Solid-phase extraction of phenols

3D printed clear resin stir bar sorptive extraction coupled with high performance liquid chromatography for trace chlorophenols analysis in environmental water samples

3D printing is an additive manufacturing technology based on digital model files. 3D printing has become a popular manufacturing tool in various fields. Stereolithography offers a series of advantages compared to its counterparts, such as smooth prints, appropriate resolution in all the axes, acceptable organic solvent compatibility and sufficient tightness to the flowing of solutions/solvents at moderate/high pressure. Thus, this work used stereolithography and clear resin (polymethyl methacrylate resin and epoxy resin) to prepare stir bars' coatings, which reduced the size of the fabricated stir bar (1 mm) and no swelling property in organic solvents. In this work, three types of structures were designed as the coatings of stir bars, which were solid, discal, and lattice coatings with equal mass (0.13 g). Because of the largest surface area, lattice coatings were chosen to make clear resin stir bars. The clear resin stir bars were used for stir bar sorptive extraction and combined with high performance liquid chromatography to develop a new method, which was successfully applied to detect four chlorophenols in environmental water samples. Compared with the previous work using melt deposition modeling 3D printing, this work could print hollow structures with higher precision. The stir bars could have higher rotational speed (700 rpm vs 350 rpm), smaller desorption volume (500 μL vs 2 mL), and shorter extraction time (60 min vs 90 min). The stir bars also had excellent mechanical performance and long lifetimes of up to 160 times. LODs of this method were between 0.30 μg/L (2-CP) and 0.97 μg/L (2,4,6-TCP) (S/N = 3), which were below the concentration limits of surface water samples. Relative standard deviations of the stir bars were 1.4-3.9 % (n = 7, c = 10 μg/L).

Development of a Dispersive Liquid-Liquid Microextraction Method for Quantification of Volatile Compounds in Wines Using Gas Chromatography-Mass Spectrometry

Background/Objectives: This study reports the development of a straightforward, efficient, and cost-effective dispersive liquid-liquid microextraction (DLLME) method for the gas chromatography-mass spectrometry (GC-MS) analysis of volatile compounds present in wine. Methods: Four critical parameters were optimised using a D-optimal design to maximise extraction outcomes of the targeted analytes from a 10 mL sample, while minimising interference from other compounds. The analytical characteristics of the method were assessed using 36 target compounds. Results: The method provided satisfactory linearity (correlation coefficients > 0.990), good repeatability for both for intra- and inter-day measurements (RSD < 10.3%), and suitable recoveries of target analytes from both model (83-110%) and real matrices (80-120%). The validated method was subsequently applied to analyse the aroma profile of 30 New Zealand Pinot noir (PN) wine samples. Conclusions: This study contributes to the advancement of analytical techniques available to both industry and researchers to explore the complex aroma profiles of wines.

A Review of Gastrodia Elata Bl.: Extraction, Analysis and Application of Functional Food

Gastrodia elata Bl. still widely known as a medicinal plant due to its anti-inflammatory, neuroprotection, cardiovascular protection etc. Additionally, these medical applications cannot be separated from its antioxidant, anti-aging, regulating cell apoptosis ability, which make it have potential as a functional food as well as it has been eaten for more than 2,000 years in China. At present, although Gastrodia elata Bl. has appeared in a large number of studies, much of the research is based on drugs rather than foods. The review of Gastrodia elata Bl. from the perspective of food is one of the necessary steps to promote related development, by reviewing the literature on analytical methods of Gastrodia elata Bl. in recent years, critical components change in the extraction, analytical methods and improvement of food applications, all of aspects of it was summarized. Based on the report about physical and chemical changes in Gastrodia elata Bl. to discover the pathway of Gastrodia elata Bl. functional food development from current to the future.

Simultaneous extraction, separation, and analysis of 5-caffeoylquinic acid and caffeine from coffee co-product by PLE-SPE × HPLC-PDA two-dimensional system

This study proposed an integrated and automated procedure to extract, separate, and quantify bioactive compounds from a coffee co-product by pressurized liquid extraction (PLE) coupled inline with solid phase extraction (SPE) and online with HPLC-PDA (PLE-SPE × HPLC-PDA). The efficiency of the two-dimensional system in performing real-time analysis was verified by comparing HPLC-PDA results acquired by the system (online) and carried out after the extract fraction collection (offline). Different flow rates (1.5 mL/min for 336 min, 2 mL/min for 246.4 min, and 2.5 mL/min for 201.6 min) were evaluated to optimize the extraction, separation, and analysis method by PLE-SPE × HPLC-PDA. Subcritical water at 125 °C and 15 min of static time allowed the highest extraction yields of caffeine and 5-caffeoylquinic acid (5-CQA). Caffeine was retained during the aqueous extraction in the SPE adsorbent and eluted from the column by exchanging the solvent for a hydroethanolic mixture. Thus, caffeine was separated from 5-CQA and other phenolic compounds, producing extracts with different compositions. The solvent flow rate did not have a significant effect (p-value ≥ 0.05) on the extraction, separation, and analysis (by online and offline methods) of 5-CQA. However, the online quantification of retained compounds in the SPE (i.e., caffeine) can underestimate concentration compared to offline analysis. Nevertheless, the results suggest that coupling of advanced techniques can be used to efficiently extract, separate, and analyze fractions of phenolic compounds, supplying an integrated method to produce high-added value ingredients for several applications.

Recent developments of polysaccharide based superabsorbent nanocomposite for organic dye contamination removal from wastewater - A review

One of the main problems with water pollution is dye contamination of rivers, industrial effluents, and water sources. It has endangered the world's sources of drinking water. Several remediation strategies have been carefully developed and tested to minimize this ominous picture. Due to their appealing practical and financial benefits, adsorption methods in particular are often listed as one of the most popular solutions to remediate dye-contaminated water. Biopolymer-based hydrogel nanocomposites are a cutting-edge class of materials with a wide range of applications that are effective in removing organic dyes from the environment. Since the incorporation of various materials into hydrogel matrices generated composite materials with distinct characteristics, these unique materials were often alluded to as ideal adsorbents. The fundamental emphasis of the conceptual and critical review of the literature in this research is the significant potential of hydrogel nanocomposites (HNCs) to remediate dye-contaminated water (especially for articles from the previous five years). The review also provides knowledge for the development of biopolymer-based HNCs, prospects, and opportunities for future research. It is also focused on optimum conditions for dye adsorption processes along with their adsorption kinetics and isotherm models. In summary, the information gained in this review research may contribute to a strengthened scientific rationale for the practical and efficient application of these novel adsorbent materials.

Phenolic compounds in surface water: methodology and occurrence in Doce River, Brazil

Phenolic compounds are widely spread in surface water, mainly in developing countries, where sewage and wastewater treatment are still reduced. Thus, this work quantified these pollutants in the Doce River analyzing the associated risk for the environment and human health. This river is in the state of Minas Gerais in Brazil and was recently impacted by the collapse of a mining dam that compromised the resilience of the entire watershed. For that purpose, a methodology for simultaneous identification and quantification of 17 different phenols was developed. It was possible to verify phenolic compounds' occurrence with concentration ranging from 0.13 to 24.16 µg·L^-1. 2-Nitrophenol and bisphenol A appeared in all samples analyzed. The analytical method was processed using solid-phase extraction (SPE) (C₁₈ cartridge), gas chromatography with FID, and mass spectrometry to define the analytes' retention time. For case validation, the selectivity, linearity, detection and quantification limits, sensitivity, precision, accuracy, resolution, matrix effect, and peak quality were assessed. Four different solvents were tested in the recovery-grade trials, which were dichloromethane, methanol, acetonitrile, and ethyl acetate. Among them, methanol had a better performance and was used throughout all analyses. The phenolic compounds had a recovery degree higher than 50% after SPE, regardless of the matrices.

Development and Optimisation of Solid-Phase Extraction of Extractable and Bound Phenolic Acids in Spelt (Triticum spelta L.) Seeds

A solid-phase extraction (SPE) technique was developed and optimised for isolation and concentration of extractable and bound phenolic acids from germinated spelt seeds, for analysis by liquid chromatography–mass spectrometry. Samples initially underwent solvent extraction under different conditions to maximise the yield of phenolic antioxidants. Optimal extraction conditions for extractable phenolics were absolute methanol as solvent, sample-to-methanol ratio 1:9, and reconstitution in non-acidified water. The bound phenolics were extracted from sample pellets using hydrolysis with 2 M NaOH, acidification of the hydrolysate with formic acid, and simultaneous isolation and purification using Strata X polymeric RP tubes. Compared to liquid-liquid extraction, this direct SPE protocol has significant advantages in terms of higher extraction efficiencies of total and individual phenolics and their antioxidant activities. These data suggest that direct SPE represents a rapid and reliable method for quantitative analysis of both the extractable and the commonly overlooked bound phenolics in Triticum spelta seeds.

A novel approach for the synthesis of nanostructured Ag3PO4 from phosphate rock: high catalytic and antibacterial activities

BACKGROUND

Silver orthophosphate (Ag3PO4) has received enormous attention over the past few years for its higher visible light photocatalytic performance as well as for various organic pollutants degradation in aqueous media. Therefore, considerable efforts have been made to the synthesis of Ag3PO4 with high catalytic efficiency, long lifetime, and using low-cost inorganic precursors.

RESULTS

This article describes our efforts to develop a novel approach to synthesize of nanostructured silver phosphate (Ag3PO4) using phosphate rock as alternative and natural source of PO43- precursor ions. The catalytic experimental studies showed that the nanostructured Ag3PO4 exhibited excellent catalytic activity for reduction of p-nitrophenol in the presence of NaBH4 at room temperature. Furthermore, the antibacterial studies revealed that the obtained Ag3PO4 possess significant effect against E. Coli and S. Aureus bacteria.

CONCLUSION

The obtained results make the nanostructured Ag3PO4 prepared from natural phosphate as a highly promising candidate to be used as efficient catalyst and antibacterial agent.

DFT computational study of trihalogenated aniline derivative's adsorption onto graphene/fullerene/fullerene-like nanocages, X12Y12 (X = Al, B, and Y = N, P)

Adsorption of 2,4,6-tribromoaniline (BA), 2,4,6-trifluoroaniline (FA) and 2,4,6-trichloroaniline (CA) onto the surface of coronene/fullerene/fullerene-like nanocages was investigated by theoretical calculations. Due to the adsorption of BA/FA/CA, there are significant changes in chemical descriptors and nonlinear optical properties. Energy gap values of all nanoclusters are lowered, giving an increase in conductivity of complexes except for fullerene. All complex's ultraviolet visible wavenumber is blue-shifted and especially for fullerene complex, the values are very high. The enhancement of Raman intensities shows that it is possible to design a nanocage sensor for detecting these compounds by surface-enhanced Raman scattering (SERS).Communicated by Ramaswamy H. Sarma.

Porous thin-film molecularly imprinted polymer device for simultaneous determination of phenol, alkylphenol and chlorophenol compounds in water

A porous water-compatible molecularly imprinted polymer (MIP) coating using catechol as a pseudo-template and a water-soluble functional monomer (4-vinyl benzoic acid) with ethylene glycol dimethacrylate as the crosslinker was developed for extraction of phenols from environmental water samples. The MIP devices were combined with ultra high performance liquid chromatography with a photodiode array detector (UHPLC-PDA) suitable for the simultaneous determination of trace levels of phenolic compounds with a wide range of polarities -phenol, alkylphenols and chlorophenols- in seawater and produced water. Parameters that influence extraction efficiency (salinity, pH, polymer mass, desorption solvent, and desorption time) were optimized to give method detection limits (LOD) ranging from 0.1 to 2 μg L^-1 and linearity (R²>0.99) over at least three orders of magnitude for the hydrophobic phenols (e.g., 0.5-1000 μg L^-1 for 2,4,6-trichlorophenol) and ~2 orders of magnitude for the light phenols (e.g., 10-120 μg L^-1 for phenol, 5-120 μg L^-1 for methylphenols and 2-chlorophenol, 0.5-120 μg L^-1 3-methyl-4-chlorophenol and 2,4-dichlorophenol). The recoveries from authentic spiked samples ranged from 85 to 100% with %RSDs of 0.2-14% for seawater and 81-107% with %RSD of 0.1-11% for produced water. The resulting MIP-based extraction requires no pre-conditioning of the sorbent, and because the required sample size is small and sample manipulation is limited, the method is easy to multiplex for high throughput sample processing.

Phenol removal from wastewater by surface imprinted bacterial cellulose nanofibres

In this study, we have reported a novel wastewater treatment technique by phenol imprinted bacterial cellulose (BC-MIP) nanofibres with high specificity and adsorption capacity. N-methacryloyl-(L) phenylalanine methyl ester (MAPA) functional monomer was used to create specific binding sites for the template molecule phenol via electrostatic and hydrophobic interactions. BC-MIP nanofibres were synthesized by surface imprinting approach in the presence of different amounts of total monomer (% weight), monomer/template ratio and polymerization time. Then, the nanofibres were characterized by FTIR-ATR, surface area analysis (BET), elemental analysis, scanning electron microscopy (SEM) and contact angle measurements. Adsorption studies were performed with respect to pH, temperature and ionic strength, and the adsorption capacity was calculated by using the spectrophotometer. In order to desorb the adsorbed phenol from BC-MIP nanofibres, 0.1 M NaCl solution was used. Besides, BC-MIP nanofibres were applied to real wastewater samples from Ergene basin in Turkey. The suitable equilibrium isotherm was determined as Langmuir isotherm. To evaluate the selectivity of the BC-MIP nanofibres, similar molecules were utilized as competitor molecules, which were 2-chlorophenol, 4-chlorophenol and 2,4-dichlorophenol. Electrostatic interactions were found to contribute to the generation of specific recognition binding sites. The results have shown that imprinting of phenol was achieved successfully with high adsorption capacity. The phenol removal efficiency was reported up to 97%. BC-MIP nanofibres were used 10 times with a negligible decrease in adsorption capacity.

Application of aqueous two-phase system for selective extraction and clean-up of emerging contaminants from aqueous matrices

This review approaches how aqueous two-phase systems (ATPS), in their various compositions (e.g., polymer + salt, copolymer + salt, ionic liquid + salt, acetonitrile + salt), can be efficiently used for extraction, preconcentration, and clean-up of analytes in aqueous samples to determine the compounds classified as emerging contaminants (ECs). In the literature, there are some studies using ATPS applied to ECs, like pesticides, pharmaceuticals, illicit drugs, personal care products, alkaloids, and hormones, even when in trace concentrations. The ATPS is an alternative to the conventional liquid-liquid extraction technique. However, it is predominantly composed of water and do not generally use organic solvents and, therefore, is based on the principles of green chemistry. An ATPS approach has a unique advantage because it can extract neutral, anionic, cationic, polar, and nonpolar compounds, even when present simultaneously in the same sample. This review covers how this simple and low environmental impact technique has been employed for the analysis of different classes of emerging contaminants.

Sensitive Determination of Acetochlor, Alachlor, Metolachlor and Fenthion Utilizing Mechanical Shaking Assisted Dispersive Liquid-Liquid Microextraction Prior to Gas Chromatography-Mass Spectrometry

A green, sensitive and accurate dispersive liquid-liquid microextraction (DLLME) method was used to preconcentrate four selected pesticides in dam lake water samples for determination by gas chromatography-mass spectrometry (GC-MS). Conditions of the DLLME method were comprehensively investigated and optimized according to type/volume of extraction solvent, type/volume of dispersive solvent, and type/period of mixing. The developed method was validated according to the limits of detection and quantitation, accuracy, precision and linearity. Under the optimum conditions, limit of detection values calculated for alachlor, acetochlor, metolachlor and fenthion were 1.7, 1.7, 0.2 and 7.8 µg/kg (mass based), respectively. The method recorded 202, 104, 275 and 165 folds improvement in detection power values for acetochlor, alachlor, metolachlor and fenthion, respectively, when compared with direct GC-MS measurements. In order to evaluate the accuracy of the developed method, real sample application with spiking experiments was performed on dam lake water samples, and satisfactory percent recovery results in the range of 81%-120% were obtained.

Phytochemical Characterization and In Vitro Antioxidant Properties of Four Brassica Wild Species from Italy

In the present study, we evaluated for the first time the variability of antioxidant traits of four Brassica wild species: B. incana, B. macrocarpa, B. villosa, and B. rupestris. The content of the main water-soluble antioxidants (phenolics, ascorbic acid, and total biothiols) and the in vitro antioxidant potential (1,1-diphenyl-2-picrylhydrazil (DPPH) and superoxide anion scavenging capacity) were investigated. A total of 28 polyphenolic compounds were identified by LC/MS and quantitated by HPLC/DAD analysis. Kaempferol and quercetin derivatives were the most abundant phenolics compared to hydroxycinnamoyl gentiobiosides. In the ten populations, phenolics ranged from 163.9 to 533.9 mg/100 g dry weight (d.w.), ascorbic acid from 7.6 to 375.8 mg/100 g d.w., and total biothiols from 0.59 to 5.13 mg/100 g d.w. The different classes of phytochemicals were separated using solid-phase extraction at increasing methanol concentrations, and the antioxidant power of fractionated extracts was evaluated. The superoxide anion scavenging activity was significantly correlated to phenolics, particularly to flavonol derivatives, while DPPH was mainly related to ascorbic acid content. The present findings improve the knowledge of the phytochemical composition of Italian Brassica wild species by showing the great diversity of phytochemicals among populations and highlighting their importance as a valuable genetic resource for developing new cultivars with improved bioactive content.

Recovery of Polyphenols from Grape Pomace Using Polyethylene Glycol (PEG)-Grafted Silica Particles and PEG-Assisted Cosolvent Elution

Adsorption on a functionalized surface can be an effective way of purifying polyphenols from complex plant extracts. Polymeric resins that rely on hydrophobic interactions suffer from low selectivity, weak affinity towards polyphenols, and lack tunability therefore making the purification of polyphenols less efficient. In this study, a purification process for the recovery of polyphenols from grape pomace extract was successfully developed using hydrogen bonding affinity ligands grafted on silica particles and PEG-assisted elution solvents. Bare silica (SiO₂) and polyethylene glycol (mPEG)-grafted silica microparticles with molecular weights of 2000 and 5000 were tested to determine their polyphenol binding and release characteristics. Functionalizing the surface of bare silica with mPEG ligands increased the adsorption capacity by 7.1- and 11.4-fold for mPEG-2000 and mPEG-5000 compared to bare silica particles, respectively. This was likely due to the introduction of more polyphenol binding sites with mPEG functionalization. Altering the molecular weight (MW) of mPEG grafted on silica surfaces provided tunability in the adsorption capacity. A complete recovery of polyphenols (~99.9%) from mPEG-grafted silica particles was achieved by utilizing PEG–ethanol or PEG–water cosolvent systems. Recovered polyphenols showed up to ~12-fold antioxidant activity compared to grape pomace extract. This study demonstrates that mPEG-grafted silica particles and elution of polyphenols with PEG cosolvents can potentially be used for large-scale purification of polyphenols from complex plant extracts and simplify the use of polyphenols, as PEG facilitates remarkable solvation and is an ideal medium for the final formulation of polyphenols.

Degradation of phenol in wastewater by cathodic microarc plasma electrolysis

In this paper, the cathodic microarc plasma electrolysis (CMPE) was tentatively performed to degrade the phenol in aqueous solution by vapor-gaseous envelope discharge around the Ti cathode. Degradation efficiency of phenol was measured and the intermediate products were evaluated. The suspended particles in solution were analyzed and the decomposition mechanism of phenol in the process of cathodic microarc plasma degradation was discussed. The instantaneous current efficiency reached a peak value firstly and then decreased with the discharge time. In the cathodic plasma region, the Cl substituted the hydrogen on benzene ring in the initial time, which was replaced by a hydroxyl immediately, then the polyhydroxy phenol was easily decomposed. In addition, optical emission spectroscopy was carried out to characterize the plasma features during the CMPE process. The temperature of electron around the microarc discharge envelope reached about 4000 K; thus the phenol was partly carbonized to become graphite particles. CMPE is a promising approach to degrade quickly the phenol in wastewater.

Regeneration of 4-chlorophenol from spent powdered activated carbon by ultrasound

Ultrasound-assisted regeneration of powdered activated carbon (PAC) saturated with 4-chlorophenol (4-CP) was investigated in this work. The variables, i.e., acoustic frequency, density levels, regenerating solution species, spent PAC mass, and the number of repeated cycle, were optimized. The UV-Vis spectra, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and pore structure analysis were used to characterize the regenerated PAC as compared to the virgin and spent PAC. The adsorption experiments indicated that the adsorption kinetics of 4-CP fitted well with the pseudo-second-order model, and the main chemisorption process was nonlinear and heterogeneous. The desorption results showed that the optimized regenerated conditions were identified as 40 kHz of frequency, 0.18 W/mL of sonication intensity, 0.1 M NaOH and 50% (v/v) ethyl alcohol mixture of regeneration solution, and 1 g/L of saturated PAC mass. Under this condition, the regeneration efficiency reached up to 86.81%. Hydroxylated oxidation products especially benzoquinone and hydroquinone were formed during ultrasound regeneration. Ultrasound mainly acted on surface functionalities, mesopores, and macropores of PAC through the hydroxyl radical oxidization resulted from the cavitation effect.

Application of Box-Behnken design in response surface methodology for the molecularly imprinted polymer pipette-tip solid phase extraction of methyl red from seawater samples and its determination by spectrophotometery

In this paper, a rapid, selective and effective technique, pipette-tip solid phase extraction based on molecularly imprinted polymer, was used for extraction and pre-concentration of methyl red (MR) prior to its determination by spectrophotometer. Variables influencing extraction efficiency including type and volume of eluent solvent, sample volume, number of cycles of extraction and elution, amount of sorbent and pH of the sample solution were optimized with two methods of one-variable-at-a-time and response surface methodology (RSM). For RSM optimization, seven factors in three-levels were utilized for Box-Behnken experimental design. Under optimum conditions, a linear calibration graph in the range of 3.0-300.0 μg L^-1 for MR was resulted. The limit of detection of proposed method was 0.50 μg L^-1 for MR. Finally, the investigated method was used for the determination of MR in seawater and the mean recoveries were calculated to be 84.0-98.0% with mean RSD of 2.5-6.7%.

Extraction Properties of New Polymeric Sorbents Applied to Wine

Polymeric sorbents are frequently used in wine, either as solid phase extraction materials for isolation of analytes or as sorptive materials for removal of undesirable compounds (amelioration). Six new polymeric sorbents were produced thermally or in a microwave from various ratios of methacrylic acid, acrylic acid, and 4-vinylbenzoic acid as hydrophilic monomers, together with ethylene glycol dimethacrylate as cross-linker, using different porogen solvents. The relationship between physicochemical properties (pore size, surface area, and polarity) of the sorbents and their sorption properties for compounds in wine was investigated and compared to four commercially available sorbents. With some similarities to their commercial counterparts depending on hydrophobic and hydrophilic characteristics, the six new sorbents showed specificity toward different groups of compounds (e.g., volatiles and phenolics) and could be applied for targeted purposes. The results provide insight into the selection and utilization of new polymeric materials for extraction of components from wine.

Evaluation of activated composite membranes for the facilitated transport of phenol

In this work the results on the first use of an activated composite membrane (ACM) containing Cyanex 923 for the extraction and transport of phenol are presented. A new dense layer-ACM configuration constituted by piperazine showed better stability than that prepared with 1,3-phenylenediamine. The effects of several parameters on the transport of phenol such as feed phase pH, carrier concentration and stripping phase composition were evaluated. The performance of the membrane was also evaluated during continuous additions of phenol and for a long period of time, observing the same rate of extraction and reextraction. Moreover, phenol transport was evaluated starting from synthetic wastewater of resin production plants type. The results exhibit the potential use of ACMs in the elimination and transport of organic species, even when analyte is initially found in complex solutions.

Fast trace determination of nine odorant and estrogenic chloro- and bromo-phenolic compounds in real water samples through automated solid-phase extraction coupled with liquid chromatography tandem mass spectrometry

A fast and reliable method was developed for simultaneous trace determination of nine odorous and estrogenic chloro- and bromo-phenolic compounds (CPs and BPs) in water samples using solid-phase extraction (SPE) coupled with liquid chromatography tandem mass spectrometry (LC-MS/MS). For sample preparation, the extraction efficiencies of two widely applied cartridges Oasis HLB and Sep-Pak C18 were compared, and the Oasis HLB cartridge showed much better extraction performance; pH of water sample also plays important role on extraction, and pH = 2-3 was found to be most appropriate. For separation of the target compounds, small addition of ammonium hydroxide can obviously improve the detection sensitivity, and the optimized addition concentration was determined as 0.2%. The developed efficient method was validated and showed excellent linearity (R ² > 0.995), low limit of detection (LOD, 1.9-6.2 ng/L), and good recovery efficiencies of 57-95% in surface and tap water with low relative standard deviation (RSD, 1.3-17.4%). The developed method was finally applied to one tap and one surface water samples and most of these nine targets were detected, but all of them were below their odor thresholds, and their estrogen equivalent (EEQ) were also very low.

Tantala-based sol-gel coating for capillary microextraction on-line coupled to high-performance liquid chromatography

A sol-gel organic-inorganic hybrid sorbent, consisting of chemically integrated tantalum (V) ethoxide (TaEO) and polypropylene glycol methacrylate (PPGM), was developed for capillary microextraction (CME). The sol-gel sorbent was synthesized within a fused silica capillary through hydrolytic polycondensation of TaEO and chemical incorporation of PPGM into the evolving sol-gel tantala network. A part of the organic-inorganic hybrid sol-gel network evolving in the vicinity of the capillary walls had favorable conditions to get chemically bonded to the silanol groups on the capillary surface forming a surface-bonded coating. The newly developed sol-gel sorbent was employed to isolate and enrich a variety of analytes from aqueous samples for on-line analysis by high-performance liquid chromatography (HPLC) equipped with a UV detector. CME was performed on aqueous samples containing trace concentrations of analytes representing polycyclic aromatic hydrocarbons, ketones, alcohols, amines, nucleosides, and nucleotides. This sol-gel hybrid coating provided efficient extraction with CME-HPLC detection limits ranging from 4.41pM to 28.19 pM. Due to direct chemical bonding between the sol-gel sorbent coating and the fused silica capillary inner surface, this sol-gel sorbent exhibited enhanced solvent stability. The sol-gel tantala-based sorbent also exhibited excellent pH stability over a wide pH range (pH 0-pH 14). Furthermore, it displayed great performance reproducibility in CME-HPLC providing run-to-run HPLC peak area relative standard deviation (RSD) values between 0.23% and 3.83%. The capillary-to-capillary RSD (n=3), characterizing capillary preparation method reproducibility, ranged from 0.24% to 4.11%. The results show great performance consistency and application potential for the sol-gel tantala-PPGM sorbent in various fields including biomedical, pharmaceutical, and environmental areas.

Extraction of phenolic compounds from water samples by dispersive micro-solid-phase extraction

In this article, the use of magnetically separable sorbent polyaniline/silica-coated nickel nanoparticles is evaluated under a dispersive micro-solid-phase extraction approach for the extraction of phenolic compounds from water samples. The sorbent was prepared by in situ chemical polymerization of aniline on the surface of silica-modified nickel nanoparticles and was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray spectrometry, and vibrating sample magnetometry. Effective variables such as amount of sorbent (milligrams), pH and ionic strength of sample solution, volume of eluent solvent (microliters), vortex, and ultrasonic times (minutes) were investigated by fractional factorial design. The significant variables optimized by a Box-Behnken design were combined by a desirability function. Under the optimized conditions, the calibration graphs of analytes were linear in a concentration range of 0.02-100 μg/mL, and with correlation coefficients more than 0.999. The limits of detection and quantification were in the ranges of 10-23 and 33-77 μg/L, respectively. This procedure was successfully employed in the determination of target analytes in spiked water samples; the relative mean recoveries ranged from 96 to 105%.

A forest of SiO2 nanowires covered by a TiO2 thin film for an efficient photocatalytic water treatment

Disordered TiO₂/SiO₂ nanowires possess enhanced photocatalytic activity due to the synergy of morphology and light trapping properties of the NW forest.

A novel cyano functionalized silica-titania oxide sol–gel based ionic liquid for the extraction of hazardous chlorophenols from aqueous environments

The extraction of chlorophenols on Si-Ti@CN/IL is highly pH dependent and significant percent extraction was achieved at pH = 2.

Determination of Chlorophenols in Water Samples Using Solid-Phase Extraction Enrichment Procedure and Gas Chromatography Analysis

Solid-phase extraction (SPE) procedure followed by derivatization and gas chromatography electron capture detection was evaluated for the determination of trace amounts of chlorophenols (CPs) in waters samples. Different parameters affecting extraction efficiency such as, volume of elution solvent, volume and pH of water sample, quantity of sorbent phase were studied and optimized. SPE was carried out on polystyrene-divinylbenzene (Bond Elut ENV) and high recoveries were obtained using 1000 mg of this cartridge for the treatment of 500 mL of acidified water sample. The described method was then tested on spiked tap, mineral, ground and surface water samples. The overall procedure provided limits of detection lower than 20 ng L(-1), recoveries of 70%-106% and an enrichment factor of 500 for the examined CPs in 500 mL water samples. Among the studied compounds, pentachlorophenol was detected in tap water at a concentration level of 0.06 µg L(-1).