Influence of magnesium ions on heat shock and ethanol stress responses of Saccharomyces cerevisiae

Water kefir in co-fermentation with Saccharomyces boulardii for the development of a new probiotic mead

Mead is an alcoholic beverage obtained by fermenting a dilute solution of honey with yeasts. The aim of this study was to develop and evaluate a probiotic mead from the co-fermentation of water kefir and Sacharomyces boulardii. According to the results, the combination of 10 g/L of water kefir grains and 0.75 g/L of S. boulardii, with a fermentation time of 9 days, produced a probiotic mead with a viable cell count of more than 8 Log10 CFU/mL of S. boulardii and also for lactic acid bacteria, respectively. S. boulardii and lactic acid bacteria showed counts of over 6 Log10 CFU/mL after gastrointestinal simulation in vitro, with a survival rate of over 70%. Probiotic mead has good luminosity (L*), a tendency to yellow color and the presence of total phenolic compounds and antioxidants. In conclusion, the co-fermentation of water kefir and S. boulardii has potential for the development of probiotic mead.

Effect of halo-tolerance gene Hal5 on ethanol tolerance of Saccharomyces cerevisiae

Hal5 gene is involved in halo-tolerance of Saccharomyces cerevisiae during high salt stress. Ethanol stress and high salt stress have similarities, as both decrease the availability of water for cells and strain the osmotic homeostasis across the cell membrane. The Hal5 over-expression strain of yeast has more ethanol tolerance, but the Hal5 null mutant strain also has more ethanol tolerance than the wild-type strain. Hal5 over-expression in this yeast strain may help in adaptation to ethanol stress by way of directly stabilizing the proteins (trk1-trk2) that are responsible for maintaining osmotic homeostasis. Dysfunction of Hal5 in the null mutant may result in increased trehalose, which also stabilizes proteins and increases ethanol tolerance in comparison to wild type, although not as much as over-expression of Hal5. In biochemical assays and FTIR, we observed an increase in trehalose in Hal5 mutant in comparison to the wild-type, as well as a further increase in response to ethanol stress. The ethanol stress increases ROS, protein carbonylation, and lipid peroxidation in all strains, but the Hal5 over-expression and Hal5 null mutation mitigate these adverse effects of ethanol stress.

Application of Non-Saccharomyces Yeast for the Production of Low-Alcohol Beer

In recent years, demand for low-alcohol and alcohol-free beers has been rising. Of the many methods of producing such beers, many have expensive implementation requirements or drawbacks in terms of beer quality. The exploration of non-Saccharomyces yeast species presents a promising opportunity to overcome these challenges. These yeasts, with their diverse metabolic capabilities and unique flavor profiles, offer the potential to create innovative and flavorful low-alcohol beers. The study investigates the feasibility of using selected non-Saccharomyces yeasts for brewing low-alcohol beers, focusing on fermentation kinetics, physicochemical parameters, and the sensory attributes of the final product. The evaluated yeast species were Kluyveromyces lactis MG971263, Metschnikowia pulcherrima MG971247 and MG971250, Torulaspora delbrueckii MG971248, Wickerhamomyces anomalus MG971261, and W. onychis MG971246. Two strains of Saccharomyces cerevisiae were used as a control. The results of the study show that selected non-Saccharomyces yeast species might be used to produce low-alcohol beers. The non-Saccharomyces yeast allowed the researchers to obtain beers with an alcohol content in the range of 0.5-1.05%, while the control beer brewed with US-05 had an alcohol content of 3.77%. Among the evaluated strains, the strains M. pulcherrima MG971250 and T. delbrueckii MG971248 were found to be rated better in a sensory evaluation than the brewed and low-alcohol strains of S. cerevisiae.

Search for protein kinase(s) related to cell growth or viability maintenance in the presence of ethanol in budding and fission yeasts

Alcohol fermentation comprises two phases: phase 1, alcohol fermentation occurs while yeast cells proliferate; phase 2, growth stops and alcohol fermentation continues. We categorized genes related to proliferation in low ethanol (phase 1) and viability in high ethanol (phase 2) as Alcohol Growth Ability (AGA) and Alcohol Viability (ALV), respectively. Although genes required for phase 1 are examined in budding yeast, those for phase 2 are unknown. We set conditions for ALV screening, searched for protein kinases (PKs) related to ALV in budding yeast, and expanded two screenings to fission yeast. Bub1 kinase was important for proliferation in low ethanol but not for viability in high ethanol, suggesting that the important PKs differ between the two phases. It was indeed the case. Further, 3 common PKs were identified as AGA in both yeasts, suggesting that the important cellular mechanism in phase 1 is conserved in both yeasts, at least partially.

Comprehensive network of stress-induced responses in Zymomonas mobilis during bioethanol production: from physiological and molecular responses to the effects of system metabolic engineering

Nowadays, biofuels, especially bioethanol, are becoming increasingly popular as an alternative to fossil fuels. Zymomonas mobilis is a desirable species for bioethanol production due to its unique characteristics, such as low biomass production and high-rate glucose metabolism. However, several factors can interfere with the fermentation process and hinder microbial activity, including lignocellulosic hydrolysate inhibitors, high temperatures, an osmotic environment, and high ethanol concentration. Overcoming these limitations is critical for effective bioethanol production. In this review, the stress response mechanisms of Z. mobilis are discussed in comparison to other ethanol-producing microbes. The mechanism of stress response is divided into physiological (changes in growth, metabolism, intracellular components, and cell membrane structures) and molecular (up and down-regulation of specific genes and elements of the regulatory system and their role in expression of specific proteins and control of metabolic fluxes) changes. Systemic metabolic engineering approaches, such as gene manipulation, overexpression, and silencing, are successful methods for building new metabolic pathways. Therefore, this review discusses systems metabolic engineering in conjunction with systems biology and synthetic biology as an important method for developing new strains with an effective response mechanism to fermentation stresses during bioethanol production. Overall, understanding the stress response mechanisms of Z. mobilis can lead to more efficient and effective bioethanol production.

Utilizing deep ocean water in yeast fermentation for enhanced mineral-rich biomass production and fermentative regulation by proteomics modulation

Deep Ocean Water (DOW) is rich in minerals and serves as a natural source of nutrients. However, due to the inorganic nature of these minerals, cultivating yeast in DOW could aid in the fermentation process, and simultaneously, the yeast can assimilate the minerals from DOW, resulting in a mineral-enriched yeast biomass. Focusing on three DOW sources off the eastern coast of Taiwan (TT-1, HL-1, HL-2), we fermented various yeast strains of Saccharomyces cerevisiae. Therefore, this study investigates the effects of DOW on yeast growth, alcohol dehydrogenase activity, and the biological absorption of mineral ions by the yeast. Additionally, this research employs two-dimensional electrophoresis techniques to examine how the absorbed minerals influence the regulation of yeast proteins, thereby affecting biomass and metabolism. In the result, S. cerevisiae BCRC 21689 demonstrated a remarkable ability to bio-absorb minerals such as magnesium, calcium, potassium, and zinc from DOW, enhancing its growth and fermentation performance. Proteomic analysis revealed significant shifts in the expression of 21 proteins related to glycolytic and energy metabolism, alcohol metabolism, and growth regulation, all influenced by DOW's mineral-rich environment. This indicates that DOW's mineral content is a key factor in upregulating essential enzymes in glycolytic metabolism and alcohol dehydrogenase. An increase in proteins involved in synthesis and folding processes was also observed, leading to a substantial increase in yeast biomass. This study underscores the potential of DOW as a natural enhancer in yeast fermentation processes, enriching the yeast with diverse minerals and modulating proteomic expression to optimize yeast growth and fermentation.

Optimization of High-Density Fermentation Conditions for Saccharomycopsis fibuligera Y1402 through Response Surface Analysis

Saccharomycopsis fibuligera, which produces enzymes like amylase and protease as well as flavor substances like β-phenyl ethanol and phenyl acetate, plays a crucial role in traditional fermented foods. However, this strain still lacks a high-density fermentation culture, which has had an impact on the strain's industrial application process. Therefore, this study investigated the optimization of medium ingredients and fermentation conditions for high-density fermentation of S. fibuligera Y1402 through single-factor design, Plackett-Burman design, steepest ascent test, and response surface analysis. The study found that glucose at 360.61 g/L, peptone at 50 g/L, yeast extract at 14.65 g/L, KH2PO4 at 5.49 g/L, MgSO4 at 0.40 g/L, and CuSO4 at 0.01 g/L were the best medium ingredients for S. fibuligera Y1402. Under these conditions, after three days of fermentation, the total colony count reached 1.79 × 108 CFU/mL. The optimal fermentation conditions were determined to be an initial pH of 6.0, an inoculum size of 1.10%, a liquid volume of 12.5 mL/250 mL, a rotation speed of 120 r/min, a fermentation temperature of 21 °C and a fermentation time of 53.50 h. When fermentation was conducted using the optimized medium and conditions, the total colony count achieved a remarkable value of 5.50 × 109 CFU/mL, exhibiting a substantial increase of nearly 31 times the original value in the optimal culture medium. This significant advancement offers valuable insights and a reference for the industrial-scale production of S. fibuligera.

Breeding of high-tolerance yeast by adaptive evolution and high-gravity brewing of mutant

BACKGROUND

Ethanol and osmotic stresses are the major limiting factors for brewing strong beer with high-gravity wort. Breeding of yeast strains with high osmotic and ethanol tolerance and studying very-high-gravity (VHG) brewing technology is of great significance for brewing strong beer.

RESULTS

This study used an optimized microbial microdroplet culture (MMC) system for adaptive laboratory evolution (ALE) of Saccharomyces cerevisiae YN81 to improve its tolerance to osmotic and ethanol stress. Meanwhile, we investigated the VHG and VHG with added ethanol (VHGAE) brewing processes for the evolved mutants in brewing strong beer. The results showed that three evolved mutants were obtained; among them, the growth performance of YN81mc-8.3 under 300, 340, 380, 420 and 460 g L-1 sucrose stresses was greater than that of the other strains. The ethanol tolerance of YN81mc-8.3 was 12%, which was 20% higher than that of YN81. During strong-beer brewing in a 100 L cylindrical cone-bottom tank, the sugar utilization and ethanol yield of YN81mc-8.3 outperformed those of YN81 in both the VHG and VHGAE brewing processes. Measurement of the diacetyl concentration showed that YN81mc-8.3 had a stronger diacetyl reduction ability; in particular, the real degree of fermentation of beers brewed by YN81mc-8.3 in VHG and VHGAE brewing processes was 75.35% and 66.71%, respectively - higher than those of the two samples brewed by YN81. Meanwhile, the visual, olfactive and gustative properties of the strong beer produced by YN81mc-8.3 were better than those of the other beers.

CONCLUSION

In this study, the mutant YN81mc-8.3 and the VHGAE brewing process were optimal and represented a better alternative strong-beer brewing process. © 2023 Society of Chemical Industry.

Magnesium Binding by Cyberlindnera jadinii Yeast in Media from Potato Wastewater and Glycerol

The aim of this study was to determine the magnesium-binding capacity of Cyberlindnera jadinii yeast in media prepared from potato wastewater and glycerol (after biodiesel production), supplemented with magnesium salt. The research was carried out in two stages. In the first, the ability to binding magnesium by yeast in media supplemented with various doses of this element was tested. In the second stage, after selecting the appropriate dose of magnesium, the culture was carried out in a bioreactor. The composition of the yeast biomass was also analysed in terms of lipids and protein content and amino acid composition. Studies have shown that this type of medium can be used as a culture medium for the growth of C. jadinii yeast. In the first stage of the study, the most magnesium (8.97 mg/gd.m.) was bound by yeast cells after 48 h of cultivation in a medium supplemented with the addition of magnesium at a dose of 2 g/L. In the second stage of the research, the highest magnesium content in the biomass (7.9 mg/gd.m.) was noted after 24 h of cultivation in the same medium. The lipid and protein contents in the biomass obtained after 24 h of cultivation in the bioreactor were 6.35 and 43.73%, respectively. The main fatty acids present in the yeast lipids were oleic acid (59.4%) and linoleic acid (8.6%). Analysis of the amino acid profile of the proteins showed the highest proportions were glutamic acid (13.7%) and aspartic acid (11%).

Fermentation Characteristics and Aromatic Profiles of Plum Wines Produced with Hanseniaspora thailandica Zal1 and Common Wine Yeasts

Plum has long been cultivated in northern Thailand and evolved into products having long shelf lives. In this study, plum processing was analyzed by comparing the production of plum wine using three types of yeast, Saccharomyces cerevisiae var. burgundy, Hanseniaspora thailandica Zal1, and S. cerevisiae Lalvin EC1118. EC1118 exhibited the highest alcohol content (9.31%), similar to that of burgundy (9.21%), and H. thailandica Zal1 had the lowest alcohol content (8.07%) after 14 days of fermentation. Plum wine fermented by S. cerevisiae var. burgundy had the highest total phenolic (TP) content and antioxidant activity of 469.84 ± 6.95 mg GAE/L and 304.36 ± 6.24 µg TE/g, respectively, similar to that fermented by EC1118 (418.27 ± 3.40 mg GAE/L 288.2 ± 7.9 µg TE/g). H. thailandica Zal1 exhibited the least amount of TP content and antioxidant activity; however, the volatility produced by H. thailandica Zal1 resulted in a plum wine with a distinct aroma.

Prospects of thermotolerant Kluyveromyces marxianus for high solids ethanol fermentation of lignocellulosic biomass

Simultaneous saccharification and fermentation (SSF) is effective for minimizing sugar inhibition during high solids fermentation of biomass solids to ethanol. However, fungal enzymes used during SSF are optimal between 50 and 60 °C, whereas most fermentative yeast, such as Saccharomyces cerevisiae, do not tolerate temperatures above 37 °C. Kluyveromyces marxianus variant CBS 6556 is a thermotolerant eukaryote that thrives at 43 °C, thus potentially serving as a promising new host for SSF operation in biorefineries. Here, we attempt to leverage the thermotolerance of the strain to demonstrate the application of CBS 6556 in a high solids (up to 20 wt% insoluble solid loading) SSF configuration to understand its capabilities and limitations as compared to a proven SSF strain, S. cerevisiae D5A. For this study, we first pretreated hardwood poplar chips using Co-Solvent Enhanced Lignocellulosic Fractionation (CELF) to remove lignin and hemicellulose and to produce cellulose-enriched pretreated solids for SSF. Our results demonstrate that although CBS 6556 could not directly outperform D5A, it demonstrated similar tolerance to high gravity sugar solutions, superior growth rates at higher temperatures and higher early stage ethanol productivity. We discovered that CBS 6556's membrane was particularly sensitive to higher ethanol concentrations causing it to suffer earlier fermentation arrest than D5A. Cross-examination of metabolite data between CBS 6556 and D5A and cell surface imaging suggests that the combined stresses of high ethanol concentrations and temperature to CBS 6556's cell membrane was a primary factor limiting its ethanol productivity. Hence, we believe K. marxianus to be an excellent host for future genetic engineering efforts to improve membrane robustness especially at high temperatures in order to achieve higher ethanol productivity and titers, serving as a viable alternative to D5A.

Screening and transcriptomic analysis of the ethanol-tolerant mutant Saccharomyces cerevisiae YN81 for high-gravity brewing

Ethanol stress is one of the major limiting factors for high-gravity brewing. Breeding of yeast strain with high ethanol tolerance, and revealing the ethanol tolerance mechanism of Saccharomyces cerevisiae is of great significance to the production of high-gravity beer. In this study, the mutant YN81 was obtained by ultraviolet-diethyl sulfate (UV-DES) cooperative mutagenesis from parental strain CS31 used in high-gravity craft beer brewing. The ethanol tolerance experiment results showed that cell growth and viability of YN81 were significantly greater than that of CS31 under ethanol stress. The ethanol tolerance mechanisms of YN81 were studied through observation of cell morphology, intracellular trehalose content, and transcriptomic analysis. Results from scanning electron microscope (SEM) showed alcohol toxicity caused significant changes in the cell morphology of CS31, while the cell morphology of YN81 changed slightly, indicating the cell morphology of CS31 got worse (the formation of hole and cell wrinkle). In addition, compared with ethanol-free stress, the trehalose content of YN81 and CS31 increased dramatically under ethanol stress, but there was no significant difference between YN81 and CS31, whether with or without ethanol stress. GO functional annotation analysis showed that under alcohol stress, the number of membrane-associated genes in YN81 was higher than that without alcohol stress, as well as CS31, while membrane-associated genes in YN81 were expressed more than CS31 under alcohol stress. KEGG functional enrichment analysis showed unsaturated fatty acid synthesis pathways and amino acid metabolic pathways were involved in ethanol tolerance of YN81. The mutant YN81 and its ethanol tolerance mechanism provide an optimal strain and theoretical basis for high-gravity craft beer brewing.

Bioflocculant produced by Bacillus velezensis and its potential application in brewery wastewater treatment

This study was designed to evaluate the potential of bioflocculant producing strains isolated from wastewater sludge. According to the Plackett–Burman design, the response surface revealed glucose, magnesium sulfate, and ammonium sulfate as critical media components of the nutritional source, whereas the central composite design affirmed an optimum concentration of the critical nutritional source as 16.0 g/l (glucose), 3.5 g/l magnesium sulfate heptahydrate (MgSO₄.7H₂O), and 1.6 g/l ammonium sulfate ( (NH₄)₂SO₄), yielding an optimal flocculation activity of 96.8%. Fourier Transformer Infrared Spectroscopy (FTIR) analysis confirmed the presence of hydroxyl, carboxyl and methoxyl in the structure of the bioflocculant. Additionally, chemical analysis affirmed the presence of mainly a polysaccharide in the main backbone of the purified bioflocculant with no detection of protein. Energy Dispersive X-ray analysis affirmed the presence of chlorine, phosphorous, oxygen and chlorine as representatives of elemental composition. Thermogravimetric (TGA) analysis revealed over 60% weight was retained at a temperature range of 700 °C. The purified bioflocculant remarkably removed chemical oxygen demand, biological oxygen demand and turbidity in brewery wastewater. This study suggested that the bioflocculant might be an alternate candidate for wastewater treatment.

Evaluation of the Biocontrol Potential of a Commercial Yeast Starter against Fuel-Ethanol Fermentation Contaminants

Lactic acid bacteria (LAB) and Brettanomyces bruxellensis are the main contaminants of bioethanol fermentations. Those contaminations affect Saccharomyces cerevisiae performance and reduce ethanol yields and productivity, leading to important economic losses. Currently, chemical treatments such as acid washing and/or antibiotics are used to control those contaminants. However, these control measures carry environmental risks, and more environmentally friendly methods are required. Several S. cerevisiae wine strains were found to secrete antimicrobial peptides (AMPs) during alcoholic fermentation that are active against LAB and B. bruxellensis strains. Thus, in the present study, we investigated if the fuel-ethanol commercial starter S. cerevisiae Ethanol Red (ER) also secretes those AMPs and evaluated its biocontrol potential by performing alcoholic fermentations with mixed-cultures of ER and B. bruxellensis strains and growth assays of LAB in ER pre-fermented supernatants. Results showed that all B. bruxellensis strains were significantly inhibited by the presence of ER, although LAB strains were less sensitive to ER fermentation metabolites. Peptides secreted by ER during alcoholic fermentation were purified by gel-filtration chromatography, and a bioactive fraction was analyzed by ELISA and mass spectrometry. Results confirmed that ER secretes the AMPs previously identified. That bioactive fraction was used to determine minimal inhibitory concentrations (MICs) against several LAB and B. bruxellensis strains. MICs of 1–2 mg/mL were found for B. bruxellensis strains and above 2 mg/mL for LAB. Our study demonstrates that the AMPs secreted by ER can be used as a natural preservative in fuel-ethanol fermentations.

Exogenous Indole-3-Acetic Acid Induced Ethanol Tolerance in Phylogenetically Diverse Saccharomycetales Yeasts

Indole-3-acetic acid (IAA) is an exogenous growth regulatory signal that is produced by plants and various microorganisms. Microorganisms have been suggested to cross-communicate with each other through IAA-mediated signaling mechanisms. The IAA-induced tolerance response has been reported in several microorganisms, but has not yet been described in Saccharomycetales yeasts. In the present study, three common stressors (heat, osmotic pressure, and ethanol) were examined in relation to the influence of a pretreatment with IAA on stress tolerance in 12 different lineages of Saccharomyces cerevisiae. The pretreatment with IAA had a significant effect on the induction of ethanol tolerance by reducing the doubling time of S. cerevisiae growth without the pretreatment. However, the pretreatment did not significantly affect the induction of thermo- or osmotolerance. The IAA pretreatment decreased the lethal effects of ethanol on S. cerevisiae cells. Although yeasts produce ethanol to outcompete sympatric microorganisms, IAA is not a byproduct of this process. Nevertheless, the accumulation of IAA indicates an increasing number of microorganisms, and, thus, greater competition for resources. Since the “wine trait” is shared by both phylogenetically related and distinct lineages in Saccharomycetales, we conclude that IAA-induced ethanol tolerance is not specific to S. cerevisiae; it may be widely detected in both pre-whole genome duplication (WGD) and post-WGD yeasts belonging to several genera of Saccharomycetales.

Production of Bioethanol—A Review of Factors Affecting Ethanol Yield

Fossil fuels are a major contributor to climate change, and as the demand for energy production increases, alternative sources (e.g., renewables) are becoming more attractive. Biofuels such as bioethanol reduce reliance on fossil fuels and can be compatible with the existing fleet of internal combustion engines. Incorporation of biofuels can reduce internal combustion engine (ICE) fleet carbon dioxide emissions. Bioethanol is typically produced via microbial fermentation of fermentable sugars, such as glucose, to ethanol. Traditional feedstocks (e.g., first-generation feedstock) include cereal grains, sugar cane, and sugar beets. However, due to concerns regarding food sustainability, lignocellulosic (second-generation) and algal biomass (third-generation) feedstocks have been investigated. Ethanol yield from fermentation is dependent on a multitude of factors. This review compares bioethanol production from a range of feedstocks, and elaborates on available technologies, including fermentation practices. The importance of maintaining nutrient homeostasis of yeast is also examined. The purpose of this review is to provide industrial producers and policy makers insight into available technologies, yields of bioethanol achieved by current manufacturing practices, and goals for future innovation.

Thermal adaptation of acetic acid bacteria for practical high-temperature vinegar fermentation

Thermotolerant microorganisms are useful for high-temperature fermentation. Several thermally adapted strains were previously obtained from Acetobacter pasteurianus in a nutrient-rich culture medium, while these adapted strains could not grow well at high temperature in the nutrient-poor practical culture medium, "rice moromi." In this study, A. pasteurianus K-1034 originally capable of performing acetic acid fermentation in rice moromi was thermally adapted by experimental evolution using a "pseudo" rice moromi culture. The adapted strains thus obtained were confirmed to grow well in such the nutrient-poor media in flask or jar-fermentor culture up to 40 or 39 °C; the mutation sites of the strains were also determined. The high-temperature fermentation ability was also shown to be comparable with a low-nutrient adapted strain previously obtained. Using the practical fermentation system, "Acetofermenter," acetic acid production was compared in the moromi culture; the results showed that the adapted strains efficiently perform practical vinegar production under high-temperature conditions.

Effect of magnesium ions on glucaric acid production in the engineered Saccharomyces cerevisiae

Glucaric acid has been successfully produced in Escherichia coli and fungus. Here, we first analyzed the effects of different metal ions on glucaric acid production in the engineered Saccharomyces cerevisiae Bga-3 strain harboring the glucaric acid synthesis pathway. We found that magnesium ions could promote the growth rate of yeast cells, and thus, increase the glucaric acid production by elevating the glucose and myo-inositol utilization of Bga-3 strain. RNA-Seq transcriptome analysis results showed that the upregulation of genes involved in the gluconeogenesis pathway, as well as the downregulation of genes associated with the glycolysis pathway and pentose phosphate pathway in response to MgCl₂ were all benefit for the enhancement of the glucose-6-phosphate flux, which was the precursor for myo-inositol and glucaric acid. In addition, we found that MgCl₂ could also increase the activity of MIOX4, which was also crucial for glucaric acid synthesis. At last, a final glucaric acid titer of 10.6 g/L, the highest reported titer, was achieved in the fed-batch fermentation using a 5-L bioreactor by adding 100 mM MgCl₂. Our findings will provide a new way of promoting the production of other chemicals in the engineered yeast cells.

Reducing glucoamylase usage for commercial-scale ethanol production from starch using glucoamylase expressing Saccharomyces cerevisiae

The development of yeast that converts raw corn or cassava starch to ethanol without adding the exogenous α-amylase and/or glucoamylase would reduce the overall ethanol production cost. In this study, two copies of codon-optimized Saccharomycopsis fibuligera glucoamylase genes were integrated into the genome of the industrial Saccharomyces cerevisiae strain CCTCC M94055, and the resulting strain CIBTS1522 showed comparable basic growth characters with the parental strain. We systemically evaluated the fermentation performance of the CIBTS1522 strain using the raw corn or cassava starch at small and commercial-scale, and observed that a reduction of at least 40% of the dose of glucoamylase was possible when using the CIBTS1522 yeast under real ethanol production condition. Next, we measured the effect of the nitrogen source, the phosphorous source, metal ions, and industrial microbial enzymes on the strain's cell wet weight and ethanol content, the nitrogen source and acid protease showed a positive effect on these parameters. Finally, orthogonal tests for some other factors including urea, acid protease, inoculum size, and glucoamylase addition were conducted to further optimize the ethanol production. Taken together, the CIBTS1522 strain was identified as an ideal candidate for the bioethanol industry and a better fermentation performance could be achieved by modifying the industrial culture media and condition.

The Use of Non-Saccharomyces Yeast and Enzymes in Beer Production

The objective of this paper was to test the potential of selected non-Saccharomyces strains for beer production, by using Saccharomyces cerevisiae as a control sample. For some of variants brewing enzymes were added to wort to increase the content of fermentable sugars. The non-Saccharomyces yeasts differed in the fermentation process rate. The basic beer physiochemical parameters were assessed, including: alcohol content, extract, free amino nitrogen, sugars, acidity, colour, and the profile of volatile compounds and metal ions. The use of enzymes caused an increase in alcohol and fusel alcohols concentration in beers obtained. Total acidity, free amine nitrogen content, colour and sugar content indicated that the tested non-Saccharomyces yeast allowed obtaining beers with the proper analytical parameters.

Yeast Cellular Stress: Impacts on Bioethanol Production

Bioethanol is the largest biotechnology product and the most dominant biofuel globally. Saccharomyces cerevisiae is the most favored microorganism employed for its industrial production. However, obtaining maximum yields from an ethanol fermentation remains a technical challenge, since cellular stresses detrimentally impact on the efficiency of yeast cell growth and metabolism. Ethanol fermentation stresses potentially include osmotic, chaotropic, oxidative, and heat stress, as well as shifts in pH. Well-developed stress responses and tolerance mechanisms make S. cerevisiae industrious, with bioprocessing techniques also being deployed at industrial scale for the optimization of fermentation parameters and the effective management of inhibition issues. Overlap exists between yeast responses to different forms of stress. This review outlines yeast fermentation stresses and known mechanisms conferring stress tolerance, with their further elucidation and improvement possessing the potential to improve fermentation efficiency.

The Quality of Ciders Depends on the Must Supplementation with Mineral Salts

Providing yeast with the right amount of mineral salts before fermentation can contribute to improving the entire technological process, resulting in a better-quality final product. The aim of this study was to assess the impact of apple must supplementation with mineral salts ((NH4)2SO4, MgSO4, (NH4)3PO4)) on enological parameters, antioxidant activity, total polyphenol content, and the profile of volatile cider compounds fermented with various yeast strains. Rubin cultivar must was inoculated with wine, cider, and distillery or wild yeast strains. Various mineral salts and their mixtures were introduced into the must in doses from 0.167 g/L to 0.5 g/L. The control sample consisted of ciders with no added mineral salts. The basic enological parameters, antioxidant properties, total polyphenol content, and their profile, as well as the composition of volatile compounds, were assessed in ciders. Must supplementation with magnesium salts significantly influenced the use of the analyzed element by yeast cells and was dependent on the yeast strain. In supplemented samples, a decrease in alcohol concentration and total acidity, as well as an increase in the content of extract and total polyphenols, was observed compared to the controls. The addition of ammonium salts caused a decrease in the amount of higher alcohols and magnesium salts, as well as a decrease in the concentration of some esters in ciders.

The Third International Symposium on Fungal Stress - ISFUS

Stress is a normal part of life for fungi, which can survive in environments considered inhospitable or hostile for other organisms. Due to the ability of fungi to respond to, survive in, and transform the environment, even under severe stresses, many researchers are exploring the mechanisms that enable fungi to adapt to stress. The International Symposium on Fungal Stress (ISFUS) brings together leading scientists from around the world who research fungal stress. This article discusses presentations given at the third ISFUS, held in São José dos Campos, São Paulo, Brazil in 2019, thereby summarizing the state-of-the-art knowledge on fungal stress, a field that includes microbiology, agriculture, ecology, biotechnology, medicine, and astrobiology.

Recombinant production of a hard-to-express membrane-bound cytochrome P450 in different yeasts-Comparison of physiology and productivity

Cytochrome P450s comprise one of the largest protein superfamilies. They occur in every kingdom of life and catalyse a variety of essential reactions. Their production is of utmost interest regarding biotransformation and structure‐function elucidation. However, they have proven hard to express due to their membrane anchor, their complex co‐factor requirements and their need for a redox‐partner. In our study, we investigated and compared different yeast strains for the production of the plant cytochrome P450 chalcone 3‐hydroxylase. To our knowledge, this is the first study evaluating different yeasts for the expression of this abundant and highly significant protein superfamily.

Saccharomyces cerevisiae and three different strains of Pichia pastoris expressing chalcone 3‐hydroxylase were cultivated in controlled bioreactor runs and evaluated regarding physiological parameters and expression levels of the cytochrome P450. Production differed significantly between the different strains and was found highest in the investigated P. pastoris MutS strain KM71H where 8 mg P450 per gram dry cell weight were detected. We believe that this host could be suitable for the expression of many eukaryotic, especially plant‐derived, cytochrome P450s as it combines high specific product yields together with straightforward cultivation techniques for achieving high biomass concentrations. Both factors greatly facilitate subsequent establishment of purification procedures for the cytochrome P450 and make the yeast strain an ideal platform for biotransformation as well.

Mitigating stress in industrial yeasts

The yeast, Saccharomyces cerevisiae, is the premier fungal cell factory exploited in industrial biotechnology. In particular, ethanol production by yeast fermentation represents the world's foremost biotechnological process, with beverage and fuel ethanol contributing significantly to many countries economic and energy sustainability. During industrial fermentation processes, yeast cells are subjected to several physical, chemical and biological stress factors that can detrimentally affect ethanol yields and overall production efficiency. These stresses include ethanol toxicity, osmostress, nutrient starvation, pH and temperature shock, as well as biotic stress due to contaminating microorganisms. Several cell physiological and genetic approaches to mitigate yeast stress during industrial fermentations can be undertaken, and such approaches will be discussed with reference to stress mitigation in yeasts employed in Brazilian bioethanol processes. This article will highlight the importance of furthering our understanding of key aspects of yeast stress physiology and the beneficial impact this can have more generally on enhancing industrial fungal bioprocesses.

Growth Parameters and Survivability of Saccharomyces boulardii for Probiotic Alcoholic Beverages Development

The aim of this research was to optimize the growth parameters (pH, ethanol tolerance, initial cell concentration and temperature) for Saccharomyces boulardii and its tolerance to in vitro gastrointestinal conditions for probiotic alcoholic beverage development. Placket-Burman screening was used to select only statistically significant variables, and the polynomial mathematical model for yeast growth was obtained by central composite rotatable design. Confirmation experiments to determine the kinetic parameters for yeast growth were carried out by controlling the temperature and pH. Soon after, the survivability of yeast was tested under in vitro conditions mimicking the human upper gastrointestinal transit. S. boulardii had suitable resistance to alcohol and gastrointestinal conditions for probiotic alcoholic beverage development.

Metabolic fluxes-oriented control of bioreactors: a novel approach to tune micro-aeration and substrate feeding in fermentations

Background

Fine-tuning the aeration for cultivations when oxygen-limited conditions are demanded (such as the production of vaccines, isobutanol, 2–3 butanediol, acetone, and bioethanol) is still a challenge in the area of bioreactor automation and advanced control. In this work, an innovative control strategy based on metabolic fluxes was implemented and evaluated in a case study: micro-aerated ethanol fermentation.

Results

The experiments were carried out in fed-batch mode, using commercial Saccharomyces cerevisiae, defined medium, and glucose as carbon source. Simulations of a genome-scale metabolic model for Saccharomyces cerevisiae were used to identify the range of oxygen and substrate fluxes that would maximize ethanol fluxes. Oxygen supply and feed flow rate were manipulated to control oxygen and substrate fluxes, as well as the respiratory quotient (RQ). The performance of the controlled cultivation was compared to two other fermentation strategies: a conventional “Brazilian fuel-ethanol plant” fermentation and a strictly anaerobic fermentation (with ultra-pure nitrogen used as the inlet gas). The cultivation carried out under the proposed control strategy showed the best average volumetric ethanol productivity (7.0 g L⁻¹ h⁻¹), with a final ethanol concentration of 87 g L⁻¹ and yield of 0.46 g_ethanol g_substrate⁻¹. The other fermentation strategies showed lower yields (close to 0.40 g_ethanol g_substrate⁻¹) and ethanol productivity around 4.0 g L⁻¹ h⁻¹.

Conclusion

The control system based on fluxes was successfully implemented. The proposed approach could also be adapted to control several bioprocesses that require restrict aeration.

Interaction of 4-ethylphenol, pH, sucrose and ethanol on the growth and fermentation capacity of the industrial strain of Saccharomyces cerevisiae PE-2

Volatile phenols such as 4-ethylphenol are produced from hydroxycinnamic acids by Dekkera bruxellensis, an important yeast contaminating alcoholic fermentations. 4-ethylphenol results from the decarboxylation and reduction of p-coumaric acid, a compound found in sugarcane musts. In wine, volatile phenols are responsible by sensorial alterations whereas in the context of bioethanol fermentation, little is known about their effects on the main yeast, Saccharomyces cerevisiae. Here we evaluated the interaction of 4-ethylphenol and pH, sucrose and ethanol on the growth and fermentation capacity of the industrial strain of S. cerevisiae PE-2. A central compound rotational design was utilized to evaluate the effect of 4-ethylphenol, pH, ethanol and sucrose concentration on the yeast maximum specific growth rate (µ_max) in microplate experiments in YPS medium (Yeast extract-Peptone-Sucrose), at 30 °C. Following, single-cycle fermentations in YPS medium, pH 4.5, 17% sucrose, at 30 °C, with 4-ethylphenol in concentrations of 10 and 20 mg L^-1 being added at the start or after 4 h of fermentation, were carried out. 4-ethylphenol affected µ_max of S. cerevisiae in situations that resemble the conditions of industrial bioethanol production, especially the low pH of the fermentation medium and the high ethanol concentration because of the anaerobic sucrose uptake. The addition of 4-ethylphenol on fermentation resulted in significant effect on the cell yeast concentration, pH and alcohol production, with significant decrease from 86% to the range of 65-74% in the fermentative efficiency. The industrial yeast S. cerevisiae PE-2 growth and fermentative capacity were affected by the presence of 4-ethylphenol, a metabolite produced by D. bruxellensis, which may contribute to explain the impact of this yeast on bioethanol industrial production.

Analyzing Thermal Stability of Cell Membrane of Salmonella Using Time-Multiplexed Impedance Sensing

Heat treatment is one of the most widely used methods for inactivation of bacteria in food products. Heat-induced loss of bacterial viability has been variously attributed to protein denaturation, oxidative stress, or membrane leakage; indeed, it is likely to involve a combination of these processes. We examine the effect of mild heat stress (50-55°C for ≤12 min) on cell permeability by directly measuring the electrical conductance of samples of Salmonella enterica serovar Typhimurium to answer a fundamental biophysical question, namely, how bacteria die under mild heat stress. Our results show that when exposed to heat shock, the cell membrane is damaged and cells die mainly due to the leakage of small cytoplasmic species to the surrounding media without lysis (confirmed by fluorescent imaging). We measured the conductance change, ΔY, of wild-type versus genetically modified heat-resistant (HR) cells in response to pulse and ramp heating profiles with different thermal time constants. In addition, we developed a phenomenological model to correlate the membrane damage, cytoplasmic leakage, and cell viability. This model traces the differential viability and ΔY of wild-type and HR cells to the difference in the effective activation energies needed to permeabilize the cells, implying that HR cells are characterized by stronger lateral interactions between molecules, such as lipids, in their cell envelope.

Effect of diluted hydrolysate as yeast propagation medium on ethanol production

Yeast propagation using 50% diluted hydrolysate in water was utilized for the fermentation of hydrolysate derived from pre-treated ensiled sweet sorghum. The purpose was to condition the yeast to the inhibitors generated during the ensiling of sweet sorghum. The conditioned seed cultures exhibited similar fermentation performance and superior kinetics than the inoculum prepared in YPD medium. Furthermore, the conditioned yeast showed increased tolerance to the increased levels of these inhibitors, including ethanol, acetic and lactic acids, demonstrating an effective way to increase the robustness of yeast fermentation for ethanol production.

Mechanisms of Yeast Adaptation to Wine Fermentations

Cells face genetic and/or environmental changes in order to outlast and proliferate. Characterization of changes after stress at different "omics" levels is crucial to understand the adaptation of yeast to changing conditions. Wine fermentation is a stressful situation which yeast cells have to cope with. Genome-wide analyses extend our cellular physiology knowledge by pointing out the mechanisms that contribute to sense the stress caused by these perturbations (temperature, ethanol, sulfites, nitrogen, etc.) and related signaling pathways. The model organism, Saccharomyces cerevisiae, was studied in response to industrial stresses and changes at different cellular levels (transcriptomic, proteomic, and metabolomics), which were followed statically and/or dynamically in the short and long terms. This chapter focuses on the response of yeast cells to the diverse stress situations that occur during wine fermentations, which induce perturbations, including nutritional changes, ethanol stress, temperature stress, oxidative stress, etc.

Effect of the clarification pH of sorghum juice on the composition of essential nutrients for fermentation

The growing demand to replace fossil fuels with renewable alternatives has generated an urgent and imminent global need to find new non-fossil sources. Sweet sorghum is widely recognized as a highly promising biomass energy crop with the particular potential to complement sugarcane for ethanol production. Our aim in this study was to evaluate the influence of pH during the clarification process on the composition of essential nutrients in the sorghum juice and observe how this affects the efficiency of the ethanol fermentation process. We found that a higher pH directly affected residual concentrations of key nutrients (P, Ca, Zn and Mn) and consequently the efficiency of ethanol fermentation. In conclusion, we recommend a clarification procedure at pH 6-6.5 in order not to significantly affect nutritional parameters important for the yeast fermentation process.

Enhancing Yeast Alcoholic Fermentations

The production of ethanol by yeast fermentation represents the largest of all global biotechnologies. Consequently, the yeast Saccharomyces cerevisiae is the world's premier industrial microorganism, which is responsible not only for the production of alcoholic beverages, including beer, wine, and distilled spirits, but also for the billions of liters of bioethanol produced annually for use as a renewable transportation fuel. Although humankind has exploited the fermentative activities of yeasts for millennia, many aspects of alcohol fermentation remain poorly understood. This chapter will review some of the key considerations in optimizing industrial alcohol fermentations with a particular emphasis on enhancement opportunities involving cell physiology and strain engineering of the major microbial ethanologen, the yeast S. cerevisiae.

Improved fermentation efficiency of S. cerevisiae by changing glycolytic metabolic pathways with plasma agitation

Production of ethanol by the yeast Saccharomyces cerevisiae is a process of global importance. In these processes, productivities and yields are pushed to their maximum possible values leading to cellular stress. Transient and lasting enhancements in tolerance and performance have been obtained by genetic engineering, forced evolution, and exposure to moderate levels of chemical and/or physical stimuli, yet the drawbacks of these methods include cost, and multi-step, complex and lengthy treatment protocols. Here, plasma agitation is shown to rapidly induce desirable phenotypic changes in S. cerevisiae after a single treatment, resulting in improved conversion of glucose to ethanol. With a complex environment rich in energetic electrons, highly-reactive chemical species, photons, and gas flow effects, plasma treatment simultaneously mimics exposure to multiple environmental stressors. A single treatment of up to 10 minutes performed using an atmospheric pressure plasma jet was sufficient to induce changes in cell membrane structure, and increased hexokinase 2 activity and secondary metabolite production. These results suggest that plasma treatment is a promising strategy that can contribute to improving metabolic activity in industrial microbial strains, and thus the practicality and economics of industrial fermentations.