In situ stimulation of a T helper cell hybridoma with a cellulose-bound peptide antigen

SPOT Synthesis: The Solid-Phase Peptide Synthesis on Planar Surfaces

Peptide libraries are a highly useful tool for drug development. While most preparations of peptide libraries are laborious during either the synthesis or its screening, the SPOT synthesis offers the possibility of directly synthesizing large numbers of peptides on a planar surface. As a positionally addressable, multiple solid-phase synthesis technique, the synthesis allows a very convenient handling during the screening of that peptide library in a form of an array. This publication will provide protocols for the basic procedures of the SPOT synthesis and references to some important literature regarding that technique and its application.

SPOTing Acetyl-Lysine Dependent Interactions

Post translational modifications have been recognized as chemical signals that create docking sites for evolutionary conserved effector modules, allowing for signal integration within large networks of interactions. Lysine acetylation in particular has attracted attention as a regulatory modification, affecting chromatin structure and linking to transcriptional activation. Advances in peptide array technologies have facilitated the study of acetyl-lysine-containing linear motifs interacting with the evolutionary conserved bromodomain module, which specifically recognizes and binds to acetylated sequences in histones and other proteins. Here we summarize recent work employing SPOT peptide technology to identify acetyl-lysine dependent interactions and document the protocols adapted in our lab, as well as our efforts to characterize such bromodomain-histone interactions. Our results highlight the versatility of SPOT methods and establish an affordable tool for rapid access to potential protein/modified-peptide interactions involving lysine acetylation.

Multiplex epitope mapping using bacterial surface display reveals both linear and conformational epitopes

As antibody-based diagnosis and therapy grow at an increased pace, there is a need for methods which rapidly and accurately determine antibody-antigen interactions. Here, we report a method for the multiplex determination of antibody epitopes using bacterial cell-surface display. A protein-fragment library with 10(7) cell clones, covering 60 clinically-relevant protein targets, was created and characterized with massively parallel sequencing. Using this multi-target fragment library we determined simultaneously epitopes of commercial monoclonal and polyclonal antibodies targeting PSMA, EGFR, and VEGF. Off-target binding was observed for one of the antibodies, which demonstrates the methods ability to reveal cross-reactivity. We exemplify the detection of structural epitopes by mapping the therapeutic antibody Avastin. Based on our findings we suggest this method to be suitable for mapping linear and structural epitopes of monoclonal and polyclonal antibodies in a multiplex fashion and could find applicability in serum profiling as well as other protein-protein interaction studies.

High-resolution mapping of linear antibody epitopes using ultrahigh-density peptide microarrays

Antibodies empower numerous important scientific, clinical, diagnostic, and industrial applications. Ideally, the epitope(s) targeted by an antibody should be identified and characterized, thereby establishing antibody reactivity, highlighting possible cross-reactivities, and perhaps even warning against unwanted (e.g. autoimmune) reactivities. Antibodies target proteins as either conformational or linear epitopes. The latter are typically probed with peptides, but the cost of peptide screening programs tends to prohibit comprehensive specificity analysis. To perform high-throughput, high-resolution mapping of linear antibody epitopes, we have used ultrahigh-density peptide microarrays generating several hundred thousand different peptides per array. Using exhaustive length and substitution analysis, we have successfully examined the specificity of a panel of polyclonal antibodies raised against linear epitopes of the human proteome and obtained very detailed descriptions of the involved specificities. The epitopes identified ranged from 4 to 12 amino acids in size. In general, the antibodies were of exquisite specificity, frequently disallowing even single conservative substitutions. In several cases, multiple distinct epitopes could be identified for the same target protein, suggesting an efficient approach to the generation of paired antibodies. Two alternative epitope mapping approaches identified similar, although not necessarily identical, epitopes. These results show that ultrahigh-density peptide microarrays can be used for linear epitope mapping. With an upper theoretical limit of 2,000,000 individual peptides per array, these peptide microarrays may even be used for a systematic validation of antibodies at the proteomic level.

Synthetic peptide arrays for investigating protein interaction domains

Synthetic peptide array technology was first developed in the early 1990s by Ronald Frank. Since then the technique has become a powerful tool for high throughput approaches in biology and biochemistry. Here, we focus on peptide arrays applied to investigate the binding specificity of protein interaction domains such as WW, SH3, and PDZ domains. We describe array-based methods used to reveal domain networks in yeast, and briefly review rules as well as ideas about the synthesis and application of peptide arrays. We also provide initial results of a study designed to investigate the nature and evolution of SH3 domain interaction networks in eukaryotes.

SPOT synthesis as a tool to study protein-protein interactions

Peptide arrays are a widely used tool in proteomic research for investigations of drug development and molecular interactions including protein-protein or protein-peptide interactions. Most peptide synthesis techniques are able to simultaneously synthesize only up to a few hundred single peptides. Using the SPOT™ technique, it is possible to synthesize and screen in parallel up to 8,000 peptides or peptide mixtures. In addition, such peptides can be released from the membrane and transferred onto peptide microarrays. Here we present protocols for the peptides synthesis on cellulose including the preparation of different cellulose membranes and easy-to-use detection methods on these peptide macroarrays. In addition, a protocol to produce and screen peptide microarray using the SPOT technology is provided.

Synthesis of antimicrobial peptides using the SPOT technique

Developing new lead structures for drugs against multiresistant bacteria is an urgent need for modern medicine. Antimicrobial peptides are a class of drugs that can be used to discover such structures. In order to support development of this research, a fast, easy, and inexpensive method to synthesize peptides is necessary. The SPOT synthesis has the potential to produce the required peptide arrays, synthesizing up to 8,000 peptides, peptide mixtures, or other organic compounds on cellulose or other planar surfaces in a positionally addressable and multiple manner. Protocols for the preparation of cellulose membranes and the SPOT synthesis as well as cleavage of peptides from the support are described.

The spot technique: synthesis and screening of peptide macroarrays on cellulose membranes

Peptide arrays are a widely used tool for drug development. For peptide-based drug design it is necessary to screen a large number of peptides. However, there are often difficulties with this approach. Most common peptide synthesis techniques are able to simultaneously synthesize only up to a few hundred single peptides. Spot synthesis is a positionally addressable, multiple synthesis technique offering the possibility of synthesizing and screening up to 10,000 peptides or peptide mixtures on cellulose or other membrane surfaces. In this chapter we present the basic procedures and screening methods related to spot synthesis and outline protocols for easy-to-use detection methods on these peptide arrays.

Synthesis, conformation and T-helper cell stimulation of an O-linked glycopeptide epitope containing extended carbohydrate side-chains

To answer the question whether or not T cells to immunodominant protein fragments recognize glycosylated antigens, we synthesized a series of glycopeptides corresponding to peptide 31D, a major T-helper cell epitope of the rabies virus nucleoprotein. Thr4 of the epitope is known to allow mono- or disaccharide side-chain substitutions in either alpha- or beta-anomeric configuration without interfering with MHC-binding. To model naturally occurring glycoprotein fragments that carry extended sugar chains, we prepared Fmoc-Ser/Thr-OPfp building blocks containing alpha- and beta-linked linear tri- and heptasaccharides. Peptide 31D was synthesized with the complex carbohydrates attached to Thr4, and the T-helper cell activity of the glycopeptides was determined. Addition of alpha-linked carbohydrates, that mimic most of the natural O-linked glycoproteins, resulted in a major drop in the T-cell stimulatory ability in a sugar length-dependent manner. In contrast, the cytosolic glycoprotein mimicking beta-linked glycopeptides retained their T-cell stimulatory activity, with the trisaccharide-containing analogue being almost as potent as the unglycosylated peptide. When the peptides were preincubated with diluted human serum, all peptides lost their ability to stimulate the 9C5.D8-H hybridoma. These findings indicated that (i) in contrast to cytosolic glycosylation, incorporation of long O-linked carbohydrates into T-helper cell epitopes abrogates the antigenicity of these protein fragments, and (ii) glycosylation is not a viable alternative to improve the immunogenic properties of subunit peptide vaccines. Glycosylation with all four carbohydrate moieties similarly destroyed the inducible alpha-helical structure of peptide 31D as detected by CD, indicating that the differences in the T-cell activity were not due to different peptide conformations.

Peptide libraries for T cell epitope screening and characterization

Screening with synthetic peptide libraries is the fastest and most efficient method for locating helper T cell (Th) and cytotoxic T cell (Tc) epitopes in proteins of known sequence. Epitope detection and analysis can be performed on clones, lines or freshly isolated ex-vivo T cells. Novel approaches to peptide library design ensure that the peptides are presented in a format which is optimized for Th or Tc epitope detection and analysis. The major histocompatibility complex (MHC) binding motif can be determined by binding or functional assays using analogs of the minimal active sequence.

Coherent membrane supports for parallel microsynthesis and screening of bioactive peptides

Since its invention the SPOT-synthesis methodology has become one of the most efficient strategies for the miniaturized assembly of large numbers of peptides. The combination of a facile synthetic method with high throughput solid- and solution-phase screening assays qualifies the SPOT-technique as a valuable tool in biomedical research. Recent developments such as the introduction of novel polymeric surfaces, new linker and cleavage strategies as well as automated robot systems extended the scope of practical chemical reactions that can be accommodated as well as the numbers of compounds obtainable by this technique. Thus, highly complex spatially addressed compound arrays have become accessible. Together with the introduction of novel screening assays, the method is excellently suited to elucidate recognition events on the molecular level.

Applications of peptide arrays prepared by the SPOT-technology

The growing range of applications for peptide arrays synthesized on coherent membranes by the SPOT-synthesis method proves they have emerged as a powerful proteomics technique to study molecular recognition events and identify biologically active peptides. Several developments, such as the introduction of novel polymeric surfaces, linkers, synthesis/cleavage strategies and detection methods, are facilitating an increasing spectrum of accessible compounds and applications in biological or pharmaceutical research.

Localization of a binding site for herpes simplex virus glycoprotein D on herpesvirus entry mediator C by using antireceptor monoclonal antibodies

The human herpesvirus entry mediator C (HveC), also known as the poliovirus receptor-related protein 1 (PRR1) and as nectin-1, allows the entry of herpes simplex virus type 1 (HSV-1) and HSV-2 into mammalian cells. The interaction of virus envelope glycoprotein D (gD) with such a receptor is an essential step in the process leading to membrane fusion. HveC is a member of the immunoglobulin (Ig) superfamily and contains three Ig-like domains in its extracellular portion. The gD binding site is located within the first Ig-like domain (V domain) of HveC. We generated a panel of monoclonal antibodies (MAbs) against the ectodomain of HveC. Eleven of these, which detect linear or conformational epitopes within the V domain, were used to map a gD binding site. They allowed the detection of HveC by enzyme-linked immunosorbent assay, Western blotting, and biosensor analysis or directly on the surface of HeLa cells and human neuroblastoma cell lines, as well as simian Vero cells. The anti-HveC V-domain MAbs CK6, CK8, and CK41, as well as the previously described MAb R1.302, blocked HSV entry. Their binding to soluble HveC was blocked by the association of gD with the receptor, indicating that their epitopes overlap a gD binding site. Competition assays on an optical biosensor showed that CK6 and CK8 (linear epitopes) inhibited the binding of CK41 and R1.302 (conformational epitopes) to HveC and vice versa. Epitope mapping showed that CK6 and CK8 bound between residues 80 and 104 of HveC, suggesting that part of the gD binding site colocalizes in the same region.