A comparison of protocols for the optimisation of detection of bacteria using a surface acoustic wave (SAW) biosensor

MEMS Acoustic Sensors: Charting the Path from Research to Real-World Applications

MEMS acoustic sensors are a type of physical quantity sensor based on MEMS manufacturing technology for detecting sound waves. They utilize various sensitive structures such as thin films, cantilever beams, or cilia to collect acoustic energy, and use certain transduction principles to read out the generated strain, thereby obtaining the targeted acoustic signal's information, such as its intensity, direction, and distribution. Due to their advantages in miniaturization, low power consumption, high precision, high consistency, high repeatability, high reliability, and ease of integration, MEMS acoustic sensors are widely applied in many areas, such as consumer electronics, industrial perception, military equipment, and health monitoring. Through different sensing mechanisms, they can be used to detect sound energy density, acoustic pressure distribution, and sound wave direction. This article focuses on piezoelectric, piezoresistive, capacitive, and optical MEMS acoustic sensors, showcasing their development in recent years, as well as innovations in their structure, process, and design methods. Then, this review compares the performance of devices with similar working principles. MEMS acoustic sensors have been increasingly widely applied in various fields, including traditional advantage areas such as microphones, stethoscopes, hydrophones, and ultrasound imaging, and cutting-edge fields such as biomedical wearable and implantable devices.

Foodborne pathogen detection using surface acoustic wave biosensors: a review

This paper summarizes several attractive surface acoustic wave (SAW) biosensors, including Love-wave sensors, dual-channel SAW sensors, langasite SAW sensors, and SAW syringe filters. SAW sensors with different piezoelectric materials and high-frequency SAW sensors used for identifying the food pathogenic bacteria Escherichia coli (E. coli) are discussed together with the examples of methods based on such sensing technology that have been effectively utilized in diagnostics and epidemiological research. This review also emphasizes some of the limitations of using these biosensors, which have prompted the increased need for more rapid, sensitive, selective, portable, power-efficient, and low-cost methods for detecting these pathogens. It is envisioned that SAW devices will have remarkable significance in the future.

Biosensing Technologies for Detecting Legionella in Environmental Samples: A Systematic Review

The detection of Legionella in environmental samples, such as water, is crucial for public health monitoring and outbreak prevention. Although effective, traditional detection methods, including culture-based techniques and polymerase chain reaction, have limitations such as long processing times, trained operators, and the need for specialized laboratory equipment. Biosensing technologies offer a promising alternative due to their rapid, sensitive, cost-effectiveness, and on-site detection capabilities. To summarize the current advancements in biosensor development for detecting Legionella in environmental samples, we used 'Legionella' AND 'biosensors' NEAR 'environmental samples' OR 'water' as keywords searching through the most relevant biomedical databases for research articles. After removing duplicates and inadequate articles from the n.1268 records identified using the PRISMA methodology exclusion criteria, we selected n.65 full-text articles which suited the inclusion criteria. Different results between the studies describing the current biosensing techniques, including optical, electrochemical, magnetic, and mass-sensitive sensors were observed. For each biosensing technique, sensitivity, specificity, and detection limits were evaluated. Furthermore, the integration of nanomaterials, microfluidics, and portable devices in biosensor systems' design were discussed, highlighting their role in enhancing detection performance. The potential challenges and future directions in the field of Legionella biosensing were also addressed, providing insights into the feasibility of implementing these technologies in routine environmental monitoring. Undoubtedly, biosensors can play a crucial role in the early detection and management of Legionella infections and outbreaks, ultimately protecting public health and safety.

Design and Fabrication of Biosensor for a Specific Microbe by Silicon-Based Interference Color System

In this paper, one of the great challenges faced by silicon-based biosensors is resolved using a biomaterial multilayer. Tiny biomolecules are deposited on silicon substrates, producing devices that have the ability to act as iridescent color sensors. The color is formed by a coating of uniform microstructures through the interference of light. The system exploits a flat, RNA-aptamer-coated silicon-based surface to which captured microbes are covalently attached. Silicon surfaces are encompassed with the layer-by-layer deposition of biomolecules, as characterized by atomic force microscopy and X-ray photoelectron spectroscopy. Furthermore, the results demonstrate an application of an RNA aptamer chip for sensing a specific bacterium. Interestingly, the detection limit for the microbe was observed to be 2 × 106 CFUmL-1 by visually observed color changes, which were confirmed further using UV-Vis reflectance spectrophotometry. In this report, a flexible method has been developed for the detection of the pathogen Sphingobium yanoikuyae, which is found in non-beverage alcohols. The optimized system is capable of detecting the specific target microbe. The simple concept of these iridescent color changes is mainly derived from the increase in thickness of the nano-ordered layers.

A Novel Prototype Biosensor Array Electrode System for Detecting the Bacterial Pathogen Salmonella typhimurium

Salmonellosis caused by Salmonella sp. has long been reported all over the world. Despite the availability of various diagnostic methods, easy and effective detection systems are still required. This report describes a dialysis membrane electrode interface disc with immobilized specific antibodies to capture antigenic Salmonella cells. The interaction of a specific Salmonella antigen with a mouse anti-Salmonella monoclonal antibody complexed to rabbit anti-mouse secondary antibody conjugated with HRP and the substrate o-aminophenol resulted in a response signal output current measured using two electrode systems (cadmium reference electrode and glassy carbon working electrode) and an agilent HP34401A 6.5 digital multimeter without a potentiostat or applied potential input. A maximum response signal output current was recorded for various concentrations of Salmonella viz., 3, 30, 300, 3000, 30,000 and 300,000 cells. The biosensor has a detection limit of three cells, which is very sensitive when compared with other detection sensors. Little non-specific response was observed using Streptococcus, Vibrio, and Pseudomonas sp. The maximum response signal output current for a dialysis membrane electrode interface disc was greater than that for gelatin, collagen, and agarose. The device and technique have a range of biological applications. This novel detection system has great potential for future development and application in surveillance for microbial pathogens.

Recent advances in acoustic wave biosensors for the detection of disease-related biomarkers: A review

In the past several decades, acoustic wave biosensors, as an emerging kind of biosensors, have been developed and widely used for the detection of mass, viscosity, conductivity and density. Varieties of applications have been explored such as medical diagnosis, drug screening, environmental monitoring, food analysis and biochemical assay. Among them, the detection of disease-related biomarkers based on acoustic sensors has aroused great research interest all over the world. In this review, the classification and characteristics of acoustic wave biosensors are briefly introduced. Then, some classical studies and recent advances in disease-related biomarker detection utilizing these biosensors are summarized and detailed, respectively. Here, the disease-related biomarkers mainly include antigens, small molecular proteins, cancer cells, viruses and VOCs. Finally, challenges and future trends of these typical acoustic wave biosensors are discussed. Compared with other reviews of acoustic wave sensors, this review highlights the great potential of typical acoustic wave biosensors for early disease screening and diagnosis compared with widely-used medical imaging. Moreover, they are integrated with other technologies for the design of multi-analyte, multi-parameter and intelligent devices, collecting more comprehensive information from biomarkers. This review provides a new perspective on the applications and optimization of acoustic wave biosensors to develop more reliable platforms for disease-related biomarker detection and disease diagnosis.

Early detection of bacteria using SPR imaging and event counting: experiments with Listeria monocytogenes and Listeria innocua

Foodborne pathogens are of significant concern in the agrifood industry and the development of associated rapid detection and identification methods are of major importance. This paper describes the novel use of resolution-optimized prism-based surface plasmon resonance imaging (RO-SPRI) and data processing for the detection of the foodborne pathogens Listeria monocytogenes and Listeria innocua. With an imaging spatial resolution on the order of individual bacteria (2.7 ± 0.5 μm × 7.9 ± 0.6 μm) over a field of view 1.5 mm2, the RO-SPRI system enabled accurate counting of individual bacteria on the sensor surface. Using this system, we demonstrate the detection of two species of Listeria at an initial concentration of 2 × 102 CFU mL-1 in less than 7 hours. The surface density of bacteria at the point of positive detection was 15 ± 4 bacteria per mm2. Our approach offers great potential for the development of fast specific detection systems based on affinity monitoring.

Micro/nano acoustofluidics: materials, phenomena, design, devices, and applications

Acoustic actuation of fluids at small scales may finally enable a comprehensive lab-on-a-chip revolution in microfluidics, overcoming long-standing difficulties in fluid and particle manipulation on-chip. In this comprehensive review, we examine the fundamentals of piezoelectricity, piezoelectric materials, and transducers; revisit the basics of acoustofluidics; and give the reader a detailed look at recent technological advances and current scientific discussions in the discipline. Recent achievements are placed in the context of classic reports for the actuation of fluid and particles via acoustic waves, both within sessile drops and closed channels. Other aspects of micro/nano acoustofluidics are examined: atomization, translation, mixing, jetting, and particle manipulation in the context of sessile drops and fluid mixing and pumping, particle manipulation, and formation of droplets in the context of closed channels, plus the most recent results at the nanoscale. These achievements will enable applications across the disciplines of chemistry, biology, medicine, energy, manufacturing, and we suspect a number of others yet unimagined. Basic design concepts and illustrative applications are highlighted in each section, with an emphasis on lab-on-a-chip applications.

Biosensors of bacterial cells

Biosensors are devices which utilize both an electrical component (transducer) and a biological component to study an environment. They are typically used to examine biological structures, organisms and processes. The field of biosensors has now become so large and varied that the technology can often seem impenetrable. Yet the principles which underlie the technology are uncomplicated, even if the details of the mechanisms are elusive. In this review we confine our analysis to relatively current advancements in biosensors for the detection of whole bacterial cells. This includes biosensors which rely on an added labeled component and biosensors which do not have a labeled component and instead detect the binding event or bound structure on the transducer. Methods to concentrate the bacteria prior to biosensor analysis are also described. The variety of biosensor types and their actual and potential uses are described.

A wireless bio-sensing microfluidic chip based on resonating 'μ-divers'

A magneto-elastic resonant 'micro-diver' system (MER-μDS) is proposed and developed for rapid liquid-phase detection of pathogens in a wireless way. The magneto-elastic micro-resonator (i.e., the μ-diver) is placed in the micro-chamber of the MER-μDS that is connected to the inlet/outlet for flow of the liquid analyte and a closed-loop micro-channel. After specific attachment of the analyte onto the μ-diver, the μ-diver is conveyed by the flow into the detection segment of the channel, around which a metal micro-coil is wound for both excitation resonance of the μ-diver and reading of its resonance frequency signal. After the pre-functionalized μ-diver captures the analyte and, then, is driven into the detection channel segment, the added mass induced resonant frequency shift can be wirelessly sensed by the coil. The micro-system features rapid and repeatable liquid-phase bio-sensing and the wireless signal readout scheme is favorable to real-time pathogen detection in liquid food, e.g., milk or juice, for food safety applications. An equivalent circuit model is established for design of the magneto-elastic μ-diver. After a bar-shaped μ-diver with length-extensional bulk-resonance mode is optimally designed and micro-fabricated, the MER-μDS is formed by micro-machining/assembling techniques. By placing a biotin-immobilized μ-diver into the wireless micro-sensing system, avidin-attached magnetic beads are detected to calibrate the mass sensitivity as 0.061 Hz pg(-1), which well confirms the modeling result. By using the antibody-immobilized μ-diver, PBS solution with an E. coli concentration of 10(2)-10(8) CFU mL(-1) is detected, resulting in a corresponding wireless f0-shift sensing signal of about 300-2300 Hz and a limit of detection of 10(2) CFU mL(-1). Food safety application potential of the MER-μDS technique is proven by detection of E. coli added to orange and apple juices (E. coli concentration: 10(4)-10(8) CFU mL(-1)).

Micro- and nano-structure based oligonucleotide sensors

This paper presents a review of micro- and nano-structure based oligonucleotide detection and quantification techniques. The characteristics of such devices make them very attractive for Point-of-Care or On-Site-Testing biosensing applications. Their small scale means that they can be robust and portable, their compatibility with modern CMOS electronics means that they can easily be incorporated into hand-held devices and their suitability for mass production means that, out of the different approaches to oligonucleotide detection, they are the most suitable for commercialisation. This review discusses the advantages of micro- and nano-structure based sensors and covers the various oligonucleotide detection techniques that have been developed to date. These include: Bulk Acoustic Wave and Surface Acoustic Wave devices, micro- and nano-cantilever sensors, gene Field Effect Transistors, and nanowire and nanopore based sensors. Oligonucleotide immobilisation techniques are also discussed.

Campylobacter spp. detection in the 21st century: a review of the recent achievements in biosensor development

Campylobacter spp. are an important cause of acute bacterial diseases in humans worldwide. Many bacterial species in the Campylobacter genus are considered harmful and may cause several infectious diseases. Currently, there are no commercial biosensors available to detect Campylobacter spp. in food matrices, and little to no testing has been done in research laboratories with actual food matrices. Biosensors potentially provide a powerful means to detect Campylobacter spp. with the advantages of high sensitivity (low limits of detection with a high signal to noise ratio), high specificity (able to selectively detect the target among several similar targets), real time sensing, and in-site monitoring. This review summarizes the latest research in biosensing technologies for detection of Campylobacter spp. based on a variety of transducers and recognition elements. Finally, a comparison is made among all recently reported biosensors for the detection of Campylobacter spp.

High-performance surface acoustic wave immunosensing system on a PEG/aptamer hybridized surface

Label-free immunoassay systems have the advantages of procedural simplicity and a low construction cost of surfaces for immunosensing. When label-free immunoassay systems are considered, the nonspecific adsorption of unwanted materials should be eliminated unless it aids in the detection of error. PEG is well-known as a blocking agent for the prevention of the adsorption of nonspecific binding materials when coimmobilized with ligands for targets such as antibodies and oligonucleotides. The construction strategy for PEG/ligand coimmobilized surfaces is an important point in the preparation of a high-performance assays because the physiological condition of the ligand depends strongly on its interaction with the PEG chain. In this report, we investigate the interaction between thrombin and a thrombin-binding aptamer (TBA) on a PEG/TBA coimmobilized surface by using a shear horizontal surface acoustic wave (SAW) sensor. The thrombin-TBA binding property shows remarkable differences with changes in the PEG density and the distance from the gold surface to the aptamer.

Validation of a phase-mass characterization concept and interface for acoustic biosensors

Acoustic wave resonator techniques are widely used in in-liquid biochemical applications. The main challenges remaining are the improvement of sensitivity and limit of detection, as well as multianalysis capabilities and reliability. The sensitivity improvement issue has been addressed by increasing the sensor frequency, using different techniques such as high fundamental frequency quartz crystal microbalances (QCMs), surface generated acoustic waves (SGAWs) and film bulk acoustic resonators (FBARs). However, this sensitivity improvement has not been completely matched in terms of limit of detection. The decrease on frequency stability due to the increase of the phase noise, particularly in oscillators, has made it impossible to increase the resolution. A new concept of sensor characterization at constant frequency has been recently proposed based on the phase/mass sensitivity equation: Δφ/Δm ≈ −1/m_L, where m_L is the liquid mass perturbed by the resonator. The validation of the new concept is presented in this article. An immunosensor application for the detection of a low molecular weight pollutant, the insecticide carbaryl, has been chosen as a validation model.

Surface Nano-patterning of Polymers for Mass-Sensitive Biodetection

The crafting of sensor material of desired features has always remained a challenging task in the field of material designing and predominantly becomes more interesting when analyte belongs to biospecies. Label-free detection of different bioanalytes such as enzymes, viruses, microorganisms, and blood groups through mass-sensitive transducers has gained considerable importance in the development of modern biosensors. Analyte molecules interact with the surface of sensitive layer coated on these devices and as a result of this interaction, the frequency change is determined, which provides quantitative information about the mass of analyte. One of the most vital elements of these detection systems is to design selective sensor coatings through control surface structuring at nanoscale. Molecular imprinting has proven to be a highly suitable technique to generate selective surfaces that are capable of detecting different analytes, quantitatively and qualitatively as well. The tailor-made synthetic antibody cavities are rigid and stable, which are not immediately collapsed upon analyte interaction; moreover, the different bioanalytes do not undergo any phase change and maintain their original identity during analysis. This chapter will discuss the contribution of imprinting methods to design optimized surfaces for mass-sensitive detection of diverse biological species.

Surface generated acoustic wave biosensors for the detection of pathogens: a review

This review presents a deep insight into the Surface Generated Acoustic Wave (SGAW) technology for biosensing applications, based on more than 40 years of technological and scientific developments. In the last 20 years, SGAWs have been attracting the attention of the biochemical scientific community, due to the fact that some of these devices - Shear Horizontal Surface Acoustic Wave (SH-SAW), Surface Transverse Wave (STW), Love Wave (LW), Flexural Plate Wave (FPW), Shear Horizontal Acoustic Plate Mode (SH-APM) and Layered Guided Acoustic Plate Mode (LG-APM) - have demonstrated a high sensitivity in the detection of biorelevant molecules in liquid media. In addition, complementary efforts to improve the sensing films have been done during these years. All these developments have been made with the aim of achieving, in a future, a highly sensitive, low cost, small size, multi-channel, portable, reliable and commercially established SGAW biosensor. A setup with these features could significantly contribute to future developments in the health, food and environmental industries. The second purpose of this work is to describe the state-of-the-art of SGAW biosensors for the detection of pathogens, being this topic an issue of extremely importance for the human health. Finally, the review discuses the commercial availability, trends and future challenges of the SGAW biosensors for such applications.

An interleukin-6 ZnO/SiO(2)/Si surface acoustic wave biosensor

A novel high sensitivity ZnO/SiO(2)/Si Love mode surface acoustic wave (SAW) biosensor for the detection of interleukin-6 (IL-6), is reported. The biosensors operating at 747.7 MHz and 1.586 GHz were functionalized by immobilizing the monoclonal IL-6 antibody onto the ZnO biosensor surface both through direct surface adsorption and through covalent binding on gluteraldehyde. The morphology of the IL-6 antibody-protein complex was studied using scanning electron microscopy (SEM), and the mass of the IL-6 protein immobilized on the surface was measured from the frequency shift of the SAW resonator biosensor. The biosensor was shown to have extended linearity, which was observed to improve with higher sensor frequency and for IL-6 immobilization through the monoclonal antibody. Preliminary results of biosensor measurements of low levels of IL-6 in normal human serum are reported. The biosensor can be fully integrated with CMOS Si chips and developed as a portable real time detection system for the interleukin family of proteins in human serum.

Acoustic Wave (TSM) Biosensors: Weighing Bacteria

This chapter is focused on the development and use of acoustic wave biosensor platforms for the detection of bacteria, specifically those based on the thickness shear mode (TSM) resonator. We demonstrated the mechanical and electrical implications of bacterial positioning at the solid-liquid interface of a TSM biosensor and presented a model of the TSM with bacteria attached operating as coupled oscillators. The experiments and model provide an understanding of the nature of the signals produced by acoustic wave devices when they are used for testing bacteria. The paradox of “negative mass” could be a real threat to the interpretation of experimental results related to the detection of bacteria. The knowledge of the true nature of “negative mass” linked to the strength of bacteria attachment will contribute significantly to our understanding of the results of “weighing bacteria.” The results of this work can be used for bacterial detection and control of processes of bacterial settlement, bacterial colonization, biofilm formation, and bacterial infection in which bacterial attachment plays a role.

Phage immobilized magnetoelastic sensor for the detection of Salmonella typhimurium

In this article, a phage-based magnetoelastic sensor for the detection of Salmonella typhimurium is reported. Filamentous bacteriophage specific to S. typhimurium was used as a biorecognition element in order to ensure specific and selective binding of bacteria onto the sensor surface. Phage was immobilized onto the surface of the sensors by physical adsorption. The phage immobilized magnetoelastic sensors were exposed to S. typhimurium cultures with different concentrations ranging from 5x10(1) to 5x10(8) cfu/ml, and the corresponding changes in resonance frequency response of the sensor were studied. It was experimentally established that the sensitivity of the magnetoelastic sensors was higher for sensors with smaller physical dimensions. An increase in sensitivity from 159 Hz/decade for a 2 mm sensor to 770 Hz/decade for a 1 mm sensor was observed. Scanning electron microscopy (SEM) analysis of previously assayed biosensors provided visual verification of frequency changes that were caused by S. typhimurium binding to phage immobilized on the sensor surface. The detection limit on the order of 10(3) cfu/ml was obtained for a sensor with dimensions 1x0.2x0.015 mm.

Surface acoustic wave concentration of particle and bioparticle suspensions

A rapid particle concentration method in a sessile droplet has been developed using asymmetric surface acoustic wave (SAW) propagation on a substrate upon which the droplet is placed. Due to the asymmetry in the SAW propagation, azimuthal bulk liquid recirculation (acoustic streaming) is generated. Once the local particle concentration is sufficiently high within a particular streamline of the acoustic streaming convective flow, shear-induced migration gives rise to an inward radial force that concentrates the particles at the centre of the droplet. In this paper, a SAW device consists of a 0.75-mm thick, 127.68 degrees Y-X-axis-rotated cut, X-propagating LiNbO3 for a substrate and an interdigital transducer electrode (IDT) with 25 straight finger pairs in a simple repeating pattern, 12 mm aperture, and a wavelength of lambda=440 microm was patterned on the substrate. The IDT was then driven with a sinusoidal signal at the resonance frequency f0 of 8.611 MHz. To investigate the effect of particle type and size on the concentration process, three types of particles were used in this study, including fluorescent particles (1 microm), polystyrene microspheres (3, 6, 20, 45 microm), and living yeast cells (10-20 microm). Different RF powers were applied ranging from 120 to 510 mW. The concentration processes occurs within 2 to 20 s, depending on the particle size, type and input radio frequency (RF) power, much faster than currently available particle concentration mechanisms due to the large convective velocities achieved using the SAW device. Moreover, this concentration method is efficient, concentrating the particles into an aggregate one-tenth the size of the original droplet. Most importantly, bioparticles can also be concentrated by this method; we have verified that yeast cells are not lysed by the SAW radiation during concentration. By using the rapid concentration process described in this work, the breadth of applications and measurement sensitivity of SAW biosensor systems should be greatly enhanced.

A magnetoelastic resonance biosensor immobilized with polyclonal antibody for the detection of Salmonella typhimurium

Mass-sensitive, magnetoelastic resonance sensors have a characteristic resonant frequency that can be determined by monitoring the magnetic flux emitted by the sensor in response to an applied, time varying, magnetic field. This magnetostrictive platform has a unique advantage over conventional sensor platforms in that measurement is wireless and remote. A biosensor for the detection of Salmonella typhimurium was constructed by immobilizing a polyclonal antibody (the bio-molecular recognition element) onto the surface of a magnetostrictive platform. The biosensor was then exposed to solutions containing S. typhimurium bacteria. Binding between the antibody and antigen (bacteria) occurred and the additional mass of the bound bacteria caused a shift in the sensor's resonant frequency. Sensors with different physical dimensions were exposed to different concentrations of S. typhimurium ranging from 10(2) to 10(9)CFU/ml. Detection limits of 5x10(3) CFU/ml, 10(5) CFU/ml and 10(7) CFU/ml were obtained for sensors with the size of 2 mmx0.4 mmx15 microm, 5 mmx1 mmx15 microm and 25 mmx5 mmx15 microm, respectively. Good agreement between the measured number of bound bacterial cells (as measured by scanning electron microscopy (SEM)) and frequency shifts was obtained.

Detection of Escherichia coli O157:H7 with langasite pure shear horizontal surface acoustic wave sensors

The toxigenic Escherichia coli O157:H7 bacterium has been connected with hemorrhagic colitis and hemolytic uremic syndrome, which may be characterized by diarrhea, kidney failure and death. On average, O157:H7 causes 73,000 illnesses, 2100 hospitalizations and 60 deaths annually in the United States alone. There is the need for sensors capable of rapidly detecting dangerous microbes in food and water supplies to limit the exposure of human and animal populations. Previous work by the authors used shear horizontal surface acoustic wave (SH SAW) devices fabricated on langasite (LGS) Euler angles (0 degrees, 22 degrees, 90 degrees) to successfully detect macromolecular protein assemblies. The devices also demonstrated favorable temperature stability, biocompatibility and low attenuation in liquid environments, suggesting their applicability to bacterial detection. In this paper, a biosensor test setup utilizing a small volume fluid injection system, stable temperature control and high frequency phase measurement was applied to validate LGS SH SAW biosensors for bacterial detection. The LGS SH SAW delay lines were fabricated and derivatized with a rabbit polyclonal IgG antibody, which selectively binds to E. coli O157:H7, in this case a non-toxigenic test strain. To quantify the effect of non-specific binding (negative control), an antibody directed against the trinitrophenyl hapten (TNP) was used as a binding layer. Test E. coli bacteria were cultured, fixed with formaldehyde, stained with cell-permeant nucleic acid stain, suspended in phosphate buffered saline and applied to the antibody-coated sensing surfaces. The biosensor transmission coefficient phase was monitored using a network analyzer. Phase responses of about 14 degrees were measured for the E. coli detection, as compared to 2 degrees due to non-specific anti-TNP binding. A 30:1 preference for E. coli binding to the anti-O157:H7 layer when compared to the anti-TNP layer was observed with fluorescence microscopy, thus confirming the selectivity of the antibody surface to E. coli.

Screening of LPS-specific peptides from a phage display library using epoxy beads

The selection of identical or highly homologous peptides from phage display combinatorial peptide libraries has been unsuccessful in biopanning experiments using microtiter plates. In the present study, by biopanning on LPS-conjugated epoxy beads, we repeatedly enriched clones encoding AWLPWAK and NLQEFLF. These peptides were found to interact with the polysaccharide moiety of LPS, which is highly variable among gram negative bacterial species. In addition, phages encoding these peptides preferentially bound to the LPS of Salmonella family. AWLPWAK-conjugated beads absorbed Salmonella enteritidis from solution and showed a preference for S. enteritidis over Escherichia coli. In summary, this study shows for the first time that a peptide screened from phage displays of combinatorial peptide libraries can be synthesized on beads and be used practically to concentrate bacterial cells from solution.

Pure shear horizontal SAW biosensor on langasite

The undetected introduction of pathogens into food or water supplies can produce grave consequences in terms of economic loss and human suffering. Sensitive and selective sensors capable of quickly detecting microbial pathogens are urgently needed to limit the effects of bioterrorist incidents, accidents, or pollution. Shear horizontal surface acoustic wave (SH SAW) devices provide an attractive platform for the design of microbial biosensors that function in liquid media, where Rayleigh-type modes are rapidly attenuated. This paper reports on an exploratory SH SAW delay line designed and fabricated on langasite, La3Ga5SiO14 (LGS), along the novel Euler propagation direction (0 degrees, 22 degrees, 90 degrees). A liquid chamber was fabricated and attached to the top surface, and the device was submitted to liquid and biochemical tests. Moderate (6 dB) additional attenuation of the transmission coefficient, /S21/, was consistently observed when the SH SAW delay line was assembled in the test fixture and submitted to the liquid tests, indicating that LGS is an attractive candidate for liquid sensing. Sensor selectivity can be achieved by integrating the LGS SH SAW delay line with a biochemical recognition layer. A test setup was implemented for the characterization of LGS SH SAW-based biosensors. The delay line response to biomolecule binding was shown by detection of sequential binding of proteins to the SH SAW device delay path. The biotinylated sensor was exposed sequentially to biotin-binding deglycosylated avidin, biotin-modified rabbit IgG, and goat anti-rabbit IgG antibody. As each protein was bound to the sensing surface, marked changes in the delay-line phase were recorded. The reported results demonstrate the capability of these devices to act as biochemical detectors in aqueous solutions, and this work represents the first effort using the novel material LGS in SAW-based biosensor technology.

Biosensors for the detection of bacteria

This review will consider the role of biosensors towards the detection of infectious bacteria, although non-infectious ones will be considered where necessary. Recently, there has been a heightened interest in developing rapid and reliable methods of detection. This is especially true for detection of organisms involved in bioterrorism, food poisoning, and clinical problems such as antibiotic resistance. Biosensors can assist in achieving these goals, and sensors using several of the different types of transduction modes are discussed: electrochemical, high frequency (surface acoustic wave), and optical. The paper concludes with a discussion of three areas that may make a great impact in the next few years: integrated (lab-on-a-chip) systems, molecular beacons, and aptamers.

A novel fluorescent protein-based biosensor for gram-negative bacteria

Site-directed mutagenesis of enhanced green fluorescent protein (EGFP) based on rational computational design was performed to create a fluorescence-based biosensor for endotoxin and gram-negative bacteria. EGFP mutants (EGFP(i)) bearing one (G10) or two (G12) strands of endotoxin binding motifs were constructed and expressed in an Escherichia coli host. The EGFP(i) proteins were purified and tested for their efficacy as a novel fluorescent biosensor. After efficient removal of lipopolysaccharide from the E. coli lysates, the binding affinities of the EGFP(i) G10 and G12 to lipid A were established. The K(D) values of 7.16 x 10(-7) M for G10 and 8.15 x 10(-8) M for G12 were achieved. With high affinity being maintained over a wide range of pH and ionic strength, the binding of lipid A/lipopolysaccharide to the EGFP(i) biosensors could be measured as a concentration-dependent fluorescence quenching of the EGFP mutants. The EGFP(i) specifically tagged gram-negative bacteria like E. coli and Pseudomonas aeruginosa, as well as other gram-negative bacteria in contaminated water sampled from the environment. This dual function of the EGFP(i) in detecting both free endotoxin and live gram-negative bacteria forms the basis of the development of a novel fluorescent biosensor.