The effects of the rotating-hinge total knee replacement on gait and stair stepping

Long Term Results of a Rotating Hinge Total Knee Prosthesis With Carbon-Fiber Reinforced Poly-Ether-Ether-Ketone (CFR-PEEK) as Bearing Material

Background: The use of rotating hinge (RH) prostheses for severe primary as well as revision arthroplasty is widely established. Due to the steadily increasing number of RH prostheses, we aimed to assess the complication frequencies, complication types and clinical outcomes of a modern RH hinge prosthesis using a new bearing material with a minimum follow-up of 7 years.

Methods: Fifty-six consecutive patients who received the EnduRo^® RH prosthesis using carbon-fiber reinforced poly-ether-ether-ketone (CFR-PEEK) as bearing material were included in this prospective study: 21 patients (37.5%) received the prosthesis as a primary total knee arthroplasty (TKA) and 35 patients (62.5%) underwent revision total knee arthroplasties (rTKA). Clinical and radiographic examinations were performed preoperatively, postoperatively after three and 12 months and annually thereafter. Clinical scores were documented for each patient. Competing risk analysis was assessed with respect to indication and failure mode.

Results: Knee Society Score (KSS), Western Ontario and McMaster Osteoarthritis Index (WOMAC), Oxford Knee Score (OKS) and range of motion (ROM) improved significantly compared to preoperative values (p < 0.0001). The overall cumulative incidence for revision surgery was 23.6% at 7 years and the cumulative incidence for complications associated with failure of the prothesis was 5.6% at 7 years, respectively. Complications occurred more frequently in the revision group (p = 0.002).

Conclusion: The evaluated RH prosthesis provided reliable and durable results for a minimum follow-up of 7 years. Prosthesis survival was successful considering the complexity of the cases. The use of this RH system in primary patients showed high survival rates and long-term functional outcomes and clinical outcomes proved to be satisfying in both revision and primary cases. No adverse events were associated with the new bearing material CFR-PEEK.

Contemporary rotating hinge arthroplasty can safely be recommended in complex primary surgery

PURPOSE

The objective was to evaluate clinical and radiological outcomes, survival rate and complications of primary contemporary rotating hinged total knee arthroplasty (CRH-TKA).

METHODS

Through a national multicenter retrospective study (14 centers), 112 primary CRH-TKA performed between 2006 and 2011 were included. Indications were: severe frontal plane deformity (55%), inflammatory, constitutional, congenital or post-trauma arthritis (26%), ligament laxity (10%), primary osteoarthritis (9%). Population was elderly (68 ± 13), sedentary (37.5% with a Devane score ≥ 3) and with important comorbidities (87% with ASA score ≥ 2). A clinical (KSS, Oxford scores) and radiological evaluation (implant loosening), as well as survival and reoperation rates assessment, were performed.

RESULTS

At last follow-up (7 ± 3 years), KSS and Oxford scores were 64 ± 43 and 33 ± 10 each with a significant improvement of both scores overtime (respectively, p = 0.047 and p < 0.001). Twenty-eight complications (25%) were reported: 12 infections, 6 stiffness, 5 aseptic loosening and 5 patellofemoral instabilities. All in all, 91% (n = 102) of implants were still sealed and in place, 6% (n = 7) required revision and 3% (n = 3) were loose but could not undergo revision due to weak general health status. Mortality rate (18%, n = 20), linked to comorbidities, was high.

CONCLUSION

Clinical outcomes and survival of primary CRH-TKA are acceptable given the difficult and complex clinical situations it faced, but with high infection rate. In primary surgery, for patients with severe deformity, bone loss or ligament laxity, the use of CRH-TKA can be recommended. The choice of these implants must remain cautious and limited to situations not allowing the use of less constrained implants.

LEVEL OF EVIDENCE

Retrospective therapeutic and cohort study, Level III; retrospective case series, Level IV.

Analysis of Biomechanical Differences Between Condylar Constrained Knee and Rotating Hinged Implants: A Numerical Study

BACKGROUND

Different levels of constraint for total knee arthroplasty can be considered for revision surgeries. While prior studies have assessed the clinical impact and patient outcomes of condylar constrained knee (CCK) and rotating hinged (RTH) implants, nowadays little is known about the biomechanical effects induced by different levels of constraint on bone stress and implant micromotions.

METHODS

CCK and RTH implant models were analyzed using a previously validated numerical model. Each system was investigated during a squat and a lunge motor task. The force in the joint, the bone and implant stresses, and micromotions in this latter were analyzed and compared among designs.

RESULTS

Different activities induced similar bone stress distributions in both implants. The RTH implant induces mostly high stress compared to the CCK implant, especially in the region close to tip of the stem. However, in the proximal tibia, the stresses achieved with the CCK implant is higher than the one calculated for the RTH design, due to the presence of the post-cam system. Accordingly, the condylar constrained design shows higher implant micromotions due to the greater torsional constraint.

CONCLUSION

Different levels of constraint in revision arthroplasty were always associated with different biomechanical outputs. RTH implants are characterized by higher tibial stress especially in the region close to the stem tip; condylar implants, instead, increase the proximal tibial stress and therefore implant micromotions, as a result of the presence of the post-cam mechanism. Surgeons will have to consider these findings to guarantee the best outcome for the patient and the related change in the bone stress and implant fixation induced by different levels of constrain in a total knee arthroplasty.

Early complications and causes of revision after rotating-hinge TKA

INTRODUCTION

The use of rotating-hinge total knee arthroplasties (TKA), despite several developments in prosthetic design, remains controversial. Results as well as indications of these devices are still discussed in primary intention and for young patients. The aim was to analyze early complications and survival rate of rotating-hinge TKA in primary intention and for revisions.

METHODS

A retrospective study included all the patients operated for primary or revision TKA procedure using a rotating-hinge TKA between 2015 and 2018. Clinical and radiological data were collected before surgery and then at a minimum follow-up of 1 year. The primary endpoint was the aseptic revision-free survival rate. Secondary endpoints were the overall survival rate, IKS scores, range of motion and patellar complications.

RESULTS

Forty patients were included at an average follow-up of 18 months. Primary implantation was performed for 12 patients (30%), and revision for 28 cases (70%). At a mean follow-up of 18 months, only one implant was removed for a septic cause. The cumulative survival rate at 24 months was 95%. At final review, eight knees (20%) had been revised, five (12.5%) due to infection, two (5%) because of extensor mechanism failure, two (5%) for global stiffness. The objective and subjective IKS were significantly higher postoperatively in both primary and revision groups (p < 0.0001). Patellar height was significantly smaller after revision (p = 0.04), while ROM significantly improved in this group (p = 0.02). At final endpoint, one implant was removed for a septic cause.

CONCLUSION

This rotating-hinge TKA provides satisfying clinical and functional outcomes in primary intentions and in revision cases. There was no implant-associated complication. The complication rate remains high for revision surgery cases, mostly due to previous joint infections and poor soft tissue quality causing extensor mechanism failure. A longer-term study should be conducted to confirm this trend.

Midterm Results of a New Rotating Hinge Knee Implant: A 5-Year Follow-Up

Background

In the current study, we investigated midterm results of a new rotating hinge total knee arthroplasty (EnduRo prosthesis), which uses a new bearing material (CFR PEEK).

Methods

We prospectively analysed data of 50 patients with a minimum follow-up of 5 years. In 24 (48%) patients, a primary implantation was performed and 26 (52%) were revision cases. Clinical and radiographic examinations were performed preoperatively as well as postoperatively after 3 and 12 months and annually thereafter. The Knee Society Score (KSS), WOMAC, Oxford Knee Score (OKS), and range of motion (ROM) were used for clinical assessment.

Results

KSS, WOMAC, OKS, and ROM significantly improved between the preoperative and the follow-up investigations. The overall survival rate with revision for any reason as an endpoint was 77.9% after five years. The number of complications was significantly higher in the revision group (p = 0.003).

Conclusion

The EnduRo prosthesis provides highly satisfying clinical and functional results in severe primary as well as in revision cases. Implant-associated complications were rare. However, in cases of revision surgery, the risk for complications was considerably high, mostly related to previous joint infections and poor soft tissue quality.

Motion analysis of patients after knee arthroplasty during activities of daily living--a systematic review

BACKGROUND

Motion analysis with optoelectronic systems is a frequently used method to analyze the patient's gait as well as further relevant activities of daily living before and after knee arthroplasty. The aim of this systematic review was to identify the investigated activities of daily living and to show an extensive presentation of gait analysis studies with patients after knee arthroplasty surgery.

METHODS

The articles were searched in electronic databases: MEDPILOT, EMBASE. To identify articles that potentially met the inclusion criteria the titles and abstracts were screened. The level of evidence was analyzed for the included articles.

RESULTS

Overall 3989 abstracts were reviewed and 87 full text articles were included. Ten activities of daily living were identified. Level walking was the most frequently investigated activity (78.2%). In 94.6% the sagittal plane kinematics were analyzed and 5.3% presented the results in all three planes. Knee adduction moments were determined in 33.3% of the included articles. At least two joints were investigated in 40.2%, including the impaired knee and further body parts (ankle, hip, pelvis, trunk). Unicondylar knee arthroplasty was addressed in 14.1%.

CONCLUSIONS

Besides level walking, it is necessary to examine physical more demanding activities of daily living to detect potential kinematic and kinetic abnormalities. Further research should imply the evaluation of sagittal, frontal and transverse plane joint and muscle function based on accurate inverse-dynamic techniques. More motion analysis studies are necessary that address unicondylar knee arthroplasty in comparison to total knee arthroplasty and healthy controls.

Difference in knee rotation between total and unicompartmental knee arthroplasties during stair climbing

PURPOSE

The purpose of this study was to compare knee kinematics during stair walking in patients with simultaneous total knee arthroplasty (TKA) and unicompartmental knee arthroplasties (UKA). It was hypothesized that UKA would reproduce more normalized knee kinematics than TKA during stair ascent and descent.

METHODS

Six patients who received UKA in one knee and TKA in the other knee were included in the study. For this study, a four-step staircase was assembled with two force platforms being positioned at the centre of the second and third steps. Each patient was attached with 16 reflective markers at both lower extremities and was asked to perform five roundtrip trials of stair climbing. Kinematic parameters including stance duration, knee angle, vertical ground reaction force (GRF), joint reaction force, and moments were obtained and analysed using a10-camera motion system (VICON, Oxford, UK). Nonparametric Friedman test was used to compare the results between two arthroplasty methods and between stair ascent and descent.

RESULTS

Compared to TKA, UKA knees exhibited significantly greater degree of rotation in transverse planes (5.0 degrees during ascent and 6.0 degrees during descent on average), but showed no difference in terms of the other parameters. When comparing the results during stair ascent with descent, overall greater knee angle, vertical GRF, joint reaction force, and moment were observed during stair descent.

CONCLUSIONS

Both UKA and TKA knees have shown overall similar knee kinematics, though UKA knee may allow greater degree of rotation freedom, which resembles normal knee kinematics during stair walking.

Early results of a new rotating hinge knee implant

Background. Indication for rotating hinge (RH) total knee arthroplasty (TKA) includes primary and revision cases, with contradictory results. The aim of this study was to report prospective early results of a new modular rotating hinge TKA (EnduRo). For this implant several new design features and a new bearing material (carbon-fiber reinforced poly-ether-ether-ketone) have been developed. Furthermore, we tried to establish a new classification of failure modes for revision TKA. Methods. 152 EnduRo rotating-hinge prostheses were implanted in two centers. In 90 patients a primary implantation has been performed and 62 patients were revision cases. Knee Society Score (KSS), Western Ontario and McMaster Osteoarthritis Index (WOMAC), Oxford Knee Score (OKS), and Range of motion (ROM) were assessed before surgery, 3 months postoperatively, 12 months postoperatively, and annually thereafter. We defined 3 types of complications: Type 1, infection; type 2, periprosthetic complications; type 3, implant failures. Results. KSS, WOMAC, OKS, and ROM revealed significant improvements between the preoperative and the follow-up investigations. There were 14 complications (9.2%) leading to revision surgery, predominantly type 2. Conclusion. Our study shows excellent clinical results of the EnduRo TKA. Furthermore, no premature material failure or unusual biological response to the new bearing material could be detected.

Primary total knee arthroplasty using rotating-hinge prosthesis in severely affected knees

PURPOSE

A rotating-hinge total knee prosthesis may be utilized for the treatment of global instability or severe bone loss around the knee. The outcome of primary total knee arthroplasty (TKA) using Endo-Modell (Link(®)) rotating-hinge prosthesis was evaluated.

METHODS

Retrospectively, review of 50 cases (40 patients) at a mean follow-up of 15 years (range, 10-18) who underwent primary TKA using Endo-Modell (Link(®)) was performed. Indications included severe primary osteoarthritis with substantial ligament laxity, severe rheumatic arthritis with extreme ligament instability and bone loss, supracondylar nonunion, charcot arthropathy, and posttraumatic arthritis. Knee Society Score (KSS) and radiographic analysis were done for preoperative and at latest follow-up. Statistical analysis was done using the Student's t test with the level of significance of p < 0.05.

RESULTS

Overall, the rotating-hinge arthroplasty resulted in improved knee functioning. The KSS improved (p < 0.001) from a preoperative mean of 38 ± 14.3 (SD) points to a postoperative mean of 73 ± 12.8 points; the functional score improved (n.s.) from 36 ± 19.5 points to 47 ± 23.5 points. Mean range of motion at the most recent clinical follow-up evaluation was 102 ± 9°. However, all (100%) patients needed some form of assisted devices for walking and a relatively large number of deep infections (14%) were encountered.

CONCLUSIONS

Reconstruction with a rotating-hinge total knee prosthesis provided substantial improvement in function and reduction in pain. However, the possibility of assisted walking and high rate of deep infection should be encountered.

LEVEL OF EVIDENCE

Retrospective therapeutic study, Level IV.

Complications following rotating hinge Endo-Modell (Link) knee arthroplasty

BACKGROUND

Rotating hinge knee prostheses are indicated in revisions especially when major ligament laxity or substantial AP deformities are present. These situations make ligament balancing difficult with less constrained design implants. Despite its use for nearly 50 years, this type of prosthesis continues to have a poor reputation due to a high complication rate.

HYPOTHESIS

Complications are frequent after this type of arthroplasty and the complication rate is similar in primary or revision arthroplasties. The objective of this study is to report the medium-term results of these implants and determine the eventual predictive factors of complications in order to refine operative indications.

MATERIAL AND METHODS

In this retrospective study of patients operated on between 1998 and 2006, 85 Endo-Modell (Link) rotating hinge knee prostheses had been used in 61 females and 24 males. The mean age at surgery was 72.4 years (range, 32-92 years). Fifty-two arthroplasties were primary and 33 were revisions either for loosening (24) or deep infections (9). The mean follow-up was 36 months+/-22 (range, 0-75 months).

RESULTS

Complications were observed in 24 patients (28.2%): nine deep infections, four patellar complications, and three cases of aseptic loosening. No significant difference was found between the primary arthroplasties and the revisions regarding all complication types. A significant relation was established between the occurrence of a complication and presence of several associated comorbidity factors (obesity, heart disease, diabetes, etc.).

DISCUSSION

The use of this type of implant carries a high risk of complications, higher than the one pertaining to unconstrained design prostheses; this fact is noted irrespective of the surgical indication and other comparison elements. The leading criteria to poor functional results appear to be the indication (gonarthrosis with substantial ligament laxity at primary surgery) and the number of associated comorbidities. These prostheses should therefore be restricted to selected indications, notably in view of the fact that less constrained prostheses give superior outcomes.

LEVEL OF EVIDENCE

Level IV. Retrospective therapeutic study.

Postural responses following a rotational support surface perturbation, following knee joint replacement: frontal plane rotations

Total knee arthroplasty (TKA) is associated with altered sensory and motor functions of the knee which may impair balance control when standing and walking. This study examined the organization of electromyographic and kinematic postural responses to frontal plane support surface rotations, after TKA. Eight TKA patients and nine control participants volunteered. Patients demonstrated changes in onset latency of rectus femoris and gluteus medius, and in amplitude of muscle activity in tibialis anterior, gastrocnemius, rectus femoris, and gluteus medius, for both perturbation directions, and for both the surgical and sound limbs. Peak knee joint angular velocity was reduced among the patients for both perturbation directions and both the surgical and sound limbs, and patients demonstrated greater peak center of mass displacement. The CNS appears to alter the response to postural perturbation of both lower limbs, based on the reduced capacities of the surgical limb. Impaired detection of the valgus-varus loading of the knee joints may lead to the changes in muscle activity and resultant kinematics. Clinically, these findings are relevant in understanding that fully recovered TKA patients may continue to demonstrate balance impairments, and that balance training during physical rehabilitation may be advantageous to these patients.

Organization of postural responses following a rotational support surface perturbation, after TKA: sagittal plane rotations

Proprioceptive dysfunction, related to osteoarthritis and total knee arthroplasty (TKA) may be related to changes in gait, and may result in balance impairment. This study examined the organization of postural responses to rotational support surface perturbations after TKA. Eight TKA patients and nine control participants volunteered. EMG was collected bilaterally from lower limb muscles. Kinematic data were collected using an OPTOTRAK system. The temporal pattern of muscle activation was preserved in both the surgical and sound limbs of the patient groups, while muscle activation amplitude was reduced. Knee joint angular displacement was reduced in both limbs among patients. COM displacement was not different. Patients demonstrated a different method in recovering posture control following a postural perturbation. Bilateral changes appear to reflect a simplification in the organization of the motor response, in response to the needs of the injured, or previously injured limb.

The effectiveness of self-adjustable custom and off-the-shelf bracing in the treatment of varus gonarthrosis

BACKGROUND

A recent development in valgus-producing knee braces has been the adjustable "unloader" brace. The purpose of this study was to compare the effectiveness of off-the-shelf and custom-made patient-adjustable, valgus-producing knee unloader braces in relieving pain, reducing stiffness, and improving function and in reducing varus angulation and the peak adduction moments about the knee during gait and stair-stepping in patients with painful varus gonarthrosis of the knee.

METHODS

Ten adult patients served as their own controls for the measurement of baseline values and then wore each of the two braces, one after the other, for four to five weeks in a random order. Pain, stiffness, and function were assessed with the Western Ontario and McMaster Universities Osteoarthritis Index. Gait and stair-stepping were evaluated with a three-dimensional motion analysis system and multicomponent force platform. Full-length (hip, knee, and ankle) standing anteroposterior radiographs were used to determine alignment of the knee.

RESULTS

Both braces significantly reduced pain and stiffness (p<0.05), with the custom brace reducing stiffness significantly more than the off-the-shelf brace (p=0.030). The custom brace significantly improved function (p=0.010) and reduced the peak knee adduction moments during gait (p=0.033) and stair-stepping (p=0.002) compared with baseline values and compared with the off-the-shelf brace (p=0.029 and p=0.027, respectively). The custom brace significantly reduced varus angulation of the knee by 1.5 degrees compared with baseline (p=0.001) and by 1.3 degrees compared with the off-the-shelf brace (p=0.009). The off-the-shelf brace did not significantly reduce the varus angle.

CONCLUSIONS

We investigated only the short-term effects of custom and off-the-shelf patient-adjustable valgus-producing knee "unloader" braces and found that patients with varus gonarthrosis of the knee may benefit significantly with respect to pain relief and reduced stiffness from use of either brace. However, such patients may experience additional significant benefit in improved function and reduced stiffness, varus angulation, and medial compartment loading of the knee from use of the custom-made patient-adjustable brace.

Bilateral total knee arthroplasty increases the propensity to trip on an obstacle

Tripping over an obstacle is the most frequent cause of falls. We examined the effects of total knee arthroplasty on obstacle avoidance success rates in older adults. Obstacle avoidance success rates, body mass index, visual acuity, contrast sensitivity, depth perception, and single-leg stance duration were evaluated in 29 subjects who had bilateral total knee arthroplasties (age range, 72.6 +/- 5.4 years) and 27 age-matched healthy control subjects (age range, 70.6 +/- 5.5 years). The patients who had total knee arthroplasties had a lower obstacle avoidance success rate, lower single-leg stance duration, and greater body mass index than control subjects. Age, contrast sensitivity, and depth perception were not different between patients who had total knee arthroplasties and control subjects. Obstacle avoidance success rates decreased linearly as single-leg stance duration decreased in the control group and across all groups, but not in the group that had total knee arthroplasties. Linear relationships between obstacle avoidance success rates and body mass index existed for all subjects but not for the group that had total knee arthroplasties or the control group individually. Total knee arthroplasty reduces obstacle avoidance success rate, suggesting that persons who have total knee arthroplasties have an increased propensity to trip on an obstacle and fall. Increased body mass index and decreased single-leg stance duration in patients who have total knee arthroplasties are associated with a decreased obstacle avoidance success rate.

Effects of knee pain relief in osteoarthritis on gait and stair-stepping

Osteoarthritic knee pain affects patient mobility. Relief of knee pain in osteoarthritis has been reported to increase loading of the knee during gait, but it is unknown whether such pain relief enhances knee loading during more demanding activities such as stair-stepping. The gait of 19 patients and stair-stepping of 14 patients with painful medial compartment osteoarthritis of the knee was assessed before and after pain-relieving intraarticular injection of the knee and compared with those of 21 healthy control subjects. There were significant increases in gait velocity, cadence, maximum external knee adduction moment (indicating increased loading in the medial compartment of the knee), and maximum external hip adduction and ankle abduction moments immediately after the injection. With the exception of velocity and ankle abduction moment, these variables were returned to levels that were not statistically different from those of the control subjects. However, no significant differences were found during stair-stepping in the external adduction-abduction moments about the knee, hip, or ankle after injection. Furthermore, the postinjection magnitudes of these variables during stair-stepping were significantly less than those of the controls. Therefore, although the relief of knee pain is sufficient to enhance gait function in osteoarthritis of the knee, it is insufficient to enhance stair-stepping function.

The modular segmental kinematic rotating hinge for nonneoplastic limb salvage

From January 1980 to July 1998, 25 patients (26 knees) were treated with an arthroplasty using a Modular Segmental Kinematic Rotating Hinge total knee prosthesis for nonneoplastic limb salvage. The indications included: nonunion of a periprosthetic femur fracture (11 knees), severe bone loss and ligamentous instability (eight knees), nonunion of a supracondylar femur fracture (four knees), acute periprosthetic fracture (one knee), fracture of a previous hinge (one knee), and prior resection arthroplasty (one knee). The average age of the patients was 72.3 years. Twenty-two arthroplasties were revisions. The average followup was 58.5 months. At the latest followup, knee extension averaged 2.4 degrees and flexion averaged 93.6 degrees. The Knee Society knee score improved from an average of 45.4 preoperatively to 75.5. Preoperatively, functional scores averaged 8.6 and improved to 25. Complications occurred in eight patients. The most common was deep infection (five patients). The use of the Modular Kinematic Rotating Hinge for nonneoplastic limb salvage represents a small proportion (0.14%) of all primary and revision knee arthroplasties done at our institution. The indications for the surgery are for a highly complex and small subset of patients. The patients in the current study gained significant improvement in overall range of motion, Knee Society knee scores, and functional scores when this prosthesis was used.

Effect of stair descent loading on ultra-high molecular weight polyethylene wear in a force-controlled knee simulator

A loading protocol approximating forces, torques and motions at the knee during stair descent was developed from previously published data for input into a force-controlled knee simulator. A set of total knee replacements (TKRs) was subjected to standard walking cycles and stair descent cycles at a ratio of 70: 1 for 5 million cycles. Another set of implants with similar articular geometry and the same ultra-high molecular weight polyethylene (UHMWPE) resin (GUR 415), sterilization and packaging was tested with standard walking cycles only. Implant kinematics, gravimetric wear and surface roughness of the UHMWPE inserts were analysed for both sets of implants. Contact stresses were calculated for both loading protocols using a Hertzian line contact model. Significantly greater weight loss (p < 0.05) and more severe surface damage of UHMWPE inserts resulted with the walking + stair descent loading protocol compared to walking cycles only. Anterior-posterior (AP) tibiofemoral contact point displacements were lower during stair descent than walking, but not significantly different (p = 0.05). Contact stresses were significantly higher during stair descent than walking, owing to higher axial loads and the smaller radius of curvature of the femoral components at higher flexion angles. High contact stresses on UHMWPE components are likely to accelerate the fatigue of the material, resulting in more severe wear, similar to what is observed in retrieved implants. Thus the inclusion of loading protocols for activities of daily living in addition to walking is warranted for more realistic in vitro testing of TKRs.

The effects of early rollback in total knee arthroplasty on stair stepping

We investigated the effects of early compared with late (ie, in flexion) rollback on quadriceps efficiency during stair stepping. We studied 10 patients with the IB II (Zimmer, Warsaw, IN) total knee arthroplasty (TKA), designed to enforce rollback at 73 degrees of knee flexion; 9 patients with the Maxim PS (Biomet, Inc, Warsaw, IN) TKA, designed to enforce rollback between 20 degrees and 30 degrees of flexion; 8 patients with the TRAC PS (Biomet, Inc, Warsaw, IN) mobile bearing TKA, designed to enforce rollback at 8 degrees of flexion; and 21 healthy control subjects during stair stepping. We measured the external knee flexion moments, which must be largely balanced by quadriceps force acting over the quadriceps lever arm, as indicators of quadriceps efficiency. The peak external knee flexion moment generated by the IB II patients during stair stepping was 12.4% and occurred at 65 degrees of knee flexion. This moment was significantly less (P=.006) than the peak moment, 17.6%, generated by the healthy controls. Knee flexion for the IB II patients did not reach 73 degrees, and rollback was not enforced until after the peak moment (ie, maximum demands on the quadriceps) had been attained. The peak moments generated by the TRAC PS patients, 14.2%, and Maxim patients, 14.8%, were not significantly different from that of the controls. These results suggest that early as compared with late rollback returns more normal quadriceps efficiency during stair stepping.

The kinematic rotating hinge prosthesis for complex knee arthroplasty

Fifty-eight patients (69 knees) treated with the Kinematic Rotating Hinged knee prosthesis for complex primary and salvage revision total knee arthroplasty were followed up for an average of 75.2 months (range, 24-199 months). The indications for use of the Kinematic Rotating Hinged knee prosthesis included severe bone loss combined with ligamentous instability (30 knees), nonunion of a periprosthetic fracture (10 knees), an acute periprosthetic fracture (nine knees), severe collateral ligamentous instability (five knees), reimplantation for infection (six knees), nonunion of a supracondylar femoral fracture (four knees), congenital dislocation of the knee (three knees), and treatment of a severely comminuted distal femur (two knees). At the time of surgery, the average patient age was 72 years (range, 46-92 years). Preoperatively, knee extension averaged 4.94 degrees (range, 0 degrees-40 degrees) and flexion averaged 81 degrees (range, 15 degrees-125 degrees). At final followup, knee extension averaged 1.25 degrees (range, -5 degrees-25 degrees) and flexion averaged 94.2 degrees (range, 5 degrees-125 degrees). The preoperative Knee Society Knee score averaged 40.3 points (range, 2-93 points) and improved to 77 points (range, 33-99 points) at final followup. Complications were numerous: 23 (32%) patients experienced at least one complication and 12 (17%) patients had two or more complications. Deep periprosthetic infection was the most common complication (14.5%), followed by patellar complications (13%), and prosthetic component breakage (10%). During the period of this study, there were 15,798 primary and 2673 revision total knee arthroplasties done at the authors' institution. The patients receiving a Kinematic Rotating Hinged knee prosthesis represent a highly complex and small subset (0.37%) of the overall population having knee arthroplasty. Although the use of the Kinematic Rotating Hinged knee prosthesis for these limited indications has been useful for the authors, the incidence of complications and the poor outcome of these complications is disconcerting. Hinged total knee arthroplasty should be reserved for the final salvage option of the treatment options available when doing complex primary and salvage revision knee arthroplasties.

Total knee arthroplasty using the S-ROM mobile-bearing hinge prosthesis

A retrospective study was performed on 15 patients receiving 16 S-ROM mobile-bearing hinge total knee prostheses that were evaluated with at least a 2-year follow-up (range, 27-71 months). Indications for its use included severe instability and bone loss. The average patient age was 63 years (range, 33-83 years). There were 15 revision arthroplasties and 1 primary arthroplasty. Knee Society scores showed notable improvement in pain, motion, and stability (33.6 preoperatively vs 76.5 postoperatively; P <.0001) and approached significant improvement in function (29.2 preoperatively vs 43.5 postoperatively; P =.11). After excluding a patient with a traumatically ruptured patellar tendon, the probability of the latter comparison improved (P <.01). There was no evidence of loosening, and complete bone apposition was seen in nearly all cases. A high percentage of satisfactory results can be achieved when using this mobile-bearing hinge knee prosthesis for these indications.

The TRAC PS mobile-bearing prosthesis: design rationale and in vivo 3-dimensional laxity

We present a posterior stabilized mobile-bearing prosthesis, TRAC PS, which has congruent contact from full extension to full flexion, allows for freedom of internal-external rotation, and has an automatic posterior shift in tibiofemoral contact on the tibia to maximize the quadriceps lever arm in flexion. TRAC PS has 2 radii of curvature in the sagittal plane, 1 for the distal femoral condyles and 1 for the posterior femoral condyles, as does the normal knee. The distal and posterior femoral condyles articulate congruently in the inner tracks or the outer tracks of the polyethylene bearing, respectively. Anterior or posterior sliding of the femoral condyles on the bearing or of the bearing on the tibial tray cannot occur, providing inherent anterior and posterior stability. Three-dimensional knee laxity testing was performed on 17 patients from 12 months to 25 months after total knee arthroplasty with the TRAC PS and on 18 healthy control subjects of similar ages. Normal ligament balancing and normal internal-external rotational laxity were achieved with the TRAC PS prosthesis. Anterior and posterior laxity in the patients with TRAC PS was significantly reduced compared with that of the control subjects.