Extended-range glucose sensor employing engineered glucose dehydrogenases

Carbon nanotubes: a powerful bridge for conductivity and flexibility in electrochemical glucose sensors

The utilization of nanomaterials in the biosensor field has garnered substantial attention in recent years. Initially, the emphasis was on enhancing the sensor current rather than material interactions. However, carbon nanotubes (CNTs) have gained prominence in glucose sensors due to their high aspect ratio, remarkable chemical stability, and notable optical and electronic attributes. The diverse nanostructures and metal surface designs of CNTs, coupled with their exceptional physical and chemical properties, have led to diverse applications in electrochemical glucose sensor research. Substantial progress has been achieved, particularly in constructing flexible interfaces based on CNTs. This review focuses on CNT-based sensor design, manufacturing advancements, material synergy effects, and minimally invasive/noninvasive glucose monitoring devices. The review also discusses the trend toward simultaneous detection of multiple markers in glucose sensors and the pivotal role played by CNTs in this trend. Furthermore, the latest applications of CNTs in electrochemical glucose sensors are explored, accompanied by an overview of the current status, challenges, and future prospects of CNT-based sensors and their potential applications.

Craft-and-Stick Xurographic Manufacturing of Integrated Microfluidic Electrochemical Sensing Platform

An innovative modular approach for facile design and construction of flexible microfluidic biosensor platforms based on a dry manufacturing "craft-and-stick" approach is developed. The design and fabrication of the flexible graphene paper electrode (GPE) unit and polyethylene tetraphthalate sheet (PET)6/adhesive fluidic unit are completed by an economic and generic xurographic craft approach. The GPE widths and the microfluidic channels can be constructed down to 300 μm and 200 μm, respectively. Both units were assembled by simple double-sided adhesive tapes into a microfluidic integrated GPE (MF-iGPE) that are flexible, thin (<0.5 mm), and lightweight (0.4 g). We further functionalized the iGPE with Prussian blue and glucose oxidase for the fabrication of MF-iGPE glucose biosensors. With a closed-channel PET fluidic pattern, the MF-iGPE glucose biosensors were packaged and sealed to protect the integrated device from moisture for storage and could easily open with scissors for sample loading. Our glucose biosensors showed 2 linear dynamic regions of 0.05-1.0 and 1.0-5.5 mmol L^-1 glucose. The MF-iGPE showed good reproducibility for glucose detection (RSD < 6.1%, n = 6) and required only 10 μL of the analyte. This modular craft-and-stick manufacturing approach could potentially further develop along the concept of paper-crafted model assembly kits suitable for low-resource laboratories or classroom settings.

PQQ-GDH - Structure, function and application in bioelectrochemistry

This review summarizes the basic features of the PQQ-GDH enzyme as one of the sugar converting biocatalysts. Focus is on the membrane -bound and the soluble form. Furthermore, the main principles of enzymatic catalysis as well as studies on the physiological importance are reviewed. A short overview is given on developments in protein engineering. The major part, however, deals with the different fields of application in bioelectrochemistry. This includes approaches for enzyme-electrode communication such as direct electron transfer, mediator-based systems, redox polymers or conducting polymers and holoenzyme reconstitution, and covers applied areas such as biosensing, biofuel cells, recycling schemes, enzyme competition, light-directed sensing, switchable detection schemes, logical operations by enzyme electrodes and immune sensing.

A Dual-Sensing DNA Nanostructure with an Ultrabroad Detection Range

Despite considerable interest in the development of biosensors that can measure analyte concentrations with a dynamic range spanning many orders of magnitude, this goal has proven difficult to achieve. We describe here a modular biosensor architecture that integrates two different readout mechanisms into a single-molecule construct that can achieve target detection across an extraordinarily broad dynamic range. Our dual-mode readout DNA biosensor combines an aptamer and a DNAzyme to quantify adenosine triphosphate (ATP) with two different mechanisms, which respond to low (micromolar) and high (millimolar) concentrations by generating distinct readouts based on changes in fluorescence and absorbance, respectively. Importantly, we have also devised regulatory strategies to fine-tune the target detection range of each sensor module by controlling the target-sensitivity of each readout mechanism. Using this strategy, we report the detection of ATP at a dynamic range spanning 1-500 000 μM, more than 5 orders of magnitude, representing the largest dynamic range reported to date with a single biosensor construct.

Biomedical Application of Electroactive Polymers in Electrochemical Sensors: A Review

Conducting polymers are of interest due to their unique behavior on exposure to electric fields, which has led to their use in flexible electronics, sensors, and biomaterials. The unique electroactive properties of conducting polymers allow them to be used to prepare biosensors that enable real time, point of care (POC) testing. Potential advantages of these devices include their low cost and low detection limit, ultimately resulting in increased access to treatment. This article presents a review of the characteristics of conducting polymer-based biosensors and the recent advances in their application in the recognition of disease biomarkers.

Improvement in the thermal stability of Mucor prainii-derived FAD-dependent glucose dehydrogenase via protein chimerization

FAD-dependent glucose dehydrogenase (FAD-GDH, EC 1.1.5.9) is an enzyme utilized industrially in glucose sensors. Previously, FAD-GDH isolated from Mucor prainii (MpGDH) was demonstrated to have high substrate specificity for glucose. However, MpGDH displays poor thermostability and is inactivated after incubation at 45 °C for only 15 min, which prevents its use in industrial applications, especially in continuous glucose monitoring (CGM) systems. Therefore, in this study, a chimeric MpGDH (Mr144-297) was engineered from the glucose-specific MpGDH and the highly thermostable FAD-GDH obtained from Mucor sp. RD056860 (MrdGDH). Mr144-297 demonstrated significantly higher heat resistance, with stability at even 55 °C. In addition, Mr144-297 maintained both high affinity and accurate substrate specificity for D-glucose. Furthermore, eight mutation sites that contributed to improved thermal stability and increased productivity in Escherichia coli were identified. Collectively, chimerization of FAD-GDHs can be an effective method for the construction of an FAD-GDH with greater stability, and the chimeric FAD-GDH described herein could be adapted for use in continuous glucose monitoring sensors.

Immobilized Enzymes in Biosensor Applications

Enzyme-based biosensing devices have been extensively developed over the last few decades, and have proven to be innovative techniques in the qualitative and quantitative analysis of a variety of target substrates over a wide range of applications. Distinct advantages that enzyme-based biosensors provide, such as high sensitivity and specificity, portability, cost-effectiveness, and the possibilities for miniaturization and point-of-care diagnostic testing make them more and more attractive for research focused on clinical analysis, food safety control, or disease monitoring purposes. Therefore, this review article investigates the operating principle of enzymatic biosensors utilizing electrochemical, optical, thermistor, and piezoelectric measurement techniques and their applications in the literature, as well as approaches in improving the use of enzymes for biosensors.

DNA-Based Nanodevices Controlled by Purely Entropic Linker Domains

We demonstrate here the rational design of purely entropic domains as a versatile approach to achieve control of the input/output response of synthetic molecular receptors. To do so and to highlight the versatility and generality of this approach, we have rationally re-engineered two model DNA-based receptors: a clamp-like DNA-based switch that recognizes a specific DNA sequence and an ATP-binding aptamer. We show that, by varying the length of the linker domain that connects the two recognition portions of these receptors, it is possible to finely control their affinity for their specific ligand. Through mathematical modeling and thermodynamic characterization, we also demonstrate for both systems that entropy changes associated with changes in linker length are responsible for affinity modulation and that the linker we have designed behaves as a disordered random-coil polymer. The approach also allows us to regulate the ligand concentration range at which the receptors respond and show optimal specificity. Given these attributes, the use of purely entropic domains appears as a versatile and general approach to finely control the activity of synthetic receptors in a highly predictable and controlled fashion.

Wearable biofuel cells based on the classification of enzyme for high power outputs and lifetimes

Wearable enzymatic biofuel cells would be the most prospective fuel cells for wearable devices because of their low cost, compactness and flexibility. As the high specificity and catalytic properties of enzymes, enzymatic biofuel cells (EBFCs) catalyze the fuel associated with the redox reaction and get electrical energy. Available biofuels such as glucose, lactate and pyruvate can be harvested from biofluids of sweat, tears and blood, which afford cells a favorable use in implantable and wearable devices. However, the development of wearable enzymatic biofuel cells requires significant improvements on the power density and enzymes lifetime. In this paper, some new advances in improving the performance of wearable enzymatic biofuel cells are reviewed based on the bioanode and biocathode by classifying single-enzyme and multi-enzyme catalysis system. Thereinto, the bioanode usually contains oxidases and dehydrogenases as catalyst, and the biocathode utilizes the catalysis of multi-copper oxidases (MCOs) in the single system. For further enhancing the power density, efforts to develop multi-enzyme catalysis strategies are discussed in bioanode and biocathode respectively. Moreover, some potential technologies in recent years, such as carbon nanodots, CNT sponges and mixed operational/storage electrode are summarized owing to notable efficiency and the capability of enhancing electron transfer on the electrode. Finally, major challenges and future prospects are discussed for the high power output, stable and practical wearable enzymatic biofuel cells.

Construction of Uniform Monolayer- and Orientation-Tunable Enzyme Electrode by a Synthetic Glucose Dehydrogenase without Electron-Transfer Subunit via Optimized Site-Specific Gold-Binding Peptide Capable of Direct Electron Transfer

Direct electron transfer (DET) between enzymes and electrodes is a key issue for practical use of bioelectrocatalytic devices as a bioenergy process, such as enzymatic electrosynthesis, biosensors, and enzyme biofuel cells. To date, based on the DET of bioelectrocatalysis, less than 1% of the calculated theoretical current was transferred to final electron acceptor due to energy loss at enzyme-electrode interface. This study describes the design and construction of a synthetic glucose dehydrogenase (GDH; α and γ subunits) combined with a gold-binding peptide at its amino or carboxy terminus for direct contact between enzyme and electrode. The fused gold-binding peptide facilitated stable immobilization of GDH and constructed uniform monolayer of GDH onto a Au electrode. Depending on the fused site of binding peptide to the enzyme complex, nine combinations of recombinant GDH proteins on the electrode show significantly different direct electron-transfer efficiency across the enzyme-electrode interface. The fusion of site-specific binding peptide to the catalytic subunit (α subunit, carboxy terminus) of the enzyme complex enabled apparent direct electron transfer (DET) across the enzyme-electrode interface even in the absence of the electron-transfer subunit (i.e., β subunit having cytochrome domain). The catalytic glucose oxidation current at an onset potential of ca. (-)0.46 V vs Ag/AgCl was associated with the appearance of an flavin adenine dinucleotide (FAD)/FADH₂ redox wave and a stabilized bioelectrocatalytic current of more than 100 μA, determined from chronoamperometric analysis. Electron recovery was 7.64%, and the catalytic current generation was 249 μA per GDH enzyme loading unit (U), several orders of magnitude higher than the values reported previously. These observations corroborated that the last electron donor facing to electrode was controlled to be in close proximity without electron-transfer intermediates and the native affinity for glucose was preserved. The design and construction of the site-specific "sticky-ended" proteins without loss of catalytic activity could be applied to other redox enzymes having a buried active site.

Direct Electron Transfer of Dehydrogenases for Development of 3rd Generation Biosensors and Enzymatic Fuel Cells

Dehydrogenase based bioelectrocatalysis has been increasingly exploited in recent years in order to develop new bioelectrochemical devices, such as biosensors and biofuel cells, with improved performances. In some cases, dehydrogeases are able to directly exchange electrons with an appropriately designed electrode surface, without the need for an added redox mediator, allowing bioelectrocatalysis based on a direct electron transfer process. In this review we briefly describe the electron transfer mechanism of dehydrogenase enzymes and some of the characteristics required for bioelectrocatalysis reactions via a direct electron transfer mechanism. Special attention is given to cellobiose dehydrogenase and fructose dehydrogenase, which showed efficient direct electron transfer reactions. An overview of the most recent biosensors and biofuel cells based on the two dehydrogenases will be presented. The various strategies to prepare modified electrodes in order to improve the electron transfer properties of the device will be carefully investigated and all analytical parameters will be presented, discussed and compared.

Using Nature's "Tricks" To Rationally Tune the Binding Properties of Biomolecular Receptors

The biosensor community has long focused on achieving the lowest possible detection limits, with specificity (the ability to differentiate between closely similar target molecules) and sensitivity (the ability to differentiate between closely similar target concentrations) largely being relegated to secondary considerations and solved by the inclusion of cumbersome washing and dilution steps or via careful control experimental conditions. Nature, in contrast, cannot afford the luxury of washing and dilution steps, nor can she arbitrarily change the conditions (temperature, pH, ionic strength) under which binding occurs in the homeostatically maintained environment within the cell. This forces evolution to focus at least as much effort on achieving optimal sensitivity and specificity as on achieving low detection limits, leading to the "invention" of a number of mechanisms, such as allostery and cooperativity, by which the useful dynamic range of receptors can be tuned, extended, narrowed, or otherwise optimized by design, rather than by sample manipulation. As the use of biomolecular receptors in artificial technologies matures (i.e., moves away from multistep, laboratory-bound processes and toward, for example, systems supporting continuous in vivo measurement) and these technologies begin to mimic the reagentless single-step convenience of naturally occurring chemoperception systems, the ability to artificially design receptors of enhanced sensitivity and specificity will likely also grow in importance. Thus motivated, we have begun to explore the adaptation of nature's solutions to these problems to the biomolecular receptors often employed in artificial biotechnologies. Using the population-shift mechanism, for example, we have generated nested sets of receptors and allosteric inhibitors that greatly expanded the normally limited (less than 100-fold) useful dynamic range of unmodified molecular and aptamer beacons, enabling the single-step (e.g., dilution-free) measurement of target concentrations across up to 6 orders of magnitude. Using this same approach to rationally introduce sequestration or cooperativity into these receptors, we have likewise narrowed their dynamic range to as little as 1.5-fold, vastly improving the sensitivity with which they respond to small changes in the concentration of their target ligands. Given the ease with which we have been able to introduce these mechanisms into a wide range of DNA-based receptors and the rapidity with which the field of biomolecular design is maturing, we are optimistic that the use of these and similar naturally occurring regulatory mechanisms will provide viable solutions to a range of increasingly important analytical problems.

Single chip SPR and fluorescent ELISA assay of prostate specific antigen

A multi-channel system combining fluidics and micropatterned plasmonic materials with wavelength interrogation surface plasmon resonance (SPR) and fluorescence detection was integrated from the combination of a small and motorized fluorescence microscope mounted on a portable 4-channel SPR instrument. The SPR and fluorescent measurements were performed based on the same detection area in a multi-channel fluidic, with a sensing scheme for prostate-specific antigen (PSA) consisting of a sandwich assay with a capture anti-PSA immobilized onto the SPR sensor and a detection anti-PSA modified with horseradish peroxidase (HRP). In this dual-detection instrument, fluorescence was measured from the solution side of the micropatterned gold film, while the interface between the glass prism and the gold film served to interrogate the SPR response. The SPR sensors were comprised of microhole arrays fabricated by photolithography to enhance the instrumental response for PSA detection by approximately a factor of 2 to 3 and they were coated with a self-assembled monolayer of a peptide (3-MPA-HHHDD-OH) to minimize nonspecific adsorption. PSA was successfully detected at clinical concentrations from 10 pM to 50 nM with this integrated system in a single assay lasting 12 minutes, almost centering on the desired range for PSA diagnostic tests (>4 ng mL(-1) or >150 pM). The combination of two robust techniques in a single chip and instrument has led to a simple and effective assay that can be carried out on a small and portable instrument providing rapid biodetection of an important cancer biomarker with a dynamic range of nearly 4 orders of magnitude in the clinical range.

Novel glucose dehydrogenase from Mucor prainii: Purification, characterization, molecular cloning and gene expression in Aspergillus sojae

Glucose dehydrogenase (GDH) is of interest for its potential applications in the field of glucose sensors. To improve the performance of glucose sensors, GDH is required to have strict substrate specificity. A novel flavin adenine dinucleotide (FAD)-dependent GDH was isolated from Mucor prainii NISL0103 and its enzymatic properties were characterized. This FAD-dependent GDH (MpGDH) exhibited high specificity toward glucose. High specificity for glucose was also observed even in the presence of saccharides such as maltose, galactose and xylose. The molecular masses of the glycoforms of GDH ranged from 90 to 130 kDa. After deglycosylation, a single 80 kDa band was observed. The gene encoding MpGDH was cloned and expressed in Aspergillus sojae. The apparent kcat and Km values of recombinant enzyme for glucose were found to be 749.7 s(-1) and 28.3 mM, respectively. The results indicated that the characteristics of MpGDH were suitable for assaying blood glucose levels.

Engineered proteins: redox properties and their applications

Oxidoreductases and metalloproteins, representing more than one third of all known proteins, serve as significant catalysts for numerous biological processes that involve electron transfers such as photosynthesis, respiration, metabolism, and molecular signaling. The functional properties of the oxidoreductases/metalloproteins are determined by the nature of their redox centers. Protein engineering is a powerful approach that is used to incorporate biological and abiological redox cofactors as well as novel enzymes and redox proteins with predictable structures and desirable functions for important biological and chemical applications. The methods of protein engineering, mainly rational design, directed evolution, protein surface modifications, and domain shuffling, have allowed the creation and study of a number of redox proteins. This review presents a selection of engineered redox proteins achieved through these methods, resulting in a manipulation in redox potentials, an increase in electron-transfer efficiency, and an expansion of native proteins by de novo design. Such engineered/modified redox proteins with desired properties have led to a broad spectrum of practical applications, ranging from biosensors, biofuel cells, to pharmaceuticals and hybrid catalysis. Glucose biosensors are one of the most successful products in enzyme electrochemistry, with reconstituted glucose oxidase achieving effective electrical communication with the sensor electrode; direct electron-transfer-type biofuel cells are developed to avoid thermodynamic loss and mediator leakage; and fusion proteins of P450s and redox partners make the biocatalytic generation of drug metabolites possible. In summary, this review includes the properties and applications of the engineered redox proteins as well as their significance and great potential in the exploration of bioelectrochemical sensing devices.

Re-engineering electrochemical biosensors to narrow or extend their useful dynamic range

Here we demonstrate two convenient methods to extend and narrow the useful dynamic range of a model electrochemical DNA sensor. We did so by combining DNA probes of different target affinities but with similar specificity on the same electrode. We were able to achieve an extended dynamic response spanning 3 orders of magnitude in target concentration. Using a different strategy we have also narrowed the useful dynamic range of an E-DNA sensor to only an 8-fold range of target concentrations.

Engineering biosensors with extended, narrowed, or arbitrarily edited dynamic range

Biomolecular recognition has long been an important theme in artificial sensing technologies. A current limitation of protein- and nucleic acid-based recognition, however, is that the useful dynamic range of single-site binding typically spans an 81-fold change in target concentration, an effect that limits the utility of biosensors in applications calling for either great sensitivity (a steeper relationship between target concentration and output signal) or the quantification of more wide-ranging concentrations. In response, we have adapted strategies employed by nature to modulate the input-output response of its biorecognition systems to rationally edit the useful dynamic range of an artificial biosensor. By engineering a structure-switching mechanism to tune the affinity of a receptor molecule, we first generated a set of receptor variants displaying similar specificities but different target affinities. Using combinations of these receptor variants (signaling and nonsignaling), we then rationally extended (to 900000-fold), narrowed (to 5-fold), and edited (three-state) the normally 81-fold dynamic range of a representative biosensor. We believe that these strategies may be widely applicable to technologies reliant on biorecognition.

Effect of substrate inhibition and cooperativity on the electrochemical responses of glucose dehydrogenase. Kinetic characterization of wild and mutant types

Thanks to its insensitivity to dioxygen and to its good catalytic reactivity, and in spite of its poor substrate selectivity, quinoprotein glucose dehydrogenase (PQQ-GDH) plays a prominent role among the redox enzymes that can be used for analytical purposes, such as glucose detection, enzyme-based bioaffinity assays, and the design of biofuel cells. A detailed kinetic analysis of the electrochemical catalytic responses, leading to an unambiguous characterization of each individual steps, seems a priori intractable in view of the interference, on top of the usual ping-pong mechanism, of substrate inhibition and of cooperativity effects between the two identical subunits of the enzyme. Based on simplifications suggested by extended knowledge previously acquired by standard homogeneous kinetics, it is shown that analysis of the catalytic responses obtained by means of electrochemical nondestructive techniques, such as cyclic voltammetry, with ferrocene methanol as a mediator, does allow a full characterization of all individual steps of the catalytic reaction, including substrate inhibition and cooperativity and, thus, allows to decipher the reason that makes the enzyme more efficient when the neighboring subunit is filled with a glucose molecule. As a first practical illustration of this electrochemical approach, comparison of the native enzyme responses with those of a mutant (in which the asparagine amino acid in position 428 has been replaced by a cysteine residue) allowed identification of the elementary steps that makes the mutant type more efficient than the wild type when cooperativity between the two subunits takes place, which is observed at large mediator and substrate concentrations. A route is thus opened to structure-reactivity relationships and therefore to mutagenesis strategies aiming at better performances in terms of catalytic responses and/or substrate selectivity.

Technologies for continuous glucose monitoring: current problems and future promises

Devices for continuous glucose monitoring (CGM) are currently a major focus of research in the area of diabetes management. It is envisioned that such devices will have the ability to alert a diabetes patient (or the parent or medical care giver of a diabetes patient) of impending hypoglycemic/hyperglycemic events and thereby enable the patient to avoid extreme hypoglycemic/hyperglycemic excursions as well as minimize deviations outside the normal glucose range, thus preventing both life-threatening events and the debilitating complications associated with diabetes. It is anticipated that CGM devices will utilize constant feedback of analytical information from a glucose sensor to activate an insulin delivery pump, thereby ultimately realizing the concept of an artificial pancreas. Depending on whether the CGM device penetrates/breaks the skin and/or the sample is measured extracorporeally, these devices can be categorized as totally invasive, minimally invasive, and noninvasive. In addition, CGM devices are further classified according to the transduction mechanisms used for glucose sensing (i.e., electrochemical, optical, and piezoelectric). However, at present, most of these technologies are plagued by a variety of issues that affect their accuracy and long-term performance. This article presents a critical comparison of existing CGM technologies, highlighting critical issues of device accuracy, foreign body response, calibration, and miniaturization. An outlook on future developments with an emphasis on long-term reliability and performance is also presented.

Toward an injectable continuous osmotic glucose sensor

BACKGROUND

The growing pandemic of diabetes mellitus places a stringent social and economic burden on the society. A tight glycemic control circumvents the detrimental effects, but the prerogative is the development of new more effective tools capable of longterm tracking of blood glucose (BG) in vivo. Such discontinuous sensor technologies will benefit from an unprecedented marked potential as well as reducing the current life expectancy gap of eight years as part of a therapeutic regime.

METHOD

A sensor technology based on osmotic pressure incorporates a reversible competitive affinity assay performing glucose-specific recognition. An absolute change in particles generates a pressure that is proportional to the glucose concentration. An integrated pressure transducer and components developed from the silicon micro- and nanofabrication industry translate this pressure into BG data.

RESULTS

An in vitro model based on a 3.6 x 8.7 mm large pill-shaped implant is equipped with a nanoporous membrane holding 4-6 nm large pores. The affinity assay offers a dynamic range of 36-720 mg/dl with a resolution of +/-16 mg/dl. An integrated 1 x 1 mm(2) large control chip samples the sensor signals for data processing and transmission back to the reader at a total power consumption of 76 microW.

CONCLUSIONS

Current studies have demonstrated the design, layout, and performance of a prototype osmotic sensor in vitro using an affinity assay solution for up to four weeks. The small physical size conforms to an injectable device, forming the basis of a conceptual monitor that offers a tight glycemic control of BG.

Structure-based design of robust glucose biosensors using a Thermotoga maritima periplasmic glucose-binding protein

We report the design and engineering of a robust, reagentless fluorescent glucose biosensor based on the periplasmic glucose-binding protein obtained from Thermotoga maritima (tmGBP). The gene for this protein was cloned from genomic DNA and overexpressed in Escherichia coli, the identity of its cognate sugar was confirmed, ligand binding was studied, and the structure of its glucose complex was solved to 1.7 Angstrom resolution by X-ray crystallography. TmGBP is specific for glucose and exhibits high thermostability (midpoint of thermal denaturation is 119 +/- 1 degrees C and 144 +/- 2 degrees C in the absence and presence of 1 mM glucose, respectively). A series of fluorescent conjugates was constructed by coupling single, environmentally sensitive fluorophores to unique cysteines introduced by site-specific mutagenesis at positions predicted to be responsive to ligand-induced conformational changes based on the structure. These conjugates were screened to identify engineered tmGBPs that function as reagentless fluorescent glucose biosensors. The Y13C*Cy5 conjugate is bright, gives a large response to glucose over concentration ranges appropriate for in vivo monitoring of blood glucose levels (1-30 mM), and can be immobilized in an orientation-specific manner in microtiter plates to give a reversible response to glucose. The immobilized protein retains its response after long-term storage at room temperature.

Electrospun poly(vinylidene fluoride)/poly(aminophenylboronic acid) composite nanofibrous membrane as a novel glucose sensor

Electrospinning was used to prepare the nanofibrous membrane (NFM) of the composite comprising poly(vinylidene fluoride) and poly(aminophenylboronic acid) (PVdF/PAPBA-NFM). The PVdF/PAPBA-NFM displayed an excellent linear response to the detection of glucose for the concentration range of 1 to 15mM with a response time of less than 6s. Further experiments on amperometric sensing of glucose were performed in the presence of interferents such as uric acid, ascorbic acid, acetaminophen, fructose, mannose, etc. using PVdF/PAPBA-NFM. The interferents did not give significant overlapping current signal during the determination of glucose. Also, PVdF/PAPBA-NFM possesses better reproducibility toward glucose detection and storage stability.

Cloning and functional expression of glucose dehydrogenase complex of Burkholderia cepacia in Escherichia coli

The thermostable glucose dehydrogenase (GDH) from Burkholderia cepacia sp. SM4 is composed of a catalytic subunit (alpha), an electron transfer subunit (beta), and a small gamma subunit of unknown function. We cloned a 1428-nucleotide gene encoding the beta subunit located immediately downstream of the alpha subunit. This completes the isolation of the genes encoding the three components of the GDH complex, which are clustered very close together with the same transcription polarity in the order gammaalphabeta. The deduced beta subunit amino acid sequence contains three typical heme-binding motifs and was 44-49% identical to the cytochrome c subunits of other FAD-dependent dehydrogenase complexes. The GDHgammaalphabeta complex of B. cepacia was successfully expressed in a fully active form in Escherichia coli by co-expression with cytochrome c maturation genes. Recombinant expression of the GDH complex was also found to restore glucose-dependent respiration in a GDH mutant of E. coli.

Chiral electrochemical recognition by very thin molecularly imprinted sol-gel films

Thin films with enantioselective properties for electrochemically active chiral probes were developed. Enantioselectivity was accomplished via molecular imprinting. The films were fabricated through the sol-gel technique and were spin-coated on ITO electrodes. The chiral selectivity recognition was detected using two enantiomer pairs: D- and L-3,4-dihydroxyphenylalanine (D- and L-dopa) and (R)- and (S)-N,N'-dimethylferrocenylethylamine [(R)-Fc and (S)-Fc]. A defined chiral cavity was obtained by selection of functional monomers that interact with the template molecule, followed by its removal. Chiral selection properties were measured by cyclic voltammetry and square wave voltammetry. For both template molecules, very good chiral recognition was revealed by electrochemical measurement. The nonspecific adsorption measured for reference nonimprinted films was negligible (less than 5%). Dopa imprinted films revealed both high sensitivity, by the detection of 1 nM (0.2 ppb) concentration, and excellent selectivity, when challenged with a series of catechol derivatives. Fc-imprinted films were able to detect ca. 2 ppm of the target molecule, with very good enantioselectivity and low nonspecific adsorption. To our knowledge, this is the first report of successful molecular imprinting of a ferrocene derivative.

Determination of enzyme mechanisms by molecular dynamics: studies on quinoproteins, methanol dehydrogenase, and soluble glucose dehydrogenase

Molecular dynamics (MD) simulations have been carried out to study the enzymatic mechanisms of quinoproteins, methanol dehydrogenase (MDH), and soluble glucose dehydrogenase (sGDH). The mechanisms of reduction of the orthoquinone cofactor (PQQ) of MDH and sGDH involve concerted base-catalyzed proton abstraction from the hydroxyl moiety of methanol or from the 1-hydroxyl of glucose, and hydride equivalent transfer from the substrate to the quinone carbonyl carbon C5 of PQQ. The products of methanol and glucose oxidation are formaldehyde and glucolactone, respectively. The immediate product of PQQ reduction, PQQH- [-HC5(O-)-C4(=O)-] and PQQH [-HC5(OH)-C4(=O)-] converts to the hydroquinone PQQH2 [-C5(OH)=C4(OH)-]. The main focus is on MD structures of MDH * PQQ * methanol, MDH * PQQH-, MDH * PQQH, sGDH * PQQ * glucose, sGDH * PQQH- (glucolactone, and sGDH * PQQH. The reaction PQQ-->PQQH- occurs with Glu 171-CO2- and His 144-Im as the base species in MDH and sGDH, respectively. The general-base-catalyzed hydroxyl proton abstraction from substrate concerted with hydride transfer to the C5 of PQQ is assisted by hydrogen-bonding to the C5=O by Wat1 and Arg 324 in MDH and by Wat89 and Arg 228 in sGDH. Asp 297-COOH would act as a proton donor for the reaction PQQH(-)-->PQQH, if formed by transfer of the proton from Glu 171-COOH to Asp 297-CO2- in MDH. For PQQH-->PQQH2, migration of H5 to the C4 oxygen may be assisted by a weak base like water (either by crystal water Wat97 or bulk solvent, hydrogen-bonded to Glu 171-CO2- in MDH and by Wat89 in sGDH).

A novel glucose biosensor based on the nanoscaled cobalt phthalocyanine–glucose oxidase biocomposite

We report on the utilization of a novel nanoscaled cobalt phthalocyanine (NanoCoPc)-glucose oxidase (GOD) biocomposite colloid to create a highly responsive glucose biosensor. The biocomposite colloid is constructed under enzyme-friendly conditions by adsorbing GOD molecules on CoPc nanoparticles via electrostatic interactions. The glucose biosensor can be easily achieved by casting the biocomposite colloid on a pyrolytic graphite electrode (PGE) without any auxiliary matter. It has been found that GOD can be firmly immobilized on PGE surface and maintain its bioactivity after conjugating with NanoCoPc. NanoCoPc displays intrinsic electrocatalytic ability to the oxidation of the product of enzymatic reaction H2O2 and shows a higher catalytic activity than that of bulk CoPc. Under optimal conditions, the biosensor shows a wide linear response to glucose in the range of 0.02-18 mM, with a fast response (5s), high sensitivity (7.71 microA cm(-2) mM(-1)), as well as good thermostability and long-term life. The detection limit was 5 microM at 3 sigma. The general interferences coexisted in blood except ascorbic acid and L-cysteine do not affect glucose determination, and further coating Nafion film on the surface of the biosensor can effectively eliminate the interference from ascorbic acid and L-cysteine. The biosensor with Nafion film has been used for the determination of glucose in serum with an acceptable accuracy.

Modeling of homogeneous cloned enzyme donor immunoassay

One of the most widely used analytical techniques for sensitive detection of biologically and clinically significant analytes is the immunoassay. In recent years direct immunoprobes allowing label-free detection of the interaction between the antibody and the target analyte have proved their capabilities as fast, simple, and nevertheless highly sensitive methods. Cloned enzyme donor immunoassay (CEDIA) homogeneous assay is based on the bacterial enzyme beta-galactosidase, which has been genetically engineered into two inactive fragments, enzyme donor and enzyme acceptor. Reassociation of the fragments in the assay forms active enzyme, which acts on substrate to generate a colored product. A comprehensive kinetic model of CEDIA is developed to aid in understanding this method and to facilitate development of a truly homogeneous version, potentially applicable to a dipstick-type multianalyte point of care analytical device (ChemChip). Although the standard assay involves a two-step process, we also chose to model a single-combined process, which would be simpler to apply in a ChemChip device. From the modeling simulation, we obtain the time courses of the amounts of product and active enzyme, from which the dynamic ranges can be obtained as 10(-6)-10(-7) and 10(-5)-10(-7)M analyte concentration for two-step and single-combined processes under the conditions of the assumed parameters, respectively. A simple one-step immunoassay has the merit of reducing time and cost and has an improved dynamic range.

The correlation of the complex dielectric constant and blood glucose at low frequency

A new needle-type sample cell was designed and produced to investigate the correlation between blood glucose and electrical parameters using an impedance analyzer. The characteristics of the measurement cells were optimized to give high sensitivity. High sensitivity complex dielectric constant measurements were obtained by calibration with several known fluids. It was observed that the values of the real (epsilon') and the imaginary (epsilon") dielectric constant increase with decreasing glucose contents in the water/glucose system, and that the value of epsilon' in hamster tail changes according to the variation in blood glucose. It is likely that there is a correlation between blood glucose and the value of epsilon', the electrical parameter.

Bioelectrocatalysis-based application of quinoproteins and quinoprotein-containing bacterial cells in biosensors and biofuel cells

Electrochemical studies on the applied aspects of quinoproteins are briefly reviewed. Catalytic reactions of quinoprotein enzymes can be connected to electrochemical reactions directly or by the mediation of molecules functioning as electron acceptors of the enzymes. Such an enzyme-electrochemical reaction is called bioelectrocatalysis. It provides a novel method of kinetic analysis of enzyme catalysis and even whole bacterial cell catalysis. The principle of bioelectrocatalysis is first described, then, the bioelectrocatalysis-based application of quinoproteins in biosensors is mentioned. Characteristics and performance of this type of biosensor is explained by citing our own work. Possible application in bioreactors and biofuel cells is also mentioned.

Cloning and expression of the gene encoding catalytic subunit of thermostable glucose dehydrogenase from Burkholderia cepacia in Escherichia coli

We have cloned a 1620-nucleotide gene encoding the catalytic subunit (alpha subunit) of a thermostable glucose dehydrogenase (GDH) from Burkholderia cepacia. The FAD binding motif was found in the N-terminal region of the alpha subunit. The deduced primary structure of the alpha subunit showed about 48% identity to the catalytic subunits of sorbitol dehydrogenase (SDH) from Gluconobacter oxydans and 2-keto-D-gluconate dehydrogenases (2KGDH) from Erwinia herbicola and Pantoea citrea. The alpha subunit of B. cepacia was expressed in Escherichia coli in its active water-soluble form, showing maximum dye-mediated GDH activity at 70 degrees C, retaining high thermal stability. A putative open reading frame (ORF) of 507 nucleotides was also found upstream of the alpha subunit encoding an 18-kDa peptide, designated as gamma subunit. The deduced primary structure of gamma subunit showed about 30% identity to the small subunits of the SDH from G. oxydans and 2KGDHs from E. herbicola and P. citrea.

Escherichia coli and its application in a mediated amperometric glucose sensor

Escherichia coli cells, which contain apo-glucose dehydrogenase, were used in constructing a mediated amperometric glucose sensor. The E. coli modified glucose sensor, which was prepared by immobilizing E. coli cells behind a dialysis membrane on a carbon paste electrode containing 2,3-dimethoxy-5-methyl-1,4-benzoquinone (Q(0)), produced a current for the electrocatalytic oxidation of glucose with Q(0) as an electron transfer mediator only after the addition of a trace amount of pyrroloquinoline quinone (PQQ), the cofactor of the enzyme. This allows a novel method of glucose measurements free from the interference of the redox active substances, if contained, in a sample solution. The glucose sensor was insensitive to dioxygen; the currents measured under anaerobic and aerobic conditions, and even under dioxygen saturated conditions were almost the same in magnitude at a given concentration of glucose over the range of 0.2-10 mM. Response time of the glucose sensor was 2 min to attain 90% level of the steady-state current. The E. coli modified glucose sensor was reusable when treated with ethylenediaminetetraacetic acid (EDTA). When E. coli cells were lyophilized, they could be stored at room temperature in a dry box for more than six months without loss of the catalytic activity.

A novel fluorescence competitive assay for glucose determinations by using a thermostable glucokinase from the thermophilic microorganism Bacillus stearothermophilus

We describe the use of a thermostable glucokinase in a novel competitive fluorescence assay for glucose. Glucokinase from Bacillus stearothermophilus (BSGK) was found to retain enzymatic activity in solution for over 20 days. The single cysteine residue in BSGK, which is near the active site, was labeled with a fluorescent probe, 2-(4-iodoacetamidoanilino)naphthalene-6-sulfonic acid. The ANS-labeled BSGK displayed a modest 25% decrease in the emission intensity upon binding glucose but no change in lifetime. To obtain a larger spectral change we developed a competitive assay for glucose using the intrinsic tryptophan fluorescence from BSGK and a resonance energy transfer (RET) acceptor-labeled sugar. The sugar-labeled acceptor quenched the BSGK tryptophan emission, and the quenching was reversed upon addition of glucose. The use of RET as the sensing mechanism can be easily extended to longer wavelengths for a more practical glucose sensor.

Improved sensitivity of a histamine sensor using an engineered methylamine dehydrogenase

Methylamine dehydrogenase (MADH) may be immobilized in a polypyrrole (PPy) film on an electrode surface and used as an amperometric sensor for the determination of histamine. Using site-directed mutagenesis, phenylalanine 55 on the alpha subunit of MADH was converted to alanine. This alphaF55A MADH exhibits a 400-fold lower Km value for histamine than does native MADH when assayed in solution. An alphaF55A MADH-PPy sensor was constructed, and its properties were compared to that of the native MADH-PPy sensor. The alphaF55A MADH immobilized on the electrode exhibited Michaelis-Menten behavior in response to varied concentrations of histamine with an approximately 3-fold lower Km value than that exhibited by the immobilized native MADH. The detection limit for the native MADH-PPy sensor was approximately 20 microM while the alphaF55A MADH-PPy sensor exhibited a detection limit of approximately 5 microM, a 4-fold increase compared to the native MADH-PPy sensor. This work highlights the potential value of using site-directed mutagenesis to engineer enzymes to alter and improve biosensor performance.