Degradation profiles of the poly(ε-caprolactone)/silk fibroin electrospinning membranes and their potential applications in tissue engineering

Degradation profiles are critical for the optimal application of electrospun polymer nanofibers in tissue regeneration, wound healing, and drug delivery systems. In this study, natural and synthetic polymers and their composites were subjected to in vivo transplantation and in vitro treatment with lipases, macrophages, and acetic acid to evaluate their degradation patterns. The effects of environmental stimulation, surface wettability, and polymer components on the degradation profiles of the electrospinning poly(ε-caprolactone)/silk fibroin (PCL/SF) nanofibers were first evaluated. In vivo degradation study demonstrated that bulk degradation, characterized by the transition from microfibers to nanofibers, and surface erosion, characterized by fusion between the microfibers or direct erosion from both ends of the microfibers, occurred in the electrospun membranes; however, bulk degradation dominated their overall degradation. Furthermore, the degradation rates of the electrospun PCL/SF membranes varied according to the composition, morphology, and surface wettability of the composite membranes. After the incorporation of silk fibroin (SF), the degradation rate of the SF/PCL composite membranes was faster, accompanied by larger values of weight loss and molecular weight (Mw) loss when compared with that of the pure poly(ε-caprolactone) (PCL) membrane, indicating a close relationship between degradation rate and hydrophilicity of the electrospinning membranes. The in vitro experimental results demonstrated that enzymes and oxidation partially resulted in the surface erosion of the PCL/SF microfibers. Consequently, bulk degradation and surface erosion coordinated with each other to enhance the hydrophilicity of the electrospinning membranes and accelerate the in vivo degradation.

Wettability Gradient-Induced Diode: MXene-Engineered Membrane for Passive-Evaporative Cooling

Thermoregulatory textiles, leveraging high-emissivity structural materials, have arisen as a promising candidate for personal cooling management; however, their advancement has been hindered by the underperformed water moisture transportation capacity, which impacts on their thermophysiological comfort. Herein, we designed a wettability-gradient-induced-diode (WGID) membrane achieving by MXene-engineered electrospun technology, which could facilitate heat dissipation and moisture-wicking transportation. As a result, the obtained WGID membrane could obtain a cooling temperature of 1.5 °C in the "dry" state, and 7.1 °C in the "wet" state, which was ascribed to its high emissivity of 96.40% in the MIR range, superior thermal conductivity of 0.3349 W m-1 K-1 (based on radiation- and conduction-controlled mechanisms), and unidirectional moisture transportation property. The proposed design offers an approach for meticulously engineering electrospun membranes with enhanced heat dissipation and moisture transportation, thereby paving the way for developing more efficient and comfortable thermoregulatory textiles in a high-humidity microenvironment.

Low cytotoxicity, antibacterial property, and curcumin delivery performance of toughness-enhanced electrospun composite membranes based on poly(lactic acid) and MAX phase (Ti3AlC2)

MXenes, synthesized from their precursor MAX phases, have been extensively researched as additives to enhance the drug delivery performance of polymer matrices, whereas there is a limited number of previous reports on the use of MAX phases themselves for such applications. The use of MAX phases can exclude the complicated synthesis procedure and lessen resultant production and environmental costs required to convert MAX phases to MXenes. Herein, electrospun membranes of poly(lactic acid) (PLA) and a MAX phase (Ti3AlC2) have been fabricated for curcumin delivery. The composite membrane exhibits significantly higher toughness (8.82 MJ m-3) than the plasticized PLA membrane (0.63 MJ m-3) with low cytotoxicity, supporting proliferation of mouse fibroblast L929 cells. The curcumin-loaded composite membrane exhibits high water vapor transmission (∼7350 g m-2 day-1), porosity (∼85 %), water wettability, and antibacterial properties against E. coli and S. aureus. Seven-day curcumin release is enhanced from 45 % (PLA) to 67 % (composite) due to curcumin diffusion from the polymer fibers and MAX phase surface that contributes to overall increased curcumin adsorption and release sites. This work demonstrates the potential of the MAX phase to enhance both properties and curcumin delivery, promising for other eco-friendly systems for sustainable drug delivery applications.

Development of biomimetic co-culture and tri-culture models to mimic the complex structure of the alveolar-capillary barrier

Alveoli are the functional area of respiratory system where the gaseous exchanges take place at level of the alveolar-capillary barrier. The development of safe and effective therapeutic approaches for treating lung disease is currently limited due to the lack of realistic preclinical models for their testing and validation. In this work, tissue engineering approaches were exploited to develop a biomimetic platform that provide an appropriate mimicking of the extracellular environment and the multicellular architecture of human alveoli. Here, we propose the implementation of two biomimetic in vitro models to reproduce the features of the main anatomic portions of the physiological alveolar-capillary barrier. First, a co-culture barrier model was obtained by integrating an electrospun polycaprolactone-gelatin (PCL-Gel) membrane in a modified transwell insert (PCL-Gel TW) to mimic the alveolar basement membrane (coded as thin model). Alveolar epithelial (A549) and lung microvascular endothelial (HULEC-5a) cells were cultured on the apical and basolateral side of the PCL-Gel membrane, respectively, under physiologic air-liquid interface (ALI) conditions for 7 days. The ALI condition promoted the expression of type I and type II alveolar epithelial cell markers and the secretion of mucus in A549 cells. Increased cell viability and barrier properties in co-cultures of A549 and HULEC-5a compared to mono-cultures revealed the effectiveness of the model to reproduce in vitro physiological-relevant features of the alveolar-capillary barrier. The second portion of the alveolar-capillary barrier was developed implementing a tri-culture model (coded as thick model) including a type I collagen (COLL) hydrogel formulated to host lung fibroblasts (MRC-5). The thick barrier model was implemented by seeding HULEC-5a on the basolateral side of PCL-Gel TW and then pouring sequentially MRC-5-laden COLL hydrogel and A549 cells on the apical side of the electrospun membrane. The thick model was maintained up to 7 days at ALI and immunofluorescence staining of tight and adherent junctions demonstrated the formation of a tight barrier. Lastly, the ability of models to emulate pathological inflammatory conditions was validated by exposing the apical compartment of the PCL-Gel TW to lipopolysaccharide (LPS). The damage of A549 tight junctions, the increase of barrier permeability and IL-6 pro-inflammatory cytokine release was observed after 48 h exposure to LPS.

Enhancing quorum quenching media with 3D robust electrospinning coating: A novel biofouling control strategy for membrane bioreactors

Bacterial quorum quenching (QQ) is an effective strategy for controlling biofouling in membrane bioreactor (MBR) by interfering the releasing and degradation of signal molecules during quorum sensing (QS) process. However, due to the framework feature of QQ media, the maintenance of QQ activity and the restriction of mass transfer threshold, it has been difficult to design a more stable and better performing structure in a long period of time. In this research, electrospun fiber coated hydrogel QQ beads (QQ-ECHB) were fabricated by using electrospun nanofiber coated hydrogel to strengthen layers of QQ carriers for the first time. The robust porous PVDF 3D nanofiber membrane was coated on the surface of millimeter-scale QQ hydrogel beads. Biocompatible hydrogel entrapping quorum quenching bacteria (sp.BH4) was employed as the core of the QQ-ECHB. In MBR with the addition of QQ-ECHB, the time to reach transmembrane pressure (TMP) of 40 kPa was 4 times longer than conventional MBR. The robust coating and porous microstructure of QQ-ECHB contributed to keeping a lasting QQ activity and stable physical washing effect at a very low dosage (10g beads/5L MBR). Physical stability and environmental-tolerance tests also verified that the carrier can maintain the structural strength and keep the core bacteria stable when suffering long-term cyclic compression and great fluctuations in sewage quality.

Insulin-like growth factor binding protein 4 loaded electrospun membrane ameliorating tendon injury by promoting retention of IGF-1

Tendon injury is one of the most common musculoskeletal disorders that impair joint mobility and lower quality of life. The limited regenerative capacity of tendon remains a clinical challenge. Local delivery of bioactive protein is a viable therapeutic approach for tendon healing. Insulin-like growth factor binding protein 4 (IGFBP-4) is a secreted protein capable of binding and stabilizing insulin-like growth factor 1 (IGF-1). Here, we applied an aqueous-aqueous freezing-induced phase separation technology to obtain the IGFBP4-encapsulated dextran particles. Then, we added the particles into poly (L-lactic acid) (PLLA) solution to fabricate IGFBP4-PLLA electrospun membrane for efficient IGFBP-4 delivery. The scaffold showed excellent cytocompatibility and a sustained release of IGFBP-4 for nearly 30 days. In cellular experiments, IGFBP-4 promoted tendon-related and proliferative markers expression. In a rat Achilles tendon injury model, immunohistochemistry and quantitative real-time polymerase chain reaction confirmed better outcomes by using the IGFBP4-PLLA electrospun membrane at the molecular level. Furthermore, the scaffold effectively promoted tendon healing in functional performance, ultrastructure and biomechanical properties. We found addition of IGFBP-4 promoted IGF-1 retention in tendon postoperatively and then facilitated protein synthesis via IGF-1/AKT signaling pathway. Overall, our IGFBP4-PLLA electrospun membrane provides a promising therapeutic strategy for tendon injury.

Electrospun nanofibrous poly(ether-block-amide) membrane for removing biogenic amines in acidic wastewater from the yellow rice wine factory

Compared with other techniques for wastewater treatment, adsorption offers an effective, economical and ecofriendly way to reduce the content of biogenic amines. Herein, the poly(ether-block-amide) (PEBA 2533) membranes were employed as the adsorbent to remove histamine, putrescine, cadaverine and tyramine in the synthetic and real wastewater from a local yellow rice wine factory. Electrospun PEBA membranes consisting of fine nanofibers were successfully obtained without the addition of surfactant for the first time. Characteristics of the prepared membranes were evaluated by their morphology, wetting behaviors and mechanical properties. Adsorption performance of the nanofibrous membrane was investigated in comparison to the dense membrane prepared by conventional casting. The fibrous membrane exhibited much higher adsorption rate over 10 times to the dense membrane along with 1.5 times more adsorption capacity towards the amines. In addition, the as-prepared membrane showed a promising reusability in the real wastewater treatment. The good balance of its chemical stability, adsorption capacity, selectivity, removal efficiency and reusability endows the electrospun membrane with an outstanding potential to be applied in the acidic wastewater treatment for the yellow rice wine industry.

Physico-mechanical and in-vivo evaluations of tri-layered alginate-gelatin/polycaprolactone-gelatin-β-TCP membranes for guided bone regeneration

Guided bone regeneration (GBR) membranes favor periodontal regrowth, but they still have certain limitations, such as improper biodegradation and poor mechanical property. To overcome these shortcomings, we have generated a unique multifunctional membrane. A polycaprolactone/gelatin/β-TCP and alginate/gelatin trilayered construction was fabricated through electrospinning and casting technology. The prepared membranes have suitable physicomechanical and in-vitro properties to confirm the compatibility of the product in the body. Phase analysis, functional groups, surface microstructure, and contact angle were measured as basic characteristics. For a mechanical performance evaluation, the tensile strength at suturing point was measured through pullout tensile strength test, and it showed the suture capability of bi-layered membranes. Highest tensile strength for A75G25 was recorded with 2.9 ± 0.15 MPa with 105% strain. Further, the osteoblast and fibroblast-type cell toxicity results showed that the electrospun membrane offered compatible environment to cells while the alginate sheet was found to be sufficiently capable to suppress the cellular attachment while also being a nontoxic material. Post-implantation, according to the in-vivo conclusions of the tri-layered membrane, there was appreciable bone formation. Compared to an implant without membrane covering, enhanced new bone formation can be identified after 8 weeks of implantation with P1G4β10 membranes-covered site.

Dual-responsive polyacrylonitrile-based electrospun membrane for controllable oil-water separation

Membrane separation based on smart materials with responsive wettability has attracted great attention due to the excellent performance of controllable oil-water separation. Herein, responsive copolymer originated from N-isopropylacrylamide and 2-(dimethylamino) ethyl methacrylate was synthesized and electrospun with polyacrylonitrile to fabricate smart composite membrane. The introduction of the responsive copolymer endowed the membrane with stimuli-responsive wettability to pH and temperature. Specifically, at the initial state, water was selectively blocked while oil passed through the membrane. After treatment with acidic water or CO₂, the reverse separation was realized due to the protonation of the tertiary amine group in the copolymer. Water was selectively passed through the membrane after heat treatment because of the structural change of membrane upon temperature. The developed membrane was able to separate different types of oil-water mixtures and surfactant-stabled emulsions with high efficiency. Additionally, two membranes controlled by temperature and pH were designed to construct a logic AND gate for oil-water separation, and the results demonstrated that only the temperature and acidity of the solution were simultaneously satisfied, the water could flow through the valve combination, and such capability made this smart membrane great potential for remotely controlling the oil-water separation process.

Development of stimulus-sensitive electrospun membranes based on novel biodegradable segmented polyurethane as triggered delivery system for doxorubicin

In this work, redox-sensitive polyurethane urea (PUU) based electrospun membranes have been exploited to chemically tether a pH-sensitive doxorubicin derivative achieved by linking a lipoyl hydrazide to the drug via a hydrazone linkage. First, the lipoyl-hydrazone-doxorubicin derivative labelled as LA-Hy-Doxo has been synthesized and characterized. Then, the molecule has been tethered, via a thiol-disulfide exchange reaction, to the redox-sensitive PUU (PolyCEGS) electrospun membrane. The redox-sensitive PolyCEGS PUU has been produced by using PCL-PEG-PCL polyol and glutathione-tetramethyl ester (GSSG-OMe)₄ as a chain extender. The LA-Hy-Doxo tethered electrospun membrane has showed a dually controlled release triggered by acidic and reducing conditions, producing a significant cytotoxic effect in human breast cancer cell lines (MCF-7) which has validated the system for the post-surgical treatment of solid tumors to contrast recurrence.

Boosting osteogenic potential and bone regeneration by co-cultured cell derived extracellular matrix incorporated porous electrospun scaffold

Implants for bone regeneration to remedy segmental bone defects, osteomyelitis, necrotic bone tissue and non-union fractures have worldwide appeal. Although biomaterials offer most of the advantages by improving tissue growth but developments are more commonly achieved via biologically derived molecules. To aid site specific bone tissue regeneration by synthetic scaffold, cell derived extracellular matrix (ECM) can be a crucial component. In this study, co-cultured bone marrow mesenchymal stem cell and osteoblastic cells derived ECM incorporated electrospun polycaprolactone (PCL) membranes were assessed for bone tissue engineering application. The preliminary experimental details indicated that, co-culture of cells supported enhanced in vitro ECM synthesis followed by successful deposition of osteoblastic ECM into electrospun membranes. The acellular samples revealed retention of ECM related biomacromolecules (collagen, glycosaminoglycan) and partial recovery of pores after decellularization. In vitro biocompatibility tests ensured improvement of proliferation and osteoblastic differentiation of MC3T3-E1 cells in decellularized ECM containing membrane (PCL-ECM) compared to bare membrane (PCL-B) which was further confirmed by osteogenic marker proteins expression analysis. The decellularized PCL-ECM membrane allowed great improvement of bone regeneration over the bare membrane (PCL-B) in 8 mm size critical sized rat skull defects at 2 months of post implantation. In short, the outcome of this study could be impactful in development and application of cell derived ECM based synthetic electrospun templates for bone tissue engineering application.[Formula: see text].

A pre-wetting induced superhydrophilic/superlipophilic micro-patterned electrospun membrane with self-cleaning property for on-demand emulsified oily wastewater separation

In this work, a pre-wetting induced superhydrophilic/superlipophilic micro-patterned membrane with surface-loaded BiVO₄ nanoparticles (Bi/PDA@PT) was successfully prepared by electrospinning and polydopamine (PDA) surface modification technology for highly efficient emulsified oily wastewater separation. The results showed that the as-prepared membranes exhibited micro hole-patterned structures and the BiVO₄ nanoparticles were uniformly deposited on the surfaces of fibers to construct hierarchical porous structures by using PDA as an adhesive polymeric bridge. During the separation process of emulsified oily wastewater, the hierarchical porous structures in membranes significantly improved the separation flux, which was nearly 2-3 times than that of the non-patterned membranes. Based on the existence of PDA, the membranes exhibited prewetting-induced superoleophobicity under water and superhydrophobicity under oil, which made it possible for them to separate both water-in-oil and oil-in-water emulsified oily wastewater selectively and efficiently. Moreover, the BiVO₄ nanoparticles loaded on the membranes could degrade the oily contaminants adsorbed on the membranes (nearly 100%) under visible light. All these attractive features demonstrate that the Bi/PDA@PT membranes show a great potential for sustainable and efficient emulsified oily wastewater separation.

Electrospun frogspawn structured membrane for gravity-driven oil-water separation

The aim of this study is to prepare a fibrous membrane scaffold that possesses a frogspawn structure for high-efficiency oil-water separation. Polyamic acid was first electrospun onto a rotating wheel-collector to obtain the fibrous membrane. Subsequently, post-processing by immersion in a polydimethylsiloxane solution and a silica nanoparticles suspension, followed by a thermal treatment generated a frogspawn-structured fibrous membrane. The obtained membrane achieved superhydrophobicity and superoleophilicity, with the water contact angle as high as 155.75° and the oil contact angle lower than 10°. The separation efficiencies of the membrane were higher than 99.55% and the permeate flux was maintained at greater than 4400 L/m²∙h after 20 separation cycles. Additionally, the wettability studies suggested the membrane exhibits high stability because it can resist damages due to high temperature (150 °C), acid/basic conditions and organic/inorganic solvents. These findings indicated that this composite membrane has great potential for use in gravity-driven oil-water separation and can extend the range of its application for treatments of oil spills incident, oily wastewater and spent liquor.

Combination therapy comprising irreversible electroporation and hydroxycamptothecin loaded electrospun membranes to treat rabbit VX2 subcutaneous cancer

Irreversible electroporation (IRE) is a kind of promising cancer treatment technology. However, local recurrence still occurs because of incomplete ablation. The aim of this study was to investigate the combined therapy of IRE and a hydroxycamptothecin loaded electrospun membrane (EM/HCPT) to treat rabbit VX2 subcutaneous cancer. HCPT loaded membranes were developed by electrospinning. Mechanical test and in vitro drug release study of EM/HCPT were performed. 24 rabbits with subcutaneous VX2 tumor were randomly divided into four groups: the control group, the EM/HCPT group, the IRE ablation group, and the IRE + EM/HCPT group. The tumor cells were ablated by IRE first, followed by subcutaneous implantation of EM/HCPT to release HCPT constantly in order to damage the residual cancer cells. The tumor inhibition efficacy was assessed by the tumor real-time monitoring, histological and immunofluorescent analyses, and transmission electron microscopy (TEM) examination. Assessment of the release from EM/HCPT showed that HCPT release lasted for about 7 days. The in vivo antitumor efficacy assessment, histological and immunofluorescent analyses, and TEM examination showed that IRE + EM/HCPT had the best tumor inhibition ability. In addition, the biochemical analyses and hematoxylin and eosin (H&E) staining of normal organs indicated that IRE + EM/HCPT treatment was safe. Our study provided a new concept in cancer treatment and might promote the application of IRE.

Phenol separation from phenol-laden saline wastewater by membrane aromatic recovery system-like membrane contactor using superhydrophobic/organophilic electrospun PDMS/PMMA membrane

Phenol recovery from phenol-laden saline wastewater plays an important role in the waste reclamation and pollution control. A membrane aromatic recovery system-like membrane contactor (MARS-like membrane contactor) was set up in this study using electrospun polydimethylsiloxane/polymethyl methacrylate (PDMS/PMMA) membrane with 0.0048 m² effective area to separate phenol from saline wastewater. Phenol and water contact angles of 0° and 162° were achieved on this membrane surface simultaneously, indicating its potential in the separation of phenol and water-soluble salt. Feed solution (500 mL) of 0.90 L/h and receiving solution (500 mL) of 1.26 L/h were investigated to be the optimum conditions for phenol separation, which corresponds to the employed Reynolds number of 14.6 and 20.5. During 108-h continuous separation for feed solution (2.0 g/L phenol, 10.0 g/L NaCl) under room temperature (20 °C), 42.6% of phenol was recycled in receiving solution with a salt rejection of 99.95%. Meanwhile, the mean phenol mass transfer coefficient (K_ov) was 6.7 × 10^-7 m s^-1. As a membrane-based process, though the permeated phenol increased with the increase of phenol concentration in feed solution, the phenol recovery ratio was determined by the membrane properties rather than the pollutant concentrations. Phenol was found to permeate this membrane via adsorption, diffusion and desorption, and therefore, the membrane fouling generated from pore blockage in other membrane separation processes was totally avoided.

Cellulose reinforced nylon-6 nanofibrous membrane: Fabrication strategies, physicochemical characterizations, wicking properties and biomimetic mineralization

The aim of the present study is to develop a facile, efficient approach to reinforce nylon 6 (N6) nanofibers with cellulose chains as well as to study the effect that cellulose regeneration has on the physicochemical properties of the composite fibers. Here, a cellulose acetate (CA) solution (17wt%) was prepared in formic acid and was blended with N6 solution (20%, prepared in formic acid and acetic acid) in various proportions, and the blended solutions were then electrospun to produce hybrid N6/CA nanofibers. Cellulose was regenerated in-situ in the fiber via alkaline saponification of the CA content of the hybrid fiber, leading to cellulose-reinforced N6 (N6/CL) nanofibers. Electron microscopy studies suggest that the fiber diameter and hence pore size gradually decreases as the mass composition of CA increases in the electrospinning solution. Cellulose regeneration showed noticeable change in the polymorphic behavior of N6, as observed in the XRD and IR spectra. The strong interaction of the hydroxyl group of cellulose with amide group of N6, mainly via hydrogen bonding, has a pronounced effect on the polymorphic behavior of N6. The γ-phase was dominant in pristine N6 and N6/CA fibers while α- phase was dominant in the N6/CL fibers. The surface wettability, wicking properties, and the tensile stress were greatly improved for N6/CL fibers compared to the corresponding N6/CA hybrid fibers. Results of DSC/TGA revealed that N6/CL fibers were more thermally stable than pristine N6 and N6/CA nanofibers. Furthermore, regeneration of cellulose chain improved the ability to nucleate bioactive calcium phosphate crystals in a simulated body fluid solution.