Self-assembly of poly(ethylene glycol)-based block copolymers for biomedical applications

Controlling self-assembling co-polymer coatings of hydrophilic polysaccharide substrates via co-polymer block length ratio

HYPOTHESIS

The degree of polymerization of amphiphilic di-block co-polymers, which can be varied with ease in computer simulations, provides a means to control self-assembling di-block co-polymer coatings on hydrophilic substrates.

SIMULATIONS

We examine self-assembly of linear amphiphilic di-block co-polymers on hydrophilic surface via dissipative particle dynamics simulations. The system models a glucose based polysaccharide surface on which random co-polymers of styrene and n-butyl acrylate, as the hydrophobic block, and starch, as the hydrophilic block, forms a film. Such setups are common in e.g. hygiene, pharmaceutical, and paper product applications.

FINDINGS

Variation of the block length ratio (35 monomers in total) reveals that all examined compositions readily coat the substrate. However, strongly asymmetric block co-polymers with short hydrophobic segments are best in wetting the surface, whereas approximately symmetric composition leads to most stable films with highest internal order and well-defined internal stratification. At intermediate asymmetries, isolated hydrophobic domains form. We map the sensitivity and stability of the assembly response for a large variety of interaction parameters. The reported response persists for a wide polymer mixing interactions range, providing general means to tune surface coating films and their internal structure, including compartmentalization.

Non-Bulk Morphologies of Extremely Thin Block Copolymer Films Cast on Topographically Defined Substrates Featuring Deep Trenches: The Importance of Lateral Confinement

Directed self-assembly of block copolymers is evolving toward applications that are more defect-tolerant but still require high morphological control and could benefit from simple, inexpensive fabrication processes. Previously, we demonstrated that simply casting ultra-thin block copolymer films on topographically defined substrates leads to hierarchical structures with dual patterns in a controlled manner and unraveled the dependence of the local morphology on the topographic feature dimensions. In this article, we discuss the extreme of the ultraconfined thickness regime at the border of film dewetting. Additional non-bulk morphologies are observed at this extreme, which further elaborate the arsenal of dual patterns that could be obtained in coexistence with full placement control. It is shown that as the thickness confinement approaches its limit, lateral confinement imposed by the width of the plateaus becomes a critical factor influencing the local morphology.

Iodination of PEGylated Polymers Counteracts the Inhibition of Fibrinogen Adsorption by PEG

Poly(ethylene glycol), PEG, known to inhibit protein adsorption, is widely used on the surfaces of biomedical devices when biofilm formation is undesirable. Poly(desaminotyrosyl-tyrosine ethyl ester carbonate), PDTEC, PC for short, has been a promising coating polymer for insertion devices, and it has been anticipated that PEG plays a similar role if it is copolymerized with PC. Earlier studies show that no fibrinogen (Fg) is adsorbed onto PC polymers with PEG beyond the threshold weight percentage. This is attributed to the phase separation of PEG. Further, iodination of the PC units in the PC polymer, (I₂PC), has been found to counteract this Fg-repulsive effect by PEG. In this study, we employ surface-sensitive X-ray techniques to demonstrate the surface affinity of Fg toward the air-water interface, particularly in the presence of self-assembled PC-based film, in which its constituent polymer units are assumed to be much more mobile as a free-standing film. Fg is found to form a Gibbs monolayer with its long axis parallel to the aqueous surface, thus maximizing its interactions with hydrophobic interfaces. It influences the amount of insoluble, surface-bound I₂PC likely due to the desorption of the formed Fg-I₂PC complex and/or the penetration of Fg onto the I₂PC film. The results show that the phase behavior at the liquid-polymer interface shall be taken into account for the surface behavior of bulk polymers surrounded by tissue. The ability of PEG units rearranging into a protein-blocking layer, rather than its mere presence in the polymer, is the key to antifouling characteristics desired for polymeric coating on insertion devices.

Recent Progress in Materials Chemistry to Advance Flexible Bioelectronics in Medicine

Designing bioelectronic devices that seamlessly integrate with the human body is a technological pursuit of great importance. Bioelectronic medical devices that reliably and chronically interface with the body can advance neuroscience, health monitoring, diagnostics, and therapeutics. Recent major efforts focus on investigating strategies to fabricate flexible, stretchable, and soft electronic devices, and advances in materials chemistry have emerged as fundamental to the creation of the next generation of bioelectronics. This review summarizes contemporary advances and forthcoming technical challenges related to three principal components of bioelectronic devices: i) substrates and structural materials, ii) barrier and encapsulation materials, and iii) conductive materials. Through notable illustrations from the literature, integration and device fabrication strategies and associated challenges for each material class are highlighted.

A generic self-assembly approach towards phototheranostics for NIR-II fluorescence imaging and phototherapy

Controllable self-assembly of photonic molecules for precise biomedicine is highly desirable but challenging to prepare multifunctional nano-phototheranostics. Herein, we developed a generic self-assembly approach to design nano-phototheranostics that provides NIR-II fluorescence imaging and phototherapy. We first designed and synthesized two amphiphilic photonic molecules, PEG₂₀₀₀-IR806 and BODIPY. Then, we prepared the co-self-assembled phototheranostic agents, PEG₂₀₀₀-IR806/BODIPY nanoparticles (PIBY NPs). The morphology of the PIBY NPs is controllable by adjusting the ratio of PEG₂₀₀₀-IR806 and BODIPY during self-assembly. The NIR-II fluorescence properties and phototherapy capability of the PIBY NPs were demonstrated in vitro and in vivo. By tuning the ratio of PEG₂₀₀₀-IR806 and BODIPY, the PIBY NPs showed various morphologies (e.g. spherical nanoparticles, nanovesicles and rod-like nanoparticles). The PEG₂₀₀₀-IR806 plays two roles in the co-self-assemblies, one is second near-infrared (NIR-II, 1000-1700 nm) agent, the other is the surfactant for BODIPY encapsulation. The phototherapeutic PIBY NPs all show bright NIR-II fluorescence and effective phototherapeutic (photothermal and photodynamic) properties, which are attributed to IR806 and BODIPY, respectively. The driving force of the self-assembly can be attributed to the electrostatic interaction between NIR806 and BODIPY and their hydrophobicity. The rod-like PIBY NPs (rPIBY NPs) demonstrated a low half inhibitory concentration (IC₅₀) of 3.96 µg/mL on U87MG cells. The NIR-II imaging showed the accumulation of rPIBY NPs in the tumor region. After systemic injection of rPIBY NPs at low dose (0.5 mg/kg), the tumor growth was greatly inhibited upon laser irradiation without noticeable side effects. This study provides a generic self-assembly approach to fabricate NIR-II imaging and phototherapeutic platform for cancer phototheranostics. STATEMENT OF SIGNIFICANCE: Nanophototheranostics providing NIR-II fluorescence imaging and phototherapy are expected to play a critical role in modern precision medicine. Controllable self-assembly of optical molecules for the fabrication of efficient nanophototheranostics is highly desirable but challenging. This work reports for the first time the co-assembly of a NIR-II imaging contrast agent and a phototherapeutic agent to yield nanophototheranostics with various morphologies. The design of molecular co-assembly with complementary optical functions can be a generic method for future the development of phototheranostics.

Design of biointerfaces composed of soft materials using controlled radical polymerizations

Soft interface materials have an immense potential for the improvement of biointerfaces, which are the interface of biological and artificially designed materials. Controlling the chemical and physical structures of the interfaces at the nanometer level plays an important role in understanding the mechanism of the functioning and its applications. Controlled radical polymerization (CRP) techniques, including atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, have been developed in the field of precision polymer chemistry. It allows the formation of well-defined surfaces such as densely packed polymer brushes and self-assembled nanostructures of block copolymers. More recently, a novel technique to prepare polymers containing biomolecules, called biohybrids, has also been developed, which is a consequence of the advancement of CRP so as to proceed in an aqueous media with oxygen. This review article summarizes recent advances in CRP for the design of biointerfaces.

Postsynthesis Self- And Coassembly of Enzymatically Produced Fluorinated Cellodextrins and Cellulose Nanocrystals

The design of new functional materials and devices substantially relies on self-assembly of hierarchical structures. Formation of 2D platelets is known in the enzymatic synthesis of cellulose-like polymers. Here we demonstrate the feasibility of postsynthesis assembly of novel fluorinated cellodextrins. Highly ordered 2D structures of large lateral dimensions, unattainable in the polymerization process, can be formed because of postsynthesis assembly of the cellodextrins. These cellodextrins were also involved in coassembly with cellulose nanocrystals (CNCs) leading to hybrid systems. The hybrid architectures obtained depend on the content of fluorine atoms in the fluorinated cellodextrins. Monofluorinated cellodextrins coassemble with CNCs into a nanoweb, while multifluorinated cellodextrins assemble around the CNCs.

Solvent Selectivity Governs the Emergence of Temperature Responsiveness in Block Copolymer Self-Assembly

In highly selective solvents, block copolymers (BCPs) form association colloids, while in solvents with poor selectivity, they exhibit a temperature-controlled (de)mixing behavior. Herein, it is shown that a temperature-responsive self-assembly behavior emerges in solvent mixtures of intermediate selectivity. A biocompatible poly-ethylene(oxide)-block-poly-ε-caprolactone (PEO-PCL) BCP is used as a model system. The polymer is dissolved in solvent mixtures containing water (a strongly selective solvent for PEO) and ethanol (a poorly selective solvent for PEO) to tune the solvency conditions. Using synchrotron X-ray scattering, cryogenic transmission electron microscopy, and scanning probe microscopy, it is shown that a rich temperature-responsive behavior can be achieved in certain solvent mixtures. Crystallization of the PCL block enriches the phase behavior of the BCP by promoting sphere-to-cylinder morphology transitions at low temperatures. Increasing the water fraction in the solvent causes a suppression of the sphere-to-cylinder morphology transition. These results open up the possibility to induce temperature-responsive properties on demand in a wide range of BCP systems.

Phosphorylcholine-Grafted Molecular Bottlebrush-Doxorubicin Conjugates: High Structural Stability, Long Circulation in Blood, and Efficient Anticancer Activity

Controlling the particle structure of tumor-targeting nanomedicines in vivo remains challenging but must be achieved to control their in vivo fate and functions. Molecular bottlebrushes (MBs), where brush side chains are densely grafted from a main chain, have recently received attention as building blocks of polymer-based prodrugs because their rigid structure would be expected to demonstrate high structural stability in vivo. Here, we synthesized a poly(methacryloyloxyethyl phosphorylcholine) (pMPC)-grafted molecular bottlebrush (PCMB) conjugated with a cancer drug, doxorubicin (DOX), via an acid-cleavable hydrazone bond. A pMPC-based linear polymer (LP) conjugated with DOX was also prepared for comparison. We confirmed the lack of structural transition in the PCMB between before and after conjugation with DOX using small-angle light and X-ray scattering techniques, whereas the structure of LP was significantly influenced by DOX conjugation and transformed from a random-coil structure to a large agglomerate via hydrophobic interactions among DOXs. Although PCMB-DOX and LP-DOX showed comparable tissue permeability, pharmacokinetics, and ability to accumulate in tumor tissues, the antitumor efficacy of PCMB-DOX was better than that of LP-DOX. This was presumably due to the formation of LP-DOX agglomerates. The diffusion of cleaved DOX would be restricted in the hydrophobic core of the agglomerate, resulting in the DOX release at the tumor site being compromised. In contrast to LP-DOX, DOX release from PCMB-DOX was not compromised after accumulation in tumor tissues because it did not form such an agglomerate, resulting in the strong antitumor effect. We have demonstrated the potential of MBs as building blocks of drug carriers and believe that these findings can contribute to the design of polymer-based nanomedicines.

Core-shell nanostructures: perspectives towards drug delivery applications

Nanosystems have shown encouraging outcomes and substantial progress in the areas of drug delivery and biomedical applications. However, the controlled and targeted delivery of drugs or genes can be limited due to their physicochemical and functional properties. In this regard, core-shell type nanoparticles are promising nanocarrier systems for controlled and targeted drug delivery applications. These functional nanoparticles are emerging as a particular class of nanosystems because of their unique advantages, including high surface area, and easy surface modification and functionalization. Such unique advantages can facilitate the use of core-shell nanoparticles for the selective mingling of two or more different functional properties in a single nanosystem to achieve the desired physicochemical properties that are essential for effective targeted drug delivery. Several types of core-shell nanoparticles, such as metallic, magnetic, silica-based, upconversion, and carbon-based core-shell nanoparticles, have been designed and developed for drug delivery applications. Keeping the scope, demand, and challenges in view, the present review explores state-of-the-art developments and advances in core-shell nanoparticle systems, the desired structure-property relationships, newly generated properties, the effects of parameter control, surface modification, and functionalization, and, last but not least, their promising applications in the fields of drug delivery, biomedical applications, and tissue engineering. This review also supports significant future research for developing multi-core and shell-based functional nanosystems to investigate nano-therapies that are needed for advanced, precise, and personalized healthcare systems.

Integration of PEGylated Polyaniline Nanocoatings with Multiple Plastic Substrates Generates Comparable Antifouling Performance

Conducting polymer nanocoatings render plastics to possess interesting optical, chemical, and electrical properties. It nevertheless remains technically challenging to deposit uniform conducting polymer nanocoatings on ambient plastic substrates ascribed to the inert and varied chemical properties of plastics and the notorious processability of conducting polymers. Previous studies have made progress in delivering various conducting polymer thin films via oxidative chemical vapor deposition. Herein, we develop a solution-based approach to polyaniline (PANI) and PEGylated PANI nanocoatings on multiple engineering plastics followed by evaluating their antifouling performance. The procedure relies on the formation of uniform, lyotropic V₂O₅·nH₂O thin films on plastics assisted by a surfactant-sodium N-lauroylsarcosinate. Next, in situ, oxidative polymerization causes the formation of nanofibrous PANI nanocoatings. Finally, interfacial functionalization leads to PEGylated PANI nanocoatings, and the steric nanolayer effectively repels the adsorption of bovine serum albumin and the attachment of the bacterium Pseudoalteromonas sp. on the surface. It is worth noting that the antifouling properties rely mainly on the presence of PEGylated PANI nanocoatings, irrespective of the type of plastic substrates underneath. The current study therefore opens an avenue for the solution-based delivery of conducting polymer-based, functional nanocoatings on hydrophobic substrates in a controllable manner with the availability of further modification.

ABC triblock bottlebrush copolymer-based injectable hydrogels: design, synthesis, and application to expanding the therapeutic index of cancer immunochemotherapy

Bottlebrush copolymers are a versatile class of macromolecular architectures with broad applications in the fields of drug delivery, self-assembly, and polymer networks. Here, the modular nature of graft-through ring-opening metathesis polymerization (ROMP) is exploited to synthesize "ABC" triblock bottlebrush copolymers (TBCs) from polylactic acid (PLA), polyethylene glycol (PEG), and poly(N-isopropylacrylamide) (PNIPAM) macromonomers. Due to the hydrophobicity of their PLA domains, these TBCs self-assemble in aqueous media at room temperature to yield uniform ∼100 nm micelles that can encapsulate a wide range of therapeutic agents. Heating these micellar solutions above the lower critical solution temperature (LCST) of PNIPAM (∼32 °C) induces the rapid formation of multi-compartment hydrogels with PLA and PNIPAM domains acting as physical crosslinks. Following the synthesis and characterization of these materials in vitro, TBC micelles loaded with various biologically active small molecules were investigated as injectable hydrogels for sustained drug release in vivo. Specifically, intratumoral administration of TBCs containing paclitaxel and resiquimod-the latter a potent Toll-like receptor (TLR) 7/8 agonist-into mice bearing subcutaneous CT26 tumors resulted in a significantly enhanced therapeutic index compared to the administration of these two drugs alone. This effect is attributed to the TBC hydrogel maintaining a high local drug concentration, thus reducing systemic immune activation and local inflammation. Collectively, this work represents, to our knowledge, the first example of thermally-responsive TBCs designed for multi-compartment hydrogel formation, establishing these materials as versatile scaffolds for self-assembly and drug delivery.

Synthesis and characterization of nanoemulsion-mediated core crosslinked nanoparticles, and in vivo pharmacokinetics depending on the structural characteristics

For designing nanoparticles as drug carriers, a covalently crosslinked structure is necessary for the structural stability in vivo. In this study, we prepared core crosslinked nanoparticles through the formation of nanoemulsions stabilized by poly(ethylene glycol) (PEG)-bearing surfactants. The structural characteristics of these particles were carefully evaluated using small-angle scattering techniques including dynamic, static, X-ray, and neutron scattering. The particles demonstrated high stability even in vivo, with the suppression of premature drug release owing to the crosslinked structure. Interestingly, the ability to retain encapsulated molecules was dependent on the molecular weight of PEG in vivo, presumably due to the difference in the crowding density of PEG chains at the outermost surface. This suggests that conferring structural stability via a core crosslinked structure is surely important, but we also need to consider controlling the crowding density of the hydrophilic polymer chains in the particle shell when designing drug carriers.

Rapid synthesis of PEGylated multiblock polymers by sequence-controlled polymerization in H2O

Multiblock polymers with a poly(ethylene glycol) (PEG) block are attractive candidates for biomedical applications because of their favorable properties regarding biocompatibility and hydrophilicity.

Furry nanoparticles: synthesis and characterization of nanoemulsion-mediated core crosslinked nanoparticles and their robust stability in vivo

Core crosslinked nanoparticles were prepared via nanoemulsion stabilized by a poly(ethylene glycol)-bearing surfactant, which show high structural stability in vivo.

Temperature-Activated PEG Surface Segregation Controls the Protein Repellency of Polymers

Poly(ethylene glycol) (PEG) is widely used to modulate the hydration states of biomaterials and is often applied to produce nonfouling surfaces. Here, we present X-ray scattering data, which show that it is the surface segregation of PEG, not just its presence in the bulk, that makes this happen by influencing the hydrophilicity of PEG-containing substrates. We demonstrate a temperature-dependent trigger that transforms a PEG-containing substrate from a protein-adsorbing to a protein-repelling state. On films of poly(desaminotyrosyl-tyrosine-co-PEG carbonate) with high (20 wt %) PEG content, in which very little protein adsorption is expected, quartz crystal microbalance data showed significant adsorption of fibrinogen and bovine serum albumin at 8 °C. The surface became protein-repellent at 37.5 °C. When the same polymer was iodinated, the polymer was protein-adsorbent, even when 37 wt % PEG was incorporated into the polymer backbone. This demonstrates that high PEG content by itself is not sufficient to repel proteins. By inhibiting phase separation either with iodine or by lowering the temperature, we show that PEG must phase-separate and bloom to the surface to create an antifouling surface. These results suggest an opportunity to design materials with high PEG content that can be switched from a protein-attractant to a protein-repellent state by inducing phase separation through brief exposure to temperatures above their glass transition temperature.

Impact of covalently Nile Red and covalently Rhodamine labeled fluorescent polymer micelles for the improved imaging of the respective drug delivery system

Novel fluorescently labeled poly(ethylene glycol)-poly(hydroxyoctanoic acid) (MPEG-PHOA) block-copolymers were synthesized for the improved visualization of the deriving polymeric micelle drug delivery system. Albeit commonly used, one has to be aware that by simple incorporation of Nile Red (hydrophobic) or Rhodamine B (hydrophilic) as fluorescent compounds in nanocarriers (e.g., nanoparticles, liposomes or micelles) for imaging applications, these fluorescent probes can diffuse out of the carrier system and lead to artefacts due to the concomitant fluorescence loss or areal distribution. In order to inhibit such an uncontrolled diffusion, the Nile Red derivative 2-((9-(diethylamino)-5-oxo-5H-benzo[a]phenoxazin-2-yl)oxy)acetic acid was synthesized and covalently attached to the MPEG-PHOA block-copolymer via a mild Mitsunobu reaction to yield the desired MPEG-PHOA-Nile Red polymer for micelle preparations. Rhodamine B was coupled via its native carboxylic acid group with the copolymer MPEG-PHOA under mild conditions using DMAP, EDC, and NHS. For the proof of concept, aqueous solutions of composite micelles made of 0.5% (w/w fluorescence dye) MPEG-PHOA-dye and MPEG-PHOA copolymers were prepared ("spiking" of the non-labeled base MPEG-PHOA micelles) and characterized by transmission electron microscopy (TEM), dialysis and fluorescence spectrometry. The fluorescence intensity of the Nile Red in the solutions was followed up at physiological temperatures and pH values (37 °C, pH = 7.4 PBS buffer 0.01 M) over a period of 8 weeks. The labeled and non-labeled micelle formulations were tested in vitro in cells (Rhodamine-micelle formulations), then in vivo in a case study of an ophthalmic application (Nile Red micelle formulations). Both in vitro and in vivo experiments revealed a significant improvement of fluorescence stability of the MPEG-PHOA-dye formulations, facilitating the investigations on tracing the micelles and their stability. The results clearly demonstrate the value of the novel Nile Red and Rhodamine derivatives, whose simple synthesis and covalent attachment may easily be transferred to other nanosized polymeric drug delivery systems, e.g., MPEGylated or non-MPEGylated PLA/PLGA nanoparticles and be envisioned for novel theranostic systems.

Structural engineering to control density, conformation, and bioactivity of the poly(ethylene glycol)-grafted poly(urethane urea) scaffolds

Poly(urethane urea) scaffolds were fabricated through combined salt leaching and solvent casting methods. The scaffolds were then functionalized via aminolysis with poly(ethylene glycol) (PEG- g-PUU). To compare its bioactivity, gelatin was also grafted onto the aminolyzed poly(urethane urea) surface (Gel- g-PUU). Chemical changes at the surface were then monitored using quantitative/qualitative methods. Grafting with both gelatin and poly(ethylene glycol) remarkably enhanced the wettability of poly(urethane urea). Proliferation of human adipose–derived mesenchymal stem cells on poly(urethane urea) and the modified poly(urethane urea)s was evaluated by 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide assay. The cell experiment results showed that both the modified poly(urethane urea)s enhanced the attachment and proliferation of human adipose–derived mesenchymal stem cells compared to pure poly(urethane urea). Based on previous reports, while a supportive role is observed at adequate poly(ethylene glycol) graft densities, cell adhesion and proliferation are inhibited at very high grafting densities. To correlate the cell data to poly(ethylene glycol) conformations, the surface tension was measured. Data on human adipose–derived mesenchymal stem cells’ attachment/proliferation and contact angle/surface free energy together showed that the grafting density of poly(ethylene glycol) was regulated by optimizing aminolysis conditions, careful selection of poly(ethylene glycol)’s molecular weight, and bulk properties of the matrix poly(urethane urea). As a result, surface overcrowding and brush conformation of the poly(ethylene glycol) chains were avoided, and human adipose–derived mesenchymal stem cell attachment and proliferation occurred on the PEG- g-PUU scaffold at a comparable level to the Gel- g-PUU.

Heterofunctional Poly(ethylene glycol) (PEG) Macroinitiator Enabling Controlled Synthesis of ABC Triblock Copolymers

ABC triblock copolymers with a poly(ethylene glycol) (PEG) midblock have attractive properties for biomedical applications because of PEG's favorable properties regarding biocompatibility and hydrophilicity. However, easy strategies to synthesize polymers containing a PEG midblock are limited. In this study, the successful synthesis of a heterofunctional PEG macroinitiator containing both an azoinitiator and an atom transfer radical polymerization (ATRP) initiator is demonstrated. This novel PEG macroinitiator allows the development of elegant synthesis routes for PEG midblock-containing ABC copolymers that does not require protection of initiating sites or polymer end-group postmodification. Polymers with outer blocks composed of different monomers were synthesized to illustrate the versatility of this macroinitiator. N-Isopropylacrylamide (NIPAM) was included to obtain thermosensitive polymers, 2-(dimethylamino)ethyl methacrylate (DMAEMA) provided pH-sensitive properties, and 2-hydroxyethyl acrylate (HEA) functioned as a noncharged hydrophilic block that also allows for postmodifications reactions. This synthesis approach can further contribute to the design of high-precision polymers with tailorable block compositions and polymer topologies, which is highly attractive for applications in nanotechnology.

Self-Assembly of Calix[4]arene-Based Amphiphiles Bearing Polyethylene Glycols: Another Example of "Platonic Micelles"

The aggregation number of classical micelles exhibits a certain distribution, which is a recognizable feature of conventional micelles. However, we recently identified perfectly monodisperse calix[4]arene-based micelles whose aggregation numbers agree with the vertex numbers of regular polyhedra, that is, Platonic solids, and thus they are named "Platonic micelles". Regarding our hypothesis of the formation mechanism of Platonic micelles, both repulsive interactions including steric hindrance and electrostatic repulsions among the headgroups are important for determining their aggregation number; however, neither of these is necessarily needed to consider. In this study, we employed polyethylene glycols (PEGs) as the nonionic headgroup of calix[4]arene-based amphiphiles to study the effects of only repulsive interactions caused by steric hindrance on the formation of Platonic micelles. The amphiphiles containing relatively low-molecular-weight PEGs (550 or 1000 g mol^-1) form dodecamer or octamer micelles, respectively, with no variation in the aggregation number. However, relatively high-molecular-weight PEGs (2000 g mol^-1) produce polydispersed micelles with a range of aggregation number. PEG 2000 exhibits a greater affinity for water than PEG 550 and 1000, resulting in fewer hydrophobic interactions in micelle formation, as indicated by the drastic increase of the critical micelle concentration (CMC) value in the PEG 2000 system. The instability of the structure of PEG_2kCaL5 micelles might contribute to the higher mobility of PEG in the micellar shell, resulting in a non-Platonic aggregation number with polydispersity.

Depth-Profiling the Nuclease Stability and the Gene Silencing Efficacy of Brush-Architectured Poly(ethylene glycol)-DNA Conjugates

PEGylation of an oligonucleotide using a brush polymer can improve its biopharmaceutical characteristics, including enzymatic stability and biodistribution. Herein, we quantitatively explore the nuclease accessibility of the nucleic acid as a function of "depth" toward the backbone of the brush polymer. It is found that protein accessibility decreases as the nucleotide is located closer to the backbone. Thus, by moving the conjugation point from the terminus of the nucleic acid strand to an internal position, much smaller brushes can be used to achieve the same level of steric shielding. This finding also makes it possible to assess antisense gene regulation efficiency of these brush-DNA conjugates as a function of their nuclease stability.

Hydrogel Layers on the Surface of Polyester-Based Materials for Improvement of Their Biointeractions and Controlled Release of Proteins

The modification of bioresorbable polyester surfaces in order to alter their biointeractions presents an important problem in biomedical polymer science. In this study, the covalent modification of the surface of poly(lactic acid)-based (PLA-based) films with poly(acryl amide) and sodium alginate hydrogels was performed to change the non-specific polyester interaction with proteins and cells, as well as to make possible the covalent attachment of low-molecular weight ligands and to control protein release. The effect of such modification on the film surface properties was studied. Parameters such as swelling, water contact angle, surface area, and binding capacity of low-molecular weight substances were evaluated and compared. The comparative study of adsorption of model protein (BSA) on the surface of non-modified and modified films was investigated and the protein release was evaluated. Cell viability on the surface of hydrogel-coated films was also tested. The developed approach could be applied for the modification of PLA-based scaffolds for tissue engineering and will be further studied for molecular-imprinting of biomolecules on the surface of polyester-based materials for control of biointeractions.

Making Silicone Rubber Highly Resistant to Bacterial Attachment Using Thiol-ene Grafting

Biomedical devices are indispensable in modern medicine yet offer surfaces that promote bacterial attachment and biofilm formation, resulting in acute and chronic healthcare-associated infections. We have developed a simple method to graft acrylates to silicone rubber, polydimethylsiloxane (PDMS), a commonly used device material that is often colonized by bacteria. We demonstrate a novel method whereby nontoxic bacteria attachment-resistant polymers can be readily grafted from and grafted to the surface using thiol-ene chemistry, substantially reducing bacterial colonization. With use of this approach, bacterial biofilm coverage can be reduced by 99% compared with standard PDMS in an in vitro assay. This grafting approach offers significant advantages over commonly used physisorbed coatings, especially in areas of high shear or mechanical stress. Furthermore, the approach is versatile such that the grafted material properties can be tailored for the desired final application.

The electrostatic co-assembly in non-stoichiometric aqueous mixtures of copolymers composed of one neutral water-soluble and one polyelectrolyte (either positively or negatively charged) block: a dissipative particle dynamics study

The electrostatic co-assembly in non-stoichiometric aqueous mixtures of diblock copolymers.

Characterizing Drug Release from Nonfouling Polyampholyte Hydrogels

Controlled delivery of bioactive signaling molecules and drugs is essential for the development of the next generation of tissue regeneration scaffolds. However, these molecules must be delivered from a nonfouling platform, so that the therapeutic role is not masked by the naturally occurring foreign body response. Therefore, the purpose of this study is to characterize the release profiles of three pseudodrug molecules from a nonfouling polyampholyte hydrogel to gain insight into the potential for this platform to serve as a tissue regeneration scaffold. Hydrogels composed of equimolar concentrations of [2-(acryloyloxy)ethyl] trimethylammonium chloride (TMA) and 2-carboxyethyl acrylate (CAA) monomers were synthesized in the presence of caffeine, methylene blue, or metanil yellow. Then the release of these three molecules was tracked as a function of the hydrogel cross-linker density, the solution pH, and the solution ionic strength. The results suggest that the release of the neutral caffeine molecule is dictated by diffusion alone, while the release of the two charged pseudodrug molecules are controlled by their interactions with the charged regions of the TMA and CAA monomer subunits. These interactions are clearly impacted by solution pH and ionic strength leading to clear changes in the rate of release and extent of release for metanil yellow and methylene blue. Additionally, an enzyme-linked immunosorbent assay was used to confirm that the TMA:CAA hydrogels retain their nonfouling characteristics following the release of the pseudodrug molecules. When these results are combined with the literature related to TMA:CAA hydrogels, it is concluded that this system represents a promising multifunctional platform for both short-term and long-term delivery of bioactive molecules for tissue regeneration.

Complete dissociation and reassembly behavior as studied by using poly(ethylene glycol)-block-poly(glutamate sodium) and kanamycin A

Kanamycin A, an amino modified sugar, can interact with poly(ethylene glycol)-block-poly(glutamate sodium) (PEG114-PGlu64) via electrostatic interactions (with PGlu) and hydrogen bonding (with PEG). The interplay of these two forces determines the assembly process and the resulting structure. In deionized water, kanamycin A and PEG114-PGlu64 form a spherical structure at [+]/[-] = 3.5. This structure dissociates instantly and completely in the presence of 30 mM NaCl. However, a new structure is reassembled in about 2 hours. A similar phenomenon is observed when the buffer pH is increased from 7.8 to 8.3. We attribute the distinct dissociation/reassembly process to the reestablishment of the balance between electrostatic interactions and hydrogen bonding. The dissociation/reassembly process in response to environmental changes offers a novel approach to release the loaded cargo in a controlled manner.

Phase behaviors of side chain liquid crystalline block copolymers

The microphase separation of side chain liquid crystalline (SCLC) block copolymers was studied using dissipative particle dynamics (DPD) simulations.

Fabrication of robust hydrogel coatings on polydimethylsiloxane substrates using micropillar anchor structures with chemical surface modification

A durable hydrophilic and protein-resistant surface of polydimethylsiloxane (PDMS) based devices is desirable in many biomedical applications such as implantable and microfluidic devices. This paper describes a stable antifouling hydrogel coating on PDMS surfaces. The coating method combines chemical modification and surface microstructure fabrication of PDMS substrates. Three-(trimethoxysilyl)propyl methacrylates containing C═C groups were used to modify PDMS surfaces with micropillar array structures fabricated by a replica molding method. The micropillar structures increase the surface area of PDMS surfaces, which facilitates secure bonding with a hydrogel coating compared to flat PMDS surfaces. The adhesion properties of the hydrogel coating on PDMS substrates were characterized using bending, stretching and water immersion tests. Long-term hydrophilic stability (maintaining a contact angle of 55° for a month) and a low protein adsorption property (35 ng/cm(2) of adsorbed BSA-FITC) of the hydrogel coated PDMS were demonstrated. This coating method is suitable for PDMS modification with most crosslinkable polymers containing C═C groups, which can be useful for improving the anti-biofouling performance of PDMS-based biomedical microdevices.

Preparation of novel curcumin-loaded multifunctional nanodroplets for combining ultrasonic development and targeted chemotherapy

Recently, a new class of multifunctional nanodroplets that combine the properties of polymeric drug carriers, ultrasound imaging contrast agents, and enhancers of ultrasound-mediated drug delivery has been developed. We studied the formation mechanism of nanodroplets of a drug and its application in chemotherapy. Curcumin was loaded in polymeric micelles as a anti-cancer drug using polyethylene glycol block-poly(caprolactone) with encapsulation efficiency of 95.60%. At room temperature, the developed systems comprised perfluorocarbon nanodroplets stabilized by walls comprising biodegradable block copolymers. Upon heating to 37°C, the nanodroplets were converted to nano/microbubbles. Under ultrasound, nanobubbles cavitated and collapsed, resulting in release of the encapsulated drug. The percentage release of curcumin-loaded nanodroplets by insonation was 90.95%, showing enhancement compared with the non-ultrasound group. Nanodroplets strongly retained the loaded drugs in vivo yet, under ultrasound-mediated vaporization, they released the drugs, thereby implementing effective targeting into the tumor. The tumor inhibition of the group in which curcumin-loaded nanodroplets were combined with ultrasound was 71.30%, more than that of the group of curcumin-loaded nanodroplets (53.00%). Nanodroplets showed high enhancement of anti-cancer effects under ultrasound. Upon intravenous injection, a long-lasting, strong and selective ultrasound contrast was observed, suggesting their coalescence into larger, highly echogenic microbubbles. These multifunctional nanodroplets, which manifest excellent therapeutic and ultrasound properties, could be promising anti-cancer drug delivery systems.

Development and characterization of lyophilized diazepam-loaded polymeric micelles

Polymeric micelles were studied as delivery carriers of diazepam, a practically insoluble drug in water, for rectal administration. The diazepam-loaded polymeric micelles were developed by using poloxamer 407 (P407), poloxamer 188, and D-α-tocopheryl poly(ethylene glycol) 1000 succinate (TPGS). Among the used polymers, TPGS resulted in polymeric micelles with good characteristics for encapsulation of diazepam which had the small particle size of 8-12 nm and narrow size distribution (PI 0.053-0.275). Additionally, 7.5% w/v of TPGS could entirely entrap the desired concentration of diazepam (5 mg/mL). To improve the physical stability upon lyophilization, an addition of P407 of 1% w/v prevented aggregation, increased physical stability, and maintained chemical stability of the lyophilized powders of diazepam-loaded polymeric micelles for 3 months storage at 4°C. The rate and amount of diazepam release from TPGS polymeric micelles mainly depended on the concentration of TPGS. The release data were fitted to Higuchi's model suggesting that the drug release mechanism was controlled by Fickian diffusion. In conclusion, 10% w/v TPGS and 1% w/v P407 were the optimum formulation of lyophilized diazepam-loaded polymeric micelles.

Role of Branching of Hydrophilic Domain on Physicochemical Properties of Amphiphilic Macromolecules

A novel series of amphiphilic macromolecules (AMs) composed of a sugar backbone, aliphatic chains, and branched, hydrophilic poly(oligoethylene glycol) methyl ether methacrylate (POEGMA)were developed for drug delivery applications. The branched, hydrophilic domains (POEGMA homopolymers with one hydroxyl group) were prepared via atom transfer radical polymerization (ATRP) of oligo(ethylene glycol) methyl ether methacrylate (OEGMA) monomers using 2-hydroxyethyl-2-bromoisobutyrate (HEBiB) as an initiator and copper bromide/bipyridine (CuBr/Bpy) as the catalyst system. To form the amphiphilic structures, the branched POEGMAs were coupled to hydrophobic domains that were formed via acylation of a sugar backbone. The impact of branching in the hydrophilic domain was investigated by comparing the AMs' solution and thermal properties with those of the linear counterparts. Although these highly branched AMs showed similar critical micelle concentration (CMC) values as compared to linear analogues, they possessed quite low glass transition (T_g ) temperatures. Consequently, these novel AMs with branched hydrophilic domain combine the desirable thermal properties of POEGMA with favorable solution properties of amphiphilic architectures, which make them suitable for injectable drug delivery systems.

Micropatterned co-culture of hepatocyte spheroids layered on non-parenchymal cells to understand heterotypic cellular interactions

Microfabrication and micropatterning techniques in tissue engineering offer great potential for creating and controlling cellular microenvironments including cell-matrix interactions, soluble stimuli and cell-cell interactions. Here, we present a novel approach to generate layered patterning of hepatocyte spheroids on micropatterned non-parenchymal feeder cells using microfabricated poly(ethylene glycol) (PEG) hydrogels. Micropatterned PEG-hydrogel-treated substrates with two-dimensional arrays of gelatin circular domains (ϕ = 100 μm) were prepared by photolithographic method. Only on the critical structure of PEG hydrogel with perfect protein rejection, hepatocytes were co-cultured with non-parenchymal cells to be led to enhanced hepatocyte functions. Then, we investigated the mechanism of the functional enhancement in co-culture with respect to the contributions of soluble factors and direct cell-cell interactions. In particular, to elucidate the influence of soluble factors on hepatocyte function, hepatocyte spheroids underlaid with fibroblasts (NIH/3T3 mouse fibroblasts) or endothelial cells (BAECs: bovine aortic endothelial cells) were compared with physically separated co-culture of hepatocyte monospheroids with NIH3T3 or BAEC using trans-well culture systems. Our results suggested that direct heterotypic cell-to-cell contact and soluble factors, both of these between hepatocytes and fibroblasts, significantly enhanced hepatocyte functions. In contrast, direct heterotypic cell-to-cell contact between hepatocytes and endothelial cells only contributed to enhance hepatocyte functions. This patterning technique can be a useful experimental tool for applications in basic science, drug screening and tissue engineering, as well as in the design of artificial liver devices.