Factors affecting the fermentative lactic acid production from renewable resources(1)

Bacillus licheniformis and Wickerhamiella versatilis: Sources of the pleasant smoky and fruity flavors of soybean paste

4-Vinylguaiacol (4-VG) and 4-Ethylguaiacol (4-EG) are key aromatic compounds that contribute to the characteristic smoky and soy-like aromas of soybean paste, thereby influencing its overall flavor. 4-EG in soybean paste reached 13.76 mg/kg through the inoculation of two bacterial strains: Bacillus licheniformis, which promotes the production of 4-VG, and Wickerhamiella versatilis, which enhances the generation of 4-EG. The results indicated that the 4-VG produced by Bacillus licheniformis during fermentation can be converted into 4-EG by Wickerhamiella versatilis. Furthermore, Wickerhamiella versatilis promoted the development of ethyl ester flavors, which added sweet and fruity compounds to the soybean paste. Notably, the levels of alcohols and esters increased by 59 and 22 times, respectively, while the organic acid concentration increased by 1.5 times. This study underscored that both B. licheniformis and W. versatilis significantly enhance appealing smoky and fruity flavors through the production of 4-EG and aromatic compounds.

Effects of Organic Acid Vapors on Salmonella Inactivation and Quality Characteristics of Blueberries

The aim of this study was to control Salmonella Newport contamination in blueberries using organic acid vapors while monitoring changes in the quality of the blueberries. Blueberries inoculated with S. Newport were subjected to organic acid vapors for 4 h at either 12 °C or 25 °C (with 85% relative humidity). Within just 1 h, the population of S. Newport on blueberries exposed to formic acid vapor at 12 °C dropped below the detection limit (1.70 log cfu/sample). Irrespective of the type of organic acid used, the S. Newport population on blueberries decreased to below the detection limit within 30 min at 25 °C. Furthermore, S. Newport was not detected when blueberries were treated with formic acid vapor for 2 h at 12 °C and for 30 min at 25 °C. Upon storage of blueberries at 25 °C, mold growth appeared on their surface after 2 days. However, blueberries treated with acetic acid, formic acid, or propionic acid vapor showed no signs of mold growth for up to 7 days of storage. The hardness of blueberries decreased after 2 h of treatment with propionic acid or formic acid vapor at 25 °C. Blueberries were treated with organic acid vapors for 30 min at 25 °C and then stored at 4 ± 2 °C for 24 h. Sensory evaluation afterward showed no differences in color, odor, or texture compared to untreated blueberries. In summary, S. Newport contamination of blueberries was effectively controlled by organic acid vapors at 25 °C for 30 min, with no critical changes observed in the quality of the blueberries.

From microbial proteins to cultivated meat for alternative meat-like products: a review on sustainable fermentation approaches

The global demand for protein is rapidly increasing due to population growth and changing dietary preferences, highlighting the need for sustainable alternatives to traditional animal-based proteins. This review explores cultivated meat and microbial alternative proteins, focusing on their potential to meet nutritional needs while mitigating environmental impacts. It also examines the production of cultivated meat as well as various sources of microbial proteins, including mycoproteins, bacterial proteins, and microalgae, highlighting their nutritional profiles, production methods, and commercial applications. This includes an evaluation of the state of commercialization of mycoproteins and the innovative use of agricultural and industrial by-products as substrates for microbial fermentation. The integration of microbial protein production with the bioenergy sector is evaluated as a relevant alternative to attain a synergetic effect between energy and food production systems. Ultimately, this work aims to underscore the importance of microbial proteins in advancing towards a more sustainable protein production system, offering insights into current challenges and future opportunities in the field of fermentation to produce alternative proteins.

Lactic Acid Bacteria and Yeast Fermentation to Improve the Nutritional Value of Ulva rigida

Aquaculture reliance on fishmeal protein has become a bottleneck due to long-term sustainability concerns and increasing costs. Given its abundance and nutrient-rich profile, the green macroalga Ulva rigida is a promising alternative protein source. However, the bioaccessibility of its proteins is hindered by an embedding matrix of ulvan, a gel-forming polysaccharide. Saccharification of the alga crude fiber followed by microbial fermentation improves protein bioaccessibility and leads to products of higher protein content and quality. Also, upon fermentation, the nutritional and bioactive properties of these feed ingredients are enhanced, since microorganisms synthesize vitamins, new proteins, and essential amino acids. The carbohydrate fraction of Ulva rigida was hydrolyzed into a sugar-rich syrup and subsequently used as a substrate in microbial fermentations. Three types of fermentation were tested, namely, with a consortium of four lactic acid bacteria (LAB), with Saccharomyces cerevisiae, and with a co-culture of lactobacilli and yeast. A functional analysis of lyophilized whole-fermentation broths revealed that the yeast-fermented products had stronger antioxidant properties when compared to the LAB-fermented products. The protein bioaccessibility in the fermented products was 11- to 12-fold higher than that of the raw alga. These findings highlight the potential of utilizing S. cerevisiae and lactobacilli starter cultures in seaweed fermentation to produce Ulva-based feed ingredients.

Skim Milk Culture of Lactobacillus johnsonii SBT0309 Increases Intestinal Alkaline Phosphatase Activity and Inhibits Lipopolysaccharide-Induced Interleukin-8 Production in Intestinal Epithelial Cells

BACKGROUND/OBJECTIVES

Intestinal alkaline phosphatase (IAP) is an enzyme expressed in the intestinal brush border, which may exert anti-inflammatory effects by detoxifying lipopolysaccharides (LPSs), thereby preventing metabolic disorders. Various food components have been reported to influence IAP activity. However, few studies have evaluated the effects of fermented milk on IAP activity. In this study, we aimed to investigate fermented milk with high IAP-activating capacity and investigate its effect.

METHODS

We screened a skim milk culture (SC), a fermented milk model, using differentiated Caco-2 cells. We investigated the effect of SC on IAP activity and gene expression in the Drosophila midgut. Quantitative PCR and immunoblot assays were conducted to examine gene and protein levels.

RESULTS

Among the SC samples from different lactic acid bacteria or bifidobacteria, the SC of Lactobacillus johnsonii SBT0309 (LJ0309 SC) demonstrated a particularly strong capacity to activate IAP in Caco-2 cells, demonstrated by significantly increased IAP gene expression and protein levels in Caco-2 cells. Additionally, LJ0309 SC inhibited increased secretion of IL-8 in LPS-stimulated Caco-2 cells. Finally, in Drosophila melanogaster fed LJ0309 SC, we observed an increase in both IAP activity and gene expression in the midgut.

CONCLUSIONS

LJ0309 SC increased IAP activity and gene expression in both Caco-2 cells and the Drosophila midgut, and inhibited the inflammatory response in LPS-stimulated Caco-2 cells. Although further in vivo studies are required, LJ0309 SC might help to ameliorate LPS-induced inflammation and disease via IAP activation.

Advances in L-Lactic Acid Production from Lignocellulose Using Genetically Modified Microbial Systems

Lactic acid is a vital organic acid with a wide range of industrial applications, particularly in the food, pharmaceutical, cosmetic, and biomedical sectors. The conventional production of lactic acid from refined sugars poses high costs and significant environmental impacts, leading to the exploration of alternative raw materials and more sustainable processes. Lignocellulosic biomass, particularly agro-industrial residues such as agave bagasse, represents a promising substrate for lactic acid production. Agave bagasse, a by-product of the tequila and mezcal industries, is rich in fermentable carbohydrates, making it an ideal raw material for biotechnological processes. The use of lactic acid bacteria (LAB), particularly genetically modified microorganisms (GMMs), has been shown to enhance fermentation efficiency and lactic acid yield. This review explores the potential of lignocellulosic biomass as a substrate for microbial fermentation to produce lactic acid and other high-value products. It covers the composition and pretreatment of some agricultural residues, the selection of suitable microorganisms, and the optimization of fermentation conditions. The paper highlights the promising future of agro-industrial residue valorization through biotechnological processes and the sustainable production of lactic acid as an alternative to conventional methods.

A review of exploring the synthesis, properties, and diverse applications of poly lactic acid with a focus on food packaging application

Polylactic acid (PLA) is an aliphatic polyester, which is primarily synthesized from renewable resources through the polycondensation or ring-opening polymerization of lactic acid (LA)/lactide. LA can be conveniently produced via the fermentation of sugars obtained from renewable sources such as corn and sugar cane. Due to its biodegradable and biocompatible nature, PLA exhibits a vast range of applications. Its advantages include non-toxicity, environmental safety, and compatibility with human biological systems. PLA finds significant use in various biomedical applications, including implants, tissue engineering, sutures, and drug delivery systems. Additionally, PLA serves as a renewable and biodegradable polymer of extensive utility in film production, offering an alternative to petrochemical-based polymers. Moreover, the properties of PLA-based films can be tailored by incorporating extracts, polysaccharides, proteins, and nano-particles. This review encompasses LA production, PLA synthesis, and diverse applications of PLA and further explores the potential of PLA in the realm of packaging.

Escherichia coli-based biorefining process yields optically pure lactic acid from fermented second-generation feedstocks

Within the circular bioeconomy the production of optically pure LA from 2nd generation feedstocks would be ideal but it is very challenging. In this paper genetically engineered Escherichia coli strains were created to resolve racemic LA solutions synthesised and produced from the fermentation of organic waste or ensiled grass. Refining LA racemic mixtures into either a D- or L-LA was achieved by cells being able to consume one LA isomer as a sole carbon and energy source while not being able to consume the other. A D-LA refining strain JSP0005 was grown on fermented source-sorted organic household waste and different grass silage leachates, which are 2nd generation feedstocks containing up to 33 g/L lactic acid racemate. In all growth experiments, L-LA was completely removed leaving D-LA as the only LA stereoisomer, i.e. resulting in optically pure D-LA, which also increased by as much as 248.6 % from its starting concentration, corresponding to 38 g/L. The strains resulting from this study are a promising first step towards a microbial based LA biorefining process.

Innovative Lactic Acid Production Techniques Driving Advances in Silage Fermentation

Lactic acid (LA) plays a crucial role in the silage process, which occurs through LA fermentation. Consequently, there is a strong correlation between lactic acid production and the efficiency of the silage. However, traditional methods face challenges like long fermentation times, low acid production, and unstable quality, limiting agricultural preservation. This paper aims to explore innovations in lactic acid production technologies and show how these technologies have driven the development of silage fermentation for agricultural conservation. First, the important role of LA in agricultural preservation and the limitations of traditional silage techniques are presented. Next, advancements in LA production methods are thoroughly examined, covering the selection of microbial strains and the substitution of fermentation substrates. Following this, new technologies for silage fermentation are explored, drawing from innovations in LA production. These include the selection of LA strains, optimization of fermentation conditions, and improvements in fermentation techniques. These innovations have proven effective in increasing LA production, improving feed quality, extending shelf life, and providing new solutions to enhance agricultural production and sustainability.

Chemical components and their impact on the organoleptic properties of herb-supplemented soy paste (doenjang)

Traditional Korean fermented soy paste (doenjang) has various health benefits; however, its intense umami flavor might interfere with global acceptance. Herbs-supplemented (HS) doenjang, coriander (CS), Korean mint (KMS), and peppermint (PMS), during fermentation was evaluated for its organoleptic properties. The levels of most free amino acids in HS doenjang, known to impart intense flavor, were decreased, including aspartic acid and glutamine. γ-Aminobutyric acid levels increased, whereas 2-pentylfuran levels significantly decreased in KMS and PMS doenjang (p < 0.05). The decrease in the levels of total free sugars, especially glucose, acetic acid, and fumaric acid, and the increase in lactic acid levels reflected in the desirable sour taste. Sensory evaluation corresponded to these alterations, judged superior most of sensorial attributes both by the Korean and foreigner panel particularly in KMS doenjang. Changed amount of chemical components, e.g. asparagine and glutamine of HS doenjang decreased strong umami flavor, it further affected sensory properties.

Association between organic nitrogen substrates and the optical purity of D-lactic acid during the fermentation by Sporolactobacillus terrae SBT-1

The development of biotechnological lactic acid production has attracted attention to the potential production of an optically pure isomer of lactic acid, although the relationship between fermentation and the biosynthesis of highly optically pure D-lactic acid remains poorly understood. Sporolactobacillus terrae SBT-1 is an excellent D-lactic acid producer that depends on cultivation conditions. Herein, three enzymes responsible for synthesizing optically pure D-lactic acid, including D-lactate dehydrogenase (D-LDH; encoded by ldhDs), L-lactate dehydrogenase (L-LDH; encoded by ldhLs), and lactate racemase (Lar; encoded by larA), were quantified under different organic nitrogen sources and concentration to study the relationship between fermentation conditions and synthesis pathway of optically pure lactic acid. Different organic nitrogen sources and concentrations significantly affected the quantity and quality of D-lactic acid produced by strain SBT-1 as well as the synthetic optically pure lactic acid pathway. Yeast extract is a preferred organic nitrogen source for achieving high catalytic efficiency of D-lactate dehydrogenase and increasing the transcription level of ldhA2, indicating that this enzyme plays a major role in D-lactic acid formation in S. terrae SBT-1. Furthermore, lactate racemization activity could be regulated by the presence of D-lactic acid. The results of this study suggest that specific nutrient requirements are necessary to achieve a stable and highly productive fermentation process for the D-lactic acid of an individual strain.

Green ecofriendly enhancement of cellulase productivity using agricultural wastes by Aspergillus terreus MN901491: statistical designs and detergent ability on cotton fabrics

BACKGROUND

Cellulase is considered a group member of the hydrolytic enzymes, responsible for catalyzing the hydrolysis of cellulose and has various industrial applications. Agricultural wastes are used as an inexpensive source for several utilizable products throughout the world. So, searching for cellulase enzymes from fungal strains capable of utilizing agricultural wastes to increase productivity, reduce costs and overcome waste accumulation in the environment is very important to evaluate its potency as a bio-additive to detergent agents.

RESULTS

In the current study, the previously identified fungal strain Aspergillus terreus MN901491 was screened and selected for cellulase production. Medium parameters were optimized using one-factor-at-a-time (OFAT) and multi-factorial (Plackett-Burman and Box-Behnken) design methods. OFAT showed the ability of the fungal strain to utilize agricultural wastes (corn cob and rice straw) as a substrate. Also, yeast extract was the best nitrogen source for enhancing cellulase productivity. The most significant variables were determined by Plackett-Burman Design (PBD) and their concentrations were optimized by Response Surface Methodology (RSM) using Box-Behnken Design (BBD). Among eleven independent variables screened by PBD, malt extract, (NH4)2SO4, and KCl were the most significant ones followed by rice straw which affected cellulase production positively. The ANOVA results particularly the R2-value of PBD (0.9879) and BBD (0.9883) confirmed the model efficiency and provided a good interpretation of the experiments. PBD and BBD improved cellulase productivity by 6.1-fold greater than that obtained from OFAT. Medium optimization using OFAT and statistical models increased cellulase production from A. terreus MN901491 by 9.3-fold compared to the non-optimized medium. Moreover, the efficiency of cellulase activity on cotton fabrics as a bio-additive detergent was evaluated and estimated using whiteness and scanning electron microscope (SEM) that affirmed its potential effect and remarkable detergent ability to improve whiteness by 200% in comparison with non-washed fabric and by 190% in comparison with fabric washed by water.

CONCLUSION

The presented work was stabilized as a multi-efficiency in which wastes were used to produce cellulase enzyme from the fungal strain, Aspergillus terreus MN901491 as a bio-additive to detergent applications that involved ecofriendly and green processes.

Thermophilic biocatalysts for one-step conversion of citrus waste into lactic acid

Agri-food residues offer significant potential as a raw material for the production of L-lactic acid through microbial fermentation. Weizmannia coagulans, previously known as Bacillus coagulans, is a spore-forming, lactic acid-producing, gram-positive, with known probiotic and prebiotic properties. This study aimed to evaluate the feasibility of utilizing untreated citrus waste as a sustainable feedstock for the production of L-lactic acid in a one-step process, by using the strain W. coagulans MA-13. By employing a thermophilic enzymatic cocktail (Cellic CTec2) in conjunction with the hydrolytic capabilities of MA-13, biomass degradation was enhanced by up to 62%. Moreover, batch and fed-batch fermentation experiments demonstrated the complete fermentation of glucose into L-lactic acid, achieving a concentration of up to 44.8 g/L. These results point to MA-13 as a microbial cell factory for one-step production of L-lactic acid, by combining cost-effective saccharification with MA-13 fermentative performance, on agri-food wastes. Moreover, the potential of this approach for sustainable valorization of agricultural waste streams is successfully proven. KEY POINTS: • Valorization of citrus waste, an abundant residue in Mediterranean countries. • Sustainable production of the L-( +)-lactic acid in one-step process. • Enzymatic pretreatment is a valuable alternative to the use of chemical.

Nondairy food applications of whey and milk permeates: Direct and indirect uses

Permeates are generated in the dairy industry as byproducts from the production of high-protein products (e.g., whey or milk protein isolates and concentrates). Traditionally, permeate was disposed of as waste or used in animal feed, but with the recent move toward a "zero waste" economy, these streams are being recognized for their potential use as ingredients, or as raw materials for the production of value-added products. Permeates can be added directly into foods such as baked goods, meats, and soups, for use as sucrose or sodium replacers, or can be used in the production of prebiotic drinks or sports beverages. In-direct applications generally utilize the lactose present in permeate for the production of higher value lactose derivatives, such as lactic acid, or prebiotic carbohydrates such as lactulose. However, the impurities present, short shelf life, and difficulty handling these streams can present challenges for manufacturers and hinder the efficiency of downstream processes, especially compared to pure lactose solutions. In addition, the majority of these applications are still in the research stage and the economic feasibility of each application still needs to be investigated. This review will discuss the wide variety of nondairy, food-based applications of milk and whey permeates, with particular focus on the advantages and disadvantages associated with each application and the suitability of different permeate types (i.e., milk, acid, or sweet whey).

A comprehensive review on polylactic acid (PLA) - Synthesis, processing and application in food packaging

Plastics play an essential role in food packaging; their primary function is to preserve the nature of the food, ensure adequate shelf life and ensure food safety. Plastics are being produced on a global scale in excess of 320 million tonnes annually, with demand rising to reflect the material in wide range of applications. Nowadays, the packaging industry is a significant consumer of synthetic plastic made from fossil fuels. Petrochemical-based plastics are regarded as the preferred material for packaging. Nonetheless, using these plastics in large quantities results in a long-standing environment. Environmental pollution and the depletion of fossil fuels have prompted researchers and manufacturers to develop eco-friendly biodegradable polymers to replace petrochemical-based polymers. As a result, the production of eco-friendly food packaging material has sparked increased interest as a viable alternative to petrochemical-based polymers. Polylactic acid (PLA) is one of the compostable thermoplastic biopolymers that is biodegradable and renewable in nature. High-molecular-weight PLA can be used to produce fibres, flexible, non-wovens, hard and durable materials (100,000 Da or even higher).The chapter focuses on food packaging techniques, food industry waste, biopolymers, their classification, PLA synthesis, the importance of PLA properties for food packaging, and technologies used to process PLA in food packaging.

Construction of a machine-learning model to predict the optimal gene expression level for efficient production of D-lactic acid in yeast

The modification of gene expression is being researched in the production of useful chemicals by metabolic engineering of the yeast Saccharomyces cerevisiae. When the expression levels of many metabolic enzyme genes are modified simultaneously, the expression ratio of these genes becomes diverse; the relationship between the gene expression ratio and chemical productivity remains unclear. In other words, it is challenging to predict phenotypes from genotypes. However, the productivity of useful chemicals can be improved if this relationship is clarified. In this study, we aimed to construct a machine-learning model that can be used to clarify the relationship between gene expression levels and D-lactic acid productivity and predict the optimal gene expression level for efficient D-lactic acid production in yeast. A machine-learning model was constructed using data on D-lactate dehydrogenase and glycolytic genes expression (13 dimensions) and D-lactic acid productivity. The coefficient of determination of the completed machine-learning model was 0.6932 when using the training data and 0.6628 when using the test data. Using the constructed machine-learning model, we predicted the optimal gene expression level for high D-lactic acid production. We successfully constructed a machine-learning model to predict both D-lactic acid productivity and the suitable gene expression ratio for the production of D-lactic acid. The technique established in this study could be key for predicting phenotypes from genotypes, a problem faced by recent metabolic engineering strategies.

Advanced strategies for constructing interfacial tissues of bone and tendon/ligament

Enthesis, the interfacial tissue between a tendon/ligament and bone, exhibits a complex histological transition from soft to hard tissue, which significantly complicates its repair and regeneration after injury. Because traditional surgical treatments for enthesis injury are not satisfactory, tissue engineering has emerged as a strategy for improving treatment success. Rapid advances in enthesis tissue engineering have led to the development of several strategies for promoting enthesis tissue regeneration, including biological scaffolds, cells, growth factors, and biophysical modulation. In this review, we discuss recent advances in enthesis tissue engineering, particularly the use of biological scaffolds, as well as perspectives on the future directions in enthesis tissue engineering.

The Production of Pyruvate in Biological Technology: A Critical Review

Pyruvic acid has numerous applications in the food, chemical, and pharmaceutical industries. The high costs of chemical synthesis have prevented the extensive use of pyruvate for many applications. Metabolic engineering and traditional strategies for mutation and selection have been applied to microorganisms to enhance their ability to produce pyruvate. In the past decades, different microbial strains were generated to enhance their pyruvate production capability. In addition to the development of genetic engineering and metabolic engineering in recent years, the metabolic transformation of wild-type yeast, E. coli, and so on to produce high-yielding pyruvate strains has become a hot spot. The strategy and the understanding of the central metabolism directly related to pyruvate production could provide valuable information for improvements in fermentation products. One of the goals of this review was to collect information regarding metabolically engineered strains and the microbial fermentation processes used to produce pyruvate in high yield and productivity.

A Selective Fluorescent l-Lactate Biosensor Based on an l-Lactate-Specific Transcription Regulator and Förster Resonance Energy Transfer

Selective detection of l-lactate levels in foods, clinical, and bacterial fermentation samples has drawn intensive attention. Many fluorescent biosensors based on non-stereoselective recognition elements have been developed for lactate detection. Herein, the allosteric transcription factor STLldR from Salmonella enterica serovar Typhimurium LT2 was identified to be stereo-selectively respond to l-lactate. Then, STLldR was combined with Förster resonance energy transfer (FRET) to construct a fluorescent l-lactate biosensor FILLac. FILLac was further optimized by truncating the N- and C-terminal amino acids of STLldR between cyan and yellow fluorescent proteins. The optimized biosensor FILLac10N0C exhibited a maximum emission ratio change (ΔRmax) of 33.47 ± 1.91%, an apparent dissociation constant (Kd) of 6.33 ± 0.79 μM, and a limit of detection of 0.68 μM. FILLac10N0C was applied in 96-well microplates to detect l-lactate in bacterial fermentation samples and commercial foods such as Jiaosu and yogurt. The quantitation results of FILLac10N0C exhibited good agreement with that of a commercial l-lactate biosensor SBA-40D bioanalyzer. Thus, the biosensor FILLac10N0C compatible with high-throughput detection may be a potential choice for quantitation of l-lactate in different biological samples.

Prospective bacterial and fungal sources of hyaluronic acid: A review

The unique biological and rheological properties make hyaluronic acid a sought-after material for medicine and cosmetology. Due to very high purity requirements for hyaluronic acid in medical applications, the profitability of streptococcal fermentation is reduced. Production of hyaluronic acid by recombinant systems is considered a promising alternative. Variations in combinations of expressed genes and fermentation conditions alter the yield and molecular weight of produced hyaluronic acid. This review is devoted to the current state of hyaluronic acid production by recombinant bacterial and fungal organisms.

Context-dependent differences in the functional responses of Lactobacillaceae strains to fermentable sugars

Lactobacillaceae are Gram-positive rods, facultative anaerobes, and belong to the lactic acid bacteria (LAB) that frequently serve as probiotics. We systematically compared five LAB strains for the effects of different carbohydrates on their free-living and biofilm lifestyles. We found that fermentable sugars triggered an altered carrying capacity with strain specificity during planktonic growth. In addition, heterogeneous response to fermentable sugar was manifested in microbial aggregation (measured by imaging flow cytometry), colony development, and attachment to mucin. The acid production capacities of the strains were compatible and could not account for heterogeneity in their differential carrying capacity in liquid and on a solid medium. Among tested LAB strains, L. paracasei, and L. rhamnosus GG survived self-imposed acid stress while L. acidophilus was extremely sensitive to its own glucose utilization acidic products. The addition of a buffering system during growth on a solid medium significantly improved the survival of most tested probiotic strains during fermentation, but the formation of biofilms and aggregation capacity were responsive to the carbohydrate provided rather than to the acidity. We suggest that the optimal performance of the beneficial microbiota members belonging to Lactobacillaceae varies as a function of the growth model and the dependency on a buffering system.

Mitigating gas emissions from poultry litter composting with waste vinegar residue

The composting process is important in the recycling of organic wastes produced in agriculture, food, and municipal waste management. This study explored the suitability of using waste vinegar residue (WVR) as an amendment in poultry litter (PL) composting. Four treatments, including poultry litter (CK), poultry litter+vinegar residue (VR), poultry litter+vinegar residue+lime (VR_Ca) and poultry litter+vinegar residue+biochar (VR_B), were conducted. During a 42-day composting period, the dynamics of carbon dioxide (CO₂), ammonia (NH₃), nitrous oxide (N₂O) and methane (CH₄) emissions, as well as the physicochemical properties and abundances of the bacteria and fungi of the feedstock were tracked to examine the potential barriers in the co-composting of WVR and PL. Compared to those of the CK, using a WVR amendment lowered the pH, increased the electrical conductivity significantly at the early stage, resulted in a strong inhibition of bacterial and fungal growth and delayed the thermophilic period of poultry litter composting while significantly reducing NH₃ and N₂O and GHG (CO₂-e) emissions. A preadjustment of the WVR with alkaline biochar or lime lengthened the thermophilic period and increased the germination index (GI) by alleviating the inhibitory effect of the WVR on bacterial and fungal growth during composting. However, such preadjustment might reduce the mitigation effect on NH₃. In conclusion, WVR can be recycled through co-composting with poultry litter, and the additional mitigation of N losses and N conservation can be achieved without halting compost quality.

Lactic acid production from food waste hydrolysate by Lactobacillus pentosus: Focus on nitrogen supplementation, initial sugar concentration, pH, and fed-batch fermentation

Lactic acid production from food waste via fermentation is environmentally sustainable. However, the characteristics of food waste fermentation to produce lactic acid are not well understood due to the complexity of food waste. This study aims to understand the effects of key variables on the characteristics of food waste fermentation to maximize lactic acid production. Food waste was enzymatically hydrolyzed and fermented by Lactobacillus pentosus. Key fermentation variables, including nitrogenous nutrient supplementation, initial sugar concentration, and pH, were investigated in batch fermentation to unveil their effects on fermentation titer, yield, and productivity. The results showed that supplementation of 0.25% (w/v%) yeast extract and peptone to the food waste fermentation media significantly improved fermentation titer and productivity, but further increase in the supplementation level did not improve fermentation. Increasing the initial sugar concentration from 40 g/L to 100 g/L increased the fermentation titer from 41.0 g/L to 93.0 g/L and productivity from 0.34 g/L/h to 0.76 g/L/h. pH 6.0 was the optimal pH for the fermentation. At the optimal conditions, food waste fermentation resulted in the highest fermentation titer, yield, and productivity of 106.7 g/L, 1.12 g/g, and 3.09 g/L/h, respectively. The high fermentation yield of 1.12 g/g might be explained by the extra lactic acid production from unidentified compounds in food waste hydrolysates. By applying fed-batch fermentation, the lactic acid concentration reached 157.0 g/L with a yield and overall productivity of 0.92 g/g and 2.0 g/L/h, respectively. Based on the mass balance, a total of 251 kg lactic acid was produced from 1000 kg food waste. PRACTICAL APPLICATION: Food waste is one of the largest municipal solid wastes in the US, and most food waste ends up in landfills, causing significant economic losses and environmental concerns. In this study, we developed a fermentation process to convert food waste into biorenewable lactic acid and demonstrated that food waste is a superior feedstock for fermentation due to its embedded nutrients. Moreover, due to the embedded nutrients in food waste, the supplementation of yeast extract and peptone to fermentation can be reduced by over 50%, which can reduce the operating cost of lactic acid fermentation on an industrial scale.

A d,l-lactate biosensor based on allosteric transcription factor LldR and amplified luminescent proximity homogeneous assay

Lactate, a hydroxycarboxylic acid commercially produced by microbial fermentation, is widely applied in diverse industrial fields. Lactate exists in two stereoisomeric forms (d-lactate and l-lactate). d-Lactate and l-lactate are often simultaneously present in many biological samples. Therefore, a biosensor able to detect both d- and l-lactate is required but previously unavailable. Herein, an allosteric transcription factor LldR from Pseudomonas aeruginosa PAO1, which responds to both d-lactate and l-lactate, was combined with amplified luminescent proximity homogeneous assay technology to develop a d,l-lactate biosensor. The proposed biosensor was optimized by mutation of DNA sequence in binding site of LldR. The optimized biosensor B_Lac-6 can accurately detect the concentration of lactate independent on ratio of the two isomers in pending test samples. The biosensor was also tentatively used in quantitative analysis of d-lactate, l-lactate, or d,l-lactate in fermentation samples produced by three recombinant strains of Klebsiella oxytoca. With its desirable properties, the biosensor B_Lac-6 may be a potential choice for monitoring the concentration of lactate during industrial fermentation.

Comprehensive Review on Potential Contamination in Fuel Ethanol Production with Proposed Specific Guideline Criteria

Ethanol is a promising biofuel that can replace fossil fuel, mitigate greenhouse gas (GHG) emissions, and represent a renewable building block for biochemical production. Ethanol can be produced from various feedstocks. First-generation ethanol is mainly produced from sugar- and starch-containing feedstocks. For second-generation ethanol, lignocellulosic biomass is used as a feedstock. Typically, ethanol production contains four major steps, including the conversion of feedstock, fermentation, ethanol recovery, and ethanol storage. Each feedstock requires different procedures for its conversion to fermentable sugar. Lignocellulosic biomass requires extra pretreatment compared to sugar and starch feedstocks to disrupt the structure and improve enzymatic hydrolysis efficiency. Many pretreatment methods are available such as physical, chemical, physicochemical, and biological methods. However, the greatest concern regarding the pretreatment process is inhibitor formation, which might retard enzymatic hydrolysis and fermentation. The main inhibitors are furan derivatives, aromatic compounds, and organic acids. Actions to minimize the effects of inhibitors, detoxification, changing fermentation strategies, and metabolic engineering can subsequently be conducted. In addition to the inhibitors from pretreatment, chemicals used during the pretreatment and fermentation of byproducts may remain in the final product if they are not removed by ethanol distillation and dehydration. Maintaining the quality of ethanol during storage is another concerning issue. Initial impurities of ethanol being stored and its nature, including hygroscopic, high oxygen and carbon dioxide solubility, influence chemical reactions during the storage period and change ethanol’s characteristics (e.g., water content, ethanol content, acidity, pH, and electrical conductivity). During ethanol storage periods, nitrogen blanketing and corrosion inhibitors can be applied to reduce the quality degradation rate, the selection of which depends on several factors, such as cost and storage duration. This review article sheds light on the techniques of control used in ethanol fuel production, and also includes specific guidelines to control ethanol quality during production and the storage period in order to preserve ethanol production from first-generation to second-generation feedstock. Finally, the understanding of impurity/inhibitor formation and controlled strategies is crucial. These need to be considered when driving higher ethanol blending mandates in the short term, utilizing ethanol as a renewable building block for chemicals, or adopting ethanol as a hydrogen carrier for the long-term future, as has been recommended.

Application of solid-state fermentation by microbial biotechnology for bioprocessing of agro-industrial wastes from 1970 to 2020: A review and bibliometric analysis

This paper reviews the pertinent literature from 1970 to 2020 and presents a bibliometric analysis of research trends in the application of solid-state fermentation in the bioprocessing of agro-industrial wastes. A total 5630 publications of studies on solid-state fermentation that comprised of 5208 articles (92.50%), 340 book chapters (6.04%), 39 preprints (0.69%), 32 proceedings (0.56%), 8 edited books (0.14%) and 3 monographs (0.05%) were retrieved from Dimensions database. A review of the literature indicated that (i) fermentation of solid substrates is variously defined in the literature over the past 50 years, where "solid-state fermentation" is the most dominant research term used, and (ii) key products derived from the valorization of agro-industrial wastes through solid-state fermentation include, among others, enzymes, antioxidants, animal feed, biofuel, organic acids, biosurfactants, etc. Bibliometric analyses with VOSviewer revealed an astronomic increase in publications between 2000 and 2020, and further elucidated the most frequently explored core research topics, the most highly cited publications and authors, and countries/regions with the highest number of citations. The most cited publication between 2010 and 2020 had 382 citations compared to 725 citations for the most cited publication from 1970 to 2020. Ashok Pandey from India was the most published and cited author with 123 publications and 8,613 citations respectively; whereas Bioresource Technology was the most published and cited journal with 233 publications and 12,394 citations. Countries with the most publications and citations are Brazil, France, India, and Mexico. These findings suggest that research in the application of solid-state fermentation for bioprocessing of agro-industrial wastes has gained prominence over the past 50 years. Future perspectives and implications are discussed.

A Comparative Analysis of Weizmannia coagulans Genomes Unravels the Genetic Potential for Biotechnological Applications

The production of biochemicals requires the use of microbial strains with efficient substrate conversion and excellent environmental robustness, such as Weizmannia coagulans species. So far, the genomes of 47 strains have been sequenced. Herein, we report a comparative genomic analysis of nine strains on the full repertoire of Carbohydrate-Active enZymes (CAZymes), secretion systems, and resistance mechanisms to environmental challenges. Moreover, Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) immune system along with CRISPR-associated (Cas) genes, was also analyzed. Overall, this study expands our understanding of the strain's genomic diversity of W. coagulans to fully exploit its potential in biotechnological applications.

Molecular genetics for probiotic engineering: dissecting lactic acid bacteria

The composition of the gut microbiome is greatly influenced by nutrition and dietary alterations which can also induce large temporary microbial shifts. However, the molecular mechanisms that promote these changes remain to be determined. Species of the family Lactobacillaceae and Bacillus species are genetically manipulatable bacteria that are naturally found in the human gastrointestinal (GI) tract and are often considered models of beneficial microbiota. Here, we identify specific conserved molecular pathways that play a key role in host colonization by beneficial members of the microbiota. In particular, we highlight three pathways important to the success of lactic acid bacteria (LAB) in the GI tract: glycolysis and fermentation, microbial communication via membrane vesicles, and condition-dependent antibiotic production. We elaborate on how the understanding of these circuits can lead to the development of novel therapeutic approaches to combat GI tract infections.

Lactic fermentation of grain sorghum: effect of variety and pretreatment on the production of lactic acid and biomass

Grain sorghum is a viable feedstock for lactic acid fermentation; however, tannins contained in some varieties affect the efficiency of hydrolysis and fermentation. This work objective was to assess the effect of pre-treatment of grain sorghum on the production of lactic acid and biomass after fermentation. Sorghum varieties with low, medium, and high tannins were pretreated, enzymatically hydrolyzed, and fermented with Lactobacillus casei. The pre-treatments consisted of cooking the grains in lime, cooking in plain water, and no treatment (control). Pretreated sorghum flours were hydrolyzed using thermostable α-amylase from Bacillus licheniformis and amyloglucosidase from Aspergillus niger. Lime pre-treatment showed a significant improvement in protein content, digestibility, and lactic acid production after fermentation, in relation to the non-treated samples. Although differences were not significant for low and medium tannins, lime treatment increase lactic acid production for the cooked-in-lime high-tannin sorghum in relation to the control. For this sorghum/treatment combination, the lactic acid production was 138 g/L, with a volumetric productivity of 1.57 g/L·h and 85/100 g yield based on initial starch, which is equivalent to 69 g of lactic acid per 100 g of sorghum d.b.

Evaluation of By-Products of Potato Peel as Food Additive

Abstract:

The potato plant is an important food source produced all over the world and it provides a significant portion of daily energy intake in nourishment. In addition, a significant rate of vitamins, fibre, mineral matters, protein, and fat can be obtained by consuming potato. In this study, the production, consumption, and usage areas of potato, a crucial source of our diet, and the possibilities of using it as food additives with the nutritional properties of its peel have been investigated. Generally, potato is consumed after its peel is removed in the homes and industrial areas and many of these peels are disposed off as wastes. Studies show that potato peel has a high content of dietary fibre, protein, carbohydrate, mineral matters, vitamin, phenolic, and antioxidant. The use of potato peel as food additives have also been discussed in this study.

Effects of temperature and total solid content on biohydrogen production from dark fermentation of rice straw: Performance and microbial community characteristics

Semi-continuous experiments were carried out in lab-scale continuous stirred tank reactors to evaluate the effects of fermentation temperature (37 ± 1 °C and 55 ± 1 °C) and total solids (TS) contents (3 %, 6 %, and 12 %) on biohydrogen production from the dark fermentations (DF) of rice straw (RS) and the total operation duration was 105 days. The experimental results show that biohydrogen production (0.46-63.60 mL/g VS_added) from the thermophilic (55 ± 1 °C) DF (TDF) was higher than the mesophilic (37 ± 1 °C) DF (MDF) (0.19-2.13 mL/g VS_added) at the three TS contents, and achieved the highest of 63.60 ± 2.98 mL/g VS_added at TS = 6 % in TDF. The pH, NH₄⁺-N and total volatile fatty acid of fermentation liquids in the TDF were all higher than those in the MDF. The high abundance of lactic acid-producing bacteria resulted in low biohydrogen produced at TS = 3 %. Under the TDF with TS = 6 %, the highest abundance of hydrolytic bacteria (Ruminiclostridium 54.24 %) led to the highest biohydrogen production. The increase of TS content from 6 % to 12 % induced degradation pathway changes from biohydrogen production to methane production. This study demonstrated that butyric acid fermentation was the main pathway to produce biohydrogen from RS in both DFs.

The metabolic potential of plastics as biotechnological carbon sources - Review and targets for the future

The plastic crisis requires drastic measures, especially for the plastics' end-of-life. Mixed plastic fractions are currently difficult to recycle, but microbial metabolism might open new pathways. With new technologies for degradation of plastics to oligo- and monomers, these carbon sources can be used in biotechnology for the upcycling of plastic waste to valuable products, such as bioplastics and biosurfactants. We briefly summarize well-known monomer degradation pathways and computed their theoretical yields for industrially interesting products. With this information in hand, we calculated replacement scenarios of existing fossil-based synthesis routes for the same products. Thereby, we highlight fossil-based products for which plastic monomers might be attractive alternative carbon sources. Notably, not the highest yield of product on substrate of the biochemical route, but rather the (in-)efficiency of the petrochemical routes (i.e., carbon, energy use) determines the potential of biochemical plastic upcycling. Our results might serve as a guide for future metabolic engineering efforts towards a sustainable plastic economy.

Multi-product biorefinery from Arthrospira platensis biomass as feedstock for bioethanol and lactic acid production

With the aim to reach the maximum recovery of bulk and specialty bioproducts while minimizing waste generation, a multi-product biorefinery for ethanol and lactic acid production from the biomass of cyanobacterium Arthrospira platensis was investigated. Therefore, the residual biomass resulting from different pretreatments consisting of supercritical fluid extraction (SF) and microwave assisted extraction with non-polar (MN) and polar solvents (MP), previously applied on A. platensis to extract bioactive metabolites, was further valorized. In particular, it was used as a substrate for fermentation with Saccharomyces cerevisiae LPB-287 and Lactobacillus acidophilus ATCC 43121 to produce bioethanol (BE) and lactic acid (LA), respectively. The maximum concentrations achieved were 3.02 ± 0.07 g/L of BE by the MN process at 120 rpm 30 °C, and 9.67 ± 0.05 g/L of LA by the SF process at 120 rpm 37 °C. An economic analysis of BE and LA production was carried out to elucidate the impact of fermentation scale, fermenter costs, production titer, fermentation time and cyanobacterial biomass production cost. The results indicated that the critical variables are fermenter scale, equipment cost, and product titer; time process was analyzed but was not critical. As scale increased, costs tended to stabilize, but also more product was generated, which causes production costs per unit of product to sharply decrease. The median value of production cost was US$ 1.27 and US$ 0.39, for BE and LA, respectively, supporting the concept of cyanobacterium biomass being used for fermentation and subsequent extraction to obtain ethanol and lactic acid as end products from A. platensis.

Use of glycerol waste in lactic acid bacteria metabolism for the production of lactic acid: State of the art in Poland

Lactic acid is a naturally existing organic acid, which may be used in many different branches of industrial application. It can be made in the sugar fermentation process from renewable raw lactic acid, which is an indispensable raw material, including in the agricultural, food, and pharmaceutical industries. It is an ecological product that has enjoyed great popularity in recent years. In 2010, the US Department of Energy published a report about lactic acid to be a potential building element for future technology, whose demand grows year by year. The lactic acid molecule naturally exists in plants, microorganisms, and animals and can also be produced by carbohydrate fermentation or chemical synthesis from coal, petroleum products, and natural gas. In industry, lactic acid can be produced by chemical synthesis or fermentation. Although racemic lactic acid is always produced chemically from petrochemical sources, the optically pure L(+) – or D(−) – lactic acid forms can be obtained by microbial fermentation of renewable resources when an appropriate microorganism is selected. Depending on the application, one form of optically pure LA is preferred over the other. Additionally, microbial fermentation offers benefits including cheap renewable substrates, low production temperatures, and low energy consumption. Due to these advantages, the most commonly used biotechnological production process with the use of biocatalysts, i.e., lactic acid bacteria. The cost of raw materials is one of the major factors in the economic production of lactic acid. As substrate costs cannot be reduced by scaling up the process, extensive research is currently underway to find new substrates for the production of LA. These searches include starch raw materials, lignocellulosic biomass, as well as waste from the food and refining industries. Here, the greatest attention is still drawn to molasses and whey as the largest sources of lactose, vitamins, and carbohydrates, as well as glycerol – a by-product of the biodiesel component production process. Focusing on the importance of lactic acid and its subsequent use as a product, but also a valuable raw material for polymerization (exactly to PLA), this review summarizes information about the properties and applications of lactic acid, as well as about its production and purification processes. An industrial installation for the production of lactic acid is only planned to be launched in Poland. As of today, there is no commercial-scale production of this bio-raw material. Thus, there is great potential for the application of the lactic acid production technology and research should be carried out on its development.

Recent Advances in Lactic Acid Production by Lactic Acid Bacteria

Lactic acid can synthesize high value-added chemicals such as poly lactic acid. In order to further minimize the cost of lactic acid production, some effective strategies (e.g., effective mutagenesis and metabolic engineering) have been applied to increase productive capacity of lactic acid bacteria. In addition, low-cost cheap raw materials (e.g., cheap carbon source and cheap nitrogen source) are also used to reduce the cost of lactic acid production. In this review, we summarized the recent developments in lactic acid production, including efficient strain modification technology (high-efficiency mutagenesis means, adaptive laboratory evolution, and metabolic engineering), the use of low-cost cheap raw materials, and also discussed the future prospects of this field, which could promote the development of lactic acid industry.

Enzymes, In Vivo Biocatalysis, and Metabolic Engineering for Enabling a Circular Economy and Sustainability

Since the industrial revolution, the rapid growth and development of global industries have depended largely upon the utilization of coal-derived chemicals, and more recently, the utilization of petroleum-based chemicals. These developments have followed a linear economy model (produce, consume, and dispose). As the world is facing a serious threat from the climate change crisis, a more sustainable solution for manufacturing, i.e., circular economy in which waste from the same or different industries can be used as feedstocks or resources for production offers an attractive industrial/business model. In nature, biological systems, i.e., microorganisms routinely use their enzymes and metabolic pathways to convert organic and inorganic wastes to synthesize biochemicals and energy required for their growth. Therefore, an understanding of how selected enzymes convert biobased feedstocks into special (bio)chemicals serves as an important basis from which to build on for applications in biocatalysis, metabolic engineering, and synthetic biology to enable biobased processes that are greener and cleaner for the environment. This review article highlights the current state of knowledge regarding the enzymatic reactions used in converting biobased wastes (lignocellulosic biomass, sugar, phenolic acid, triglyceride, fatty acid, and glycerol) and greenhouse gases (CO₂ and CH₄) into value-added products and discusses the current progress made in their metabolic engineering. The commercial aspects and life cycle assessment of products from enzymatic and metabolic engineering are also discussed. Continued development in the field of metabolic engineering would offer diversified solutions which are sustainable and renewable for manufacturing valuable chemicals.

Polylactic acid production from biotechnological routes: A review

Polylactic acid (PLA) has been highlighted as an important polymer due to its high potential for applicability in various areas, such as in the chemical, medical, pharmaceutical or biotechnology field. Very recently, studies have reported its use as a basic component for the production of personal protective equipment (PPE) required for the prevention of Sars-Cov-2 contamination, responsible for the cause of coronavirus disease, which is currently a major worldwide sanitary and social problem. PLA is considered a non-toxic, biodegradable and compostable plastic with interesting characteristics from the industrial point of view, and it emerges as a promising product under the concept of "green plastic", since most of the polymers produced currently are petroleum-based, a non-renewable raw material. Biotechnology routes have been mentioned as potential methodologies for the production of this polymer, especially by enzymatic routes, in particular by use of lipases enzymes. The availability of pure lactic acid isomers is a fundamental aspect of the manufacture of PLA with more interesting mechanical and thermal properties. Due to the technological importance that PLA-based polymers are acquiring, as well as their characteristics and applicability in several fields, especially medical, pharmaceutical and biotechnology, this review article sought to gather very recent information regarding the development of research in this area. The main highlight of this study is that it was carried out from a biotechnological point of view, aiming at a totally green bioplastic production, since the obtaining of lactic acid, which will be used as raw material for the PLA synthesis, until the degradation of the polymer obtained by biological routes.

Production of L (+) Lactic Acid by Lactobacillus casei Ke11: Fed Batch Fermentation Strategies

Lactic acid and its derivatives are widely used in pharmaceutical, leather, textile and food industries. However, until now there have been few systematic reports on fed-batch fermentation for efficient production and high concentration of l-lactic acid by lactic acid bacteria. This study describes the obtainment of L (+) lactic acid from sucrose using the Lactobacillus casei Ke11 strain through different feeding strategies using an accessible pH neutralizer such as CaCO3. The exponential feeding strategy can increase lactic acid production and productivity (175.84 g/L and 3.74 g/L/h, respectively) with a 95% yield, avoiding inhibition by high initial substrate concentration and, combined with the selected agent controller, avoids the cellular stress that could be caused by the high osmotic pressure of the culture media. The purification of the acid using charcoal and celite, followed by the use of a cation exchange column proved to be highly efficient, allowing a high yield of lactic acid, high removal of sugars and proteins. The described process shows great potential for the production of lactic acid, as well as the simple, efficient and low-cost purification method. This way, this work is useful to the large-scale fermentation of L. casei Ke11 for production of l-lactic acid.

Production of nisin and lactic acid from the starch of sweet potato by simultaneous saccharification and fermentation with two stage pH adjustment

Nisin is an antimicrobial peptide which is widely used as preservative, while lactic acid is a natural organic acid applied in the food industry. The aim of this work was to study the process for nisin and lactic acid production from starch of sweet potato with simultaneous saccharification and fermentation (SSF) by Lactococcus lactis subsp. Lactis with two stage pH adjustment. The factors impacting the nisin and lactic acid production including starch concentration, glucosidase concentration, CaCO₃ and Tween-80 were studied. The nisin titre reached a high of 2516.41 IU/mL, while the lactic acid reached a high of 37.06 g/L when the optimal conditions were 40 g/L starch, 100 U glucosidase/g starch, 2.5% CaCO₃ and 1 mL/L Tween-80. The lactic acid and nisin were separated by a two stage pH adjustment at last. The SSF of starch from sweet potato coupled with a two stage pH adjustment is a promising method to produce nisin and lactic acid.

nZVI Impacts Substrate Conversion and Microbiome Composition in Chain Elongation From D- and L-Lactate Substrates

Medium-chain carboxylates (MCC) derived from biomass biorefining are attractive biochemicals to uncouple the production of a wide array of products from the use of non-renewable sources. Biological conversion of biomass-derived lactate during secondary fermentation can be steered to produce a variety of MCC through chain elongation. We explored the effects of zero-valent iron nanoparticles (nZVI) and lactate enantiomers on substrate consumption, product formation and microbiome composition in batch lactate-based chain elongation. In abiotic tests, nZVI supported chemical hydrolysis of lactate oligomers present in concentrated lactic acid. In fermentation experiments, nZVI created favorable conditions for either chain-elongating or propionate-producing microbiomes in a dose-dependent manner. Improved lactate conversion rates and n-caproate production were promoted at 0.5-2 g nZVI⋅L^-1 while propionate formation became relevant at ≥ 3.5 g nZVI⋅L^-1. Even-chain carboxylates (n-butyrate) were produced when using enantiopure and racemic lactate with lactate conversion rates increased in nZVI presence (1 g⋅L^-1). Consumption of hydrogen and carbon dioxide was observed late in the incubations and correlated with acetate formation or substrate conversion to elongated products in the presence of nZVI. Lactate racemization was observed during chain elongation while isomerization to D-lactate was detected during propionate formation. Clostridium luticellarii, Caproiciproducens, and Ruminococcaceae related species were associated with n-valerate and n-caproate production while propionate was likely produced through the acrylate pathway by Clostridium novyi. The enrichment of different potential n-butyrate producers (Clostridium tyrobutyricum, Lachnospiraceae, Oscillibacter, Sedimentibacter) was affected by nZVI presence and concentrations. Possible theories and mechanisms underlying the effects of nZVI on substrate conversion and microbiome composition are discussed. An outlook is provided to integrate (bio)electrochemical systems to recycle (n)ZVI and provide an alternative reducing power agent as durable control method.

Improvement of Enantiomeric l-Lactic Acid Production from Mixed Hexose-Pentose Sugars by Coculture of Enterococcus mundtii WX1 and Lactobacillus rhamnosus SCJ9

Among 39 pentose-utilizing lactic acid bacteria (LAB) selected from acid-forming bacteria from the midgut of Eri silkworm, the isolate WX1 was selected with the highest capability to produce optically pure l-lactic acid (l-LA) from glucose, xylose and arabinose with furfural-tolerant properties. The isolate WX1 was identified as Enterococcus mundtii based on 16S rDNA sequence analysis. The conversion yields of l-LA from glucose and xylose by E. mundtii WX1 were 0.97 and 0.68 g/g substrate, respectively. Furthermore, l-LA production by E. mundtii WX1 in various glucose-xylose mixtures indicated glucose repression effect on xylose consumption. The coculture of E. mundtii WX1 and Lactobacillus rhamnosus SCJ9, a homofermentative LAB capable of producing l-LA from glucose clearly showed an improvement of l-LA production from 30 g/L total glucose-xylose (6:4). The results from Plackett–Burman design (PBD) indicated that Tween 80, MnSO4 and yeast extract (YE) were three medium components that significantly influenced (p < 0.05) l-LA production using the coculture strategy in the presence of 2 g/L furfural. Optimal concentrations of these variables revealed by central composite design (CCD) and response surface methodology (RSM) were 20.61 g/L YE, 1.44 g/L Tween 80 and 1.27 g/L MnSO4. Based on the optimized medium with 30 g/L total glucose-xylose (6:4), the maximum experimental l-LA value of 23.59 g/L reflecting 0.76 g/g substrate were achieved from 48 h fermentation at 37 °C. l-LA produced by coculture cultivated under standard MRS medium and new optimized conditions were 1.28 and 1.53 times higher than that obtained from single culture by E. mundtii WX1, respectively. This study provides the foundations for practical applications of coculture in bioconversion of lignocellulose particularly glucose-xylose-rich corn stover to l-LA.