Precipitation of an insoluble product on enzyme monolayer electrodes for biosensor applications: characterization by Faradaic impedance spectroscopy, cyclic voltammetry, and microgravimetric quartz crystal microbalance analyses

Nanoprecipitation-Enhanced Sensitivity in Enzymatic Nanofluidic Biosensors

Single nanochannels show unique transport properties due to nanoconfinement. It has been demonstrated that at submillimolar concentrations of divalent cations, a nanoprecipitation reaction can occur in nanochannels. Although several reports have shown, described, and modeled the nanoprecipitation process, no further advantages have been taken from this phenomenon. Here, we show that the nanoprecipitation reaction can be incorporated into enzyme-modified nanochannels to enhance the performance of small-molecule biosensors via in situ amplification reactions. Contrary to the working principle of previous enzymatic nanofluidic biosensors, the nanofluidic biosensor described in this work operates on the basis of concerted functions: pH-shifting enzymatic activity and nanoprecipitation. We show that the simple addition of Ca2+ and Mg2+ ions in the working analyte solution containing urea can lower the detection limit from the nanometer to the subnanometer regime and modulate the dynamic linear range. This approach enables the implementation of more sensitive real-time nanofluidic detection methods without increasing the complexity of the nanofluidic platform or the sensing approach. We envision that the integration of concerted functions in nanofluidic architectures will play a key role in expanding the use of these nanoscale devices for analytical purposes.

The Latest Sensor Detection Methods for per- and Polyfluoroalkyl Substances

Per- and polyfluoroalkyl substances (PFASs) have emerged as a prominent environmental pollutant in recent years, primarily due to their tendency to accumulate and magnify in both the environment and living organisms. The entry of PFASs into the environment can have detrimental effects on human health. Hence, it is crucial to actively monitor and detect the presence of PFASs. The current standard detection method of PFAS is the combination of chromatography and mass spectrometry. However, this requires expensive instruments, extra sample pretreatment steps, complicated operation and long analysis time. As a result, new methods that do not rely on chromatography and mass spectrometry have been developed and applied. These alternative methods mainly include optical and electrochemical sensor methods, which offer great potential in terms of real-time field detection, instrument miniaturization, shorter analysis time, and reduced detection cost. This review provides a summary of recent advancements in PFAS detection sensors. We categorize and explain the principles and mechanisms of these sensors, and compare their limits of detection and sensitivity. Finally, we discuss the future challenges and improvements needed for PFAS sensors, such as field application, commercialization, and other related issues.

Ultrafast one-minute electronic detection of SARS-CoV-2 infection by 3CLpro enzymatic activity in untreated saliva samples

Since its onset in December 2019, severe acute respiratory syndrome coronavirus 2, SARS-CoV-2, has caused over 6.5 million deaths worldwide as of October 2022. Attempts to curb viral transmission rely heavily on reliable testing to detect infections since a large number of transmissions are carried through asymptomatic individuals. Many available detection methods fall short in terms of reliability or point-of-care applicability. Here, we report an electrochemical approach targeting a viral proteolytic enzyme, 3CLpro, as a marker of active infection. We detect proteolytic activity directly from untreated saliva within one minute of sample incubation using a reduction-oxidation pH indicator. Importantly, clinical tests of saliva samples from 50 subjects show accurate detection of SARS-CoV-2, with high sensitivity and specificity, validated by PCR testing. These, coupled with our platform's ultrafast detection, simplicity, low cost and point-of-care compatibility, make it a promising method for the real-world SARS-CoV-2 mass-screening.

Bifunctional Magnetic Fe3O4@Cu2O@TiO2 Nanosphere-Mediated Dual-Mode Assay of PTP1B Activity Based on Photocurrent Polarity Switching and Nanozyme-Engineered Biocatalytic Precipitation Strategies

Dysregulation of protein phosphatases is associated with the progression of various human diseases and cancers. Herein, a photoelectrochemical (PEC)-quartz crystal microbalance (QCM) dual-mode sensing platform was developed for protein tyrosine phosphatase 1B (PTP1B) activity assay based on bifunctional magnetic Fe₃O₄@Cu₂O@TiO₂ nanosphere-mediated PEC photocurrent polarity switching and QCM signal amplification strategies. The PTP1B-specific phosphopeptide (P-peptide) with a cysteine end was designed and immobilized onto the QCM Au chip via the Au-S bond. Subsequently, the Fe₃O₄@Cu₂O@TiO₂ nanosphere was connected to the P-peptide via the specific interaction between the phosphate group on the P-peptide and TiO₂. After incubation with PTP1B, the dephosphorylation of the P-peptide occurred, causing some Fe₃O₄@Cu₂O@TiO₂ nanospheres to be released from the chip surface. The released magnetic Fe₃O₄@Cu₂O@TiO₂ nanospheres (labeled as R-Fe₃O₄@Cu₂O@TiO₂) were quickly separated via magnetic separation technology and attached to the Bi₂S₃-decorated magnetic indium-tin oxide (Bi₂S₃/MITO) electrode by magnetic force, inducing the switch of the photocurrent polarity of the electrode from anodic current (the Bi₂S₃/MITO electrode) to cathodic current (the R-Fe₃O₄@Cu₂O@TiO₂/Bi₂S₃/MITO electrode). Also, the nondephosphorylated P-peptide linked Fe₃O₄@Cu₂O@TiO₂ nanospheres as nanozymes with horseradish peroxidase activity to catalyze the formation of precipitation on the surface of the Au chip, leading to a frequency change of the QCM. Thus, the proposed PEC-QCM dual-mode sensing platform achieved accurate and reliable assay of PTP1B activity because of the different mechanisms and independent signal transductions. In addition, this dual-mode sensing platform can be easily extended for other protein phosphatase activity analysis and shows great potential in the early diagnosis of the protein phosphatase-related diseases and the protein phosphatase-targeted drug discovery.

Advanced wearable biosensors for the detection of body fluids and exhaled breath by graphene

Given the huge economic burden caused by chronic and acute diseases on human beings, it is an urgent requirement of a cost-effective diagnosis and monitoring process to treat and cure the disease in their preliminary stage to avoid severe complications. Wearable biosensors have been developed by using numerous materials for non-invasive, wireless, and consistent human health monitoring. Graphene, a 2D nanomaterial, has received considerable attention for the development of wearable biosensors due to its outstanding physical, chemical, and structural properties. Moreover, the extremely flexible, foldable, and biocompatible nature of graphene provide a wide scope for developing wearable biosensor devices. Therefore, graphene and its derivatives could be trending materials to fabricate wearable biosensor devices for remote human health management in the near future. Various biofluids and exhaled breath contain many relevant biomarkers which can be exploited by wearable biosensors non-invasively to identify diseases. In this article, we have discussed various methodologies and strategies for synthesizing and pattering graphene. Furthermore, general sensing mechanism of biosensors, and graphene-based biosensing devices for tear, sweat, interstitial fluid (ISF), saliva, and exhaled breath have also been explored and discussed thoroughly. Finally, current challenges and future prospective of graphene-based wearable biosensors have been evaluated with conclusion. Graphene is a promising 2D material for the development of wearable sensors. Various biofluids (sweat, tears, saliva and ISF) and exhaled breath contains many relevant biomarkers which facilitate in identify diseases. Biosensor is made up of biological recognition element such as enzyme, antibody, nucleic acid, hormone, organelle, or complete cell and physical (transducer, amplifier), provide fast response without causing organ harm.

Nanowire-based sensor electronics for chemical and biological applications

Detection and recognition of chemical and biological species via sensor electronics are important not only for various sensing applications but also for fundamental scientific understanding. In the past two decades, sensor devices using one-dimensional (1D) nanowires have emerged as promising and powerful platforms for electrical detection of chemical species and biologically relevant molecules due to their superior sensing performance, long-term stability, and ultra-low power consumption. This paper presents a comprehensive overview of the recent progress and achievements in 1D nanowire synthesis, working principles of nanowire-based sensors, and the applications of nanowire-based sensor electronics in chemical and biological analytes detection and recognition. In addition, some critical issues that hinder the practical applications of 1D nanowire-based sensor electronics, including device reproducibility and selectivity, stability, and power consumption, will be highlighted. Finally, challenges, perspectives, and opportunities for developing advanced and innovative nanowire-based sensor electronics in chemical and biological applications are featured.

An electrochemical method for determination of amaranth in drinks using functionalized graphene oxide/chitosan/ionic liquid nanocomposite supported nanoporous gold

An electrochemical sensor was fabricated by modifying nanoporous gold (NPG)-coated glassy carbon electrode (NPG/GCE) with functionalized graphene oxide /chitosan/ionic liquid nanocomposites (fGO/CS/IL). The introduction of ionic liquid (IL) and chitosan (CS) induced higher dispersibility of functionalized graphene oxide (fGO), and was beneficial for the combination of fGO/CS/IL with NPG/GCE. As a result of the synergistic effect of NPG and fGO/CS/IL, the resulted functionalized graphene oxide/chitosan/ionic liquid nanocomposites/nanoporous gold /glassy carbon electrode (fGO/CS/IL/NPG/GCE) showed the highest redox peak current response signal of Amaranth (E123) due to ultrahigh surface area, electronic conductivity as well as the improvement of the surface structure. Under optimized conditions, the enhanced peak currents represented excellent analytical performance for detection of Amaranth in the concentration range from 8.0 to 1200.0 nM. Meanwhile, the fGO/CS/IL/NPG/GCE presented satisfactory sensitivity and selectivity, excellent reproducibility, and long-time stability. For practical applications, the fGO/CS/IL/NPG/GCE was validated for the determination of Amaranth in three types of drinks with satisfactory results.

Simple, rapidly electroassembled thiolated PEG-based sensor interfaces enable rapid interrogation of antibody titer and glycosylation

Process conditions established during the development and manufacture of recombinant protein therapeutics dramatically impacts their quality and clinical efficacy. Technologies that enable rapid assessment of product quality are critically important. Here, we describe the development of sensor interfaces that directly connect to electronics and enable near real-time assessment of antibody titer and N-linked galactosylation. We make use of a spatially resolved electroassembled thiolated polyethylene glycol hydrogel that enables electroactivated disulfide linkages. For titer assessment, we constructed a cysteinylated protein G that can be linked to the thiolated hydrogel allowing for robust capture and assessment of antibody concentration. For detecting galactosylation, the hydrogel is linked with thiolated sugars and their corresponding lectins, which enables antibody capture based on glycan pattern. Importantly, we demonstrate linear assessment of total antibody concentration over an industrially relevant range and the selective capture and quantification of antibodies with terminal β-galactose glycans. We also show that the interfaces can be reused after surface regeneration using a low pH buffer. Our functionalized interfaces offer advantages in their simplicity, rapid assembly, connectivity to electronics, and reusability. As they assemble directly onto electrodes that also serve as I/O registers, we envision incorporation into diagnostic platforms including those in manufacturing settings.

Electrochemical impedance spectroscopy for quantization of matrix Metalloproteinase-14 based on peptides inhibiting its homodimerization and heterodimerization

We reported here two novel electrochemical impedance spectroscopy biosensors were developed for the first time for highly sensitive quantification of matrix metalloproteinase-14 (MMP-14) based on binding interaction between hemopexin-like domain (PEX) of MMP-14 (PEX-14) and its inhibitory peptides. Specific inhibitory peptides (IVSC or ISC) inhibiting homodimerization or heterodimerization of MMP-14 was first self assembled on the surface of gold electrode and blocked with 6-mercapto-1-hexanol on a gold electrode surface used as IVSC or ISC modified biosensor, respectively. IVSC modified biosensor can be used for detection of MMP-14 by using the direct IVSC-MMP-14 interaction inhibiting MMP-14 homodimerization as well as ISC modified biosensor for indirect detection of MMP-14 via PEX-14 mediated peptide-MMP-14 binding. The electron transfer resistance (R_et) of biosensor was monitored to measure MMP-14 using Fe(CN)₆^3-/4- as probe. The increase of the R_et of the biosensors are linear with the concentration of MMP-14 in the range from 1 μg L^-1 to 10 μg L^-1 with detection limit of 0.19 μg L^-1 for IVSC modified biosensor and 0.1 ng L^-1 to 50 ng L^-1 with detection limit of 7 ng L^-1 for ISC modified biosensor. This work demonstrates that probing the interaction between peptide inhibitor and PEX of MMPs represents a novel approach to assess MMPs-mediated cancer dissemination.

Recent Advances in Electric-Double-Layer Transistors for Bio-Chemical Sensing Applications

As promising biochemical sensors, ion-sensitive field-effect transistors (ISFETs) are used widely in the growing field of biochemical sensing applications. Recently, a new type of field-effect transistor gated by ionic electrolytes has attracted intense attention due to the extremely strong electric-double-layer (EDL) gating effect. In such devices, the carrier density of the semiconductor channel can be effectively modulated by an ion-induced EDL capacitance at the semiconductor/electrolyte interface. With advantages of large specific capacitance, low operating voltage and sensitive interfacial properties, various EDL-based transistor (EDLT) devices have been developed for ultrasensitive portable sensing applications. In this article, we will review the recent progress of EDLT-based biochemical sensors. Starting with a brief introduction of the concepts of EDL capacitance and EDLT, we describe the material compositions and the working principle of EDLT devices. Moreover, the biochemical sensing performances of several important EDLTs are discussed in detail, including organic-based EDLTs, oxide-based EDLTs, nanomaterial-based EDLTs and neuromorphic EDLTs. Finally, the main challenges and development prospects of EDLT-based biochemical sensors are listed.

Improving Photovoltaic and Enzymatic Sensing Performance by Coupling a Core-Shell Au Nanorod@TiO2 Heterostructure with the Bioinspired l-DOPA Polymer

The photoelectrochemistry (PEC) performance of TiO₂ is somewhat limited by its wide band gap and low quantum efficiency, and the innovation of its composite materials provides a promising solution for an improved performance. Herein, a composite of a Au nanorod@TiO₂ core-shell nanostructure (AuNR@TiO₂) and a melanin-like l-DOPA polymer (PD) is designed and prepared, where the outer layer PD tethered by TiO₂-hydroxyl complexation and the AuNR core can intensify the long-wavelength light harvesting, and the AuNR@TiO₂ core-shell structure can strengthen the hot-electron transfer to TiO₂. The photocurrent of PD/AuNR@TiO₂ is 8.4-fold improved versus that of commercial TiO₂, and the maximum incident photon-to-electron conversion efficiency reaches 65% in the UV-visible-near-infrared region. In addition, the novel PD/AuNR@TiO₂ photocatalyst possesses the advantages of good biocompatibility and stability, which can act as a versatile PEC biosensing platform for providing a biocompatible environment and improving detection sensitivity. Herein, a PEC enzymatic biosensor of glucose is developed on the basis of the immobilization of dual enzyme [glucose oxidase (GOx) and horseradish peroxidase (HRP)] in PD and the signaling strategy of biocatalytic precipitation. In phosphate buffer containing glucose and 4-chloro-1-naphthol, the HRP-catalyzed oxidation of 4-chloro-1-naphthol by GOx-generated H₂O₂ can form a precipitate on the electrode, by which the decrement of photocurrent intensity is proportional to the common logarithm of glucose concentration. The linear detection range is from 0.05 μM to 10.0 mM glucose, with a limit of detection of 0.01 μM (S/N = 3). Glucose in some human serum samples is analyzed with satisfactory results.

Coupling Self-Assembly Mechanisms to Fabricate Molecularly and Electrically Responsive Films

Biomacromolecules often possess information to self-assemble through low energy competing interactions which can make self-assembly responsive to environmental cues and can also confer dynamic properties. Here, we coupled self-assembling systems to create biofunctional multilayer films that can be cued to disassemble through either molecular or electrical signals. To create functional multilayers, we: (i) electrodeposited the pH-responsive self-assembling aminopolysaccharide chitosan, (ii) allowed the lectin Concanavalin A (ConA) to bind to the chitosan-coated electrode (presumably through electrostatic interactions), (iii) performed layer-by-layer self-assembly by sequential contacting with glycogen and ConA, and (iv) conferred biological (i.e., enzymatic) function by assembling glycoprotein (i.e., enzymes) to the ConA-terminated multilayer. Because the ConA tetramer dissociates at low pH, this multilayer can be triggered to disassemble by acidification. We demonstrate two approaches to induce acidification: (i) glucose oxidase can induce multilayer disassembly in response to molecular cues, and (ii) anodic reactions can induce multilayer disassembly in response to electrical cues.

Mimicking the endothelial glycocalyx through the supramolecular presentation of hyaluronan on patterned surfaces

Self-assembled monolayers of hyaluronan (HA)-binding peptide allow immobilization of HA for studying the function of the endothelial glycocalyx.

Electrochemical Biosensing of Algal Toxins in Water: The Current State-of-the-Art

Due to increasing stringency of water legislation and extreme consequences that failure to detect some contaminants in water can involve, there has been a strong interest in developing electrochemical biosensors for algal toxin detection during the past decade, evidenced by literature increasing from 2 journal papers pre-2009 to 24 between 2009 and 2018. In this context, this review has summarized recent progress of successful algal toxin detection in water using electrochemical biosensing techniques. Satisfactory detection recoveries using real environmental water samples and good sensor repeatability and reproducibility have been achieved, along with some excellent limit-of-detection (LOD) reported. Recent electrochemical biosensor literature in algal toxin detection is compared and discussed to cover three major design components: (1) biorecognition elements, (2) electrochemical read-out techniques, and (3) sensor electrodes and signal amplification strategy. The recent development of electrochemical biosensors has provided one more step further toward quick in situ detection of algal toxins in the contamination point of the water source. In the end, we have also critically reviewed the current challenges and research opportunities regarding electrochemical biosensors for algal toxin detection that need to be addressed before they attain commercial viability.

Electrochemical Detection of Plasma Immunoglobulin as a Biomarker for Alzheimer's Disease

The clinical diagnosis and treatment of Alzheimer’s disease (AD) represent a challenge to clinicians due to the variability of clinical symptomatology as well as the unavailability of reliable diagnostic tests. In this study, the development of a novel electrochemical assay and its potential to detect peripheral blood biomarkers to diagnose AD using plasma immunoglobulins is investigated. The immunosensor employs a gold electrode as the immobilizing substrate, albumin depleted plasma immunoglobulin as the biomarker, and polyclonal rabbit Anti-human immunoglobulin (against IgA, IgG, IgM) as the receptor for plasma conjugation. The assay showed good response, sensitivity and reproducibility in differentiating plasma immunoglobulin from AD and control subjects down to 10⁻⁹ dilutions of plasma immunoglobulin representing plasma content concentrations in the pg mL⁻¹ range. The newly developed assay is highly sensitive, less time consuming, easy to handle, can be easily modified to detect other dementia-related biomarkers in blood samples, and can be easily integrated into portable devices.

Enzyme Deposition by Polydimethylsiloxane Stamping for Biosensor Fabrication

High-performance biosensors were fabricated by efficiently transferring enzyme onto Pt electrode surfaces using a polydimethylsiloxane (PDMS) stamp. Polypyrrole and Nafion were coated first on the electrode surface to act as permselective films for exclusion of both anionic and cationic electrooxidizable interfering compounds. A chitosan film then was electrochemically deposited to serve as an adhesive layer for enzyme immobilization. Glucose oxidase (GOx) was selected as a model enzyme for construction of a glucose biosensor, and a mixture of GOx and bovine serum albumin was stamped onto the chitosan-coated surface and subsequently crosslinked using glutaraldehyde vapor. For the optimized fabrication process, the biosensor exhibited excellent performance characteristics including a linear range up to 2 mM with sensitivity of 29.4 ± 1.3 μA mM^-1 cm^-2 and detection limit of 4.3 ± 1.7 μM (S/N = 3) as well as a rapid response time of ~2 s. In comparison to those previously described, this glucose biosensor exhibits an excellent combination of high sensitivity, low detection limit, rapid response time, and good selectivity. Thus, these results support the use of PDMS stamping as an effective enzyme deposition method for electroenzymatic biosensor fabrication, which may prove especially useful for the deposition of enzyme at selected sites on microelectrode array microprobes of the kind used for neuroscience research in vivo.

A sensitive signal-off electrogenerated chemiluminescence biosensing method for the discrimination of DNA hydroxymethylation based on glycosylation modification and signal quenching from ferroceneboronic acid

In this study, a new and sensitive signal-off electrogenerated chemiluminescence (ECL) biosensing method for the quantification of 5-hydroxymethylcytosine in DNA (5-hmC-DNA) was developed. The method achieved simple and sensitive detection of 5-hmC-DNA based on the glycosylation of 5-hmC, combining both the amplification function of gold nanoparticles (AuNPs) and the high quenching efficiency of the tris(2, 2'-ripyridine) dichlororuthenium(II) (Ru(bpy)₃²⁺)-ferrocene (Fc) system. First, the electrode modified with a mixture of Nafion and AuNPs was utilized as the platform for electrostatically adsorbing Ru(bpy)₃²⁺(an ECL-emitting species) and assembling 5-hmC-DNA. The 5-hmC-DNA was glycosylated by T4 β-glucosyltransferase, yielding β-glucosyl-5-hydroxymethyl-cytosine in DNA (5-ghmC-DNA). Finally, quencher-FcBA was further covalently bound to 5-ghmC-DNA through formation of boronate ester covalent bonds between boronic acid and cis-diols of 5-ghmC, resulting in a decrease in ECL intensity. The results indicated that the decreased ECL intensity was directly linear to the concentration of 5-hmC-DNA in the range from 1.0×10^-8 to 5.0×10^-11M with a low detection limit of 1.63×10^-11M. In addition, this ECL method was demonstrated to be useful for the quantification of 5-hmC in clinical serum samples. Moreover, the method allowed good discrimination among cytosine (5-C), 5-methylcytosine (5-mC), and 5-hmC in DNA.

Discrimination between 5-Hydroxymethylcytosine and 5-Methylcytosine in DNA via Selective Electrogenerated Chemiluminescence (ECL) Labeling

DNA methylation is used to dynamically reprogram cells in the course of early embryonic development in mammals. 5-Hydroxymethylcytosine in DNA (5-hmC-DNA) plays essential roles in the demethylation processes. 5-Methylcytosine in DNA (5-mC-DNA) is oxidized to 5-hmC-DNA by 10-11 translocation proteins, which are relatively high abundance in embryonic stem cells and neurons. A new method was developed herein to quantify 5-hmC-DNA based on selective electrogenerated chemiluminescence (ECL) labeling with the specific oxidation of 5-hmC to 5-fC by KRuO₄. A thiolated capture probe (ssDNA, 35-mer) for the target DNA containing 5-hmC was self-assembled on a gold surface. The 5-hmC in the target DNA was selectively transformed to 5-fC via oxidation by KRuO₄ and then subsequently labeled with N-(4-aminobutyl)-N-ethylisoluminol (ABEI). The ABEI-labeled target DNA was hybridized with the capture probe on the electrode, resulting in a strong ECL emission. An extremely low detection limit of 1.4 × 10^-13 M was achieved for the detection of 5-hmC-DNA. In addition, this ECL method was useful for the quantification of 5-hmC in serum samples. This work demonstrates that selective 5-hmC oxidation in combination with an inherently sensitive ECL method is a promising tactic for 5-hmC biosensing.

A Highly Sensitive Immunosorbent Assay Based on Biotinylated Graphene Oxide and the Quartz Crystal Microbalance

A high-sensitivity flow-based immunoassay is reported based on a gold-coated quartz crystal microbalance (QCM) chip functionalized directly in the QCM without requiring covalent conjugation steps. Specifically, the irreversible adsorption of a biotinylated graphene oxide-avidin complex followed by loading of a biotinylated capture antibody is applied to avoid more complex conventional surface modification chemistries and enable chip functionalization and sensing all within the QCM instrument. The resulting immunosensors exhibit significantly lower nonspecific protein adsorption and stronger signal for antigen sensing relative to simple avidin-coated sensors. Reproducible quantification of rabbit IgG concentrations ranging from 0.1 ng/mL to 10 μg/mL (6 orders of magnitude) can be achieved depending on the approach used to quantify the binding with simple mass changes used to detect higher concentrations and a horseradish peroxidase-linked detection antibody that converts its substrate to a measurable precipitate used to detect very low analyte concentrations. Sensor fabrication and assay performance take ∼5 h in total, which is on par with or faster than other techniques. Quantitative sensing is possible in the presence of complex protein mixtures, such as human plasma. Given the broad availability of biotinylated capture antibodies, this method offers both an easy and flexible platform for the quantitative sensing of a variety of biomolecule targets.

Label-free electrochemical detection of malaria-infected red blood cells

The precise and rapid diagnosis of malaria is key to prevent indiscriminate use of antimalarial drugs and help in timely treatment and management of the disease.

Detection of trace heavy metal ions in water by nanostructured porous Si biosensors

Specific and sensitive detection and quantification of heavy metals in real water using label-free optical biosensors.

Nanoscale controlled architecture for development of ultrasensitive lectin biosensors applicable in glycomics

In this Minireview the most advanced patterning protocols and transducing schemes for development of ultrasensitive label-free and label-based lectin biosensors for glycoprofiling of disease markers and some cancerous cells are described. Performance of such lectin biosensors with interfacial properties tuned at a nanoscale are critically compared to the most sensitive immunoassay format of analysis and challenges ahead in the field are discussed. Moreover, key elements for future advances of such devices on the way to enhance robustness and practical applicability of lectin biosensors are revealed.

Thermo- and sulfate-controllable bioelectrocatalysis of glucose based on horseradish peroxidase and glucose oxidase embedded in poly(N,N-diethylacrylamide) hydrogel films

Dual-responsive poly(N,N-diethylacrylamide) (PDEA) hydrogel films with entrapped horseradish peroxidase (HRP) and glucose oxidase (GOD) were successfully prepared on electrode surface with a simple one-step polymerization procedure under mild conditions, designated as PDEA-HRP-GOD. Cyclic voltammetric (CV) response of electroactive probe K3Fe(CN)6 at the film electrodes displayed reversible thermo- and sulfate-responsive switching behavior. For example, at 25 °C, the K3Fe(CN)6 demonstrated a well-defined CV peak pair with large peak currents for the films, showing the on state, while at 40 °C, the CV response was greatly suppressed and the system was at the off state. The influence of temperature and Na2SO4 concentration on the switching behavior of the film system was not independent or separated, but was synergetic. The responsive mechanism of the system was ascribed to the structure change of PDEA component in the films with temperature and sulfate concentration. This switching property of the PDEA-HRP-GOD films could be further used to realize dual-responsive catalytic oxidation of glucose sequentially by HRP and GOD entrapped in the films with Fe(CN)6 (3-) as the mediator through changing the surrounding temperature and Na2SO4 concentration. This system may establish a foundation for fabricating a new type of multi-switchable electrochemical biosensors based on bienzyme electrocatalysis.

Combination of hematin and PEDOT via 1-pyrenebutanoic acid: a new platform for direct electrochemistry of hematin and biosensing applications

In this work, we prepare a novel platform based on poly(3,4-ethylenedioxythiophene) (PEDOT) and 1-pyrenebutanoic acid (PBA). PEDOT is a conductive material of heteroatom doping, which can connect with PBA through π–π stacking.

Electrochemical detection of nitrite based on glassy carbon electrode modified with gold–polyaniline–graphene nanocomposites

This study reports possible interferences for the detection of NO₂⁻ on a Au–G–PANI/GCE.