A novel gene delivery system in plants with calcium alginate micro-beads

Polymer-Based Nanoparticles for Inner Ear Targeted Trans Differentiation Gene Therapy

Hearing loss is a significant disability that often goes under recognised, largely due to poor identification, prevention, and treatment. Steps are being made to amend these pitfalls in the investigation of hearing loss, however, the development of a cure to reverse advanced forms remains distant. This review details some current advances in the treatment of hearing loss, with a particular focus on genetic-based nanotechnology and how it may provide a useful avenue for further research. This review presents a broad background on the pathophysiology of hearing loss and some current interventions. We also highlight some potential genes that may be useful in the amelioration of hearing loss. Pathways of cellular differentiation from stem or supporting cell to functional hair cell are covered in detail, as this mechanism represents a key means of regenerating these cell types. Overall, we believe that polymer-based nanotechnology coupled with novel excipients represents a useful area of further research in the treatment of hearing loss, although further studies in this area are required.

Novel Nanoencapsulation Technology and its Potential Role in Bile Acid-Based Targeted Gene Delivery to the Inner Ear

Hearing loss impacts a large proportion of the global population. Damage to the inner ear, in particular the sensitive hair cells, can impact individuals for the rest of their lives. There are very limited options for interventions after damage to these cells has occurred. Targeted gene delivery may provide an effective means to trigger appropriate differentiation of progenitor cells for effective replacement of these sensitive hair cells. There are several hurdles that need to be overcome to effectively deliver these genes. Nanoencapsulation technology has previously been used for the delivery of pharmaceuticals, proteins and nucleic acids, and may provide an effective means of delivering genes to trigger appropriate differentiation. This review investigates the background of hearing loss, current advancements and pitfalls of gene delivery, and how nanoencapsulation may be useful.

Immunization with a bicistronic DNA vaccine modulates systemic IFN-γ and IL-10 expression against Vibrio cholerae infection

Introduction. Cholera is an acute enteric infection caused by Vibrio cholerae, particularly in areas lacking access to clean water. Despite the global effort to improve water quality in these regions, the burden of cholera in recent years has not yet declined. Interest has therefore extended in the use of bicistronic DNA vaccine encoding ctxB and tcpA genes of V. cholerae as a potential vaccine.Hypothesis/Gap Statement. The potential of a bicistronic DNA vaccine, pVAX-ctxB-tcpA has not been determined in vitro and in vivo.Aim. The goal of present study was to evaluate in vitro expression and in vivo potential of pVAX-ctxB-tcpA vaccine against V. cholerae.Methodology. The pVAX-ctxB-tcpA was transiently transfected into mammalian COS-7 cells, and the in vitro expression was assessed using fluorescence and Western blot analyses. Next, the vaccine was encapsulated into sodium alginate using water-in-oil emulsification and evaluated for its efficiency in different pH conditions. Subsequently, oral vaccination using en(pVAX-ctxB-tcpA) was performed in vivo. The animals were challenged with V. cholerae O1 El Tor after 2 weeks of vaccination using the Removable Intestinal Tie-Adult Rabbit Diarrhoea (RITARD) model. Following the infection challenge, the rabbits were monitored for evidence of symptoms, and analysed for systemic cytokine expression level (TNF-α, IFN-γ, IL-6 and IL-10) using quantitative real-time polymerase chain reaction.Results. The in vitro expression of pVAX-ctxB-tcpA was successfully verified via fluorescence and Western blot analyses. Meanwhile, in vivo analysis demonstrated that the en(pVAX-ctxB-tcpA) was able to protect the RITARD model against V. cholerae infection due to a lack of evidence on the clinical manifestations of cholera following bacterial challenge. Furthermore, the bicistronic group showed an upregulation of systemic IFN-γ and IL-10 following 12 days of vaccination, though not significant, suggesting the possible activation of both T-helper 1 and 2 types of response. However, upon bacterial challenge, the gene expression of all cytokines did not change.Conclusion. Our findings suggest that the bicistronic plasmid DNA vaccine, pVAX-ctxB-tcpA, showed a potential role in inducing immune response against cholera through upregulation of in vitro gene and protein expression as well as in vivo cytokine gene expression, particularly IFN-γ and IL-10.

Gene delivery strategies for therapeutic proteins production in plants: Emerging opportunities and challenges

There are sharply rising demands for pharmaceutical proteins, however shortcomings associated with traditional protein production methods are obvious. Genetic engineering of plant cells has gained importance as a new strategy for protein production. But most current genetic manipulation techniques for plant components, such as gene gun bombardment and Agrobacterium mediated transformation are associated with irreversible tissue damage, species-range limitation, high risk of integrating foreign DNAs into the host genome, and complicated handling procedures. Thus, there is urgent expectation for innovative gene delivery strategies with higher efficiency, fewer side effect, and more practice convenience. Materials based nanovectors have established themselves as novel vehicles for gene delivery to plant cells due to their large specific surface areas, adjustable particle sizes, cationic surface potentials, and modifiability. In this review, multiple techniques employed for plant cell-based genetic engineering and the applications of nanovectors are reviewed. Moreover, different strategies associated with the fusion of nanotechnology and physical techniques are outlined, which immensely augment delivery efficiency and protein yields. Finally, approaches that may overcome the associated challenges of these strategies to optimize plant bioreactors for protein production are discussed.

Maize transformation: history, progress, and perspectives

Maize functional genomics research and genetic improvement strategies have been greatly accelerated and refined through the development and utilization of genetic transformation systems. Maize transformation is a composite technology based on decades' efforts in optimizing multiple factors involving microbiology and physical/biochemical DNA delivery, as well as cellular and molecular biology. This review provides a historical reflection on the development of maize transformation technology including the early failures and successful milestones. It also provides a current perspective on the understanding of tissue culture responses and their impact on plant regeneration, the pros and cons of different DNA delivery methods, the identification of a palette of selectable/screenable markers, and most recently the development of growth-stimulating or morphogenic genes to improve efficiencies and extend the range of transformable genotypes. Steady research progress in these interdependent components has been punctuated by benchmark reports celebrating the progress in maize transformation, which invariably relied on a large volume of supporting research that contributed to each step and to the current state of the art. The recent explosive use of CRISPR/Cas9-mediated genome editing has heightened the demand for higher transformation efficiencies, especially for important inbreds, to support increasingly sophisticated and complicated genomic modifications, in a manner that is widely accessible. These trends place an urgent demand on taking maize transformation to the next level, presaging a new generation of improvements on the horizon. Once realized, we anticipate a near-future where readily accessible, genotype-independent maize transformation, together with advanced genomics, genome editing, and accelerated breeding, will contribute to world agriculture and global food security.

The effect of improved formulation of chitosan-alginate microcapsules of Bifidobacteria on serum lipid profiles in mice

BACKGROUND

Probiotics have been associated with many beneficial effects in human digestive physiology. The aim of this study was to evaluate the effect of improved formulation of chitosan-alginate microcapsules of Bifidobacterium strains on serum triglycerides, cholesterol, HDL, and LDL in mice.

METHODS

Five approved probiotic strains of Bifidobacterium were tested for anti-proliferative effect and interleukin-8 induction on HT-29 cell lines. Bifidobacterium strains plus five approved Lactobacillus were encapsulated in chitosan-alginate microcapsules and tested for its survival in simulated gastrointestinal conditions. These microcapsules were administered to 4 groups of mice (including 1. Bif (Bifidobacterium strains), 2. Lac (Lactobacillus strains), 3. Bif-Lac (Bifidobacterium plus Lactobacillus strains) and 4. Control) for 8 days. At eighth day, the blood of mice were taken and serum levels of triglycerides, cholesterol, HDL, and LDL of them were determined.

RESULTS

All of the Bifidobacterium strains significantly (P < 0.001) reduced secretion of IL-8 in HT-29 cells as well as maximum antiproliferative effects (P < 0.001). In addition, all microcapsules showed impressive survival rate in bile (>%94.1) and gastrointestinal (>%78.28) conditions (P < 0.05). Only Bif-Lac group displayed significantly lower serum cholesterol and LDL levels than control group (P < 0.05). Besides, all groups indicate statistically significant weight loss of mice during the 8 days in comparison with the control group (P < 0.05).

CONCLUSION

The results of this study showed that the microencapsulated probiotics with alginate and chitosan had an effective mean of delivery of viable bacterial cells and non-pharmacological interventions use to reduce serum cholesterol and LDL levels in in-vivo condition.

Germplasm resources and genetic breeding of Paeonia: a systematic review

Members of the genus Paeonia, which consists of globally renowned ornamentals and traditional medicinal plants with a rich history spanning over 1500 years, are widely distributed throughout the Northern Hemisphere. Since 1900, over 2200 new horticultural Paeonia cultivars have been created by the discovery and breeding of wild species. However, information pertaining to Paeonia breeding is considerably fragmented, with fundamental gaps in knowledge, creating a bottleneck in effective breeding strategies. This review systematically introduces Paeonia germplasm resources, including wild species and cultivars, summarizes the breeding strategy and results of each Paeonia cultivar group, and focuses on recent progress in the isolation and functional characterization of structural and regulatory genes related to important horticultural traits. Perspectives pertaining to the resource protection and utilization, breeding and industrialization of Paeonia in the future are also briefly discussed.

A Short History and Perspectives on Plant Genetic Transformation

Plant genetic transformation is an important technological advancement in modern science, which has not only facilitated gaining fundamental insights into plant biology but also started a new era in crop improvement and commercial farming. However, for many crop plants, efficient transformation and regeneration still remain a challenge even after more than 30 years of technical developments in this field. Recently, FokI endonuclease-based genome editing applications in plants offered an exciting avenue for augmenting crop productivity but it is mainly dependent on efficient genetic transformation and regeneration, which is a major roadblock for implementing genome editing technology in plants. In this chapter, we have outlined the major historical developments in plant genetic transformation for developing biotech crops. Overall, this field needs innovations in plant tissue culture methods for simplification of operational steps for enhancing the transformation efficiency. Similarly, discovering genes controlling developmental reprogramming and homologous recombination need considerable attention, followed by understanding their role in enhancing genetic transformation efficiency in plants. Further, there is an urgent need for exploring new and low-cost universal delivery systems for DNA/RNA and protein into plants. The advancements in synthetic biology, novel vector systems for precision genome editing and gene integration could potentially bring revolution in crop-genetic potential enhancement for a sustainable future. Therefore, efficient plant transformation system standardization across species holds the key for translating advances in plant molecular biology to crop improvement.

Novel nanoplex-mediated plant transformation approach

Here, a rapid and easy transformation by electroporation technique for gene transfer in plants using cell penetrating amino nanocomplex (nanoplex) has been demonstrated in Nicotiana. Nanoplex was prepared using cell penetrating amino acids (CPAs) such as poly-L-lysine (PLL) and Argenine (Arg), in combination with the gold nanoparticles (AuNPs). PLLs-modified nanoplex with zeta potential of 34.2 ± 1.22 mV charge showed 63.3% efficiency for gene transformation in plant cells as compared to 60% when modified with Arg and the zeta potential was found to be 30.0 ± 0.83 mV; whereas, the transformation efficiency without nanoplex was found to be 6.6%. The findings indicate that the zeta potential of positively charged nanocomplex (AuNPs/CPAs/DNA/CPAs) increases the transformation efficiency because of their ability to protect the DNA from electroporation wave and endogenous enzyme damage. Transformation was confirmed by GUS assay and amplification of npt gene. This technique may open up new possibilities of gene transfer in plants, which will enable to produce large number of transgenic plants.

Calcium triggered self-assembly of alginate-graft-POEGMA via RAFT for the encapsulation of lipophillic actives

Self-assembly of alginate into nanoparticles was realized by grafting hydrophilic brushes via RAFT.

A novel injectable thermoresponsive and cytocompatible gel of poly(N-isopropylacrylamide) with layered double hydroxides facilitates siRNA delivery into chondrocytes in 3D culture

Hybrid hydrogels composed of poly(N-isopropylacrylamide) (pNIPAAM) and layered double hydroxides (LDHs) are presented in this study as novel injectable and thermoresponsive materials for siRNA delivery, which could specifically target several negative regulators of tissue homeostasis in cartilaginous tissues. Effectiveness of siRNA transfection using pNIPAAM formulated with either MgAl-LDH or MgFe-LDH platelets was investigated using osteoarthritic chondrocytes. Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) was used as an endogenous model gene to evaluate the extent of silencing. No significant adverse effects of pNIPAAM/LDH hydrogels on cell viability were noticed. Cellular uptake of fluorescently labeled siRNA was greatly enhanced (>75%) in pNIPAAM/LDH hydrogel constructs compared to alginate, hyaluronan and fibrin gels, and was absent in pNIPAAM hydrogel without LDH platelets. When using siRNA against GAPDH, 82-98% reduction of gene expression was found in both types of pNIPAAM/LDH hydrogel constructs after 6 days of culturing. In the pNIPAAM/MgAl-LDH hybrid hydrogel, 80-95% of GAPDH enzyme activity was reduced in parallel with gene. Our findings show that the combination of a cytocompatible hydrogel and therapeutic RNA oligonucleotides is feasible. Thus it might hold promise in treating degeneration of cartilaginous tissues by providing supporting scaffolds for cells and interference with locally produced degenerative factors.

Comparing different methods to fix and to dehydrate cells on alginate hydrogel scaffolds using scanning electron microscopy

Scanning electron microscopy (SEM) is commonly used in the analysis of scaffolds morphology, as well as cell attachment, morphology and spreading on to the scaffolds. However, so far a specific methodology to prepare the alginate hydrogel (AH) scaffolds for SEM analysis has not been evaluated. This study compared different methods to fix/dehydrate cells in AH scaffolds for SEM analysis. AH scaffolds were prepared and seeded with NIH/3T3 cell line; fixed with glutaraldehyde, osmium tetroxide, or the freeze drying method and analyzed by SEM. Results demonstrated that the freeze dried method interferes less with cell morphology and density, and preserves the scaffolds structure. The fixation with glutaraldehyde did not affect cells morphology and density; however, the scaffolds morphology was affected in some level. The fixation with osmium tetroxide interfered in the natural structure of cells and scaffold. In conclusion the freeze drying and glutaraldehyde are suitable methods for cell fixation in AH scaffold for SEM, although scaffolds structure seems to be affected by glutaraldehyde.

A simple and effective method to encapsulate tobacco mesophyll protoplasts to maintain cell viability

Protoplasts have been widely used for genetic transformation, cell fusion, and somatic mutation due to the absence of a cell wall. However, without the protection of a cell wall, protoplasts are easy to rupture and aggregate during washing, collecting, and gene transfection. In this work, we propose a simple and effective silica/alginate two-step method to immobilize protoplasts with advantages in experimental manipulation and microscopic imaging, as well as in potentially studying cell biological processes such as secretion and metabolism. The proposed two-step immobilization method adopts Transwell with clear tissue culture-treated membrane to support protoplasts in the form of uniform thin layer, which has three unique properties.

•

The tissue culture-treated membrane has a good affinity for the plant cell; thus, protoplasts can spread evenly and form a very thin layer.

•

There are more choices for membrane pore size, depending on the application.

•

It is very convenient to change or collect the solution without mechanically disturbing the protoplasts. This simple and effective silica sol–gel/alginate two-step immobilization of protoplasts in Transwell has great potential for applications in genetic transformation, metabolite production, and migration assays.

Bioactive bead-mediated transformation of plants with large DNA fragments

The efficient transformation of plants with large DNA molecules containing a set of useful genes would provide vast possibilities for the genetic improvement of agricultural as well as nonagricultural plants. The development of the bioactive beads (BABs) transformation method has proven useful for introduction of large DNA molecules into plant cells. In this chapter, the BABs transformation method used for the transformation of a 100-kb BAC DNA construct containing wheat genes into rice will be presented. Furthermore, the improved production method for BABs will be described. With the conventional method for producing BABs, the bead size varies, and the larger beads tend to carry fewer DNA molecules than the smaller beads. Thus, in order to facilitate the preparation of BABs with more uniform sizes, a simple set-up -composed of a sine wave sound generator and microsyringe pump was fabricated. Using this bead-maker set-up, uniform and smaller beads could be produced which enhance the transformation efficiency.

Novel synthesis strategies for natural polymer and composite biomaterials as potential scaffolds for tissue engineering

Recent developments in tissue engineering approaches frequently revolve around the use of three-dimensional scaffolds to function as the template for cellular activities to repair, rebuild and regenerate damaged or lost tissues. While there are several biomaterials to select as three-dimensional scaffolds, it is generally agreed that a biomaterial to be used in tissue engineering needs to possess certain material characteristics such as biocompatibility, suitable surface chemistry, interconnected porosity, desired mechanical properties and biodegradability. The use of naturally derived polymers as three-dimensional scaffolds has been gaining widespread attention owing to their favourable attributes of biocompatibility, low cost and ease of processing. This paper discusses the synthesis of various polysaccharide-based, naturally derived polymers, and the potential of using these biomaterials to serve as tissue engineering three-dimensional scaffolds is also evaluated. In this study, naturally derived polymers, specifically cellulose, chitosan, alginate and agarose, and their composites, are examined. Single-component scaffolds of plain cellulose, plain chitosan and plain alginate as well as composite scaffolds of cellulose-alginate, cellulose-agarose, cellulose-chitosan, chitosan-alginate and chitosan-agarose are synthesized, and their suitability as tissue engineering scaffolds is assessed. It is shown that naturally derived polymers in the form of hydrogels can be synthesized, and the lyophilization technique is used to synthesize various composites comprising these natural polymers. The composite scaffolds appear to be sponge-like after lyophilization. Scanning electron microscopy is used to demonstrate the formation of an interconnected porous network within the polymeric scaffold following lyophilization. It is also established that HeLa cells attach and proliferate well on scaffolds of cellulose, chitosan or alginate. The synthesis protocols reported in this study can therefore be used to manufacture naturally derived polymer-based scaffolds as potential biomaterials for various tissue engineering applications.

Bioactive beads-mediated transformation of rice with large DNA fragments containing Aegilops tauschii genes

Transformation with large DNA molecules enables multiple genes to be introduced into plants simultaneously to produce transgenic plants with complex phenotypes. In this study, a large DNA fragment (ca. 100 kb) containing a set of Aegilops tauschii hardness genes was introduced into rice plants using a novel transformation method, called bioactive beads-mediated transformation. Nine transgenic rice plants were obtained and the presence of transgenes in the rice genome was confirmed by PCR and FISH analyses. The results suggested that multiple transgenes were successfully integrated in all transgenic plants. The expression of one of the transgenes, puroindoline b, was confirmed at the mRNA and protein levels in the T(2) generation. Our study clearly demonstrates that the bioactive bead method is capable of producing transgenic rice plants carrying large DNA fragments. This method will facilitate the production of useful transgenic plants by introducing multiple genes simultaneously.

Stabilizing effects of calcium alginate microspheres on mycobacterium bovis BCG intended for oral vaccination

In this study, alginate microspheres containing BCG were prepared at a diameter of approximately 10 microm by emulsification-internal gelation of an alginate-BCG solution dispersed in olive oil using a high rate speed stirrer. The stability of BCG was assayed at 4 degrees C showing that the encapsulated BCG was more stable than free BCG at least for 5 weeks; however, BCG in sodium alginate solution was not stable at all. On the other hand, the studies using media with different pH (1.2, 4.4, 6.2, 6.8 and 7.5) have demonstrated that the alginate microspheres are stable in acidic medium for upto 1.5 h without any sign of disintegration. Moreover, BCG incorporated in alginate microspheres demonstrated an almost 9-fold increase in viable bacilli in simulated gastric fluid (SGF) after 1.5 h in comparison with free BCG.

A novel transfection method for mammalian cells using calcium alginate microbeads

The direct transfer of genetic materials into mammalian cells is an indispensable technique. We have developed calcium alginate (CA) microbeads which can deliver plasmid DNAs and yeast artificial chromosomes into plant and yeast cells. In this paper, we demonstrate the effective transfection of mammalian cells by CA microbeads immobilizing plasmid DNAs. The transfection was performed using the pEGFP-C1 plasmid containing the cytomegalovirus (CMV) promoter and enhanced green fluorescent protein (EGFP) gene. The transient expression of EGFP was observed 24 h after transfection. The expression efficiency was maximum when the concentration of sodium alginate was 1% and the amount of plasmid DNA was increased to 100 microg. The expression efficiency of our method using CA microbeads is 2-10 times higher than that of the polyethylene glycol (PEG) method. Our results suggest that the CA microbead mediated transfection of mammalian cells effectively delivers genetic materials into mammalian suspension cells.