Sulfur-doped graphene quantum dots as a novel fluorescent probe for highly selective and sensitive detection of Fe(3+)

Chitosan-initiated gold nanoparticles with enhanced fluorescence for unique Fe3+/PPi sensing and photothermal therapy

The design of surface ligands is crucial for ligand-protected gold nanoparticles (AuNPs). Herein, following the principle of green synthesis, environmentally friendly gold nanoparticles (AuNPs@His@CC, AuHC) were fabricated based on dual ligands of histidine and carboxylated chitosan. AuHC showed the advantages of low toxicity, good photoluminescent stability and ideal biocompatibility. Compared with single histidine-coated gold nanoclusters (AuNCs@His, AuH), AuHC presented enhanced fluorescence attributed to the addition of chitosan. The blue-emitting AuHC has a unique response to Fe3+ with detection limits as low as 9.51 nM. Interestingly, the quenched fluorescence of AuHC-Fe3+ system could be restored through the introduction of PPi with a detection limit of 10.6 μM. So an "on-off-on" fluorescence sensing platform was achieved. Apart from good optical properties and sensing, the designed AuHC demonstrated outstanding photothermal conversion efficiency (27.8 %), which made it ideal material for thermal ablation of tumor. To be specific, after laser irradiation (660 nm, 0.78 W cm-2, 10 min) of AuHC, the survival rate of HeLa cells as a tumor cell model decreased to 12.7 %, indicating that AuHC has a significant tumor inhibition effect in vitro. Besides, AuHC also could be a befitting candidate for overcoming drug-resistant tumor cells such as MCF-7/ADR cells. Notably, AuHC can markedly ablate solid tumors in 4T1 tumor-bearing mice after laser irradiation (660 nm, 0.78 W cm-2, 10 min). Hence this work provides insight into the design of multifunctional AuNPs platform for simultaneously integrating the ion sensing and photothermal therapy of cancer.

Insights into the optoelectronic behaviour of heteroatom doped diamond-shaped graphene quantum dots

In this study we aim to manipulate the optoelectronic and photoluminescence properties of diamond-shaped graphene quantum dots (DSGQDs) in order to make them suitable for solar cells and photovoltaic devices. Using DFT and performing many-body effects studies, we investigate the impact of N, B, O, P and S heteroatom doping on DSGQDs in three different positions, namely the zigzag edge, the armchair corner and the surface, in order to identify the most appropriate and promising configurations. All the doped GQDs are found to be chemically stable making it possible to realize them experimentally. Additionally, the obtained results show that substitution with heteroatoms has a remarkable effect on the electronic energy gap, noticeably decreasing it. Doping also has a significant effect on the optical response by shifting the absorption peaks towards the visible energy range. The excitonic behaviour has revealed that these nanostructures are potential candidates for photovoltaic devices. One can deduce that doping DSGQDs with heteroatoms is useful and promising for the targeted applications.

Biophilic Positive Carbon Dot Exerts Antifungal Activity and Augments Corneal Permeation for Fungal Keratitis

Fungal keratitis (FK) is an infectious eye disease that poses a significant risk of blindness. However, the effectiveness of conventional antifungal drugs is limited due to the intrinsic ocular barrier that impedes drug absorption. There is an urgent need to develop new therapeutic strategies to effectively combat FK. Herein, we synthesized an ultrasmall positively charged carbon dot using a simple stage-melting method. The carbon dot can penetrate the corneal barrier by opening the tight junctions, allowing them to reach the lesion site and effectively kill the fungi. The results both in vitro and in vivo demonstrated that it exhibited good biocompatibility and antifungal activity, significantly improving the therapeutic effect in a mouse model of FK. Therefore, this biophilic ultrasmall size and positive carbon dot, characterized by its ability to penetrate the corneal barrier and its antifungal properties, may offer valuable insights into the design of effective ocular nanomedicines.

Development of fluorescent GO-AgNPs-Eu3+ nanoparticles based paper visual sensor for foodborne spores detection

Foodborne spores are ubiquitous with extremely strong resistance, and pose a serious threat to food safety and human health. Therefore, rapid, sensitive, and selective detection of spores are crucial. In this study, a fluorescent probe was developed based on lanthanide ion (Eu3+)-labeled nano-silver-modified graphene oxide (GO-AgNPs-Eu3+) for the detection of 2,6-dipicolinic acid (DPA), a biomarker unique to spores, to allow quantitative spores detection. The GO-AgNPs-Eu3+ nano-fluorescent probe was loaded onto a polyvinylidene fluoride microfiltration membrane, and a smartphone-assisted portable GO-AgNPs-Eu3+ nanoparticles-based paper visual sensor was designed for rapid on-site quantitative and real-time online detection of spores. The results indicated that the developed probe achieved equilibrium binding with DPA within 5 min, and enhanced fluorescence emission through antenna effect. The fluorescence detection presented a good linear relationship in the DPA concentration range of 0-45 μM, with a DPA detection limit of 4.62 nM and spore detection limit of 104 cfu/mL. The developed sensor showed a change in fluorescence from blue to red with increasing DPA concentration, and this color change was quantitatively detected through smartphone RGB variations, with a detection limit of 13.1 μM for DPA and 6.3 cfu/mL for Bacillus subtilis spores. Subsequently, the sensitivity and selectivity of the developed sensor were verified using actual milk and water samples spiked with B. subtilis spores. The results of this study provided objective technological support for rapid detection of spores, which is important for reducing the occurrence of foodborne diseases and improving food safety.

The Emerging Star of Carbon Luminescent Materials: Exploring the Mysteries of the Nanolight of Carbon Dots for Optoelectronic Applications

Carbon dots (CDs), a class of carbon-based nanomaterials with dimensions less than 10 nm, have attracted significant interest since their discovery. They possess numerous excellent properties, such as tunability of photoluminescence, environmental friendliness, low cost, and multifunctional applications. Recently, a large number of reviews have emerged that provide overviews of their synthesis, properties, applications, and their composite functionalization. The application of CDs in the field of optoelectronics has also seen unprecedented development due to their excellent optical properties, but reviews of them in this field are relatively rare. With the idea of deepening and broadening the understanding of the applications of CDs in the field of optoelectronics, this review for the first time provides a detailed summary of their applications in the field of luminescent solar concentrators (LSCs), light-emitting diodes (LEDs), solar cells, and photodetectors. In addition, the definition, categories, and synthesis methods of CDs are briefly introduced. It is hoped that this review can bring scholars more and deeper understanding in the field of optoelectronic applications of CDs to further promote the practical applications of CDs.

Tumor diagnosis using carbon-based quantum dots: Detection based on the hallmarks of cancer

Carbon-based quantum dots (CQDs) have been shown to have promising application value in tumor diagnosis. Their use, however, is severely hindered by the complicated nature of the nanostructures in the CQDs. Furthermore, it seems impossible to formulate the mechanisms involved using the inadequate theoretical frameworks that are currently available for CQDs. In this review, we re-consider the structure-property relationships of CQDs and summarize the current state of development of CQDs-based tumor diagnosis based on biological theories that are fully developed. The advantages and deficiencies of recent research on CQDs-based tumor diagnosis are thus explained in terms of the manifestation of nine essential changes in cell physiology. This review makes significant progress in addressing related problems encountered with other nanomaterials.

Facile synthesis of NS-doped carbon dots as sensitive "ON-OFF-ON" fluorescent sensor for Cu2+ and GSH detection

In this paper, a novel nitrogen and sulfur co-doped carbon quantum dots (NS-CQDs) were successfully prepared by a dehydration exothermic carbonization method. The NS-CQDs exhibited uniform size distribution, splendid photostability, and bright fluorescence emission with a fluorescence quantum yield of 24.1 %. It was found that Cu2+ could quench the fluorescence at 467 nm based on the static quenching effect when Cu2+ was added to the NS-CQDs. At this time, the fluorescence sensor changed from the "ON" state to the "OFF" state. When glutathione (GSH) was further introduced into the NS-CQDs/Cu2+ system, the fluorescence intensity of NS-CQDs was amazingly restored through the coordination reaction between GSH and Cu2+. The fluorescence sensor changed from the "OFF" state to the "ON" state. Therefore, NS-CQDs as an "ON-OFF-ON" fluorescence sensor was designed for sequential detection of Cu2+ and GSH. Furthermore, this study successfully demonstrated the sensor's ability to selectively detect Cu2+ and GSH within a wide concentration range. Specifically, the detection range for Cu2+ was 0.1 μM-200.0 μM with a detection limit of 0.07 μM, while the range for GSH was 0.6 μM-180.0 μM with a detection limit of 0.1 μM. Most importantly, the NS-CQDs nanosensor could reliably monitor Cu2+ and GSH levels in human serum samples, with significant potential for practical applications.

An Ultra-low Detection Limit Fe3+ Optical Fiber Fluorescent Sensor Based on a Anti-B18H22 Derivative with Aggregation-induced Emission Enhancement

A fluorescent Fe3+ probe ((C10H7NO2)2B18H20, M1) by introducing two isoquinoline-1-carboxylic acid group into the 6,9-position of anti-B18H22 was designed and synthesized. The structure of M1 was investigated by 1H NMR, MS, FT-IR and theoretical calculation, and its optical properties were characterized with UV-Vis and PL. M1 showed aggregation induced emission enhancement (AIEE) properties in THF/H2O solution, and exhibited an excellent selectivity toward Fe3+ in THF/H2O (v/v, ƒw = 95%) solution with a detection limit of 1.93 × 10-5 M. The interaction mechanism of probe for detecting Fe3+ is attributed to the involvement of intramolecular charge transfer (ICT) process. Furthermore, a optical fiber fluorescent Fe3+ sensor based on M1 sensing film was developed, the detection limit of the optical fiber Fe3+ fluorescent sensor could be improved to13.8 pM, the ultra-low detection limit is superior to most reported fluorescent probes (or sensors) towards Fe3+. This method has the advantages of high sensitivity, anti-interference and easy to operate, and has great potential in the field of the analysis of environmental and biological samples.

Quantum dots: a tool for the detection of explosives/nitro derivatives

Nitro derivatives are considered as major environmental pollutants and issues of health concern. In current times, a variety of methods and techniques have been utilized for the sensing of these nitro derivatives. In view of this, the remarkable fluorescence properties of quantum dots (QDs) provide a great opportunity to detect these nitro derivatives. This review highlighted the recent reports of QDs as the sensing material for these nitro derivative explosives. Different modifications in QDs using physical and chemical approaches can be used to improve their sensing output. Various interaction mechanisms have been discussed between QDs and nitro derivatives to change their fluorescence properties. Finally, the current challenges and the perspective for the forthcoming future are provided in the concluding section. We hope this review will be beneficial in guiding the utilization of QDs in sensing applications.

Red Emission Carbon Nanoparticles Which Can Simultaneously Responding to Hypochlorite and pH

Multi-targets detection has obtained much attention because this sensing mode can realize the detection of multi-targets simultaneously, which is helpful for biomedical analysis. Carbon nanoparticles have attracted extensive attention due to their superior optical and chemical properties, but there are few reports about red emission carbon nanoparticles for simultaneous detection of multi-targets. In this paper, a red emission fluorescent carbon nanoparticles were prepared by 1, 2, 4-triaminobenzene dihydrochloride at room temperature. The as-prepared red emission fluorescent carbon nanoparticles exhibited strong emission peak located at 635 nm with an absolute quantum yield up to 24%. They showed excellent solubility, high photostability and good biocompatibility. Furthermore, it could sensitively and selectively response to hypochlorite and pH, thus simultaneous detection of hypochlorite and pH was achieved by combining the red emission fluorescent carbon nanoparticles with computational chemistry. The formation mechanisms of red emission fluorescent carbon nanoparticles and their response to hypochlorite and pH were investigated, respectively.

From Pristine to Heteroatom-Doped Graphene Quantum Dots: An Essential Review and Prospects for Future Research

Graphene quantum dots (GQDs) are carbon-based zero-dimensional materials that have received considerable scientific interest due to their exceptional optical, electrical, and optoelectrical properties. Their unique electronic band structures, influenced by quantum confinement and edge effects, differentiate the physical and optical characteristics of GQDs from other carbon nanostructures. Additionally, GQDs can be synthesized using various top-down and bottom-up approaches, distinguishing them from other carbon nanomaterials. This review discusses recent advancements in GQD research, focusing on their synthesis and functionalization for potential applications. Particularly, various methods for synthesizing functionalized GQDs using different doping routes are comprehensively reviewed. Based on previous reports, current challenges and future directions for GQDs research are discussed in detail herein.

Inorganic Sonosensitizers for Sonodynamic Therapy in Cancer Treatment

The rapid development of nanomedicine and nanobiotechnology has allowed the emergence of various therapeutic modalities with excellent therapeutic efficiency and biosafety, among which, the sonodynamic therapy (SDT), a combination of low-intensity ultrasound and sonosensitizers, is emerging as a promising noninvasive treatment modality for cancer treatment due to its deeper penetration, good patient compliance, and minimal damage to normal tissue. The sonosensitizers are indispensable components in the SDT process because their structure and physicochemical properties are decisive for therapeutic efficacy. Compared to the conventional and mostly studied organic sonosensitizers, inorganic sonosensitizers (noble metal-based, transition metal-based, carbon-based, and silicon-based sonosensitizers) display excellent stability, controllable morphology, and multifunctionality, which greatly expand their application in SDT. In this review, the possible mechanisms of SDT including the cavitation effect and reactive oxygen species generation are briefly discussed. Then, the recent advances in inorganic sonosensitizers are systematically summarized and their formulations and antitumor effects, particularly highlighting the strategies for optimizing the therapeutic efficiency, are outlined. The challenges and future perspectives for developing state-of-the-art sonosensitizers are also discussed. It is expected that this review will shed some light on future screening of decent inorganic sonosensitizers for SDT.

CdS Semiconductor Quantum Dots; Facile Synthesis, Application as Off Fluorescent Sensor for Detection of Lead (Pb2+) Ions and Catalyst for Degradation of Dyes from Water

The CdS quantum dots (QDs) were prepared by rapid, one-pot, and novel photochemical method, which used Thioglycolic acid (TGA) molecules as both stabilizer and sulfur source. The structure and morphology of the prepared CdS QDs were characterized by different analyses such as XRD, FT-IR, Raman, EDS, TEM, PL, and absorption. In this work, was used of CdS QDs as off fluorescence sensor for rapid and simple detection of lead (Pb2+) ions in water. The PL intensity of CdS QDs in the presence of lead ions decreased gradually and in the presence of 100 μM lead ions, photo emission completely quenched. The photocatalyst performance of CdS QDs was investigated by methylene blue (MB), methylene orange (MO), and rhodamine b (RB) pollutant dyes under both UV and sun lights. The obtained results showed that CdS QDs had excellent photocatalyst activity with dyes under UV light and 94.9% of MO dye, 94.4% of RB dye, and 81.2% of MB was degraded after 60 min UV irradiation. For understanding about which parameter have a key role in the photodegradation process of MO by CdS QDs under UV illumination, several radical scavengers were used, and results showed that holes have a key role in the degradation process.

Improving the efficiency of metal ions doped Fe2O3 nanoparticles: Photocatalyst for removal of organic dye from aqueous media

The metal ion-based nanocomposite photocatalysts were accepted to exhibit a wide range of photocatalytic and biological applications. In this paper, we synthesize bare Fe₂O₃, 1 wt% metal (Ag, Co, and Cu) doped Fe₂O₃ nanoparticles (NPs) using a simple hydrothermal process and wet impregnation method. The as-prepared nanomaterials crystalline structure, shape, optical characteristics, and elemental composition were determined by using X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Energy-dispersive X-ray (EDS) and Transmission electron microscopy (TEM) techniques. Furthermore, the synthesized nanocomposites were utilized as a photosensitizer for the degradation of reactive red (RR120) and orange II (O-II) dyes under sunlight irradiation. The synthesized 1 wt% Ag-Fe₂O₃ (AgF) NPs samples exhibit a more exceptional catalytic performance of RR120 and O-II dyes (98.32%) within 120 min than the existing Fe₂O₃, 1 wt% Co-Fe₂O₃, and Cu-Fe₂O₃ NPs. The effect of parameters such as exciton formation under solar irradiation, charge recombination rate, and surface charge availability. The metal oxide-doped nanocomposite economic relevance is revealed by their long-term durability and recyclability in photodegradation reactions. The photocatalytic investigations show that the active species O₂^∙-, HO^∙ and h⁺ play an important role in the dye degradation process. This research might pave the opportunity for the sustainable development of greater photocatalysts for photodegradation and a wide range of environmental applications.

Investigating the Theranostic Potential of Graphene Quantum Dots in Alzheimer's Disease

Alzheimer's disease (AD) is one of the leading causes of death worldwide, with no definitive diagnosis or known cure. The aggregation of Tau protein into neurofibrillary tangles (NFTs), which contain straight filaments (SFs) and paired helical filaments (PHFs), is a major hallmark of AD. Graphene quantum dots (GQDs) are a type of nanomaterial that combat many of the small-molecule therapeutic challenges in AD and have shown promise in similar pathologies. In this study, two sizes of GQDs, GQD7 and GQD28, were docked to various forms of Tau monomers, SFs, and PHFs. From the favorable docked poses, we simulated each system for at least 300 ns and calculated the free energies of binding. We observed a clear preference for GQD28 in the PHF6 (³⁰⁶VQIVYK³¹¹) pathological hexapeptide region of monomeric Tau, while GQD7 targeted both the PHF6 and PHF6* (²⁷⁵VQIINK²⁸⁰) pathological hexapeptide regions. In SFs, GQD28 had a high affinity for a binding site that is available in AD but not in other common tauopathies, while GQD7 behaved promiscuously. In PHFs, GQD28 interacted strongly near the protofibril interface at the putative disaggregation site for epigallocatechin-3-gallate, and GQD7 largely interacted with PHF6. Our analyses revealed several key GQD binding sites that may be used for detecting, preventing, and disassembling the Tau aggregates in AD.

Effect of hetero-atom doping on the electrocatalytic properties of graphene quantum dots for oxygen reduction reaction

Oxygen reduction is an important reaction involved in a diverse variety of energy storage devices and also in many chemical and biological processes. However, the high cost of suitable catalysts like platinum, rhodium, and iridium proves to be a major obstacle for its commercialization. Consequently, many new materials have emerged in recent years such as various forms of carbon, carbides, nitrides, core–shell particles, Mxenes, and transition metal complexes as alternatives to platinum and other noble metals for oxygen reduction reaction (ORR). Among these, Graphene Quantum Dots (GQDs) as metal-free alternatives have captured universal attention, since electrocatalytic properties can be tuned not only by size and functionalization but by heteroatom doping also. We discuss electrocatalytic properties of GQDs (approximate size 3–5 nm) with specific dopants such as N and S focusing on their synergistic effects of co-doping, prepared by solvothermal routes. Cyclic Voltammetry shows benefits of doping as lowering of the onset potentials while steady-state Galvanostatic Tafel polarization measurements show a clear difference in the apparent Tafel slope, along with enhanced exchange current densities, suggesting higher rate constants.

Polyethyleneimine-induced fluorescence enhancement strategy for AIEgen: the mechanism and application

Aggregation-induced emission luminogens (AIEgens) are attracting extensive research attention in the biosensor fields. Herein, we report a new polyethyleneimine (PEI)-induced strategy for enhancing luminescence of TCBPE (an AIEgen) to promote its development in biosensor. The copolymer dots (TCBPE-PEI) with high quantum yield (39.7%) and outstanding stability were synthesized via a one-pot method. The fluorescence enhancement mechanism based on the PEI strategy originated from the restriction of intramolecular motions of TCBPEs and the form of donor-acceptor structures to decrease the inherent energy bandgap. Benefiting from chelating property of TCBPE-PEI by Cu²⁺, a fluorescence-quenching sensor for Cu²⁺ detection was developed based on the fluorescence quenching of the electron transfer effect. Especially, a good linear range of 10-250 nM with a low limit of detection 1.1 nM was achieved, and it was further applied in samples successfully. The current work provides a novel approach to fabricate AIEgen biosensors and shows great potential in Cu²⁺ detection.

Fabrication of P and N Co-Doped Carbon Dots for Fe3+ Detection in Serum and Lysosomal Tracking in Living Cells

Doping with heteroatoms allows the retention of the general characteristics of carbon dots while allowing their physicochemical and photochemical properties to be effectively modulated. In this work, we report the preparation of ultrastable P and N co-doped carbon dots (PNCDs) that can be used for the highly selective detection of Fe³⁺ and the tracking of lysosomes in living cells. Fluorescent PNCDs were facilely prepared via a hydrothermal treatment of ethylenediamine and phytic acid, and they exhibited a high quantum yield of 22.0%. The strong coordination interaction between the phosphorus groups of PNCDs and Fe³⁺ rendered them efficient probes for use in selective Fe³⁺ detection, with a detection limit of 0.39 μM, and we demonstrated their practicability by accurately detecting the Fe³⁺ contents in bio-samples. At the same time, PNCDs exhibited high lysosomal location specificity in different cell lines due to surface lipophilic amino groups, and real-time tracking of the lysosome morphology in HeLa cells was achieved. The present work suggests that the fabrication of heteroatom-doped CDs might be an effective strategy to provide promising tools for cytology, such as organelle tracking.

Novel schiff base as Fe3+ sensor as well as an antioxidant and its theoretical studies

A novel Schiff base derivative L (N1-(thiophene-2-ylmethylene)benzene-1,2-diamine) was synthesized via condensation reaction of 3-thiophene carboxaldehyde and 1,2-diamino benzene. The synthesized compound was authenticated using 1 H NMR, 13 C NMR, HRMS, and IR spectroscopy. The compound L was found to be a Fe3+ sensor with the complexation ratio of 1 : 3 as revealed by Job’s plot with maximum absorption at 318 nm. The photophysical properties were studied using absorption and emission spectra. DFT and TD-DFT studies were carried out in order to support the photophysical outcomes of compound L. An antioxidant behaviour of compound L was studied using TAC, FRAP, and DPPH assays and it was found to be showing better TAC activity than the used standard i.e. gallic acid.

Plasma Nanoengineering of Bioresource-Derived Graphene Quantum Dots as Ultrasensitive Environmental Nanoprobes

Environmental contamination and energy shortage are among the most critical global issues that require urgent solutions to ensure sustainable ecological balance. Rapid and ultrasensitive monitoring of water quality against pollutant contaminations using a low-cost, easy-to-operate, and environmentally friendly technology is a promising yet not commonly available solution. Here, we demonstrate the effective use of plasma-converted natural bioresources for environmental monitoring. The energy-efficient microplasmas operated at ambient conditions are used to convert diverse bioresources, including fructose, chitosan, citric acid, lignin, cellulose, and starch, into heteroatom-doped graphene quantum dots (GQDs) with controlled structures and functionalities for applications as fluorescence-based environmental nanoprobes. The simple structure of citric acid enables the production of monodispersed 3.6 nm averaged-size GQDs with excitation-independent emissions, while the saccharides including fructose, chitosan, lignin, cellulose, and starch allow the synthesis of GQDs with excitation-dependent emissions due to broader size distribution. Moreover, the presence of heteroatoms such as N and/or S in the chemical structures of chitosan and lignin coupled with the highly reactive species generated by the plasma facilitates the one-step synthesis of N, S-codoped GQDs, which offer selective detection of toxic environmental contaminants with a low limit of detection of 7.4 nM. Our work provides an insight into the rapid and green fabrication of GQDs with tunable emissions from natural resources in a scalable and sustainable manner, which is expected to generate impact in the environmental safety, energy conversion and storage, nanocatalysis, and nanomedicine fields.

Electrochemical control of emission enhancement in solid-state nitrogen-doped carbon quantum dots

Because of their excellent optical and electrical properties, doped carbon quantum dots (CQDs) are expected to be used in novel film optoelectronic devices such as light-emitting diodes and solar cells. However, these device advancements are currently hindered by the elusive photophysical process of doped CQDs in solid-state films. Here, the optical properties of nitrogen-doped CQD (N-CQD) films are studied using spectro-electrochemical (SEC) methods. A distinctive photoluminescence (PL) enhancement phenomenon is observed, in which the PL intensity of the N-CQD film can be increased in both positive and negative electrochemical potential sweeps. The effect of positive potential on PL enhancement is greater (∼340% at +1.4 V), while that of negative potential is slightly weaker (∼10% at -1.4 V). To the best of our knowledge, no similar brightening process has been reported in all previous SEC studies on a variety of QDs, wherein the emission intensity can only exhibit enhancement under positive or negative potential at most. We propose that the above PL brightening is related to the weakened π-π stacking effect after electrochemical charge injection and nitrogen doping plays a crucial role in it. Finally, a low hysteresis reversible electrochemistry regulation of the PL spectrum can be achieved by increasing electrolyte fluidity with argon gas bubbling to reduce local charge aggregation.

Multifunctional nanomaterials and nanocomposites for sensing and monitoring of environmentally hazardous heavy metal contaminants

The applications of conventional sensors are limited by the long response time, high cost, large detection limit, low sensitivity, complicated usage and low selectivity. These sensors are nowadays replaced by Nanocomposite-based modalities and nanomaterials which are known for their high selectivity and physical and chemical properties. These nanosensors effectively detect heavy metal contaminants in the environment as the discharge of heavy metals into natural water as a result of human activity has become a global epidemic. Exposure to these toxic metals might induce many health-related complications, including kidney failure, brain injury, immune disorders, muscle paleness, cardiac damage, nervous system impairment and limb paralysis. Therefore, designing and developing novel sensing systems for the detection and recognition of these harmful metals in various environmental matrices, particularly water, is of extremely important. Emerging nanotechnological approaches in the past two decades have played a key role in overcoming environmentally-related problems. Nanomaterial-based fabrication of chemical nanosensors has widely been applied as a powerful analytical tool for sensing heavy metals. Portability, high sensitivity, on-site detection capability, better device performance and selectivity are all advantages of these nanosensors. The detection and selectivity have been improved using molecular recognition probes for selective binding on different nanostructures. This study aims to evaluate the sensing properties of various nanomaterials such as metal-organic frameworks, fluorescent materials, metal-based nanoparticles, carbon-based nanomaterials and quantum dots and graphene-based nanomaterials and quantum dots for heavy metal ions recognition. All these nano-architectures are frequently served as effective fluorescence probes to directly (or by modification with some large or small biomolecules) sense heavy metal ions for improved selectivity. However, efforts are still needed for the simultaneous designing of multiple metal ion-based detection systems, exclusively in colorimetric or optical fluorescence nanosensors for heavy metal cations.

Rice Husk-Derived Carbon Quantum Dots-Based Dual-Mode Nanoprobe for Selective and Sensitive Detection of Fe3+ and Fluoroquinolones

Herein, eco-friendly, water-soluble, and fluorescent carbon quantum dots (CQDs) with an average size of 8.3 nm were synthesized from rice husk (RH) using the hydrothermal method, and the CQDs were labeled as rice husk CQDs (RH-CQDs). The composition and surface functionalities were studied using X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. A study on the impact of pH and irradiation time on fluorescence affirmed the stability of RH-CQDs. The as-synthesized nanosensor has high selectivity and sensitivity for Fe³⁺ ions. Several photophysical studies were performed to investigate the interaction between RH-CQDs and Fe³⁺. Using the time-correlated single-photon technique, it is determined that the average lifetime value of RH-CQDs significantly decreases in the presence of Fe³⁺, which supports a dynamic quenching mechanism. The developed sensor exhibited excellent sensitivity with a detection limit in the nanomolar range (149 nM) with a wide linear range of 0-1300 nM for Fe³⁺ ions. The prepared nanosensor was also used to detect Fe³⁺ in a tablet supplement with high recoveries. Moreover, the RH-CQD nanoprobe was used to detect other analytes (fluoroquinolones) using the fluorescence enhancement technique. It showed high selectivity and sensitivity toward ofloxacin (OFX) and ciprofloxacin (CPX). The detection limits calculated were 150 nM and 127 nM with a linearity range of 50-1150 nM for OFX and CPX, respectively. The enhancement of the average lifetime value and quantum yield in the presence of OFX and CPX favors the increased fluorescence property of RH-CQDs through hydrogen bonding and charge transfer. In this work, the integration of two different mechanisms (fluorescence quenching and fluorescence enhancement) was followed to construct a single sensing platform for accurate quantification of dual-mode nanosensors for the detection of metal ions and fluoroquinolones by the excited-state electron transfer and hydrogen bonding mechanism, respectively. This strategy also stimulates the detection of more than one analyte.

Improving Minutiae Image of Latent Fingerprint Detection on Non-Porous Surface Materials under UV Light Using Sulfur Doped Carbon Quantum Dots from Magnolia Grandiflora Flower

In this study, carbon quantum dots (CQDs) from Magnolia Grandiflora flower as a carbon precursor were obtained using a hydrothermal method under the optimized conditions affected by various heating times (14, 16, 18, and 20 min) and various electric power inputs (900-1400 W). Then, hydrogen sulfide (H₂S) was added to dope the CQDs under the same manner. The aqueous solution of the S-CQDs were characterized by FTIR, XPS, EDX/SEM, and TEM, with nanoparticle size at around 4 nm. Then, the as-prepared S-CQDs were successfully applied with fine corn starch for detection of minutiae latent fingerprints on non-porous surface materials. It is demonstrated that the minutiae pattern is more clearly seen under commercial UV lamps with a bright blue fluorescence intensity. Therefore, this research has proved that the S-CQDs derived from plant material have a better potential as fluorescent probes for latent fingerprint detection.

Gram-Scale Synthesis of Graphitic Carbon Nitride Quantum Dots with Ultraviolet Photoluminescence for Fe3+ Ion Detection

A method for gram-scale synthesis of graphitic carbon nitride quantum dots (g-C₃N₄QDs) was developed. The weight of the g-C₃N₄QDs was up to 1.32 g in each run with a yield of 66 wt%, and the purity was 99.96 wt%. The results showed that g-C₃N₄QDs exhibit a stable and strong ultraviolet photoluminescence at a wavelength of 365 nm. More interestingly, the g-C₃N₄QDs can be used as a high-efficiency, sensitive, and selective fluorescent probe to detect Fe³⁺ with a detection limit of 0.259 μM.

Ultrafast Sulfur Mustard Simulant Gas Fluorescent Chemosensors Based on Triazole AIEE Material with High Selectivity and Sensitivity at Room Temperature

Herein, a novel blue aggregation-induced enhanced emission (AIEE) material 4-N-(naphthalen-l-yl)-3,5-bis(4-N-phenyl-1-naphthylamine)phenyl-4H-1,2,4-triazole (NDTAZ) is developed and used as a fluorescent chemosensor for sulfur mustard (SM) simulant 2-chloroethyl ethyl sulfide (2-CEES) vapor. The NDTAZ chemosensor is designed by introducing an electron-donating N-phenyl-1-naphthylamine group at 3 and 5 position of 4H-1,2,4-triazole (TAZ) to enhance the nucleophilicity of the TAZ group, and a naphthalene ring is connected to 4 position of the TAZ group to construct an AIEE molecule. The NDTAZ films show extraordinary stability and then are further used as reliable and portable fluorescent chemosensors. Upon exposure to 2-CEES vapor, the NDTAZ chemosensor exhibits an instantaneous fluorescence response (not more than 1 s). What should be noted is that this fluorescent chemosensor realizes the visualized detection of fluorescent color change from blue to green at "room temperature", which is rarely reported. The limit of detection is estimated to be 0.55 ppm, which is below the AEGL-1 (0.6 ppm for 1 min) safety ceiling level to SM exposure. Moreover, the NDTAZ chemosensor shows high selectivity toward 2-CEES vapor over closely related substances, including alkylating agents, aryl halide compounds, sulphur-containing compounds, and nerve agent mimics. More impressively, the NDTAZ chemosensor demonstrates good recyclability by water treatment. Also, the sensing mechanism is adequately proved by using multiple experimental methods and theoretical calculation. In addition, the NDTAZ-based facile filter paper-constructed test strips are fabricated for real-time and on-spot detection of leaked 2-CEES gas specifically. Therefore, this fluorescent chemosensor with excellent sensing performance greatly advances the practical detection of SM species at room temperature.

Metal ion sensing with graphene quantum dots: detection of harmful contaminants and biorelevant species

Graphene quantum dots (GQDs) are attractive materials for use as highly selective and sensitive chemical sensors, owing to their simple preparation and affordability. GQDs have been successfully deployed as sensors for toxic metal ions, which is a significant issue due to the ever-increasing environmental contamination from agricultural and industrial activities. Despite the success of GQDs in this area, the mechanisms which underpin GQD-metal ion specificity are rarely explored. This lack of information can result in difficulties when attempting to replicate published procedures and can limit the judicious design of new highly selective GQD sensors. Furthermore, there is a dearth of GQD examples which selectively detect biologically relevant alkali and alkaline earth metals. This review will present the current state of GQDs as metal ion sensors for harmful contaminants, highlighting and discussing the discrepancies that exist in the proposed mechanisms regarding metal ion selectivity. The emerging field of GQD sensors for biorelevant metal ion species will also be reviewed, with a perspective to the future of this highly versatile material.

Graphene quantum dots: A review on the effect of synthesis parameters and theranostic applications

The rising demand for early-stage diagnosis of diseases such as cancer, diabetes, neurodegenerative can be met with the development of materials offering high sensitivity and specificity. Graphene quantum dots (GQDs) have been investigated extensively for theranostic applications owing to their superior photostability and high aqueous dispersibility. These are attractive for a range of biomedical applications as their physicochemical and optoelectronic properties can be tuned precisely. However, many aspects of these properties remain to be explored. In the present review, we have discussed the effect of synthetic parameters upon their physicochemical characteristics relevant to bioimaging. We have highlighted the effect of particle properties upon sensing of biological molecules through 'turn-on' and 'turn-off' fluorescence and generation of electrochemical signals. After describing the effect of surface chemistry and solution pH on optical properties, an inclusive view on application of GQDs in drug delivery and radiation therapy has been given. Finally, a brief overview on their application in gene therapy has also been included.

A High-Luminescence Biomimetic Nanosensor Based on N, S-GQDs-Embedded Zinc-Based Metal-Organic Framework@Molecularly Imprinted Polymer for Sensitive Detection of Octopamine in Fermented Foods

In this study, a novel fluorescent molecularly imprinted nanosensor (N, S-GQDs@ZIF-8@MIP) based on the nitrogen and sulfur co-doped graphene quantum dots decorated zeolitic imidazolate framework-8 was constructed for the detection of octopamine (OA). Herein, ZIF-8 with a large surface area was introduced as a supporter of the sensing system, which effectively shortened the response time of the sensor. Meanwhile, high green luminescent N, S-GQDs and a maximum emission wavelength of 520 nm under 460 nm excitation and a 12.5% quantum yield were modified on the surface of ZIF-8 as a signal tag that can convert the interactions between the sensor and OA into detectable fluorescent signals. Finally, N, S-GQDs@ZIF-8@MIP was acquired through the surface molecular imprinting method. Due to the synergy of N, S-GQDs, ZIF-8, and MIP, the obtained sensor not only demonstrated higher selectivity and sensitivity than N, S-GQDs@ZIF-8@NIP, but also displayed faster fluorescence response than N, S-GQDs@MIP. Under optimal conditions, the developed sensor presented a favorable linear relationship in the range of 0.1-10 mg L-1 with a detection limit of 0.062 mg L-1. Additionally, the proposed N, S-GQDs@ZIF-8@MIP strategy was effectively applied to the detection of OA in fermented samples, and the obtained results had a satisfactory correlation with those of HPLC.

The Role of N and S Doping on Photoluminescent Characteristics of Carbon Dots from Palm Bunches for Fluorimetric Sensing of Fe3+ Ion

This work aims to enhance the value of palm empty fruit bunches (EFBs), an abundant residue from the palm oil industry, as a precursor for the synthesis of luminescent carbon dots (CDs). The mechanism of fIuorimetric sensing using carbon dots for either enhancing or quenching photoluminescence properties when binding with analytes is useful for the detection of ultra-low amounts of analytes. This study revealed that EFB-derived CDs via hydrothermal synthesis exceptionally exhibited luminescence properties. In addition, surface modification for specific binding to a target molecule substantially augmented their PL characteristics. Among the different nitrogen and sulfur (N and S) doping agents used, including urea (U), sulfate (S), p-phenylenediamine (P), and sodium thiosulfate (TS), the results showed that PTS-CDs from the co-doping of p-phenylenediamine and sodium thiosulfate exhibited the highest PL properties. From this study on the fluorimetric sensing of several metal ions, PTS-CDs could effectively detect Fe3+ with the highest selectivity by fluorescence quenching to 79.1% at a limit of detection (LOD) of 0.1 µmol L−1. The PL quenching of PTS-CDs was linearly correlated with the wide range of Fe3+ concentration, ranging from 5 to 400 µmol L−1 (R2 = 0.9933).

Detection of Fe3+ and Hg2+ Ions by Using High Fluorescent Carbon Dots Doped With S And N as Fluorescence Probes

In this paper, carbon quantum dots (N-S-CDs) containing sulfur and nitrogen were synthesized using citric acid and thiourea. The average particle size of N-S-CDs is 8 nm. The N-S-CDs surface contains various of functional groups, which has good water solubility. The fluorescence quantum yield of N-S-CDs is as high as 36.8%. N-S-CDs emits strong blue fluorescence in aqueous solution and has good photostability in neutral and alkaline NaCl solution. N-S-CDs has unique selectivity and high sensitivity to Fe³⁺ and Hg²⁺ ions, and the lowest detection limits are 1.4 μM and 0.16 μM, respectively. Under the interference of other metal ions, Fe³⁺ and Hg²⁺ ions can still effectively and stably quench the fluorescence of N-S-CDs. In addition, in the detection of actual samples, N-S-CDs can effectively detect Fe³⁺ and Hg²⁺ ions in tap water and lake water.

Green Synthesis of Nitrogen–Doped Carbon Dots from Fresh Tea Leaves for Selective Fe3+ Ions Detection and Cellular Imaging

In this research, we successfully developed a green, economical and effective one–step hydrothermal method for the synthesis of fluorescent nitrogen–doped carbon dots (N–CDs) by utilizing fresh tea leaves and urea as the carbon and nitrogen sources, respectively. The obtained N–CDs were characterized by TEM, XPS and FT–IR. We found that the N–CDs were near–spherical with an average size of about 2.32 nm, and contained abundant oxygen and nitrogen functional groups. The N–CDs exhibited bright blue fluorescence under ultraviolet illumination, with the maximum emission at 455 nm. Meanwhile, the as–prepared N–CDs could be selectively quenched by Fe3+ ions. The quenching of N–CDs is linearly correlated with the concentration of Fe3+ in the range of 0.1–400 μM with a low detection limit of 0.079 μM. Significantly, the N–CDs present excellent biocompatibility and high photostability. The results also depict that multicolor fluorescence is displayed under a fluorescence microscope and successfully applied for the detection of intracellular Fe3+. To sum up, the fluorescent N–CDs are expected to be a sensitive detection probe for Fe3+ in biological systems.

Preparation and Characterization of Photoluminescent Graphene Quantum Dots from Watermelon Rind Waste for the Detection of Ferric Ions and Cellular Bio-Imaging Applications

Graphene quantum dots (GQDs) were synthesized using watermelon rind waste as a photoluminescent (PL) agent for ferric ion (Fe3+) detection and in vitro cellular bio-imaging. A green and simple one-pot hydrothermal technique was employed to prepare the GQDs. Their crystalline structures corresponded to the lattice fringe of graphene, possessing amide, hydroxyl, and carboxyl functional groups. The GQDs exhibited a relatively high quantum yield of approximately 37%. Prominent blue emission under UV excitation and highly selective PL quenching for Fe3+ were observed. Furthermore, Fe3+ could be detected at concentrations as low as 0.28 μM (limit of detection), allowing for high sensitivity toward Fe3+ detection in tap and drinking water samples. In the bio-imaging experiment, the GQDs exhibited a low cytotoxicity for the HeLa cells, and they were clearly illuminated at an excitation wavelength of 405 nm. These results can serve as the basis for developing an environment-friendly, simple, and cost-effective approach of using food waste by converting them into photoluminescent nanomaterials for the detection of metal ions in field water samples and biological cellular studies.

Platinum Crosslinked Carbon Dot@TiO2-x p-n Junctions for Relapse-Free Sonodynamic Tumor Eradication via High-Yield ROS and GSH Depletion

Sonodynamic therapy as a promising noninvasive modality is being developed for tumor therapy, but there is a lack of next-generation sonosensitizers that can generate full ROS at high yields and simultaneously deplete elevated levels of glutathione (GSH) in tumor cells. Semiconductor p-n junctions are engineered as high-efficacy sonosensitizers for sonodynamic tumor eradication using pyridine N-doped carbon dots (N-CDs) as a p-type semiconductor and oxygen-deficient TiO_2-x nanosheets as a n-type semiconductor. The rate constants of ¹ O₂ and •OH generation by ultrasound-excited N-CD@TiO_2-x p-n junctions are 4.3 and 4.5 times higher than those of TiO₂ , respectively. A Z-scheme carrier migration mechanism in the p-n junction achieving the rapid spatial separation of the ultrasound-generated electron-hole pairs for enhanced full ROS production is proposed. GSH-cleavable, Pt-crosslinked, N-doped CD fluorescent probes to detect the presence of intracellular GSH are also constructed. A GSH-responsive, p-n junction platform (Pt/N-CD@TiO_2-x ) with integrated GSH detection, GSH depletion, and enhanced sonodynamic performance is then assembled. Malignant tumors are completely eradicated without relapse via intravenous administration of low-dose Pt/N-CD@TiO_2-x under ultrasound irradiation. This work substantiates the great potential of biocompatible, GSH-responsive p-n junctions as next-generation sonosensitizers via p-n junction-enhanced ROS generation and metal ion oxidation of intracellular GSH.

"Switch-Off-On" Detection of Fe3+ and F- Ions Based on Fluorescence Silicon Nanoparticles and Their Application to Food Samples

An approach to the detection of F⁻ ions in food samples was developed based on a “switch-off-on” fluorescence probe of silicon nanoparticles (SiNPs). The fluorescence of the synthetic SiNPs was gradually quenched in the presence of Fe³⁺ ion and slightly recovered with the addition of F⁻ ion owing to the formation of a stable and colorless ferric fluoride. The fluorescence recovery exhibited a good linear relationship (R² = 0.9992) as the concentration of F⁻ ion increased from 0 to 100 μmol·L⁻¹. The detection limit of the established method of F⁻ ion was 0.05 μmol·L⁻¹. The recovery experiments confirmed the accuracy and reliability of the proposed method. The ultraviolet–visible spectra, fluorescence decays, and zeta potentials evidenced the fluorescence quenching mechanism involving the electron transfer between the SiNPs and Fe³⁺ ion, while the fluorescence recovery resulted from the formation of ferric fluoride. Finally, SiNPs were successfully applied to detect F⁻ ions in tap water, Antarctic krill, and Antarctic krill powder.

Establishment of a steroid binding assay for membrane progesterone receptor alpha (PAQR7) by using graphene quantum dots (GQDs)

Currently, semiconductor nanoparticles known as quantum dots (QDs) have attracted interest in various application fields such as those requiring sensing properties, binding assays, and cellular imaging and are the very important in the acceleration of drug discovery due to their unique photophysical properties. Here, we applied graphene quantum dots (GQDs) for the binding assay of membrane progesterone receptor alpha (mPRα), one of the probable membrane receptors that have potential in drug discovery applications. By coupling the amino groups of mPRα with GQDs, we prepared fluorogenic GQD-conjugated mPRα (GQD-mPRα). When mixed with a progesterone-BSA-fluorescein isothiocyanate conjugate (P4-BSA-FITC) to check the ligand receptor binding activity of GQD-mPRα, fluorescence at 520 nm appeared. The fluorescence at 520 nm was reduced by the addition of free progesterone into the reaction mixture. GQD-coupled BSA (GQD-BSA) did not show a reduction in fluorescence at 520 nm. The results demonstrated the formation of a complex of GQD-mPRα and P4-BSA-FITC with ligand receptor binding. We established a ligand binding assay for membrane steroid receptors that is applicable for high-throughput assays.

Facile and green synthesis of carbon nanodots from environmental pollutants for cell imaging and Fe3+ detection

An economical and green approach has been provided to turn environmental pollutants into carbon nanodots for their potential applications in both bioimaging and Fe3+ detection.