Characteristics of in vitro osteoblastic cell loading models

Hydrodynamic shear stress' impact on mammalian cell properties and its applications in 3D bioprinting

As an effective cell assembly method, three-dimensional bioprinting has been widely used in building organ models and tissue repair over the past decade. However, different shear stresses induced throughout the entire printing process can cause complex impacts on cell integrity, including reducing cell viability, provoking morphological changes and altering cellular functionalities. The potential effects that may occur and the conditions under which these effects manifest are not clearly understood. Here, we review systematically how different mammalian cells respond under shear stress. We enumerate available experimental apparatus, and we categorise properties that can be affected under disparate stress patterns. We also summarise cell damaging mathematical models as a predicting reference for the design of bioprinting systems. We concluded that it is essential to quantify specific cell resistance to shear stress for the optimisation of bioprinting systems. Besides, as substantial positive impacts, including inducing cell alignment and promoting cell motility, can be generated by shear stress, we suggest that we find the proper range of shear stress and actively utilise its positive influences in the development of future systems.

Nanomechanical Mapping of Three Dimensionally Printed Poly-ε-Caprolactone Single Microfibers at the Cell Scale for Bone Tissue Engineering Applications

Poly-ε-caprolactone (PCL) has been widely used in additive manufacturing for the construction of scaffolds for bone tissue engineering. However, its use is limited by its lack of bioactivity and inability to induce cell adhesion, hence limiting bone tissue regeneration. Biomimicry is strongly influenced by the dynamics of cell-substrate interaction. Thus, characterizing scaffolds at the cell scale could help to better understand the relationship between surface mechanics and biological response. We conducted atomic force microscopy-based nanoindentation on 3D-printed PCL fibers of ~300 µm thickness and mapped the near-surface Young's modulus at loading forces below 50 nN. In this non-disruptive regime, force mapping did not show clear patterns in the spatial distribution of moduli or a relationship with the topographic asperities within a given region. Remarkably, we found that the average modulus increased linearly with the logarithm of the strain rate. Finally, a dependence of the moduli on the history of nanoindentation was demonstrated on locations of repeated nanoindentations, likely due to creep phenomena capable of hindering viscoelasticity. Our findings can contribute to the rational design of scaffolds for bone regeneration that are capable of inducing cell adhesion and proliferation. The methodologies described are potentially applicable to various tissue-engineered biopolymers.

Effects of different physical factors on osteogenic differentiation

Osteoblasts are essential for bone formation and can perceive external mechanical stimuli, which are translated into biochemical responses that ultimately alter cell phenotypes and respond to environmental stimuli, described as mechanical transduction. These cells actively participate in osteogenesis and the formation and mineralisation of the extracellular bone matrix. This review summarises the basic physiological and biological mechanisms of five different physical stimuli, i.e. light, electricity, magnetism, force and sound, to induce osteogenesis; further, it summarises the effects of changing culture conditions on the morphology, structure and function of osteoblasts. These findings may provide a theoretical basis for further studies on bone physiology and pathology at the cytological level and will be useful in the clinical application of bone formation and bone regeneration technology.

Fluid Shear Stress Promotes Osteoblast Proliferation and Suppresses Mitochondrial-Mediated Osteoblast Apoptosis Through the miR-214-3p-ATF4 Signaling Axis

MicroRNAs (miRNAs) play vital roles in bone metabolism and participate in the mechanically induced bone alterations. The underlying molecular mechanisms by which fluid shear stress (FSS) regulate the proliferative and apoptotic phenotypic changes of osteoblasts remain elusive. The study aimed to investigate the regulatory effects of FSS on osteoblast proliferative and apoptotic phenotypes and the roles of miR-214-3p-ATF4 (activating transcription factor 4) signaling axis in the mechanomodulation processes. FSS promoted the proliferative activity of osteoblasts and suppressed mitochondrial-mediated osteoblast apoptosis. FSS decreased miR-214-3p expression and increased ATF4 expression in MC3T3-E1 osteoblasts. MiR-214-3p inhibited osteoblast proliferative activity and promoted mitochondrial-mediated osteoblast apoptosis. Overexpression of miR-214-3p attenuated FSS-enhanced osteoblast proliferation and FSS-suppressed mitochondrial-mediated osteoblast apoptosis. We validated that ATF4 acted as a target gene of miR-214-3p. Moreover, miR-214 3p regulated osteoblast proliferation and apoptosis through targeting ATF4. Taken together, our study proved that FSS could suppress mitochondrial-mediated osteoblast apoptosis and promote osteoblast proliferation through the miR-214-3p-ATF4 signaling axis.

The mechanosensory and mechanotransductive processes mediated by ion channels and the impact on bone metabolism: A systematic review

Mechanical environments were associated with alterations in bone metabolism. Ion channels present on bone cells are indispensable for bone metabolism and can be directly or indirectly activated by mechanical stimulation. This review aimed to discuss the literature reporting the mechanical regulatory effects of ion channels on bone cells and bone tissue. An electronic search was conducted in PubMed, Embase and Web of Science. Studies about mechanically induced alteration of bone cells and bone tissue by ion channels were included. Ion channels including TRP family channels, Ca²⁺ release-activated Ca²⁺ channels (CRACs), Piezo1/2 channels, purinergic receptors, NMDA receptors, voltage-sensitive calcium channels (VSCCs), TREK2 potassium channels, calcium- and voltage-dependent big conductance potassium (BK_Ca) channels, small conductance, calcium-activated potassium (SK_Ca) channels and epithelial sodium channels (ENaCs) present on bone cells and bone tissue participate in the mechanical regulation of bone development in addition to contributing to direct or indirect mechanotransduction such as altered membrane potential and ionic flux. Physiological (beneficial) mechanical stimulation could induce the anabolism of bone cells and bone tissue through ion channels, but abnormal (harmful) mechanical stimulation could also induce the catabolism of bone cells and bone tissue through ion channels. Functional expression of ion channels is vital for the mechanotransduction of bone cells. Mechanical activation (opening) of ion channels triggers ion influx and induces the activation of intracellular modulators that can influence bone metabolism. Therefore, mechanosensitive ion channels provide new insights into therapeutic targets for the treatment of bone-related diseases such as osteopenia and aseptic implant loosening.

Adsorption Force of Fibronectin: A Balance Regulator to Transmission of Cell Traction Force and Fluid Shear Stress

Osteoblasts actively generate cell traction force (CTF) to sense chemical and mechanical microenvironments. Fluid shear stress (FSS) is a principle mechanical stimulus for bone modeling/remodeling. FSS and CTF share common interconnected elements for force transmission, among which the role of the protein-material interfacial force (F_ad) remains unclear. Here, we found that, on the low F_ad surface (5.47 ± 1.31 pN/FN), CTF overwhelmed F_ad to partially desorb FN, and FSS exacerbated the desorption, resulting in disassembly of the actin cytoskeleton and focal adhesions (FAs) to reduce CTF and establishment of a new mechanical balance at the FN-material interface. Contrarily, on the high F_ad surface (27.68 ± 5.24 pN/FN), pure CTF or the combination of CTF and FSS induced no FN desorption, and FSS promoted assembly of actin cytoskeletons and disassembly of FAs, regaining new mechanical balance at the cell-FN interface. These results indicate that F_ad is a mechanical regulator for transmission of CTF and FSS, which has never been reported before.

In Vitro Bone Cell Response to Tensile Mechanical Solicitations: Is There an Optimal Protocol?

Bone remodeling is strongly linked to external mechanical signals. Such stimuli are widely used in vitro for bone tissue engineering by applying mechanical solicitations to cell cultures so as to trigger specific cell responses. However, the literature highlights considerable variability in devices and protocols. Here the major biological, mechanical, and technical parameters implemented for in vitro tensile loading applications are reviewed. The objective is to identify which values are used most, and whether there is an optimal protocol to obtain a functional tissue-engineering construct. First, a shift that occurred from fundamental comprehension of bone formation, to its application in rebuilt tissues and clinical fields is shown. Despite the lack of standardized protocols, consensual conditions relevant for in vitro bone development, in particular cell differentiation, could be highlighted. Culture processes are guided by physiological considerations, although out-of-range conditions are sometimes used without implying negative results for the development of rebuilt tissue. Consensus can be found on several parameters, such as strain frequency (1 Hz) or the use of rest periods, but other points have not yet been fully established, especially synergies with other solicitations. It is believed that the present work will be useful to develop new tissue-engineering processes based on stretching.

Techniques to stimulate and interrogate cell-cell adhesion mechanics

Cell-cell adhesions maintain the mechanical integrity of multicellular tissues and have recently been found to act as mechanotransducers, translating mechanical cues into biochemical signals. Mechanotransduction studies have primarily focused on focal adhesions, sites of cell-substrate attachment. These studies leverage technical advances in devices and systems interfacing with living cells through cell-extracellular matrix adhesions. As reports of aberrant signal transduction originating from mutations in cell-cell adhesion molecules are being increasingly associated with disease states, growing attention is being paid to this intercellular signaling hub. Along with this renewed focus, new requirements arise for the interrogation and stimulation of cell-cell adhesive junctions. This review covers established experimental techniques for stimulation and interrogation of cell-cell adhesion from cell pairs to monolayers.

Physiological joint line total knee arthroplasty designs are especially sensitive to rotational placement - A finite element analysis

Mechanical and kinematical aligning techniques are the usual positioning methods during total knee arthroplasty. However, alteration of the physiological joint line and unbalanced medio-lateral load distribution are considered disadvantages in the mechanical and kinematical techniques, respectively. The aim of this study was to analyse the influence of the joint line on the strain and stress distributions in an implanted knee and their sensitivity to rotational mal-alignment. Finite element calculations were conducted to analyse the stresses in the PE-Inlay and the mechanical strains at the bone side of the tibia component-tibia bone interface during normal positioning of the components and internal and external mal-rotation of the tibial component. Two designs were included, a horizontal and a physiological implant. The loading conditions are based on internal knee joint loads during walking. A medialization of the stresses on the PE-Inlay was observed in the physiological implant in a normal position, accompanied by higher stresses in the mal-rotated positions. Within the tibia component-tibia bone interface, similar strain distributions were observed in both implant geometries in the normal position. However, a medialization of the strains was observed in the physiological implant in both mal-rotated conditions with greater bone volume affected by higher strains. Although evident changes due to mal-rotation were observed, the stresses do not suggest a local plastic deformation of the PE-Inlay. The strains values within most of the tibia component-tibia bone interface were in the physiological strain zone and no significant bone changes would be expected. The physiological cut on the articular aspect showed no detrimental effect compared to the horizontal implant.

Computational Investigation on the Biomechanical Responses of the Osteocytes to the Compressive Stimulus: A Poroelastic Model

Osteocytes, the major type of bone cells embedded in the bone matrix and surrounded by the lacunar and canalicular system, can serve as biomechanosensors and biomechanotranducers of the bone. Theoretical analytical methods have been employed to investigate the biomechanical responses of osteocytes in vivo; the poroelastic properties have not been taken into consideration in the three-dimensional (3D) finite element model. In this study, a 3D poroelastic idealized finite element model was developed and was used to predict biomechanical behaviours (maximal principal strain, pore pressure, and fluid velocity) of the osteocyte-lacunar-canalicular system under 150-, 1000-, 3000-, and 5000-microstrain compressive loads, respectively, representing disuse, physiological, overuse, and pathological overload loading stimuli. The highest local strain, pore pressure, and fluid velocity were found to be highest at the proximal region of cell processes. These data suggest that the strain, pore pressure, and fluid velocity of the osteocyte-lacunar-canalicular system increase with the global loading and that the poroelastic material property affects the biomechanical responses to the compressive stimulus. This new model can be used to predict the mechanobiological behaviours of osteocytes under the four different compressive loadings and may provide an insight into the mechanisms of mechanosensation and mechanotransduction of the bone.

The collective influence of 1, 25-dihydroxyvitamin D3 with physiological fluid shear stress on osteoblasts

1, 25-dihydroxyvitamin D₃ (1, 25 (OH)₂ D₃) and mechanical stimuli in physiological environment contributes greatly to osteoporosis pathogenesis. Wide investigations have been conducted on how 1, 25-dihydroxyvitamin D₃ and mechanical stimuli separately impact osteoblasts. This study reports the collective influences of 1, 25-dihydroxyvitamin D₃ and flow shear stress (FSS) on biological functions of osteoblasts. 1, 25 (OH)₂ D₃ were prepared in various kinds of concentrations (0, 1, 10, 100 nmmol/L), while physiological fluid shear stress (12 dynes/cm²) was produced by using a parallel-plate fluid flow system. 1, 25 (OH)₂ D₃ affects the responses of ROBs to FSS, including the inhibition of NO release and cell proliferation as well as the promotion of PGE₂ release and cell differentiation. These findings provide a possible mechanism by which 1, 25(OH)₂ D₃ influences osteoblasts' responses to FSS, thus most probably providing guidance for the selection of 1, 25(OH)₂ D₃ concentration and mechanical loading in order to produce functional bone tissues in vitro.

Creating homogenous strain distribution within 3D cell-encapsulated constructs using a simple and cost-effective uniaxial tensile bioreactor: Design and validation study

Mechanical loading bioreactors capable of applying uniaxial tensile strains are emerging to be a valuable tool to investigate physiologically relevant cellular signaling pathways and biochemical expression. In this study, we have introduced a simple and cost-effective uniaxial tensile strain bioreactor for the application of precise and homogenous uniaxial strains to 3D cell-encapsulated collagen constructs at physiological loading strains (0-12%) and frequencies (0.01-1 Hz). The bioreactor employs silicone-based loading chambers specifically designed to stretch constructs without direct gripping to minimize stress concentration at the ends of the construct and preserve its integrity. The loading chambers are driven by a versatile stepper motor ball-screw actuation system to produce stretching of the constructs. Mechanical characterization of the bioreactor performed through Finite Element Analysis demonstrated that the constructs experienced predominantly uniaxial tensile strain in the longitudinal direction. The strains produced were found to be homogenous over a 15 × 4 × 2 mm region of the construct equivalent to around 60% of the effective region of characterization. The strain values were also shown to be consistent and reproducible during cyclic loading regimes. Biological characterization confirmed the ability of the bioreactor to promote cell viability, proliferation, and matrix organization of cell-encapsulated collagen constructs. This easy-to-use uniaxial tensile strain bioreactor can be employed for studying morphological, structural, and functional responses of cell-embedded matrix systems in response to physiological loading of musculoskeletal tissues. It also holds promise for tissue-engineered strategies that involve delivery of mechanically stimulated cells at the site of injury through a biological carrier to develop a clinically useful therapy for tissue healing. Biotechnol. Bioeng. 2017;114: 1878-1887. © 2017 Wiley Periodicals, Inc.

Surface chemistry regulates the sensitivity and tolerability of osteoblasts to various magnitudes of fluid shear stress

Scaffolds provide a physical support for osteoblasts and act as the medium to transfer mechanical stimuli to cells. To verify our hypothesis that the surface chemistry of scaffolds regulates the perception of cells to mechanical stimuli, the sensitivity and tolerability of osteoblasts to fluid shear stress (FSS) of various magnitudes (5, 12, 20 dynes/cm² ) were investigated on various surface chemistries (-OH, -CH₃ , -NH₂ ), and their follow-up effects on cell proliferation and differentiation were examined as well. The sensitivity was characterized by the release of adenosine triphosphate (ATP), nitric oxide (NO) and prostaglandin E₂ (PGE₂ ) while the tolerability was by cellular membrane integrity. The cell proliferation was characterized by S-phase cell fraction and the differentiation by ALP activity and ECM expression (fibronectin and type I collagen). As revealed, osteoblasts demonstrated higher sensitivity and lower tolerability on OH and CH₃ surfaces, yet lower sensitivity and higher tolerability on NH₂ surfaces. Observations on the focal adhesion formation, F-actin organization and cellular orientation before and after FSS exposure suggest that the potential mechanism lies in the differential control of F-actin organization and focal adhesion formation by surface chemistry, which further divergently mediates the sensitivity and tolerability of ROBs to FSS and the follow-up cell proliferation and differentiation. These findings are essentially valuable for design/selection of desirable surface chemistry to orchestrate with FSS stimuli, inducing appropriate cell responses and promoting bone formation. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2978-2991, 2016.

A-Raf and C-Raf differentially regulate mechanobiological response of osteoblasts to guide mechanical stress-induced differentiation

Regulation of osteoblast activity by mechanical stress is important for bone remodeling. However, the precise mechanotransduction mechanism that triggers the anabolic reaction of osteoblasts is largely unknown. In this study, we performed RNA interference (RNAi) screening to identify the signaling molecules upstream of ERK, which was responsible for osteogenesis. Of twenty-two mitogen-activated protein kinase (MAPK) kinase kinases (MAP3Ks), we identified A-Raf and C-Raf as upstream MAP3Ks of the mechanical stretch-activated ERK pathway. Subsequently we screened the mechanosensitive cation channel, and identified P2X7 as an upstream molecule of the ERK pathway. Intriguingly, P2X7 functioned as an upstream activator of A-Raf but not of C-Raf. Furthermore, A-Raf contributed to mechanical stretch-induced osteoblast differentiation. In contrast, C-Raf but not A-Raf protected osteoblasts from mechanical stretch-induced apoptosis. These results suggested that A-Raf and C-Raf were involved in mechanobiological osteogenesis in a distinct way: A-Raf was responsible for osteogenesis while C-Raf for anti-apoptotic protection and promotion.

Mechanoresponsive musculoskeletal tissue differentiation of adipose-derived stem cells

Musculoskeletal tissues are constantly under mechanical strains within their microenvironment. Yet, little is understood about the effect of in vivo mechanical milieu strains on cell development and function. Thus, this review article outlines the in vivo mechanical environment of bone, muscle, cartilage, tendon, and ligaments, and tabulates the mechanical strain and stress in these tissues during physiological condition, vigorous, and moderate activities. This review article further discusses the principles of mechanical loading platforms to create physiologically relevant mechanical milieu in vitro for musculoskeletal tissue regeneration. A special emphasis is placed on adipose-derived stem cells (ADSCs) as an emerging valuable tool for regenerative musculoskeletal tissue engineering, as they are easily isolated, expanded, and able to differentiate into any musculoskeletal tissue. Finally, it highlights the current state-of-the art in ADSCs-guided musculoskeletal tissue regeneration under mechanical loading.

miR-33-5p, a novel mechano-sensitive microRNA promotes osteoblast differentiation by targeting Hmga2

MicroRNAs (miRNAs) interfere with the translation of specific target mRNAs and are thought to thereby regulate many cellular processes. However, the role of miRNAs in osteoblast mechanotransduction remains to be defined. In this study, we investigated the ability of a miRNA to respond to different mechanical environments and regulate mechano-induced osteoblast differentiation. First, we demonstrated that miR-33-5p expressed by osteoblasts is sensitive to multiple mechanical environments, microgravity and fluid shear stress. We then confirmed the ability of miR-33-5p to promote osteoblast differentiation. Microgravity or fluid shear stress influences osteoblast differentiation partially via miR-33-5p. Through bioinformatics analysis and a luciferase assay, we subsequently confirmed that Hmga2 is a target gene of miR-33-5p that negatively regulates osteoblast differentiation. Moreover, miR-33-5p regulates osteoblast differentiation partially via Hmga2. In summary, our findings demonstrate that miR-33-5p is a novel mechano-sensitive miRNA that can promote osteoblast differentiation and participate in the regulation of differentiation induced by changes in the mechanical environment, suggesting this miRNA as a potential target for the treatment of pathological bone loss.

Regulation of Ligand and Shear Stress-induced Insulin-like Growth Factor 1 (IGF1) Signaling by the Integrin Pathway

Mechanical loading of the skeleton, as achieved during daily movement and exercise, preserves bone mass and stimulates bone formation, whereas skeletal unloading from prolonged immobilization leads to bone loss. A functional interplay between the insulin-like growth factor 1 receptor (IGF1R), a major player in skeletal development, and integrins, mechanosensors, is thought to regulate the anabolic response of osteogenic cells to mechanical load. The mechanistic basis for this cross-talk is unclear. Here we report that integrin signaling regulates activation of IGF1R and downstream targets in response to both IGF1 and a mechanical stimulus. In addition, integrins potentiate responsiveness of IGF1R to IGF1 and mechanical forces. We demonstrate that integrin-associated kinases, Rous sarcoma oncogene (SRC) and focal adhesion kinase (FAK), display distinct actions on IGF1 signaling; FAK regulates IGF1R activation and its downstream effectors, AKT and ERK, whereas SRC controls signaling downstream of IGF1R. These findings linked to our observation that IGF1 assembles the formation of a heterocomplex between IGF1R and integrin β3 subunit indicate that the regulation of IGF1 signaling by integrins proceeds by direct receptor-receptor interaction as a possible means to translate biomechanical forces into osteoanabolic signals.

The influence of hydrostatic pressure on tissue engineered bone development

The hydrostatic pressure stimulation of an appropriately cell-seeded porous scaffold within a bioreactor is a promising method for engineering bone tissue external to the body. We propose a mathematical model, and employ a suite of candidate constitutive laws, to qualitatively describe the effect of applied hydrostatic pressure on the quantity of minerals deposited in such an experimental setup. By comparing data from numerical simulations with experimental observations under a number of stimulation protocols, we suggest that the response of bone cells to an applied pressure requires consideration of two components; (i) a component describing the cell memory of the applied stimulation, and (ii) a recovery component, capturing the time cells require to recover from high rates of mineralisation.

Mechanosensitive TRPM7 mediates shear stress and modulates osteogenic differentiation of mesenchymal stromal cells through Osterix pathway

Microenvironments that modulate fate commitments of mesenchymal stromal cells (MSCs) are composed of chemical and physical cues, but the latter ones are much less investigated. Here we demonstrate that intermittent fluid shear stress (IFSS), a potent and physiologically relevant mechanical stimulus, regulates osteogenic differentiation of MSCs through Transient receptor potential melastatin 7 (TRPM7)-Osterix axis. Immunostaining showed the localization of TRPM7 near or at cell membrane upon IFSS, and calcium imaging analysis demonstrated the transient increase of cytosolic free calcium. Expressions of osteogenic marker genes including Osterix, but not Runx2, were upregulated after three-hour IFSS. Phosphorylation of p38 and Smad1/5 was promoted by IFSS as well. TRPM7 gene knockdown abolished the promotion of bone-related gene expressions and phosphorylation. We illustrate that TRPM7 is mechanosensitive to shear force of 1.2 Pa, which is much lower than 98 Pa pressure loading reported recently, and mediates distinct mechanotransduction pathways. Additionally, our results suggest the differential roles of TRPM7 in endochondral and intramembranous ossification. Together, this study elucidates the mechanotransduction in MSCs fate commitments and displays an efficient mechano-modulation for MSCs osteogenic differentiation. Such findings should be taken into consideration when designing relevant scaffolds and microfluidic devices for osteogenic induction in the future.

The MEK5/ERK5 pathway mediates fluid shear stress promoted osteoblast differentiation

The aim of this study was to determine the role of the mitogen-activated protein kinase kinase (MEK) 5/extracellular signal-regulated kinase (ERK) 5 pathway in osteoblast differentiation promoted by intermittent fluid shear stress (FSS). MC3T3-E1 osteoblastic cells were subjected to 12 dyn/cm(2) intermittent FSS, and the phenotypic markers for osteoblast differentiation, such as alkaline phosphatase (ALP) activity and expression of osteopontin (OPN) and osteocalcin (OCN), were then examined. The results showed that intermittent FSS could stimulate ERK5 phosphorylation, ALP activity and the expression of OPN and OCN. When the MEK5/ERK5 pathway was selectively inhibited by BIX02189, ALP activity was suppressed, and the expression of OPN and OCN was downregulated. Intermittent FSS induce the expression of Runt-related transcription factor-2 (Runx-2), which is involved in osteoblast differentiation by promoting the transcription of the above genes. Furthermore, the expression of Runx-2 was also reduced after treatment with BIX02189. Finally, we found that intermittent FSS was a more intense stimulus than steady FSS for promoting osteoblast differentiation. In summary, our results suggest that the MEK5/ERK5 pathway mediates osteoblast differentiation promoted by intermittent FSS, which was more effective than steady FSS in the differentiation process. The MEK5/ERK5 pathway also mediates FSS-induced Runx-2 expression in osteoblast differentiation.

Oscillatory shear stress induced calcium flickers in osteoblast cells

The dynamic physical microenvironment of bone affects the activity of osteoblast cells, yet little is known about how osteoblast mechanotransduction depends on different features of a dynamic stimulus. Here we investigated the effect of physiologically relevant oscillatory flow shear stress on the calcium mobility in osteoblast cells within a microfluidic platform that mimics the confined environment of bone matrix. We characterized the spatiotemporal evolution of intracellular calcium 'flickers', an important signature of cell activation, in response to steady, pulsatile, and oscillatory shear stress. We found that oscillatory flow induces surprisingly higher flicker activity than other flow types. We could further attribute this phenomenon to the opening of a stretch activated ion channel, namely TRPM7. We also found that localization of TRPM7 within the cholesterol-enriched lipid raft domains of plasma membranes is essential for its activity. Collectively our findings elucidated a candidate mechanism for the flow mediated stimulation of osteoblast cells. They therefore have implications towards unveiling various facets of bone formation and remodelling in healthy and diseased conditions, including bone-metastasis of various cancer types, diabetes, and inflammatory autoimmune diseases.

The optimal combination of substrate chemistry with physiological fluid shear stress

Osteoblasts on implanted biomaterials sense both substrate chemistry and mechanical stimulus. The effects of substrate chemistry alone and mechanical stimulus alone on osteoblasts have been widely studied. This study investigates the optimal combination of substrate chemistry and 12dyn/cm(2) physiological flow shear stress (FSS) by examining their influences on primary rat osteoblasts (ROBs), including the releases of ATP, nitric oxide (NO), and prostaglandin E2 (PGE2). Self-assembled monolayers (SAMs) on glass slides with -OH, -CH3, and -NH2 were employed to provide various substrate chemistries, whereas a parallel-plate fluid flow system produced the physiological FSS. Substrate chemistry alone exerted no observable effects on the releases of ATP, NO, and PGE2. Nevertheless, when ROBs were exposed to both substrate chemistry and FSS, the ATP releases of NH2 were upregulated about 12-fold compared to substrate chemistry alone, while the ATP releases of CH3 and OH was similarly increased 7-fold at the peak. Similar trends were observed for the releases of NO and PGE2. The expressions of ATP, NO, and PGE2 followed the pattern of NH2-FSS>Glass-FSS>CH3-FSS≈OH-FSS. ROBs on NH2 produced the optimal combination of substrate chemistry with the physiological FSS. The F-actin organization and focal adhesion (FA) formation of ROBs on various SAMs without FSS were examined. NH2 produced the best results whereas CH3 and OH produced the worst ones. Inhibition of FAs and/or disruption of F-actin significantly decreased the releases of FSS-induced PGE2, NO, and/or ATP. Consequently, a mechanism was proposed that the best F-actin organization and FA formation of ROBs on NH2 lead to the optimal combination of substrate chemistry with the 12dyn/cm(2) physiological FSS. This mechanism gives guidance for the design of implanted biomaterials and bioreactors for bone tissue engineering.

Aggravation of inflammatory response by costimulation with titanium particles and mechanical perturbations in osteoblast- and macrophage-like cells

The interface between bone tissue and metal implants undergoes various types of mechanical loading, such as strain, compression, fluid pressure, and shear stress, from daily activities. Such mechanical perturbations create suboptimal environments at the host bone-implant junction, causing an accumulation of wear particles and debilitating osseous integration, potentially leading to implant failure. While many studies have focused on the effect of particles on macrophages or osteoprogenitor cells, differential and combined effects of mechanical perturbations and particles on such cell types have not been extensively studied. In this study, macrophages and osteoprogenitor cells were subjected to physiological and superphysiological mechanical stimuli in the presence and absence of Ti particles with the aim of simulating various microenvironments of the host bone-implant junction. Macrophages and osteoprogenitor cells were capable of engulfing Ti particles through actin remodeling and also exhibited changes in mRNA levels of proinflammatory cytokines under certain conditions. In osteoprogenitor cells, superphysiological strain increased proinflammatory gene expression; in macrophages, such mechanical perturbations did not affect gene expression. We confirmed that this phenomenon in osteoprogenitor cells occurred via activation of the ERK1/2 signaling pathway as a result of damage to the cytoplasmic membrane. Furthermore, AZD6244, a clinically relevant inhibitor of the ERK1/2 pathway, mitigated particle-induced inflammatory gene expression in osteoprogenitor cells and macrophages. This study provides evidence of more inflammatory responses under mechanical strains in osteoprogenitor cells than macrophages. Phagocytosis of particles and mechanical perturbation costimulate the ERK1/2 pathway, leading to expression of proinflammatory genes.

Cytoskeletal reorganization mediates fluid shear stress-induced ERK5 activation in osteoblastic cells

Mechanotransduction is a complicated process, of which mechanosensation is the first step. Previous studies have shown that the cytoskeleton plays a crucial role in mechanosensation and the mediation of intracellular signal transduction. However, the mechanism of mechanotransduction in the bone remains elusive. Here, we investigated the potential involvement of a novel MAPK (mitogen-activated protein kinase) member, ERK5 (extracellular-signal-regulated kinase 5), in the response of osteoblastic cells to FSS (fluid shear stress). Our results demonstrated that ERK5 was rapidly phosphorylated in pre-osteoblastic MC3T3-E1 cells upon FSS, and the integrity and reorganization of the cytoskeleton were critical in this process, in which the cytoskeleton-dependent activation of FAK (focal adhesion kinase) may be involved in the activation of ERK5 induced by FSS. Moreover, we found that cytoskeletal disruption led to significant down-regulation of ERK5 phosphorylation, but had no effect on ERK5 nuclear localization. Furthermore, the cytoskeleton rapidly reorganized in response to FSS, but long-time fluid load, even at a physiological level, led to cytoskeletal disruption, suggesting that other pathways may be involved in long-term mechanotransduction. Taken together, our data provide new insight into the mechanisms of mechanosensation by highlighting the link between ERK5 activation and cytoskeletal reorganization in osteoblasts undergoing FSS.

Cyclic fluid shear stress promotes osteoblastic cells proliferation through ERK5 signaling pathway

Fluid shear stress plays an important role in bone remodeling, however, the mechanism of mechanotransduction in bone tissue remains unclear. Recently, ERK5 has been found to be involved in multiple cellular processes. This study was designed to investigate the potential involvement of ERK5 in the proliferative response of osteoblastic cells to cyclic fluid shear stress. We reported here that cyclic fluid shear stress promoted ERK5 phosphorylation in MC3T3-E1 cells. Inhibition of ERK5 phosphorylation attenuated the increased expression of AP-1 and cyclin D1 and cell proliferation induced by cyclic fluid flow, but promoted p-16 expression. Further more, we found that cyclic fluid shear stress was a better stimuli for ERK5 activation and cyclin D1 expression compared with continuous fluid shear stress. Moreover, the pharmacological ERK5 inhibitor, BIX02189, which inhibited ERK5 phosphorylation in a time-dependent manner and the suppression lasted for at least 4 h. Taken together, we demonstrate that ERK5/AP-1/cyclin D1 pathway is involved in the mechanism of osteoblasts proliferation induced by cyclic fluid shear stress, which is superior in promoting cellular proliferation compared with continuous fluid shear stress.

Pneumatic pressure bioreactor for cyclic hydrostatic stress application: mechanobiology effects on periodontal ligament cells

A bioreactor system was developed to provide high-amplitude cyclic hydrostatic compressive stress (cHSC) using compressed air mixed commercially as needed to create partial pressures of oxygen and carbon dioxide appropriate for the cells under investigation. Operating pressures as high as 300 psi are achievable in this system at cyclic speeds of up to 0.2 Hz. In this study, ligamentous fibroblasts from human periodontal ligaments (n = 6) were compressed on two consecutive days at 150 psi for 3 h each day, and the mRNA for families of extracellular matrix protein and protease isoforms was evaluated by real-time PCR array. Several integrins were significantly upregulated, most notably alpha-3 (6.4-fold), as was SPG7 (12.1-fold). Among the collagens, Col8a1 was highly upregulated at 53.5-fold, with Col6a1, Col6a2, and Col7a1 also significantly upregulated 4.4- to 8.5-fold. MMP-1 was the most affected at 122.9-fold upregulation. MMP-14 likewise increased 17.8-fold with slight reductions for the gelatinases and a significant increase of TIMP-2 at 5.8-fold. The development of this bioreactor system and its utility in characterizing periodontal ligament fibroblast mechanobiology in intermediate-term testing hold promise for better simulating the conditions of the musculoskeletal system and the large cyclic compressive stresses joints may experience in gait, exertion, and mastication.

Stimulation of bone growth factor synthesis in human osteoblasts and fibroblasts after extracorporeal shock wave application

BACKGROUND

Nonunion is a common problem in Orthopedic Surgery. In the recent years alternatives to the standard surgical procedures were tested clinically and in vitro. Extracorporeal shock wave therapy (ESWT) showed promising results in both settings. We hypothesized that in target tissue cells from nonunions like fibroblasts and osteoblasts ESWT increases the release of bone growth factors.

METHODS

Fibroblasts and osteoblasts were suspended in 3 ml cryotubes and subjected to 250/500 shock waves at 25 kV using an experimental electrohydraulic lithotripter. After ESWT, cell viability was determined and cells were seeded at 1 × 10(5) cells in 12 well plates. After 24, 48, and 72 h cell number was determined and supernatant was frozen. The levels of growth factors FGF-2 and TGF-β(1) were examined using ELISA. A control group was treated equally without receiving ESWT.

RESULTS

After 24 h there was a significant increase in FGF-2 levels (p < 0.05) with significant correlation to the number of impulses (p < 0.05) observed. TGF-β(1) showed a time-dependent increase with a peak at 48 h which was not significantly different from the control group.

CONCLUSIONS

FGF-2, an important growth factor in new bone formation, was shown to be produced by human fibroblasts and osteoblasts after treatment with ESWT. These findings demonstrate that ESWT is able to cause bone healing through a molecular way by inducing growth factor synthesis.

Finite element analysis of a novel pin-sleeve system for external fixation of distal limb fractures in horses

The transfixation pin cast (TPC) is an external skeletal fixation technique used to treat horses with distal limb fractures, but its use is often associated with pin-loosening and an increased risk of treatment failure. To address implant loosening, the pin sleeve cast system (PSC) was recently designed and consists of a pin-sleeve unit inserted into the bone. Each pin runs through a sleeve placed in the bone, making contact at two fixed points only within the sleeve. Each pin is attached to a ring embedded in a resin cast. In this report, the mechanical performance of a traditional TPC pin arrangement was compared with that of the PSC using validated finite element models of bone substitutes previously tested in vitro. The PSC resulted in a marked reduction in peak strain magnitude around the pins and a more even distribution of strain across the bone cortex. The two systems resulted in comparable proximal fragment displacement and had a similar stress concentration around bone defects during implant removal. The findings suggest that the PSC load transfer mechanism is effective even in geometrically complex structures like equine bones.

An integrated instrument for rapidly deforming living cells using rapid pressure pulses and simultaneously monitoring applied strain in near real time

Because many types of living cells are sensitive to applied strain, different in vitro models have been designed to elucidate the cellular and subcellular processes that respond to mechanical deformation at both the cell and tissue level. Our focus was to improve upon an already established strain system to make it capable of independently monitoring the deflection and applied pressure delivered to specific wells of a commercially available, deformable multiwell culture plate. To accomplish this, we devised a custom frame that was capable of mounting deformable 6 or 24 well plates, a pressurization system that could load wells within the plates, and a camera-based imaging system which was capable of capturing strain responses at a sufficiently high frame rate. The system used a user defined program constructed in Labview(®) to trigger plate pressurization while simultaneously allowing the deflection of the silicone elastomeric plate bottoms to be imaged in near real time. With this system, up to six wells could be pulsed simultaneously using compressed air or nitrogen. Digital image capture allowed near-real time monitoring of applied strain, strain rate, and the cell loading profiles. Although our ultimate goal is to determine how different strain rates applied to neurons modulates their intrinsic biochemical cascades, the same platform technology could be readily applied to other systems. Combining commercially available, deformable multiwell plates with a simple instrument having the monitoring capabilities described here should permit near real time calculations of stretch-induced membrane strain in multiple wells in real time for a wide variety of applications, including high throughput drug screening.

Effects of physiological mechanical strains on the release of growth factors and the expression of differentiation marker genes in human osteoblasts growing on Ti-6Al-4V

Mechanical loading factors at the bone-implant interface are critical for the osseointegration and clinical success of the implant. The aim of the present investigation was to study the effects of mechanical strain on the orthopedic biomaterial Ti-6Al-4V/osteoblast interface, using an in vitro model. Homogeneous strain was applied to human bone marrow derived osteoblasts (HBMDOs) cultured on Ti-6Al-4V, at physiological levels (strain magnitudes 500 microstrain (microepsilon) and 1000 microepsilon, at frequencies of load application 0.5 Hz and 1 Hz), by a mechanostimulatory system, based on the principle of four-point bending. Semi-quantitative reverse transcription-polymerase chain reaction (sqRT-PCR) was used to determine the mRNA expression of Cbfa1 and osteocalcin at different loading conditions. The release of growth factors as a response to stretch was also investigated by transferring stretch-conditioned media to nonstretched cells and by measuring their effect on the regulation of DNA synthesis. Mechanical loading was found to contribute to the regulation of osteoblast differentiation by influencing the level of the osteoblast-specific transcription factor Cbfa1, both at the mRNA and protein level, and also the level of osteocalcin, which is regarded as the most osteoblast-specific gene. Both genes were differentially expressed shortly after the application of different mechanical stimuli, in terms of strain frequency, magnitude, and time interval. Media conditioned from mechanically stressed HBMDOs stimulate DNA synthesis more intensely compared to media conditioned from unstressed control cultures, indicating that mechanical strain induces the release of a mitogenic potential that regulates cell proliferation.

Estimation of hydrodynamic shear stresses developed on human osteoblasts cultured on Ti-6Al-4V and strained by four point bending. Effects of mechanical loading to specific gene expression

The aim of the present investigation was to study the effects of mechanical strain on the orthopedic biomaterial Ti-6Al-4V-osteoblast interface, using an in vitro model. Homogeneous strain was applied to Human Bone Marrow derived Osteoblasts (HBMDOs) cultured on Ti-6Al-4V, at levels which are considered physiological, by a four-point bending mechanostimulatory system. A simple model for the estimation of maximum hydrodynamic shear stresses developed on cell culture layer and induced by nutrient medium flow during mechanical loading, as a function of the geometry of the culture plate and the load characteristics, is proposed. Shear stresses were lower than those which can elicit cell response. Mechanical loading was found that contributes to the regulation of osteoblast differentiation by influencing the expression of the osteoblast-specific transcription factor Cbfa1, both at the mRNA and protein level, and also the osteocalcin expression, whereas osteopontin gene expression was unaffected by mechanical loading at all experimental conditions.

Pressure-sensitive nutrient consumption via dynamic normal stress in rotational bioreactors

Pressure-sensitive biological response is simulated in "rotating-cup" bioreactors with unidirectional modulations in compressive stress at the cylindrical wall that stimulate bone-tissue growth. Anchorage-dependent mammalian cells (i) adhere to a protein coating, (ii) receive nutrients and oxygen from an aqueous medium via radial diffusion toward the active surface, and (iii) respond to physiological modulations in centrifual-force-induced fluid pressure at the cell/aqueous-medium interface. This process is modeled by the classic diffusion equation (i.e., Fick's second law), with a time-dependent reaction/diffusion boundary condition at the wall. Non-reversing angular velocity modulations resemble pulsations at physiological frequencies. Computer simulations of nutrient consumption profiles suggest that rotational bioreactor designs should consider the effects of normal stress when the pressure-sensitive Damköhler number (i.e., ratio of the pressure-dependent zeroth-order rate of nutrient consumption relative to the rate of nutrient diffusion toward active cells adhered to the cylindrical wall), evaluated under steady rotation, is greater than approximately 10-20% of the stress-free Damköhler number (i.e., beta(0,1st-order)=0.025) for simple 1st-order stress-free kinetics, and approximately 1% of the stress-free Damköhler number (i.e., beta(0,2nd-order)=0.40) for complex 2nd-order stress-free nutrient consumption. When the peak-to-peak amplitude of angular velocity modulations of the cylindrical wall is the same as or larger than the angular velocity for steady rotation, the effect of non-reversing centrifugal-force-induced dynamic normal stress in rotational bioreactors, superimposed on steady rotation, can be significant when one is below the critical value of the pressure-sensitive Damköhler number that has been identified under steady rotation.

[Dilation of the internal auditory canal and intracanalicular vestibular schwannoma: what are the mechanisms involved?]

OBJECTIVES

To present a unique case of unilateral widening of the internal auditory canal (IAC) with no significant contact with an ipsilateral intracanalicular vestibular schwannoma (VS), raising the issue of the cause(s) of this IAC widening.

METHODS

The medical record and radiologic data were reviewed of a patient presenting an enlarged unilateral IAC, which led to the diagnosis of an intracanalicular VS that could not account for the dilation.

RESULTS

The patient had a unilateral dilation of the IAC that did not match the ipsilateral VS he had. As a result, this case motivated discussion of whether such dilation of the IAC was congenitally asymmetrical or the result of the mechanisms involved in the widening of the IAC.

CONCLUSIONS

Although asymmetry of IAC is a current notion, this case demonstrates a contrario that increased pressure exerted on the walls of the IAC cannot be the only mechanism in such widening.

MMP-3 response to compressive forces in vitro and in vivo

During orthodontic tooth movement, bone resorption occurs at the compression site. However, the mechanism underlying resorption remains unclear. Applying compressive force to human osteoblast-like cells grown in a 3D collagen gel, we examined gene induction by using microarray and RT-PCR analysis. Among 43 genes exhibiting significant changes, cyclo-oxygenase-2, ornithine decarboxylase, and matrix metalloproteinase-3 (MMP-3) were up-regulated, whereas membrane-bound interleukin-1 receptor accessory protein was down-regulated. The MMP-3 protein increases were further confirmed by Western blot. To ascertain whether MMP-3 is up-regulated in vivo by orthodontic force, we examined human bone samples at the compressive site by realigning the angulated molars. Immunohistochemical staining revealed MMP-3 distributed along the compressive site of the bony region within 3 days of compression. Since MMP-3 participates in degradation of a wide range of extracellular matrix molecules, we propose that MMP-3 plays an important role in bone resorption during orthodontic tooth movement.

Nmp4/CIZ contributes to fluid shear stress induced MMP-13 gene induction in osteoblasts

The expression of matrix metalloproteinase-13 (MMP-13), involved in bone turnover, is elevated in stretched MC3T3-E1 osteoblast-like cells. Strain-mediated forces impact bone remodeling due in large part to the movement of fluid through the canalicular-lacunar network. The resulting fluid shear stress (FSS) over the surface membranes of bone cells initiates bone remodeling. Although the nuclear events mediating putative FSS-induced changes in osteoblast MMP-13 transcription are unknown, previous studies with bone cells suggest an overlap between osteoblast FSS- and PTH-induced signal response pathways. MMP-13 PTH response is regulated by a 110 bp 5' regulatory region, conserved across the mouse, rat, and human genes, that supports the binding of numerous transcription factors including Runx2, c-fos/c-jun, Ets-1, and nuclear matrix protein 4/cas interacting zinc finger protein (Nmp4/CIZ) a nucleocytoplasmic shuttling trans-acting protein that attenuates PTH-driven transcription. Nmp4/CIZ also binds p130(cas), an adaptor protein implicated in mechanotransduction. Here we sought to determine whether Nmp4/CIZ contributes to FSS-induced changes in MMP-13 transcription. FSS (12 dynes/cm(2), 3-5 h) increased MMP-13 promoter-reporter activity approximately two-fold in MC3T3-E1 osteoblast-like cells attended by a comparable increase in mRNA expression. This was accompanied by a decrease in Nmp4/CIZ binding to its cis-element within the PTH response region, the mutation of which abrogated the MMP-13 response to FSS. Interestingly, FSS enhanced Nmp4/CIZ promoter activity and induced p130(cas) nuclear translocation. We conclude that the PTH regulatory region of MMP-13 also contributes to FSS response and that Nmp4/CIZ plays similar but distinct roles in mediating hormone- and FSS-driven induction of MMP-13 in bone cells.

Expansion of human bone marrow stromal cells on poly-(dl-lactide-co-glycolide) (PDLLGA) hollow fibres designed for use in skeletal tissue engineering

Strategies to expand human bone marrow stromal cells (HBMSC) for bone tissue engineering are a key to revolutionising the processes involved in three-dimensional skeletal tissue reconstruction. To facilitate this process we believe the use of biodegradable porous poly(DL-lactide-co-glycolide) (PDL LGA) hollow fibres as a scaffold used in combination with HBMSC to initiate natural bone repair and regeneration offers a potential solution. In this study, the biocompatibility of 75:25 PDL LGA fibres with HBMSC and the capacity of a PDL LGA fibre-associated HBMSC-monolayer to establish an osteogenic phenotype in vivo was examined. A high proportion of HBMSC survived when expanded on PDL LGA fibres for 6 days, with only 10% of the propidium iodide (pI)-labelled population represented in the sub-G1 DNA peak on analysis by flow cytometry. Tracking carboxy-fluorescein diacetate, succinimidyl ester (CFSE)-labelled HBMSC by flow cytometry indicated that HBMSC attachment to the P(DL)LGA fibres does not interfere with their rate of proliferation. Furthermore, in response to osteogenic stimuli, HBMSC expanded on PDL LGA fibres can differentiate, as expected, along the osteogenic lineage with associated alkaline phosphatase activity. Following implantation into SCID mice, osteogenic-conditioned PDL LGA fibre-HBMSC graft resulted in type I collagen deposition and associated bone mineralisation and osteoid formation, as evidenced by immunohistochemistry and histology. These studies provide evidence that porous PDL LGA hollow fibre-HBMSC graft is an innovative biomaterial that offers new approaches to mesenchymal cell expansion, which could be utilised as a scaffold for skeletal tissue generation.

Chitosan monomer accelerates alkaline phosphatase activity on human osteoblastic cells under hypofunctional conditions

Chitosan is a natural polyaminosaccharide that is extensively applied as an antitumor and antirheumatic drug. However, there are few reports about its effects on hypofunctional osteoblasts in vitro. We investigated the biological characteristics of a human osteoblastic cell line (NOS-1 cells) that was cultured with a chitosan monomer-containing medium under simulated microgravity conditions. After 7 days of cell incubation under the conventional conditions, the flasks were transferred to a microgravity simulator for 3 days. In the 0.005% chitosan monomer supplemented group, the marker enzyme of biological mineralization, the alkaline phosphatase (ALP) activity, was significantly higher compared with the control group (p<0.05). A cDNA microarray was performed to investigate the effects on the mRNA level by chitosan monomer, and the fluorescent signal was analyzed. The interferon gamma (IFN-gamma) receptor gene was detected with a signal ration of 2.2. The slight increase of IFN-gamma receptor expression was confirmed after 3 days of incubation according to RT-PCR analysis. Western blot analysis also showed the increased expression of IFN-gamma receptor. These results suggest that a supra-low concentration of chitosan monomer may increase the ALP activity of osteoblastic cells through the IFN-gamma receptor at the early phase of cell culture and recover the activity for biological mineralization under the hypofunctional condition.

Part I: A novel in-vitro system for simultaneous mechanical stimulation and time-lapse microscopy in 3D

To investigate the migration response of cells to changes in their biophysical environment, a novel uniaxial cell stimulation device (UCSD) has been designed and tested. The device is capable of applying very precise user-defined static or dynamic mechanical stimuli in a physiologically relevant strain window (up to 50%) and frequency bandwidth (up to 2 Hz) to cells residing in a three-dimensional (3D) environment while single-cell migration is simultaneously measured by time-lapse microscopy. The system is an advancement over uniaxial loading devices reported to date in that it allows temporal and spatial quantification of migration as a function of the micromechanical environment. We make use of the favorable physical and biological properties of poly(ethylene glycol) hydrogels as model matrix and present a method for fabricating cell-containing hydrogel constructs. The 3D strain field within these constructs is modeled by finite element analysis. Fibroblasts reversibly altered their morphology and orientation in response to the strain field. In the succeeding companion paper we then exploit the system to analyze fibroblast motility induced by different stimulation regimes (refer to part II).