Surface micropatterning to regulate cell functions

Adhesion of retinal cells to gold surfaces by biomimetic molecules

Background

Neural cell-electrode coupling is crucial for effective neural and retinal prostheses. Enhancing this coupling can be achieved through surface modification and geometrical design to increase neuron-electrode proximity. In the current research, we focused on designing and studying various biomolecules as a method to elicit neural cell-electrode adhesion via cell-specific integrin mechanisms.

Methods

We designed extracellular matrix biomimetic molecules with different head sequences (RGD or YIGSR), structures (linear or cyclic), and spacer lengths (short or long). These molecules, anchored by a thiol (SH) group, were deposited onto gold surfaces at various concentrations. We assessed the modifications using contact angle measurements, fluorescence imaging, and X-ray Photoelectron Spectroscopy (XPS). We then analyzed the adhesion of retinal cells and HEK293 cells to the modified surfaces by measuring cell density, surface area, and focal adhesion spots, and examined changes in adhesion-related gene and integrin expression.

Results

Results showed that YIGSR biomolecules significantly enhanced retinal cell adhesion, regardless of spacer length. For HEK293 cells, RGD biomolecules were more effective, especially with cyclic RGD and long spacers. Both cell types showed increased expression of specific adhesion integrins and proteins like vinculin and PTK2; these results were in agreement with the adhesion studies, confirming the cell-specific interactions with modified surfaces.

Conclusion

This study highlights the importance of tailored biomolecules for improving neural cell adhesion to electrodes. By customizing biomolecules to foster specific and effective interactions with adhesion integrins, our study provides valuable insights for enhancing the integration and functionality of retinal prostheses and other neural implants.

Photo-reactive polymers for the immobilisation of epidermal growth factors

Photo-reactive polymers are important for biomaterials, including devices with a 3D-structure. Here, different types of photo-reactive polymers were prepared and utilised for immobilisation of growth factors. They were synthesised by conjugation of gelatin with the azidophenyl group or by copolymerisation of the azidophenyl group-coupled methacrylate with poly(ethylene glycol) methacrylate. The azidophenyl content and the zeta potential of the prepared polymers were measured. After spin coating of polymers, the thickness and the water contact angle of coated layers were measured. The amount of the immobilised epidermal growth factor (EGF) was determined using fluorescence labelling. Cell adhesion responded to the nature of photo-reactive polymers but did not depend on the immobilised EGF. However, cell growth was dependent on the amount of immobilised EGF and was significantly affected by the nature of photo-reactive polymers. The study shows that the properties of the photo-immobilisation matrix significantly influence the biological activity.

Scaffold Pore Curvature Influences ΜSC Fate through Differential Cellular Organization and YAP/TAZ Activity

Tissue engineering aims to repair, restore, and/or replace tissues in the human body as an alternative to grafts and prostheses. Biomaterial scaffolds can be utilized to provide a three-dimensional microenvironment to facilitate tissue regeneration. Previously, we reported that scaffold pore size influences vascularization and extracellular matrix composition both in vivo and in vitro, to ultimately influence tissue phenotype for regenerating cranial suture and bone tissues, which have markedly different tissue properties despite similar multipotent stem cell populations. To rationally design biomaterials for specific cell and tissue fate specification, it is critical to understand the molecular processes governed by cell-biomaterial interactions, which guide cell fate specification. Building on our previous work, in this report we investigated the hypothesis that scaffold pore curvature, the direct consequence of pore size, modulates the differentiation trajectory of mesenchymal stem cells (MSCs) through alterations in the cytoskeleton. First, we demonstrated that sufficiently small pores facilitate cell clustering in subcutaneous explants cultured in vivo, which we previously reported to demonstrate stem tissue phenotype both in vivo and in vitro. Based on this observation, we cultured cell-scaffold constructs in vitro to assess early time point interactions between cells and the matrix as a function of pore size. We demonstrate that principle curvature directly influences nuclear aspect and cell aggregation in vitro. Scaffold pores with a sufficiently low degree of principle curvature enables cell differentiation; pharmacologic inhibition of actin cytoskeleton polymerization in these scaffolds decreased differentiation, indicating a critical role of the cytoskeleton in transducing cues from the scaffold pore microenvironment to the cell nucleus. We fabricated a macropore model, which allows for three-dimensional confocal imaging and demonstrates that a higher principle curvature facilitates cell aggregation and the formation of a potentially protective niche within scaffold macropores which prevents MSC differentiation and retains their stemness. Sufficiently high principle curvature upregulates yes-associated protein (YAP) phosphorylation while decreased principle curvature downregulates YAP phosphorylation and increases YAP nuclear translocation with subsequent transcriptional activation towards an osteogenic differentiation fate. Finally, we demonstrate that the inhibition of the YAP/TAZ pathway causes a defect in differentiation, while YAP/TAZ activation causes premature differentiation in a curvature-dependent way when modulated by verteporfin (VP) and 1-oleyl-lysophosphatidic acid (LPA), respectively, confirming the critical role of biomaterials-mediated YAP/TAZ signaling in cell differentiation and fate specification. Our data support that the principle curvature of scaffold macropores is a critical design criterion which guides the differentiation trajectory of mesenchymal stem cells' scaffolds. Biomaterial-mediated regulation of YAP/TAZ may significantly contribute to influencing the regenerative outcomes of biomaterials-based tissue engineering strategies through their specific pore design.

Cold plasma surface treatments to prevent biofilm formation in food industries and medical sectors

Environmental conditions in food and medical fields enable the bacteria to attach and grow on surfaces leading to resistant bacterial biofilm formation. Indeed, the first step in biofilm formation is the bacterial irreversible adhesion. Controlling and inhibiting this adhesion is a passive approach to fight against biofilm development. This strategy is an interesting path in the inhibition of biofilm formation since it targets the first step of biofilm development. Those pathogenic structures are responsible for several foodborne diseases and nosocomial infections. Therefore, to face this public health threat, researchers employed cold plasma technologies in coating development. In this review, the different factors influencing the bacterial adhesion to a substrate are outlined. The goal is to present the passive coating strategies aiming to prevent biofilm formation via cold plasma treatments, highlighting antiadhesive elaborated surfaces. General aspects of surface treatment, including physico-chemical modification and application of cold plasma technologies, were also presented. KEY POINTS: • Factors surrounding pathogenic bacteria influence biofilm development. • Controlling bacterial adhesion prevents biofilm formation. • Materials can be coated via cold plasma to inhibit bacterial adhesion.

The Development of Design and Manufacture Techniques for Bioresorbable Coronary Artery Stents

Coronary artery disease (CAD) is the leading killer of humans worldwide. Bioresorbable polymeric stents have attracted a great deal of interest because they can treat CAD without producing long-term complications. Bioresorbable polymeric stents (BMSs) have undergone a sustainable revolution in terms of material processing, mechanical performance, biodegradability and manufacture techniques. Biodegradable polymers and copolymers have been widely studied as potential material candidates for bioresorbable stents. It is a great challenge to find a reasonable balance between the mechanical properties and degradation behavior of bioresorbable polymeric stents. Surface modification and drug-coating methods are generally used to improve biocompatibility and drug loading performance, which are decisive factors for the safety and efficacy of bioresorbable stents. Traditional stent manufacture techniques include etching, micro-electro discharge machining, electroforming, die-casting and laser cutting. The rapid development of 3D printing has brought continuous innovation and the wide application of biodegradable materials, which provides a novel technique for the additive manufacture of bioresorbable stents. This review aims to describe the problems regarding and the achievements of biodegradable stents from their birth to the present and discuss potential difficulties and challenges in the future.

Surface Creasing-Induced Micropatterned GelMA Using Heating-Hydration Fabrication for Effective Vascularization

BACKGROUND

Surface modification is used to modify the biomaterials for the regulation of cell culture using different approaches, such as chemical graft and mechanical treatment. However, those conventional methodologies often require precise fabrication in a high resolution involving either high cost or laborious steps to remove chemical residues that are toxic to the cells.

METHODS

A novel and simple method was proposed and evaluated to rapidly generate surface ceases on the gelatin methacrylate (gelMA) surface using the heating-hydration process. Human umbilical vein endothelial cells (HUVECs) were cultured on the gelMA surface. The surface binding was characterized using the RGD (Arg-Gly-Asp) antibodies and cell adhesion pattern captured by scanning electron microscopy. The effect of the heating-hydration parameters on the creasing formation was investigated. The morphology of HUVECs cultured on such micropatterned gelMA was characterized and compared.

RESULTS

It is found that the hydration solution, gelMA mixture, and hydration rate are the major factors that influence the cracking sizes in the range from 20 to 120 µm which resulted in capillary-like patterns on the gelMA surface. Low concentration of gelMA, high water concentration of cooling agent, and slow hydration rate result in the long creases, and heating of at least 60 min is required for complete dehydration. Strong fluorescence was around the creases with RGD-staining. Consequently, micropatterned gelMA demonstrated good biocompatibility with endothelial cells with more than 95% cell viability and continuous cell proliferation throughout 2 weeks as well as a good trace of neovascular formation. In comparison, normal gelMA surface did not exhibit RGD-fluorescent signals, and the cultured HUVECs on it were rounded with no spreading for network formation.

CONCLUSION

The heating-hydration approach can successfully and easily produce the micropatterned gelMA that allows rapid and effective vascularization to potentially improve the functionalities of the tissue-engineered construct.

Ion Beam Nanopatterning of Biomaterial Surfaces

Ion beam irradiation of solid surfaces may result in the self-organized formation of well-defined topographic nanopatterns. Depending on the irradiation conditions and the material properties, isotropic or anisotropic patterns of differently shaped features may be obtained. Most intriguingly, the periodicities of these patterns can be adjusted in the range between less than twenty and several hundred nanometers, which covers the dimensions of many cellular and extracellular features. However, even though ion beam nanopatterning has been studied for several decades and is nowadays widely employed in the fabrication of functional surfaces, it has found its way into the biomaterials field only recently. This review provides a brief overview of the basics of ion beam nanopatterning, emphasizes aspects of particular relevance for biomaterials applications, and summarizes a number of recent studies that investigated the effects of such nanopatterned surfaces on the adsorption of biomolecules and the response of adhering cells. Finally, promising future directions and potential translational challenges are identified.

A Membrane Filter-Assisted Mammalian Cell-Based Biosensor Enabling 3D Culture and Pathogen Detection

We have developed a membrane filter-assisted cell-based biosensing platform by using a polyester membrane as a three-dimensional (3D) cell culture scaffold in which cells can be grown by physical attachment. The membrane was simply treated with ethanol to increase surficial hydrophobicity, inducing the stable settlement of cells via gravity. The 3D membrane scaffold was able to provide a relatively longer cell incubation time (up to 16 days) as compared to a common two-dimensional (2D) cell culture environment. For a practical application, we fabricated a cylindrical cartridge to support the scaffold membranes stacked inside the cartridge, enabling not only the maintenance of a certain volume of culture media but also the simple exchange of media in a flow-through manner. The cartridge-type cell-based analytical system was exemplified for pathogen detection by measuring the quantities of toll-like receptor 1 (TLR1) induced by applying a lysate of P. aeruginosa and live E. coli, respectively, providing a fast, convenient colorimetric TLR1 immunoassay. The color images of membranes were digitized to obtain the response signals. We expect the method to further be applied as an alternative tool to animal testing in various research areas such as cosmetic toxicity and drug efficiency.

Large-Area Patterning of Oil-Based Inks on Superhydrophobic TiO2 Nanotubular Layers by Photocatalytic Wettability Conversion

Patterning an oil-based ink on a solid surface based on a wettability difference is of significant importance for the application of offset printing. Herein, we describe a large-area patterning of oil-based ink on a self-organized TiO2 nanotubular layer based on a photocatalytic wettability conversion. The TiO2 nanotubular layer was fabricated by electrochemical anodization, which demonstrated a superhydrophobic wettability after modification with a self-assembled molecular layer. Subsequently, area-selective ultraviolet (UV) irradiation through a pre-designed pattern of water-based UV-resistant ink formed by an ink-jet technique was used to form a wettability difference. After removing the water-based ink, an oil-based ink was capable of depositing selectively on the superhydrophobic area to form the same pattern as the pre-designed pattern of water-based ink. This large-area patterning of an oil-based ink based on the photocatalytic wettability conversion is potentially applicable in offset printing.

Influence of Titanium Alloy Scaffolds on Enzymatic Defense against Oxidative Stress and Bone Marrow Cell Differentiation

Studies have been directed towards the production of new titanium alloys, aiming for the replacement of Ti-6 Aluminium-4 Vanadium (TiAlV) alloy in the future. Many mechanisms related to biocompatibility and chemical characteristics have been studied in the field of implantology, but enzymatic defenses against oxidative stress remain underexplored. Bone marrow stromal cells have been explored as source of cells, which have the potential to differentiate into osteoblasts and therefore could be used as cells-based therapy. The objective of this study was to evaluate the activity of the antioxidant enzymes superoxide dismutase (SOD) and catalase (CAT) in porous scaffolds of Ti-6 Aluminium-4 Vanadium (TiAlV), Ti-35 Niobium (TiNb), and Ti-35 Niobium-7 Zirconium-5 Tantalum (TiNbZrTa) on mouse bone marrow stromal cells. Porous titanium alloy scaffolds were prepared by powder metallurgy. After 24 hours, cells plated on the scaffolds were analyzed by scanning electron microscopy (SEM). The antioxidant enzyme activity was measured 72 hours after cell plating. Quantitative real time PCR (qRT-PCR) was performed after 3, 7, and 14 days, and Runx2 (Runt-related transcription factor2) expression was evaluated. The SEM images showed the presence of interconnected pores and growth, adhesion, and cell spreading in the 3 scaffolds. Although differences were noted for SOD and CAT activity for all scaffolds analyzed, no statistical differences were observed (p > 0.05). The osteogenic gene Runx2 presented high expression levels for TiNbZrTa at day 7, compared to the control group (TiAlV day 3). At day 14, all scaffolds had more than 2-fold induction for Runx2 mRNA levels, with statistically significant differences compared to the control group. Even though we were not able to confirm statistically significant differences to justify the replacement of TiAlV regarding antioxidant enzymes, TiNbZrTa was able to induce faster bone formation at early time points, making it a good choice for biomedical and tissue bioengineering applications.

Surprising Lack of Influence on Water Droplet Motion by Hydrophilic Microdomains on Checkerboard-like Surfaces with Matched Contact Angle Hysteresis

Chemically and spatially micropatterned surfaces have been successfully prepared for a number of diverse applications, including water/fog harvesting, screen printing, microfluidics, and cell/protein assays. While there have been quite some reports on micropatterned surfaces, less is known about the factors that influence dynamic surface wettability. To that end, smooth checkerboard-like micropatterned hydrophobic/(super)hydrophilic surfaces (2, 5, 10, 20 μm pattern sizes) with regions of matching/mismatching contact angle hysteresis (CAH) were prepared on the basis of a simple chemisorption/photopatterning of monolayers. The effects of regional wettability/CAH and pattern size on the overall dynamic wettability were then examined by measuring the dynamic contact angles (CAs) and substrate tilt angles (θ_T) of water. It was found that the dynamic wettability on samples with matching regional CAH remained unchanged, even when using hydrophilic regions or changing the pattern size. In contrast, surfaces containing mismatching CAH regions pinned water droplets, leading to overall dynamic wetting properties markedly dependent on pattern size. In addition, the experimental data did not match values predicted by the Cassie equation because dynamic wetting behavior is dominated not by interfacial area but by the interactions of the liquid and solid at the three-phase contact line.

The Overview of Porous, Bioactive Scaffolds as Instructive Biomaterials for Tissue Regeneration and Their Clinical Translation

Porous scaffolds have been employed for decades in the biomedical field where researchers have been seeking to produce an environment which could approach one of the extracellular matrixes supporting cells in natural tissues. Such three-dimensional systems offer many degrees of freedom to modulate cell activity, ranging from the chemistry of the structure and the architectural properties such as the porosity, the pore, and interconnection size. All these features can be exploited synergistically to tailor the cell-material interactions, and further, the tissue growth within the voids of the scaffold. Herein, an overview of the materials employed to generate porous scaffolds as well as the various techniques that are used to process them is supplied. Furthermore, scaffold parameters which modulate cell behavior are identified under distinct aspects: the architecture of inert scaffolds (i.e., pore and interconnection size, porosity, mechanical properties, etc.) alone on cell functions followed by comparison with bioactive scaffolds to grasp the most relevant features driving tissue regeneration. Finally, in vivo outcomes are highlighted comparing the accordance between in vitro and in vivo results in order to tackle the future translational challenges in tissue repair and regeneration.

Research on alginate-polyacrylamide enhanced amnion hydrogel, a potential vascular substitute material

Although traditional synthetic vascular grafts have good mechanical stability, stenosis and even thrombus can be easily caused at the beginning of transplantation due to the material's procoagulant and low cell adhesion rate. In order to address these problems, by combining acellular amnion gel and polyacrylamide-alginate gel, we gained a composite hydrogel with high elasticity, mechanical stability, high bioactivity and low swelling ratio. The results showed that the composite gel had excellent mechanical strength, resistance to enzymatic degradation and anti-calcification ability. Also, it could significantly inhibit the adhesion, aggregation and activation of platelet and hemolysis. What is more, this composite hydrogel could significantly promote the adhesion and proliferation of ECs, as well as inducing the migration of ECs to the surface of the hydrogel. It could also stimulate the secretion of NO and PGI₂ from seeded HUVECs, which were important factors involved in vascular remodelling and repair. All the results indicated that prepared AlgSr/PAM-AM hydrogel was an excellent biomaterial with properties for potential use in vascular repair.

Patterned Molecular Films of Alkanethiol and PLL-PEG on Gold-Silicate Interfaces: How to Add Functionalities while Retaining Effective Antifouling

Spatial control of surface functionalization and interactions is essential for microarray-based analysis. This study reports the fabrication of two-dimensional molecular films with site-specific functionalities, forming microarrays at discrete locations. Arrays of microsized gold disks were produced on a silicate membrane using microfabrication. On these arrays, orthogonal self-assembly of molecules was performed that can specifically bind to gold or silicate. The gold array elements were functionalized with a range of alkanethiols and the silicate with polymeric poly-l-lysine-grafted-poly(ethylene glycol) (PLL-PEG). The surface functionalization on the gold disk array and the surrounding substrate was characterized at each step using X-ray photoelectron spectroscopy (XPS) to show that alkanethiols are specifically attached to the gold. PLL-PEG was used to provide resistance against nonspecific protein and cell adsorption and attached exclusively to the silicate. The effectiveness of the surface chemistry was validated by the selective self-assembly of a gold nanoparticle monolayer array on the gold regions. In a more sophisticated example, selective adhesion of MCF-7 cells to anti-EpCAM antibody modified gold areas of the gold-silicate surface was demonstrated to give a cell microarray. This study provides a general approach to fabricate chemical patterns on silicon-based devices with the convergence of microfabrication and material-specific surface modification, which may be useful to expand the functionalities and potential applications for patterned biomolecular films. Importantly, the ability to pattern surfaces with different surface chemistries is not limited to planar surfaces using this orthogonal surface-coupling approach.

Stretching of fibroblast cells on micropatterned gelatin on silicone elastomer

Micropatterned gelatin was formed on the silicone elastomer surface. The micropattern enabled cell alignment, regulation of the cell shape, and endowed the cells with resistance against mechanical stress.

Realization of Optical Network Structures for Robust Films through Immobilization of Europium Complexes

In this study, the bio-inspired self-cracking substrate can be employed as a template to control the formation of a robust mirco-patterning film. Uniform materials with variable diameters are achieved by optimizing the egg white/water ratios and reaction temperature. The incorporated europium ions exhibit its typical f-f transitions in patterned films. Moreover, the mechanical property and excellent transmittance features have been demonstrated. The current approach can be extended to design two-dimensional nanofabrication of different materials.

Micropatterned nanolayers immobilized with nerve growth factor for neurite formation of PC12 cells

BACKGROUND

Nerve regeneration is important for the treatment of degenerative diseases and neurons injured by accidents. Nerve growth factor (NGF) has been previously conjugated to materials for promotion of neurogenesis.

MATERIALS AND METHODS

Photoreactive gelatin was prepared by chemical coupling of gelatin with azidobenzoic acid (P-gel), and then NGF was immobilized on substrates in the presence or absence of micropatterned photomasks. UV irradiation induced crosslinking reactions of P-gel with itself, NGF, and the plate for immobilization.

RESULTS

By adjustment of the P-gel concentration, the nanometer-order height of micropatterns was controlled. NGF was quantitatively immobilized with increasing amounts of P-gel. Immobilized NGF induced neurite outgrowth of PC12 cells, a cell line derived from a pheochromocytoma of the rat adrenal medulla, at the same level as soluble NGF. The immobilized NGF showed higher thermal stability than the soluble NGF and was repeatedly used without loss of biological activity. The 3D structure (height of the formed micropattern) regulated the behavior of neurite guidance. As a result, the orientation of neurites was regulated by the stripe pattern width.

CONCLUSION

The micropattern-immobilized NGF nanolayer biochemically and topologically regulated neurite formation.

Evaluation of parylene derivatives for use as biomaterials for human astrocyte cell patterning

Cell patterning is becoming increasingly popular in neuroscience because it allows for the control in the location and connectivity of cells. A recently developed cell patterning technology uses patterns of an organic polymer, parylene-C, on a background of SiO₂. When cells are cultured on the parylene-C/SiO₂ substrate they conform to the underlying parylene-C geometry. Parylene-C is, however, just one member of a family of parylene polymers that have varying chemical and physical properties. In this work, we investigate whether two commercially available mainstream parylene derivatives, parylene-D, parylene-N and a more recent parylene derivative, parylene-HT to determine if they enable higher fidelity hNT astrocyte cell patterning compared to parylene-C. We demonstrate that all parylene derivatives are compatible with the existing laser fabrication method. We then demonstrate that parylene-HT, parylene-D and parylene-N are suitable for use as an hNT astrocyte cell attractive substrate and result in an equal quality of patterning compared to parylene-C. This work supports the use of alternative parylene derivatives for applications where their different physical and chemical properties are more suitable.

A spatially varying charge model for regulating site-selective protein adsorption and cell behaviors

Implanted materials that enter the body first interact with proteins in body fluids, and cells then perceive and respond to the foreign implant through this layer of adsorbed proteins. Thus, spatially specific regulation of protein adsorption on an implant surface is pivotal for mediating subsequent cellular behaviors. Unlike the surface modulation strategy for traditional biomaterials, in this research, materials with a nonuniform spatial distribution of surface charges were designed to achieve site-selective protein adsorption and further influence cell behavior by charge regulation. Spatially varying microdomains with different levels of piezoelectricity were generated via a focus laser beam-induced phase transition. In addition, after polarization, the zones with different levels of piezoelectricity showed significant differences in surface charge density. The results of scanning Kelvin probe force microscopy (SKPM) showed that the surface charge on the material exhibits a nonuniform spatial distribution after laser irradiation and polarization. Site-specific charge-mediated selective protein adsorption was demonstrated through a protein adsorption experiment. Cell behavior analysis showed that the increase in charge density was conducive to promoting cell adhesion and the formation of filopodia while the nonuniform spatial distribution of charge promoted an oriented arrangement of cells; both features accelerated cell migration. This study provides a new method for spatially regulating protein adsorption through surface charges to further influence cell behaviors.

2D Nanoclay for Biomedical Applications: Regenerative Medicine, Therapeutic Delivery, and Additive Manufacturing

Clay nanomaterials are an emerging class of 2D biomaterials of interest due to their atomically thin layered structure, charged characteristics, and well-defined composition. Synthetic nanoclays are plate-like polyions composed of simple or complex salts of silicic acids with a heterogeneous charge distribution and patchy interactions. Due to their biocompatible characteristics, unique shape, high surface-to-volume ratio, and charge, nanoclays are investigated for various biomedical applications. Here, a critical overview of the physical, chemical, and physiological interactions of nanoclay with biological moieties, including cells, proteins, and polymers, is provided. The state-of-the-art biomedical applications of 2D nanoclay in regenerative medicine, therapeutic delivery, and additive manufacturing are reviewed. In addition, recent developments that are shaping this emerging field are discussed and promising new research directions for 2D nanoclay-based biomaterials are identified.

Growth of Polystyrene Pillars in Electric Field

Surface patterning on polymer films, which is a self-assembly process under the action of external and/or internal impetus, has a variety of applications, including drug delivery and flexible electronics. In this work, we study the growth of polystyrene pillars in the electric field for different combinations of annealing temperature, film thickness, and electrode separation (electric field intensity). There are five stages for the growth of the polystyrene pillars for all the configurations used in this work, including a nucleation stage, a linear growth stage, an acceleration stage in the pillar length prior to the contact between the top surface of a pillar and the upper electrode, a radial growth stage after the contact, and a stationary stage without further growth of the pillar. In the linear growth stage, there exist linear relationships between the pillar length and the annealing time and between the square of the pillar diameter and the annealing time. The activation energies for the rate processes controlling the radial growth and the length growth in the linear growth stage are 30.2 and 25.3 kJ/mol, respectively. There are two rate processes controlling the radial growth of the pillars: one is the field-induced flow of polymer through the polymer film to the roots of pillars and the other is the coalescence of pillars. The activation energy for the coalescence is 16.5 kJ/mol. The results obtained in this work offer a practical route to control the geometrical dimensions of polymer pillars through the processing parameters.

MobilityAnalyser: A novel approach for automatic quantification of cell mobility on periodic patterned substrates using brightfield microscopy images

BACKGROUND AND OBJECTIVE

Surface topography of biomaterials has been shown to have an effect on cells behaviour. Cell-material interactions can be visually characterized by assessing both cell shape and spreading at initial time-points and, its migration patterns, as a response to the underlying topography. Whilst many have reported the study of cell migration and shape with fluorescence labelling, the focus on evaluating cells response to surface topography is to observe, under real-time conditions, interactions between cells and surfaces. In this manuscript we present a novel approach to automatically detect and remove periodic background patterns in brightfield microscopy images in order to perform automatic cell mobility analysis.

METHODS

The developed software, MobilityAnalyser, performs automatic tracking of unmarked cells and allows the user to manually correct any incorrectly detected or tracked cell. Human Mesenchymal Stem Cells (hMSCs) trajectory, migration distance, velocity and persistence were evaluated over line and pillar micropatterned SiO₂ films and on a flat SiO₂ control substrate.

RESULTS

The developed software proved to be effective in automatically removing background patterns of both line and pillar shapes and in performing cell detection and tracking. MobilityAnalyser accurately measured cell mobility in a fraction of the time required for manual analysis and eliminated user subjectivity. The results obtained with the software confirmed how different topographies affect cell trajectory, migration pathways and velocities, with a statistically significant increase for micropatterned surfaces, when compared with the flat control. The persistence parameter also proved the influence of both patterns on the directionality of cell movement.

CONCLUSIONS

MobilityAnalyser is an automatic tool that removes periodic background patterns, detects and tracks cells, and provides cell mobility parameters that characterize the response of cells to different surface topographies. The software is freely available at: https://drive.google.com/open?id=1Fbb321ogLD19SlRjceMETNUqDHgpeBPl.

Control of cell behaviour through nanovibrational stimulation: nanokicking

Mechanical signals are ubiquitous in our everyday life and the process of converting these mechanical signals into a biological signalling response is known as mechanotransduction. Our understanding of mechanotransduction, and its contribution to vital cellular responses, is a rapidly expanding field of research involving complex processes that are still not clearly understood. The use of mechanical vibration as a stimulus of mechanotransduction, including variation of frequency and amplitude, allows an alternative method to control specific cell behaviour without chemical stimulation (e.g. growth factors). Chemical-independent control of cell behaviour could be highly advantageous for fields including drug discovery and clinical tissue engineering. In this review, a novel technique is described based on nanoscale sinusoidal vibration. Using finite-element analysis in conjunction with laser interferometry, techniques that are used within the field of gravitational wave detection, optimization of apparatus design and calibration of vibration application have been performed. We further discuss the application of nanovibrational stimulation, or 'nanokicking', to eukaryotic and prokaryotic cells including the differentiation of mesenchymal stem cells towards an osteoblast cell lineage. Mechanotransductive mechanisms are discussed including mediation through the Rho-A kinase signalling pathway. Optimization of this technique was first performed in two-dimensional culture using a simple vibration platform with an optimal frequency and amplitude of 1 kHz and 22 nm. A novel bioreactor was developed to scale up cell production, with recent research demonstrating that mesenchymal stem cell differentiation can be efficiently triggered in soft gel constructs. This important step provides first evidence that clinically relevant (three-dimensional) volumes of osteoblasts can be produced for the purpose of bone grafting, without complex scaffolds and/or chemical induction. Initial findings have shown that nanovibrational stimulation can also reduce biofilm formation in a number of clinically relevant bacteria. This demonstrates additional utility of the bioreactor to investigate mechanotransduction in other fields of research.This article is part of a discussion meeting issue 'The promises of gravitational-wave astronomy'.

Fabrication of a Hydrophilic Line on a Hydrophobic Surface by Laser Ablation Processing

A hydrophilic line on a hydrophobic surface was fabricated by using plasma etching and laser ablation processing in this paper. We fabricated the nanospikes on a polyimide surface by using the plasma etching processing. CHF₃ plasma treatment for hydrophobic coating was conducted on these nanospikes. We fabricated the microgrooves on the hydrophobic nanospikes surface using laser ablation processing. The microgroove had hydrophilic characteristics. In order to measure the hydrophilic characteristics of the microgroove, a solution that was dispersed with silver nanoparticles was used. The hydrophilic line on the hydrophobic surface was dipped in the silver nanoparticle solution. The silver nanoparticles were attached on the hydrophilic microgroove and not on the hydrophobic surface. We concluded that the laser heat affected zone should be reduced for reducing the hydrophilic line width. This hydrophilic pattern on the hydrophobic surface can be used for cell growth, protein manipulation, the spotting of biomolecules, micro-fluidics and water collection. This functional surface can especially be used for an electric flexible circuit, which is newly proposed in this paper.

Superwettable Electrochemical Biosensor toward Detection of Cancer Biomarkers

Bioinspired superwettable micropatterns that combine two extreme states of superhydrophobicity and superhydrophilicity with the ability to enrich and absorb microdroplets are suitable for versatile and robust sensing applications. Here we introduce a superwettable microchip that integrates superhydrophobic-superhydrophilic micropatterns and a nanodendritic electrochemical biosensor toward the detection of prostate cancer biomarkers. On the superwettable microchip, the superhydrophobic area could confine the microdroplets in superhydrophilic microwells; such behavior is extremely helpful for reducing the amount of analytical solution. In contrast, superhydrophilic microwells exhibit a high adhesive force toward microdroplets, and the nanodendritic structures can improve probe-binding capacity and response signals, thus greatly enhancing the sensitivity. Sensitive and selective detection of prostate cancer biomarkers including miRNA-375, miRNA-141, and prostate-specific antigen on a single microchip is also achieved. Such a superwettable microchip with high sensitivity, low sample volume, and upside-down detection capability in a single microdroplet shows great potential to fabricate portable devices toward complex biosensing applications.

PPS-PEG Surface Coating to Reduce Thrombogenicity of Small Diameter ePTFE Vascular Grafts

Aims

Patency failure of small vascular synthetic grafts is still a major problem for coronary and peripheral revascularization. Thus, three new surface coatings of small synthetic grafts were tested in an acute pig model to evaluate their thrombogenicity (extracorporeal arterio-venous shunt) and in a chronic rat model to evaluate the tissue reaction they induced (subcutaneous implantation).

Methods

In five domestic pigs (25–30 kg) an extracorporeal femoro-femoral arterio-venous shunt model was used. The study protocol included first a non-heparinized perfusion sequence followed by graft perfusion after 10,000 UI iv heparin. Grafts were perfused for 3 and 9 minutes. The following coatings were tested on ePTFE grafts: poly-propylene sulphide (PPS) – poly-ethylene glycol (PEG) (wet and dry applications) as well as carbon. Two sets of control were used, one dry and one wet (vehicle only). After perfusion grafts were examined by scanning electron microscopy for semiquantitative assessment (score 0–3) of cellular and microthrombi deposition. To assess tissue compatibility, pieces of each material were implanted subcutaneously in 16 Wistar rats. At 2, 4, 8, 12 weeks four animals each were sacrificed for semi-quantitative (score 0–3) histologic evaluation of tissue reaction.

Results

In the pig model, cellular deposition and microthrombi formation increased over time. In non-heparinized animals, the coatings did not improve the surface characteristics, since they did not prevent microthrombi formation and cellular deposition. In heparinized animals, thrombogenicity was lowest in coated grafts, especially in PPS–PEG dry (P&0.05), and highest in controls. Cell deposition was lowest in PPS–PEG dry, but this difference was not statistically significant vs. controls. In the rat model, no significant differences of the tissue reaction could be shown between materials.

Conclusion

While all coatings failed to add any benefit for lowering tissue reaction, surface coating with PPS–PEG (dry application) reduced thrombogenicity significantly (in heparinized animals) and thus appears to be promising for improving graft patency of small synthetic vascular prostheses.

Improved Multiprotein Microcontact Printing on Plasma Immersion Ion Implanted Polystyrene

Multiprotein micropatterning allows the creation of complex, controlled microenvironments for single cells that can be used for the study of the localized effects of various proteins and signals on cell survival, development, and functions. To enable analysis of cell interactions with microprinted proteins, the multiprotein micropattern must have low cross-contamination and high long-term stability in a cell culture medium. To achieve this, we employed an optimized plasma ion immersion implantation (PIII) treatment to provide polystyrene (PS) with the ability to covalently immobilize proteins on contact while retaining sufficient transparency and suitable surface properties for contact printing and retention of protein activity. The quality and long-term stability of the micropatterns on untreated and PIII treated PS were compared with those on glass using confocal microscopy. The protein micropattern on the PIII treated PS was more uniform and had a significantly higher contrast that was not affected by long-term incubation in cell culture media because the proteins were covalently bonded to PIII treated PS. The immunostaining of mouse pancreatic β cells interacting with E-cadherin and fibronectin striped surfaces showed phosphorylated paxillin concentrated on cell edges over the fibronectin stripes. This indicates that multiprotein micropatterns printed on PIII treated PS can be used for high-resolution studies of local influence on cell morphology and protein production.

Upregulation of osteogenesis of mesenchymal stem cells with virus-based thin films

A major aim of tissue engineering is to develop biomimetic scaffolding materials that can guide the proliferation, self-renewal and differentiation of multipotent stem cells into specific lineages. Cellular functions can be controlled by the interactions between cells and biomaterials. Therefore, the surface chemistry and topography of support materials play a pivotal role in modulating cell behaviors at many stages of cell growth and development. Due to their highly ordered structure and programmable surface chemistries, which provide unique topography as biomaterials, viral nanoparticles have been utilized as building blocks for targeted cell growth and differentiation. This review article discusses the fabrication of two-dimensional virus-based thin film on substrates and highlights the study of the effect of chemical and physical cues introduced by plant virus nanoparticle thin films on the promotion of osteogenic differentiation of BMSCs.

Computational insights into charge transfer across functionalized semiconductor surfaces

Photoelectrochemical water-splitting is a promising carbon-free fuel production method for producing H₂ and O₂ gas from liquid water. These cells are typically composed of at least one semiconductor photoelectrode which is prone to degradation and/or oxidation. Various surface modifications are known for stabilizing semiconductor photoelectrodes, yet stabilization techniques are often accompanied by a decrease in photoelectrode performance. However, the impact of surface modification on charge transport and its consequence on performance is still lacking, creating a roadblock for further improvements. In this review, we discuss how density functional theory and finite-element device simulations are reliable tools for providing insight into charge transport across modified photoelectrodes.

Microtopographical cues promote peripheral nerve regeneration via transient mTORC2 activation

Despite microsurgical repair, recovery of function following peripheral nerve injury is slow and often incomplete. Outcomes could be improved by an increased understanding of the molecular biology of regeneration and by translation of experimental bioengineering strategies. Topographical cues have been shown to be powerful regulators of the rate and directionality of neurite regeneration, and in this study we investigated the downstream molecular effects of linear micropatterned structures in an organotypic explant model. Linear topographical cues enhanced neurite outgrowth and our results demonstrated that the mTOR pathway is important in regulating these responses.

mTOR gene expression peaked between 48 and 72 h, coincident with the onset of rapid neurite outgrowth and glial migration, and correlated with neurite length at 48 h. mTOR protein was located to glia and in a punctate distribution along neurites. mTOR levels peaked at 72 h and were significantly increased by patterned topography (p < 0.05). Furthermore, the topographical cues could override pharmacological inhibition. Downstream phosphorylation assays and inhibition of mTORC1 using rapamycin highlighted mTORC2 as an important mediator, and more specific therapeutic target. Quantitative immunohistochemistry confirmed the presence of the mTORC2 component rictor at the regenerating front where it co-localised with F-actin and vinculin. Collectively, these results provide a deeper understanding of the mechanism of action of topography on neural regeneration, and support the incorporation of topographical patterning in combination with pharmacological mTORC2 potentiation within biomaterial constructs used to repair peripheral nerves.

Statement of Significance

Peripheral nerve injury is common and functionally devastating. Despite microsurgical repair, healing is slow and incomplete, with lasting functional deficit. There is a clear need to translate bioengineering approaches and increase our knowledge of the molecular processes controlling nerve regeneration to improve the rate and success of healing. Topographical cues are powerful determinants of neurite outgrowth and represent a highly translatable engineering strategy. Here we demonstrate, for the first time, that microtopography potentiates neurite outgrowth via the mTOR pathway, with the mTORC2 subtype being of particular importance. These results give further evidence for the incorporation of microtopographical cues into peripheral nerve regeneration conduits and indicate that mTORC2 may be a suitable therapeutic target to potentiate nerve regeneration.

Topologically Controlled Cell Differentiation Based on Vapor-Deposited Polymer Coatings

In addition to the widely adopted method of controlling cell attachment for cell patterning, pattern formation via cell proliferation and differentiation is demonstrated using precisely defined interface chemistry and spatial topology. The interface platform is created using a maleimide-functionalized parylene coating (maleimide-PPX) that provides two routes for controlled conjugation accessibility, including the maleimide-thiol coupling reaction and the thiol-ene click reaction, with a high reaction specificity under mild conditions. The coating technology is a prime tool for the immobilization of sensitive molecules, such as growth factor proteins. Conjugation of fibroblast growth factor 2 (FGF-2) and bone morphogenetic protein (BMP-2) was performed on the coating surface by elegantly manipulating the reaction routes, and confining the conjugation reaction to selected areas was accomplished using microcontact printing (μCP) and/or UV irradiation photopatterning. The modified interface provides chemically and topologically defined signals that are recognized by cultured murine preosteoblast cells for proliferation (by FGF-2) and osteogenesis (by BMP-2) activities in specific locations. The reported technique additionally enabled synergistic pattern formation for both osteogenesis and proliferation activities on the same interface, which is difficult to perform using conventional cell attachment patterns. Because of the versatility of the coating, which can be applied to a wide range of materials and on curved and complex devices, the proposed technology is extendable to other prospective biomaterial designs and material interface modifications.

Multiphoton Fabrication of Fibronectin-Functionalized Protein Micropatterns: Stiffness-Induced Maturation of Cell-Matrix Adhesions in Human Mesenchymal Stem Cells

Cell-matrix adhesions are important structures governing the interactions between cells and their microenvironment at the cell-matrix interface. The focal complex (FC) and focal adhesion (FA) have been substantially investigated in conventional planar culture systems using fibroblasts as an in vitro model. However, the formation of more mature types of cell-matrix adhesion in human mesenchymal stem cells (hMSCs), including fibrillar adhesion (FBA) and 3D matrix adhesion (3DMA), have not been fully elucidated. Here we investigate the niche factor(s) that influence(s) the maturation of FBA and 3DMA by using multiphoton fabrication-based micropatterning. First, the bovine serum albumin (BSA)-made protein micropatterns were functionalized by incorporating various concentrations of fibronectin (FN) in fabrication solution. The amount of cross-linked FN is positively correlated with the initial concentration of FN in the reaction liquid, as verified by immunofluorescence staining. On the other hand, the anisotropic FN-functionalized micropatterns were fabricated by varying the length (i.e., in-plane stiffness) and height (i.e., bending stiffness) of micropatterns, respectively. Finally, hMSCs were cultured on these micropatterns for 2 h and 1 day to determine the formation of FBA and 3DMA, respectively, using immunofluorescence staining. Results demonstrated that FN-functionalized micropatterns with high anisotropy in x-y dimension benefit FBA maturation. Furthermore, niche factors such as higher bending and in-plane stiffness and the presence of abundant fibronectin have a positive effect on the maturation of FN-based cell-matrix adhesion. These findings could provide some new perspectives on designing platforms for further cell niche study and rationalizing scaffold design for tissue engineering.

Cell Microarray Technologies for High-Throughput Cell-Based Biosensors

Due to the recent demand for high-throughput cellular assays, a lot of efforts have been made on miniaturization of cell-based biosensors by preparing cell microarrays. Various microfabrication technologies have been used to generate cell microarrays, where cells of different phenotypes are immobilized either on a flat substrate (positional array) or on particles (solution or suspension array) to achieve multiplexed and high-throughput cell-based biosensing. After introducing the fabrication methods for preparation of the positional and suspension cell microarrays, this review discusses the applications of the cell microarray including toxicology, drug discovery and detection of toxic agents.

Sub-Micrometer Surface-Patterned Ribbon Fibers and Textiles

The worldwide annual production volume of textiles is nearly one hundred million metric tons. Most of these undergo treatments to achieve specific properties, such as color, hydrophobicity, antimicrobial, or UV protection, using chemicals that lead to collateral environmental consequences. There is great interest in developing alternative and sustainable strategies to achieve textile functionality that do not involve chemical treatment. Here we present a thermal drawing approach to achieve fiber surface gratings on a rectangular cross-section. We demonstrate directional wetting properties as well as structural coloration based on the gratings. Periods down to ≈ 600 nm were established on the surface of a fiber. Fabrics displaying higher-order diffraction peaks in the visible regime were produced from surface-patterned fibers using convetional weaving machinery.