Synthesis in microemulsion and characterization of stimuli-responsive polyelectrolytes and polyampholytes based on N-isopropylacrylamide

Rational Design and Development of Polymeric Nanogels as Protein Carriers

Proteins have gained significant attention as potential therapeutic agents owing to their high specificity and reduced toxicity. Nevertheless, their clinical utility is hindered by inherent challenges associated with stability during storage and after in vivo administration. To overcome these limitations, polymeric nanogels (NGs) have emerged as promising carriers. These colloidal systems are capable of efficient encapsulation and stabilization of protein cargoes while improving their bioavailability and targeted delivery. The design of such delivery systems requires a comprehensive understanding of how the synthesis and formulation processes affect the final performance of the protein. This review highlights critical aspects involved in the development of NGs for protein delivery, with specific emphasis on loading strategies and evaluation techniques. For example, factors influencing loading efficiency and release kinetics are discussed, along with strategies to optimize protein encapsulation through protein-carrier interactions to achieve the desired therapeutic outcomes. The discussion is based on recent literature examples and aims to provide valuable insights for researchers working toward the advancement of protein-based therapeutics.

Temperature and Salt Responsive Amphoteric Nanogels Based on N-Isopropylacrylamide, 2-Acrylamido-2-methyl-1-propanesulfonic Acid Sodium Salt and (3-Acrylamidopropyl) Trimethylammonium Chloride

Polyampholyte nanogels based on N-isopropylacrylamide (NIPAM), (3-acrylamidopropyl) trimethylammonium chloride (APTAC) and 2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt (AMPS) were synthesized via conventional redox-initiated free radical copolymerization. The resultant nanogels of various compositions, specifically [NIPAM]:[APTAC]:[AMPS] = 90:5:5; 90:7.5:2.5; 90:2.5:7.5 mol.%, herein abbreviated as NIPAM₉₀-APTAC₅-AMPS₅, NIPAM₉₀-APTAC_7.5-AMPS_2.5 and NIPAM₉₀-APTAC_2.5-AMPS_7.5, were characterized by a combination of ¹H NMR and FTIR spectroscopy, TGA, UV-Vis, DLS and zeta potential measurements. The temperature and salt-responsive properties of amphoteric nanogels were studied in aqueous and saline solutions in a temperature range from 25 to 60 °C and at ionic strengths (μ) of 10^-3 to 1M NaCl. Volume phase transition temperatures (VPTT) of the charge-balanced nanogel were found to reach a maximum upon the addition of salt, whereas the same parameter for the charge-imbalanced nanogels exhibited a sharp decrease at higher saline concentrations. A wide bimodal distribution of average hydrodynamic sizes of nanogel particles had a tendency to transform to a narrow monomodal peak at elevated temperatures and higher ionic strengths. According to the DLS results, increasing ionic strength results in the clumping of nanogel particles.

Synthesis of water-soluble ionic terpolymers by inverse microemulsion and solution polymerization methods

The synthesis of terpolymers can lead to very interesting combinations of monomers, which can affect the solubility of the polymer, its thermal stability or resistance in saline aqueous media. Free-radical inverse microemulsion and solution polymerization techniques were used to prepare water-soluble acrylamide-N-vinylpyrrolidone-(vinylbenzyl)trimethylammonium chloride terpolymers. The formulation of the polymerizable microemulsion was optimized by using the screening of surfactant percentage and HLB concept. The influence of synthesis temperature on the terpolymer composition and molecular weight was investigated. The reactions were carried out at 60, 70, and 75 °C for the microemulsion technique and at 40, 50, and 55 °C for the solution polymerization technique. The reaction products from both processes were water-soluble polymers, and the two techniques reached high conversions and molecular masses. Maximal molecular weights were displayed by terpolymers prepared by the solution method at 40 °C (959, 840 g mol⁻¹) and the inverse microemulsion method at 60 °C (795, 994 g mol⁻¹). According to NMR analysis, the highest amount of (vinylbenzyl) trimethylammonium chloride was incorporated into the terpolymer structure by the inverse microemulsion method. In contrast, the solution method yielded higher contents of acrylamide and N-vinylpyrrolidone. The viscosity properties of the terpolymers in aqueous solutions were directly correlated to their molecular weight and synthesis conditions.

Terpolymers based on acrylamide, N-vinylpyrrolidone and (vinylbenzyl)trimethylammonium chloride (VBTA) were synthesized using inverse microemulsion and solution methods. The microemulsion promoted the incorporation of VBTA in the terpolymer structure.

Nanogels: A novel approach in antimicrobial delivery systems and antimicrobial coatings

The implementation of nanotechnology to develop efficient antimicrobial systems has a significant impact on the prospects of the biomedical field. Nanogels are soft polymeric particles with an internally cross-linked structure, which behave as hydrogels and can be reversibly hydrated/dehydrated (swollen/shrunken) by the dispersing solvent and external stimuli. Their excellent properties, such as biocompatibility, colloidal stability, high water content, desirable mechanical properties, tunable chemical functionalities, and interior gel-like network for the incorporation of biomolecules, make them fascinating in the field of biological/biomedical applications. In this review, various approaches will be discussed and compared to the newly developed nanogel technology in terms of efficiency and applicability for determining their potential role in combating infections in the biomedical area including implant-associated infections.

Hydrogel Nanoparticle as a Functional Coating Layer in Biosensing, Tissue Engineering, and Drug Delivery

The development of functional coating materials has resulted in many breakthroughs in the discovery of energy, environmental, and biomedical applications. Responsive polymeric hydrogels are an example of smart coating materials due to their stimuli-responsive characteristics upon changes in their local environment. This review focuses on the introduction of hydrogel nanoparticles and their applications in functional layers as responsive coating materials. Hydrogels are explained by the composition of cross-links and monomers used for preparation. In particular, an important class of responsive hydrogels, that is, nanosized hydrogel particles (nanogels), are described for thee synthesis, modification, and application in assembly of functional coating layers. Finally, nanogel functional layers for biological applications will be discussed with recent advances in biosensing, tissue engineering, and drug delivery.

Composite Nanogels Based on Zeolite-Poly(ethylene glycol) Diacrylate for Controlled Drug Delivery

This study presents the design of novel composites nanogels, based on poly(ethylene glycol) diacrylate and natural zeolite particles, that are able to act as materials with controlled drug delivery properties. Natural zeolite‒nanogels composite, with varying zeolite contents, were obtained by an inverse mini-emulsion technique and loaded with 5-fluorouracil, a widely used chemotherapeutic drug. Herein, the possibility of adjusting final properties by means of modifying the preparation conditions was investigated. The prepared composite nanogels are characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). In light of this tunable drug-loading capability, swelling behaviour, and cytotoxicity, these composite nanogels could be highly attractive as drug reservoirs.

Tunable clustering of magnetic nanoparticles in microgels: enhanced magnetic relaxivity by modulation of network architecture

In the present work we used microgels as colloidal containers for the loading of hydrophobic magnetic nanoparticles using the solvent exchange method. We varied systematically two parameters: (i) the crosslinking degree of microgels (1-4.5 mol% crosslinker) and (ii) loading of hydrophobic magnetite nanoparticles (d = 7 nm) in microgels (2-10 wt%). The experimental data show that the interplay between these two parameters provides efficient control over the clustering of magnetic nanoparticles in the microgel structure. Transverse magnetization relaxation measurements indicate that the formation of nanoparticle clusters in microgels induces non-linear enhancement of the relaxivity with the increase of nanoparticle loading in microgels. The results suggest that the modulation of the microgel network architecture can be efficiently applied to trigger self-assembly processes inside microgels and design hybrid colloids with unusual morphologies and properties.

Nanogel Carrier Design for Targeted Drug Delivery

Polymer-based nanogel formulations offer features attractive for drug delivery, including ease of synthesis, controllable swelling and viscoelasticity as well as drug loading and release characteristics, passive and active targeting, and the ability to formulate nanogel carriers that can respond to biological stimuli. These unique features and low toxicity make the nanogels a favorable option for vascular drug targeting. In this review, we address key chemical and biological aspects of nanogel drug carrier design. In particular, we highlight published studies of nanogel design, descriptions of nanogel functional characteristics and their behavior in biological models. These studies form a compendium of information that supports the scientific and clinical rationale for development of this carrier for targeted therapeutic interventions.

Preparation and characterization of nanosized P(NIPAM-MBA) hydrogel particles and adsorption of bovine serum albumin on their surface

Thermosensitive polymer hydrogel particles with size varying from 480 to 620 nm were prepared through precipitation copolymerization of N-isopropylacrylamide with N,N'-methylenebisacrylamide (MBA) in water with ammonium persulfate as the initiator. Only polymer hydrogels without any coagula were obtained when MBA concentration in the monomer mixture was kept between 2.5 and 10.0 wt%; with increased MBA concentration, the monomer conversion was enhanced, the size of the hydrogels was increased, and their shrinking was lessened when heated from 25°C to 40°C. Bovine serum albumin adsorption on the surface of the hydrogels of different MBA content was measured at different pH levels and under different temperatures. The results demonstrated that the adsorption of the protein on the hydrogels could be controlled by adjusting the pH, the temperature of adsorption, and the crosslinking in the hydrogels. The results were interpreted, and the mechanisms of the polymerization were proposed.

Cellular uptake of functional nanogels prepared by inverse miniemulsion ATRP with encapsulated proteins, carbohydrates, and gold nanoparticles

Atom transfer radical polymerization (ATRP) was used to produce a versatile drug delivery system capable of encapsulating a range of molecules. Inverse miniemulsion ATRP permitted the synthesis of biocompatible and uniformly cross-linked poly(ethylene oxide)-based nanogels entrapping gold nanoparticles, bovine serum albumin, rhodamine B isothiocyanate-dextran, or fluoresceine isothiocyanate-dextran. These moieties were entrapped to validate several biological outcomes and to model delivery of range of molecules. Cellular uptake of nanogels was verified by transmission electron microscopy, gel electrophoresis, Western blotting, confocal microscopy, and flow cytometry. Fluorescent colocalization of nanogels with a fluorophore-conjugated antibody for clathrin indicated clathrin-mediated endocytosis. Furthermore, internalization of nanogels either with or without GRGDS cell attachment-mediating peptides was quantified using flow cytometry. After 45 min of incubation, the uptake of unmodified FITC-Dx-loaded nanogels was 62%, whereas cellular uptake increased to >95% with the same concentration of GRGDS-modified FITC-Dx nanogels. In addition, a spheroidal coculture of human umbilical vascular endothelial cells (HUVECs) and human mesenchymal stem cells (hMSCs) validated cell endocytosis. Application of ATRP enabled the synthesis of a functionalized drug delivery system with a uniform network that is capable of encapsulating and delivering inorganic, organic, and biological molecules.

Synthesis and Biodegradation of Nanogels as Delivery Carriers for Carbohydrate Drugs

Biodegradable nanogels loaded with rhodamine B isothiocyanate-dextran (RITC-Dx) as a model for water-soluble biomacromolecular drugs were prepared using atom-transfer radical polymerization (ATRP) in a cyclohexane inverse miniemulsion in the presence of a disulfide-functionalized dimethacrylate cross linker. UV-vis spectroscopy was used to characterize the extent of incorporation of RITC-Dx into the nanogels. The loading efficiency of RITC-Dx into the nanogels exceeded 80%. These nanogels were degraded into polymeric sols in a reducing environment to release the encapsulated carbohydrate drugs. The released carbohydrate biomolecules specifically interacted with concanavalin A in water, suggesting that the biodegradable nanogels could be used as carriers to deliver carbohydrate drugs that can be released upon degradation to bind to pathogens based on lectins.

Biocompatible, Polyampholyte Microgel Particles

Biocompatible, polyampholyte microgel particles have been prepared by the acid hydrolysis of t-butyl groups within (2-diethylamino)ethyl methacrylate-co-t-butyl methacrylate microgel particles to give (2-diethylamino)ethyl methacrylate-co-methacrylic acid microgel particles. The hydrodynamic diameter and electrophoretic mobility of both the pre-hydrolyzed and post-hydrolyzed microgel particles have been investigated as a function of pH for three microgel dispersions differing in their monomer compositions. The swelling properties and isoelectric point pH are shown to depend on the monomer composition.

Self-assembled, thermosensitive micelles of a star block copolymer based on PMMA and PNIPAAm for controlled drug delivery

A four-arm star block copolymer, comprised of a hydrophobic PMMA arm and an average of three hydrophilic poly(N-isopropylacrylamide) (PNIPAAm) arms were designed and synthesized from the molecular level. The amphiphilic star block copolymer is capable of self-assembling into micelles in water, which was confirmed by FT-IR, (1)H NMR and fluorescence spectroscopy. Transmission electron microscopy images showed that these nanoparticles were regularly spherical in shape. The micelles showed reversible dispersion/aggregation in response to temperature cycles through an outer polymer shell lower critical solution temperature (LCST) for PNIPAAm at around 34 degrees C, observed by optical absorbance measurements. Resulted polymeric micelles loaded with prednisone acetate showed a much improved drug release behavior due to the special micellar structure.

Self-assembled thermoresponsive micelles of poly(N-isopropylacrylamide-b-methyl methacrylate)

To achieve a combination of spatial specificity in a passive manner with a stimuli-response targeting mechanism, a temperature-responsive polymeric micelle was prepared using block copolymers of poly(N-isopropylacrylamide-b-methyl methacrylate) (PNIPAAm-b-PMMA). The critical micelle concentration of amphiphilic block copolymers in aqueous solution was determined by fluorescence spectroscopy using pyrene as a fluorescence probe. Transmission electron microscopy images showed that these nanoparticles were regularly spherical in shape. Micelle size determined by size analysis was around 190 nm. The micelles showed reversible dispersion/aggregation in response to temperature cycles through an outer polymer shell lower critical solution temperature (LCST) for PNIPAAm at around 33 degrees C, observed by optical absorbance measurements and dynamic light scattering (DLS). The anti-inflammation drug prednisone acetate was loaded as the model drug in the polymeric nanoparticles. In vitro release behavior of prednisone acetate was investigated, which showed a dramatic thermoresponsive fast/slow switching behavior according to the temperature-responsive structural changes of a micellar shell structure. The reversible and sensitive thermoresponse of this micelle might provide opportunities to construct a novel drug delivery system in conjunction with localized hyperthermia.