Helix swapping between two alpha/beta barrels: crystal structure of phosphoenolpyruvate mutase with bound Mg(2+)-oxalate

Phosphoenolpyruvate mutase-catalyzed C-P bond formation: mechanistic ambiguities and opportunities

Phosphonates are produced across all domains of life and used widely in medicine and agriculture. Biosynthesis almost universally originates from the enzyme phosphoenolpyruvate mutase (Ppm), EC 5.4.2.9, which catalyzes O-P bond cleavage in phosphoenolpyruvate (PEP) and forms a high energy C-P bond in phosphonopyruvate (PnPy). Mechanistic scrutiny of this unusual intramolecular O-to-C phosphoryl transfer began with the discovery of Ppm in 1988 and concluded in 2008 with computational evidence supporting a concerted phosphoryl transfer via a dissociative metaphosphatelike transition state. This mechanism deviates from the standard 'in-line attack' paradigm for enzymatic phosphoryl transfer that typically involves a phosphoryl-enzyme intermediate, but definitive evidence is sparse. Here we review the experimental evidence leading to our current mechanistic understanding and highlight the roles of previously underappreciated conserved active site residues. We then identify remaining opportunities to evaluate overlooked residues and unexamined substrates/inhibitors.

3D domain swapping in the TIM barrel of the α subunit of Streptococcus pneumoniae tryptophan synthase

Tryptophan synthase catalyzes the last two steps of tryptophan biosynthesis in plants, fungi and bacteria. It consists of two protein chains, designated α and β, encoded by trpA and trpB genes, that function as an αββα complex. Structural and functional features of tryptophan synthase have been extensively studied, explaining the roles of individual residues in the two active sites in catalysis and allosteric regulation. TrpA serves as a model for protein-folding studies. In 1969, Jackson and Yanofsky observed that the typically monomeric TrpA forms a small population of dimers. Dimerization was postulated to take place through an exchange of structural elements of the monomeric chains, a phenomenon later termed 3D domain swapping. The structural details of the TrpA dimer have remained unknown. Here, the crystal structure of the Streptococcus pneumoniae TrpA homodimer is reported, demonstrating 3D domain swapping in a TIM-barrel fold for the first time. The N-terminal domain comprising the H0-S1-H1-S2 elements is exchanged, while the hinge region corresponds to loop L2 linking strand S2 to helix H2'. The structural elements S2 and L2 carry the catalytic residues Glu52 and Asp63. As the S2 element is part of the swapped domain, the architecture of the catalytic apparatus in the dimer is recreated from two protein chains. The homodimer interface overlaps with the α-β interface of the tryptophan synthase αββα heterotetramer, suggesting that the 3D domain-swapped dimer cannot form a complex with the β subunit. In the crystal, the dimers assemble into a decamer comprising two pentameric rings.

Genome-Wide Prediction and Analysis of 3D-Domain Swapped Proteins in the Human Genome from Sequence Information

3D-domain swapping is one of the mechanisms of protein oligomerization and the proteins exhibiting this phenomenon have many biological functions. These proteins, which undergo domain swapping, have acquired much attention owing to their involvement in human diseases, such as conformational diseases, amyloidosis, serpinopathies, proteionopathies etc. Early realisation of proteins in the whole human genome that retain tendency to domain swap will enable many aspects of disease control management. Predictive models were developed by using machine learning approaches with an average accuracy of 78% (85.6% of sensitivity, 87.5% of specificity and an MCC value of 0.72) to predict putative domain swapping in protein sequences. These models were applied to many complete genomes with special emphasis on the human genome. Nearly 44% of the protein sequences in the human genome were predicted positive for domain swapping. Enrichment analysis was performed on the positively predicted sequences from human genome for their domain distribution, disease association and functional importance based on Gene Ontology (GO). Enrichment analysis was also performed to infer a better understanding of the functional importance of these sequences. Finally, we developed hinge region prediction, in the given putative domain swapped sequence, by using important physicochemical properties of amino acids.

Probing the Catalytic Mechanism Involved in the Isocitrate Lyase Superfamily: Hybrid Quantum Mechanical/Molecular Mechanical Calculations on 2,3-Dimethylmalate Lyase

The isocitrate lyase (ICL) superfamily catalyzes the cleavage of the C(2)-C(3) bond of various α-hydroxy acid substrates. Members of the family are found in bacteria, fungi, and plants and include ICL itself, oxaloacetate hydrolase (OAH), 2-methylisocitrate lyase (MICL), and (2R,3S)-dimethylmalate lyase (DMML) among others. ICL and related targets have been the focus of recent studies to treat bacterial and fungal infections, including tuberculosis. The catalytic process by which this family achieves C(2)-C(3) bond breaking is still not clear. Extensive structural studies have been performed on this family, leading to a number of plausible proposals for the catalytic mechanism. In this paper, we have applied quantum mechanical/molecular mechanical (QM/MM) methods to the most recently reported family member, DMML, to assess whether any of the mechanistic proposals offers a clear energetic advantage over the others. Our results suggest that Arg161 is the general base in the reaction and Cys124 is the general acid, giving rise to a rate-determining barrier of approximately 10 kcal/mol.

Radical SAM enzyme QueE defines a new minimal core fold and metal-dependent mechanism

7-carboxy-7-deazaguanine synthase (QueE) catalyzes a key S-adenosyl-L-methionine (AdoMet)- and Mg(2+)-dependent radical-mediated ring contraction step, which is common to the biosynthetic pathways of all deazapurine-containing compounds. QueE is a member of the AdoMet radical superfamily, which employs the 5'-deoxyadenosyl radical from reductive cleavage of AdoMet to initiate chemistry. To provide a mechanistic rationale for this elaborate transformation, we present the crystal structure of a QueE along with structures of pre- and post-turnover states. We find that substrate binds perpendicular to the [4Fe-4S]-bound AdoMet, exposing its C6 hydrogen atom for abstraction and generating the binding site for Mg(2+), which coordinates directly to the substrate. The Burkholderia multivorans structure reported here varies from all other previously characterized members of the AdoMet radical superfamily in that it contains a hypermodified (β6/α3) protein core and an expanded cluster-binding motif, CX14CX2C.

Analysis of domain-swapped oligomers reveals local sequence preferences and structural imprints at the linker regions and swapped interfaces

BACKGROUND

3D domain swapping is an oligomerization process in which structural elements get exchanged between subunits. This mechanism grasped interest of many researchers due to its association with neurodegenerative diseases like Alzheimer's disease, spongiform encephalopathy etc. Despite the biomedical relevance, very little is known about understanding this mechanism. The quest for ruling principles behind this curious phenomenon that could enable early prediction provided an impetus for our bioinformatics studies.

METHODOLOGY

A novel method, HIDE, has been developed to find non-domain-swapped homologues and to identify hinge from domain-swapped oligomers. Non-domain-swapped homologues were identified from the protein structural databank for majority of the domain-swapped entries and hinge boundaries could be recognised automatically by means of successive superposition techniques. Different sequence and structural features in domain-swapped proteins and related proteins have also been analysed.

CONCLUSIONS

The HIDE algorithm was able to identify hinge region in 83% cases. Sequence and structural analyses of hinge and interfaces reveal amino acid preferences and specific conformations of residues at hinge regions, while comparing the domain-swapped and non-domain-swapped states. Interactions differ significantly between regular dimeric interfaces and interface formed at the site of domain-swapped examples. Such preferences of residues, conformations and interactions could be of predictive value.

Structure of oxalacetate acetylhydrolase, a virulence factor of the chestnut blight fungus

Oxalacetate acetylhydrolase (OAH), a member of the phosphoenolpyruvate mutase/isocitrate lyase superfamily, catalyzes the hydrolysis of oxalacetate to oxalic acid and acetate. This study shows that knock-out of the oah gene in Cryphonectria parasitica, the chestnut blight fungus, reduces the ability of the fungus to form cankers on chestnut trees, suggesting that OAH plays a key role in virulence. OAH was produced in Escherichia coli and purified, and its catalytic rates were determined. Oxalacetate is the main OAH substrate, but the enzyme also acts as a lyase of (2R,3S)-dimethyl malate with approximately 1000-fold lower efficacy. The crystal structure of OAH was determined alone, in complex with a mechanism-based inhibitor, 3,3-difluorooxalacetate (DFOA), and in complex with the reaction product, oxalate, to a resolution limit of 1.30, 1.55, and 1.65 A, respectively. OAH assembles into a dimer of dimers with each subunit exhibiting an (alpha/beta)(8) barrel fold and each pair swapping the 8th alpha-helix. An active site "gating loop" exhibits conformational disorder in the ligand-free structure. To obtain the structures of the OAH.ligand complexes, the ligand-free OAH crystals were soaked briefly with DFOA or oxalacetate. DFOA binding leads to ordering of the gating loop in a conformation that sequesters the ligand from the solvent. DFOA binds in a gem-diol form analogous to the oxalacetate intermediate/transition state. Oxalate binds in a planar conformation, but the gating loop is largely disordered. Comparison between the OAH structure and that of the closely related enzyme, 2,3-dimethylmalate lyase, suggests potential determinants of substrate preference.

The crystal structure of the Escherichia coli autoinducer-2 processing protein LsrF

Many bacteria produce and respond to the quorum sensing signal autoinducer-2 (AI-2). Escherichia coli and Salmonella typhimurium are among the species with the lsr operon, an operon containing AI-2 transport and processing genes that are up regulated in response to AI-2. One of the Lsr proteins, LsrF, has been implicated in processing the phosphorylated form of AI-2. Here, we present the structure of LsrF, unliganded and in complex with two phospho-AI-2 analogues, ribose-5-phosphate and ribulose-5-phosphate. The crystal structure shows that LsrF is a decamer of (alphabeta)(8)-barrels that exhibit a previously unseen N-terminal domain swap and have high structural homology with aldolases that process phosphorylated sugars. Ligand binding sites and key catalytic residues are structurally conserved, strongly implicating LsrF as a class I aldolase.

Biosynthesis of phosphonic and phosphinic acid natural products

Natural products containing carbon-phosphorus bonds (phosphonic and phosphinic acids) have found widespread use in medicine and agriculture. Recent years have seen a renewed interest in the biochemistry and biology of these compounds with the cloning of the biosynthetic gene clusters for several family members. This review discusses the commonalities and differences in the molecular logic that lie behind the biosynthesis of these compounds. The current knowledge regarding the metabolic pathways and enzymes involved in the production of a number of natural products, including the approved antibiotic fosfomycin, the widely used herbicide phosphinothricin (PT), and the clinical candidate for treatment of malaria FR-900098, is presented. Many of the enzymes involved in the biosynthesis of these compounds catalyze chemically and biologically unprecedented transformations, and a wealth of new biochemistry has been revealed through their study. These investigations have also suggested new strategies for natural product discovery.

Structure and function of 2,3-dimethylmalate lyase, a PEP mutase/isocitrate lyase superfamily member

The Aspergillus niger genome contains four genes that encode proteins exhibiting greater than 30% amino acid sequence identity to the confirmed oxaloacetate acetyl hydrolase (OAH), an enzyme that belongs to the phosphoenolpyruvate mutase/isocitrate lyase superfamily. Previous studies have shown that a mutant A. niger strain lacking the OAH gene does not produce oxalate. To identify the function of the protein sharing the highest amino acid sequence identity with the OAH (An07g08390, Swiss-Prot entry Q2L887, 57% identity), we produced the protein in Escherichia coli and purified it for structural and functional studies. A focused substrate screen was used to determine the catalytic function of An07g08390 as (2R,3S)-dimethylmalate lyase (DMML): k(cat)=19.2 s(-1) and K(m)=220 microM. DMML also possesses significant OAH activity (k(cat)=0.5 s(-1) and K(m) =220 microM). DNA array analysis showed that unlike the A. niger oah gene, the DMML encoding gene is subject to catabolite repression. DMML is a key enzyme in bacterial nicotinate catabolism, catalyzing the last of nine enzymatic steps. This pathway does not have a known fungal counterpart. BLAST analysis of the A. niger genome for the presence of a similar pathway revealed the presence of homologs to only some of the pathway enzymes. This and the finding that A. niger does not thrive on nicotinamide as a sole carbon source suggest that the fungal DMML functions in a presently unknown metabolic pathway. The crystal structure of A. niger DMML (in complex with Mg(2+) and in complex with Mg(2+) and a substrate analog: the gem-diol of 3,3-difluoro-oxaloacetate) was determined for the purpose of identifying structural determinants of substrate recognition and catalysis. Structure-guided site-directed mutants were prepared and evaluated to test the contributions made by key active-site residues. In this article, we report the results in the broader context of the lyase branch of the phosphoenolpyruvate mutase/isocitrate lyase superfamily to provide insight into the evolution of functional diversity.

Crystal structure of DFA0005 complexed with alpha-ketoglutarate: a novel member of the ICL/PEPM superfamily from alkali-tolerant Deinococcus ficus

The crystal structure of the DFA0005 protein complexed with alpha-ketoglutarate (AKG) from an alkali-tolerant bacterium Deinococcus ficus has been determined to a resolution of 1.62 A. The monomer forms an incomplete alpha7/beta8 barrel with a protruding alpha8 helix that interacts extensively with another subunit to form a stable dimer of two complete alpha8/beta8 barrels. The dimer is further stabilized by four glycerol molecules situated at the interface. One unique AKG ligand binding pocket per subunit is detected. Fold match using the DALI and SSE servers identifies DFA0005 as belonging to the isocitrate lyase/phosphoenolpyruvate mutase (ICL/PEPM) superfamily. However, further detailed structural and sequence comparison with other members in this superfamily and with other families containing AKG ligand indicate that DFA0005 protein exhibits considerable distinguishing features of its own and can be considered a novel member in this ICL/PEPM superfamily.

Ab initio QM/MM studies of the phosphoryl transfer reaction catalyzed by PEP mutase suggest a dissociative metaphosphate transition state

The interconversion between phosphoenolpyruvate (PEP) and phosphonopyruvate (P-pyr) catalyzed by PEP mutase is investigated using an ab initio QM/MM method with the QM region treated at the B3LYP/6-31G* level of theory. Two-dimensional minimum energy path calculations were carried out for both the wild-type enzyme and the N122A mutant. The calculations suggest a dissociative transition state featuring metaphosphate and Mg(2+)-coordinating pyruvate enolate, stabilized by an extensive hydrogen bond network involving Asn122, Ser123, Arg159, His190, Ser46, and Leu48. It is also found that a substantial conformational change in the pyruvyl group is required for the interconversion.

Structure and function of PA4872 from Pseudomonas aeruginosa, a novel class of oxaloacetate decarboxylase from the PEP mutase/isocitrate lyase superfamily

Pseudomonas aeruginosa PA4872 was identified by sequence analysis as a structurally and functionally novel member of the PEP mutase/isocitrate lyase superfamily and therefore targeted for investigation. Substrate screens ruled out overlap with known catalytic functions of superfamily members. The crystal structure of PA4872 in complex with oxalate (a stable analogue of the shared family alpha-oxyanion carboxylate intermediate/transition state) and Mg2+ was determined at 1.9 A resolution. As with other PEP mutase/isocitrate lyase superfamily members, the protein assembles into a dimer of dimers with each subunit adopting an alpha/beta barrel fold and two subunits swapping their barrel's C-terminal alpha-helices. Mg2+ and oxalate bind in the same manner as observed with other superfamily members. The active site gating loop, known to play a catalytic role in the PEP mutase and lyase branches of the superfamily, adopts an open conformation. The Nepsilon of His235, an invariant residue in the PA4872 sequence family, is oriented toward a C(2) oxygen of oxalate analogous to the C(3) of a pyruvyl moiety. Deuterium exchange into alpha-oxocarboxylate-containing compounds was confirmed by 1H NMR spectroscopy. Having ruled out known activities, the involvement of a pyruvate enolate intermediate suggested a decarboxylase activity of an alpha-oxocarboxylate substrate. Enzymatic assays led to the discovery that PA4872 decarboxylates oxaloacetate (kcat = 7500 s(-1) and Km = 2.2 mM) and 3-methyloxaloacetate (kcat = 250 s(-1) and Km = 0.63 mM). Genome context of the fourteen sequence family members indicates that the enzyme is used by select group of Gram-negative bacteria to maintain cellular concentrations of bicarbonate and pyruvate; however the decarboxylation activity cannot be attributed to a pathway common to the various bacterial species.

Oxaloacetate hydrolase, the C-C bond lyase of oxalate secreting fungi

Oxalate secretion by fungi is known to be associated with fungal pathogenesis. In addition, oxalate toxicity is a concern for the commercial application of fungi in the food and drug industries. Although oxalate is generated through several different biochemical pathways, oxaloacetate acetylhydrolase (OAH)-catalyzed hydrolytic cleavage of oxaloacetate appears to be an especially important route. Below, we report the cloning of the Botrytis cinerea oahA gene and the demonstration that the disruption of this gene results in the loss of oxalate formation. In addition, through complementation we have shown that the intact B. cinerea oahA gene restores oxalate production in an Aspergillus niger mutant strain, lacking a functional oahA gene. These observations clearly indicate that oxalate production in A. niger and B. cinerea is solely dependent on the hydrolytic cleavage of oxaloacetate catalyzed by OAH. In addition, the B. cinera oahA gene was overexpressed in Escherichia coli and the purified OAH was used to define catalytic efficiency, substrate specificity, and metal ion activation. These results are reported along with the discovery of the mechanism-based, tight binding OAH inhibitor 3,3-difluorooxaloacetate (K(i) = 68 nM). Finally, we propose that cellular uptake of this inhibitor could reduce oxalate production.

Theoretical Studies of Dissociative Phosphoryl Transfer in Interconversion of Phosphoenolpyruvate to Phosphonopyruvate: Solvent Effects, Thio Effects, and Implications for Enzymatic Reactions

The conversion of phosphoenolpyruvate (PEP) to phosphonopyruvate (P-pyr) is catalyzed by PEP mutase via a dissociative mechanism. In this work, we investigate the uncatalyzed reaction using ab initio methods, density functional theory, and the semiempirical MNDO/d method. Comparisons of geometries and relative energies of stationary points (minima and transition states) with density functional results indicate that the semiempirical method is reasonably accurate. Solvent effects are examined using implicit solvent models, including the recently extended smooth conductor-like screening model. Due to the large negative charge carried by the system, solvation is found to drastically alter the location and energy of stationary points along the dissociative reaction pathways. The influence of substituting a nonbridging phosphoryl oxygen by sulfur (thio effects) was also investigated. Implications of these results for the enzymatic reaction are discussed.

Comparison of backbone dynamics of monomeric and domain-swapped stefin A

Three-dimensional domain swapping has been observed in increasing number of proteins and has been implicated in the initial stages of protein aggregation, including that of the cystatins. Stefin A folds as a monomer under native conditions, while under some denaturing conditions domain-swapped dimer is formed. We have determined the backbone dynamics of the monomeric and domain-swapped dimeric forms of stefin A by (15)N relaxation using a model-free approach. The overall correlation times of the molecules were determined to be 4.6 +/- 0.1 ns and 9.2 +/- 0.2 ns for the monomer and the dimer, respectively. In the monomer, decreased order parameters indicate an increased mobility for the N-terminal trunk, the first and the second binding loops. At the opposite side of the molecule, the loop connecting the alpha-helix with strand B, the beginning of strand B and the loop connecting strands C and D show increased localized mobility. In the domain-swapped dimer, a distinctive feature of the structure is the concatenation of strands B and C into a single long beta-strand. The newly formed linker region between strands B and C, which substitutes for the first binding loop in the monomer, has order parameters typical for the remainder of the beta-strands. Thus, the interaction between subunits that occurs on domain-swapping has consequences for the dynamics of the protein at long-range from the site of conformational change, where an increased rigidity in the newly formed linker region is accompanied by an increased mobility of loops remote from that site.

Crystal structure of Salmonella typhimurium 2-methylisocitrate lyase (PrpB) and its complex with pyruvate and Mg2+

Propionate metabolism in Salmonella typhimurium occurs via 2-methylcitric acid cycle. The last step of this cycle, the cleavage of 2-methylisocitrate to succinate and pyruvate, is catalysed by 2-methylisocitrate lyase (PrpB). Here we report the X-ray crystal structure of the native and the pyruvate/Mg(2+) bound PrpB from S. typhimurium, determined at 2.1 and 2.3A, respectively. The structure closely resembles that of the Escherichia coli enzyme. Unlike the E. coli PrpB, Mg(2+) could not be located in the native Salmonella PrpB. Only in pyruvate bound PrpB structure, Mg(2+) was found coordinated with pyruvate. Binding of pyruvate to PrpB seems to induce movement of the Mg(2+) by 2.5A from its position found in E. coli native PrpB. In both the native enzyme and pyruvate/Mg(2+) bound forms, the active site loop is completely disordered. Examination of the pocket in which pyruvate and glyoxalate bind to 2-methylisocitrate lyase and isocitrate lyase, respectively, reveals plausible rationale for different substrate specificities of these two enzymes. Structural similarities in substrate and metal atom binding site as well as presence of similar residues in the active site suggest possible similarities in the reaction mechanism.

Catalysing new reactions during evolution: economy of residues and mechanism

The diversity of function in some enzyme superfamilies shows that during evolution, enzymes have evolved to catalyse different reactions on the same structure scaffold. In this analysis, we examine in detail how enzymes can modify their chemistry, through a comparison of the catalytic residues and mechanisms in 27 pairs of homologous enzymes of totally different functions. We find that evolution is very economical. Enzymes retain structurally conserved residues to aid catalysis, including residues that bind catalytic metal ions and modulate cofactor chemistry. We examine the conservation of residue type and residue function in these structurally conserved residue pairs. Additionally, enzymes often retain common mechanistic steps catalyzed by structurally conserved residues. We have examined these steps in the context of their overall reactions.

Structure of E. coli ketopantoate hydroxymethyl transferase complexed with ketopantoate and Mg2+, solved by locating 160 selenomethionine sites

We report the crystal structure of E. coli ketopantoate hydroxymethyltransferase (KPHMT) at 1.9 A resolution, in complex with its product, ketopantoate. KPHMT catalyzes the first step in the biosynthesis of pantothenate (vitamin B(5)), the precursor of coenzyme A and the acyl carrier protein cofactor. The structure of the decameric enzyme was solved by multiwavelength anomalous dispersion to locate 160 selenomethionine sites and phase 560 kDa of protein, making it the largest structure solved by this approach. KPHMT adopts the (betaalpha)(8) barrel fold and is a member of the phosphoenolpyruvate/pyruvate superfamily. The active site contains a ketopantoate bidentately coordinated to Mg(2+). Similar binding is likely for the substrate, alpha-ketoisovalerate, orienting the C3 for deprotonation.

Residues C123 and D58 of the 2-methylisocitrate lyase (PrpB) enzyme of Salmonella enterica are essential for catalysis

The prpB gene of Salmonella enterica serovar Typhimurium LT2 encodes a protein with 2-methylisocitrate (2-MIC) lyase activity, which cleaves 2-MIC into pyruvate and succinate during the conversion of propionate to pyruvate via the 2-methylcitric acid cycle. This paper reports the isolation and kinetic characterization of wild-type and five mutant PrpB proteins. Wild-type PrpB protein had a molecular mass of approximately 32 kDa per subunit, and the biologically active enzyme was comprised of four subunits. Optimal 2-MIC lyase activity was measured at pH 7.5 and 50 degrees C, and the reaction required Mg(2+) ions; equimolar concentrations of Mn(2+) ions were a poor substitute for Mg(2+) (28% specific activity). Dithiothreitol (DTT) or reduced glutathione (GSH) was required for optimal activity; the role of DTT or GSH was apparently not to reduce disulfide bonds, since the disulfide-specific reducing agent Tris(2-carboxyethyl)phosphine hydrochloride failed to substitute for DTT or GSH. The K(m) of PrpB for 2-MIC was measured at 19 micro M, with a k(cat) of 105 s(-1). Mutations in the prpB gene were introduced by site-directed mutagenesis based on the active-site residues deemed important for catalysis in the closely related phosphoenolpyruvate mutase and isocitrate lyase enzymes. Residues D58, K121, C123, and H125 of PrpB were changed to alanine, and residue R122 was changed to lysine. Nondenaturing polyacrylamide gel electrophoresis indicated that all mutant PrpB proteins retained the same oligomeric state of the wild-type enzyme, which is known to form tetramers. The PrpB(K121A), PrpB(H125A), and PrpB(R122K) mutant proteins formed enzymes that had 1,050-, 750-, and 2-fold decreases in k(cat) for 2-MIC lyase activity, respectively. The PrpB(D58A) and PrpB(C123A) proteins formed tetramers that displayed no detectable 2-MIC lyase activity indicating that both of these residues are essential for catalysis. Based on the proposed mechanism of the closely related isocitrate lyases, PrpB residue C123 is proposed to serve as the active site base, and residue D58 is critical for the coordination of a required Mg(2+) ion.

Comparative analysis of the Escherichia coli ketopantoate hydroxymethyltransferase crystal structure confirms that it is a member of the (betaalpha)8 phosphoenolpyruvate/pyruvate superfamily

Escherichia coli ketopantoate hydroxymethyltransferase (KPHMT) catalyzes the first step in the biosynthesis pathway of pantothenate (vitamin B(5)), the transfer of a hydroxymethyl group onto alpha-ketoisovalerate. Here we describe a detailed comparative analysis of the KPHMT crystal structure and the identification of structural homologues, some of which have remarkable similarities in their active sites, modes of binding to substrates, and mechanisms. We show that KPHMT forms a family within the phosphoenolpyruvate/pyruvate superfamily. Based on the analysis, we propose that in this superfamily there should be a subdivision into two groups. This paper completes our structural analysis of the E. coli enzymes in the pantothenate pathway.

The crystal structure of the first enzyme in the pantothenate biosynthetic pathway, ketopantoate hydroxymethyltransferase, from M tuberculosis

Ketopantoate hydroxymethyltransferase (KPHMT) catalyzes the first committed step in the biosynthesis of pantothenate, which is a precursor to coenzyme A and is required for penicillin biosynthesis. The crystal structure of KPHMT from Mycobacterium tuberculosis was determined by the single anomalous substitution (SAS) method at 2.8 A resolution. KPHMT adopts a structure that is a variation on the (beta/alpha) barrel fold, with a metal binding site proximal to the presumed catalytic site. The protein forms a decameric complex, with subunits in opposing pentameric rings held together by a swapping of their C-terminal alpha helices. The structure reveals KPHMT's membership in a small, recently discovered group of (beta/alpha) barrel enzymes that employ domain swapping to form a variety of oligomeric assemblies. The apparent conservation of certain detailed structural characteristics suggests that KPHMT is distantly related by divergent evolution to enzymes in unrelated pathways, including isocitrate lyase and phosphoenolpyruvate mutase.

The purification and characterization of phosphonopyruvate hydrolase, a novel carbon-phosphorus bond cleavage enzyme from Variovorax sp Pal2

Phosphonopyruvate hydrolase, a novel bacterial carbon-phosphorus bond cleavage enzyme, was purified to homogeneity by a series of chromatographic steps from cell extracts of a newly isolated environmental strain of Variovorax sp. Pal2. The enzyme was inducible in the presence of phosphonoalanine or phosphonopyruvate; unusually, its expression was independent of the phosphate status of the cell. The native enzyme had a molecular mass of 63 kDa with a subunit mass of 31.2 kDa. Activity of purified phosphonopyruvate hydrolase was Co2+-dependent and showed a pH optimum of 6.7-7.0. The enzyme had a Km of 0.53 mm for its sole substrate, phosphonopyruvate, and was inhibited by the analogues phosphonoformic acid, 3-phosphonopropionic acid, and hydroxymethylphosphonic acid. The nucleotide sequence of the phosphonopyruvate hydrolase structural gene indicated that it is a member of the phosphoenolpyruvate phosphomutase/isocitrate lyase superfamily with 41% identity at the amino acid level to the carbon-to-phosphorus bond-forming enzyme phosphoenolpyruvate phosphomutase from Tetrahymena pyriformis. Thus its apparently ancient evolutionary origins differ from those of each of the two carbon-phosphorus hydrolases that have been reported previously; phosphonoacetaldehyde hydrolase is a member of the haloacetate dehalogenase family, whereas phosphonoacetate hydrolase belongs to the alkaline phosphatase superfamily of zinc-dependent hydrolases. Phosphonopyruvate hydrolase is likely to be of considerable significance in global phosphorus cycling, because phosphonopyruvate is known to be a key intermediate in the formation of all naturally occurring compounds that contain the carbon-phosphorus bond.

Properties of phosphoenolpyruvate mutase, the first enzyme in the aminoethylphosphonate biosynthetic pathway in Trypanosoma cruzi

Phosphoenolpyruvate (PEP) mutase catalyzes the conversion of phosphoenolpyruvate to phosphonopyruvate, the initial step in the formation of many naturally occurring phosphonate compounds. The phosphonate compound 2-aminoethylphosphonate is present as a component of complex carbohydrates on the surface membrane of many trypanosomatids including glycosylinositolphospholipids of Trypanosoma cruzi. Using partial sequence information from the T. cruzi genome project we have isolated a full-length gene with significant homology to PEP mutase from the free-living protozoan Tetrahymena pyriformis and the edible mussel Mytilus edulis. Recombinant expression in Escherichia coli confirms that it encodes a functional PEP mutase with a Km apparent of 8 microM for phosphonopyruvate and a kcat of 12 s-1. The native enzyme is a homotetramer with an absolute requirement for divalent metal ions and displays negative cooperativity for Mg2+ (S0.5 0.4 microM; n = 0.46). Immunofluorescence and sub-cellular fractionation indicates that PEP mutase has a dual localization in the cell. Further evidence to support this was obtained by Western analysis of a partial sub-cellular fractionation of T. cruzi cells. Southern and Western analysis suggests that PEP mutase is unique to T. cruzi and is not present in the other medically important parasites, Trypanosoma brucei and Leishmania spp.

Crystal structure of 2-methylisocitrate lyase (PrpB) from Escherichia coli and modelling of its ligand bound active centre

Following acetate, propionate is the second most abundant low molecular mass carbon compound found in soil. Many microorganisms, including most, if not all fungi, as well as several aerobic bacteria, such as Escherichia coli and Salmonella enterica oxidize propionate via the methylcitrate cycle. The enzyme 2-methylisocitrate lyase (PrpB) from Escherichia coli catalysing the last step of this cycle, the cleavage of 2-methylisocitrate to pyruvate and succinate, was crystallised and its structure determined to a resolution of 1.9A. The enzyme, which strictly depends on Mg(2+) for catalysis, belongs to the isocitrate lyase protein family. A common feature of members of this enzyme family is the movement of a so-called "active site loop" from an open into a closed conformation upon substrate binding thus shielding the reactants from the surrounding solvent. Since in the presented structure, PrpB contains, apart from a Mg(2+), no ligand, the active site loop is found in an open conformation. This conformation, however, differs significantly from the open conformation present in the so far known structures of ligand-free isocitrate lyases. A possible impact of this observation with respect to the different responses of isocitrate lyases and PrpB upon treatment with the common inhibitor 3-bromopyruvate is discussed. Based on the structure of ligand-bound isocitrate lyase from Mycobacterium tuberculosis a model of the substrate-bound PrpB enzyme in its closed conformation was created which provides hints towards the substrate specificity of this enzyme.

3D domain swapping: as domains continue to swap

Three-dimensional (3D) domain swapping creates a bond between two or more protein molecules as they exchange their identical domains. Since the term '3D domain swapping' was first used to describe the dimeric structure of diphtheria toxin, the database of domain-swapped proteins has greatly expanded. Analyses of the now about 40 structurally characterized cases of domain-swapped proteins reveal that most swapped domains are at either the N or C terminus and that the swapped domains are diverse in their primary and secondary structures. In addition to tabulating domain-swapped proteins, we describe in detail several examples of 3D domain swapping which show the swapping of more than one domain in a protein, the structural evidence for 3D domain swapping in amyloid proteins, and the flexibility of hinge loops. We also discuss the physiological relevance of 3D domain swapping and a possible mechanism for 3D domain swapping. The present state of knowledge leads us to suggest that 3D domain swapping can occur under appropriate conditions in any protein with an unconstrained terminus. As domains continue to swap, this review attempts not only a summary of the known domain-swapped proteins, but also a framework for understanding future findings of 3D domain swapping.

Crystal structure of decameric fructose-6-phosphate aldolase from Escherichia coli reveals inter-subunit helix swapping as a structural basis for assembly differences in the transaldolase family

Fructose-6-phosphate aldolase from Escherichia coli is a member of a small enzyme subfamily (MipB/TalC family) that belongs to the class I aldolases. The three-dimensional structure of this enzyme has been determined at 1.93 A resolution by single isomorphous replacement and tenfold non-crystallographic symmetry averaging and refined to an R-factor of 19.9% (R(free) 21.3%). The subunit folds into an alpha/beta barrel, with the catalytic lysine residue on barrel strand beta 4. It is very similar in overall structure to that of bacterial and mammalian transaldolases, although more compact due to extensive deletions of additional secondary structural elements. The enzyme forms a decamer of identical subunits with point group symmetry 52. Five subunits are arranged as a pentamer, and two ring-like pentamers pack like a doughnut to form the decamer. A major interaction within the pentamer is through the C-terminal helix from one monomer, which runs across the active site of the neighbouring subunit. In classical transaldolases, this helix folds back and covers the active site of the same subunit and is involved in dimer formation. The inter-subunit helix swapping appears to be a major determinant for the formation of pentamers rather than dimers while at the same time preserving importing interactions of this helix with the active site of the enzyme. The active site lysine residue is covalently modified, by forming a carbinolamine with glyceraldehyde from the crystallisation mixture. The catalytic machinery is very similar to that of transaldolase, which together with the overall structural similarity suggests that enzymes of the MipB/TALC subfamily are evolutionary related to the transaldolase family.

Mechanism-based inhibition of enzyme I of the Escherichia coli phosphotransferase system. Cysteine 502 is an essential residue

Four phosphoenolpyruvate (PEP) derivatives, carrying reactive or activable chemical functions in each of the three chemical regions of PEP, were assayed as alternative substrates of enzyme I (EI) of the Escherichia coli PEP:glucose phosphotransferase system. The Z- and E-isomers of 3-chlorophosphoenolpyruvate (3-Cl-PEP) were substrates, presenting K(m) values of 0.08 and 0.12 mm, respectively, very similar to the K(m) of 0.14 mm measured for PEP, and k(cat) of 40 and 4 min(-1), compared with 2,200 min(-1), for PEP. The low catalytic efficiency of these substrates permits the study of activity at in vivo EI concentrations. Z-Cl-PEP was a competitive inhibitor of PEP with a K(I) of 0.4 mm. E-Cl-PEP was not an inhibitor. Compounds 3 and 4, obtained by modification of the carboxylic and phosphate groups of PEP, were neither substrates nor inhibitors of EI, highlighting the importance of these functionalities for recognition by EI. Z-Cl-PEP is a suicide inhibitor. About 10-50 turnovers sufficed to inactivate EI completely. Such a property can be exploited to reveal and quantitate phosphoryl transfer from EI to other proteins at in vivo concentrations. Inactivation was saturatable in Z-Cl-PEP, with an apparent K(m)(inact) of 0.2-0.4 mm. The rate of inactivation increased with the concentration of EI, indicating a preferential or exclusive reaction with the dimeric form of EI. E-Cl-PEP inactivates EI much more slowly, and unlike PEP, it did not protect against inactivation by Z-Cl-PEP. This and the ineffectiveness of E-Cl-PEP as a competitive inhibitor have been related to the presence of two EI active species. Cys-502 of EI was identified by mass spectrometry as the reacting residue. The C502A EI mutant showed less than 0.06% wild-type activity. Sequence alignments and comparisons of x-ray structures of different PEP-utilizing enzymes indicate that Cys-502 might serve as a proton donor during catalysis.

Crystal structures of the metal-dependent 2-dehydro-3-deoxy-galactarate aldolase suggest a novel reaction mechanism

Carbon-carbon bond formation is an essential reaction in organic chemistry and the use of aldolase enzymes for the stereochemical control of such reactions is an attractive alternative to conventional chemical methods. Here we describe the crystal structures of a novel class II enzyme, 2-dehydro-3-deoxy-galactarate (DDG) aldolase from Escherichia coli, in the presence and absence of substrate. The crystal structure was determined by locating only four Se sites to obtain phases for 506 protein residues. The protomer displays a modified (alpha/beta)(8) barrel fold, in which the eighth alpha-helix points away from the beta-barrel instead of packing against it. Analysis of the DDG aldolase crystal structures suggests a novel aldolase mechanism in which a phosphate anion accepts the proton from the methyl group of pyruvate.

The crystal structure and active site location of isocitrate lyase from the fungus Aspergillus nidulans

BACKGROUND

Isocitrate lyase catalyses the first committed step of the carbon-conserving glyoxylate bypass, the Mg(2+)-dependent reversible cleavage of isocitrate into succinate and glyoxylate. This metabolic pathway is an inviting target for the control of a number of diseases, because the enzymes involved in this cycle have been identified in many pathogens including Mycobacterium leprae and Leishmania.

RESULTS

As part of a programme of rational drug design the structure of the tetrameric Aspergillus nidulans isocitrate lyase and its complex with glyoxylate and a divalent cation have been solved to 2.8 A resolution using X-ray diffraction. Each subunit comprises two domains, one of which adopts a folding pattern highly reminiscent of the triose phosphate isomerase (TIM) barrel. A 'knot' between subunits observed in the three-dimensional structure, involving residues towards the C terminus, implies that tetramer assembly involves considerable flexibility in this part of the protein.

CONCLUSIONS

Difference Fourier analysis together with the pattern of sequence conservation has led to the identification of both the glyoxylate and metal binding sites and implicates the C-terminal end of the TIM barrel as the active site, which is consistent with studies of other enzymes with this fold. Two disordered regions of the polypeptide chain lie close to the active site, one of which includes a critical cysteine residue suggesting that conformational rearrangements are essential for catalysis. Structural similarities between isocitrate lyase and both PEP mutase and enzymes belonging to the enolase superfamily suggest possible relationships in aspects of the mechanism.