The mechanism of cellulase action on cotton fibers: evidence from atomic force microscopy

Heterologous Expression of Thermostable Endoglucanases from Rasamsonia emersonii: A Paradigm Shift in Biomass Hydrolysis

In this study, two thermostable endoglucanases (Rem_GH5EG and Rem_GH7EG) from Rasamsonia emersonii were heterologously expressed in Pichia pastoris and characterized to evaluate their potential for industrial biomass saccharification. Rem_GH5EG demonstrated markedly superior catalytic efficiency toward barley β-glucan (kcat/Km = 6.3 × 10-3/mg mL/min), while Rem_GH7EG exhibited a preference for carboxymethyl cellulose (kcat/Km = 1.17 × 10-3/mg mL/min). Notably, Rem_GH5EG showed optimal activity at 90 °C with a half-life (t1/2) of 2 h, whereas Rem_GH7EG was active at 70 °C with a half-life (t1/2) of 1 h, highlighting its suitability for high-temperature hydrolysis processes. Moreover, pre-conditioning of steam and acid pretreated unwashed rice straw slurry with Rem_GH5EG at 90 °C effectively reduced viscosity-related mass transfer limitations, thereby enhancing the hydrolytic efficiency of benchmark cellulase. These findings underscore the industrial relevance of Rem_GH5EG as the more promising candidate for developing efficient enzyme cocktails for biomass saccharification.

Enzyme kinetics by GH7 cellobiohydrolases on chromogenic substrates is dictated by non-productive binding: insights from crystal structures and MD simulation

Cellobiohydrolases (CBHs) in the glycoside hydrolase family 7 (GH7) (EC3.2.1.176) are the major cellulose degrading enzymes both in industrial settings and in the context of carbon cycling in nature. Small carbohydrate conjugates such as p-nitrophenyl-β-d-cellobioside (pNPC), p-nitrophenyl-β-d-lactoside (pNPL) and methylumbelliferyl-β-d-cellobioside have commonly been used in colorimetric and fluorometric assays for analysing activity of these enzymes. Despite the similar nature of these compounds the kinetics of their enzymatic hydrolysis vary greatly between the different compounds as well as among different enzymes within the GH7 family. Through enzyme kinetics, crystallographic structure determination, molecular dynamics simulations, and fluorometric binding studies using the closely related compound o-nitrophenyl-β-d-cellobioside (oNPC), in this work we examine the different hydrolysis characteristics of these compounds on two model enzymes of this class, TrCel7A from Trichoderma reesei and PcCel7D from Phanerochaete chrysosporium. Protein crystal structures of the E212Q mutant of TrCel7A with pNPC and pNPL, and the wildtype TrCel7A with oNPC, reveal that non-productive binding at the product site is the dominating binding mode for these compounds. Enzyme kinetics results suggest the strength of non-productive binding is a key determinant for the activity characteristics on these substrates, with PcCel7D consistently showing higher turnover rates (k_cat ) than TrCel7A, but higher Michaelis-Menten (K_M ) constants as well. Furthermore, oNPC turned out to be useful as an active-site probe for fluorometric determination of the dissociation constant for cellobiose on TrCel7A but could not be utilized for the same purpose on PcCel7D, likely due to strong binding to an unknown site outside the active site.

An insight into microscopy and analytical techniques for morphological, structural, chemical, and thermal characterization of cellulose

Cellulose obtained from plants is a bio-polysaccharide and the most abundant organic polymer on earth that has immense household and industrial applications. Hence, the characterization of cellulose is important for determining its appropriate applications. In this article, we review the characterization of cellulose morphology, surface topography using microscopic techniques including optical microscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. Other physicochemical characteristics like crystallinity, chemical composition, and thermal properties are studied using techniques including X-ray diffraction, Fourier transform infrared, Raman spectroscopy, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. This review may contribute to the development of using cellulose as a low-cost raw material with anticipated physicochemical properties. HIGHLIGHTS: Morphology and surface topography of cellulose structure is characterized using microscopy techniques including optical microscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. Analytical techniques used for physicochemical characterization of cellulose include X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, nuclear magnetic resonance spectroscopy, differential scanning calorimetry, and thermogravimetric analysis.

Glycosyl hydrolases family 5, subfamily 5: Relevance and structural insights for designing improved biomass degrading cocktails

Endoglucanases are carbohydrate-degrading enzymes widely used for bioethanol production as part of the enzymatic cocktail. However, family 5 subfamily 5 (GH5_5) endoglucanases are still poorly explored in depth. The Trichoderma reesei representative is the most studied enzyme, presenting catalytic activity in acidic media and mild temperature conditions. Though biochemically similar, its modular structure and synergy with other components vary greatly compared to other GH5_5 members and there is still a lack of specific studies regarding their interaction with other cellulases and application on novel and better mixtures. In this regard, the threedimensional structure elucidation is a highly valuable tool to both uncover basic catalytic mechanisms and implement engineering techniques, proved by the high success rate GH5_5 endoglucanases show. GH5_5 enzymes must be carefully evaluated to fully uncover their potential in biomass-degrading cocktails: the optimal industrial conditions, synergy with other cellulases, structural studies, and enzyme engineering approaches. We aimed to provide the current understanding of these main topics, collecting all available information about characterized GH5_5 endoglucanases function, structure, and bench experiments, in order to suggest future directions to a better application of these enzymes in the industry.

Enzyme-Mediated Lignocellulose Liquefaction Is Highly Substrate-Specific and Influenced by the Substrate Concentration or Rheological Regime

The high viscosities/yield stresses of lignocellulose slurries makes their industrial processing a significant challenge. However, little is known regarding the degree to which liquefaction and its enzymatic requirements are specific to a substrate's physicochemical and rheological properties. In the work reported here, the substrate- and rheological regime-specificities of liquefaction of various substrates were assessed using real-time in-rheometer viscometry and offline oscillatory rheometry when hydrolyzed by combinations of cellobiohydrolase (Trichoderma reesei Cel7A), endoglucanase (Humicola insolens Cel45A), glycoside hydrolase (GH) family 10 xylanase, and GH family 11 xylanase. In contrast to previous work that has suggested that endoglucanase activity dominates enzymatic liquefaction, all of the enzymes were shown to have at least some liquefaction capacity depending on the substrate and reaction conditions. The contribution of individual enzymes was found to be influenced by the rheological regime; in the concentrated regime, the cellobiohydrolase outperformed the endoglucanase, achieving 2.4-fold higher yield stress reduction over the same timeframe, whereas the endoglucanase performed best in the semi-dilute regime. It was apparent that the significant differences in rheology and liquefaction mechanisms made it difficult to predict the liquefaction capacity of an enzyme or enzyme cocktail at different substrate concentrations.

Probing of Nanoscale Friction and Mechanical Characteristics of Cotton Fiber’s Surface

The surface topography and nanomechanical attributes of two samples of cotton fibers, namely, A and B, were characterized with various operation modes of an Atomic Force Microscope (AFM). The surface topography and friction images of the fibers were obtained in contact mode. The nanomechanical properties images—i.e., adhesion and deformation—were obtained in force tapping mode. The results indicate that the surface nanomechanical and nanoscale frictional properties of the fibers vary significantly between two samples. The plots of friction versus normal force of the fibers’ surface from both samples are fitted to the equation of single-asperity, adhesion-controlled friction. Nevertheless, within the range of the applied normal force, the friction curves of sample A surfaces show a characteristic transition phase. That is, under low normal forces, the friction curves closely conform with the Hertzian component of friction; after the transition takes place at higher normal forces, the friction curves follow Amontons’ law of friction. We demonstrated that the transition phase corresponds to a state at which the cuticle layer molecules are displaced from the fibers’ surface. The average adhesion force of the samples is consistent with the average friction signal strength collected under low normal forces.

Multiscale Frictional Properties of Cotton Fibers: A Review

This review discusses the important concept of cotton fiber friction at both the macro- and nanoscale. First, the technological importance of fiber friction and its role in fiber breakage during fiber processing is discussed. Next, previous studies on frictional properties of cotton fibers are reviewed and different experimental procedures to measure friction between fibers or against another surface are evaluated. Friction models developed to explain friction process during various experimental procedures are considered and their limitations are discussed. Since interpretation of friction processes at the macroscale can be challenging (mainly due to difficulties in analyzing the multiple asperities in contact), a separate section is devoted to surveying studies on the emerging field of single-asperity friction experiments with atomic force microscope (AFM). Special attention is given to studies on nanoscale frictional characteristics of rough viscoelastic surfaces (e.g., plant cuticular biopolymers and cotton fibers). Due to the close relationship between friction and adhesion hysteresis at the nanoscale, adhesion studies with AFM on viscoelastic surfaces are also reviewed. Lastly, recommendations are made for future research in the field of frictional properties of cotton fibers.

Mechanistic insights into the liquefaction stage of enzyme-mediated biomass deconstruction

Effective enzyme-mediated viscosity reduction, disaggregation, or "liquefaction," is required to overcome the rheological challenges resulting from the fibrous, hygroscopic nature of lignocellulosic biomass, particularly at the high solids loadings that will be required for an economically viable process. However, the actual mechanisms involved in enzyme-mediated liquefaction, as determined by viscosity or yield stress reduction, have yet to be fully resolved. Particle fragmentation, interparticle interaction, material dilution, and water-retention capacity were compared for their ability to quantify enzyme-mediated liquefaction of model and more realistic pretreated biomass substrates. It was apparent that material dilution and particle fragmentation occurred simultaneously and that both mechanisms contributed to viscosity/yield stress reduction. However, their relative importance was dependent on the nature of the biomass substrate. Interparticle interaction and enzyme-mediated changes to these interactions was shown to have a significant effect on slurry rheology. Liquefaction was shown to result from the combined action of material dilution, particle fragmentation, and alteration of interactions at particle surfaces. However, the observed changes in water retention capacity did not correlate with yield stress reduction. The relative importance of each mechanism was significantly influenced by the nature of the biomass substrate and its physicochemical properties. An ongoing challenge is that mechanisms, such as refining, which enhance enzyme accessibility to the cellulosic component of the substrate, are detrimental to slurry rheology and will likely impede enzyme-mediated liquefaction when high substrate concentrations are used.

Study on the Interaction Between Cellulase and Surfactants

The conformations of secondary and tertiary structures of cellulase in the presence of eleven commonly used surfactants were determined by Raman spectroscopy and the results were discussed. The results indicated that anionic surfactants had a stronger influence on the cellulase conformations than nonionic surfactants. Thus anionic surfactants showed a stronger inactivation on the cellulase activity. Furthermore, Zeta potential distributions of cellulase in solutions of surfactants were tested by Dynamic Light Scattering (DLS). The DLS results indicated that the interaction between anionic surfactants and cellulase was attributed to electrostatic attraction. By adding cellulase to a liquid, non-cellulase-containing detergent, the detergency of the liquid detergent could be increased. Further studies on the sample swatches by optical microscopy and scanning electron microscopy (SEM) were undertaken in this paper.

RNA-Seq Analysis of the Expression of Genes Encoding Cell Wall Degrading Enzymes during Infection of Lupin (Lupinus angustifolius) by Phytophthora parasitica

RNA-Seq analysis has shown that over 60% (12,962) of the predicted transcripts in the Phytophthora parasitica genome are expressed during the first 60 h of lupin root infection. The infection transcriptomes included 278 of the 431 genes encoding P. parasitica cell wall degrading enzymes. The transcriptome data provide strong evidence of global transcriptional cascades of genes whose encoded proteins target the main categories of plant cell wall components. A major cohort of pectinases is predominantly expressed early but as infection progresses, the transcriptome becomes increasingly dominated by transcripts encoding cellulases, hemicellulases, β-1,3-glucanases and glycoproteins. The most highly expressed P. parasitica carbohydrate active enzyme gene contains two CBM1 cellulose binding modules and no catalytic domains. The top 200 differentially expressed genes include β-1,4-glucosidases, β-1,4-glucanases, β-1,4-galactanases, a β-1,3-glucanase, an α-1,4-polygalacturonase, a pectin deacetylase and a pectin methylesterase. Detailed analysis of gene expression profiles provides clues as to the order in which linkages within the complex carbohydrates may come under attack. The gene expression profiles suggest that (i) demethylation of pectic homogalacturonan occurs before its deacetylation; (ii) cleavage of the backbone of pectic rhamnogalacturonan I precedes digestion of its side chains; (iii) early attack on cellulose microfibrils by non-catalytic cellulose-binding proteins and enzymes with auxiliary activities may facilitate subsequent attack by glycosyl hydrolases and enzymes containing CBM1 cellulose-binding modules; (iv) terminal hemicellulose backbone residues are targeted after extensive internal backbone cleavage has occurred; and (v) the carbohydrate chains on glycoproteins are degraded late in infection. A notable feature of the P. parasitica infection transcriptome is the high level of transcription of genes encoding enzymes that degrade β-1,3-glucanases during middle and late stages of infection. The results suggest that high levels of β-1,3-glucanases may effectively degrade callose as it is produced by the plant during the defence response.

Temperature and solids retention time control microbial population dynamics and volatile fatty acid production in replicated anaerobic digesters

Anaerobic digestion is a widely used technology for waste stabilization and generation of biogas, and has recently emerged as a potentially important process for the production of high value volatile fatty acids (VFAs) and alcohols. Here, three reactors were seeded with inoculum from a stably performing methanogenic digester, and selective operating conditions (37°C and 55°C; 12 day and 4 day solids retention time) were applied to restrict methanogenesis while maintaining hydrolysis and fermentation. Replicated experiments performed at each set of operating conditions led to reproducible VFA production profiles which could be correlated with specific changes in microbial community composition. The mesophilic reactor at short solids retention time showed accumulation of propionate and acetate (42 ± 2% and 15 ± 6% of CODhydrolyzed, respectively), and dominance of Fibrobacter and Bacteroidales. Acetate accumulation (>50% of CODhydrolyzed) was also observed in the thermophilic reactors, which were dominated by Clostridium. Under all tested conditions, there was a shift from acetoclastic to hydrogenotrophic methanogenesis, and a reduction in methane production by >50% of CODhydrolyzed. Our results demonstrate that shortening the SRT and increasing the temperature are effective strategies for driving microbial communities towards controlled production of high levels of specific volatile fatty acids.

The use of carbohydrate binding modules (CBMs) to monitor changes in fragmentation and cellulose fiber surface morphology during cellulase- and Swollenin-induced deconstruction of lignocellulosic substrates

Although the actions of many of the hydrolytic enzymes involved in cellulose hydrolysis are relatively well understood, the contributions that amorphogenesis-inducing proteins might contribute to cellulose deconstruction are still relatively undefined. Earlier work has shown that disruptive proteins, such as the non-hydrolytic non-oxidative protein Swollenin, can open up and disaggregate the less-ordered regions of lignocellulosic substrates. Within the cellulosic fraction, relatively disordered, amorphous regions known as dislocations are known to occur along the length of the fibers. It was postulated that Swollenin might act synergistically with hydrolytic enzymes to initiate biomass deconstruction within these dislocation regions. Carbohydrate binding modules (CBMs) that preferentially bind to cellulosic substructures were fluorescently labeled. They were imaged, using confocal microscopy, to assess the distribution of crystalline and amorphous cellulose at the fiber surface, as well as to track changes in surface morphology over the course of enzymatic hydrolysis and fiber fragmentation. Swollenin was shown to promote targeted disruption of the cellulosic structure at fiber dislocations.

Carbohydrate-binding modules of fungal cellulases: occurrence in nature, function, and relevance in industrial biomass conversion

In this review, the present knowledge on the occurrence of cellulases, with a special emphasis on the presence of carbohydrate-binding modules (CBMs) in various fungal strains, has been summarized. The importance of efficient fungal cellulases is growing due to their potential uses in biorefinery processes where lignocellulosic biomasses are converted to platform sugars and further to biofuels and chemicals. Most secreted cellulases studied in detail have a bimodular structure containing an active core domain attached to a CBM. CBMs are traditionally been considered as essential parts in cellulases, especially in cellobiohydrolases. However, presently available genome data indicate that many cellulases lack the binding domains in cellulose-degrading organisms. Recent data also demonstrate that CBMs are not necessary for the action of cellulases and they solely increase the concentration of enzymes on the substrate surfaces. On the other hand, in practical industrial processes where high substrate concentrations with low amounts of water are employed, the enzymes have been shown to act equally efficiently with and without CBM. Furthermore, available kinetic data show that enzymes without CBMs can desorb more readily from the often lignaceous substrates, that is, they are not stuck on the substrates and are thus available for new actions. In this review, the available data on the natural habitats of different wood-degrading organisms (with emphasis on the amount of water present during wood degradation) and occurrence of cellulose-binding domains in their genome have been assessed in order to identify evolutionary advantages for the development of CBM-less cellulases in nature.

Addition of a carbohydrate-binding module enhances cellulase penetration into cellulose substrates

INTRODUCTION

Cellulases are of great interest for application in biomass degradation, yet the molecular details of the mode of action of glycoside hydrolases during degradation of insoluble cellulose remain elusive. To further improve these enzymes for application at industrial conditions, it is critical to gain a better understanding of not only the details of the degradation process, but also the function of accessory modules.

METHOD

We fused a carbohydrate-binding module (CBM) from family 2a to two thermophilic endoglucanases. We then applied neutron reflectometry to determine the mechanism of the resulting enhancements.

RESULTS

Catalytic activity of the chimeric enzymes was enhanced up to three fold on insoluble cellulose substrates as compared to wild type. Importantly, we demonstrate that the wild type enzymes affect primarily the surface properties of an amorphous cellulose film, while the chimeras containing a CBM alter the bulk properties of the amorphous film.

CONCLUSION

Our findings suggest that the CBM improves the efficiency of these cellulases by enabling digestion within the bulk of the film.

Dissecting and reconstructing synergism: in situ visualization of cooperativity among cellulases

Cellulose is the most abundant biopolymer and a major reservoir of fixed carbon on earth. Comprehension of the elusive mechanism of its enzymatic degradation represents a fundamental problem at the interface of biology, biotechnology, and materials science. The interdependence of cellulose disintegration and hydrolysis and the synergistic interplay among cellulases is yet poorly understood. Here we report evidence from in situ atomic force microscopy (AFM) that delineates degradation of a polymorphic cellulose substrate as a dynamic cycle of alternating exposure and removal of crystalline fibers. Direct observation shows that chain-end-cleaving cellobiohydrolases (CBH I, CBH II) and an internally chain-cleaving endoglucanase (EG), the major components of cellulase systems, take on distinct roles: EG and CBH II make the cellulose surface accessible for CBH I by removing amorphous-unordered substrate areas, thus exposing otherwise embedded crystalline-ordered nanofibrils of the cellulose. Subsequently, these fibrils are degraded efficiently by CBH I, thereby uncovering new amorphous areas. Without prior action of EG and CBH II, CBH I was poorly active on the cellulosic substrate. This leads to the conclusion that synergism among cellulases is morphology-dependent and governed by the cooperativity between enzymes degrading amorphous regions and those targeting primarily crystalline regions. The surface-disrupting activity of cellulases therefore strongly depends on mesoscopic structural features of the substrate: size and packing of crystalline fibers are key determinants of the overall efficiency of cellulose degradation.

The pattern of cell wall deterioration in lignocellulose fibers throughout enzymatic cellulose hydrolysis

Cell wall deterioration throughout enzymatic hydrolysis of cellulosic biomass is greatly affected by the chemical composition and the ultrastructure of the fiber cell wall. The resulting pattern of cell wall deterioration will reveal information on cellulose activity throughout enzymatic hydrolysis. This study investigates the progression and morphological changes in lignocellulose fibers throughout enzymatic hydrolysis, using (transmission electron microscopy) TEM and field emission scanning electron microscopy (FE-SEM). Softwood thermo-mechanical pulp (STMP) and softwood bleached kraft pulp (SBKP), lignocellulose substrates containing almost all the original fiber composition, and with lignin and some hemicellulose removed, respectively, was compared for morphology changes throughout hydrolysis. The difference of conversion between STMP and SBKP after 48 h of enzymatic hydrolysis is 11 and 88%, respectively. TEM images revealed an even fiber cell wall cross section density, with uneven middle lamella coverage in STMP fibers. SKBP fibers exhibited some spaces between cell wall and lamella layers due to the removal of lignin and some hemicellulose. After 1 h hydrolysis in SBKP fibers, there were more changes in the fiber cross-sectional area than after 10 h hydrolysis in STMP fibers. Cell wall degradation was uneven, and originated in accessible cellulose throughout the fiber cell wall. FE-SEM images illustrated more morphology changes in SBKP fibers than STMP fibers. Enzymatic action of STMP fiber resulted in a smoother fiber surface, along with fiber peeling and the formation of ribbon-disjunction layers. SBKP fibers exhibited structural changes such as fiber erosion, fiber cutting, and fiber splitting throughout enzymatic hydrolysis.

Real-time observation of the swelling and hydrolysis of a single crystalline cellulose fiber catalyzed by cellulase 7B from Trichoderma reesei

The biodegradation of cellulose involves the enzymatic action of cellulases (endoglucanases), cellobiohydrolases (exoglucanases), and β-glucosidases that act synergistically. The rate and efficiency of enzymatic hydrolysis of crystalline cellulose in vitro decline markedly with time, limiting the large-scale, cost-effective production of cellulosic biofuels. Several factors have been suggested to contribute to this phenomenon, but there is considerable disagreement regarding the relative importance of each. These earlier investigations were hampered by the inability to observe the disruption of crystalline cellulose and its subsequent hydrolysis directly. Here, we show the application of high-resolution atomic force microscopy to observe the swelling of a single crystalline cellulose fiber and its-hydrolysis in real time directly as catalyzed by a single cellulase, the industrially important cellulase 7B from Trichoderma reesei. Volume changes, the root-mean-square roughness, and rates of hydrolysis of the surfaces of single fibers were determined directly from the images acquired over time. Hydrolysis dominated the early stage of the experiment, and swelling dominated the later stage. The high-resolution images revealed that the combined action of initial hydrolysis followed by swelling exposed individual microfibrils and bundles of microfibrils, resulting in the loosening of the fiber structure and the exposure of microfibrils at the fiber surface. Both the hydrolysis and swelling were catalyzed by the native cellulase; under the same conditions, its isolated carbohydrate-binding module did not cause changes to crystalline cellulose. We anticipate that the application of our AFM-based analysis on other cellulolytic enzymes, alone and in combination, will provide significant insight into the process of cellulose biodegradation and greatly facilitate its application for the efficient and economical production of cellulosic ethanol.

N-glycoform diversity of cellobiohydrolase I from Penicillium decumbens and synergism of nonhydrolytic glycoform in cellulose degradation

Four cellobiohydrolase I (CBHI) glycoforms, namely, CBHI-A, CBHI-B, CBHI-C, and CBHI-D, were purified from the cultured broth of Penicillium decumbens JU-A10. All glycoforms had the same amino acid sequence but displayed different characteristics and biological functions. The effects of the N-glycans of the glycoforms on CBH activity were analyzed using mass spectrum data. Longer N-glycan chains at the Asn-137 of CBHI increased CBH activity. After the N-glycans were removed using site-directed mutagenesis and homologous expression in P. decumbens, the specific CBH activity of the recombinant CBHI without N-glycosylation increased by 65% compared with the wild-type CBHI with the highest specific activity. However, the activity was not stable. Only the N-glycosylation at Asn-137 can improve CBH activity by 40%. rCBHI with N-glycosylation only at Asn-470 exhibited no enzymatic activity. CBH activity was affected whether or not the protein was glycosylated, together with the N-glycosylation site and N-glycan structure. N-Glycosylation not only affects CBH activity but may also bring a new feature to a nonhydrolytic CBHI glycoform (CBHI-A). By supplementing CBHI-A to different commercial cellulase preparations, the glucose yield of lignocellulose hydrolysis increased by >20%. After treatment with a low dose (5 mg/g substrate) of CBHI-A at 50 °C for 7 days, the hydrogen-bond intensity and crystalline degree of cotton fibers decreased by 17 and 34%, respectively. These results may provide new guidelines for cellulase engineering.

Cellulases dig deep: in situ observation of the mesoscopic structural dynamics of enzymatic cellulose degradation

Enzymatic hydrolysis of cellulose is key for the production of second generation biofuels, which represent a long-standing leading area in the field of sustainable energy. Despite the wealth of knowledge about cellulase structure and function, the elusive mechanism by which these enzymes disintegrate the complex structure of their insoluble substrate, which is the gist of cellulose saccharification, is still unclear. We herein present a time-resolved structural characterization of the action of cellulases on a nano-flat cellulose preparation, which enabled us to overcome previous limitations, using atomic force microscopy (AFM). As a first step in substrate disintegration, elongated fissures emerge which develop into coniform cracks as disintegration continues. Detailed data analysis allowed tracing the surface evolution back to the dynamics of crack morphology. This, in turn, reflects the interplay between surface degradation inside and outside of the crack. We observed how small cracks evolved and initially increased in size. At a certain point, the crack diameter stagnated and then started decreasing again. Stagnation corresponds with a decrease in the total amount of surface which is fissured and thus leads to the conclusion that the surface hydrolysis “around” the cracks is proceeding more rapidly than inside the cracks. The mesoscopic view presented here is in good agreement with various mechanistic proposals from the past and allows a novel insight into the structural dynamics occurring on the cellulosic substrate through cellulase action.

Small angle neutron scattering reveals pH-dependent conformational changes in Trichoderma reesei cellobiohydrolase I: implications for enzymatic activity

Cellobiohydrolase I (Cel7A) of the fungus Trichoderma reesei (now classified as an anamorph of Hypocrea jecorina) hydrolyzes crystalline cellulose to soluble sugars, making it of key interest for producing fermentable sugars from biomass for biofuel production. The activity of the enzyme is pH-dependent, with its highest activity occurring at pH 4-5. To probe the response of the solution structure of Cel7A to changes in pH, we measured small angle neutron scattering of it in a series of solutions having pH values of 7.0, 6.0, 5.3, and 4.2. As the pH decreases from 7.0 to 5.3, the enzyme structure remains well defined, possessing a spatial differentiation between the cellulose binding domain and the catalytic core that only changes subtly. At pH 4.2, the solution conformation of the enzyme changes to a structure that is intermediate between a properly folded enzyme and a denatured, unfolded state, yet the secondary structure of the enzyme is essentially unaltered. The results indicate that at the pH of optimal activity, the catalytic core of the enzyme adopts a structure in which the compact packing typical of a fully folded polypeptide chain is disrupted and suggest that the increased range of structures afforded by this disordered state plays an important role in the increased activity of Cel7A through conformational selection.

Pretreatment and enzymatic hydrolysis of wheat straw (Triticum aestivum L.)--the impact of lignin relocation and plant tissues on enzymatic accessibility

Wheat straw is a potential feedstock for bioethanol production. This paper investigates tissues from whole internode sections subjected to hydrothermal pretreatment at 185°C and subsequent enzymatic hydrolysis up to 144 h. Analyses revealed an increase in surface lignin as hydrolysis progressed, which could be coupled to the gradual decrease in hydrolysis rate over time. The data support the hypothesis of lignin extraction from the cell wall matrix during pretreatment and deposition as droplets upon cooling. These droplets are assumed to accumulate during enzymatic hydrolysis. Additionally, after 144 h of enzymatic hydrolysis the cortex had vanished, exposing the heavier lignified vascular tissue. Accumulation of lignin droplets and exposure of residual lignin could be part of the explanation for the decreasing hydrolysis rate. Flattening of macrofibrils after pretreatment together with more indentations on the surfaces was also observed, possibly caused by a proposed synergistic effect of cellobiohydrolases and endoglucanases.

Cellobiohydrolase hydrolyzes crystalline cellulose on hydrophobic faces

Biodegradation of plant biomass is a slow process in nature, and hydrolysis of cellulose is also widely considered to be a rate-limiting step in the proposed industrial process of converting lignocellulosic materials to biofuels. It is generally known that a team of enzymes including endo- and exocellulases as well as cellobiases are required to act synergistically to hydrolyze cellulose to glucose. The detailed molecular mechanisms of these enzymes have yet to be convincingly elucidated. In this report, atomic force microscopy (AFM) is used to image in real-time the structural changes in Valonia cellulose crystals acted upon by the exocellulase cellobiohydrolase I (CBH I) from Trichoderma reesei. Under AFM, single enzyme molecules could be observed binding only to one face of the cellulose crystal, apparently the hydrophobic face. The surface roughness of cellulose began increasing after adding CBH I, and the overall size of cellulose crystals decreased during an 11-h period. Interestingly, this size reduction apparently occurred only in the width of the crystal, whereas the height remained relatively constant. In addition, the measured cross-section shape of cellulose crystal changed from asymmetric to nearly symmetric. These observed changes brought about by CBH I action may constitute the first direct visualization supporting the idea that the exocellulase selectively hydrolyzes the hydrophobic faces of cellulose. The limited accessibility of the hydrophobic faces in native cellulose may contribute significantly to the rate-limiting slowness of cellulose hydrolysis.

Access to cellulose limits the efficiency of enzymatic hydrolysis: the role of amorphogenesis

The efficient enzymatic saccharification of cellulose at low cellulase (protein) loadings continues to be a challenge for commercialization of a process for bioconversion of lignocellulose to ethanol. Currently, effective pretreatment followed by high enzyme loading is needed to overcome several substrate and enzyme factors that limit rapid and complete hydrolysis of the cellulosic fraction of biomass substrates. One of the major barriers faced by cellulase enzymes is their limited access to much of the cellulose that is buried within the highly ordered and tightly packed fibrillar architecture of the cellulose microfibrils. Rather than a sequential 'shaving' or 'planing' of the cellulose fibrils from the outside, it has been suggested that these inaccessible regions are disrupted or loosened by non-hydrolytic proteins, thereby increasing the cellulose surface area and making it more accessible to the cellulase enzyme complex. This initial stage in enzymatic saccharification of cellulose has been termed amorphogenesis. In this review, we describe the various amorphogenesis-inducing agents that have been suggested, and their possible role in enhancing the enzymatic hydrolysis of cellulose.

High speed atomic force microscopy visualizes processive movement of Trichoderma reesei cellobiohydrolase I on crystalline cellulose

Fungal cellobiohydrolases act at liquid-solid interfaces. They have the ability to hydrolyze cellulose chains of a crystalline substrate because of their two-domain structure, i.e. cellulose-binding domain and catalytic domain, and unique active site architecture. However, the details of the action of the two domains on crystalline cellulose are still unclear. Here, we present real time observations of Trichoderma reesei (Tr) cellobiohydrolase I (Cel7A) molecules sliding on crystalline cellulose, obtained with a high speed atomic force microscope. The average velocity of the sliding movement on crystalline cellulose was 3.5 nm/s, and interestingly, the catalytic domain without the cellulose-binding domain moved with a velocity similar to that of the intact TrCel7A enzyme. However, no sliding of a catalytically inactive enzyme (mutant E212Q) or a variant lacking tryptophan at the entrance of the active site tunnel (mutant W40A) could be detected. This indicates that, besides the hydrolysis of glycosidic bonds, the loading of a cellulose chain into the active site tunnel is also essential for the enzyme movement.

Interaction force of chitin-binding domains onto chitin surface

Interaction force of chitin-binding domains (ChBD1 and ChBD2) from a thermostable chitinase onto chitin surface was directly measured by atomic force microscopy (AFM) in a buffer solution. In the force curve measurement, multiple pull-off events were observed for the AFM tips functionalized with either ChBD1 or ChBD2, whereas the AFM tips terminated with nitrilotriacetic acid groups without ChBD showed no interaction peak, suggesting that the detected forces are derived from the binding functions of ChBDs onto the chitin surface. The force curve analyses indicate that the binding force of ChBD2 is stronger than that of ChBD1. This result suggests that ChBD1 and ChBD2 play different roles in adsorption onto chitin surface.

A novel function for the cellulose binding module of cellobiohydrolase I

A homogeneous cellulose-binding module (CBM) of cellobiohydrolase I (CBHI) from Trichoderma pseudokoningii S-38 was obtained by the limited proteolysis with papain and a series of chromatographs filtration. Analysis of FT-IR spectra demonstrated that the structural changes result from a weakening and splitting of the hydrogen bond network in cellulose by the action of CBM(CBHI) at 40 degrees C for 24 h. The results of molecular dynamic simulations are consistent with the experimental conclusions, and provide a nanoscopic view of the mechanism that strong and medium H-bonds decreased dramatically when CBM was bound to the cellulose surface. The function of CBM(CBHI) is not only limited to locating intact CBHI in close proximity with cellulose fibrils, but also is involved in the structural disruption at the fibre surface. The present studies provided considerable evidence for the model of the intramolecular synergy between the catalytic domain and their CBMs.

The function of cation-binding agents in the enzymatic treatment of municipal sludge

Treatment of sludge with enzymes has previously been shown to efficiently release organic matter. However, the added enzymes were partially adsorbed to, entrapped by or bound to the sludge structure. Simultaneous decrease of enzymes activities was observed. Reduced adsorption and more effective, lower, enzyme dose was achieved in sludge pre-treated with three cation-binding agents. The enzymatic solubilisation of sludge was improved by 150%, 240% and 290%, by 50mM sodium tripolyphosphate (STPP), 25mM citric acid (CA) or 50mM ethylenediaminetetraacetate (EDTA), respectively. With cation binders, the lower relative enzyme dose 0.2 (13.7mg/g total solids (TS)) released 3.5 times higher COD than enzyme dose 1 (68.5mg/g TS) alone. In the presence of 25mM CA, 75% added protease remained soluble. In the presence of 50mM CA, EDTA or STPP, 50% of alpha-amylase and cellulase remained soluble. At 200mM STPP, alpha-amylase was inactive, and the efficiency of enzymatic sludge hydrolysis decreased. CA was the most effective of the three cation-binding agents tested. It is biodegradable and can be produced endogenously by the microorganisms in sludge. CA has the greatest potential for the practical application to enhance biogas production. This paper reports on the possible mechanisms of enzymes adsorption to the sludge matrix and possible methods of decreasing the adsorption. We suggest that steric hindrances were responsible for the decreased enzymatic sludge solubilisation and that polyvalent metal ions were directly involved in adsorption of enzymes to sludge matrix. The addition of cation binders eliminated both phenomena and thereby improved the enzymatic solubilisation of sludge.

Microscale analysis of in vitro anaerobic degradation of lignocellulosic wastes by rumen microorganisms

Anaerobic degradation of lignin in waste straw by ruminal microbes was directly observed using atomic force microscope (AFM). A series of high-resolution AFM images of the straw surface in the biodegradation show that the wax flakelets and lignin granules covering the straw surface were removed by the rumen microorganisms. Such degradation resulted in an exposure of cellulose fibers located inside the straw. The appearance of holes and microfibers in fermentation reveals that tunneling might be one of the ways for rumen microorganisms to attack the straw. Increases in the atomic ratio of oxygen to carbon (O/C) and the ratio C2/C3 in C1s spectra of X-ray photoelectron spectroscopy confirm that more cellulose was exposed on the surface after the anaerobic fermentation of straw. Gas chromatography/mass spectrometry analytical results demonstrate the decomposition of lignin by rumen microorganisms. Fourier transform infrared spectroscopy spectra and the measurement of degradation efficiency of the main straw components further verify these microscaled observations.

Application of cellulose-based self-assembled tri-enzyme system in a pseudo-reagent-less biosensor for biogenic catecholamine detection

Amorphous cellulose was used as a specific carrier for the deposition of self-assembled multienzyme complexes capable of catalyzing coupled reactions. Naturally glycosylated fungal cellobiohydrolases (CBHs) of glycosyl hydrolase families 6 and 7 were specifically deposited onto the cellulose surface through their family I cellulose-binding modules (CBM). Naturally glycosylated fungal laccase was then deposited onto the preformed glycoprotein layer pretreated by ConA, through the interaction of mannosyl moieties of fungal glycoproteins with the multivalent lectin. The formation of a cellulase-ConA-laccase composite was proven by direct and indirect determination of activity of immobilized laccase. In the absence of cellulases and ConA, no laccase deposition onto the cellulose surface was observed. Finally, basidiomycetous cellobiose dehydrogenase (CDH) was deposited onto the cellulose surface through the specific interaction of its FAD domain with cellulose. The obtained paste was applied onto the surface of a Clark-type oxygen electrode and covered with a dialysis membrane. In the presence of traces of catechol or dopamine as mediators, the obtained immobilized multienzyme composite was capable of the coupled oxidation of cellulose by dissolved oxygen, thus providing the basis for a sensitive assay of the mediator. Swollen amorphous cellulose plays three different roles in the obtained biosensor as: (i) a gelforming matrix that captures the analyte and its oxidized intermediate, (ii) a specific carrier for protein self-assembly, and (iii) a source of excess substrate for a pseudo-reagent-less assay with signal amplification. The detection limit of such a tri-enzyme biosensor is 50-100 nM dopamine.

Characterization of bioscoured cotton fabrics using FT-IR ATR spectroscopy and microscopy techniques

The effects of bioscouring were investigated by characterizing the chemical and physical surface changes of cotton fabrics using a purified pectinase enzyme from Bacillus subtilis strain WSHB04-02. Fourier-transform infrared (FT-IR) attenuated total-reflectance (ATR) spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM) techniques were employed. FT-IR ATR spectroscopy provided a fast and semi-quantitative assessment of the removal of pectins and/or waxes on the cotton surface by comparing the changes in intensity of the carbonyl peak induced by HCl vapor treatment at around 1736 cm(-1). The bioscoured surface could be clearly distinguished from those of untreated and alkali-treated cotton fibers using a combination of SEM and AFM. The images produced using these techniques revealed that the surface morphography and topography of the cotton fibers were shaped by the etching action mode of pectinases during bioscouring. These findings demonstrated that AFM is a useful supplement to SEM in characterizing cotton surfaces.

Model cellulose films exposed to H. insolens glucoside hydrolase family 45 endo-cellulase--the effect of the carbohydrate-binding module

The effects of enzyme structure and activity on the degradation of model cellulose substrates were investigated by ellipsometry for the cellulase Humicola insolens GH45. The inactive variant D10N was found to adsorb at the cellulose surface but also to be incorporated into the cellulose films to an extent that depended on pH. For the native protein, the initial adsorption monitored for the inactive variant D10N was followed by enzyme-mediated degradation of the cellulose films. Again, a dependence on pH was found, such that higher pH resulted in slower enzymatic degradation. Removing the carbohydrate-binding module eliminated this pH dependence but also resulted in a decreased adsorption to the cellulose surface, and in a decreased net catalytic effect.