Enamel rod relations in the developing rat incisor

Crystal misorientation correlates with hardness in tooth enamels

The multi-scale hierarchical structure of tooth enamel enables it to withstand a lifetime of damage without catastrophic failure. While many previous studies have investigated structure-function relationships in enamel, the effects of crystal misorientation on mechanical performance have not been assessed. To address this issue, in the present study, we review previously published polarization-dependent imaging contrast (PIC) maps of mouse and human enamel, and parrotfish enameloid, in which crystal orientations were measured and displayed in every 60-nm-pixel. By combining those previous results with the PIC maps of sheep enamel presented here we discovered that, in all enamel(oid)s, adjacent crystals are slightly misoriented, with misorientation angles in the 0°-30° range, and mean 2°-8°. Within this limited range, misorientation is positively correlated with literature hardness values, demonstrating an important structure-property relation, not previously identified. At greater misorientation angles 8°30°, this correlation is expected to reverse direction, but data from different non-enamel systems, with more diverse crystal misorientations, are required to determine if and where this occurs. STATEMENT OF SIGNIFICANCE: We identify a structure-function relationship in tooth enamels from different species: crystal misorientation correlates with hardness, contributing to the remarkable mechanical properties of enamel in diverse animals.

Quantitative analysis of the core 2D arrangement and distribution of enamel rods in cross-sections of mandibular mouse incisors

Considerable descriptive information about the overall organization of mouse mandibular incisor enamel is available but almost nothing is known about the quantitative characteristics of enamel rod arrangement and distribution in these teeth. This has important implications concerning cell movement during the secretory stage because each ameloblast makes one enamel rod. Knowing how many enamel rods are cut open in a cross-section of the enamel layer could provide insights into understanding the dynamics of how groups of ameloblasts form the enamel layer. In this study, cross-sections of fully mineralized enamel were cut on 24 mandibular mouse incisors, polished and etched, and imaged by scanning electron microscopy in backscatter mode. Montaged maps of the entire enamel layer were made at high magnification and the enamel rod profiles in each map were color-coded based upon rod category. Quantitative analyses of each color layer in the maps were then performed using standard routines available in imagej. The data indicated that that there were on average 7233 ± 575 enamel rod profiles per cross-section in mandibular incisors of 7-week-old mice, with 70% located in the inner enamel layer, 27% located in the outer enamel layer, and 3% positioned near the mesial and lateral cementoenamel junctions. All enamel rod profiles showed progressive increases in tilt angles, some very large in magnitude, from the lateral to mesial sides of the enamel layer, whereas only minor variations in tilt angle were found relative to enamel thickness at given locations across the enamel layer. The decussation angle between alternating rows of rod profiles within the inner enamel layer was fairly constant from the lateral to central labial sides of the enamel layer, but it increased dramatically in the mesial region of the enamel layer. The packing density of all rod profiles decreased from lateral to central labial regions of the enamel layer and then in progressing mesially, decreased slightly (inner enamel, mesial tilt), increased slightly (outer enamel layer) or almost doubled in magnitude (inner enamel, lateral tilt). It was concluded that these variations in rod tilt angle and packing densities are adaptations that allow the tooth to maintain a sharp incisal edge and shovel-shape as renewing segments formed by around 7200 ameloblasts are brought onto the occluding surface of the tooth by continuous renewal.

Calcium orthophosphates (CaPO4): occurrence and properties

The present overview is intended to point the readers' attention to the important subject of calcium orthophosphates (CaPO4). This type of materials is of the special significance for the human beings because they represent the inorganic part of major normal (bones, teeth and antlers) and pathological (i.e., those appearing due to various diseases) calcified tissues of mammals. For example, atherosclerosis results in blood vessel blockage caused by a solid composite of cholesterol with CaPO4, while dental caries and osteoporosis mean a partial decalcification of teeth and bones, respectively, that results in replacement of a less soluble and harder biological apatite by more soluble and softer calcium hydrogenorthophosphates. Therefore, the processes of both normal and pathological calcifications are just an in vivo crystallization of CaPO4. Similarly, dental caries and osteoporosis might be considered as in vivo dissolution of CaPO4. In addition, natural CaPO4 are the major source of phosphorus, which is used to produce agricultural fertilizers, detergents and various phosphorus-containing chemicals. Thus, there is a great significance of CaPO4 for the humankind and, in this paper, an overview on the current knowledge on this subject is provided.

Evolving marine biomimetics for regenerative dentistry

New products that help make human tissue and organ regeneration more effective are in high demand and include materials, structures and substrates that drive cell-to-tissue transformations, orchestrate anatomical assembly and tissue integration with biology. Marine organisms are exemplary bioresources that have extensive possibilities in supporting and facilitating development of human tissue substitutes. Such organisms represent a deep and diverse reserve of materials, substrates and structures that can facilitate tissue reconstruction within lab-based cultures. The reason is that they possess sophisticated structures, architectures and biomaterial designs that are still difficult to replicate using synthetic processes, so far. These products offer tantalizing pre-made options that are versatile, adaptable and have many functions for current tissue engineers seeking fresh solutions to the deficiencies in existing dental biomaterials, which lack the intrinsic elements of biofunctioning, structural and mechanical design to regenerate anatomically correct dental tissues both in the culture dish and in vivo.

Calcium orthophosphates: occurrence, properties, biomineralization, pathological calcification and biomimetic applications

The present overview is intended to point the readers' attention to the important subject of calcium orthophosphates. This type of materials is of special significance for human beings, because they represent the inorganic part of major normal (bones, teeth and antlers) and pathological (i.e., those appearing due to various diseases) calcified tissues of mammals. For example, atherosclerosis results in blood vessel blockage caused by a solid composite of cholesterol with calcium orthophosphates, while dental caries and osteoporosis mean a partial decalcification of teeth and bones, respectively, that results in replacement of a less soluble and harder biological apatite by more soluble and softer calcium hydrogenphosphates. Therefore, the processes of both normal and pathological calcifications are just an in vivo crystallization of calcium orthophosphates. Similarly, dental caries and osteoporosis might be considered an in vivo dissolution of calcium orthophosphates. Thus, calcium orthophosphates hold a great significance for humankind, and in this paper, an overview on the current knowledge on this subject is provided.

Biological synthesis of tooth enamel instructed by an artificial matrix

The regenerative capability of enamel, the hardest tissue in the vertebrate body, is fundamentally limited due to cell apoptosis following maturation of the tissue. Synthetic strategies to promote enamel formation have the potential to repair damage, increase the longevity of teeth and improve the understanding of the events leading to tissue formation. Using a self-assembling bioactive matrix, we demonstrate the ability to induce ectopic formation of enamel at chosen sites adjacent to a mouse incisor cultured in vivo under the kidney capsule. The resulting material reveals the highly organized, hierarchical structure of hydroxyapatite crystallites similar to native enamel. This artificially triggered formation of organized mineral demonstrates a pathway for developing cell fabricated materials for treatment of dental caries, the most ubiquitous disease in man. Additionally, the artificial matrix provides a unique tool to probe cellular mechanisms involved in tissue formation further enabling the development of tooth organ replacements.

Calcium Orthophosphates in Nature, Biology and Medicine

The present overview is intended to point the readers’ attention to the important subject of calcium orthophosphates. These materials are of the special significance because they represent the inorganic part of major normal (bones, teeth and dear antlers) and pathological (i.e. those appearing due to various diseases) calcified tissues of mammals. Due to a great chemical similarity with the biological calcified tissues, many calcium orthophosphates possess remarkable biocompatibility and bioactivity. Materials scientists use this property extensively to construct artificial bone grafts that are either entirely made of or only surface-coated with the biologically relevant calcium ortho-phosphates. For example, self-setting hydraulic cements made of calcium orthophosphates are helpful in bone repair, while titanium substitutes covered by a surface layer of calcium orthophosphates are used for hip joint endoprostheses and as tooth substitutes. Porous scaffolds made of calcium orthophosphates are very promising tools for tissue engineering applications. In addition, technical grade calcium orthophosphates are very popular mineral fertilizers. Thus ere calcium orthophosphates are of great significance for humankind and, in this paper, an overview on the current knowledge on this subject is provided.

Biological and medical significance of calcium phosphates

The inorganic part of hard tissues (bones and teeth) of mammals consists of calcium phosphate, mainly of apatitic structure. Similarly, most undesired calcifications (i.e. those appearing as a result of various diseases) of mammals also contain calcium phosphate. For example, atherosclerosis results in blood-vessel blockage caused by a solid composite of cholesterol with calcium phosphate. Dental caries result in a replacement of less soluble and hard apatite by more soluble and softer calcium hydrogenphosphates. Osteoporosis is a demineralization of bone. Therefore, from a chemical point of view, processes of normal (bone and teeth formation and growth) and pathological (atherosclerosis and dental calculus) calcifications are just an in vivo crystallization of calcium phosphate. Similarly, dental caries and osteoporosis can be considered to be in vivo dissolution of calcium phosphates. On the other hand, because of the chemical similarity with biological calcified tissues, all calcium phosphates are remarkably biocompatible. This property is widely used in medicine for biomaterials that are either entirely made of or coated with calcium phosphate. For example, self-setting bone cements made of calcium phosphates are helpful in bone repair and titanium substitutes covered with a surface layer of calcium phosphates are used for hip-joint endoprostheses and tooth substitutes, to facilitate the growth of bone and thereby raise the mechanical stability. Calcium phosphates have a great biological and medical significance and in this review we give an overview of the current knowledge in this subject.

Biological and medical significance of calcium phosphates

The inorganic part of hard tissues (bones and teeth) of mammals consists of calcium phosphate, mainly of apatitic structure. Similarly, most undesired calcifications (i.e. those appearing as a result of various diseases) of mammals also contain calcium phosphate. For example, atherosclerosis results in blood-vessel blockage caused by a solid composite of cholesterol with calcium phosphate. Dental caries result in a replacement of less soluble and hard apatite by more soluble and softer calcium hydrogenphosphates. Osteoporosis is a demineralization of bone. Therefore, from a chemical point of view, processes of normal (bone and teeth formation and growth) and pathological (atherosclerosis and dental calculus) calcifications are just an in vivo crystallization of calcium phosphate. Similarly, dental caries and osteoporosis can be considered to be in vivo dissolution of calcium phosphates. On the other hand, because of the chemical similarity with biological calcified tissues, all calcium phosphates are remarkably biocompatible. This property is widely used in medicine for biomaterials that are either entirely made of or coated with calcium phosphate. For example, self-setting bone cements made of calcium phosphates are helpful in bone repair and titanium substitutes covered with a surface layer of calcium phosphates are used for hip-joint endoprostheses and tooth substitutes, to facilitate the growth of bone and thereby raise the mechanical stability. Calcium phosphates have a great biological and medical significance and in this review we give an overview of the current knowledge in this subject.

Growth tracks in dental enamel

The present paper evaluates the enamel growth tracks as tools in the chronological mapping of dental development, with special reference to hominids. Dental enamel consists of tightly packed hydroxyapatite crystals organized by differential orientation into a pattern of prisms and interprisms. The crystal organization is probably under the influence of both cellular and physico-chemical factors. The structure of mature enamel testifies to events that took place during enamel formation. The prisms are the fossilized tracks traced out by ameloblasts. The tangential diameter of ameloblasts and the central distance of prisms increase from the enamel-dentine junction to the enamel surface. Available evidence suggests that prism cross-striations are light microscopic expressions of prism varicosities and/or compositional variations, that these are due to a rhythm in enamel formation, and that this rhythm is diurnal. In human enamel the mean daily rate of enamel production is about 3.5 micron, but increases from inner to outer enamel and decreases from incisal/cuspal to cervical enamel. Conclusive evidence has shown that Retzius lines are incremental lines. Evenly spaced Retzius lines probably represent a 6-11 day rhythm in enamel formation, while other Retzius lines may be due to various types of stress. The geometry of the enamel growth tracks and their chronological significance are valuable tools in chronological mapping of dental development and for understanding temporal and spatial patterns in tooth morphogenesis. The taxonomic significance of prism packing patterns, prism decussation and enamel thickness should be clarified through further systematic descriptive research.

Interfacial control of nucleation of calcium carbonate under organized stearic acid monolayers

The nucleation and crystal growth of calcium carbonate from supersaturated bicarbonate solutions in the presence of stearic acid monolayers has been studied by electron microscopy and electron and X-ray diffraction. Whereas rhombohedral crystals of calcite are randomly deposited in the absence of the monolayer, regiospecific crystallization of vaterite florets occurs at the organic surface. The florets develop initially as single crystalline biconvex discs oriented with respect to the negatively charged headgroups of the organic membrane such that the radial axis, which corresponds to the crystallographic [0001] direction, is aligned perpendicular to the monolayer interface. Subsequent radial outgrowth results in the polycrystalline floret morphology. The degree of compression of the monolayer results in significant changes in nucleation. Solid-phase films are highly catalytic and generate vaterite discs with a wide size distribution. In contrast, nucleation on liquid-phase monolayers results in discs of more uniform particle diameter. Increased supersaturation and uncompressed films gave both calcite and vaterite polymorphs. Preferential orientation of the ab vaterite crystal face parallel to the monolayer surface is discussed in terms of the electrostatic accumulation of a Stern layer of Ca ions. Polymorph selectivity is determined by kinetic factors involving charge accumulation and possibly stereochemical recognition between the alignment of the stearic acid carboxylates and the orientation of carbonate anions in the vaterite unit cell. Geometric (epitaxial) matching at the interface is not a primary factor in regulating nucleation.

Organization of crystals in enamel

It has been variously suggested that the organic matrix associated with the mineral phase of enamel is present as either calcified fibrils, central dark lines, peripheral sheaths around hexagonal crystals, or organic ghosts apparently contained within crystal profiles. The most consistent findings confirm the crystal ghost conception. Grid decalcification of nearly mature sectioned enamel and staining revealed hollow, noncrystalline structures whose external measurements were statistically identical to those of the dissolved crystallites, but with internal measurements too small to accommodate the crystallites. To explain these apparent ghosts in view of the incompatibility of ghosts with crystal structure, it has been proposed that the crystallites are not hexagonal in cross-sections and the hexagonal appearance is due to projections of parallelepiped-shaped crystallite segments with cut surfaces that are rhomboidal in shape. Material on the surface of such profiles would project as if it were contained within the profile. Hexagonal forms could not be demonstrated in isolated crystallites examined by transmission electron microscopy, high-resolution scanning electron microscopy, and replicas made of the isolated crystallite preparations examined by transmission electron microscopy. Existing evidence does not rule out the possibility that the noncrystalline profiles represent stain drawn into the holes left by the dissolved crystallites as a result of high capillarity forces.

Protein conformation in rat tooth enamel

Orientated 0.47 nm reflections in X-ray diffraction patterns of developing rat tooth enamel were confirmed using a wide range of specimen preparations and experimental conditions. This indicates that some of the organic matrix proteins adopt a beta-sheet conformation.

Organization of extracellularly mineralized tissues: a comparative study of biological crystal growth

Biological mineralization processes are extremely diverse and, to date, it is an act of faith rather than an established principle that organisms utilize common mechanisms for forming crystals. A systematic analysis of the structural organization, as far as possible at the molecular level, of five different extracellularly mineralized tissues is presented to demonstrate that at least these mineralization processes are all part of the same continuum. The degrees of control exercised over crystal nucleation and crystal growth modulation are the basic variables. The five tissues, extracellularly mineralizing algae, radial and granular foraminifera, mammalian bone, mammalian enamel, and mollusk shell nacre, probably span the entire spectrum. Their crystal shapes, sizes, and the relations between the mineral phase and the organic phase, are primarily used to assess probable degrees of control exercised over crystal nucleation and modulation. Three different types of nucleation processes can be recognized: nonspecific, stereochemical, and epitaxial. Modulation of crystal growth after nucleation is either absent, achieved by adsorption of macromolecules onto specific crystal faces, or occurs by the prepositioning of matrix surfaces which interrupt crystal growth. The tissues in which active control is exercised over crystal growth all contain similar types of acidic matrix macromolecules. Significantly, the framework matrix macromolecules are all quite different and hence probably perform some tissue-specific functions. The study shows that there is a common basis for understanding these mineralization processes which is reflected in the nature of the protein-crystal interactions which occur in each tissue.