Three-dimensional structure of membrane proteins determined by two-dimensional crystallization, electron cryomicroscopy, and image analysis

Mitochondrial Connexins and Mitochondrial Contact Sites with Gap Junction Structure

Mitochondria contain connexins, a family of proteins that is known to form gap junction channels. Connexins are synthesized in the endoplasmic reticulum and oligomerized in the Golgi to form hemichannels. Hemichannels from adjacent cells dock with one another to form gap junction channels that aggregate into plaques and allow cell-cell communication. Cell-cell communication was once thought to be the only function of connexins and their gap junction channels. In the mitochondria, however, connexins have been identified as monomers and assembled into hemichannels, thus questioning their role solely as cell-cell communication channels. Accordingly, mitochondrial connexins have been suggested to play critical roles in the regulation of mitochondrial functions, including potassium fluxes and respiration. However, while much is known about plasma membrane gap junction channel connexins, the presence and function of mitochondrial connexins remain poorly understood. In this review, the presence and role of mitochondrial connexins and mitochondrial/connexin-containing structure contact sites will be discussed. An understanding of the significance of mitochondrial connexins and their connexin contact sites is essential to our knowledge of connexins' functions in normal and pathological conditions, and this information may aid in the development of therapeutic interventions in diseases linked to mitochondria.

The projection structure of Kch, a putative potassium channel in Escherichia coli, by electron crystallography

The kch gene, the only potassium channel gene in Escherichia coli, has the property to express both full-length Kch and its cytosolic domain (RCK) due to a methionine at position 240. The RCK domains are believed to form an octameric ring structure and regulate the gating of the potassium channels after having bound certain ligands. Several different gating ring structures have been reported for the soluble RCK domains, however, these were studied isolated from their transmembrane parts. We previously reported an octameric structure of Kch in solution by electron microscopy and single particle reconstruction, composed of two tetrameric full-length proteins through RCK interaction. To exclude the effect of the detergent, we have now performed an electron crystallographic study of the full-length Kch in membrane bound form. Well-ordered two-dimensional crystals were grown in a natural phospholipid environment. A projection map merged from the fifteen best images extended to 6Å resolution. The c12 two-sided plane group of the two-dimensional crystals showed that Kch crystallized as two symmetrically related overlapping layers. The arrangement suggests that the two layers of RCK domains are shifted with respect to each other and the RCK octameric gating ring of Kch does not form under the crystallization condition.

Lipid monolayer and sparse matrix screening for growing two-dimensional crystals for electron crystallography: methods and examples

Electron microscopy provides an efficient method for rapidly assessing whether a solution of macromolecules is homogeneous and monodisperse. If the macromolecules can be induced to form two-dimensional crystals that are a single layer in thickness, then electron crystallography of frozen-hydrated crystals has the potential of achieving three-dimensional density maps at sub-nanometer or even atomic resolution. Here we describe the lipid monolayer and sparse matrix screening methods for growing two-dimensional crystals and present successful applications to soluble macromolecular complexes: carboxysome shell proteins and HIV CA, respectively. Since it is common to express recombinant proteins with poly-His tags for purification by metal affinity chromatography, the monolayer technique using bulk lipids doped with Ni(2+) lipids has the potential for broad application. Likewise, the sparse matrix method uses screening conditions for three-dimensional crystallization and is therefore of broad applicability.

Two-dimensional crystals of carboxysome shell proteins recapitulate the hexagonal packing of three-dimensional crystals

Bacterial microcompartments (BMCs) are large intracellular bodies that serve as simple organelles in many bacteria. They are proteinaceous structures composed of key enzymes encapsulated by a polyhedral protein shell. In previous studies, the organization of these large shells has been inferred from the conserved packing of the component shell proteins in two-dimensional (2D) layers within the context of three-dimensional (3D) crystals. Here, we show that well-ordered, 2D crystals of carboxysome shell proteins assemble spontaneously when His-tagged proteins bind to a monolayer of nickelated lipid molecules at an air-water interface. The molecular packing within the 2D crystals recapitulates the layered hexagonal sheets observed in 3D crystals. The results reinforce current models for the molecular design of BMC shells.

Two-dimensional crystallization of integral membrane proteins for electron crystallography

Although membrane proteins make up 30% of the proteome and are a common target for therapeutic drugs, determination of their atomic structure remains a technical challenge. Electron crystallography represents an alternative to the conventional methods of X-ray diffraction and NMR and relies on the formation of two-dimensional crystals. These crystals are produced by reconstituting purified, detergent-solubilized membrane proteins back into the native environment of a lipid bilayer. This chapter reviews methods for producing two-dimensional crystals and for screening them by negative stain electron microscopy. In addition, we show examples of the different morphologies that are commonly obtained and describe basic image analysis procedures that can be used to evaluate their promise for structure determination by cryoelectron microscopy.

Single particle electron microscopy

Electron microscopy (EM) in combination with image analysis is a powerful technique to study protein structures at low, medium, and high resolution. Since electron micrographs of biological objects are very noisy, improvement of the signal-to-noise ratio by image processing is an integral part of EM, and this is performed by averaging large numbers of individual projections. Averaging procedures can be divided into crystallographic and non-crystallographic methods. The crystallographic averaging method, based on two-dimensional (2D) crystals of (membrane) proteins, yielded in solving atomic protein structures in the last century. More recently, single particle analysis could be extended to solve atomic structures as well. It is a suitable method for large proteins, viruses, and proteins that are difficult to crystallize. Because it is also a fast method to reveal the low-to-medium resolution structures, the impact of its application is growing rapidly. Technical aspects, results, and possibilities are presented.

Projection Structure of Full Length Connexin 43 by Electron Cryo-Crystallography

We previously used electron cryo-crystallography to determine the three-dimensional structure of recombinant gap junction channels formed by a C-terminal truncation mutant of Cx43 (11). The dodecameric channel is formed by the end-to-end docking of two hexameric connexons, each comprised of 24 transmembrane alpha-helices. We have now generated two-dimensional crystals of the recombinant, full-length channel, as well as crystals in which the C-tail has been completely removed by trypsin digestion. Projection density maps at 7.5 A resolution closely resemble our previous analysis of the C-terminal truncation mutant (9). A difference map between the full length and trypsin-treated channels suggests that there are small but significant shifts in protein density upon removal of the C-tail.

Oligomeric structure of colicin ia channel in lipid bilayer membranes

Colicin Ia is a soluble, harpoon-shaped bacteriocin which translocates across the periplasmic space of sensitive Escherichia coli cell by parasitizing an outer membrane receptor and forms voltage-gated ion channels in the inner membrane. This process leads to cell death, which has been thought to be caused by a single colicin Ia molecule. To directly visualize the three-dimensional structure of the channel, we generated two-dimensional crystals of colicin Ia inserted in lipid-bilayer membranes and determined a approximately 17 three-dimensional model by electron crystallography. Supported by velocity sedimentation, chemical cross-linking and single-particle image analysis, the three-dimensional structure is a crown-shaped oligomer enclosing a approximately 35 A-wide extrabilayer vestibule. Our study suggests that lipid insertion instigates a global conformational change in colicin Ia and that more than one molecule participates in the channel architecture with the vestibule, possibly facilitating the known large scale peptide translocation upon channel opening.

Biochemical and structural analysis of bacterial O-antigen chain length regulator proteins reveals a conserved quaternary structure

Lipopolysaccharide (LPS) is a major component of the Gram-negative outer membrane and is an important virulence determinant. The O-antigen polysaccharide of the LPS molecule provides protection from host defenses, and the length of O-antigen chains plays a pivotal role. In the Wzy-dependent O-antigen biosynthesis pathway, the integral inner membrane protein Wzz determines the O-antigen chain length. How these proteins function is currently unknown, but the hypothesis includes activities such as a "molecular ruler" or a "molecular stopwatch," and other possibilities may exist. Wzz homologs are membrane proteins with two transmembrane helices that flank a large periplasmic domain. Recent x-ray crystallographic studies of the periplasmic portions of Wzz proteins found multiple oligomeric forms, with quaternary structures favoring the "molecular ruler" interpretation. Here, we have studied full-length Wzz proteins with the transmembrane portions embedded in lipid membranes. Using electron microscopy and image analysis we find a unique hexameric state rather than differing oligomeric forms. The data suggest that in vivo Wzz proteins determine O-antigen chain length via subtle structure-function relationships at the level of primary, secondary, or tertiary structure within the context of a hexameric complex.

Electron microscopy of integrins

Integrins are a family of heterodimeric, cell-surface receptors that mediate interactions between the cytoskeleton and the extracellular matrix. We have used electron microscopy and single-particle image analysis combined with molecular modeling to investigate the structures of the full-length integrin alpha(IIb)beta(3) and the ectodomain of alpha(V)beta(3) in a complex with fibronectin. The full-length integrin alpha(IIb)beta(3) is purified from human platelets by ion exchange and gel filtration chromatography in buffers containing the detergent octyl-beta-D-glucopyranoside, whereas the recombinant ectodomain of alpha(V)beta(3) is soluble in aqueous buffer. Transmission electron microscopy is performed either in negative stain, where the protein is embedded in a heavy metal such as uranyl acetate, or in the frozen-hydrated state, where the sample is flash-frozen such that the buffer is vitrified and native conditions are preserved. Individual integrin particles are selected from low-dose micrographs, either by manual identification or an automated method using a cross-correlation search of the micrograph against a set of reference images. Due to the small size of integrin heterodimers (approximately 250 kDa) and the low electron dose required to minimize beam damage, the signal-to-noise level of individual particles is quite low, both by negative-stain electron microscopy and electron cryomicroscopy. Consequently, it is necessary to average many particle images with equivalent views. The particle images are subjected to reference-free alignment and classification, in which the particles are aligned to a common view and further grouped by statistical methods into classes with common orientations. Assessment of the structure from a set of two-dimensional averaged projections is often difficult, and a further three-dimensional (3D) reconstruction analysis is performed to classify each particle as belonging to a specific projection from a single 3D model. The 3D reconstruction algorithm is an iterative projection-matching routine in which the classified particles are used to construct a new, 3D map for the next iteration. Docking of known high-resolution structures of individual subdomains within the molecular envelope of the 3D EM map is used to derive a pseudoatomic model of the integrin complex. This approach of 3D EM image analysis and pseudoatomic modeling is a powerful strategy for exploring the structural biology of transmembrane signaling by integrins because it is likely that multiple conformational states will be difficult to crystallize, whereas the different states should be amenable to electron cryomicroscopy.

Assembly of Acanthamoeba Myosin-II Minifilaments. Model of Anti-parallel Dimers Based on EM and X-ray Diffraction of 2D and 3D Crystals

Current models suggest that the first step in the assembly of Acanthamoeba myosin-II is anti-parallel dimerization of the coiled-coil tails with an overlap of 15 nm. Sedimentation equilibrium experiments showed that a construct containing the last 15 heptads and the non-helical tailpiece of the myosin-II tail (15T) forms dimers. To examine the structure of the 15T dimer, we grew 3D and 2D crystals suitable for X-ray diffraction and electron image analysis, respectively. For both conditions, crystals formed in related space and plane groups with similar unit cells (a=87.7 A, b=64.8 A, c=114.9 A, beta=108.0 degrees). Inspection of the X-ray diffraction pattern and molecular replacement analysis revealed the orientation of the coiled-coils in the unit cell. A 3D density map at 15A in-plane resolution derived from a tilt series of electron micrographs established the solvent content of the 3D crystals (75%, v/v), placed the coiled-coil molecules at the approximate translation in the unit cell, and revealed the symmetry relationships between molecules. On the basis of the low-resolution 3D structure, biochemical constraints, and X-ray diffraction data, we propose a model for myosin interactions in the anti-parallel dimer of coiled-coils that guide the first step of myosin-II assembly.

Heterologous expression of the modified coat protein of Cowpea chlorotic mottle bromovirus results in the assembly of protein cages with altered architectures and function

We have developed methods for producing viral-based protein cages in high yield that are amenable to genetic modification. Expression of the structural protein of Cowpea chlorotic mottle bromovirus (CCMV) using the yeast-based Pichia pastoris heterologous expression system resulted in the assembly of particles that were visibly indistinguishable from virus particles produced in the natural host. We have shown that a collection of non-infectious CCMV coat protein mutants expressed in the P. pastoris system assemble into viral protein cages with altered architectures and function. This provides an alternative to other heterologous expression systems for production of viral structural proteins in which expression has resulted in unassembled cages. Heterologous expression in P. pastoris further enhances the development of viral-based protein cages as biotemplates for nanotechnology and for future studies examining details of icosahedral virus assembly.

3-d reconstruction of 2-D crystals in real space

A new algorithm for three-dimensional reconstruction of two-dimensional crystals from projections is presented, and its applicability to biological macromolecules imaged using transmission electron microscopy (TEM) is investigated. Its main departures from the traditional approach is that it works in real space, rather than in Fourier space, and it is iterative. This has the advantage of making it convenient to introduce additional constraints (such as the support of the function to be reconstructed, which may be known from alternative measurements) and has the potential of more accurately modeling the TEM image formation process. Phantom experiments indicate the superiority of the new approach even without the introduction of constraints in addition to the projection data.

Visualization of the target-membrane-inserted fusion protein of Semliki Forest virus by combined electron microscopy and crystallography

Semliki Forest virus enters cells by receptor-mediated endocytosis. The acidic environment of the endosome triggers a membrane fusion reaction that is mediated by the E1 glycoprotein. During fusion, E1 rearranges from an E1/E2 heterodimer to a highly stable, membrane-inserted E1 homotrimer (E1HT). In this study, we analyzed E1HT by a combination of electron cryomicroscopy, electron crystallography of negatively stained 2D crystals, and fitting of the available X-ray structure of the monomeric E1 ectodomain into the resulting 3D reconstruction. The visualized E1HT reveals that the ectodomain has reoriented vertically and inserted the distal tip of domain II into the lipid bilayer. Our data allow the visualization of a viral fusion protein inserted in its target membrane and demonstrate that insertion is a cooperative process, resulting in rings composed of five to six homotrimers.

The highly conserved Gln49 and Ser50 of mammalian connexin43 are present in chick connexin43 and essential for functional gap junction channels

In an attempt to compare the regulation of chick connexin43 channels to those of mammalian connexin43, we found that the nucleotide sequence reported for chick connexin43 differs from that of the chick connexin gene by two codons that had been entered as histidine49 (H49) and valine50 (V50) (accession no. M29003), but are in fact glutamine49 (Q49) and serine50 (S50). Neuro2A cells were transfected with corrected wild-type (Q49/S50) chick connexin43 (accession no. AF233738), the double-replacement Q49H/S50V connexin43, or the single replacement of Q49H or S50V. All clones had gap junctions in membrane based on immunocytochemistry and immunoblots of the triton-resistant membrane fraction. Wild-type transfectants had three conductance states with a predominant channel conductance of 85 +/- 5 pS. Cells producing the Q49H-Cx43 or the double-replacement Q49H/S50V-Cx43 protein had no detectable connexin43 channels. In contrast, cells expressing S50V-Cx43 gap junctions had channels with reduced conductances (75 +/- 8 pS) compared to wild-type controls. Low or high pH of the bathing solution had no effect on the Q49H-Cx43 channels. We conclude that glutamine49 is important for channel function, and replacement of this residue with histidine most likely distorts secondary structure of the first extracellular loop, possibly by changing the orientation of conserved cysteines, and this inhibits channel function. The S50V substitution may also cause similar but less severe structural changes.

3-Dimensional structure of membrane-bound coagulation factor VIII: modeling of the factor VIII heterodimer within a 3-dimensional density map derived by electron crystallography

Despite recent studies, the organization of coagulation factor VIII (FVIII) on a phospholipid (PL) membrane is not known in detail. Thus, 2-dimensional (2D) crystals of human FVIII lacking the B domain were prepared for electron microscopy onto negatively charged PL monolayers. The 3-dimensional (3D) density map of the PL-bound FVIII protein was calculated at 1.5 nm. Existing atomic data and models for FVIII domains were fitted unambiguously within the 3D density map of the molecule. FVIII domains arrangement followed a compact spiral organization with the A3 domains in close association with the C1 and C2 domains near the PL surface. Viewed toward the membrane the A domains' heterotrimer is oriented side-on with the pseudo-3-fold axis almost parallel to the PL surface and A1 fully covering C1. The C2 domain is partially overlapped by the A2 domain of an adjacent molecule in the 2D crystal, favoring close packing. Viewed parallel to the membrane, C2 is slightly inclined to the PL surface covering an area of 12 nm(2). Four C2 loops are embedded within the lipid monolayer at about 0.7 to 1.0 nm depth. C1 forms almost a right angle with C2, its long axis nearly parallel to the membrane. The proposed structure for membrane-bound FVIII results from modeling of the FVIII domains within a 3D density map obtained from electron crystallography and accords with the main biochemical and structural information known to date. A model is proposed for FVIIIa and factor IXa assembly within the membrane-bound factor X-activating complex. (Blood. 2002;99:1215-1223)

Isolation and characterization of gap junctions from tissue culture cells

The purification of membrane proteins in a form and amount suitable for structural or biochemical studies still remains a great challenge. Gap junctions have long been studied using electron microscopy and X-ray diffraction. However, only a limited number of proteins in the connexin family have been amenable to protein or membrane purification techniques. Molecular biology techniques for expressing large gap junctions in tissue culture cells combined with improvements in electron crystallography have shown great promise for determining the channel structure to better than 10 A resolution. Here, we have isolated two-dimensional (2D) gap junction crystals from HeLa Cx26 transfectants. This isoform has never been isolated in large fractions from tissues. We characterize these preparations by SDS-PAGE, Western blotting, negative stain electron microscopy and atomic force microscopy. In our preparations, the Cx26 is easily detected in the Western blots and we have increased expression levels so that connexin bands are visible on SDS-PAGE gels. Preliminary assessment of the samples by electron cryo-microscopy shows that these 2D crystals diffract to at least 22 A. Atomic force microscopy of these Cx26 gap junctions show exquisite surface modulation at the extracellular surface in force dissected gap junctions. We also applied our protocol to cell lines such as NRK cells that express endogenous Cx43 and NRK and HeLa cell lines transfected with exogenous connexins. While the gap junction membrane channels are recognizable in negatively stained electron micrographs, these lattices are disordered and the gap junction plaques are smaller. SDS-PAGE and Western blotting revealed expression of connexins, but at a lower level than with our HeLa Cx26 transfectants. Therefore, the purity and morphology of the gap junction plaques depends the size and abundance of the gap junctions in the cell line itself.

Three-dimensional structure of an invertebrate rhodopsin and basis for ordered alignment in the photoreceptor membrane

Invertebrate rhodopsins activate a G-protein signalling pathway in microvillar photoreceptors. In contrast to the transducin-cyclic GMP phosphodiesterase pathway found in vertebrate rods and cones, visual transduction in cephalopod (squid, octopus, cuttlefish) invertebrates is signalled via Gq and phospholipase C. Squid rhodopsin contains the conserved residues of the G-protein coupled receptor (GPCR) family, but has only 35% identity with mammalian rhodopsins. Unlike vertebrate rhodopsins, cephalopod rhodopsin is arranged in an ordered lattice in the photoreceptor membranes. This organization confers sensitivity to the plane of polarized light and also provides the optimal orientation of the linear retinal chromophores in the cylindrical microvillar membranes for light capture. Two-dimensional crystals of squid rhodopsin show a rectilinear arrangement that is likely to be related to the alignment of rhodopsins in vivo.Here, we present a three-dimensional structure of squid rhodopsin determined by cryo-electron microscopy of two-dimensional crystals. Docking the atomic structure of bovine rhodopsin into the squid density map shows that the helix packing and extracellular plug structure are conserved. In addition, there are two novel structural features revealed by our map. The linear lattice contact appears to be made by the transverse C-terminal helix lying on the cytoplasmic surface of the membrane. Also at the cytoplasmic surface, additional density may correspond to a helix 5-6 loop insertion found in most GPCRs relative to vertebrate rhodopsins. The similarity supports the conservation in structure of rhodopsins (and other G-protein-coupled receptors) from phylogenetically distant organisms. The map provides the first indication of the structural basis for rhodopsin alignment in the microvillar membrane.

Electron cryomicroscopy methods

Electron cryomicroscopy methods comprise a rapidly expanding field providing insights into the structure and function of biological macromolecules and their supramolecular assemblies. The 3.8 A resolution structure of the membrane protein aquaporin, a view of the herpesvirus capsid at 8.5 A and the 10 A resolution structure of the spliceosomal U1 small nuclear ribonucleoprotein complex are three outstanding examples emphasizing the versatility of this technique.

Two-dimensional crystallogenesis of transmembrane proteins

Two-dimensional crystallogenesis is a crucial step in the long road that leads to the determination of macromolecules structure via electron crystallography. The necessity of having large and highly ordered samples can hold back the resolution of structural works for a long time, and this, despite improvements made in electron microscopes or image processing. Today, finding good conditions for growing two-dimensional crystals still rely on either "biocrystallo-cooks" or on lucky ones. The present review presents the field by first describing the different crystals that one can encounter and the different crystallisation methods used. Then, the effects of different components (such as protein, lipids, detergent, buffer, and temperature) and the different methods (dialysis, hydrophobic adsorption) are discussed. This discussion is punctuated by correspondences made to the world of three-dimensional crystallogenesis. Finally, a guide for setting up 2D crystallogenesis experiments, built on the discussion mentioned before, is proposed to the reader. More than giving recipes, this review is meant to open up the discussions in this field.

Recent developments in cryo-electron microscopy reconstruction of single particles

Cryo-electron microscopy and single-particle 3D image reconstruction techniques have been used to examine a broad spectrum of samples ranging from 500 kDa protein complexes to large subcellular organelles. The attainable resolution has improved rapidly over the past few years. Structures of both symmetric and asymmetric assemblies at approximately 7.5 A have been reported. Together with X-ray crystallography, three-dimensional cryo-electron microscopy reconstruction has provided important insights into the function of many biological systems in their native biochemical contexts.

Conformational changes in the cytochrome b6f complex induced by inhibitor binding

Binding of stigmatellin, an inhibitor of the Q(o) site of the bc-type complexes, has been shown to induce large conformational changes of the Rieske protein in the respiratory bc(1) complex (Kim, H., Xia, D., Yu, C. A., Xia, J. Z., Kachurin, A. M., Zhang, L., Yu, L., and Deisenhofer, J. (1998) Proc. Natl. Acad. Sci. U. S. A. 95, 8026-8033; Iwata, S., Lee, J. W., Okada, K., Lee, J. K., Iwata, M., Rasmussen, B., Link, T. A., Ramaswamy, S., and Jap, B. K. (1998) Science 281, 64-71; Zhang, Z., Huang, L., Shulmeister, V. M., Chi, Y. I., Kim, K. K., Hung, L. W., Crofts, A. R., Berry, E. A., and Kim, S. H. (1998) Nature 392, 677-684). Such a movement seems necessary to shuttle electrons from the membrane-soluble quinol to the extramembrane heme of cytochrome c(1). To see whether similar changes occur in the related photosynthetic b(6)f complex, we have studied the effect of the binding of stigmatellin to the eukaryotic b(6)f complex by electron crystallography. Comparison of projection maps of thin three-dimensional crystals prepared with or without stigmatellin, and either negatively stained or embedded in glucose, reveals a similar type of movement to that observed in the bc(1) complex and suggests also the occurrence of conformational changes in the transmembrane region.

Electron crystallographic methods for investigating gap junction structure

Gap junctions are clusters of closely packed intercellular membrane channels embedded in the plasma membranes of two adjoining cells. The central pore of the membrane channels serves as a conduit between cell cytoplasms for molecules less than 1000 Da in size. Advances in the purification of gap junctions and electron cryocrystallography and computer reconstruction techniques have produced new insights into the intercellular channel structure. Methods are described here for the purification of gap junction membranes, biochemical treatments to produce hemichannel layers ("split junctions"), assessment of the purity of gap junction preparations, electron cryomicroscopy, image processing and reconstruction, three-dimensional visualization, and interpretation. The critical step in electron crystallographic structure determination remains the isolation of crystalline material in sufficient and pure quantities for recording of electron microscope images. Along with sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western blotting, the quality of gap junction purification is assessed using electron microscopy of negatively stained preparations. Electron microscopy is also used to assess the crystallinity of the purified gap junctions and split junctions. Electron cryocrystallography is a powerful technique for high-resolution structural characterization. Image processing is used to combine and enhance two-dimensional images. Electron crystallographic analysis is used to generate a three-dimensional structure from a set of electron micrographs. This three-dimensional information is extracted from a set of images recorded after tilting the specimen in the electron microscope stage and recombined using Fourier analysis techniques analogous to those used in X-ray crystallography. Computer modeling of the three-dimensional gap junction structures is a useful tool for analyzing hemichannel docking.

Projection structure of a plant vacuole membrane aquaporin by electron cryo-crystallography

The water channel protein alpha-TIP is a member of the major intrinsic protein (MIP) membrane channel family. This aquaporin is found abundantly in vacuolar membranes of cotyledons (seed storage organs) and is synthesized during seed maturation. The water channel activity of alpha-TIP can be regulated by phosphorylation, and the protein may function in seed desiccation, cytoplasmic osmoregulation, and/or seed rehydration. Alpha-TIP was purified from seed meal of the common bean (Phaseolus vulgaris) by membrane fractionation, solubilization in diheptanoylphosphocholine and anion-exchange chromatography. Upon detergent removal and reconstitution into lipid bilayers, alpha-TIP crystallized as helical tubes. Electron cryo-crystallography of flattened tubes demonstrated that the crystals exhibit plane group p2 symmetry and c222 pseudosymmetry. Since the 2D crystals with p2 symmetry are derived from helical tubes, we infer that the unit of crystallization on the helical lattice is a dimer of tetramers. A projection density map at a resolution of 7.7 A revealed that alpha-TIP assembles as a 60 A x 60 A square tetramer. Each subunit is formed by a heart-shaped ring comprised of density peaks which we interpret as alpha-helices. The similarity of this structure to mammalian plasma membrane MIP-family proteins suggests that the molecular design of functionally analogous and genetically homologous aquaporins is maintained between the plant and animal kingdoms.

Expression, two-dimensional crystallization, and electron cryo-crystallography of recombinant gap junction membrane channels

We used electron cryo-microscopy and image analysis to examine frozen-hydrated, two-dimensional (2D) crystals of a recombinant, 30-kDa C-terminal truncation mutant of the cardiac gap junction channel formed by 43-kDa alpha(1) connexin. To our knowledge this is the first example of a structural analysis of a membrane protein that has been accomplished using microgram amounts of starting material. The recombinant alpha(1) connexin was expressed in a stably transfected line of baby hamster kidney cells and spontaneously assembled gap junction plaques. Detergent treatment with Tween 20 and 1,2-diheptanoyl-sn-phosphocholine resulted in well-ordered 2D crystals. A three-dimensional density (3D) map with an in-plane resolution of approximately 7.5 A revealed that each hexameric connexon was formed by 24 closely packed rods of density, consistent with an alpha-helical conformation for the four transmembrane domains of each connexin subunit. In the extracellular gap the aqueous channel was bounded by a continuous wall of protein that formed a tight electrical and chemical seal to exclude exchange of substances with the extracellular milieu.

Analysis of macromolecular structure and dynamics by electron cryo-microscopy

Electron cryo-microscopy has yielded a wealth of detailed new information on structures of biological macromolecules ranging from alphabeta-tubulin at 3.7 A resolution to hepatitis B virus at 7.4 A resolution, as well as a number of membrane proteins at 6-8 A resolution. Much of this progress was made possible by recent advances in instrumentation and image processing techniques.

Electron cryo-crystallography of a recombinant cardiac gap junction channel

Gap junctions in the heart play an important functional role by electrically coupling cells, thereby organizing the pattern of current flow to allow co-ordinated muscle contraction. Cardiac gap junctions are therefore intimately involved in normal conduction as well as the genesis of potentially lethal arrhythmias. We recently utilized electron cryo-microscopy and image analysis to examine frozen-hydrated 2D crystals of a recombinant, C-terminal truncated form of connexin 43 (Cx43; alpha 1), the principal cardiac gap junction protein. The projection map at 7 A resolution revealed that each 30 kDa connexin subunit has a transmembrane alpha-helix that lines the aqueous pore and a second alpha-helix in close contact with the membrane lipids. The distribution of densities allowed us to propose a model in which the two apposing connexons that form the channel are staggered by approximately 30 degrees. We are now recording images of tilted, frozen-hydrated 2D crystals, and a preliminary 3D map has been computed at an in-plane resolution of approximately 7.5 A and a vertical resolution of approximately 25 A. As predicted by our model, the two apposing connexons that form the channel are staggered with respect to each other for certain connexin molecular boundaries within the hexamer. Within the membrane interior each connexin subunit displays four rods of density, which are consistent with an alpha-helical conformation for the four transmembrane domains. Preliminary studies of BHK hamster cells that express the truncated Cx43 designated alpha 1 Cx263T demonstrate that oleamide, a sleep inducing lipid, blocks in vivo dye transfer, suggesting that oleamide causes closure of alpha 1 Cx263T channels. The comparison of the 3D structures in the presence and absence of oleamide may provide an opportunity to explore the conformational changes that are associated with oleamide-induced blockage of dye transfer. The structural details revealed by our analysis will be essential for delineating the molecular basis for intercellular current flow in the heart, as well as the general molecular design and functional properties of this important class of channel proteins.

Three-dimensional structure of a recombinant gap junction membrane channel

Gap junction membrane channels mediate electrical and metabolic coupling between adjacent cells. The structure of a recombinant cardiac gap junction channel was determined by electron crystallography at resolutions of 7.5 angstroms in the membrane plane and 21 angstroms in the vertical direction. The dodecameric channel was formed by the end-to-end docking of two hexamers, each of which displayed 24 rods of density in the membrane interior, which is consistent with an alpha-helical conformation for the four transmembrane domains of each connexin subunit. The transmembrane alpha-helical rods contrasted with the double-layered appearance of the extracellular domains. Although not indicative for a particular type of secondary structure, the protein density that formed the extracellular vestibule provided a tight seal to exclude the exchange of substances with the extracellular milieu.