Mechanism of in vitro collagen fibril assembly. Kinetic and morphological studies

Synthetic, multi-dynamic hydrogels by uniting stress-stiffening and supramolecular polymers

Nature uses discrete molecular building blocks to form polymers that assemble into multicomponent, multi-dynamic networks, inside (cytoskeleton) and outside (extracellular matrix) the cell. Both the intra-fibrous molecular dynamics and interactions between fibers dictate (non)linear mechanics, such as stress stiffening and relaxation, and ultimately biological function. Current synthetic systems capture only one dynamic process. Here, we present multi-dynamic hydrogels by uniting a stress-stiffening polymer with supramolecular polymers. Crucial is the molecular dynamics of the supramolecular polymers: They dictate the interaction strength with the stress-stiffening polymer and the subsequent dynamic mechanical properties of the mixed networks. The biological relevance of our multi-dynamic hydrogels is demonstrated by their ability to support fibroblast cell spreading. Future work may address the display of various dynamically presented bioactive cues to cells.

Development of biomimetic co-culture and tri-culture models to mimic the complex structure of the alveolar-capillary barrier

Alveoli are the functional area of respiratory system where the gaseous exchanges take place at level of the alveolar-capillary barrier. The development of safe and effective therapeutic approaches for treating lung disease is currently limited due to the lack of realistic preclinical models for their testing and validation. In this work, tissue engineering approaches were exploited to develop a biomimetic platform that provide an appropriate mimicking of the extracellular environment and the multicellular architecture of human alveoli. Here, we propose the implementation of two biomimetic in vitro models to reproduce the features of the main anatomic portions of the physiological alveolar-capillary barrier. First, a co-culture barrier model was obtained by integrating an electrospun polycaprolactone-gelatin (PCL-Gel) membrane in a modified transwell insert (PCL-Gel TW) to mimic the alveolar basement membrane (coded as thin model). Alveolar epithelial (A549) and lung microvascular endothelial (HULEC-5a) cells were cultured on the apical and basolateral side of the PCL-Gel membrane, respectively, under physiologic air-liquid interface (ALI) conditions for 7 days. The ALI condition promoted the expression of type I and type II alveolar epithelial cell markers and the secretion of mucus in A549 cells. Increased cell viability and barrier properties in co-cultures of A549 and HULEC-5a compared to mono-cultures revealed the effectiveness of the model to reproduce in vitro physiological-relevant features of the alveolar-capillary barrier. The second portion of the alveolar-capillary barrier was developed implementing a tri-culture model (coded as thick model) including a type I collagen (COLL) hydrogel formulated to host lung fibroblasts (MRC-5). The thick barrier model was implemented by seeding HULEC-5a on the basolateral side of PCL-Gel TW and then pouring sequentially MRC-5-laden COLL hydrogel and A549 cells on the apical side of the electrospun membrane. The thick model was maintained up to 7 days at ALI and immunofluorescence staining of tight and adherent junctions demonstrated the formation of a tight barrier. Lastly, the ability of models to emulate pathological inflammatory conditions was validated by exposing the apical compartment of the PCL-Gel TW to lipopolysaccharide (LPS). The damage of A549 tight junctions, the increase of barrier permeability and IL-6 pro-inflammatory cytokine release was observed after 48 h exposure to LPS.

Constructing 3D In Vitro Models of Heterocellular Solid Tumors and Stromal Tissues Using Extrusion-Based Bioprinting

Malignant tumor tissues exhibit inter- and intratumoral heterogeneities, aberrant development, dynamic stromal composition, diverse tissue phenotypes, and cell populations growing within localized mechanical stresses in hypoxic conditions. Experimental tumor models employing engineered systems that isolate and study these complex variables using in vitro techniques are under development as complementary methods to preclinical in vivo models. Here, advances in extrusion bioprinting as an enabling technology to recreate the three-dimensional tumor milieu and its complex heterogeneous characteristics are reviewed. Extrusion bioprinting allows for the deposition of multiple materials, or selected cell types and concentrations, into models based upon physiological features of the tumor. This affords the creation of complex samples with representative extracellular or stromal compositions that replicate the biology of patient tissue. Biomaterial engineering of printable materials that replicate specific features of the tumor microenvironment offer experimental reproducibility, throughput, and physiological relevance compared to animal models. In this review, we describe the potential of extrusion-based bioprinting to recreate the tumor microenvironment within in vitro models.

Self-assembly study of type I collagen extracted from male Wistar Hannover rat tail tendons

BACKGROUND

Collagen, the most abundant protein in the animal kingdom, represents a promising biomaterial for regenerative medicine applications due to its structural diversity and self-assembling complexity. Despite collagen's widely known structural and functional features, the thermodynamics behind its fibrillogenic self-assembling process is still to be fully understood. In this work we report on a series of spectroscopic, mechanical, morphological and thermodynamic characterizations of high purity type I collagen (with a D-pattern of 65 nm) extracted from Wistar Hannover rat tail. Our herein reported results can be of help to elucidate differences in self-assembly states of proteins using ITC to improve the design of energy responsive and dynamic materials for applications in tissue engineering and regenerative medicine.

METHODS

Herein we report the systematic study on the self-assembling fibrillogenesis mechanism of type I collagen, we provide morphological and thermodynamic evidence associated to different self-assembly events using ITC titrations. We provide thorough characterization of the effect of pH, effect of salts and protein conformation on self-assembled collagen samples via several complementary biophysical techniques, including circular dichroism (CD), Fourier Transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), scanning electron microscopy (SEM), dynamic mechanical thermal analysis (DMTA) and thermogravimetric analysis (TGA).

RESULTS

Emphasis was made on the use of isothermal titration calorimetry (ITC) for the thermodynamic monitoring of fibrillogenesis stages of the protein. An overall self-assembly enthalpy value of 3.27 ± 0.85 J/mol was found. Different stages of the self-assembly mechanism were identified, initial stages take place at pH values lower than the protein isoelectric point (pI), however, higher energy release events were recorded at collagen's pI. Denatured collagen employed as a control exhibited higher energy absorption at its pI, suggesting different energy exchange mechanisms as a consequence of different aggregation routes.

In vivo evaluation of Vivere bovine pericardium valvular bioprosthesis with a new anti-calcifying treatment

The objective of this study was to evaluate the effect of chemical treatment with glutamic acid to avoid calcification of biological cardiac valves. The bovine pericardium (BP) tissues were fixed with 0.5% glutaraldehyde (BP/GA), followed by treatment with glutamic acid (BP/GA + Glu) for neutralization of the free aldehyde groups. Microscopic analysis showed that the wavy structure of collagen fibrils was preserved, but changes in elastin's integrity occurred. However, the treatment did not promote undesirable changes in the thermal and mechanical properties of the modified BPs. These samples were systematically studied in rat subcutaneous tissue: control (BP/GA) and anticalcificant (BP/GA + Glu). After 60 days, both groups induced similar inflammatory reactions. In terms of calcification, BP/GA + Glu remained more stable with a lower index (3.1 ± 0.2 μg Ca²⁺ /mg dry tissue), whereas for BP/GA it was 5.7 ± 1.3 μg Ca²⁺ /mg dry tissue. Bioprostheses made from BP/GA + Glu were implanted in the pulmonary position in sheep, and in vivo echocardiographic analyses revealed maintenance of valvar function after 180 days, with low gradients and minimal valve insufficiency. The explanted tissues of the BP/GA + Glu group had a lower average calcium content 3.8 ± 3.0 μg Ca²⁺ /mg dry tissue. The results indicated high anticalcification efficiency of BP/GA + Glu in both subcutaneous implant in rats and in the experimental sheep model, which is an advantage that should encourage the industrial application of these materials for the manufacture of bioprostheses.

Non-invasive acoustic fabrication methods to enhance collagen hydrogel bioactivity

Much attention has focused recently on utilizing components of the extracellular matrix (ECM) as natural building blocks for a variety of tissue engineering applications and regenerative medicine therapies. Consequently, new fabrication methods are being sought to enable molecular control over the structural characteristics of ECM molecules in order to improve their biological function. Exposing soluble collagen to acoustic forces associated with ultrasound propagation produces localized variations in collagen microfiber organization that in turn, promote cell behaviors essential for tissue regeneration, including cell migration and matrix remodeling. In the present study, mechanisms by which ultrasound interacts with polymerizing collagen to produce functional changes in collagen microstructure were investigated. The rate of collagen polymerization was manipulated by adjusting the pH of collagen solutions and the temperature at which gels were polymerized. Results demonstrate that the phase transition of type I collagen from fluid to gel triggered a simultaneous increase in acoustic absorption. This phase transition of collagen involves the lateral growth of early-stage collagen microfibrils and importantly, corresponded to a defined period of time during which exposure to ultrasound introduced both structural and functional changes to the resultant collagen hydrogels. Together, these experiments isolated a critical window in the collagen fiber assembly process during which mechanical forces associated with ultrasound propagation are effective in producing structural changes that underlie the ability of acoustically-modified collagen hydrogels to stimulate cell migration. These results demonstrate that changes in material properties associated with collagen polymerization are a fundamental component of the mechanism by which acoustic forces modify collagen biomaterials to enhance biological function.

Nanoscale Imaging of Collagen Gels with Focused Ion Beam Milling and Scanning Electron Microscopy

In vitro polymerized type I collagen hydrogels have been used extensively as a model system for three-dimensional (3D) cell and tissue culture, studies of fibrillogenesis, and investigation of multiscale force transmission within connective tissues. The nanoscale organization of collagen fibrils plays an essential role in the mechanics of these gels and emergent cellular behavior in culture, yet quantifying 3D structure with nanoscale resolution to fully characterize fibril organization remains a significant technical challenge. In this study, we demonstrate that a new imaging modality, focused ion beam scanning electron microscopy (FIB-SEM), can be used to generate 3D image datasets for visualizing and quantifying complex nanoscale organization and morphometry in collagen gels. We polymerized gels at a number of concentrations and conditions commonly used for in vitro models, stained and embedded the samples, and performed FIB-SEM imaging. The resulting image data had a voxel size of 25 nm, which is the highest resolution 3D data of a collagen fibril network ever obtained for collagen gels. This resolution was essential for discerning individual fibrils, fibril paths, and their branching and grouping. The resulting volumetric images revealed that polymerization conditions have a significant impact on the complex fibril morphology of the gels. We segmented the fibril network and demonstrated that individual collagen fibrils can be tracked in 3D space, providing quantitative analysis of network descriptors such as fibril diameter distribution, length, branch points, and fibril aggregations. FIB-SEM 3D reconstructions showed considerably less lateral grouping and overlap of fibrils than standard 2D SEM images, likely due to artifacts in SEM introduced by dehydration. This study demonstrates the utility of FIB-SEM for 3D imaging of collagen gels and quantitative analysis of 3D fibril networks. We anticipate that the method will see application in future studies of structure-function relationships in collagen gels as well as native collagenous tissues.

Cell-instructive starPEG-heparin-collagen composite matrices

Polymer hydrogels can be readily modulated with regard to their physical properties and functionalized to recapitulate molecular cues of the extracellular matrix (ECM). However, they remain structurally different from the hierarchical supramolecular assemblies of natural ECM. Accordingly, we herein report a set of hydrogel composite materials made from starPEG-peptide conjugates, maleimide-functionalized heparin and collagen type I that combine semisynthetic and ECM-derived components. Collagen fibrillogenesis was controlled by temperature and collagen concentration to form collagen microstructures which were then homogeneously distributed within the 3D composite matrix during hydrogel formation. The collagen-laden hydrogel materials showed a heterogeneous local variation of the stiffness and adhesion ligand density. Composite gels functionalized with growth factors and cell adhesive peptides (RGDSP) supported the growth of embedded human umbilical cord vein endothelial cells (HUVECs) and induced the alignment of embedded bone marrow-derived human mesenchymal stem cells (MSCs) to the collagen microstructures in vitro. The introduced composite hydrogel material is concluded to faithfully mimic cell-instructive features of the ECM.

STATEMENT OF SIGNIFICANCE

Cell-instructive materials play an important role in the generation of both regenerative therapies and advanced tissue and disease models. For that purpose, biofunctional polymer hydrogels recapitulating molecular cues of the extracellular matrix (ECM) were successfully applied in various different studies. However, hydrogels generally lack the hierarchical supramolecular structure of natural ECM. We have therefore developed a hydrogel composite material made from starPEG-peptide conjugates, maleimide-functionalized heparin and collagen type I fibrils. The collagen-laden scaffolds showed a heterogeneous local variation in the stiffness of the material. The composite gels were successfully tested in culture experiments with human umbilical cord vein endothelial cells and bone marrow-derived human mesenchymal stem cells. It was concluded that the composite scaffold was able to faithfully mimic important cell-instructive features of the ECM.

Chitosan coatings with enhanced biostability in vivo

In this article, we study the stability of chitosan coatings applied on glutaraldehyde-stabilized bovine pericardium when exposed to biodegradation in vivo in the course of model subcutaneous tests on rats. The coatings were deposited from carbonic acid solutions, that is, H₂ O saturated with CO₂ at high pressure. Histological sections of treated pericardium samples demonstrated that the structure of pericardial connective tissues was not significantly altered by the coating application method. It was revealed that the dynamics of biodegradation depended on the total mass of chitosan applied as well as on the DDA of chitosan used. As long as the amount of chitosan did not exceed a certain threshold limit, no detectable degradation occurred within the time of the tests (12 weeks for the rat model). For higher chitosan amounts, we detected a ∼20% reduction of the mass after the in vivo exposition. The presumed mechanism of such behavior is discussed. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 270-277, 2018.

Swim bladder collagen forms hydrogel with macroscopic superstructure by diffusion induced fast gelation

Marine collagen has been attracting attention as a medical material in recent times due to the low risk of pathogen infection compared to animal collagen. Type I collagen extracted from the swim bladder of Bester sturgeon fish has excellent characteristics such as high denaturation temperature, high solubility, low viscosity and an extremely fast rate to form large bundle of fibers under certain conditions. These specific characteristics of swim bladder collagen (SBC) permit us to create stable, disk shaped hydrogels with concentric orientation of collagen fibers by the controlled diffusion of neutral buffer through collagen solution at room temperature. However, traditionally used animal collagens, e.g. calf skin collagen (CSC) and porcine skin collagen (PSC), could not form any stable and oriented structure by this method. The mechanism of the superstructure formation of SBC by a diffusion induced gelation process has been explored. The fast fibrillogenesis rate of SBC causes a quick squeezing out of the solvent from the gel phase to the sol phase during gelation, which builds an internal stress at the gel-sol interface. The tensile stress induces the collagen molecules of the gel phase to align along the gel-sol interface direction to give this concentric ring-shaped orientation pattern. On the other hand, the slow fibrillogenesis rate of animal collagens due to the high viscosity of the solution does not favor the ordered structure formation. The denaturation temperature of SBC increases significantly from 31 °C to 43 °C after gelation, whereas that of CSC and PSC were found to increase a little. Rheology experiment shows that the SBC gel has storage modulus larger than 15 kPa. The SBC hydrogels with thermal and mechanical stability have potential as bio-materials for tissue engineering applications.

In vitro collagen fibril alignment via incorporation of nanocrystalline cellulose

This study demonstrates a method for producing ordered collagen fibrils on a similar length scale to those in the cornea, using a one-pot liquid-phase synthesis. The alignment persists throughout samples on the mm scale. The addition of nanocrystalline cellulose (NCC), a biocompatible and widely available material, to collagen prior to gelation causes the fibrils to align and achieve a narrow size distribution (36±8nm). The effects of NCC loading in the composites on microstructure, transparency and biocompatibility are studied by scanning electron microscopy, ultraviolet-visible spectroscopy and cell growth experiments. A 2% loading of NCC increases the transparency of collagen while producing an ordered microstructure. A mechanism is proposed for the ordering behavior on the basis of enhanced hydrogen bonding during collagen gel formation.

Thermal memory in self-assembled collagen fibril networks

Collagen fibrils form extracellular networks that regulate cell functions and provide mechanical strength to tissues. Collagen fibrillogenesis is an entropy-driven process promoted by warming and reversed by cooling. Here, we investigate the influence of noncovalent interactions mediated by the collagen triple helix on fibril stability. We measure the kinetics of cold-induced disassembly of fibrils formed from purified collagen I using turbimetry, probe the fibril morphology by atomic force microscopy, and measure the network connectivity by confocal microscopy and rheometry. We demonstrate that collagen fibrils disassemble by subunit release from their sides as well as their ends, with complex kinetics involving an initial fast release followed by a slow release. Surprisingly, the fibrils are gradually stabilized over time, leading to thermal memory. This dynamic stabilization may reflect structural plasticity of the collagen fibrils arising from their complex structure. In addition, we propose that the polymeric nature of collagen monomers may lead to slow kinetics of subunit desorption from the fibril surface. Dynamic stabilization of fibrils may be relevant in the initial stages of collagen assembly during embryogenesis, fibrosis, and wound healing. Moreover, our results are relevant for tissue repair and drug delivery applications, where it is crucial to control fibril stability.

In vitro fibrillogenesis of collagen type I in varying ionic and pH conditions

Collagen is the most abundant protein in the human body, and has primary roles in the formation of tendons, cartilage and bone, it provides mechanical strength to skin and indeed almost every organ and muscle is associated with a layer of collagen. It is thus a key component of the extracellular matrix. Here we have studied the in vitro fibrillogenesis of acetic acid-soluble collagen type I under physiological and varying non-physiological conditions by TEM from negatively stained specimens. At pH 2.5 the collagen heterotrimer remains soluble at increasing buffer concentrations and in the presence of increasing NaCl concentrations. At pH 4.5 molecular aggregates form at low NaCl concentrations, but at higher NaCl concentrations fibrils with a diffuse ~11 nm banding are formed. At pH 7.0, initial molecular aggregates form at low NaCl concentrations that progressively form characteristic ~67 nm D-banded collagen fibrils at intermediate NaCl concentrations that cluster to form thicker multi-fibril D-banded fibres in higher NaCl concentrations. By contrast, increasing concentrations of sodium phosphate at pH 7.0 leads to the formation of flexuous, unbanded fibrils at higher concentrations from the initial, loosely aggregated form of collagen. At higher pHs, the formation of D-banded fibrils is less efficient, particularly at pH 9.0. Thus at neutral pH, the presence of chloride anions, rather than sodium cations, is required for the production of D-banded collagen fibrils; higher than normal physiological chloride concentrations in the form of NaCl or Tris·HCl at neutral pH, but not phosphate buffer, can also lead to the efficient in vitro formation of D-banded collagen fibrils.

Injectable hydrogel therapies and their delivery strategies for treating myocardial infarction

INTRODUCTION

Heart failure following myocardial infarction (MI) impacts millions of people each year in the US. The field of tissue engineering has developed several potential therapies for treating MI including injectable acellular hydrogels. These injectable biomaterials can either be synthetic or naturally derived, and have the potential to be delivered minimally invasively.

AREAS COVERED

This review covers the different methods of delivery and presents the initial work on the use of injectable biomaterial scaffolds alone to improve cardiac function post-MI. Several naturally derived materials including alginate, collagen, chitosan, decellularized tissues, fibrin, hyaluronic acid, keratin, and Matrigel, as well as a few synthetic materials have shown promise on their own without the addition of therapeutics such as cells or growth factors. These biomaterials can be potentially delivered via endocardial, epicardial, or intracoronary injections and some can even utilize current catheter technology, indicating a potential for avoiding invasive surgical procedures. Once injected into the wall of the heart, these hydrogels create a scaffold that provides biochemical and structural cues, and the ability for cellular infiltration and remodeling of the local environment.

EXPERT OPINION

Injectable biomaterials have several crucial challenges that should be over come to design optimal therapies for MI and heart failure, including optimizing material properties, methods of injection and understanding the mechanisms of action. But, studies in both small and large animals have shown significant improvement in important parameters including wall thickness, vascularization of the ischemic region, left ventricular volumes, and cardiac function. Thus, the application of injectable biomaterials shows promise for developing into new therapies to treat MI, potentially improving millions of lives.

Peptidyl 3-hydroxyproline binding properties of type I collagen suggest a function in fibril supramolecular assembly

Proline residues in collagens are extensively hydroxylated post-translationally. A rare form of this modification, (3S,2S)-l-hydroxyproline (3Hyp), remains without a clear function. Disruption of the enzyme complex responsible for prolyl 3-hydroxylation results in severe forms of recessive osteogenesis imperfecta (OI). These OI types exhibit a loss of or reduction in the level of 3-hydroxylation at two proline residues, α1(I) Pro986 and α2(I) Pro707. Whether the resulting brittle bone phenotype is caused by the lack of the 3-hydroxyl addition or by another function of the enzyme complex is unknown. We have speculated that the most efficient mechanism for explaining the chemistry of collagen intermolecular cross-linking is for pairs of collagen molecules in register to be the subunit that assembles into fibrils. In this concept, the exposed hydroxyls from 3Hyp are positioned within mutually interactive binding motifs on adjacent collagen molecules that contribute through hydrogen bonding to the process of fibril supramolecular assembly. Here we report observations on the physical binding properties of 3Hyp in collagen chains from experiments designed to explore the potential for interaction using synthetic collagen-like peptides containing 3Hyp. Evidence of self-association was observed between a synthetic peptide containing 3Hyp and the CB6 domain of the α1(I) chain, which contains the single fully 3-hydroxylated proline. Using collagen from a case of severe recessive OI with a CRTAP defect, in which Pro986 was minimally 3-hydroxylated, such binding was not observed. Further study of the role of 3Hyp in supramolecular assembly is warranted for understanding the evolution of tissue-specific variations in collagen fibril organization.

Collagen oligomers modulate physical and biological properties of three-dimensional self-assembled matrices

Elucidation of mechanisms underlying collagen fibril assembly and matrix-induced guidance of cell fate will contribute to the design and expanded use of this biopolymer for research and clinical applications. Here, we define how Type I collagen oligomers affect in-vitro polymerization kinetics as well as fibril microstructure and mechanical properties of formed matrices. Monomers and oligomers were fractionated from acid-solubilized pig skin collagen and used to generate formulations varying in monomer/oligomer content or average polymer molecular weight (AMW). Polymerization half-times decreased with increasing collagen AMW and closely paralleled lag times, indicating that oligomers effectively served as nucleation sites. Furthermore, increasing AMW yielded matrices with increased interfibril branching and had no correlative effect on fibril density or diameter. These microstructure changes increased the stiffness of matrices as evidenced by increases in both shear storage and compressive moduli. Finally, the biological relevance of modulating collagen AMW was evidenced by the ability of cultured endothelial colony forming cells to sense associated changes in matrix physical properties and alter vacuole and capillary-like network formation. This work documents the importance of oligomers as another physiologically-relevant design parameter for development and standardization of polymerizable collagen formulations to be used for cell culture, regenerative medicine, and engineered tissue applications.

Hyaluronan concentration within a 3D collagen matrix modulates matrix viscoelasticity, but not fibroblast response

The use of 3D extracellular matrix (ECM) microenvironments to deliver growth-inductive signals for tissue repair and regeneration requires an understanding of the mechanisms of cell-ECM signaling. Recently, hyaluronic acid (HA) has been incorporated in collagen matrices in an attempt to recreate tissue specific microenvironments. However, it is not clear how HA alters biophysical properties (e.g. fibril microstructure and mechanical behavior) of collagen matrices or what impact these properties have on cell behavior. The present study determined the effects of varying high molecular weight HA concentration on 1) the assembly kinetics, fibril microstructure, and viscoelastic properties of 3D type I collagen matrices and 2) the response of human dermal fibroblasts, in terms of morphology, F-actin organization, contraction, and proliferation within the matrices. Results showed increasing HA concentration up to 1 mg/ml (HA:collagen ratio of 1:2) did not significantly alter fibril microstructure, but did significantly alter viscoelastic properties, specifically decreasing shear storage modulus and increasing compressive resistance. Interestingly, varied HA concentration did not significantly affect any of the measured fibroblast behaviors. These results show that HA-induced effects on collagen matrix viscoelastic properties result primarily from modulation of the interstitial fluid with no significant change to the fibril microstructure. Furthermore, the resulting biophysical changes to the matrix are not sufficient to modulate the cell-ECM mechanical force balance or proliferation of resident fibroblasts. These results provide new insight into the mechanisms by which cells sense and respond to microenvironmental cues and the use of HA in collagen-based biomaterials for tissue engineering.

Rheology and confocal reflectance microscopy as probes of mechanical properties and structure during collagen and collagen/hyaluronan self-assembly

In this work, the gelation of three-dimensional collagen and collagen/hyaluronan (HA) composites is studied by time sweep rheology and time lapse confocal reflectance microscopy (CRM). To investigate the complementary nature of these techniques, first collagen gel formation is investigated at concentrations of 0.5, 1.0, and 1.5 mg/mL at 37 degrees C and 32 degrees C. The following parameters are used to describe the self-assembly process in all gels: the crossover time (t(c)), the slope of the growth phase (k(g)), and the arrest time (t(a)). The first two measures are determined by rheology, and the third by CRM. A frequency-independent rheological measure of gelation, t(g), is also measured at 37 degrees C. However, this quantity cannot be straightforwardly determined for gels formed at 32 degrees C, indicating that percolation theory does not fully capture the dynamics of collagen network formation. The effects of collagen concentration and gelation temperature on k(g), t(c), and t(a) as well as on the mechanical properties and structure of these gels both during gelation and at equilibrium are elucidated. Composite collagen/HA gels are also prepared, and their properties are monitored at equilibrium and during gelation at 37 degrees C and 32 degrees C. We show that addition of HA subtly alters mechanical properties and structure of these systems both during the gelation process and at equilibrium. This occurs in a temperature-dependent manner, with the ratio of HA deposited on collagen fibers versus that distributed homogeneously between fibers increasing with decreasing gelation temperature. In addition to providing information on collagen and collagen/HA structure and mechanical properties during gelation, this work shows new ways in which rheology and microscopy can be used complementarily to reveal details of gelation processes.

Expression of type I procollagen genes

All of the type I collagen in connective tissue is the product of one structural gene for the pro alpha 1(I) chain and another for the pro alpha 2(I) chain of type I procollagen. An intriguing question therefore is how the expression of the two genes differs in mineralizing and non-mineralizing tissues. One approach that our laboratory has pursued to answer this and related questions is to develop a new system whereby one can examine the self-assembly of collagen fibrils de novo by controlled enzymic cleavage of procollagen to collagen under physiological conditions. The system has made it possible for the first time to define thermodynamic parameters for the self-assembly process. We are now using the system to define the normal kinetics for fibril formation. The results should make it possible to study the effects of other components of extracellular matrix on fibril assembly, including the effects of bone-specific components that initiate mineralization. A second approach has been to define mutations in type I procollagen genes that cause increased brittleness of bone. Over a dozen mutations in type I procollagen genes have been found in probands with osteogenesis imperfecta. One of the surprises has been that at least 25% of the probands with lethal variants of osteogenesis imperfecta have mutations in type I procollagen genes. Another surprise has been the observation that a number of the mutations are tissue specific in terms of their phenotypic manifestations even though the same abnormal pro alpha chains are being synthesized in a variety of tissues.

Self-association of Collagen Triple Helic Peptides into Higher Order Structures

Interest in self-association of peptides and proteins is motivated by an interest in the mechanism of physiologically higher order assembly of proteins such as collagen as well as the mechanism of pathological aggregation such as beta-amyloid formation. The triple helical form of (Pro-Hyp-Gly)(10), a peptide that has proved a useful model for molecular features of collagen, was found to self-associate, and its association properties are reported here. Turbidity experiments indicate that the triple helical peptide self-assembles at neutral pH via a nucleation-growth mechanism, with a critical concentration near 1 mM. The associated form is more stable than individual molecules by about 25 degrees C, and the association is reversible. The rate of self-association increases with temperature, supporting an entropically favored process. After self-association, (Pro-Hyp-Gly)(10) forms branched filamentous structures, in contrast with the highly ordered axially periodic structure of collagen fibrils. Yet a number of characteristics of triple helix assembly for the peptide resemble those of collagen fibril formation. These include promotion of fibril formation by neutral pH and increasing temperature; inhibition by sugars; and a requirement for hydroxyproline. It is suggested that these similar features for peptide and collagen self-association are based on common lateral underlying interactions between triple helical molecules mediated by hydrogen-bonded hydration networks involving hydroxyproline.

A study of the influence of polysaccharides on collagen self-assembly: Nanostructure and kinetics

Collagen, a critical part of the extra-cellular matrix of tissues, is a popular native material for building scaffolding for tissue-engineering applications. To mimic the structural and functional profiles of materials found in the native extra-cellular matrix, numerous efforts have been made toward developing a novel scaffold combining collagen with other biomacromolecules. All of these works have been focused on improving the mechanical or biochemical properties of the collagen-based matrix. Unfortunately, most of these studies have failed to consider the nanostructure of collagen in the complex matrix. The aim of our study was to investigate the aggregation pattern of collagen after addition of polysaccharides with positive or negative charge, the dose-response relationship, and the effect on reconstitution kinetics. Generally, collagen self-assembles into fibrils with a diameter of around 95 nm but, in the presence of various polysaccharides in varying amounts, collagen self-assembles into different shapes with larger diameters compared with collagen alone. Although the morphology and diameter of the collagen fibrils varies with reconstitution conditions, the D-periods of the fibrils all remained the same regardless of the species or concentration of polysaccharides. The kinetics of fibril formation was determined from turbidity-time curves. All turbidity curves demonstrated that polysaccharides only alter the lag time and time frame of reconstitution, but have no significant effect on the mechanism of reconstitution. Together our data indicate that the presence of biomacromolecules can alter the kinetics and the 3D fibril ultrastructure of assembled collagen and that the consequent structural changes may affect cellular responses in medical applications.

Dentin matrix protein 1 immobilized on type I collagen fibrils facilitates apatite deposition in vitro

During bone and dentin mineralization, the crystal nucleation and growth processes are considered to be matrix regulated. Osteoblasts and odontoblasts synthesize a polymeric collagenous matrix, which forms a template for apatite initiation and elongation. Coordinated and controlled reaction between type I collagen and bone/dentin-specific noncollagenous proteins are necessary for well defined biogenic crystal formation. However, the process by which collagen surfaces become mineralized is not understood. Dentin matrix protein 1 (DMP1) is an acidic noncollagenous protein expressed during the initial stages of mineralized matrix formation in bone and dentin. Here we show that DMP1 bound specifically to type I collagen, with the binding region located at the N-telopeptide region of type I collagen. Peptide mapping identified two acidic clusters in DMP1 responsible for interacting with type I collagen. The collagen binding property of these domains was further confirmed by site-directed mutagenesis. Transmission electron microscopy analyses have localized DMP1 in the gap region of the collagen fibrils. Fibrillogenesis assays further demonstrated that DMP1 accelerated the assembly of the collagen fibrils in vitro and also increased the diameter of the reconstituted collagen fibrils. In vitro mineralization studies in the presence of calcium and phosphate ions demonstrated apatite deposition only at the collagen-bound DMP1 sites. Thus specific binding of DMP1 and possibly other noncollagenous proteins on the collagen fibril might be a key step in collagen matrix organization and mineralization.

Hierarchical assembly and the onset of banding in fibrous long spacing collagen revealed by atomic force microscopy

The mechanism of formation of fibrillar collagen with a banding periodicity much greater than the 67 nm of native collagen, i.e. the so-called fibrous long spacing (FLS) collagen, has been speculated upon, but has not been previously studied experimentally from a detailed structural perspective. In vitro, such fibrils, with banding periodicity of approximately 270 nm, may be produced by dialysis of an acidic solution of type I collagen and alpha(1)-acid glycoprotein against deionized water. FLS collagen assembly was investigated by visualization of assembly intermediates that were formed during the course of dialysis using atomic force microscopy. Below pH 4, thin, curly nonbanded fibrils were formed. When the dialysis solution reached approximately pH 4, thin, filamentous structures that showed protrusions spaced at approximately 270 nm were seen. As the pH increased, these protofibrils appeared to associate loosely into larger fibrils with clear approximately 270 nm banding which increased in diameter and compactness, such that by approximately pH 4.6, mature FLS collagen fibrils begin to be observed with increasing frequency. These results suggest that there are aspects of a stepwise process in the formation of FLS collagen, and that the banding pattern arises quite early and very specifically in this process. It is proposed that typical 4D-period staggered microfibril subunits assemble laterally with minimal stagger between adjacent fibrils. alpha(1)-Acid glycoprotein presumably promotes this otherwise abnormal lateral assembly over native-type self-assembly. Cocoon-like fibrils, which are hundreds of nanometers in diameter and 10-20 microm in length, were found to coexist with mature FLS fibrils.

In vitro formation by reverse dialysis of collagen gels containing highly oriented arrays of fibrils

Acid extracts of rat tail tendon were subjected to reverse dialysis against 0.5% PEG at 4 degrees C in an attempt to induce liquid crystallization. After 48 h, gel and fibril formation were initiated by continuing dialysis at 20 degrees C against the same PEG solution adjusted to pH 7.4. The inclusion of calcium- or magnesium chloride (final concentration 0.3-33 mM) in the collagen solution before dialysis resulted in strongly birefringent gels that showed a progressive rotation of the slow axis of birefringence with increasing distance from the lateral margin of the gel. The gels contained fibers running predominantly in the plane of the flattened gel and crossing at angles of between 55 degrees and 90 degrees. We suggest that liquid crystallization is responsible for this phenomenon and that it might be possible to exploit this to produce materials for tissue engineering.

Cleavage of type I procollagen by human mast cell chymase initiates collagen fibril formation and generates a unique carboxyl-terminal propeptide

The ability of human mast cell chymase and tryptase to process procollagen was examined. Purified human intestinal smooth muscle cell procollagen was incubated with human mast cell tryptase or human mast cell chymase. Purified chymase, but not tryptase, exhibited procollagen proteinase activity in the presence of EDTA. Addition of purified porcine heparin over a range of 0.1-100 microg/ml did not affect either the rate or the products of procollagen chymase cleavage. The cleavage site of chymase on the pro-alpha1(I) collagen carboxyl terminus was found to be in the propeptide region at Leu-1248-Ser-1249. Cleavage at this site suggested that the collagen products would form fibrils and confirmed the production of a unique carboxyl-terminal propeptide. Turbidometric fibril formation assay demonstrated de novo formation of chymase-generated collagen fibrils with characteristic lag, growth, and plateau phases. When observed by dark field microscopy, these fibrils were similar to fibrils formed by the action of procollagen proteinases. Thus, mast cell chymase, but not tryptase, exhibits procollagen peptidase-like activity as evidenced by its ability to process procollagen to fibril-forming collagen with concurrent formation of a unique carboxyl-terminal propeptide. These data demonstrate that mast cell chymase has a potential role in the regulation of collagen biosynthesis and in the pathogenesis of fibrosis.

Effect of monovalent anions on type I collagen fibrillogenesis in vitro

The effect of a set of monovalent anions with different preferential binding to proteins (C1-, Br-, I-, SCN-) on the kinetics of type I collagen fibrillogenesis was studied. Evidences obtained from turbidity-time curves and the Arrenhius plot suggested the presence of a conformational change prior to fibril formation, also supported by previous data available in the literature. A model of the initial steps of collagen assembly was proposed that could explain the action of the monovalent anions studied and other cosolvents on fibrillogenesis. Analysis of fibril width and 1-anilinonaphthalene-8-sulfonic acid (ANS) binding to collagen pointed to the presence of a nucleation process within the lag time.

Assembly in vitro of thin and thick fibrils of collagen II from recombinant procollagen II. The monomers in the tips of thick fibrils have the opposite orientation from monomers in the growing tips of collagen I fibrils

Human type II procollagen was prepared in a recombinant system and cleaved to pC-collagen II by procollagen N-proteinase. The pC-collagen II was then used as a substrate to generate collagen II fibrils by cleavage with procollagen C-proteinase at 37 degrees C. Electron microscopy of the fibrils demonstrated that, at the early stages of fibril assembly, very thin fibrils were formed. As the system approached equilibrium over 7-12 h, however, the thin fibrils were largely but not completely replaced by thick fibrils that had diameters of about 240 nm and a distinct D-period banding pattern. One typical fibril was photographed and analyzed in its entirety. The fibril was 776 D-periods (52 microM) long. It had a central shaft with a uniform diameter that was about 516 D-periods long and two tips of about 100 D-periods each. Most of the central shaft had a symmetrical banding pattern flanked by two transition regions of about 30 D-periods each. Measurements by scanning transmission electron microscopy demonstrated that the mass per unit length from the tips to the shafts increased linearly over approximately 100 D-periods from the fibril end. The linear increase in mass per unit length was consistent with previous observations for collagen I fibrils and established that the tips of collagen II also had a near paraboloidal shape. However, the orientation of monomers in the tips differed from the tips of collagen I fibrils in that the C termini instead of the N termini were directed toward the tips. The thin fibrils that were present at early stages of assembly and at equilibrium were comparable to the collagen II fibrils seen in embryonic tissues and probably represented intermediates on the pathway of thick fibrils formation. The results indicated that the molecular events in the self-assembly of collagen II fibrils are apparently similar to those in self-assembly of collagen I fibrils, but that there are also important differences in the structural information contained in collagen I and collagen II monomers.

Three-dimensional energy-minimized model of human type II "Smith" collagen microfibril

A procedure is described for constructing a three-dimensional model of fibril-forming human type II collagen based on the "Smith" microfibril model. This model is a complex of five individual collagen triple-helical molecules, and is based on known structural parameters for collagen. Both experimental and theoretical data were used as constraints to guide the modeling. The resulting fibril model for type II collagen is in agreement with both physical and chemical characteristics produced by experimental staining patterns of type II fibrils. Some advantages of the type II model are that the stereochemistry of all the sidechain groups is accounted for, and specific atomic interactions can now be studied. This model is useful for: development of therapeutics for collagen related diseases; development of synthetic collagen tissues; design of chemical reagents (i.e., tanning agents) to treat collagen-related products; and study of the structural and functional aspects of type II collagen. Described is the procedure by which the Smith microfibril of type II collagen was developed using molecular modeling tools, validation of the model by comparison to electron-microscopic images of fibril staining patterns, and some applications of this microfibril model.

In vitro formation and aggregation of heterotypic collagen I and III fibrils

In vitro fibrillogenesis of solutions containing pepsin digested and acid soluble collagens I and III from human and bovine skin were investigated by turbidity-time measurements, dark-field and electron microscopy. The maximum turbidity of these solutions exhibited inversely proportional dependence on the collagen III content. Self-assembly was accelerated by collagen III. As a measure of mass per unit length, the maximum turbidity shows a mean decrease of 88% when comparing the absorbance at 313 nm for 0% and 50% collagen III in a composite solution of acid extracted collagen. In contrast to these findings, the diameter of fibrils from acid extracted fetal calf skin with 50% collagen III, determined from electron micrographs, was only 23% smaller than for pure collagen I. Correspondence with investigations on in vitro fibrillogenesis with dark-field microscopy and electron microscopy, this phenomenon apparently derives from the bundling of fibrils. This may be interpreted to mean that bundling of fibrils is already suppressed at low collagen III concentrations. A comparison of acid and pepsin extracted fetal calf skin yielded similar behaviour of collagen I and III mixtures, even though the pepsin extract displayed a turbidity reduction that was about 25% less than the acid extract. For pepsin digested collagen from human and bovine skin, differences were found for maximum turbidity and the ability to form bundles decreasing with the biological age of the donor.

Heat shock increases cytosolic free Ca2+ concentration via Na(+)-Ca2+ exchange in human epidermoid A 431 cells

This study characterized cytosolic free Ca2+ concentration ([Ca2+]i) in normal and thermally injured human epidermoid A 431 cells. The resting [Ca2+]i in normal cells at 37 degrees C was 87 +/- 5 nM (n = 105). When cells were subjected to hyperthermia (40-50 degrees C), [Ca2+]i increased in a temperature- and time-dependent manner. The maximal increase in cells exposed to 45 degrees C was observed at 20 min; [Ca2+]i returned to normal within 1 h. The heat-induced [Ca2+]i increase depended on the presence of external Ca2+. La3+ and Cd2+ but not Co2+, verapamil, or nifedipine attenuated the heat-induced [Ca2+]i increase. TMB-8 partially blocked the increase in [Ca2+]i but pertussis toxin and cholera toxin pretreatment did not. The magnitude of the heat-induced [Ca2+]i increase or 45Ca2+ uptake depended on the presence of extracellular Na+. Heat treatment reduced the apparent Michaelis constant for external Ca2+ from 490 +/- 91 to 210 +/- 60 microM, whereas the maximal velocity remained the same. The intracellular Na+ concentration decreased 62.5% after heating. The heat-induced [Ca2+]i increase was completely blocked by amiloride (5 microM) and 5'-(N,N-dimethyl)-amiloride (1 microM). These results suggest heat activates the Na(+)-Ca2+ exchange system so as to increase [Ca2+]i and reduce [Na+]i.

An energetic evaluation of a "Smith" collagen microfibril model

An energy minimized three-dimensional structure of a collagen microfibril template was constructed based on the five-stranded model of Smith (1968), using molecular modeling methods and Kollman force fields (Weiner and Kollman, 1981). For this model, individual molecules were constructed with three identical polypeptide chains [Gly-Pro-Pro)n, (Gly-Prop-Hyp)n, or (Gly-Ala-Ala)n, where n = 4, 12, and 16) coiled into a right-handed triple-helical structure. The axial distance between adjacent amino acid residues is about 0.29 nm per polypeptide chain, and the pitch of each chain is approximately 3.3 residues. The microfibril model consists of five parallel triple helices packed so that a left-handed superhelical twist exists. The structural characteristics of the computed microfibril are consistent with those obtained for collagen by X-ray diffraction and electron microscopy. The energy minimized Smith microfibril model for (Gly-Pro-Pro)12 has an axial length of about 10.2 nm (for a 36 amino acid residue chain), which gives an estimated D-spacing (234 amino acids per chain) of approximately 66.2 nm. Studies of the microfibril models (Gly-Pro-Pro)12, (Gly-Pro-Hyp)12, and (Gly-Ala-Ala)12 show that nonbonded van der Waals interactions are important for microfibril formation, while electrostatic interactions contribute to the stability of the microfibril structure and determine the specificity by which collagen molecules pack within the microfibril.

Glutaraldehyde in collagen gel formation

The effect of glutaraldehyde (GTA) on the course of collagen gel formation was studied by measuring the absorbance against time. It was found that the t1/2 of fibril formation decreased with the addition of GTA and reached a minimum at a concentration of 6 microliters of GTA per g of collagen. For GTA concentrations, [GTA], above this value, t1/2 increased again and fibril formation was inhibited at concentrations of about 50-60 microliters of GTA per g of collagen. Thermal analysis showed that the denaturation temperature was the highest for the gels formed with [GTA] of 6 microliters/g, the transition peak also being the sharpest. At this [GTA], the compressive rigidity of the gels was also the highest. For low [GTA], above and below the optimum value, the fibrils formed had the normal collagen periodicity when observed in the electron microscope. This study shows that collagen gels which find applications as biomaterials can be effectively crosslinked at the gelation stage itself by the addition of low concentrations of GTA.