Development of a highly sensitive enzyme-linked immunosorbent assay based on polyclonal antibodies for the detection of polychlorinated dibenzo-p-dioxins

Carbon Nanofiber-Ionic Liquid Nanocomposite Modified Aptasensors Developed for Electrochemical Investigation of Interaction of Aptamer/Aptamer-Antisense Pair with Activated Protein C

Selective and sensitive detection of human activated protein C (APC) was performed herein by using carbon nanofiber (CNF) and ionic liquid (IL) composite modified pencil graphite electrode (PGE) and electrochemical impedance spectroscopy (EIS) technique. A carbon nanomaterial-based electrochemical aptasensor was designed and implemented for the first time in this study for the solution-phase interaction of DNA-Apt with its cognate protein APC as well as APC inhibitor aptamer-antidote pair. The applicability of this assay developed for the determination of APC in fetal bovine serum (FBS) and its selectivity against different proteins (protein C, thrombin, bovine serum albumin) was also examined. CNF-IL modified aptasensor specific to APC provided the detection limit as 0.23 μg/mL (equal to 3.83 nM) in buffer medium and 0.11 μg/mL (equal to 1.83 nM) in FBS. The duration of the proposed assay from the point of electrode modification to the detection of APC was completed within only 55 min.

Enhanced detection of quantum dots by the magnetohydrodynamic effect for electrochemical biosensing

Magnetoelectrochemistry support for screen-printed electrodes.

Broad-Specificity Chemiluminescence Enzyme Immunoassay for (Fluoro)quinolones: Hapten Design and Molecular Modeling Study of Antibody Recognition

On the basis of the structural features of (fluoro)quinolones (FQs), pazufloxacin was first used as a generic immunizing hapten to raise a broad-specificity antibody. The obtained polyclonal antibody exhibited broad cross-reactivity ranging from 5.19% to 478.77% with 21 FQs. Furthermore, the antibody was able to recognize these FQs below their maximum residue limits (MRLs) in an indirect competitive chemiluminescence enzyme immunoassay (ic-CLEIA), with the limit of detection (LOD) ranging from 0.10 to 33.83 ng/mL. For simply pretreated milk samples with spiked FQs, the ic-CLEIA exhibited an excellent recovery with a range of 84.6-106.9% and an acceptable coefficient of variation below 15%, suggesting its suitability and reliability for the use of a promising tool to detect FQs. Meanwhile, comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) models, with statistically significant correlation coefficients (q(2)CoMFA = 0.559, r(2)CoMFA = 0.999; q(2)CoMSIA = 0.559, r(2)CoMSIA = 0.994), were established to investigate the antibody recognition mechanism. These two models revealed that in the antibody, the active cavity binding FQs' 7-position substituents worked together with another cavity (binding FQs' 1-position groups) to crucially endow the high cross-reactivity. This investigation will be significant for better exploring the recognition mechanism and for designing new haptens.

A highly selective electrochemical impedance spectroscopy-based aptasensor for sensitive detection of acetamiprid

A simple aptasensor for sensitive and selective detection of acetamiprid has been developed based on electrochemical impedance spectroscopy (EIS). To improve sensitivity of the aptasensor, gold nanoparticles (AuNPs) were electrodeposited on the bare gold electrode surface by cycle voltammetry (CV), which was employed as a platform for aptamer immobilization. With the addition of acetamiprid, the formation of acetamiprid-aptamer complex on the AuNPs-deposited electrode surface resulted in an increase of electron transfer resistance (Ret). The change of Ret strongly depends on acetamiprid concentration, which is applied for acetamiprid quantification. A wide linear range was obtained from 5 to 600nM with a low detection limit of 1nM. The control experiments performed by employing the pesticides that may coexist or have similar structure with acetamiprid demonstrate that the aptasensor has only specific recognition to acetamiprid, resulting in high selectivity of the aptasensor. The dissociation constant, Kd of 23.41nM for acetamiprid-aptamer complex has been determined from the differential capacitance (Cd) by assuming a Langmuir isotherm, which indicates strong interaction between acetamiprid and aptamer, further proving high selectivity of the aptasensor. Besides, the applicability of the developed aptasensor has been successfully evaluated by determining acetamiprid in the real samples, wastewater and tomatoes.

Investigation of antigen-antibody interactions of sulfonamides with a monoclonal antibody in a fluorescence polarization immunoassay using 3D-QSAR models

A three-dimensional quantitative structure-activity relationship (3D-QSAR) model of sulfonamide analogs binding a monoclonal antibody (MAb_SMR) produced against sulfamerazine was carried out by Distance Comparison (DISCOtech), comparative molecular field analysis (CoMFA), and comparative molecular similarity indices analysis (CoMSIA). The affinities of the MAb_SMR, expressed as Log₁₀IC₅₀, for 17 sulfonamide analogs were determined by competitive fluorescence polarization immunoassay (FPIA). The results demonstrated that the proposed pharmacophore model containing two hydrogen-bond acceptors, two hydrogen-bond donors and two hydrophobic centers characterized the structural features of the sulfonamides necessary for MAb_SMR binding. Removal of two outliers from the initial set of 17 sulfonamide analogs improved the predictability of the models. The 3D-QSAR models of 15 sulfonamides based on CoMFA and CoMSIA resulted in q²_cv values of 0.600 and 0.523, and r² values of 0.995 and 0.994, respectively, which indicates that both methods have significant predictive capability. Connolly surface analysis, which mainly focused on steric force fields, was performed to complement the results from CoMFA and CoMSIA. This novel study combining FPIA with pharmacophore modeling demonstrates that multidisciplinary research is useful for investigating antigen-antibody interactions and also may provide information required for the design of new haptens.

An immunoassay for dibutyl phthalate based on direct hapten linkage to the polystyrene surface of microtiter plates

BACKGROUND

Dibutyl phthalate (DBP) is predominantly used as a plasticizer inplastics to make them flexible. Extensive use of phthalates in both industrial processes and other consumer products has resulted in the ubiquitous presence of phthalates in the environment. In order to better determine the level of pollution in the environment and evaluate the potential adverse effects of exposure to DBP, immunoassay for DBP was developed.

METHODOLOGY/PRINCIPAL FINDINGS

A monoclonal antibody specific to DBP was produced from a stable hybridoma cell line generated by lymphocyte hybridoma technique. An indirect competitive enzyme-linked immunosorbent assay (icELISA) employing direct coating of hapten on polystyrene microtiter plates was established for the detection of DBP. Polystyrene surface was first oxidized by permanganate in dilute sulfuric acid to generate carboxyl groups. Then dibutyl 4-aminophthalate, which is an analogue of DBP, was covalently linked to the carboxyl groups of polystyrene surface with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC). Compared with conjugate coated format (IC(50)=106 ng/mL), the direct hapten coated format (IC(50)=14.6 ng/mL) improved assay sensitivity after careful optimization of assay conditions. The average recovery of DBP from spiked water sample was 104.4% and the average coefficient of variation was 9.95%. Good agreement of the results obtained by the hapten coated icELISA and gas chromatography-mass spectrometry further confirmed the reliability and accuracy of the icELISA for the detection of DBP in certain plastic and cosmetic samples.

CONCLUSIONS/SIGNIFICANCE

The stable and efficient hybridoma cell line obtained is an unlimited source of sensitive and specific antibody to DBP. The hapten coated format is proposed as generally applicable because the carboxyl groups on modified microtiter plate surface enables stable immobilization of aminated or hydroxylated hapten with EDC. The developed hapten coated icELISA can be used as a convenient quantitative tool for the sensitive and accurate monitoring DBP in water, plastic and cosmetic samples.

Production of monoclonal antibodies against fullerene C60 and development of a fullerene enzyme immunoassay

The aim of the present study was to produce monoclonal anti-fullerene C(60) antibodies and to develop the enzyme immunoassay for the detection in the first use of free fullerene C(60) both in solutions and in multicomponent biological probes. The immunization of mice with the conjugate of fullerene C(60) carboxylic derivative with thyroglobulin synthesized by carbodiimide activation led to the production of eight clones of anti-fullerene antibodies. The specificity of the antibody-fullerene binding was confirmed. Indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed for the determination of water-soluble protein-conjugated fullerene, the fullerene aminocaproic acid, fullerenol and for pristine fullerene in solution. To solubilize extremely hydrophobic free fullerene C(60) a specially selected water-organic mixture compatible with immunoassay was proposed. The detection limit of free fullerene C(60) in solution was 2 μg L(-1). Fullerene C(60) was also detected by ELISA in organ homogenates of rats intraperitoneally or intragastrically administered with fullerene. To reduce the influence of biomatrices on the assay results a technique was developed for the biological sample pretreatment by the extraction of C(60) from bioprobe by toluene followed by the evaporation of toluene and dissolution of the fullerene-containing extract in the selected water-organic media. The ELISA procedure in the first use allowed the detection of fullerene C(60) in different tissues.

A sensitive monoclonal antibody-based enzyme-linked immunosorbent assay for chlorpyrifos residue determination in Chinese agricultural samples

A monoclonal antibody-based competitive antibody-coated enzyme-linked immunosorbent assay (ELISA) was developed and optimized for determining chlorpyrifos residue in agricultural products. The IC(50) and IC(10) of this ELISA were 3.3 ng/mL and 0.1 ng/mL respectively. The average recoveries in six agricultural products were between 79.5% and 118.0%, with the intra-assay coefficient of variation being less than 8 %. The limit of detection for all tested products was 30 ng/g. To the best of our knowledge, this assay has the best specificity among all the published research on ELISAs for chlorpyrifos.

Assessment of dioxin-like soil contamination in Mexico by enzyme-linked immunosorbent assay

In this work, we describe the results of a preliminary soil assessment program for the detection of dioxins at different sites in Mexico performed by immunoassay. We studied five different sectors considered relevant sources of dioxins: Anaversa and Tekchem industrial areas where organochlorine pesticides were manufactured and released by accidental explosions, secondary smelters, brick kilns, and rural dwellings. In the context of the Agency for Toxic Substances and Disease Registry (ATSDR) guidelines, only the brick kilns sites can be considered as low-risk areas. The dioxin concentrations detected in the vicinity of the Anaversa and Tekchem chemical plants and secondary smelters exceed the screening level of 0.05 ppb set by the ATSDR, and therefore further site-specific studies are needed. The dioxin levels found in all soot samples from indigenous dwellings where wood is used for indoor cooking were above the evaluation level. Considering that the studied areas are representative examples of dioxin sources in less developed countries, our work demonstrates the useful application of dioxin immunoassays as a tool for dioxin screening for environmental assessment programs in developing countries.

Improvement of the long-term stability for dioxin toxicity evaluation method by enzyme-linked immunosorbent assay

A dioxin enzyme immunoassay (EIA) is one of the methods that may satisfy the requirements to reduce the cost and turn around time for the dioxin analysis. We developed a dioxin enzyme-linked immunosorbent assay (ELISA) to rapidly analyze for trace levels of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) in human milk. In this study, to aim to supply the stable assay quality, the development of long-term stable coated plates for the ELISA system was reported. To the conventional coated plate (wet plate), the dry plate ELISA indicated the stability to be able to store for 1.5 years at 11 degrees C. The IC(50) of this ELISA was 17 +/- 4 pg/well. The standard curve showed almost the same as that of the wet plate. A fairly good correlation between cross-reactivity of the ELISA and WHO-TEF was achieved for environmental matrices. This ELISA should be more practical for environmental sample monitoring.

High-throughput screening of dioxins in sediment and soil using selective pressurized liquid extraction with immunochemical detection

A high-throughput screening method using selective pressurized liquid extraction (SPLE) and enzyme-linked immunosorbent assay (ELISA) for monitoring dioxins in sediment and soil is described. SPLE conditions were developed by extracting sediment or soil together with alumina, 10% AgNO3 in silica, and sulfuric acid impregnated silica (acid silica) using dichloromethane (DCM) as the solvent at 100 degrees C and 2000 psi. Post-extraction cleanups were not required for ELISA. Two reference sediments (National Institute of Standards and Technology SRM 1944 and Wellington Laboratories WMS01) were analyzed by the SPLE-ELISA method. The ELISA utilized a polyclonal antibody and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) as the calibrant. Recoveries of ELISA-derived TCDD equivalents (EQ) relative to the expected gas chromatography/high resolution mass spectrometry (GC/HRMS) derived dioxin toxic equivalent (TEQ) values were 116+/-11% for SRM 1944 and 102+/-13% for WMS01. ELISA TCDD EQs were consistent with the dioxin TEQs as measured by GC/HRMS for 25 soil/sediment samples from seven different contaminated sites. The ELISA had an approximate method detection limit of 10 pg g(-1) with a precision of 2.6-29% based on the relative percentage difference (%RPD) for duplicate samples. Estimated sample throughput for the SPLE-ELISA was three times or more than that of the GC/HRMS method employing PLE with a multi-column cleanup.

Non-invasive matrices in human biomonitoring: a review

Humans and other living organisms are exposed to a variety of chemical pollutants that are released into the environment as a consequence of anthropogenic activities. Environmental pollutants are incorporated into the organism by different routes and can then be stored and distributed in different tissues, which leads to an internal concentration that can induce different alterations, adverse effects and/or diseases. Control measures should be taken to avoid these effects and human biomonitoring is a very useful tool that can contribute to this aim. Human biomonitoring uses different matrices to measure the target chemicals depending on the chemical, the amount of matrix necessary for the analysis and the detection limit (LOD) of the analytical technique. Blood is the ideal matrix for most chemicals due to its contact with the whole organism and its equilibrium with organs and tissues where chemicals are stored. However, it has an important disadvantage of being an invasive matrix. The development of new methodology and modern analytical techniques has allowed the use of other matrices that are less or non-invasive, such as saliva, urine, meconium, nails, hair, and semen or breast milk. The presence of a chemical in these matrices reflects an exposure, but correlations between levels in non-invasive matrices and blood must be established to ensure that these levels are related to the total body burden. The development of new biomarkers that are measurable in these matrices will improve non-invasive biomonitoring. This paper reviews studies that measure Cd, Pb, Hg, polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs), organochlorine pesticides and phthalates in non-invasive matrices, the most used techniques for measurements and what alternative techniques are available.

Optimization and validation of a California halibut environmental estrogen bioassay using a heterologous ELISA

Vitellogenin, the estrogen-inducible yolk protein precursor, serves as an indicator of exposure to estrogen mimicking environmental contaminants. An ELISA for the measurement of California halibut plasma vitellogenin was optimized and validated using a commercially-available antibody developed for another flatfish species, turbot. Attempts to enhance assay performance by addition of a biotinylated antibody, polyethylene glycol, and Tween-20, and altering the preincubation step are described. Inclusion of overnight preincubation was critical for low detection limits. Increasing the amount of Tween-20 to 0.05% in buffers was most effective in achieving accurate quantification of spiked plasma samples. At the IC50, the average recovery of spiked plasma samples was 104% and the interplate CV was 12%. The working range of the assay was 33-1000 ng/mL, while the detection limit in a plasma sample is 2.2 microg/mL. The performance of this assay compared very well to a homologous assay demonstrating that commercially-available antibodies can facilitate the development of bioassays for local environmentally-relevant species. The dose response relationship of halibut Vg to the model compounds 17beta-estradiol and pnonylphenol show that it is a suitable model for further studies of estrogen mimicking contaminants.

Intramuscular electroporation of a plasmid encoding human plasminogen kringle 5 induces growth inhibition of Lewis lung carcinoma in mice

Tumor growth and metastasis depend critically on blood vessel formation. Antiangiogenesis, therefore, represents a promising strategy for cancer therapy. The kringle 5 (K5) domain of human plasminogen is a potent angiogenesis inhibitor. To investigate whether intramuscular electroporation (EP) of K5 has antitumor activity in mouse tumor models, we constructed a plasmid encoding K5 (pVAX1-K5). Hela cells transfected with this plasmid produced and secreted K5 that inhibited the migration of human microvascular endothelial cells. Intramuscular EP treatment of pVAX1-K5 inhibited the growth of Lewis lung carcinoma and prolonged the survival time of tumor-bearing mice. Angiogenesis was obviously inhibited, and apoptosis was induced in tumor cells of mice that received intramuscular EP of pVAX1-K5. On the contrary, intramuscular injection of pVAX1-K5 without EP failed to show the same effects. The data indicate that intramuscular EP of plasmid DNA encoding the K5 domain is an effective strategy for the experimental treatment of cancer by expressing K5.

Substituted 3-phenylpropenoates and related analogs: electron ionization mass spectral fragmentation and density functional theory calculations

Analysis of ethyl 3-(2-chlorophenyl)propenoate by electron ionization mass spectrometry showed the distinct loss of an ortho chlorine. To characterize the structural requisites for the observed mass fragmentation, a series of 30 halogen-substituted 3-phenylpropenoate-related structures were examined. All ester-containing alkene derivatives exhibited loss of the distinctive chlorine from the 2-position of the phenyl ring. Analogous derivatives with the halogen (chlorine or bromine) in the para position did not evidence selective halogen loss. Results demonstrated that substituted 3-phenylpropenoates and their analogs fragment via the formation of a previously reported benzopyrylium intermediate. To understand the correlation between the intramolecular radical substitution and the abundance and selectivity of the chlorine (or other halogen) displacement, density functional theory calculations were performed to determine the charge on the principal cation involved in the chlorine loss (in the ortho, meta, and para positions), the charge for the neutral radical (noncation), the excess alpha-electron density on the relevant atom and the energy to form the cation from the neutral atom (ionization energy). Results showed that the selectivity and extent of halogen displacement correlated highly to the electrophilicity of the radical cation as well as the neutral radical. These data further support the proposed fragmentation mechanism involving intramolecular radical elimination.

An enzyme-linked immunosorbent assay for the determination of dioxins in contaminated sediment and soil samples

A 96-microwell enzyme-linked immunosorbent assay (ELISA) method was evaluated to determine PCDDs/PCDFs in sediment and soil samples from an EPA Superfund site. Samples were prepared and analyzed by both the ELISA and a gas chromatography/high resolution mass spectrometry (GC/HRMS) method. Comparable method precision, accuracy, and detection level (8 ng kg(-1)) were achieved by the ELISA method with respect to GC/HRMS. However, the extraction and cleanup method developed for the ELISA requires refinement for the soil type that yielded a waxy residue after sample processing. Four types of statistical analyses (Pearson correlation coefficient, paired t-test, nonparametric tests, and McNemar's test of association) were performed to determine whether the two methods produced statistically different results. The log-transformed ELISA-derived 2,3,7,8-tetrachlorodibenzo-p-dioxin values and log-transformed GC/HRMS-derived TEQ values were significantly correlated (r=0.79) at the 0.05 level. The median difference in values between ELISA and GC/HRMS was not significant at the 0.05 level. Low false negative and false positive rates (<10%) were observed for the ELISA when compared to the GC/HRMS at 1,000 ng TEQ kg(-1). The findings suggest that immunochemical technology could be a complementary monitoring tool for determining concentrations at the 1,000 ng TEQ kg(-1) action level for contaminated sediment and soil. The ELISA could also be used in an analytical triage approach to screen and rank samples prior to instrumental analysis.

Enzyme-linked immunosorbent assay based on a monoclonal antibody for the detection of the insecticide triazophos: assay optimization and application to environmental samples

A direct competitive enzyme-linked immunosorbent assay (ELISA) for triazophos was developed, which was based on the THHe monoclonal antibody (McAb) and a heterologous enzyme tracer (THBu-HRP). The influence of several physicochemical factors (temperature, time, pH, salt, detergent, and solvent) on the immunoassay was studied. For the standard curve, an I50 of 0.21 microg/L and a limit of detection (I20) of 0.02 microg/L was obtained in a high salt concentration buffer (0.05 M PBS, pH 6.0) with 0.05% BSA, which means an almost 3-fold improvement in the assay sensitivity in comparison with the nonoptimized conditions. The optimized ELISA has been used to quantify triazophos in water and soil samples spiked at different amounts. The excellent recoveries achieved confirmed the potential of the immunoassay for environmental monitoring of triazophos in waters and soils without purification steps.

Development of a monoclonal antibody-based broad-specificity ELISA for fluoroquinolone antibiotics in foods and molecular modeling studies of cross-reactive compounds

A competitive indirect enzyme-linked immunosorbent assay (ciELISA) using monoclonal antibodies (Mabs) having broad specificity for fluoroquinolone (FQ) antibiotics is described. Four FQs, ciprofloxacin (CIP), enrofloxacin (ENR), norfloxacin (NOR), and ofloxacin (OFL), were conjugated to bovine serum albumin for immunogens and to ovalbumin for coating antigens. A Mab C4A9H1 raised against the CIP hapten exhibited high cross-reactivity (35-100%) with 12 of 14 FQs and detected these FQs in a ciELISA below their maximum residue levels (MRLs) with good sensitivity at 50% binding inhibition (IC50). The quantitative structure-activity relationship (QSAR) between Mab C4A9H1 and various FQs by comparative molecular field analysis (CoMFA) showed a high predictive ability with a cross-validation q2 value of 0.866. Using a simple purification process and the broad-specificity ciELISA adapted for analysis of FQs in chicken muscle, chicken liver, honey, shrimp, and whole egg samples demonstrated recoveries of 60-93% for CIP, ENR, NOR, OFL, flumequine, and danofloxacin.

Rapid screening of dioxin-contaminated soil by accelerated solvent extraction/purification followed by immunochemical detection

Since soils at industrial sites might be heavily contaminated with polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), there is a need for large-scale soil pollution surveys and, thus, for cost-efficient, high-throughput dioxin analyses. However, trace analysis of dioxins in complex matrices requires exhaustive extraction, extensive cleanup, and very sensitive detection methods. Traditionally, this has involved the use of Soxhlet extraction and multistep column cleanup, followed by gas chromatography-high-resolution mass spectrometry (GC/HRMS), but bioanalytical techniques may allow much more rapid, cost-effective screening. The study presented here explores the possibility of replacing the conventional method with a novel approach based on simultaneous accelerated solvent extraction (ASE) and purification, followed by an enzyme-linked immunosorbent assay (ELISA). Both the traditional and the novel cleanup and detection approaches were applied to contaminated soil samples, and the results were compared. ELISA and GC/HRMS results for Soxhlet-extracted samples were linearly correlated, although the ELISA method slightly underestimated the dioxin levels. To avoid an unacceptable rate of false-negative results, the use of a safety factor is recommended. It was also noted that the relative abundance of the PCDDs/PCDFs, evaluated by principal component analysis, had an impact on the ELISA performance. To minimize this effect, the results may be corrected for differences between the ELISA cross-reactivities and the corresponding toxic equivalency factor values. Finally, the GC/HRMS and ELISA results obtained following the two sample preparation methods agreed well; and the ELISA and GC/HRMS results for ASE extracts were strongly correlated (correlation coefficient, 0.90). Hence, the ASE procedure combined with ELISA analysis appears to be an efficient approach for high-throughput screening of PCDD-/PCDF-contaminated soil samples.

Piezoelectric immunosensor for bisphenol A based on signal enhancing step with 2-methacrolyloxyethyl phosphorylcholine polymeric nanoparticle

An immunoassay in which BPA competed with a BPA-horseradish peroxidase conjugate for binding to anti-BPA antibodies, coupled to a piezoelectric (PZ) immunosensor, was able to detect 0.1 ng mL(-1) BPA. To enhance the sensitivity of the assay, we tested nanoparticles approximately 200 nm in diameter, coupled to anti-BPA antibodies, to increase the mass change on the surface of the immunosensor and thereby increase the frequency shift detected. This second step, using nanoparticles coated with anti-BPA antibodies, improved the sensitivity of the assay by approximately eight times at BPA concentrations below 10 ng mL(-1). Field emission-scanning electron microscopy (FE-SEM) showed that polymeric 2-methacrolyloxyethyl phosphorylcholine (MPC) nanoparticles coupled to antibodies remained monodisperse on the surface of the immunosensor and therefore produced stable signals in the immunosensors. Since the frequency shift detected in the assay mainly originated from the mass change on the surface of the PZ crystal, the colloidal stability of the antibody-conjugated particles used in the enhancement step played an extremely important role in achieving a stable and highly sensitive signal.

Synthesis of haptens for development of antibodies to alkylphenols and evaluation and optimization of a selected antibody for ELISA development

The development of an enzyme-linked immunosorbent assay (ELISA) based on polyclonal antibodies for a class of endocrine disrupting compounds, 4-nonylphenol, is described. The parent molecule was derivatized at the ortho position of the free phenolic hydroxyl group to obtain the hapten, NP1, and it was conjugated with keyhole limpet hemocyanin, which was used as an immunogen. Four antisera were generated and screened against three coating antigens. The most sensitive ELISA from the screening tests (antiserum NP03As, 1/1000, and coating antigen NP1-BSA, 1 microg/mL) was further optimized and characterized. The influence of various physicochemical factors (organic solvent, pH, ion strength) was investigated. Methanol as the additive organic solvent was found to be the best organic solvent for the ELISA, with optimal sensitivity observed at a concentration of 5%. The ELISA parameters were changed at more acidic or basic pH values, whereas higher ionic strengths strongly suppressed the I(50) value and the maximum absorbance. The most sensitive ELISA for 4-nonylphenol exhibited an I(50) value of 38.6 +/- 5.5 microg/L, with a dynamic range from 12 to 350 microg/L, and the lower limit of detection was 7.7 +/- 1.3 microg/L. The optimized ELISA displayed no significant cross-reaction against the parent compounds, nonylphenol ethoxylates, degradation products, carboxylates, and bisphenol A, except in 4-octylphenol.

Quartz crystal microbalance immunosensor for highly sensitive 2,3,7,8-tetrachlorodibenzo-p-dioxin detection in fly ash from municipal solid waste incinerators

A quartz crystal microbalance (QCM) immunosensor was developed for the detection of 2,3,7,8-tetrachlorodibenzo-p-dioxins (TCDD) in environmental pollutants. An anti-TCDD antibody was immobilized on the gold surface of the QCM via chemical coupling, and its immunologic activity was then maintained by treatment with an artificial stabilizing reagent such as poly(2-methacryloyloxyethyl phosphorylcholine-co-n-butyl methacrylate). A competitive immunoreaction with TCDD conjugated ovalbumin (TCDD-ovalbumin) was used to detect TCDD. A calibration curve was obtained through the competitive immunoreaction, and linearity was shown from 100 ng mL(-1) to 0.1 ng mL(-1). Also, the cross-reactivities of the anti-TCDD monoclonal antibody were thoroughly evaluated with several TCDD derivatives. The relationships between GC-MS, ELISA, and QCM were compared using fly ash samples from a municipal solid waste, which were prepared using an accelerated solvent extractor. For 23 samples, the experimental relationship between the TCDD concentration by QCM vs. the TCDD concentration by ELISA was y= 1.07x + 2.70, r= 0.99, and the TCDD concentration by QCM vs. the toxic equivalent quantity (TEQ) value by GC-MS was y= 2.46x - 14.98, r= 0.89.

Development of an enzyme-linked immunosorbent assay for the detection of the fungicide fenarimol

To develop an enzyme-linked immunosorbent assay for the fungicide fenarimol, two synthesized haptens, haptens-1 and -2, and the purchased 4,4'-DDA were conjugated to carrier proteins (BSA, KLH, and OVA). Polyclonal antibodies raised against hapten-1,2-KLH conjugates in rabbits and the coating antigens of hapten-1,2-BSA conjugates, hapten-2-OVA conjugate, and 4,4'-DDA-BSA conjugate were screened and selected for the homologous and/or heterologous ELISA formats. Two competitive indirect ELISAs were selected: assays I and II. The optimized ciELISAs of assays I and II showed average IC(50) values of fenarimol of 5.4 and 9.4 ng/mL, detection ranges of 1.1-25.9 and 1.1-82.7 ng/mL, and lowest detection limits of 0.3 and 0.3 ng/mL, respectively. The cross-reactivities with several structurally related compounds indicated the importance of the steric fitness in the antigen-antibody interaction. Recoveries of fenarimol from apple and pear samples spiked with the analyte by assay I were in the range of 93-113% by simple extraction, concentration, and dilution. This assay could be a convenient and supplemental analytical tool for monitoring fenarimol residues in environmental and agricultural samples.

Development of an ELISA for the detection of the residues of the fungicide iprovalicarb

A competitive indirect enzyme-linked immunosorbent assay was developed for the fungicide iprovalicarb, using a polyclonal antibody produced against a hapten conjugated through the carboxyl group on the benzene ring to keyhole limpet hemocyanin. Under an optimized condition using a heterologous format, an IC(50) of 3.51 ng/mL and the lowest detection limit of 0.065 ng/mL were obtained. When the isopropoxy group was removed from the iprovalicarb structure for the synthesis of a hapten, the resulting hapten was not successful as an immunogen, indicating that the isopropyl moiety was an important epitope, as evidenced by the cross-reactivities of some structurally related compounds. When applied to the real crop and water samples, the recoveries were in the range of 80.52-144.70% (n = 4) and 72.11-100.43% (n = 4), respectively. Accordingly, this ELISA can be used as a useful method for monitoring iprovalicarb residues in crop and water samples.

Enzyme-Linked Immunosorbent Assay for Monitoring Toxic Dioxin Congeners in Milk Based on a Newly Generated Monoclonal Anti-Dioxin Antibody

To develop an enzyme-linked immunosorbent assay (ELISA) for monitoring the toxicity due to polychlorinated dibenzo-p-dioxins and dibenzofurans contaminated in human breast milk, we have generated novel monoclonal antibodies using some haptenic derivatives linked to bovine serum albumin via the C-1 or C-2 position on the dioxin skeleton. BALB/c or A/J mice were repeatedly immunized with the immunogen, and spleen cells were fused with P3/NS1/1-Ag4-1 myeloma cells. After five fusion experiments, a hybridoma clone was established that secretes an antibody D9-36 group specifically recognizing the major toxic congeners, 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD), 1,2,3,7,8-pentachlorodibenzo-p-dioxin, and 2,3,4,7,8-pentachlorodibenzofran. An ELISA is developed on the basis of the competitive and labeled-antigen format. The toxic congeners extracted from butter or milk specimens by a novel extraction cartridge and a peroxidase-labeled dioxin analogue were sequentially reacted with a fixed amount of D9-36 in the presence of Triton X-100. The bound fraction was captured on a microtiter plate, immobilizing a second antibody, and the enzyme activity was colorimetrically determined. This ELISA afforded a practical sensitivity (measurable range, 1-100 pg/assay; detection limit, 1.0 pg/assay as 2,3,7,8-TCDD equivalent). The assay values for milk and butter samples were in reasonable accordance with the sum of the toxicity-equivalent quantity of each congener, which had been determined by a high-resolution gas chromatography/high-resolution mass spectrometry method.

Development of Direct ELISA for the Determination of 4-Nonylphenol and Octylphenol

Development of direct competitive enzyme-linked immunoadsorbent assays (ELISAs) based on polyclonal and monoclonal antibodies raised against 4-n-alkylphenol hapten mimics is described. A strong tendency to recognize 4-nonylphenol (NP) and 4-octylphenol (OP) as a total analyte amount was indicated by cross-reactivity pattern established for two polyclonal antibodies. These antibodies were employed for development of class-selective assays exhibiting IC(50) values around 40 microg.L(-1) for technical 4-NP. Specificity of the monoclonal antibody 4H6 and additional two polyclonal antibodies allowed sensitive detection of linear long-chain forms of 4-n-alkylphenols (4-n-AP). The assays incorporating these antibodies offer a potential for detecting the minor fraction of NP/OP isomer spectrum having IC(50) = 11.5 microg.L(-1) for 4-n-NP. No cross-reactivity interference was indicated for linear alkylbenzene sulfonates and phenolic compounds. To interpret the measured data in terms of analytical equivalents, a reliable relationship between the assay responses and AP content of contaminated samples should be verified and validated.

Mechanical force analysis of peptide interactions using atomic force microscopy

Some peptides have previously been reported to bind low molecular weight chemicals. One such peptide with the amino acid sequence His-Ala-Ser-Tyr-Ser was selectively screened from a phage library and bound to a cationic porphyrin, 5,10,15,20-tetrakis(N-methylpyridinium-4-yl)-21H,23H-porphine (TMpyP), with a binding constant of 10(5) M(-1) (J. Kawakami, T. Kitano, and N. Sugimoto, Chemical Communications, 1999, pp. 1765-1766). The proposed binding was due to pi-electron stacking from two aromatic amino acids of histidine and tyrosine. In this study, the weak interactions between TMpyP and the peptide were further investigated by force curve analysis using atomic force microscopy (AFM). The mechanical force required to unbind the peptide-porphyrin complex was measured by vertical movement of the AFM tip. Peptide self-assembled monolayers were formed on both a gold-coated mica substrate and a gold-coated AFM tip. The TMpyPs could bind between the two peptide layers when the peptide-immobilized AFM tip contacted the peptide-immobilized substrate in solution containing TMpyP. In the retracting process a force that ruptured the interaction between TMpyPs and peptides was observed. The unbinding force values correlated to the concentration of TMpyP. A detection limit of 100 ng/mL porphyrin was obtained for the force measurement, and was similar to surface plasmon resonance sensor detection limits. Furthermore, we calculated the product of the observed force and the length of the molecular elongation to determine the work required to unbind the complexes. The obtained values of unbinding work were in a reasonable range compared to the binding energy of porphyrin-peptide.

Comparison of dioxin and furan TEQ determination in contaminated soil using chemical, micro-EROD, and immunoassay analysis

High resolution mass spectrometry gas chromatography (GC/MS) is the standard method for dioxin and furan analysis in environmental matrices. Considered as very accurate, this method is however time consuming and expensive. Methods based on biological interactions have the necessary sensitivity but began only recently to be investigated in the context of environmental applications. We have compared dioxin and furan toxicity levels (expressed as toxic equivalent quantities (TEQs)) in soil samples by three analytical approaches: the micro-ethoxyresorufin-o-deethylase (EROD) bioassay (a receptor-based method), an immunoassay (antibody-based method) and GC/MS analysis (used as a reference) using a shortened extraction-purification method. Both biological methods were sensitive to interferences from compounds co-extracted from samples. Most samples were underestimated by the immunoassay and, at a greater extent, overestimated by the EROD bioassay. The average accuracy of TEQ estimation (86 +/- 45% of values established by GC/MS) and the absence of false-negatives showed by the immunoassay suggest the usefulness of this method for semi-quantitative, preliminary characterization of potentially contaminated sites.

Biomarkers and bioassays for detecting dioxin-like compounds in the marine environment

The presence of toxic chemical contaminants in some marine organisms, including those consumed by humans, is well known. Monitoring the levels of such contaminants and their geographic and temporal variability is important for assessing and maintaining the safety of seafood and the health of the marine environment. Chemical analyses are sensitive and specific, but can be expensive and provide little information on the actual or potential biological activity of the contaminants. Biologically-based assays can be used to indicate the presence and potential effects of contaminants in marine animals, and therefore, have potential for routine monitoring of the marine environment. Halogenated aromatic hydrocarbons (HAHs) such as chlorinated dioxins, dibenzofurans, and biphenyls comprise a major group of marine contaminants. The most toxic HAHs (dioxin-like compounds) act through an intracellular receptor protein, the aryl hydrocarbon receptor, which is present in humans and many, but not all, marine animals. A toxic equivalency approach based on an understanding of this mechanism provides an integrated measure of the biological potency or activity of HAH mixtures. Biomarkers measured in marine animals indicate their exposure to these chemicals in vivo. Similarly, in vitro biomarker responses measured in cell culture bioassays can be used to assess the concentration of 'dioxin equivalents' in extracts of environmental matrices. Here, I have reviewed the types and relative sensitivities of mechanistically-based, in vitro bioassays for dioxin-like compounds, including assays of receptor-binding, DNA-binding and transcriptional activation of native (CYP1A) or reporter (luciferase) genes. Examples of their use in environmental monitoring are provided. Cell culture bioassays are rapid and inexpensive, and thus have great potential for routine monitoring of marine resources, including seafood. Several such assays exist, or are being developed, for a variety of marine contaminants in addition to the dioxin-like chemicals. A battery of cell culture bioassays might be used to rapidly and sensitively screen seafood for the presence of contaminants of concern, including dioxin-like compounds as well as other contaminants such as natural toxins, hormonally active agents, and heavy metals. Such a battery of mechanism-based, in vitro bioassays could be incorporated into monitoring efforts under recently adopted hazard analysis and critical control point (HACCP) programs.

Development of an immunoassay for the residues of the herbicide bensulfuron-methyl

To develop a competitive indirect enzyme-linked immunosorbent assay based on polyclonal antibodies for the detection of the sulfonylurea herbicide bensulfuron-methyl, seven structurally related haptens were synthesized. Four of them mimicking the target analyte were conjugated to keyhole limpet hemocyanin by the N-hydroxysuccinimide activated ester method to use as immunogens, and all of them were conjugated to bovine serum albumin to use as plate-coating antigens. Polyclonal antibodies raised in rabbits and the coating antigens were screened and selected for the assay in simple homologous and heterologous ELISA formats. Three sensitive heterologous ELISAs were selected and optimized, showing the average IC(50) values of bensulfuron-methyl as low as 0.17, 0.09, and 0.09 ng/mL, the detection ranges of 0.04-0.60, 0.01-0.60, and 0.04-0.25 ng/mL, and the lowest detection limits of 0.03, 0.002, and 0.03 ng/mL, respectively. The cross-reactivities of other sulfonylurea herbicides and metabolites of bensulfuron-methyl to the antibodies were less than 15% in the two assays. Recoveries from the analyte-fortified water samples in assay I were in the range of 81-125% by simple dilution. The correlation between the ELISA and HPLC was 0.999 (n = 15) with a slope of 1.37 in the analysis of groundwater samples fortified with bensulfuron-methyl. The results obtained strongly indicate that the ELISA can be a highly sensitive and convenient tool for detecting bensulfuron-methyl residues in agricultural and environmental samples.

Development of dioxin toxicity evaluation method in human milk by enzyme-linked immunosorbent assay--assay validation for human milk

In this study, the development of a toxicity evaluation method for dioxins in human milk by enzyme-linked immunosorbent assay (ELISA) was reported. A total of 17 human milk samples were tested by ELISA and by gas chromatography/mass spectrometry (GC/MS) to assess whether the ELISA performed on samples obtained from primiparas could be considered as reliable enough for identifying a dioxins contamination in human milk. The concept of toxicity equivalent quantity (TEQ) screening was validated by comparing TEQ values for a set of human milk samples to the ELISA responses predicted for those samples. A fairly good correlation (r = 0.920) between immunoassay and GC/MS was achieved for human milk. This ELISA should be useful for biological samples monitoring.

Bioanalytical screening methods for dioxins and dioxin-like compounds a review of bioassay/biomarker technology

Determination of environmental pollutants utilizing biodetectors such as bioassays, biomarkers, enzyme immunoassays (EIAs), or other bioanalytical tools is a continuously growing area. The present literature review describes the principles and advantages/limitations of several bioanalytical detection methods (BDMs) for the screening and diagnosis of dioxin and dioxin-like compounds. This study characterizes briefly the family of dioxin and dioxin-like compounds, discusses potential Ah receptor (AhR) ligands and cytochrome P-450 (CYP) 1A1-enzyme-inducing compounds. 'Milestones' in the development of BDMs are summarized and explained in detail for a number of bioanalytical tools that can be used to detect these classes of dioxin-like persistent bioaccumulative toxicants (PBTs). The design of a screening profile with a battery of bioassays/biomarkers coupled with the chemical analysis is evaluated. The relative potencies (REPs) to 2,3,7,8-TCDD for dioxin-like compounds are reviewed for various BDMs and the differences are noted.

Fluorescence immunoassay system based on the use of a pH-sensitive phase-separating polymer

Poly(N-isopropylacrylamide-co-methacrylic acid) [P(NIPAAm-co-MAA)], a linear water-soluble pH-sensitive phase-separating polymer, was synthesized and used as a novel separation carrier for the reactants in immunoassay. This polymer precipitates out of water below a critical pH 5.8 at 37 degrees C and redissolves when the pH of solution is above 6.2. The characteristic of this polymer makes it possible to carry out the immunochemical steps of an immunoassay in a true solution and then to quickly separate the resulting product from the reaction mixture. The above approach was applied to determination of alpha-fetoprotein with the competitive immunoassay format. Compared with traditional ELISA using the same reactants, the proposed method was much faster (the assay time decreased from 100-120 to 30 min) and showed similar sensitivity, i.e., 0.04 ng/mL. In addition, a sandwich immunoassay method for the determination of hepatitis B surface antigen was also studied, and the results showed that the pH phase-separating immunoassay could be carried out through a sandwich or a competitive method. This general technique may also be used for a wide variety of separation processes in addition to immunoassay, in which a specific component is to be isolated for analysis, recovery, or disposal.

Optimisation and use of tandem-in-time mass spectrometry in comparison with immunoassay and HRGC/HRMS for PCDD/F screening

Rapid screening of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans using quadrupole ion storage tandem-in-time mass spectrometry (QISTMS) conjointly with polyclonal antibody immunoassay has been considered. The optimisation of the fragmentation of the parent ion in the trap has been completed. The analysis of fly ashes from a municipal waste incinerator contaminated at different levels has then been realised. Results obtained using QISTMS, HRMS and immunoassay are compared.

Development of an ELISA for the detection of the residues of the insecticide imidacloprid in agricultural and environmental samples

A competitive enzyme-linked immunosorbent assay (ELISA) for the chloronicotinyl insecticide imidacloprid was developed using a polyclonal antibody produced against a hapten conjugated through the imidazolidine to keyhole limpet hemocyanin. In the standard curve of imidacloprid, an IC(50) of 17.3 ng/mL was obtained using a competitive heterologous system at pH 10. Very low cross-reactivity was found for some structurally related compounds including the insecticide thiacloprid. The high cross-reactivity with a metabolite containing the carbonyl group in the imidazolidine moiety suggests the involvement of its polarity and stereochemical fitness in forming the antibody--antigen complex. The effects of various assay conditions, including organic solvents, detergent content, salt concentration, and pH on the sensitivity were evaluated. High-performance liquid chromatography was run for comparison to validate the ELISA with fortified water samples, the correlation being 0.997-0.998 (n = 15) with a slope of 1.10--1.38. The ELISA turned out to be a convenient tool for monitoring imidacloprid residues in agricultural and environmental samples.