Purification and characterization of extracellular lipases from Ophiostoma piliferum

Agroindustrial Wastes as Alternative for Lipase Production by Candida viswanathii under Solid-State Cultivation: Purification, Biochemical Properties, and Its Potential for Poultry Fat Hydrolysis

The aims of this work were to establish improved conditions for lipase production by Candida viswanathii using agroindustrial wastes in solid-state cultivation and to purify and evaluate the application of this enzyme for poultry fat hydrolysis. Mixed wheat bran plus spent barley grain (1 : 1, w/w) supplemented with 25.0% (w/w) olive oil increased the lipase production to 322.4%, compared to the initial conditions. When olive oil was replaced by poultry fat, the highest lipase production found at 40% (w/w) was 31.43 U/gds. By selecting, yeast extract supplementation (3.5%, w/w), cultivation temperature (30°C), and substrate moisture (40%, w/v), lipase production reached 157.33 U/gds. Lipase was purified by hydrophobic interaction chromatography, presenting a molecular weight of 18.5 kDa as determined by SDS-PAGE. The crude and purified enzyme showed optimum activity at pH 5.0 and 50°C and at pH 5.5 and 45°C, respectively. The estimated half-life at 50°C was of 23.5 h for crude lipase and 6.7 h at 40°C for purified lipase. Lipase presented high activity and stability in many organic solvents. Poultry fat hydrolysis was maximum at pH 4.0, reaching initial hydrolysis rate of 33.17 mmol/L/min. Thus, C. viswanathii lipase can be successfully produced by an economic and sustainable process and advantageously applied for poultry fat hydrolysis without an additional acidification step to recover the released fatty acids.

Screening of microbes for novel acidic cutinases and cloning and expression of an acidic cutinase from Aspergillus niger CBS 513.88

Isolates from gardening waste compost and 38 culture collection microbes were grown on agar plates at pH 4.0 with the cutinase model substrate polycaprolactone as a carbon source. The strains showing polycaprolactone hydrolysis were cultivated in liquid at acidic pH and the cultivations were monitored by assaying the p-nitrophenyl butyrate esterase activities. Culture supernatants of four strains were analyzed for the hydrolysis of tritiated apple cutin at different pHs. Highest amounts of radioactive hydrolysis products were detected at pHs below 5. The hydrolysis of apple cutin by the culture supernatants at acidic pH was further confirmed by GC-MS analysis of the hydrolysis products. On the basis of screening, the acidic cutinase from Aspergillus niger CBS 513.88 was chosen for heterogeneous production in Pichia pastoris and for analysis of the effects of pH on activity and stability. The recombinant enzyme showed activity over a broad range of pHs with maximal activity between pH 5.0 and 6.5. Activity could be detected still at pH 3.5.

Cloning and expression of aMelanocarpus albomyces steryl esterase gene inPichia pastoris andTrichoderma reesei

The ste1 gene encoding a steryl esterase was isolated from the thermophilic fungus Melanocarpus albomyces. The gene has one intron, and it encodes a protein consisting of 576 amino acids. The deduced amino acid sequence of the steryl esterase was shown to be related to lipases and other esterases such as carboxylesterases. Formation of mature protein requires post-translational removal of a putative 18-amino-acid signal sequence and a 13-residue propeptide at the N-terminus. The intronless version of the Melanocarpus albomyces ste1 gene was expressed in Pichia pastoris under the inducible AOX1 promoter. The production level was low, and a large proportion of the total activity yield was found to be present intracellularly. However, the fact that steryl esterase activity was produced by P. pastoris cells carrying the expression cassette confirmed that the correct gene had been cloned. The ste1 gene was subsequently expressed in T. reesei under the inducible cbh1 promoter, and a clearly higher production level was obtained. About 60% of the total activity was bound to the fungal mycelium or to solid components of the culture medium, or existed as aggregates. Triton X-100 was successfully used to recover this activity. The heterologous production system in T. reesei provides a means of producing M. albomyces steryl esterase STE1 reliably in large scale for future studies.

Characterization of Melanocarpus albomyces steryl esterase produced in Trichoderma reesei and modification of fibre products with the enzyme

Melanocarpus albomyces steryl esterase STE1 is considered to be an interesting tool for several industrial applications due to its broad substrate specificity. STE1 was produced in the filamentous fungus Trichoderma reesei in a laboratory bioreactor at an estimated production level of 280 mg l(-l). The properties of the purified recombinant enzyme (rSTE1), such as substrate specificity, molecular mass, pH optimum and stability and thermostability, were characterized and compared to the corresponding properties of the native enzyme. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis showed one band with a molecular weight of 60 kDa for rSTE1, whereas analytical gel filtration showed a dimeric structure with a molecular weight of 120 kDa. The rSTE1 was somewhat less stable under different conditions and had slightly lower activities on various substrates than the native STE1. The effects of rSTE1 on the properties of paper sheets and polyethylene terephthalate (PET) fabric were preliminarily evaluated. Due to the hydrolysis of triglycerides and steryl esters by the rSTE1 treatment, the tensile strength and hydrophilicity of the paper were increased. The rSTE1 treatment increased significantly the polarity of PET by hydrolysing the ester bonds in the polyester backbone. Dyeing of PET with methylene blue was also slightly improved after rSTE1 treatment.

Production, purification, characterization, and applications of lipases

Lipases (triacylglycerol acylhydrolases, EC 3.1.1.3) catalyze the hydrolysis and the synthesis of esters formed from glycerol and long-chain fatty acids. Lipases occur widely in nature, but only microbial lipases are commercially significant. The many applications of lipases include speciality organic syntheses, hydrolysis of fats and oils, modification of fats, flavor enhancement in food processing, resolution of racemic mixtures, and chemical analyses. This article discusses the production, recovery, and use of microbial lipases. Issues of enzyme kinetics, thermostability, and bioactivity are addressed. Production of recombinant lipases is detailed. Immobilized preparations of lipases are discussed. In view of the increasing understanding of lipases and their many applications in high-value syntheses and as bulk enzymes, these enzymes are having an increasing impact on bioprocessing.

Production, isolation and characterization of a sterol esterase from Ophiostoma piceae

We studied extracellular sterol esterase production by the ascomycete Ophiostoma piceae in liquid culture. Esterase activity was found in low levels in glucose medium but it was strongly induced by olive oil. An esterase was purified from the 0.5% olive oil-supplemented cultures using ultrafiltration followed by a single chromatographic step on a hydrophobic interaction column. The enzyme was a glycoprotein with 8% N-linked carbohydrate content, a molecular mass by SDS/PAGE around 56.5 kDa and an isoelectric point of 3.3. Its N-terminal sequence was TTVNVKYPEGEVV. Substrate specificity studies showed that the O. piceae esterase hydrolyzes p-nitrophenol esters, tributyrin, triolein and different cholesterol esters. Both affinity (Km) and catalytic constant (k(cat)) were positively affected by the length of the fatty acid esterifying glycerol and cholesterol. The presence of double bonds in the acyl chain increased the enzyme efficiency, although it affected the k(cat) values rather than the Km on the cholesterol esters. The O. piceae enzyme showed no interfacial activation. This enzyme could have biotechnological applications in paper manufacturing since it efficiently hydrolyzes both triglycerides and sterol esters, which form pitch deposits during manufacturing of softwood and hardwood paper pulps, respectively.