction at the (PPG)(5) region, and form an extracellular matrix-like layer composed of both structural and biosignalling sequences. In addition, neurite outgrowth of PC12 cells was observed on the AG73-G(3)-(PPG)(5)-adsorbed PLA film. These results indicate that AG73-G(3)-(PPG)(5) very effectively enhances neurite outgrowth activity on PLA films. The hydrophobic adsorption of collagen-like peptide bound to biosignalling molecules may be widely applied as a surface modifier of PLA films for tissue engineering.

Regulation of endothelial cells migration on poly(D, L-lactic acid) films immobilized with collagen gradients

To investigate the effect of protein surface-density gradient on the motility of endothelial cells, we developed a novel approach for the fabrication of a collagen density gradient onto poly(d, l-lactic acid) (PDLLA) films in this study. The approach involves a sequential alkali hydrolysis of PDLLA films to produce a density gradient of -COOH moieties onto the films, which were activated and then covalently linked with collagen. A collagen surface-density gradient onto PDLLA films was thus generated by this approach. Contact angle measurement and confocal laser scanning microscopy (CLSM) were employed to confirm the formation of -COOH gradient and collagen gradient, respectively. All results proved the feasibility of the fabrication of a collagen density gradient onto PDLLA films via the approach. Endothelial cells cultured on the gradient areas with low and moderate collagen surface-densities displayed a strong motility tendency, with the values such as net displacement, total distance, chemotactic index, migration rate and cell trajectories in parallel to the gradient. However, endothelial cells grew on the gradient area with high collagen density demonstrated a reverse response to the collagen gradient clue. These results suggest that cell motility is regulated by the collagen gradient with a surface-density dependent manner. This study provides an alternative for the fabrication of protein surface-density gradient onto biodegradable substrates to investigate chemical stimuli induced cell directional motility. It is potentially important for understanding the controlled angiogenesis for implantation of tissue-engineered constructs.

Preparation of collagen modified photopolymers: a new type of biodegradable gel for cell growth

In this study a new branched methacrylated poly(propylene glycol-co-lactic acid) (PPG-PLA-IEM) and methacrylated cellulose acetate butyrate resin (CAB-IEM) were synthesized. Hydrogels with various amounts of PPG-PLA-IEM and CAB-IEM (25, 50 and 75 wt% IEM modified) were prepared by photopolymerization. Collagen tethered PEG-monoacrylate (PEGMA-collagen) was prepared and introduced as a bioactive moiety to modify the hydrogel in order to enhance cell affinity. In vitro attachment and growth of 3T3 mouse fibroblasts and human umbilical vein endothelial cells (HUVEC) on the hydrogels with and without collagen were also investigated. It was observed that, the collagen improves the cell adhesion onto the hydrogel surface. With the increasing amount of collagen, cell viability increased by 28% for ECV304 (P < 0.05) and 30% for 3T3 (P < 0.05).

Collagen-coated microparticles in drug delivery

Advantages of drug-incorporated collagen particles have been described for the controlled delivery system for therapeutic actions. The attractiveness of collagen lies in its low immunogenicity and high biocompatibility. It is also recognized by the body as a natural constituent rather than a foreign body. Our research and development efforts are focused towards addressing some of the limitations of collagen, like the high viscosity of an aqueous phase, nondissolution in neutral pH buffers, thermal instability (denaturation) and biodegradability, to make it an ideal material for drug delivery with particular reference to microparticles. These limitations could be overcome by making collagen conjugates with other biomaterials or chemically modifying collagen monomer without affecting its triple helical conformation and maintaining its native properties. This article highlights collagen microparticles' present status as a carrier in drug delivery.

Immobilization of biomolecules on the surface of electrospun polycaprolactone fibrous scaffolds for tissue engineering

To make polycaprolactone (PCL) more suitable for tissue engineering, PCL in the form of electrospun fibrous scaffolds was first modified with 1,6-hexamethylenediamine to introduce amino groups on their surface. Various biomolecules, i.e., collagen, chitosan, and Gly-Arg-Gly-Asp-Ser (GRGDS) peptide, were then immobilized on their surface, with N,N'-disuccinimidylcarbonate being used as the coupling agent. Dynamic water contact angle measurement indicated that the scaffold surface became more hydrophilic after the aminolytic treatment and the subsequent immobilization of the biomolecules. The appropriateness of these PCL fibrous scaffolds for the tissue/cell culture was evaluated in vitro with three different cell lines, e.g., mouse fibroblasts (L929), human epidermal keratinocytes (HEK001), and mouse calvaria-derived preosteoblastic cells (MC3T3-E1). Both the neat and the modified PCL fibrous scaffolds released no substances in the levels that were harmful to these cells. Among the various biomolecule-immobilized PCL fibrous scaffolds, the ones that had been immobilized with type I collagen, a Arg-Gly-Asp-containing protein, showed the greatest ability to support both the attachment and the proliferation of all of the investigated cell types, followed by those that had been immobilized with GRGDS peptide.

Poly(lactic acid) scaffold fabricated by gelatin particle leaching has good biocompatibility for chondrogenesis

Three-dimensional poly(L-lactic acid) (PLLA) scaffolds with high porosity and an average pore size of 280-450 microm were fabricated using gelatin particles as porogen. The particles were bonded together by incubation in saturated water vapor at 70 degrees C for 3.5 h. After casting the PLLA/1,4-dioxane solution, freeze-drying and porogen leaching with 70 degrees C water, a porous scaffold with well-interconnected pores and some nano-fibers was obtained. The biological performance of the scaffold was evaluated by in vitro chondrocyte culture and in vivo implantation. In comparison with the control scaffold fabricated with NaCl particles as porogen under the same conditions, the experimental scaffold had better biological performance because the gelatin molecules were stably entrapped onto the pore surfaces. A larger number of cells in the experimental scaffold were observed by confocal laser scanning microscopy after the viable cells had been stained with fluorescein diacetate. The chondrocytes showed more spreading morphology. Higher cytoviability and secretion of glycosaminoglycan (GAG) were also determined in the experimental scaffold. After implantation of the chondrocytes/PLLA scaffold construct to the subcutaneous dorsum of nude mice for 30-120 days, cartilage-like specimens were harvested. Histological examination showed that the regenerated cartilages had a large quantity of collagen and GAG.