Fate of the DnaA initiator protein in replication at the origin of the Escherichia coli chromosome in vitro

Changing Perspectives on the Role of DnaA-ATP in Orisome Function and Timing Regulation

Bacteria, like all cells, must precisely duplicate their genomes before they divide. Regulation of this critical process focuses on forming a pre-replicative nucleoprotein complex, termed the orisome. Orisomes perform two essential mechanical tasks that configure the unique chromosomal replication origin, oriC to start a new round of chromosome replication: (1) unwinding origin DNA and (2) assisting with loading of the replicative DNA helicase on exposed single strands. In Escherichia coli, a necessary orisome component is the ATP-bound form of the bacterial initiator protein, DnaA. DnaA-ATP differs from DnaA-ADP in its ability to oligomerize into helical filaments, and in its ability to access a subset of low affinity recognition sites in the E. coli replication origin. The helical filaments have been proposed to play a role in both of the key mechanical tasks, but recent studies raise new questions about whether they are mandatory for orisome activity. It was recently shown that a version of E. coli oriC (oriC^allADP), whose multiple low affinity DnaA recognition sites bind DnaA-ATP and DnaA-ADP similarly, was fully occupied and unwound by DnaA-ADP in vitro, and in vivo suppressed the lethality of DnaA mutants defective in ATP binding and ATP-specific oligomerization. However, despite their functional equivalency, orisomes assembled on oriC^allADP were unable to trigger chromosome replication at the correct cell cycle time and displayed a hyper-initiation phenotype. Here we present a new perspective on DnaA-ATP, and suggest that in E. coli, DnaA-ATP is not required for mechanical functions, but rather is needed for site recognition and occupation, so that initiation timing is coupled to DnaA-ATP levels. We also discuss how other bacterial types may utilize DnaA-ATP and DnaA-ADP, and whether the high diversity of replication origins in the bacterial world reflects different regulatory strategies for how DnaA-ATP is used to control orisome assembly.

Blocking the Trigger: Inhibition of the Initiation of Bacterial Chromosome Replication as an Antimicrobial Strategy

All bacterial cells must duplicate their genomes prior to dividing into two identical daughter cells. Chromosome replication is triggered when a nucleoprotein complex, termed the orisome, assembles, unwinds the duplex DNA, and recruits the proteins required to establish new replication forks. Obviously, the initiation of chromosome replication is essential to bacterial reproduction, but this process is not inhibited by any of the currently-used antimicrobial agents. Given the urgent need for new antibiotics to combat drug-resistant bacteria, it is logical to evaluate whether or not unexploited bacterial processes, such as orisome assembly, should be more closely examined for sources of novel drug targets. This review will summarize current knowledge about the proteins required for bacterial chromosome initiation, as well as how orisomes assemble and are regulated. Based upon this information, we discuss current efforts and potential strategies and challenges for inhibiting this initiation pharmacologically.

Origin recognition is the predominant role for DnaA-ATP in initiation of chromosome replication

In all cells, initiation of chromosome replication depends on the activity of AAA+ initiator proteins that form complexes with replication origin DNA. In bacteria, the conserved, adenosine triphosphate (ATP)-regulated initiator protein, DnaA, forms a complex with the origin, oriC, that mediates DNA strand separation and recruitment of replication machinery. Complex assembly and origin activation requires DnaA-ATP, which differs from DnaA-ADP in its ability to cooperatively bind specific low affinity sites and also to oligomerize into helical filaments. The degree to which each of these activities contributes to the DnaA-ATP requirement for initiation is not known. In this study, we compared the DnaA-ATP dependence of initiation from wild-type Escherichia coli oriC and a synthetic origin (oriC^allADP), whose multiple low affinity DnaA sites bind DnaA-ATP and DnaA-ADP similarly. OriC^allADP was fully occupied and unwound by DnaA-ADP in vitro, and, in vivo, oriC^allADP suppressed lethality of DnaA mutants defective in ATP binding and ATP-specific oligomerization. However, loss of preferential DnaA-ATP binding caused over-initiation and increased sensitivity to replicative stress. The findings indicate both DnaA-ATP and DnaA-ADP can perform most of the mechanical functions needed for origin activation, and suggest that a key reason for ATP-regulation of DnaA is to control replication initiation frequency.

Low Affinity DnaA-ATP Recognition Sites in E. coli oriC Make Non-equivalent and Growth Rate-Dependent Contributions to the Regulated Timing of Chromosome Replication

Although the mechanisms that precisely time initiation of chromosome replication in bacteria remain unclear, most clock models are based on accumulation of the active initiator protein, DnaA-ATP. During each cell division cycle, sufficient DnaA-ATP must become available to interact with a distinct set of low affinity recognition sites in the unique chromosomal replication origin, oriC, and assemble the pre-replicative complex (orisome) that unwinds origin DNA and helps load the replicative helicase. The low affinity oriC-DnaA-ATP interactions are required for the orisome's mechanical functions, and may also play a role in timing of new rounds of DNA synthesis. To further examine this possibility, we constructed chromosomal oriCs with equal preference for DnaA-ADP or DnaA-ATP at one or more low affinity recognition sites, thereby lowering the DnaA-ATP requirement for orisome assembly, and measured the effect of the mutations on cell cycle timing of DNA synthesis. Under slow growth conditions, mutation of any one of the six low affinity DnaA-ATP sites in chromosomal oriC resulted in initiation earlier in the cell cycle, but the shift was not equivalent for every recognition site. Mutation of τ2 caused a greater change in initiation age, suggesting its occupation by DnaA-ATP is a temporal bottleneck during orisome assembly. In contrast, during rapid growth, all origins with a single mutated site displayed wild-type initiation timing. Based on these observations, we propose that E. coli uses two different, DnaA-ATP-dependent initiation timing mechanisms; a slow growth timer that is directly coupled to individual site occupation, and a fast growth timer comprising DnaA-ATP and additional factors that regulate DnaA access to oriC. Analysis of origins with paired mutated sites suggests that Fis is an important component of the fast growth timing mechanism.

DNA Methylation

The DNA of Escherichia coli contains 19,120 6-methyladenines and 12,045 5-methylcytosines in addition to the four regular bases, and these are formed by the postreplicative action of three DNA methyltransferases. The majority of the methylated bases are formed by the Dam and Dcm methyltransferases encoded by the dam (DNA adenine methyltransferase) and dcm (DNA cytosine methyltransferase) genes. Although not essential, Dam methylation is important for strand discrimination during the repair of replication errors, controlling the frequency of initiation of chromosome replication at oriC, and the regulation of transcription initiation at promoters containing GATC sequences. In contrast, there is no known function for Dcm methylation, although Dcm recognition sites constitute sequence motifs for Very Short Patch repair of T/G base mismatches. In certain bacteria (e.g., Vibrio cholerae, Caulobacter crescentus) adenine methylation is essential, and, in C. crescentus, it is important for temporal gene expression, which, in turn, is required for coordinating chromosome initiation, replication, and division. In practical terms, Dam and Dcm methylation can inhibit restriction enzyme cleavage, decrease transformation frequency in certain bacteria, and decrease the stability of short direct repeats and are necessary for site-directed mutagenesis and to probe eukaryotic structure and function.

Initiation of DNA Replication

In recent years it has become clear that complex regulatory circuits control the initiation step of DNA replication by directing the assembly of a multicomponent molecular machine (the orisome) that separates DNA strands and loads replicative helicase at oriC, the unique chromosomal origin of replication. This chapter discusses recent efforts to understand the regulated protein-DNA interactions that are responsible for properly timed initiation of chromosome replication. It reviews information about newly identified nucleotide sequence features within Escherichia coli oriC and the new structural and biochemical attributes of the bacterial initiator protein DnaA. It also discusses the coordinated mechanisms that prevent improperly timed DNA replication. Identification of the genes that encoded the initiators came from studies on temperature-sensitive, conditional-lethal mutants of E. coli, in which two DNA replication-defective phenotypes, "immediate stop" mutants and "delayed stop" mutants, were identified. The kinetics of the delayed stop mutants suggested that the defective gene products were required specifically for the initiation step of DNA synthesis, and subsequently, two genes, dnaA and dnaC, were identified. The DnaA protein is the bacterial initiator, and in E. coli, the DnaC protein is required to load replicative helicase. Regulation of DnaA accessibility to oriC, the ordered assembly and disassembly of a multi-DnaA complex at oriC, and the means by which DnaA unwinds oriC remain important questions to be answered and the chapter discusses the current state of knowledge on these topics.

The Arg Fingers of Key DnaA Protomers Are Oriented Inward within the Replication Origin oriC and Stimulate DnaA Subcomplexes in the Initiation Complex

ATP-DnaA binds to multiple DnaA boxes in the Escherichia coli replication origin (oriC) and forms left-half and right-half subcomplexes that promote DNA unwinding and DnaB helicase loading. DnaA forms homo-oligomers in a head-to-tail manner via interactions between the bound ATP and Arg-285 of the adjacent protomer. DnaA boxes R1 and R4 reside at the outer edges of the DnaA-binding region and have opposite orientations. In this study, roles for the protomers bound at R1 and R4 were elucidated using chimeric DnaA molecules that had alternative DNA binding sequence specificity and chimeric oriC molecules bearing the alternative DnaA binding sequence at R1 or R4. In vitro, protomers at R1 and R4 promoted initiation regardless of whether the bound nucleotide was ADP or ATP. Arg-285 was shown to play an important role in the formation of subcomplexes that were active in oriC unwinding and DnaB loading. The results of in vivo analysis using the chimeric molecules were consistent with the in vitro data. Taken together, the data suggest a model in which DnaA subcomplexes form in symmetrically opposed orientations and in which the Arg-285 fingers face inward to mediate interactions with adjacent protomers. This mode is consistent with initiation regulation by ATP-DnaA and bidirectional loading of DnaB helicases.

The orisome: structure and function

During the cell division cycle of all bacteria, DNA-protein complexes termed orisomes trigger the onset of chromosome duplication. Orisome assembly is both staged and stringently regulated to ensure that DNA synthesis begins at a precise time and only once at each origin per cycle. Orisomes comprise multiple copies of the initiator protein DnaA, which oligomerizes after interacting with specifically positioned recognition sites in the unique chromosomal replication origin, oriC. Since DnaA is highly conserved, it is logical to expect that all bacterial orisomes will share fundamental attributes. Indeed, although mechanistic details remain to be determined, all bacterial orisomes are capable of unwinding oriC DNA and assisting with loading of DNA helicase onto the single-strands. However, comparative analysis of oriCs reveals that the arrangement and number of DnaA recognition sites is surprisingly variable among bacterial types, suggesting there are many paths to produce functional orisome complexes. Fundamental questions exist about why these different paths exist and which features of orisomes must be shared among diverse bacterial types. In this review we present the current understanding of orisome assembly and function in Escherichia coli and compare the replication origins among the related members of the Gammaproteobacteria. From this information we propose that the diversity in orisome assembly reflects both the requirement to regulate the conformation of origin DNA as well as to provide an appropriate cell cycle timing mechanism that reflects the lifestyle of the bacteria. We suggest that identification of shared steps in orisome assembly may reveal particularly good targets for new antibiotics.

I came to a fork in the DNA and there was RecG

RecG is a potent, atypical, monomeric DNA helicase. It simultaneously couples ATP hydrolysis to duplex unwinding and rewinding, and to the displacement of proteins bound to the DNA. A model is presented for the localization of the enzyme to the inner membrane via its binding to SSB. Upon fork stalling, SSB targets the enzyme to the fork where it can act. RecG displays a strong preference for processing the fork in the regression direction, that is, away from the site of damage that initially led to fork arrest. Regression is mediated by strong binding of the wedge domain to the fork arms as well as to parental duplex DNA by the helicase domains. Once RecG has regressed the fork, it will dissociate leaving the now relaxed, Holliday junction-like DNA, available for further processing by enzymes such as RuvAB.

DNA replication at the single-molecule level

A cell can be thought of as a highly sophisticated micro factory: in a pool of billions of molecules - metabolites, structural proteins, enzymes, oligonucleotides - multi-subunit complexes assemble to perform a large number of basic cellular tasks, such as DNA replication, RNA/protein synthesis or intracellular transport. By purifying single components and using them to reconstitute molecular processes in a test tube, researchers have gathered crucial knowledge about mechanistic, dynamic and structural properties of biochemical pathways. However, to sort this information into an accurate cellular road map, we need to understand reactions in their relevant context within the cellular hierarchy, which is at the individual molecule level within a crowded, cellular environment. Reactions occur in a stochastic fashion, have short-lived and not necessarily well-defined intermediates, and dynamically form functional entities. With the use of single-molecule techniques these steps can be followed and detailed kinetic information that otherwise would be hidden in ensemble averaging can be obtained. One of the first complex cellular tasks that have been studied at the single-molecule level is the replication of DNA. The replisome, the multi-protein machinery responsible for copying DNA, is built from a large number of proteins that function together in an intricate and efficient fashion allowing the complex to tolerate DNA damage, roadblocks or fluctuations in subunit concentration. In this review, we summarize advances in single-molecule studies, both in vitro and in vivo, that have contributed to our current knowledge of the mechanistic principles underlying DNA replication.

Mutant DnaAs of Escherichia coli that are refractory to negative control

DnaA is the initiator of DNA replication in bacteria. A mutant DnaA named DnaAcos is unusual because it is refractory to negative regulation. We developed a genetic method to isolate other mutant DnaAs that circumvent regulation to extend our understanding of mechanisms that control replication initiation. Like DnaAcos, one mutant bearing a tyrosine substitution for histidine 202 (H202Y) withstands the regulation exerted by datA, hda and dnaN (β clamp), and both DnaAcos and H202Y resist inhibition by the Hda-β clamp complex in vitro. Other mutant DnaAs carrying G79D, E244K, V303M or E445K substitutions are either only partially sensitive or refractory to inhibition by the Hda-β clamp complex in vitro but are responsive to hda expression in vivo. All mutant DnaAs remain able to interact directly with Hda. Of interest, both DnaAcos and DnaAE244K bind more avidly to Hda. These mutants, by sequestrating Hda, may limit its availability to regulate other DnaA molecules, which remain active to induce extra rounds of DNA replication. Other evidence suggests that a mutant bearing a V292M substitution hyperinitiates by escaping the effect of an unknown regulatory factor. Together, our results provide new insight into the mechanisms that regulate replication initiation in Escherichia coli.

Differentiation of the DnaA-oriC subcomplex for DNA unwinding in a replication initiation complex

In Escherichia coli, ATP-DnaA multimers formed on the replication origin oriC promote duplex unwinding, which leads to helicase loading. Based on a detailed functional analysis of the oriC sequence motifs, we previously proposed that the left half of oriC forms an ATP-DnaA subcomplex competent for oriC unwinding, whereas the right half of oriC forms a distinct ATP-DnaA subcomplex that facilitates helicase loading. However, the molecular basis for the functional difference between these ATP-DnaA subcomplexes remains unclear. By analyzing a series of novel DnaA mutants, we found that structurally distinct DnaA multimers form on each half of oriC. DnaA AAA+ domain residues Arg-227 and Leu-290 are specifically required for oriC unwinding. Notably, these residues are required for the ATP-DnaA-specific structure of DnaA multimers in complex with the left half of oriC but not for that with the right half. These results support the idea that the ATP-DnaA multimers formed on oriC are not uniform and that they can adopt different conformations. Based on a structural model, we propose that Arg-227 and Leu-290 play a crucial role in inter-ATP-DnaA interaction and are a prerequisite for the formation of unwinding-competent DnaA subcomplexes on the left half of oriC. These residues are not required for the interaction with DnaB, nucleotide binding, or regulatory DnaA-ATP hydrolysis, which further supports their important role in inter-DnaA interaction. The corresponding residues are evolutionarily conserved and are required for unwinding in the initial complexes of Thermotoga maritima, an ancient hyperthermophile. Therefore, our findings suggest a novel and common mechanism for ATP-DnaA-dependent activation of initial complexes.

Regulation of DnaA assembly and activity: taking directions from the genome

To ensure proper timing of chromosome duplication during the cell cycle, bacteria must carefully regulate the activity of initiator protein DnaA and its interactions with the unique replication origin oriC. Although several protein regulators of DnaA are known, recent evidence suggests that DnaA recognition sites, in multiple genomic locations, also play an important role in controlling assembly of pre-replicative complexes. In oriC, closely spaced high- and low-affinity recognition sites direct DnaA-DnaA interactions and couple complex assembly to the availability of active DnaA-ATP. Additional recognition sites at loci distant from oriC modulate DnaA-ATP availability by repressing new synthesis, recharging inactive DnaA-ADP, or titrating DnaA. Relying on genomic DnaA binding sites, as well as protein regulators, to control DnaA function appears to provide the best combination of high precision and dynamic regulation necessary to couple DNA replication with cell growth over a range of nutritional conditions.

Highly organized DnaA-oriC complexes recruit the single-stranded DNA for replication initiation

In Escherichia coli, the replication origin oriC consists of two functional regions: the duplex unwinding element (DUE) and its flanking DnaA-assembly region (DAR). ATP-DnaA molecules multimerize on DAR, unwinding DUE for DnaB helicase loading. However, DUE-unwinding mechanisms and functional structures in DnaA–oriC complexes supporting those remain unclear. Here, using various in vitro reconstituted systems, we identify functionally distinct DnaA sub-complexes formed on DAR and reveal novel mechanisms in DUE unwinding. The DUE-flanking left-half DAR carrying high-affinity DnaA box R1 and the ATP-DnaA-preferential DnaA box R5, τ1-2 and I1-2 sites formed a DnaA sub-complex competent in DUE unwinding and ssDUE binding, thereby supporting basal DnaB loading activity. This sub-complex is further subdivided into two; the DUE-distal DnaA sub-complex formed on the ATP–DnaA-preferential sites binds ssDUE. Notably, the DUE-flanking, DnaA box R1–DnaA sub-complex recruits DUE to the DUE-distal DnaA sub-complex in concert with a DNA-bending nucleoid protein IHF, thereby promoting DUE unwinding and binding of ssDUE. The right-half DAR–DnaA sub-complex stimulated DnaB loading, consistent with in vivo analyses. Similar features are seen in DUE unwinding of the hyperthermophile, Thermotoga maritima, indicating evolutional conservation of those mechanisms.

Two oppositely oriented arrays of low-affinity recognition sites in oriC guide progressive binding of DnaA during Escherichia coli pre-RC assembly

The onset of chromosomal DNA replication requires highly precise and reproducible interactions between initiator proteins and replication origins to assemble a pre-replicative complex (pre-RC) that unwinds the DNA duplex. In bacteria, initiator protein DnaA, bound to specific high- and low-affinity recognition sites within the unique oriC locus, comprises the pre-RC, but how complex assembly is choreographed to ensure precise initiation timing during the cell cycle is not well understood. In this study, we present evidence that higher-order DnaA structures are formed at oriC when DnaA monomers are closely positioned on the same face of the DNA helix by interaction with two oppositely oriented essential arrays of closely spaced low-affinity DnaA binding sites. As DnaA levels increase, peripheral high-affinity anchor sites begin cooperative loading of the arrays, which is extended by sequential binding of additional DnaA monomers resulting in growth of the complexes towards the centre of oriC. We suggest that this polarized assembly of unique DnaA oligomers within oriC plays an important role in mediating pre-RC activity and may be a feature found in all bacterial replication origins.

Suppressors of DnaA(ATP) imposed overinitiation in Escherichia coli

Chromosome replication in Escherichia coli is limited by the supply of DnaA associated with ATP. Cells deficient in RIDA (Regulatory Inactivation of DnaA) due to a deletion of the hda gene accumulate suppressor mutations (hsm) to counteract the overinitiation caused by an elevated DnaA(ATP) level. Eight spontaneous hda suppressor mutations were identified by whole-genome sequencing, and three of these were analysed further. Two mutations (hsm-2 and hsm-4) mapped in the dnaA gene and led to a reduced ability to initiate replication from oriC. One mutation (hsm-1) mapped to the seqA promoter and increased the SeqA protein level in the cell. hsm-1 cells had prolonged origin sequestration, reduced DnaA protein level and reduced DnaA-Reactivating Sequence (DARS)-mediated rejuvenation of DnaA(ADP) to DnaA(ATP) , all of which could contribute to the suppression of RIDA deficiency. Despite of these defects hsm-1 cells were quite similar to wild type with respect to cell cycle parameters. We speculate that since SeqA binding sites might overlap with DnaA binding sites spread throughout the chromosome, excess SeqA could interfere with DnaA titration and thereby increase free DnaA level. Thus, in spite of reduction in total DnaA, the amount of DnaA molecules available for initiation may not be reduced.

DNA Methylation

The DNA of Escherichia coli contains 19,120 6-methyladenines and 12,045 5-methylcytosines in addition to the four regular bases, and these are formed by the postreplicative action of three DNA methyltransferases. The majority of the methylated bases are formed by the Dam and Dcmmethyltransferases encoded by the dam (DNA adenine methyltransferase) and dcm (DNA cytosine methyltransferase) genes. Although not essential, Dam methylation is important for strand discrimination during repair of replication errors, controlling the frequency of initiation of chromosome replication at oriC, and regulation of transcription initiation at promoters containing GATC sequences. In contrast, there is no known function for Dcm methylation, although Dcm recognition sites constitute sequence motifs for Very Short Patch repair of T/G base mismatches. In certain bacteria (e.g., Vibrio cholera and Caulobactercrescentus) adenine methylation is essential, and in C.crescentus it is important for temporal gene expression which, in turn, is required for coordination of chromosome initiation, replication, and division. In practical terms, Dam and Dcm methylation can inhibit restriction enzyme cleavage,decrease transformation frequency in certain bacteria,and decrease the stability of short direct repeats andare necessary for site-directed mutagenesis and to probe eukaryotic structure and function.

Loss of Hda activity stimulates replication initiation from I-box, but not R4 mutant origins in Escherichia coli

Initiation of chromosome replication in Escherichia coli is limited by the initiator protein DnaA associated with ATP. Within the replication origin, binding sites for DnaA associated with ATP or ADP (R boxes) and the DnaA(ATP) specific sites (I-boxes, tau-boxes and 6-mer sites) are found. We analysed chromosome replication of cells carrying mutations in conserved regions of oriC. Cells carrying mutations in DnaA-boxes I2, I3, R2, R3 and R5 as well as FIS and IHF binding sites resembled wild-type cells with respect to origin concentration. Initiation of replication in these mutants occurred in synchrony or with slight asynchrony only. Furthermore, lack of Hda stimulated initiation in all these mutants. The DnaA(ATP) containing complex that leads to initiation can therefore be formed in the absence of several of the origin DnaA binding sites including both DnaA(ATP) specific I-boxes. However, competition between I-box mutant and wild-type origins, revealed a positive role of I-boxes on initiation. On the other hand, mutations affecting DnaA-box R4 were found to be compromised for initiation and could not be augmented by an increase in cellular DnaA(ATP)/DnaA(ADP) ratio. Compared with the sites tested here, R4 therefore seems to contribute to initiation most critically.

SpoT regulates DnaA stability and initiation of DNA replication in carbon-starved Caulobacter crescentus

Cell cycle progression and polar differentiation are temporally coordinated in Caulobacter crescentus. This oligotrophic bacterium divides asymmetrically to produce a motile swarmer cell that represses DNA replication and a sessile stalked cell that replicates its DNA. The initiation of DNA replication coincides with the proteolysis of the CtrA replication inhibitor and the accumulation of DnaA, the replication initiator, upon differentiation of the swarmer cell into a stalked cell. We analyzed the adaptive response of C. crescentus swarmer cells to carbon starvation and found that there was a block in both the swarmer-to-stalked cell polar differentiation program and the initiation of DNA replication. SpoT is a bifunctional synthase/hydrolase that controls the steady-state level of the stress-signaling nucleotide (p)ppGpp, and carbon starvation caused a SpoT-dependent increase in (p)ppGpp concentration. Carbon starvation activates DnaA proteolysis (B. Gorbatyuk and G. T. Marczynski, Mol. Microbiol. 55:1233-1245, 2005). We observed that SpoT is required for this phenomenon in swarmer cells, and in the absence of SpoT, carbon-starved swarmer cells inappropriately initiated DNA replication. Since SpoT controls (p)ppGpp abundance, we propose that this nucleotide relays carbon starvation signals to the cellular factors responsible for activating DnaA proteolysis, thereby inhibiting the initiation of DNA replication. SpoT, however, was not required for the carbon starvation block of the swarmer-to-stalked cell polar differentiation program. Thus, swarmer cells utilize at least two independent signaling pathways to relay carbon starvation signals: a SpoT-dependent pathway mediating the inhibition of DNA replication initiation, and a SpoT-independent pathway(s) that blocks morphological differentiation.

A common mechanism for the ATP-DnaA-dependent formation of open complexes at the replication origin

Initiation of chromosomal replication and its cell cycle-coordinated regulation bear crucial and fundamental mechanisms in most cellular organisms. Escherichia coli DnaA protein forms a homomultimeric complex with the replication origin (oriC). ATP-DnaA multimers unwind the duplex within the oriC unwinding element (DUE). In this study, structural analyses suggested that several residues exposed in the central pore of the putative structure of DnaA multimers could be important for unwinding. Using mutation analyses, we found that, of these candidate residues, DnaA Val-211 and Arg-245 are prerequisites for initiation in vivo and in vitro. Whereas DnaA V211A and R245A proteins retained normal affinities for ATP/ADP and DNA and activity for the ATP-specific conformational change of the initiation complex in vitro, oriC complexes of these mutant proteins were inactive in DUE unwinding and in binding to the single-stranded DUE. Unlike oriC complexes including ADP-DnaA or the mutant DnaA, ATP-DnaA-oriC complexes specifically bound the upper strand of single-stranded DUE. Specific T-rich sequences within the strand were required for binding. The corresponding conserved residues of the DnaA ortholog in Thermotoga maritima, an ancient eubacterium, were also required for DUE unwinding, consistent with the idea that the mechanism and regulation for DUE unwinding can be evolutionarily conserved. These findings provide novel insights into mechanisms for pore-mediated origin unwinding, ATP/ADP-dependent regulation, and helicase loading of the initiation complex.

Mutational analysis reveals Escherichia coli oriC interacts with both DnaA-ATP and DnaA-ADP during pre-RC assembly

Prior to initiating DNA synthesis, Escherichia coli oriC switches from ORC, comprising initiator DnaA bound at three high-affinity sites, to pre-RC, when additional DnaA molecules interact with low-affinity sites. Two types of low-affinity sites exist: R boxes that bind DnaA-ATP and DnaA-ADP with equal affinity, and I-sites with a three- to fourfold preference for DnaA-ATP. To assess the regulatory role of weak DnaA interactions during pre-RC assembly in vivo, we compared the behaviour of plasmid-borne wild-type oriC with mutants having an increased or decreased number of DnaA-ATP discriminatory I-sites. Increasing the number of discriminatory sites by replacing R5M with I2 inactivated extrachromosomal oriC function. Mutants with no discriminatory sites perturbed host growth and rapidly replaced wild-type chromosomal oriC, but normal function returned if one I-site was restored at either the I2, I3 or R5M position. These observations are consistent with assembly of E. coli pre-RC in vivo from mixtures of DnaA-ATP and DnaA-ADP, with I-site interactions coupling pre-RC assembly to DnaA-ATP levels.

DnaA: controlling the initiation of bacterial DNA replication and more

Escherichia coli is a model system to study the mechanism of DNA replication and its regulation during the cell cycle. One regulatory pathway ensures that initiation of DNA replication from the chromosomal origin, oriC, is synchronous and occurs at the proper time in the bacterial cell cycle. A major player in this pathway is SeqA protein and involves its ability to bind preferentially to oriC when it is hemi-methylated. The second pathway modulates DnaA activity by stimulating the hydrolysis of ATP bound to DnaA protein. The regulatory inactivation of DnaA function involves an interaction with Hda protein and the beta dimer, which functions as a sliding clamp for the replicase, DNA polymerase III holoenzyme. The datA locus represents a third mechanism, which appears to influence the availability of DnaA protein in supporting rifampicin-resistant initiations.

Hda-mediated inactivation of the DnaA protein and dnaA gene autoregulation act in concert to ensure homeostatic maintenance of the Escherichia coli chromosome

Initiation of DNA replication in Eschericia coli requires the ATP-bound form of the DnaA protein. The conversion of DnaA-ATP to DnaA-ADP is facilitated by a complex of DnaA, Hda (homologous to DnaA), and DNA-loaded beta-clamp proteins in a process termed RIDA (regulatory inactivation of DnaA). Hda-deficient cells initiate replication at each origin mainly once per cell cycle, and the rare reinitiation events never coincide with the end of the origin sequestration period. Therefore, RIDA is not the predominant mechanism to prevent immediate reinitiation from oriC. The cellular level of Hda correlated directly with dnaA gene expression such that Hda deficiency led to reduced dnaA gene expression, and overproduction of Hda led to DnaA overproduction. Hda-deficient cells were very sensitive to variations in the cellular level of DnaA, and DnaA overproduction led to uncontrolled initiation of replication from oriC, causing severe growth retardation or cell death. Based on these observations, we propose that both RIDA and dnaA gene autoregulation are required as homeostatic mechanisms to ensure that initiation of replication occurs at the same time relative to cell mass in each cell cycle.

Assembly of a double hexameric helicase

Viral initiators perform multiple functions in initiation of DNA replication including ori binding, melting, and unwinding, culminating in the formation of a double hexameric (DH) helicase. We have recapitulated the assembly of the papillomavirus E1 initiator DH helicase, providing the first description of how such a complex is formed. We have identified an intermediate, a double trimer (DT), which relies on two cooperating DNA binding activities to melt double-stranded DNA and generate a substrate for formation of the DH helicase. The formation of the DT is dependent on nucleotide binding, while formation of the DH also requires hydrolysable ATP. The DNA binding properties of the DT explain how E1, which binds to DNA as a dimer, can effect a transition to ring structures, such as the double hexamer. These results provide new insight into the intricate machinery that initiates DNA replication.

Formation of an ATP-DnaA-specific initiation complex requires DnaA Arginine 285, a conserved motif in the AAA+ protein family

Escherichia coli DnaA protein, a member of the AAA+ superfamily, initiates replication from the chromosomal origin oriC in an ATP-dependent manner. Nucleoprotein complex formed on oriC with the ATP-DnaA multimer but not the ADP-DnaA multimer is competent to unwind the oriC duplex. The oriC region contains ATP-DnaA-specific binding sites termed I2 and I3, which stimulate ATP-DnaA-dependent oriC unwinding. In this study, we show that the DnaA R285A mutant is inactive for oriC replication in vivo and in vitro and that the mutation is associated with specific defects in oriC unwinding. In contrast, activities of DnaA R285A are sustained in binding to the typical DnaA boxes and to ATP and ADP, formation of multimeric complexes on oriC, and loading of the DnaB helicase onto single-stranded DNA. Footprint analysis of the DnaA-oriC complex reveals that the ATP form of DnaA R285A does not interact with ATP-DnaA-specific binding sites such as the I sites. A subgroup of DnaA molecules in the oriC complex must contain the Arg-285 residue for initiation. Sequence and structural analyses suggest that the DnaA Arg-285 residue is an arginine finger, an AAA+ family-specific motif that recognizes ATP bound to an adjacent subunit in a multimeric complex. In the context of these and previous results, the DnaA Arg-285 residue is proposed to play a unique role in the ATP-dependent conformational activation of an initial complex by recognizing ATP bound to DnaA and by modulating the structure of the DnaA multimer to allow interaction with ATP-DnaA-specific binding sites in the complex.

Building a bacterial orisome: emergence of new regulatory features for replication origin unwinding

Triggering new rounds of chromosomal DNA replication during the bacterial cell cycle is exquisitely regulated, ensuring both proper timing and one round per cycle stringency. A critical first step is stable unwinding of oriC, the chromosomal replication origin, by multiprotein orisome complexes comprising the AAA+ initiator DnaA and modulator proteins that bend DNA. Recently identified oriC-DnaA interactions in Escherichia coli raise important questions regarding the molecular mechanisms that regulate origin unwinding in bacteria. We describe staged binding of E. coli origin recognition proteins and suggest an unwinding switch based on interactions between DnaA-ATP and specialized oriC sites that must be filled during orisome assembly. By focusing multiple regulatory pathways on only a few key oriC DNA-protein interactions, this model includes an efficient way to control unwinding followed by orisome inactivation during the cell cycle. Future studies will determine whether this regulatory scheme is correct and whether it is generally applicable to other bacterial types.

Host controlled plasmid replication: Escherichia coli minichromosomes

Escherichia coli minichromosomes are plasmids replicating exclusively from a cloned copy of oriC, the chromosomal origin of replication. They are therefore subject to the same types of replication control as imposed on the chromosome. Unlike natural plasmid replicons, minichromosomes do not adjust their replication rate to the cellular copy number and they do not contain information for active partitioning at cell division. Analysis of mutant strains where minichromosomes cannot be established suggest that their mere existence is dependent on the factors that ensure timely once per cell cycle initiation of replication. These observations indicate that replication initiation in E. coli is normally controlled in such a way that all copies of oriC contained within the cell, chromosomal and minichromosomal, are initiated within a fairly short time interval of the cell cycle. Furthermore, both replication and segregation of the bacterial chromosome seem to be controlled by sequences outside the origin itself.

Two discriminatory binding sites in the Escherichia coli replication origin are required for DNA strand opening by initiator DnaA-ATP

Initiation of DNA replication in eukaryotes, archea, and eubacteria requires interaction of structurally conserved ATP-binding initiator proteins and origin DNA to mediate assembly of replisomes. However, the specific requirement for ATP in the early steps of initiation remains unclear. This is true even for the well studied Escherichia coli replication origin, oriC, where the ATP form of initiator DnaA is necessary and sufficient for initial DNA strand separation, but the five DnaA-binding sites (R boxes) with consensus sequence 5'TGTGNAT/AAA bind both active ATP-DnaA and inactive ADP-DnaA with equal affinity. By using dimethyl sulfate footprinting, we recently identified two initiator-binding sites, I2 and I3, with sequence 5'TG/TGGATCAG/A. We now show that sites I2 and I3 preferentially bind DnaA-ATP and are required for origin unwinding. Guanine at position 3 determines DnaA-ATP preference, and changing this base to thymine at both I sites allows DnaA-ADP to bind and open oriC, although DNA strand separation is not precisely localized in the AT-rich region. These observations indicate that specific initiator binding sites within a replication origin can be important determinants of an ATP-dependent molecular switch regulating DNA strand separation.

Escherichia coli DnaA protein--phospholipid interactions: in vitro and in vivo

DNA replication in Escherichia coli is controlled at the initiation stage, possibly by regulation of the essential activity of DnaA protein. The cellular membrane has long been hypothesized to be involved in chromosomal replication. Accumulating evidence, both in vitro and in vivo, that supports the importance of membrane phospholipids influencing the initiation activity of DnaA is reviewed.

Identification of the chromosomal replication origin from Thermus thermophilus and its interaction with the replication initiator DnaA

The chromosomal replication origin oriC and the gene encoding the replication initiator protein DnaA from Thermus thermophilus have been identified and cloned into an Escherichia coli vector system. The replication origin is composed of 13 characteristically arranged DnaA boxes, binding sites for the DnaA protein, and an AT-rich stretch, followed by the dnaN gene. The dnaA gene is located upstream of the origin and expresses a typical DnaA protein that follows the division into four domains, as with other members of the DnaA protein family. Here, we report the purification of Thermus-DnaA (Tth-DnaA) and characterize the interaction of the purified protein with the replication origin, with regard to the binding kinetics and stoichiometry of this interaction. Using gel retardation assays, surface plasmon resonance (SPR) and electron microscopy, we show that, unlike the E. coli DnaA, Tth-DnaA does not recognize a single DnaA box, instead a cluster of three tandemly repeated DnaA boxes is the minimal requirement for specific binding. The highest binding affinities are observed with full-length oriC or six clustered, tandemly repeated DnaA boxes. Furthermore, high-affinity DNA-binding of Tth-DnaA is dependent on the presence of ATP. The Thermus DnaA/oriC interaction will be compared with oriC complex formation generated by other DnaA proteins.

DnaA, the initiator of Escherichia coli chromosomal replication, is located at the cell membrane

Given the lack of a nucleus in prokaryotic cells, the significance of spatial organization in bacterial chromosome replication is only beginning to be fully appreciated. DnaA protein, the initiator of chromosomal replication in Escherichia coli, is purified as a soluble protein, and in vitro it efficiently initiates replication of minichromosomes in membrane-free DNA synthesis reactions. However, its conversion from a replicatively inactive to an active form in vitro occurs through its association with acidic phospholipids in a lipid bilayer. To determine whether the in situ residence of DnaA protein is cytoplasmic, membrane associated, or both, we examined the cellular location of DnaA using immunogold cryothin-section electron microscopy and immunofluorescence. Both of these methods revealed that DnaA is localized at the cell membrane, further suggesting that initiation of chromosomal replication in E. coli is a membrane-affiliated event.

Role of adenine nucleotides, molecular chaperones and chaperonins in stabilization of DnaA initiator protein of Escherichia coli

DnaA protein of Escherichia coli is a sequence-specific DNA binding protein required for the initiation of DNA replication from the chromosomal origin, oriC, and of several E. coli plasmids. At a moderate ionic strength, purified DnaA protein has a strong tendency to aggregate; the self-aggregate form is inactive in DNA replication. Binding of ATP or ADP to DnaA protein protected it from aggregation to maintain its replication activity. AMP or cyclic AMP had no protective effect. The molecular chaperone DnaK protected DnaA protein from aggregation with or without ATP. DnaJ and GrpE were not stimulatory. Chaperonins GroEL and GroES were also able to prevent aggregation but only in the presence of ATP. The studies presented here show that for DnaA protein to be active in the initiation of DNA replication, it must be prevented from forming a self-aggregate by the binding of adenine nucleotides, and/or by the action of molecular chaperones.

Membrane-mediated release of nucleotide from an initiator of chromosomal replication, Escherichia coli DnaA, occurs with insertion of a distinct region of the protein into the lipid bilayer

DnaA protein, the initiator protein of E. coli chromosomal replication, can be rejuvenated from an inactive ADP form to active ATP-DnaA protein by acidic phospholipids in a fluid bilayer. Cross-linking studies with the photoactivable phospholipid analog 1-O-hexadecanoyl-2-O-[9-[[[2-[125I]iodo-4-(trifluoromethyl-3H- diazirin -3-yl)benzyl]oxy]carbonyl]nonanoyl]-sn-glycero-3-phosphocholine reveal insertion of DnaA protein into the hydrophobic region of the bilayer; this insertion is accompanied by membrane-mediated dissociation of the tightly bound allosteric nucleotides ADP and ATP. Photolabeling of DnaA protein occurred with membrane properties that resembled those needed for reactivation of ADP-DnaA protein; efficient labeling of DnaA protein was observed only when the lipid analog was incorporated into anionic vesicles and the temperature during treatment was above the gel to liquid crystalline phase transition. Predominant hydrophobic photolabeling was localized within a single region of DnaA protein, a region that contains putative amphipathic helices and has been shown to contain information essential for functional interaction with membranes.

Helicase delivery and activation by DnaA and TrfA proteins during the initiation of replication of the broad host range plasmid RK2

Specific binding of the plasmid-encoded protein, TrfA, and the Escherichia coli DnaA protein to the origin region (oriV) is required for the initiation of replication of the broad host range plasmid RK2. It has been shown that the DnaA protein which binds to DnaA boxes upstream of the TrfA-binding sites (iterons) cannot by itself form an open complex, but it enhances the formation of the open complex by TrfA (Konieczny, I., Doran, K. S., Helinski, D. R., Blasina, A. (1997) J. Biol. Chem. 272, 20173). In this study an in vitro replication system is reconstituted from purified TrfA protein and E. coli proteins. With this system, a specific interaction between the DnaA and DnaB proteins is required for delivery of the helicase to the RK2 origin region. Although the DnaA protein directs the DnaB-DnaC complex to the plasmid replication origin, it cannot by itself activate the helicase. Both DnaA and TrfA proteins are required for DnaB-induced template unwinding. We propose that specific changes in the nucleoprotein structure mediated by TrfA result in a repositioning of the DnaB helicase within the open origin region and an activation of the DnaB protein for template unwinding.

The Escherichia coli dnaA gene: four functional domains

The Escherichia coli DnaA protein is a sequence-specific DNA binding protein that promotes the initiation of replication of the bacterial chromosome, and of several plasmids including pSC101. Twenty-eight novel missense mutations of the E. coli dnaA gene were isolated by selecting for their inability to replicate a derivative of pSC101 when contained in a lambda vector. Characterization of these as well as seven novel nonsense mutations and one in-frame deletion mutation are described here. Results suggest that E. coli DnaA protein contains four functional domains. Mutations that affect residues in the P-loop or Walker A motif thought to be involved in ATP binding identify one domain. The second domain maps to a region near the C terminus and is involved in DNA binding. The function of the third domain that maps near the N terminus is unknown but may be involved in the ability of DnaA protein to oligomerize. Two alleles encoding different truncated gene products retained the ability to promote replication from the pSC101 origin but not oriC, identifying a fourth domain dispensable for replication of pSC101 but essential for replication from the bacterial chromosomal origin, oriC.

Threonine 435 of Escherichia coli DnaA protein confers sequence-specific DNA binding activity

The Escherichia coli DnaA protein, as a sequence-specific DNA binding protein, promotes the initiation of chromosomal replication by binding to four asymmetric 9-mer sequences termed DnaA boxes in oriC. Characterization of N-terminal, C-terminal, and internal in-frame deletion mutants identified residues near the C terminus of DnaA protein required for DNA binding. Furthermore, genetic and biochemical characterization of 11 missense mutations mapping within the C-terminal 89 residues indicated that they were defective in DNA binding. Detailed biochemical characterization of one mutant protein bearing a threonine to methionine substitution at position 435 (T435M) revealed that it retained only nonspecific DNA binding activity, suggesting that threonine 435 imparts specificity in binding. Finally, T435M was inactive on its own for in vitro replication of an oriC plasmid but was able to augment limiting levels of wild type DnaA protein, consistent with the proposal that not all of the DnaA monomers in the initial complex are bound specifically to oriC and that direct interaction occurs among monomers.

Ordered and sequential binding of DnaA protein to oriC, the chromosomal origin of Escherichia coli

DnaA protein of Escherichia coli acts in initiation of chromosomal DNA replication by binding specific sequences, termed DnaA boxes in the chromosomal origin, oriC. On binding, it induces a localized unwinding to create a structure recognized by other replication proteins that act subsequently in the initiation process. In this report, we examined the binding of DnaA protein to each of the DnaA boxes in oriC. By gel mobility shift assays, DnaA protein formed at least six discrete complexes. ATP or ADP included in the reaction mixture prior to electrophoresis was required. Chemical cleavage of isolated complexes with 1,10-phenanthroline-copper revealed that DnaA protein binds in an ordered manner to the DnaA boxes in oriC. Preferential binding to one DnaA box (R4) was confirmed by demonstration that a DNA fragment containing it was bound with greater affinity than another DnaA box sequence (R1). In vitro replication activity correlated with a complex formed at a ratio of 30 DnaA monomers/oriC in which all DnaA boxes are occupied. The last site bound is DnaA box R3. This event may be critical in promoting initiation from oriC as it correlates with in vivo observations that binding of DnaA protein to box R3 occurs at the time of initiation of chromosomal replication, whereas other DnaA boxes are bound by DnaA protein throughout the cell cycle (Cassler, M. R., Grimwade, J. E., and Leonard, A. C.(1995) EMBO J. 14, 5833-5841).

The A184V missense mutation of the dnaA5 and dnaA46 alleles confers a defect in ATP binding and thermolability in initiation of Escherichia coli DNA replication

The temperature-sensitive dnaA5 and dnaA46 alleles each contain two missense mutations. These mutations have been separated and the resulting mutant proteins studied with regard to their role in initiation of DNA replication in vitro. Whereas the His-252 to tyrosine substitution (H252Y) unique to the dnaA46 allele did not affect the activities of DnaA protein, the unique substitution of the dnaA5 allele, Gly-426 to serine (G426S), was reduced in its DNA-binding affinity for oriC, the chromosomal origin. This suggests that the C-terminal region of the DnaA protein is involved in DNA binding. The alanine-to-valine substitution at amino acid 184 (A184V) that is common to both of the alleles is responsible for the thermolabile defect and lag in DNA synthesis of these mutants. Mutant proteins bearing the common substitution were defective in ATP binding and were inactive in a replication system reconstituted with purified proteins. DnaK and GrpE protein activated these mutant proteins for replication and ATP binding; the latter was measured indirectly by the ATP-dependent formation of a trypsin-resistant peptide. However, with this assay, the ATP-binding affinity appeared to be reduced relative to wild-type DnaA protein. Activation was by conversion of a self-aggregate to the monomer, and also by a conformational alteration that correlated with ATP binding.

DnaA protein is sensitive to a soluble factor and is specifically inactivated for initiation of in vitro replication of the Escherichia coli minichromosome

DnaA protein loses the capacity to initiate chromosomal replication when treated with a soluble cell extract. This inactivation depends upon DNA and hydrolyzable ribonucleoside triphosphate. The extract does not affect the activities of other replicative proteins or the ability of DnaA to initiate replication of single-stranded DNA that contains a DnaA-binding hairpin, indicating that the inhibitory effect is specific for the action of DnaA at oriC. Gel filtration experiments implicate a 150-kDa factor as being responsible. Mutant DnaAcos protein, which causes overinitiation in vivo, is insensitive to the inactivating factor, suggesting a requirement for this negative control in vivo. We propose that a soluble factor controls initiation through down-regulation of DnaA protein.

Synthesis of DnaK protein during the division cycle of Escherichia coli

DnaK protein is involved in the initiation of DNA synthesis from the Escherichia coli chromosome as well as from the replication origins of phage lambda and P1. The synthesis of dnaK mRNA and protein has been reported to vary during the cell cycle of Caulobacter crescentus (Gomes et al., 1990). We have measured the expression of DnaK protein during the E. coli division cycle using the membrane-elution method. Cells labelled with a radioactive amino acid at different times during the division cycle were analysed for radiolabelled DnaK protein by quantitative immunoprecipitation, gel electrophoresis and autoradiography. In contrast to reports of cell-cycle-specific synthesis of DnaK protein in C. crescentus, we find the synthesis of DnaK protein to be invariant during the E. coli division cycle. Its synthesis occurs exponentially, as does the synthesis of total cell protein.

DNA replication, the bacterial cell cycle, and cell growth

The coupling of replication to the cell cycle and cell growth involves events that occur at oriC. Immediately after initiation, there is an eclipse phase during which reinitiation from the newly synthesized origins is prevented. GATC sites in oriC remain in a hemimethylated state longer than other sites because of their association with the outer membrane, which prevents DnaA from binding and activating additional rounds of initiation. After the origins are methylated and released from the outer membrane, the concentration of newly synthesized DnaA and the activation of oriC by transcription from the nearby mioC and gid promoters determine when the next rounds of replication initiate. If growth rate is reduced, the synthesis of (p)ppGpp will increase, and this will lead to a decrease in dnaA, mioC, and gid transcription. On the other hand, if growth rate is increased by access to a tasty meal, synthesis of (p)ppGpp will decrease, expression of dnaA, mioC, and gid genes will increase, and a shortening of the interinitiation time will result. The participation of all these control features ensures rapid and precise coordination of DNA replication with cell growth.

A single DnaA box is sufficient for initiation from the P1 plasmid origin

The P1 plasmid replication origin requires the host DnaA protein for function. Two DnaA-binding boxes lie in tandem within the previously defined minimal origin, constituting its left boundary. Three more boxes lie 200 base pairs to the right of these, in the leader region for the P1 repA gene. We show that either set alone is active for origin function. One of the two origin boxes is relatively inactive. Constructs with just one of the five boxes are active for specific origin function as long as the box conforms exactly to the published consensus. This single consensus box is functional when placed either to the left or right of the core origin sequences. The flexibility shown by this system suggests that the boxes play a role different from those in the host oriC origin, where the number and position of boxes are critical.