Interactions of surfactants and fatty acids with lipids

Medium-chain fatty acids and monoglycerides: Nanoarchitectonics-based insights into molecular self-assembly, membrane interactions, and applications

Medium-chain fatty acids (FAs) and monoglycerides (MGs) with saturated 6- to 12‑carbon long tails are single-chain lipid amphiphiles that demonstrate significant application merits. Key examples include their antimicrobial activity against antibiotic-resistant bacteria and emerging viral threats as well as innovations in oral pharmaceutics and biorenewable chemical production. These diverse functionalities are enabled by FA and MG self-assembly and their interactions with biological membranes. However, an integrated viewpoint connecting interfacial science principles to the broader application scope remains lacking. The objective of this review is to cover the latest progress in medium-chain FA and MG research and to build connections between molecular self-assembly, membrane interactions, and applications. By taking a bottom-up nanoarchitectonics perspective, we first examine molecular self-assembly principles, including ionization properties and formation of colloidal nanostructures such as micelles and vesicles. We then discuss membrane interaction concepts and experimental findings that illustrate how medium-chain FAs and MGs distinctly interact with phospholipid membranes. Based on this foundation, we highlight cutting-edge applications in medicine, agriculture, drug delivery, and sustainability, linking these advances to interfacial science concepts. In addition, we emphasize the growing convergence of experimental, theoretical, and computational approaches and offer a forward-looking perspective on future research needs and application opportunities.

Ecotoxicological Effects of the Anionic Surfactant Sodium Dodecyl Sulfate (SDS) in Two Marine Primary Producers: Phaeodactylum tricornutum and Ulva lactuca

Sodium Dodecyl Sulfate (SDS) is an anionic surfactant, extensively used in detergents, household and personal care products, as well as in industrial processes. The present study aimed to disclose the potential toxicological effects of SDS exposure under environmentally relevant concentrations (0, 0.1, 1, 3, and 10 mg L^-1) on the physiology and biochemistry (photosynthesis, pigment, and lipid composition, antioxidative systems, and energy balance) of two marine autotrophs: the diatom Phaeodactylum tricornutum and the macroalgae Ulva lactuca. A growth rate (GR) reduction in P. tricornutum was observed with a classic dose-response effect towards the highest applied concentration, while a GR increase occurred in U. lactuca. Regarding photochemistry, the decrease in the fluorescence of the OJIP curves and laser-induced fluorescence allowed a better separation between SDS treatments in U. lactuca compared with P. tricornutum. Although all pigments significantly decreased in U. lactuca at the highest concentrations (except for antheraxanthin), no significant variations occurred in P. tricornutum. On the other hand, changes in fatty acid content were observed in P. tricornutum but not in U. lactuca. In terms of classical biomarker assessment, a dose-effect relationship of individual biomarkers versus SDS dose applied; U. lactuca displayed a higher number of biomarker candidates, including those in distinct metabolic pathways, increasing its usefulness for ecotoxicological applications. By evaluating the potential application of optical and biochemical traits, it was evident that the fatty acid profiles of the different exposure groups are excellent candidates in P. tricornutum, concomitant with the characteristics of this anionic surfactant. On the other hand, the results presented by laser-induced fluorescence and some parameters of PAM fluorometry in U. lactuca may be an advantage in the field, offering non-invasive, fast, easy-to-use, high-throughput screening techniques as excellent tools for ecotoxicology assessment.

Rhamnolipid Nano-Micelles Inhibit SARS-CoV-2 Infection and Have No Dermal or Eye Toxic Effects in Rabbits

Hand hygiene is considered to be the key factor in controlling and preventing infection, either in hospital care settings or in the community. Alcohol-based hand sanitizers are commonly used due to their rapid action and broad spectrum of microbicidal activity, offering protection against bacteria and viruses. However, their frequent administration during COVID-19 pandemic was associated with serious hazards, such as skin toxicity, including irritation, skin dermatitis, skin dryness or cracking, along with peeling redness or itching, with the higher possibility of getting infections. Thus, there is a need to find alternative and novel approaches for hand sanitation. In our previous publications, we reported that rhamnolipids nano-micelles had a comparable antibacterial activity to alcohol-based hand sanitizer and a lower cytotoxicity against human dermal fibroblast cells. In the current study, we investigated the antiviral activity of rhamnolipids nano-micelles against SARS-CoV-2. There was no cytotoxic effect on Vero cells noted at the tested concentrations of rhamnolipids nano-micelles. The rhamnolipids nano-micelles solution at 20, 78, and 312 µg/mL all demonstrated a significant (p < 0.05) decrease of virus infectivity compared to the virus only and the blank vehicle sample. In addition, an acute irritation test was performed on rabbits to further ascertain the biosafety of rhamnolipids nano-micelles. In the eye and skin irritation tests, no degree of irritation was recorded after topical application of rhamnolipids nano-micelles. In addition, histopathological, biomarker, and hematological analyses from animals treated with rhamnolipids nano-micelles were identical to those recorded for untreated animal. From the above, we can conclude that rhamnolipids nano-micelles are a good candidate to be used as a hand sanitizer instead of alcohol-based hand sanitizers. However, they must still be tested in the future among healthcare workers (HCW) in a health care setting to ascertain their antimicrobial efficacy and safety compared to alcohol-based hand sanitizers.

Rhamnolipids Nano-Micelles as a Potential Hand Sanitizer

COVID-19 is a pandemic disease caused by the SARS-CoV-2, which continues to cause global health and economic problems since emerging in China in late 2019. Until now, there are no standard antiviral treatments. Thus, several strategies were adopted to minimize virus transmission, such as social distancing, face covering protection and hand hygiene. Rhamnolipids are glycolipids produced formally by Pseudomonas aeruginosa and as biosurfactants, they were shown to have broad antimicrobial activity. In this study, we investigated the antimicrobial activity of rhamnolipids against selected multidrug resistant bacteria and SARS-CoV-2. Rhamnolipids were produced by growing Pseudomonas aeruginosa strain LeS3 in a new medium formulated from chicken carcass soup. The isolated rhamnolipids were characterized for their molecular composition, formulated into nano-micelles, and the antibacterial activity of the nano-micelles was demonstrated in vitro against both Gram-negative and Gram-positive drug resistant bacteria. In silico studies docking rhamnolipids to structural and non-structural proteins of SARS-CoV-2 was also performed. We demonstrated the efficient and specific interaction of rhamnolipids with the active sites of these proteins. Additionally, the computational studies suggested that rhamnolipids have membrane permeability activity. Thus, the obtained results indicate that SARS-CoV-2 could be another target of rhamnolipids and could find utility in the fight against COVID-19, a future perspective to be considered.

Surfactants: physicochemical interactions with biological macromolecules

Macromolecules are essential cellular components in biological systems responsible for performing a large number of functions that are necessary for growth and perseverance of living organisms. Proteins, lipids and carbohydrates are three major classes of biological macromolecules. To predict the structure, function, and behaviour of any cluster of macromolecules, it is necessary to understand the interaction between them and other components through basic principles of chemistry and physics. An important number of macromolecules are present in mixtures with surfactants, where a combination of hydrophobic and electrostatic interactions is responsible for the specific properties of any solution. It has been demonstrated that surfactants can help the formation of helices in some proteins thereby promoting protein structure formation. On the other hand, there is extensive research towards the use of surfactants to solubilize drugs and pharmaceuticals; therefore, it is evident that the interaction between surfactants with macromolecules is important for many applications which includes environmental processes and the pharmaceutical industry. In this review, we describe the properties of different types of surfactants that are relevant for their physicochemical interactions with biological macromolecules, from macromolecules–surfactant complexes to hydrophobic and electrostatic interactions.

How to accurately assess surfactant biodegradation-impact of sorption on the validity of results

Surfactants not only are widely used in biotechnological processes but also constitute significant contaminants of the modern world. Among many reports, there is a shortage of works which summarize the issue of surfactant sorption to biomass in a way that would elucidate the biological factors for analysts and analytical factors for microbiologists. The main factor, which is not as obvious as one would expect, is associated with the susceptibility of analytical approaches to errors resulting from incorrect handling of biomass. In case of several publications reviewed in the framework of this study, it was not possible to establish whether the decrease of the analytical signal observed by the authors actually resulted from biodegradation of the surfactant. This review emphasizes the necessity to consider the possibility of surfactant sorption to microbial cells, which may result in significant detection errors as well as conceptual inconsistency. In addition, a reference study regarding representative surfactants (cationic, anionic and non-ionic) as well as yeast, Gram-negative, Gram-positive bacteria, and activated sludge was provided to highlight the possible errors which may arise from disregarding sorption processes when determining degradation of surfactants. This particularly applies to systems which include ionic surfactants and activated sludge as sorption may account for 90% of the observed depletion of the surfactant. Therefore, a systematic approach was proposed in order to improve the credibility of the obtained results. Finally, the need to employ additional procedures was highlighted which may be required in order to verify that the decrease of surfactant concentration results from biodegradation processes.

Assessing the Interactions of Auristatin Derivatives with Mixed Phospholipid-Sodium Dodecyl Sulfate Aggregate Dispersions

The aim of this study was to assess what properties of the pseudostationary phases in electrokinetic capillary chromatography affect the interactions between monomethyl auristatin E (MMAE) and hydrophilically modified structural analogues thereof with various lipophilic phases. MMAE is a widely used cytotoxic agent in antibody-drug conjugates (ADC), which are used as selective biopharmaceutical drugs in the treatment of cancers. MMAE and its derivatives are highly lipophilic, yet they fail to interact with biomimicking phosphatidylcholine-phosphatidylserine liposomes. To reveal what properties affect the interaction of the auristatin derivatives with cell plasma membrane-mimicking vesicles, capillary electrokinetic chromatography was used with four different types of micellar and vesicular pseudostationary phases: pure vesicles, mixed vesicles, mixed micelles, and pure micelles. Vesicular phases were composed of pure phospholipids [dimyristoylphosphatidylcholine (DMPC) and dilauroylphosphatidylcholine (DLPC)] and phospholipid-surfactant mixtures [sodium dodecyl sulfate, (SDS) with DMPC and DLPC] while the micellar phases comprised pure surfactant (SDS) and surfactant-phospholipid mixtures (SDS-DMPC and SDS-DLPC). In addition, differential scanning calorimetry and dynamic light scattering were used to monitor the aggregate composition. Our data shows that the interaction between hydrophobic auristatin derivatives and hydrophobic pseudostationary phases critically depends on the type, size, and hydrogen bonding capability of the pseudostationary phases.

Dynamical Transitions and Diffusion Mechanism in DODAB Bilayer

Dioctadecyldimethylammonium bromide (DODAB), a potential candidate for applications in drug transport or DNA transfection, forms bilayer in aqueous media exhibiting a rich phase behavior. Here, we report the detailed dynamical features of DODAB bilayer in their different phases (coagel, gel and fluid) as studied by neutron scattering techniques. Elastic intensity scans show dynamical transitions at 327 K in the heating and at 311 K and 299 K during cooling cycle. These results are consistent with calorimetric studies, identified as coagel-fluid phase transition during heating, and fluid-gel and gel-coagel phase transitions during cooling. Quasielastic Neutron Scattering (QENS) data analysis showed presence of only localized internal motion in the coagel phase. However, in the gel and fluid phases, two distinct motions appear, namely lateral motion of the DODAB monomers and a faster localized internal motion of the monomers. The lateral motion of the DODAB molecule is described by a continuous diffusion model and is found to be about an order of magnitude slower in the gel phase than in the fluid phase. To gain molecular insights, molecular dynamics simulations of DODAB bilayer have also been carried out and the results are found to be in agreement with the experiment.

Evaluation of eco-friendly zwitterionic detergents for enveloped virus inactivation

Inclusion of a detergent in protein biotherapeutic purification processes is a simple and very robust method for inactivating enveloped viruses. The detergent Triton X-100 has been used for many years and is part of the production process of several commercial therapeutic proteins. However, recent ecological studies have suggested that Triton X-100 and its break-down products can potentially behave as endocrine disrupters in aquatic organisms, raising concerns from an environmental impact perspective. As such, discharge of Triton X-100 into the waste water treatment plants is regulated in some jurisdictions, and alternative detergents for viral inactivation are required. In this work, we report on the identification and evaluation of more eco-friendly detergents as viable replacements for Triton X-100. Five detergent candidates with low to moderate environmental impact were initially identified and evaluated with respect to protein stability, followed by proof-of-concept virus inactivation studies using a model enveloped virus. From the set of candidates lauryldimethylamine N-oxide (LDAO) was identified as the most promising detergent due to its low ecotoxicity, robust anti-viral activity (LRV >4 at validation set-point conditions with X-MuLX), and absence of any negative impact on protein function. This detergent exhibited effective and robust virus inactivation in a broad range of protein concentrations, solution conductivities, pHs, and in several different cell culture fluid matrices. The only process parameter which correlated with reduced virus inactivation potency was LDAO concentration, and then only when the concentration was reduced to below the detergent's critical micelle concentration (CMC). Additionally, this work also demonstrated that LDAO was cleared to below detectable levels after Protein A affinity chromatography, making it suitable for use in a platform process that utilizes this chromatographic mode for protein capture. All these findings suggest that LDAO may be a practical alternative to Triton X-100 for use in protein therapeutic production processes for inactivating enveloped viruses. Biotechnol. Bioeng. 2017;114: 813-820. © 2016 Wiley Periodicals, Inc.

Effect of fatty acids on self-assembly of soybean lecithin systems

With the increasing interest in natural formulations for drug administration and functional foods, it is desirable a good knowledge of the phase behavior of lecithin/fatty acid formulations. Phase structure and properties of ternary lecithin/fatty acids/water systems are studied at 37°C, making emphasis in regions with relatively low water and fatty acid content. The effect of fatty acid saturation degree on the phase microstructure is studied by comparing a fully saturated (palmitic acid, C16:0), monounsaturated (oleic acid, C18:1), and diunsaturated (linoleic acid, C18:2) fatty acids. Phase determinations are based on a combination of polarized light microscopy and small-angle X-ray scattering measurements. Interestingly, unsaturated (oleic acid and linoleic acid) fatty acid destabilizes the lamellar bilayer. Slight differences are observed between the phase diagrams produced by the unsaturated ones: small lamellar, medium cubic and large hexagonal regions. A narrow isotropic fluid region also appears on the lecithin-fatty acid axis, up to 8wt% water. In contrast, a marked difference in phase microsctructure was observed between unsaturated and saturated systems in which the cubic and isotropic fluid phases are not formed. These differences are, probably, a consequence of the high Krafft point of the C16 saturated chains that imply rather rigid chains. However, unsaturated fatty acids result in more flexible tails. The frequent presence of, at least, one unsaturated chain in phospholipids makes it very likely a better mixing situation than in the case of more rigid chains. This swelling potential favors the formation of reverse hexagonal, cubic, and micellar phases. Both unsaturated fatty acid systems evolve by aging, with a reduction of the extension of reverse hexagonal phase and migration of the cubic phase to lower fatty acid and water contents. The kinetic stability of the systems seems to be controlled by the unsaturation of fatty acids.

Hydration Forces Between Lipid Bilayers: A Theoretical Overview and a Look on Methods Exploring Dehydration

Although, many biological systems fulfil their functions under the condition of excess hydration, the behaviour of bound water as well as the processes accompanying dehydration are nevertheless important to investigate. Dehydration can be a result of applied mechanical pressure, lowered humidity or cryogenic conditions. The effort required to dehydrate a lipid membrane at relatively low degree of hydration can be described by a disjoining pressure which is called hydration pressure or hydration force. This force is short-ranging (a few nm) and is usually considered to be independent of other surface forces, such as ionic or undulation forces. Different theories were developed to explain hydration forces that are usually not consistent with each other and which are also partially in conflict with experimental or numerical data.Over the last decades it has been more and more realised that one experimental method alone is not capable of providing much new insight into the world of such hydration forces. Therefore, research requires the comparison of results obtained from the different methods. This chapter thus deals with an overview on the theory of hydration forces, ranging from polarisation theory to protrusion forces, and presents a selection of experimental techniques appropriate for their characterisation, such as X-ray diffraction, atomic force microscopy and even calorimetry.

Solid lipid particles for oral delivery of peptide and protein drugs III - the effect of fed state conditions on the in vitro release and degradation of desmopressin

The effect of food intake on the release and degradation of peptide drugs from solid lipid particles is unknown and was therefore investigated in vitro using different fed state media in a lipolysis model. Desmopressin was used as a model peptide and incorporated into solid lipid particles consisting of trimyristin (TG14), tripalmitin (TG16), and tristearin (TG18), respectively. Fasted state and fed state media with varying phospholipid and bile salt concentrations, as well as fed state media with milk and oleic acid glycerides, respectively, were used as the release media. The presence of oleic acid glycerides accelerated the release of desmopressin significantly from all solid lipid particles both in the presence and absence of lipase. The presence of oleic acid glycerides also reduced the degradation rate of desmopressin, probably due to the interactions between the lipids and the protease or desmopressin. Addition of a medium chain triglyceride, trilaurin, in combination with drug-loaded lipid particles diminished the food effect on the TG18 particles, and trilaurin is therefore proposed to be a suitable excipient for reduction of the food effect. Overall, the present study shows that strategies to reduce food effect, such as adding trilaurin, for lipid particle formulations should be considered as drug release from such formulations might be influenced by the presence of food in the gastrointestinal tract.

Solid lipid particles for oral delivery of peptide and protein drugs II--the digestion of trilaurin protects desmopressin from proteolytic degradation

PURPOSE

To investigate the in vitro release and degradation of desmopressin from saturated triglyceride microparticles under both lipolytic and proteolytic conditions.

METHODS

The release of desmopressin from different solid lipid microparticles in the absence and presence of a microbial lipase and protease was determined. Trilaurin (TG12), trimyristin (TG14), tripalmitin (TG16), and tristearin (TG18) were used as lipid excipients to produce solid lipid microparticles.

RESULTS

In the presence of lipase, the rate of drug release from different lipid particles was in the order of TG14 > TG16 > TG18, which is the same rank order as the lipid degradation rate. A reverse rank order was found for the protection of desmopressin from enzymatic degradation due to spatial separation of desmopressin from the protease. TG12 accelerated the release of desmopressin from all lipid particles when added as either drug-free microparticles to the lipolysis medium or incorporated in TG16 particles. Additionally, TG12 particles protected desmopressin from degradation when present in the lipolysis medium with the other lipid microparticles.

CONCLUSIONS

TG12 is a very interesting lipid for oral lipid formulations containing peptides and proteins as it alters release and degradation of the incorporated desmopressin. The present study demonstrates the possibility of bio-relevant in vitro evaluation of lipid-based solid particles.

Structure and phase equilibria of the soybean lecithin/PEG 40 monostearate/water system

PEG stearates are extensively used as emulsifiers in many lipid-based formulations. However, the scheme of the principles of the lipid-surfactant polymer interactions are still poorly understood and need more studies. A new phase diagram of a lecithin/PEG 40 monostearate/water system at 30 °C is reported. First, we have characterized the binary PEG 40 monostearate/water system by the determination of the critical micelle concentration value and the viscous properties. Then, the ternary phase behavior and the influence of phase structure on their macroscopic properties are studied by a combination of different techniques, namely, optical microscopy, small-angle X-ray scattering, differential scanning calorimetry, and rheology. The phase behavior is complex, and some samples evolve even at long times. The single monophasic regions correspond to micellar, swollen lamellar, and lamellar gel phases. The existence of extended areas of phase coexistence (hexagonal, cubic, and lamellar liquid crystalline phases) may be a consequence of the low miscibility of S40P in the lecithin bilayer as well as of the segregation of the phospholipid polydisperse hydrophobic chains. The presence of the PEG 40 monostearate has less effect in the transformation to the cubic phase for lecithin than that found in other systems with simple glycerol-based lipids.

Morphological and nanomechanical behavior of supported lipid bilayers on addition of cationic surfactants

The addition of surfactants to lipid bilayers is important for the modulation of lipid bilayer properties (e.g., in protein reconstitution and development of nonviral gene delivery vehicles) and to provide insight on the properties of natural biomembranes. In this work, the thermal behavior, organization, and nanomechanical stability of model cationic lipid-surfactant bilayers have been investigated. Two different cationic surfactants, hexadecyltrimethylammonium bromide (CTAB) and a novel derivative of the amino acid serine (Ser16TFAc), have been added (up to 50 mol %) to both liposomes and supported lipid bilayers (SLBs) composed by the zwitterionic phospholipid DPPC. The thermal phase behavior of mixed liposomes has been probed by differential scanning calorimetry (DSC), and the morphology and nanomechanical properties of mixed SLBs by atomic force microscopy-based force spectroscopy (AFM-FS). Although DSC thermograms show different results for the two mixed liposomes, when both are deposited on mica substrates similar trends on the morphology and the mechanical response of the lipid-surfactant bilayers are observed. DSC thermograms indicate microdomain formation in both systems, but while CTAB decreases the degree of organization on the liposome bilayer, Ser16TFAc ultimately induces the opposite effect. Regarding the AFM-FS studies, they show that microphase segregation occurs for these systems and that the effect is dependent on the surfactant content. In both SLB systems, different microdomains characterized by their height and breakthrough force Fb are formed. The molecular organization and composition is critically discussed in the light of our experimental results and literature data on similar lipid-surfactant systems.

Temperature-dependent structural changes on DDAB surfactant assemblies evidenced by energy dispersive X-ray diffraction and dynamic light scattering

Cationic amphiphile DDAB (dimethyl-dioctadecyl-ammonium-bromide) can spontaneously form water-dispersed and solid supported mimicking biomembrane structures as well as valuable DNA delivery vehicles whose shape, stability and transfection efficiency can be easily optimized on varying temperature, water content and chemical composition. In this framework, disclosing the thermotropic behavior of DDAB assemblies can be considered as an essential step in conceiving and developing new non-viral vector systems. Our work has been focused primarily on understanding the mesophase structure of silicon supported DDAB thin film on varying temperature at constant relative humidity by energy dispersive X-ray diffraction (EDXD). Diffraction results have then been employed in providing a more comprehensive dynamic light scattering (DLS) analysis of corresponding thermotropic water dispersed vesicles made up of DDAB alone and in combination with helper lecithin DOPC (1,2-dioleoyl-sn-glycero-3-phosphatidylcholine) liposomes. We found that above 55 °C silicon-supported DDAB films undergo a significant thinning effect, whilst DDAB-water vesicles exhibit a reduction in size polydispersity. Upon cooling to 25 °C a distinct silicon supported DDAB mesophase, exhibiting a relative humidity-dependent spacing, has been pointed out, and modeled in terms of a lyotropic metastable gel-crystalline phase.DDAB/DOPC-water vesicles show a temperature-dependent switching in size distribution, leading to promising biomedical applications.

Phase diagram of mixed monolayers of stearic acid and dimyristoylphosphatidylcholine. Effect of the acid ionization

The aim of this work is to study the phase diagram of mixed monolayers composed of dimyristoylphosphatidylcholine (DMPC) and stearic acid (SA) at different ionic strength and bulk pH of the aqueous subphase. In this way, the effect of ionization of SA on the interaction and thus on phase separation with the DMPC matrix can be analyzed. To this purpose, we first determined the ionization state of pure SA monolayers as a function of the bulk subphase pH. The SA monolayers are nearly fully ionized at pH 10 and essentially neutral at pH 4 and the mixture of DMPC and SA was studied at those two pHs. We found that the DMPC-enriched phase admits more SA if the SA monolayer is in a liquid-expanded state, which is highly related to the acid ionization state, and thus to the bulk pH and ionic strength. At pH 4 the molecules hardly mix while at pH 10 the mixed monolayer with DMPC can admit between 30 and 100% of SA (depending on the lateral pressure) before phase separation is established. The addition of calcium ions to the subphase has a condensing effect on SA monolayers at all pHs and the solubility of SA in the DMPC matrix does not depend on the bulk pH in these conditions. The observed phase diagrams are independent on the manner in which the state of the mixed film is reached and may thus be considered states of apparent equilibrium.

Interaction of n-octyl β,D-glucopyranoside with giant magnetic-fluid-loaded phosphatidylcholine vesicles: direct visualization of membrane curvature fluctuations as a function of surfactant partitioning between water and lipid bilayer

The present study deals with the morphological modifications of giant dioleoyl phosphatidylcholine vesicles (DOPC GUVs) induced by the nonionic surfactant n-octyl β,D-glucopyranoside at sublytic levels, i.e., in the first steps of the vesicle-to-micelle transition process, when surfactant inserts into the vesicle bilayer without disruption. Experimental conditions were perfected to exactly control the surfactant bilayer composition of the vesicles, in line with former work focused on the mechanical properties of the membrane of magnetic-fluid-loaded DOPC GUVs submitted to a magnetic field. The purpose here was to systematically examine, in the absence of any external mechanical constraint, the dynamics of giant vesicle shape and membrane deformations as a function of surfactant partitioning between the aqueous phase and the lipid membrane, beforehand established by turbidity measurements from small unilamellar vesicles.

Understanding detergent effects on lipid membranes: a model study of lysolipids

Lysolipids and fatty acids are the natural products formed by the hydrolysis of phospholipids. Lysolipids and fatty acids form micelles in solution and acts as detergents in the presence of lipid membranes. In this study, we investigate the detergent strength of a homologous series of lyso-phosphatidylcholine lipids (LPCs) on 1-palmitoyl-2-oleyl-sn-glycerol-3-phosphatidylcholine (POPC) lipid membranes by use of isothermal titration calorimetry and vesicle fluctuation analysis. The membrane partition coefficient (K) and critical micelle concentration (cmc) are determined by isothermal titration calorimetry and found to obey an inverse proportionality relation (cmc.K approximately 0.05-0.3). The partition coefficient and critical micelle concentration are used for the analysis of the effect of LPCs on the membrane bending rigidity. The dependency of the bending rigidity on LPC membrane coverage has been analyzed in terms of a phenomenological model based on continuum elastic theory, which yields information about the curvature-inducing properties of the LPC molecule. The results reveal: 1), an increase in the partition coefficient with increasing LPC acyl-chain length; and 2), that the degree of acyl-chain mismatch between LPC and POPC determines the magnitude of the membrane mechanical perturbation per LPC molecule in the membrane. Finally, the three-stage model describing detergent membrane interaction has been extended by a parameter D(MCI), which governs the membrane curvature stability in the detergent concentration range below the cmc-value of the LPC molecule.

Spontaneous vesicle formation in catanionic mixtures of amino acid-based surfactants: chain length symmetry effects

The use of amino acids for the synthesis of novel surfactants with vesicle-forming properties potentially enhances the biocompatibility levels needed for a viable alternative to conventional lipid vesicles. In this work, the formation and characterization of catanionic vesicles by newly synthesized lysine- and serine-derived surfactants have been investigated by means of phase behavior mapping and PFG-NMR diffusometry and cryo-TEM methods. The lysine-derived surfactants are double-chained anionic molecules bearing a pseudogemini configuration, whereas the serine-derived amphiphile is cationic and single-chained. Vesicles form in the cationic-rich side for narrow mixing ratios of the two amphiphiles. Two pairs of systems were studied: one symmetric with equal chain lengths, 2C12/C12, and the other highly asymmetric with 2C8/C16 chains, where the serine-based surfactant has the longest chain. Different mechanisms of the vesicle-to-micelle transition were found, depending on symmetry: the 2C12/C12 system entails limited micellar growth and intermediate phase separation, whereas the 2C8/C16 system shows a continuous transition involving large wormlike micelles. The results are interpreted on the basis of currently available models for the micelle-vesicle transitions and the stabilization of catanionic vesicles (energy of curvature vs mixing entropy).

Passive diffusion of polymeric surfactants across lipid bilayers

Self-assembling polymeric surfactant, mmePEG(750)P(CL-co-TMC) [monomethylether poly(ethylene glycol)(750)-poly(caprolactone-co-trimethylene carbonate)], increases drug solubility and crosses an enterocyte monolayer both in vitro and in vivo. The aims of the present work were to investigate whether mmePEG(750)P(CL-co-TMC) polymers can diffuse passively through lipid bilayer using parallel artificial membrane permeability assay (PAMPA) and affect membrane properties using liposomes as model. The mmePEG(750)P(CL-co-TMC) polymer was able to cross by passive diffusion an enterocyte-mimicking membrane in PAMPA at concentration which did not perturb membrane integrity. A weak rigidification associated with a low increase in permeability of liposomal lipid bilayers was observed. These data suggest that polymeric surfactants can cross the lipid membrane by passive diffusion and interact with lipid bilayers.

Synchrotron SAX and WAX diffraction study of a hydrated very long-chain, dendritic amphiphile+DPPC mixture

The tri-headed anionic dendritic amphiphile, 4-(2-carboxyethyl)-4-[(icosyloxycarbonyl)amino]heptanedioic acid (3CCb20), forms mixed aggregates with dipalmitoylphosphatidylcholine (DPPC) in excess water at 3CCb20:DPPC = 0.91:1 molar ratio. On heating, these mixed aggregates transform into fluid bilayers stacked in the liquid crystalline lamellar L(alpha) phase at about 40 degrees C. This phase transition and the microstructure of 3CCb20 + DPPC aggregates were studied with small- and wide-angle synchrotron X-ray diffraction. The ability of 3CCb20 to solubilize solidlike lipid bilayers could contribute to the antimicrobial activities of 3CCb20, including its anti-HIV activity.

Self-Assembly in a Catanionic Mixture with an Aminoacid-Derived Surfactant: From Mixed Micelles to Spontaneous Vesicles

The aqueous self-assembly of a novel lysine-derived surfactant with a gemini-like architecture, designated here as 12-Lys-12, has been experimentally investigated for the amphiphile alone in water and in a mixture with dodecyltrimethylammonium bromide (DTAB). The neat surfactant forms interesting micrometer-sized rigid tubules in the dilute region, resulting in very viscous solutions. For the catanionic mixture with DTAB, various single and multiphase regions were identified (up to a total surfactant concentration of 1.5 wt %) by means of combined polarizing light microscopy, cryo-TEM, and NMR. In the DTAB-rich side, for a mixing molar ratio in the range 2 < DTAB/12-Lys-12 < 4, a region of stable, unilamellar vesicles can be found. Furthermore, it was found that upon addition of 12-Lys-12 to pure DTAB solutions, the mixed micelles grow and beyond a given mixing ratio, vesicles assemble and coexist with small micelles. The transition is not continuous, since there is a narrow mixing range where phase separation occurs. Self-diffusion measurements and cryo-TEM imaging show that the average vesicle radius is on the order of 30-40 nm.

A long ripple phase in DLPC–decylglucoside mixture evidenced by synchrotron SAXS coupled to DSC

For the first time, the secondary ripple phase in a system containing dilauroyl phosphatidylcholine (DLPC) is observed by small-angle X-ray diffraction (SAXS). The SAXS profile exhibits many well-resolved peaks. The fast formation of this phase upon cooling from the liquid crystalline lamellar phase L(alpha) is induced by addition of C10G with molar ratio 0.17< or = R = [C10G]/[DLPC]< or = 0.49. For R < 0.17, the primary P(beta') ripple phase is observed. In contrast to the P(beta') phase, which shows a sawtooth shape, the secondary ripple structure is thought to be symmetric. The ripple length (190 angstroms) and the bilayer spacing (74 angstroms) are larger than in the primary ripple phase. Lattice parameters of the new long ripple phase, which are quite insensitive to temperature, vary slightly linearly with R. In this study, structural and thermodynamic changes within the samples were followed as a function of temperature by time-resolved X-ray diffraction coupled to DSC.

Permeability and thermodynamics study of quaternary ammonium surfactants—phosphocholine vesicle system

Quaternary ammonium compounds (QACs) are recognized as membrane active agents widely used as biocides. The main purpose of this work was to investigate the influence of the QAC head group and acyl chain length on their permeability-perturbing power and on their affinity for lipidic membranes. Permeability perturbations were assessed by measuring the release of calcein entrapped inside vesicles. The affinity of QACs for bilayers was investigated by isothermal titration calorimetry (ITC). QACs bearing C(16) chain were found to be more efficient to decrease the membrane permeability than their C(12) analogues. On the other hand, the chemical nature of the ammonium head group has practically no influence on the permeability perturbations caused by QACs bearing C(16) chains. It was difficult to assess the partitioning of the QACs between the aqueous and lipid phases since the ITC signals could also be associated to morphological changes such as vesicle aggregation. For the systems for which reliable thermodynamic parameters could be obtained, the Gibbs energy of transfer was similar to that for the micellization. The entropy variation represented the main contribution to the Gibbs energy, indicating that the insertion of QACs inside lipidic bilayers is driven by hydrophobic interactions.

Segregation and phase transition in mixed lipid films

Energy dispersion X-ray diffraction (EDXD) was applied to investigate the structure of partly dehydrated mixed films formed by the phospholipid dimyristoyl phosphatidylcoline (DMPC) and any of the three diastereomers of the dicationic gemini surfactant (2S,3S)-2,3-dimethoxy-1,4-bis(N-hexadecyl-N,N-dimethylammonium) butane dibromide. As the surfactant to lipid molar ratio (R(S/L)) increases, the gemini monotonically solubilizes the lipid bilayer promoting the formation of a cubic phase of space group Pmn segregating from the residual lamellar phase of the lipid. Finally, at R(S/)(L) = 1, the phase transition is complete. The mixed film at the highest surfactant to lipid molar ratio (R(S/L) = 2.3) was hydrated by a vapor saturated atmosphere. At full hydration, a cubic to lamellar phase transition occurs. Coarse grain dynamic investigations, carried out as a function of both the surfactant to lipid molar ratio and the number of water molecules for amphiphile unit, allowed us to elucidate the structure of the emerging cubic phase and the hydration-induced structural pathway of the cubic to lamellar phase transition observed by EDXD.

DNA release from lipoplexes by anionic lipids: correlation with lipid mesomorphism, interfacial curvature, and membrane fusion

DNA release from lipoplexes is an essential step during lipofection and is probably a result of charge neutralization by cellular anionic lipids. As a model system to test this possibility, fluorescence resonance energy transfer between DNA and lipid covalently labeled with Cy3 and BODIPY, respectively, was used to monitor the release of DNA from lipid surfaces induced by anionic liposomes. The separation of DNA from lipid measured this way was considerably slower and less complete than that estimated with noncovalently labeled DNA, and depends on the lipid composition of both lipoplexes and anionic liposomes. This result was confirmed by centrifugal separation of released DNA and lipid. X-ray diffraction revealed a clear correlation of the DNA release capacity of the anionic lipids with the interfacial curvature of the mesomorphic structures developed when the anionic and cationic liposomes were mixed. DNA release also correlated with the rate of fusion of anionic liposomes with lipoplexes. It is concluded that the tendency to fuse and the phase preference of the mixed lipid membranes are key factors for the rate and extent of DNA release. The approach presented emphasizes the importance of the lipid composition of both lipoplexes and target membranes and suggests optimal transfection may be obtained by tailoring lipoplex composition to the lipid composition of target cells.

Emulsified microemulsions and oil-containing liquid crystalline phases

Self-assembled nanostructures, such as inverted type mesophases of the cubic or hexagonal geometry or reverse microemulsion phases, can be dispersed using a polymeric stabilizer, such as the PEO-PPO-PEO triblock copolymer Pluronic F127. The particles, which are described in the present study, are based on monolinolein (MLO)-water mixtures. When adding tetradecane (TC) to the MLO-water-F127 system at constant temperature, the internal nanostructure of the kinetically stabilized particles transforms from a Pn3m (cubosomes) to a H2 (hexosomes) and to a water-in-oil (W/O, L2) microemulsion phase (emulsified microemulsion (EME)). To our knowledge, this is the first time that the formation of stable emulsified microemulsion (EME) systems has been described and proven to exist even at room temperature. The same structural transitions can also be induced by increasing temperature at constant tetradecane content. The internal nanostructure of the emulsified particles is probed using small-angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (cryo-TEM). At each investigated composition and temperature, the internal structure of the dispersions is observed to be identical to the corresponding structure of the nondispersed, fully hydrated bulk phase. This is clear evidence for the fact that the self-assembled inner particle nanostructure is preserved during the dispersion procedure. In addition, the internal structure of the particles is in thermodynamic equilibrium with the surrounding water phase. The internal structure of the dispersed, kinetically stabilized particles is a "real" and stable self-assembled nanostructure. To emphasize this fact, we denoted this new family of colloidal particles (cubosomes, hexosomes, and EMEs) as "ISASOMES" (internally self-assembled particles or "somes").

Mixing of perfluorinated carboxylic acids with dipalmitoylphosphatidylcholine

Perfluorinated acids are emerging as an important class of persistent environmental pollutant, thus raising human health concerns. To understand the behavior of these compounds in biological systems, the mixing behavior of two perfluorinated acids, perfluorododecanoic and perfluorotetradecanoic acid, with dipalmitoylphosphatidylcholine (DPPC) was studied in monolayers at the air-water interface and in fully hydrated DPPC bilayers. The mixing behavior of both acids was indicative of an attractive interaction and partial miscibility with DPPC at the air-water interface. In the bilayer studies, the fluorinated acids cause peak broadening and elimination of the pretransition of DPPC. The onset temperature of the main phase transition remains constant in the presence of the fluorinated acids suggesting immiscibilities in the gel phase. Below X(DPPC) = 0.97 significant peak broadening of the main phase transition can be observed. These results suggest strong interaction between the respective acid and DPPC, and that both acids are able to partition into the lipid bilayer. However, their mixing behavior is far from ideal, thus suggesting the presence of domains or lipid aggregates with high acid concentrations which may (adversely) impact the function of biological mono- and bilayers.

Evidence of surfactant-induced formation of transient pores in lipid bilayers by using magnetic-fluid-loaded liposomes

It is often assumed that surfactant-induced permeability of lipid membranes obeys a pore-formation mechanism, but, to date, this has not been totally proven. A novel approach is developed using a magnetic fluid composed of calibrated nanocrystals of maghemite (gamma-Fe2O3) as a permeability marker. It is shown that low amounts of surfactant molecules catalyze the transient opening of unilamellar phospholipid vesicles which permit the passage of 8 nm maghemite nanospheres before closing up.

An index of lipid phase diagrams

There is a growing awareness of the utility of lipid phase behavior data in studies of membrane-related phenomena. Such miscibility information is commonly reported in the form of temperature-composition (T-C) phase diagrams. The current index is a conduit to the relevant literature. It lists lipid phase diagrams, their components and conditions of measurement, and complete bibliographic information. The main focus of the index is on lipids of membrane origin where water is the dispersing medium. However, it also includes records on acylglycerols, fatty acids, cationic lipids, and detergent-containing systems. The miscibility of synthetic and natural lipids with other lipids, with water, and with biomolecules (proteins, nucleic acids, carbohydrates, etc.) and non-biological materials (drugs, anesthetics, organic solvents, etc.) is within the purview of the index. There are 2188 phase diagram records in the index, the bulk (81%) of which refers to binary (two-component) T-C phase diagrams. The remainder is made up of more complex (ternary, quaternary) systems, pressure-T phase diagrams, and other more exotic miscibility studies. The index covers the period from 1965 through to July, 2001.