Photocatalytic degradation of phenanthrene on soil surfaces in the presence of nanometer anatase TiO2 under UV-light

Emerging technologies for the removal of pesticides from contaminated soils and their reuse in agriculture

Pesticides are becoming more prevalent in agriculture to protect crops and increase crop yields. However, nearly all pesticides used for this purpose reach non-target crops and remain as residues for extended periods. Contamination of soil by widespread pesticide use, as well as its toxicity to humans and other living organisms, is a global concern. This has prompted us to find solutions and develop alternative remediation technologies for sustainable management. This article reviews recent technological developments for remediating pesticides from contaminated soil, focusing on the following major points: (1) The application of various pesticide types and their properties, the sources of pesticides related to soil pollution, their transport and distribution, their fate, the impact on soil and human health, and the extrinsic and intrinsic factors that affect the remediation process are the main points of focus. (2) Sustainable pesticide degradation mechanisms and various emerging nano- and bioelectrochemical soil remediation technologies. (3) The feasible and long-term sustainable research and development approaches that are required for on-site pesticide removal from soils, as well as prospects for applying them directly in agricultural fields. In this critical analysis, we found that bioremediation technology has the potential for up to 90% pesticide removal from the soil. The complete removal of pesticides through a single biological treatment approach is still a challenging task; however, the combination of electrochemical oxidation and bioelectrochemical system approaches can achieve the complete removal of pesticides from soil. Further research is required to remove pesticides directly from soils in agricultural fields on a large scale.

Recent advances in structural engineering of photocatalysts for environmental remediation

Photocatalysis appears to be an appealing approach for environmental remediation including pollutants degradation in water, air, and/or soil, due to the utilization of renewable and sustainable source of energy, i.e., solar energy. However, their broad applications remain lagging due to the challenges in pollutant degradation efficiency, large-scale catalyst production, and stability. In recent decades, massive efforts have been devoted to advance the photocatalysis technology for improved environmental remediation. In this review, the latest progress in this aspect is overviewed, particularly, the strategies for improved light sensitivity, charge separation, and hybrid approaches. We also emphasize the low efficiency and poor stability issues with the current photocatalytic systems. Finally, we provide future suggestions to further enhance the photocatalyst performance and lower its large-scale production cost. This review aims to provide valuable insights into the fundamental science and technical engineering of photocatalysis in environmental remediation.

Anchoring ZnO on spinel cobalt ferrite for highly synergic sono-photo-catalytic, surfactant-assisted PAH degradation from soil washing solutions

In this study, the photocatalytic activity of ZnO was effectively improved via its combination with spinel cobalt ferrite (SCF) nanoparticles. The catalytic performance of ZnO@SCF (ZSCF) was investigated in coupling with UV irradiation and ultrasound (US), as a heterogeneous sono-photocatalytic process, for the decontamination of phenanthrene (PHE) from contaminated soil. Soil washing tests were conducted in a batch environment, after extraction assisted by using Tween 80. Several characterization techniques such as XRD, FESEM-EDS, BET, TEM, UV-vis DRS, PL and VSM were utilized to determine the features of the as-prepared catalysts. ZSCF showed an excellent catalytic activity toward degradation of PHE in the presence of US and UV with a significant synergic effect. It was found that more than 93% of PHE (35 mg/L) and 87.5% of TOC could be eliminated by the integrated ZSCF/US/UV system under optimum operational conditions (pH: 8.0, ZSCF: 1.5 g/L, UV power: 6.0 W and US power: 70 W) within 90 min of reaction. After five times of use, ZSCF illustrated good reusability in the decontamination of PHE (87%) and TOC (79%). Quenching tests revealed the contribution of h⁺, HO^• and e^- species during PHE degradation over ZSCF/UV/US and an S-scheme photocatalytic mechanisms was proposed for the possible charge transfer routes under the ZSCF system. This study provides the important role of SCF in enhancing the ZnO photocatalytic activity due to its high performance, easy recovery and excellent durability, which it make an efficient and promising catalyst in environmental clean-up applications.

Recent advances in nanoremediation: Carving sustainable solution to clean-up polluted agriculture soils

Agriculture is one of the foremost significant human activities, which symbolizes the key source for food, fuel and fibers. This activity results in a lot of ecological harms particularly with the excessive usage of chemical fertilizers and pesticides. Different agricultural practices have remained industrialized to advance food production, due to the growth in the world population and to meet the food demand through the routine use of more effective fertilizers and pesticides. Soil is intensely embellished by environmental contamination and it can be stated as "universal incline." Soil pollution usually occurs from sewage wastes, accidental discharges or as byproducts of chemical residues of unrestrained production of numerous materials. Soil pollution with hazardous materials alters the physical, chemical, and biological properties, causing undesirable changes in soil fertility and ecosystem. Engineered nanomaterials offer various solutions for remediation of contaminated soils. Engineered nanomaterial-enable technologies are able to prevent the uncontrolled release of harmful materials into the environment along with capabilities to combat soil and groundwater borne pollutants. Currently, nanobiotechnology signifies a hopeful attitude to advance agronomic production and remediate polluted soils. Studies have outlined the way of nanomaterial applications to restore the eminence of the environment and assist the detection of polluted sites, along with potential remedies. This review focuses on the latest developments in agricultural nanobiotechnology and the tools developed to combat soil or land and or terrestrial pollution, as well as the benefits of using these tools to increase soil fertility and reduce potential toxicity.

Tailored photocatalysts and revealed reaction pathways for photodegradation of polycyclic aromatic hydrocarbons (PAHs) in water, soil and other sources

Polycyclic aromatic hydrocarbons (PAHs), which are in the class of persistent organic pollutants, are considered as hazardous pollutants. To date, these compounds were detected globally in soil, sludge, water, and other contamination sources. A variety of treatment methods have been used in recent years to degrade PAHs in the environment. Photocatalysis, among advanced techniques, is proposed as the most effective method for the treatment of PAHs. In this context, we introduce the classification of PAHs, summarize, and highlight the recent studies on photodegradation of various types of PAHs. A series of efficient photocatalysts, including TiO₂-, Ag₃PO₄-, ZnO-, MHCFs-based, and others, have been reported with the potential result for photodegradation of PAHs. Focus is also placed on revealing several possible reaction pathways for different types of PAHs that have been proposed in the literature. Particular attention to current status, challenges, and prospects in the future for enhanced photodegradation of PAHs are also discussed.

Nanotechnology in soil remediation - applications vs. implications

Engineered nanomaterials (ENMs) and nanotechnology have shown great potential in addressing complex problems and creating innovative approaches in soil remediation due to their unique features of high reactivity, selectivity and versatility. Meanwhile, valid concerns exist with regard to their implications towards the terrestrial environment and the ecosystem. This review summarizes: (i) the applications and the corresponding mechanisms of various types of ENMs for soil remediation; (ii) the environmental behavior of ENMs in soils and their interactions with the soil content; (iii) the environmental implications of ENMs during remedial applications. The overall objective is to promote responsible innovations so as to take optimal advantage of ENMs and nanotechnology while minimizing their adverse effects to the ecological system. It is critical to establish sustainable remediation methods that ensure a healthy and safe environment without bringing additional risk.

Recycling of titanium-coagulated algae-rich sludge for enhanced photocatalytic oxidation of phenolic contaminants through oxygen vacancy

In the 21st century, sludge disposal and resource recycling are global issues. Titanium coagulation has received increasing attention due its strong coagulation capability and sludge recycling. Titanium coagulation is highly efficient for the treatment of algae-laden micro-polluted surface water; however, the safe disposal of titanium-coagulated algae-rich sludge remains a challenge. Here, we report on the recycling of titanium-coagulated algae-rich sludge for the production of functional TiO₂ nanoflowers (TNFs) through a simple hydrothermal and calcination process. Anatase TNFs (particle size of 10-15 nm) with petal-like structures (mesoporous), relatively high specific surface areas, i.e. 299.4 m²g^-1, and low band gaps, i.e. 2.67 eV (compared to P-25), were obtained. Additionally, oxygen vacancy (OV) was generated on the surface of the recycled TNFs based on electron paramagnetic resonance (EPR) results, which were verified by the first-principles calculations within density-functional theory. These TNFs display high photocatalytic performance for the degradation of diverse phenolic organic contaminants, such as bisphenol A, diphenyl phenol, p-tert-butyl phenol, and resorcinol, i.e. > 95%, under mild ultraviolet light irradiation and without any sacrificial reagents. Formation of OV on TNFs not only efficiently inhibited the recombination of photo-generated electrons and holes but also facilitated contaminant adsorption and photo-generated electron transfer on the surface of the recycled TNFs, thereby promoting the generation of holes and hydroxyl and superoxide radicals which were regarded as the reactive oxygen species for attacking contaminants in the reactions. This study proposes a new perspective on recycling chemical-coagulated sludge for producing functional nanomaterials as photocatalysts.

Catalytic use of TiO2 nanowires in the photodegradation of Benzophenone-4 as an active ingredient in sunscreens

Water contamination has compromised the quality of this resource during the last years with the presence of persistent organic pollutants. Because of the resistance of these compounds to degradation, several advance oxidation techniques have been proposed. In this study, we report the employment of an advance oxidation technique in the degradation of benzophenone-4 (BP-4), using TiO₂ as catalyst, which was obtained following a fast-hydrothermal method. TiO₂ nanowires (TiO₂NWs) were fully characterized considering the morphology, elemental composition, oxidation states, vibrational modes and crystalline structure with SEM and TEM, EDS, XPS, FTIR and XRD, respectively. The photocatalytic degradation was carried out using a home-made photoreactor under slightly acidic conditions achieving an average of 90% removal. It was determined that the photocatalysis is the most probable route of degradation since the photolysis or catalysis procedures produce negligible contributions. An apparent kinetic constant of 1.29 × 10^-2 min^-1 was determined, according to a pseudo-first order reaction.

Mineralization of carcinogenic anthracene and phenanthrene by sunlight active bimetallic oxides nanocomposites

Polycyclic aromatic hydrocarbons (PAHs) are causing environmental concerns due to their persistent nature and carcinogenicity. Hence, their removal through advanced nanomaterials with characteristics of low-cost and high efficiency is essential. In view of this, bimetallic oxides (BMOs) nanocomposites of NiO-ZnO, ZnCo₂O_4, MnCo₂O₄ and CoFe₂O₄ were synthesized via green route using leaf extract of Aegle marmelos. Subsequently, these BMOs were investigated for photocatalytic removal of selected PAHs like anthracene (ANTH) and phenanthrene (PHEN) from water. Nanospheres of NiO-ZnO, ZnCo₂O_4, and CoFe₂O₄ and nanosheets of MnCo₂O₄ with particle size range of 10-30 nm were confirmed by transmission electron microscopy. At neutral pH, nanocomposites showed excellent ability in degrading 2 mg L^-1 of PAHs (ANTH: 98%; PHEN: 93%) within 12 h under the exposure of sunlight. Among the synthesized BMOs, NiO-ZnO was found best followed by ZnCo₂O_4, MnCo₂O₄ and CoFe₂O_4. This fact is attributed to the highest surface area (129 m² g^-1) and particles stability (zeta potential: -30 eV) of NiO-ZnO. Photodegradation of PAHs by nanocomposites followed first order kinetics and fitted in Langmuir model for adsorption. Higher degradation under sunlight and lower removal efficiency with scavenger confirmed the photodegradation activity of nanocomposites. Overall, reusable (n = 10) nanocomposites with no loss of activity have high photocatalytic potential in the removal of carcinogenic PAHs.

Nanotechnology for Environmental Remediation: Materials and Applications

Environmental remediation relies mainly on using various technologies (e.g., adsorption, absorption, chemical reactions, photocatalysis, and filtration) for the removal of contaminants from different environmental media (e.g., soil, water, and air). The enhanced properties and effectiveness of nanotechnology-based materials makes them particularly suitable for such processes given that they have a high surface area-to-volume ratio, which often results in higher reactivity. This review provides an overview of three main categories of nanomaterials (inorganic, carbon-based, and polymeric-based materials) used for environmental remediation. The use of these nanomaterials for the remediation of different environmental contaminants-such as heavy metals, dyes, chlorinated organic compounds, organophosphorus compounds, volatile organic compounds, and halogenated herbicides-is reviewed. Various recent examples are extensively highlighted focusing on the materials and their applications.

Degradation of toxic PAHs in water and soil using potassium zinc hexacyanoferrate nanocubes

Polycyclic aromatic hydrocarbons (PAHs) the ubiquitous, persistent and carcinogenic environmental contaminants have raised concern worldwide. Recently, their removal methodologies are advanced after exploring nanomaterials. Therefore, degradation of selected toxic PAHs (3-5 rings) using potassium zinc hexacyanoferrate (KZnHCF) nanocubes was studied. Highly crystalline and sharp KZnHCF nanocubes (∼100 nm) were obtained by green route using sapindus mukorossi. In both water and soil, anthracene and phenanthrene were degraded to maximum extent (80-93%), whereas, the degradation of fluorene, chrysene and benzo (a) pyrene were ∼70-80%.Because of small size (lower molecular weight), large number of anthracene and phenanthrene molecules were adsorbed on catalyst as compared to other PAHs. Higher degradation of PAHs in water than in the soil is attributed to the easy absorption of PAHs on catalyst in water and slow diffusion of PAHs on organic content of soil. PAHs were degraded at the concentration of 50 mg/L, 25 mg catalyst dose, neutral pH and solar irradiation. Higher proficiency of the catalyst was revealed by degradation of PAHs into small and non-toxic by-products such as malealdehyde, 4-oxobut-2-enoic acid and o-xylene. Overall, the potential KZnHCF nanostructures open future scope for eradication of other pollutants from the environment.

Synergistic photocatalytic degradation of pyridine using precious metal supported TiO2 with KBrO3

A series of precious metals catalysts (M/TiO2, M = Ru, Rh, Pd, Ag, Ir, Pt or Au) were prepared by a light deposition method and the synergistic photocatalytic degradations of pyridine (20 mg/L) under UV irradiation (365 nm) using M/TiO2 with electron capture agent KBrO3 have been investigated. The results show that KBrO3 has a greatly synergistic role on M/TiO2 and the photocatalytic activity of M/TiO2 is closely related to its work function. Ag could greatly enhance the activity of TiO2 due to the binding characteristics of pyridine on Ag. Under the conditions of 0.5 wt.% Ag loading, Ag/TiO2 concentration of 0.1 g/L, KBrO3 concentration of 10 mmol/L and reaction liquid pH value at 9, the pyridine can be degraded by 64% within 3 hr, doubled than TiO2 photocatalytic system. The degradation kinetics of pyridine follows first-order kinetics and k = 5.53 x 10(-3) min-1.