Zirconium Metal-Organic Cages: Synthesis and Applications

Zirconium metal-organic cages for iodine adsorption: Effect of substituted groups and pore structures

Zirconium metal-organic cages (MOCs) have emerged as potential adsorbents for radioactive iodine absorption, one of key fission products of concern in nuclear fuel cycles. Herein a series of substituted groups functionalized Zr-MOCs were employed to investigate the influence of substituted group on iodine adsorption, in which ZrT-1-(NH2)2 showed the highest improvement on both iodine vapor and solution-based absorption. Thereafter, five longer linkers functionalized with amino groups were chosen to construct five isoreticular MOCs for iodine absorption. Among them, ZrT-2-3,3'-(NH2)2 and ZrT-3-2,2''-(NH2)2 exhibited comparable iodine vapor absorption capacity compared with ZrT-1-(NH2)2. Impressively, iodine vapor adsorption capacities (2.62 g/g and 2.50 g/g) of ZrT-1-(NH2)2 and ZrT-3-2,2''-(NH2)2, represent the second highest among all the MOCs. These five isoreticular MOCs displayed higher iodine uptake capacities via solution-based process than ZrT-1-(NH2)2. The iodine/cyclohexane uptake capacities of ZrT-2-3-NH2 and ZrT-2-3,3'-(NH2)2 and ZrT-3-2,2''-(NH2)2 are the highest among all the MOCs. Raman and XPS demonstrate the strong charge transfer from the amino-substituted linkers to absorbed iodine. Synchrotron X-ray single-crystal diffraction provides the possible iodine species distribution in the cage, clarifying the host-guest interactions between the trapped iodine and MOCs. This work may motivate the rational design of MOCs with optimized structures to enhance the adsorption properties.

Reticular Chemistry within Crystalline Porous Gas Adsorbents and Membranes

ConspectusAdsorptive and membrane separations are recognized as highly energy-efficient technologies, critically dependent on the properties of adsorbent and membrane materials. Crystalline porous materials (CPMs), such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), metal-organic cages (MOCs), and hydrogen-bonded organic frameworks (HOFs), have emerged as exceptional candidates for high-performance adsorbents and membranes due to their intrinsic structural tunability. Their orderly pore structure, high porosity, and large surface facilitate gas storage and separation processes. Furthermore, modifying the inner surface, controlling the pore size, and regulating the framework flexibility can significantly enhance CPMs' adsorption capacity and separation selectivity. Therefore, the precise structure regulation of CPMs is the key to optimizing gas separation and purification.Reticular chemistry is the use of strong chemical bonds to connect discrete molecular structures (molecules or molecular clusters) to create extended structures, such as CPMs. It allows precise atomic-level control and offers a method for regulating the structures of CPMs, enabling tailored pore environments that enhance selectivity for target separations. This approach is crucial to designing effective gas separation materials. For example, by functionalizing organic ligands, regulating metal ions, and modifying secondary building units, the pore size, porosity, and functionality of CPMs can be finely controlled while keeping the framework topology unchanged, thereby optimizing the gas separation performance.In this Account, we present an overview of our group's research efforts on optimizing gas separation by fine-tuning CPM adsorbents and membranes. Using reticular chemistry, we have developed strategies such as multiple cooperative regulation, adaptive pore control, pore environment engineering, preprocessed monomer interfacial polymerization, and precursor solution processing to create highly selective CPM adsorbents and membranes. Additionally, we elucidate the underlying mechanism of multiple hydrogen bonding and dipole-dipole interactions between CPMs and hydrocarbon molecules. By precise structural regulation, we further optimize the gas separation performance and broaden CPMs' applications. Finally, we discuss the challenges and future directions for CPM adsorbents and membranes, including material design, synthesis, stability, performance, and the structure-activity relationship. We also propose a membrane-adsorptive separation coupling technology as a potential solution for achieving high-purity gas separation. By utilizing CPM-based adsorbents and membranes, we aim to establish an energy-intensive and environmentally friendly pathway for the separation of low-carbon hydrocarbons, hydrogen, and natural gas, providing a sustainable alternative to conventional high-energy gas separation processes.

Metal-Organic Cages Assembled From {Ni6} Nodes for Selective CO2 Reduction

Constructing cluster-based nodes and using them as catalytic sites can bring new structure and function for metal-organic cages (MOCs). However, successful examples are very limited. Herein, we found that a 2-mercapto-5-methyl-1,3,4-thiadiazole (Hmmt) based {Ni6} subunit is robust in building such MOCs. The {Ni6} node is based on the central Ni4 cubane and two wing Ni(II) ions with virtually three or four connected features. When various carboxylate ligands are incorporated the triangular prismatic [Ni18(Hmmt)3(mmt)12(BPDC)6(CH3O)12(H2O)6(DMF)6] (4/MOC-18N, H2BPDC = biphenyl-4,4'-dicarboxylic acid), tetrahedral-like [Ni24(Hmmt)4(mmt)16(BTC)4(CH3O)16Cl4(H2O)4(DMF)5(CH3OH)3] (5/MOC-24N, H3BTC = 1,3,5-benzenetricarboxylic acid) and the octahedral [Ni36(Hmmt)6(mmt)24(BTC)8(CH3O)24(H2O)12(DMF)12] (6/MOC-36N) can be isolated. Interestingly, MOCs 4-6 can uptake CO2 in solid states. Moreover, they can effectively and selectively convert CO2 into CO under visible light owing to the active wing Ni(II) ions, which are ancillarily coordinated with solvent molecules. All of them show turnover frequencies larger than 3500 µmol·g-1·h-1 and selectivity higher than 90%. This is a much higher performance compared to the usage of cage space for CO2 reduction in previously reported MOCs and competitive to most Ni(II)-based simple coordination complexes. As such, this work may open a new paradigm for designing node based catalytic function for MOCs.

Fluorinated metal-organic frameworks: hydrophobic nanospaces with high fluorine density and proton conductivity

The current work revealed the relationship between the fluorine density of organic-based porous materials and water dynamics (proton conduction) in the hydrophobic nanospace. In detail, by focusing on UiO-66 with structural durability at high temperature/humidity based on strong Zr-O bonds, we prepared UiO-66-CF3 and UiO-66-(CF3)2 with different fluorine densities. The activation energies for proton conduction of UiO-66-CF3 (0.91 eV) and UiO-66-(CF3)2 (1.38 eV) were significantly larger than that in UiO-66 (0.47 eV) depending on their fluorine density. Introducing fluorine into organic-based porous materials allowed the hydrophobic nanospace to interact with protons, yielding a larger energy for proton conduction (activation energy). The fluorine density and activation energy were proportional. We clarified that the activation energy of proton conduction increased proportionally with the fluorine density in the nanospace. This indicated the possibility that the state of proton/water in the nanospace could be freely controlled by the fluorine density.

Supramolecular Eu(III)4L4 Tetrahedra-Based Films for Luminescence Sensing of Volatile Amines with Sub-ppt-Level Detection Limit

Metal-organic cages are a class of discrete supramolecular architectures endowed with a well-defined cavity and diverse functionalities, offering a broad range of applications that, however, are predominantly confined to liquid phases. In this study, we present the self-assembly of supramolecular Eu(III)4L4 tetrahedra, constructed from triarylborane-cored tritopic tridentate ligands, which were fabricated into spin-coated films with bright emission, smooth surfaces, and uniform thickness. These films demonstrated ultralow detection limits for a series of volatile amines, reaching the sub-ppt level. This work serves as a compelling example of the preparation and application of metal-organic-cage-based films, paving the way for broader application scenarios.

Role of Solvent Decomposition in the Synthesis and Composition of Porous Zirconium-Based Coordination Cages

Porous zirconium-based coordination cages are promising materials for applications in gas adsorption, catalysis, and molecular separation due to their tunability and stability. However, their synthesis is often complicated by the formation of competing phases, including insoluble or poorly soluble byproducts that impact purity and composition. Moreover, product composition and solubility can vary widely due to factors such as humidity, seasonal fluctuations, and lab-to-lab variations, highlighting the inherent lack of robustness in these syntheses. In this work, we investigate how solvothermal synthesis conditions, particularly temperature and solvent decomposition, influence the formation and composition of these cages. We show that elevated temperatures accelerate solvent breakdown, leading to the incorporation of formate and acetate byproducts that alter the final cage structures and contribute to the formation of insoluble zirconium-based, amorphous solids. By systematically varying the reaction conditions, we optimized the composition of the isolated cage products, achieving improved phase purity. By optimizing synthetic parameters, we achieve control over cage formation and particle morphology while mitigating the effects of solvent decomposition. Our findings provide insights into the balance between ligand coordination and solvent effects, enabling the development of strategies to enhance the purity, porosity, and functionality of these molecular cages.

Transformation of Zirconium Metal-Organic Cages to Metal-Organic Gels

Zirconium metal-organic cages (Zr-MOCs) that assemble from zirconocence-based clusters and carboxylate-based ligands have been widely used as building blocks for constructing various MOC-based materials with diverse applications because of their high stability and solubilities. However, in this work, we found that the structures of a series of Zr-MOCs are quite flexible when heated at 60 °C in an N,N'-dimethylformamide solution, in which they are completely disassembled into fragments and reassembled into amorphous metal-organic gels (MOGs). The transformation mechanism was investigated via proton nuclear magnetic resonance, electrospray ionization mass spectrometry, infrared spectroscopy, X-ray photoelectron spectroscopy, and other techniques, which revealed that cyclopentadiene (CP) breaks out of the [Zr3CP3(μ2-OH)3(μ3-O)] cluster and remains in solution, whereas the trinuclear [Zr3(μ2-OH)3(μ3-O)] cluster dimerizes into a hexanuclear [Zr6(μ2-OH)6(μ3-O)2] cluster and forms amorphous MOGs with terephthalic acid-based ligands. The reported Zr-MOCs based on terephthalic acid-based ligands with different substituent groups, longer biphenyl dicarboxylic acids, and trimesic acids all undergo such MOC-to-MOG transformations, indicating good versatility for this transformation. In addition, the posttreatment of amorphous MOGs with an appropriate amount of acetic acid could regulate the crystallinity of the MOGs, thus giving rise to MOGs containing nano-UiO-66-type MOF crystals and xerogels with improved porosity.

Chiral Metal Self-Assemblies of Zirconium-Tetrahedra and Their Second Harmonic Generation Activity

The chirality of metal-organic cages holds enormous potential for novel applications in diverse fields, while it is relatively rare to employ such asymmetric units for the construction of noncentrosymmetric materials. Herein, by self-assembling the 4,4',4''-nitrilotribenzoic acid (H3NBA) with bis(cyclopentadienyl)-zirconium dichloride (Cp2ZrCl2, Cp=η5-C5H5) in different solvent conditions, we have obtained three hierarchical packing modes of metallo-tetrahedra with distinct spatial symmetry groups (designated as Zr-α, Zr-β, and Zr-γ). Among them, Zr-α employs a simple cubic arrangement and is a common centrosymmetric superstructure, which consists of a pair of equimolar metallo-tetrahedra enantiomers in its unit cell. While Zr-β results in conglomerates with spontaneous resolution without using any resolving agents, giving rise to two enantiopure entities separately (Zr-β-P, Zr-β-M). More importantly, Zr-γ breaks the inversion center of symmetry and crystallizes into a racemic yet non-centrosymmetric superstructure with face-centered cubic packing mode. Based on the non-centrosymmetric nature, the hierarchical superstructure Zr-γ displayed good second harmonic generation activities. This work presents a successful instance wherein the reaction solvent induces the modulation of intermolecular packing mode to afford non-centrosymmetric solid materials, which can greatly promote the development of noncentrosymmetric solid (NCS) materials.

Improving the Cellular Internalization of Zr(IV) Nanocages by Tuning Hydrophilicity and Lipophilicity

Nanoscale molecular materials have emerged as a new class of compounds at the nanometer scale with well-defined chemical structures, remarkable uniformity and high reproducibility. Among these materials, zirconium-based metal-organic cages (MOCs) have attracted significant attention due to their exceptional stability and applications in catalysis, recognition and separation and so on. However, their poor water solubility impedes their biomedical applications. In this study, decorating the ligand with Ru(II) complexes can not only improve the water solubility but also endow bright red fluorescence with large Stokes shift (180 nm). Notably, butyl-modification of the cyclopentadiene rings can significantly enhance the cell uptake (100 folds) of nanocages via actin- and dynamin-mediated endocytosis. The unique advantages and easy modifiability of these nanocages make them highly promising candidates for diverse biological applications.

Hypercrosslinked Metal-Organic Polyhedra Electrolyte with High Transference Number and Fast Conduction of Li Ions

Solid-state electrolytes (SSEs) with high Li-ion transference numbers and fast ionic conductivity are urgently needed for technological innovations in lithium-metal batteries. To promote the dissociation of ion pairs and overcome the mechanical brittleness and interface defects caused by traditional fillers in polymeric electrolytes, we designed and fabricated a cationic hypercrosslinking metal-organic polyhedra (HCMOPs) polymer as SSE. Benefiting a three-component synergistic effect: cationic MOPs, branched polyethyleneimine macromonomer and polyelectrolyte units, the Li-HCMOP electrolyte possesses a high Li-ion conductivity, a high Li-ion transference number and a low activation energy. The LiFePO4/Li battery exhibits high capacity with superior rate performance and cycling stability. Moreover, soluble MOPs serve as high crosslinking nodes to provide excellent mechanical strength for electrolytes and good compatibility with polymers. This work highlights an effective idea of high-performance MOP-based solid-state electrolytes applied in LMBs.

Charge-transfer complexation of coordination cages for enhanced photochromism and photocatalysis

Intensified host-guest electronic interplay within stable metal-organic cages (MOCs) presents great opportunities for applications in stimuli response and photocatalysis. Zr-MOCs represent a type of robust discrete hosts for such a design, but their host-guest chemistry in solution is hampered by the limited solubility. Here, by using pyridinium-derived cationic ligands with tetrakis(3,5-bis(trifluoromethyl)phenyl)borate (BArF-) as solubilizing counteranions, we report the preparation of soluble Zr-MOCs of different shapes (1-4) that are otherwise inaccessible through a conventional method. Enforced arrangement of the multiple electron-deficient pyridinium groups into one cage (1) leads to magnified positive electrostatic field and electron-accepting strength in favor of hosting electron-donating anions, including halides and tetraarylborates. The strong charge-transfer (CT) interactions activate guest-to-host photoinduced electron transfer (PET), leading to pronounced and regulable photochromisms. Both ground-state and radical structures of host and host-guest complexes have been unambiguously characterized by X-ray crystallography. The CT-enhanced PET also enables the use of 1 as an efficient photocatalyst for aerobic oxidation of tetraarylborates into biaryls and phenols. This work presents the solution assembly of soluble Zr-MOCs from cationic ligands with the assistance of solubilizing anions and highlights the great potential of harnessing host-guest CT for boosting PET-based functions and applications.

Tunable synthesis of heteroleptic zirconium-based porous coordination cages

Zirconium-based porous coordination cages have been widely studied and have shown to be potentially useful for many applications as a result of their tunability and stability, likely as a result of their status as a molecular equivalent to the small 8 Å tetrahedral pores of UiO-66 (Zr6(μ3-O)4(μ2-OH)4(C8O4H4)6). Functional groups attached to these molecular materials endow them with a range of tunable properties. While so-called multivariate MOFs containing multiple types of functional groups on different bridging ligands within a structure are common, incorporating multiple functional moieties in permanently microporous molecular materials has proved challenging. By applying a mixed-ligand, or heteroleptic, synthesis strategy to cage formation, we have designed a straight-forward, one-pot synthesis of 10 Å zirconium-based molecular cages in a basket-shaped, or Zr12L6, geometry containing 3 : 3 ratios of combinations of two types of functional moieties from 11 different ligand options. Additionally, using more sterically hindered ligands, such as 5-benzyloxybenzene dicarboxylate, we show that ligand size governs the resulting cage geometry. This method allows for multiple functional groups to be incorporated in molecular cages and the ratio of moieties incorporated can be easily controlled. With this strategy in hand, we show that ligands for which zirconium cage syntheses have been elusive, such as 2,5-dihydroxybenzene dicarboxylate, have now been successfully incorporated into porous structures.

Reductive Photocatalytic Proton-Coupled Electron Transfer by a Zirconium-Based Molecular Platform

Reductive proton-coupled electron transfer (PCET) has important energetic implications in numerous synthetic and natural redox processes. The development of catalytic systems that can mediate such transformations has become an attractive target, especially when light is used to generate the reactive species towards solar-to-chemicals conversion. However, such approach becomes challenged by kinetic competition with H2 evolution. Here we describe the excited state reactivity of a molecular Zr-based platform under visible light irradiation for the efficient reduction of multiple bonds. Mechanistic investigations shine light on a charge separation process that colocalizes an excited electron and an acidic proton to promote selective PCET. We further leveraged this reactivity for the photocatalytic reduction of a variety of organic substrates. Our results demonstrate the promise of this molecular platform to design strong photocatalytic PCET mediators for reductive transformations. More broadly, we also show the potential relevance of PCET mechanisms in the (photo)redox chemistry of Zr-based molecular materials.

Space Exploration of Metal-Organic Frameworks in the Mesopore Regime

ConspectusThe past decades have witnessed the proliferation of porous materials offering high surface areas and the revolution in gas storage and separation, where metal-organic frameworks (MOFs) stand out as an important family. Alongside the pursuit of higher surface area, the increase in the size of guests, such as nanoparticles and biomolecules, has also led to the demand for larger space defined by the pores and cages within the MOF structure, from the conventional micropore regime (<2 nm) toward the mesopore regime (2-50 nm). Among the essential elements in the design of MOFs, molecular building blocks, their coordination and spatial arrangement, the chemistry for molecular design, and coordination bonds have become relatively mature, offering precise control of the shape and environment of the molecularly defined 3D cages; however, the correlation between the geometrical parameters and the size of polyhedrons describing the cages, concerning the spatial arrangement of building blocks, is much less explored.In this Account, we made efforts to associate actual cage size with the critical geometrical components, vertices, edges, connectivity, rings, and underlying polyhedrons, as well as the combination of components of various types in the design of MOFs. Several trends were found, such as influence from connectivity and expansion efficiency, offering insights into the construction of 3D cages in MOFs. This enables the creation of extremely large mesoporous cages in MOFs with an internal diameter up to 11.4 nm from relatively small building blocks. Furthermore, we discuss a strategy of partial removal or replacement of organic linkers to construct mesoporous cages from readily known topologies.All of the above efforts urged us to ask the following questions: Is there any limit in the sculpting of the 3D space from molecules? How large an area can one chemical bond support? The answer to these questions will deepen the knowledge of efficient utilization of chemical bonds in the sculpting of 3D spaces and guide the design of larger mesopores. Several general geometrical principals emerged: (1) Expansion efficiency and radius are positively correlated with the number of vertices. (2) Increase in the number of vertices and decrease of their connectivity favor the construction and expansion of large cages. (3) The boundary of the 3D space constructed by the chemical bonds is related to the polyhedron type and determined by the energy involved in crystallinity. Such principals are likely to be applicable also in the design of isolated cages in supramolecular chemistry. In addition to the structural design and synthesis, the applications of these mesoporous cages in MOFs are also summarized.

Double-Bridging Increases the Stability of Zinc(II) Metal-Organic Cages

A key feature of coordination cages is the dynamic nature of their coordinative bonds, which facilitates the synthesis of complex polyhedral structures and their post-assembly modification. However, this dynamic nature can limit cage stability. Increasing cage robustness is important for real-world use cases. Here we introduce a double-bridging strategy to increase cage stability, where designed pairs of bifunctional subcomponents combine to generate rectangular tetratopic ligands within pseudo-cubic Zn8L6 cages. These cages withstand transmetalation, the addition of competing ligands, and nucleophilic imines, under conditions where their single-bridged congeners decompose. Our approach not only increases the stability and robustness of the cages while maintaining their polyhedral structure, but also enables the incorporation of additional functional units in proximity to the cavity. The double-bridging strategy also facilitates the synthesis of larger cages, which are inaccessible as single-bridged congeners.

Synthesis of highly soluble zirconium organic cages by iodine substitution toward a CO2/N2 separation membrane

Metal organic cages (MOCs) show promise as fillers in mixed-matrix membranes (MMMs) for gas separation; highly soluble MOCs are desirable for fabrication of high-compatibility membranes. Herein, we report an iodine substitution strategy to substantially increase the MOC solubility. The synthesized MOC of ZrT-NH2-I possesses over 10-fold higher solubility than the parent ZrT-NH2 in organic solvents whilst retaining the original molecular structure and permanent porosity. Such enhanced solubility allows for the effective integration of ZrT-NH2-I with an amidoxime polymer of intrinsic microporosity (PIM-PAO), resulting in a compatible MMM with a uniform distribution of MOC. The ZrT-NH2-I@PIM-PAO MMM demonstrates a CO2 permeability of 1377 barrer and a CO2/N2 gas selectivity of 45 which is 45 times that of the membrane made from ZrT-NH2. The permeability-selectivity performance not only surpasses the 2008 upper bound, but also exceeds those of currently available MMMs.

Bottom-up construction of chiral metal-peptide assemblies from metal cluster motifs

The exploration of artificial metal-peptide assemblies (MPAs) is one of the most exciting fields because of their great potential for simulating the dynamics and functionality of natural proteins. However, unfavorable enthalpy changes make forming discrete complexes with large and adaptable cavities from flexible peptide ligands challenging. Here, we present a strategy integrating metal-cluster building blocks and peptides to create chiral metal-peptide assemblies and get a family of enantiopure [R-/S-Ni3L2]n (n = 2, 3, 6) MPAs, including the R-/S-Ni6L4 capsule, the S-Ni9L6 trigonal prism, and the R-/S-Ni18L12 octahedron cage. X-ray crystallography shows MPA formation reactions are highly solvent-condition-dependent, resulting in significant changes in ligand conformation and discrete cavity sizes. Moreover, we demonstrate that a structure transformation from Ni18L12 to Ni9L6 in the presence of benzopyrone molecules depends on the peptide conformational selection in crystallization. This work reveals that a metal-cluster building block approach enables facile bottom-up construction of artificial metal-peptide assemblies.

Fluorescent Porous Materials Based on Aggregation-induced Emission for Biomedical Applications

Fluorescent porous materials based on aggregation-induced emission (AIE) are growing into a sparkling frontier in biomedical applications. Exploring those materials represents a win-win integration and has recently progressed at a rapid pace, mainly benefiting from intrinsic advantages including tunable pore size and structure, strong guest molecule encapsulation ability, superior biocompatibility, and photophysical outcomes. With the great significance and rapid progress in this area, this review provides an integrated picture on AIE luminogen-based porous materials. It encompasses inorganic, organic, and inorganic-organic porous materials, exploring fundamental concepts and the relationship between AIE performance and material design and highlighting significant breakthroughs and the latest trends in biomedical applications. In addition, some critical challenges and future perspectives in the development of AIE luminogen-based porous materials are also discussed.

From individuals to families: design and application of self-similar chiral nanomaterials

Establishing an intimate relationship between similar individuals is the beginning of self-extension. Various self-similar chiral nanomaterials can be designed using an individual-to-family approach, accomplishing self-extension. This self-similarity facilitates chiral communication, transmission, and amplification of synthons. We focus on describing the marriage of discrete cages to develop self-similar extended frameworks. The advantages of utilizing cage-based frameworks for chiral recognition, enantioseparation, chiral catalysis and sensing are highlighted. To further promote self-extension, fractal chiral nanomaterials with self-similar and iterated architectures have attracted tremendous attention. The beauty of a fractal family tree lies in its ability to capture the complexity and interconnectedness of a family's lineage. As a type of fractal material, nanoflowers possess an overarching importance in chiral amplification due to their large surface-to-volume ratio. This review summarizes the design and application of state-of-the-art self-similar chiral nanomaterials including cage-based extended frameworks, fractal nanomaterials, and nanoflowers. We hope this formation process from individuals to families will inherit and broaden this great chirality.

Recent Advances in Carborane-Based Crystalline Porous Materials

The field of carborane research has witnessed continuous development, leading to the construction and development of a diverse range of crystalline porous materials for various applications. Moreover, innovative synthetic approaches are expanding in this field. Since the first report of carborane-based crystalline porous materials (CCPMs) in 2007, the synthesis of carborane ligands, particularly through innovative methods, has consistently posed a significant challenge in discovering new structures of CCPMs. This paper provides a comprehensive summary of recent advances in various synthetic approaches for CCPMs, along with their applications in different domains. The primary challenges and future opportunities are expected to stimulate further multidisciplinary development in the field of CCPMs.

Supramolecular Assembly Frameworks (SAFs): Shaping the Future of Functional Materials

Supramolecular assembly frameworks (SAFs) represent a new category of porous materials, utilizing non-covalent interactions, setting them apart from metal-organic frameworks (MOFs) and covalent organic frameworks (COFs). This category includes but is not restricted to hydrogen-bonded organic frameworks and supramolecular organic frameworks. SAFs stand out for their outstanding porosity, crystallinity, and stability, alongside unique dissolution-recrystallization dynamics that enable significant structural and functional modifications. Crucially, their non-covalent assembly strategies allow for a balanced manipulation of porosity, symmetry, crystallinity, and dimensions, facilitating the creation of advanced crystalline porous materials unattainable through conventional covalent or coordination bond synthesis. Despite their considerable promise in overcoming several limitations inherent to MOFs and COFs, particularly in terms of solution-processability, SAFs have received relatively little attention in recent literature. This Minireview aims to shed light on standout SAFs, exploring their design principles, synthesis strategies, and characterization methods. It emphasizes their distinctive features and the broad spectrum of potential applications across various domains, aiming to catalyze further development and practical application within the scientific community.

Precise Pore Engineering of Zirconium Metal-Organic Cages for One-Step Ethylene Purification from Ternary Mixtures

One-step purification of ethylene from ternary mixtures (C2H2, C2H4, and C2H6) can greatly reduce the energy consumption of the separation process, but it is extremely challenging. Herein, we use crystal engineering and reticular chemistry to introduce unsaturated bonds (ethynyl and alkyne) into ligands, and successfully design and synthesized two novel Zr-MOCs (ZrT-1-ethenyl and ZrT-1-alkyne). The introduction of carbon-carbon unsaturated bonds provides abundant adsorption sites within the framework while modulating the pore window size. Comprehensive characterization techniques including single crystal and powder X-ray diffraction, as well as electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS) confirm that ZrT-1-ethenyl and ZrT-1-alkyne possess an isostructural framework with ZrT-1 and ZrT-1-Me, respectively. Adsorption isotherms and breakthrough experiments combined with theoretical calculations demonstrate that ZrT-1-ethenyl can effectively remove trace C2H2 and C2H6 in C2H4 and achieve separation of C2H2 from C2H4 and CO2. ZrT-1-ethenyl can also directly purify C2H4 in liquid solutions. This work provides a benchmark for MOCs that one-step purification of ethylene from ternary mixtures.

Room-Temperature Synthesis of Covalently Bridged MOP@TpPa-CH3 Composite Photocatalysts for Artificial Photosynthesis

The conversion of CO2 into useful chemicals via photocatalysts is a promising strategy for resolving the environmental problems caused by the addition of CO2. Herein, a series of composite photocatalysts MOP@TpPa-CH3 based on MOP-NH2 and TpPa-CH3 through covalent bridging have been prepared via a facile room-temperature evaporation method and employed for photocatalytic CO2 reduction. The photocatalytic performances of MOP@TpPa-CH3 are greater than those of TpPa-CH3 and MOP-NH2, where the CO generation rate of MOP@TpPa-CH3 under 10% CO2 still reaches 119.25 μmol g-1 h-1, which is 2.18 times higher than that under pure CO2 (54.74 μmol g-1 h-1). To investigate the structural factors affecting the photocatalytic activity, MOP@TBPa-CH3 without C═O groups is synthesized, and the photoreduction performance is also evaluated. The controlling experimental results demonstrate that the excellent photoreduction CO2 performance of MOP@TpPa-CH3 in a 10% CO2 atmosphere is due to the presence of C═O groups in TpPa-CH3. This work offers a new design and construction strategy for novel MOP@COF composites.

Additive-Assisted Forming High-Quality Thin Films of Sn-Oxo Cluster for Nanopatterning

Recently, metal-oxo clusters (MOCs) have attracted significant interest in fabricating nanoscale patterns in semiconductors via lithography. However, many MOCs are highly crystalline, making it difficult for them to form films and hindering subsequent nanopatterning processes. In this study, we developed a novel and simple method to enhance the film-forming ability of aromatic tetranuclear Sn-oxo clusters by adding additives. Theoretical calculations and Fourier-transform infrared (FTIR) analysis revealed the formation of intermolecular hydrogen bonds between the Sn-oxo clusters and additives, which induced a crystal-gel phase transition at -20 °C, thereby inhibiting the easy crystallization of the Sn-oxo clusters. High-quality and uniform thin films with surface roughness below 0.3 nm were prepared via spin coating. The obtained thin films exhibited good lithographic performance under deep ultraviolet (DUV), electron beam, and extreme-ultraviolet irradiation without a photo acid generator/photoinitiator, and 13- and 21 nm-wide line patterns were obtained on the films via electron-beam and extreme-ultraviolet lithographies. This study will pave the way for the further investigation of novel MOCs for advanced lithography and other thin-film applications.

Designing External Pores of Aluminum Oxo Polyhedrons for Efficient Iodine Capture

Although metal-organic polyhedra (MOPs) expansion has been studied to date, it is still a rare occurrence for their porous intermolecular assembly for iodine capture. The major limitation is the lack of programmable and controllable methods for effectively constructing and utilizing the exterior cavities. Herein, the goal of programmable porous intermolecular assembly is realized in the first family of aluminum oxo polyhedrons (AlOPs) using ligands with directional H-bonding donor/acceptor pairs and auxiliary alcohols as structural regulation sites. The approach has the advantage of avoiding the use of expensive edge-directed ditopic and face-directed tritopic ligands in the general synthesis strategy of MOPs. Combining theoretical calculations and experiments, the intrinsic relationship is revealed between alcohol ligands and the growth mechanism of AlOPs. The maximum I2 uptake based on the mass gain during sorption corresponds to 2.35 g g-1, representing the highest reported I2 sorption by an MOP. In addition, it can be easily regenerated and maintained the iodine sorption capacity, revealing its further potential application. This method of constructing stable and programmable porous materials will provide a new way to solve problems such as radionuclide capture.

Isolation of a copper photocatalyst on a metal-organic cage for the sulfonylation of aryl halides resulting from visible-light-mediated C(sp2)-S cross-coupling

A Ce-based metal-organic tetrahedron was assembled for preserving the uncoordinated nature of 2,2'-bipyridyl groups to form a Cu-based photocatalyst, which protected CuI centers from intermolecular deactivation and showed high photocatalytic activity for the visible-light-mediated C(sp²)-S cross-coupling.

Unlocking High Porosity: Post-Synthetic Solvothermal Treatment of Cu-Paddlewheel Based Metal-Organic Cages

Metal-organic cages (MOCs) have garnered significant attention due to their unique discrete structures, intrinsic porosity, designability, and tailorability. However, weak inter-cage interactions, such as van der Waals forces and hydrogen bonding can cause solid-state MOCs to lose structural integrity during desolvation, leading to the loss of porosity. In this work, a novel strategy to retain the permanent porosity of Cu-paddlewheel-based MOCs, enabling their use as heterogeneous catalysts is presented. Post-synthetic solvothermal treatments in non-coordinating solvents, mesitylene, and p-xylene, effectively preserve the packing structures of solvent-evacuated MOCs while preventing cage agglomeration. The resulting MOCs exhibit an exceptional N2 sorption capacity, with a high surface area (SBET = 1934 m2 g-1 for MOP-23), which is among the highest reported for porous MOCs. Intriguingly, while the solvothermal treatment reduced Cu(II) to Cu(I) in the Cu-paddlewheel clusters, the MOCs with mixed-valenced Cu(I)/Cu(II) maintained their crystallinity and permanent porosity. The catalytic activities of these MOCs are successfully examined in copper(I)-catalyzed hydrative amide synthesis, highlighting the prospect of MOCs as versatile reaction platforms.

Dimensional Reduction of Metal-Organic Frameworks for Photocatalytic Synthesis of Fused Tetracyclic Heterocycles

Heterogeneous palladium catalysts with high efficiency, high Pd atom utilization, simplified separation, and recycle have attracted considerable attention in the field of synthetic chemistry. Herein, we reported a zirconium-based two-dimensional metal-organic framework (2D-MOF)-based Pd(II) photocatalyst (Zr-Ir-Pd) by merging the Ir photosensitizers and Pd(II) species into the skeletons of the 2D-MOF for the Pd(II)-catalyzed oxidation reaction. Morphological and structural characterization identified that Zr-Ir-Pd with a specific nanoflower-like structure consists of ultrathin 2D-MOF nanosheets (3.85 nm). Due to its excellent visible-light response and absorption capability, faster transfer and separation of photogenerated carriers, more accessible Pd active sites, and low mass transfer resistance, Zr-Ir-Pd exhibited boosted photocatalytic activity in catalyzing sterically hindered isocyanide insertion of diarylalkynes for the construction of fused tetracyclic heterocycles, with up to 12 times the Pd catalyst turnover number than the existing catalytic systems. In addition, Zr-Ir-Pd inhibited the competitive agglomeration of Pd(0) species and could be reused at least five times, owing to the stabilization of 2D-MOF on the single-site Pd and Ir sites. Finally, a possible mechanism of the photocatalytic synthesis of fused tetracyclic heterocycles catalyzed by Zr-Ir-Pd was proposed.

Coordination cages integrated into swelling poly(ionic liquid)s for guest encapsulation and separation

Coordination cages have been widely reported to bind a variety of guests, which are useful for chemical separation. Although the use of cages in the solid state benefits the recycling, the flexibility, dynamicity, and metal-ligand bond reversibility of solid-state cages are poor, preventing efficient guest encapsulation. Here we report a type of coordination cage-integrated solid materials that can be swelled into gel in water. The material is prepared through incorporation of an anionic FeII4L6 cage as the counterion of a cationic poly(ionic liquid) (MOC@PIL). The immobilized cages within MOC@PILs have been found to greatly affect the swelling ability of MOC@PILs and thus the mechanical properties. Importantly, upon swelling, the uptake of water provides an ideal microenvironment within the gels for the immobilized cages to dynamically move and flex that leads to excellent solution-level guest binding performances. This concept has enabled the use of MOC@PILs as efficient adsorbents for the removal of pollutants from water and for the purification of toluene and cyclohexane. Importantly, MOC@PILs can be regenerated through a deswelling strategy along with the recycling of the extracted guests.

Humidity-Induced Self-Oscillating and Self-Healing Hypercrosslinked Metal-Organic Polyhedra Membranes

Designing autonomously oscillating materials is highly desirable for emerging smart material fields but challenging. Herein, a type of hypercrosslinked metal-organic polyhedra (HCMOPs) membranes formed by covalent crosslinking of boronic acid-modified Zr-based MOPs with polyvinyl alcohol (PVA) are rationally designed. In these membranes, MOPs serve as high-connectivity nodes and provide dynamic borate bonds with PVA in hypercrosslinked networks, which can be broken/formed reversibly upon the stimulus of water vapor. The humidity response characteristic of HCMOPs promotes their self-oscillating and self-healing properties. HCMOP membranes can realize a self-oscillating property above the water surface even after loading a cargo that is 1.5 times the weight of the membrane due to the fast adsorption and desorption kinetics. Finally, the HCMOP actuator can realize energy conversion from mechanical energy into electricity when coupled with a piezoelectric membrane. This work not only paves a new avenue to construct MOP-polymer hybrid materials but also expands the application scopes of MOPs for smart actuation devices.

Bridging the Homogeneous and Heterogeneous Catalysis by Supramolecular Metal-Organic Cages with Varied Packing Modes

Integrating the advantages of homogeneous and heterogeneous catalysis has proved to be an optimal strategy for developing catalytic systems with high efficiency, selectivity, and recoverability. Supramolecular metal-organic cages (MOCs), assembled by the coordination of metal ions with organic linkers into discrete molecules, have performed solvent processability due to their tunable packing modes, endowing them with the potential to act as homogeneous or heterogeneous catalysts in different solvent systems. Here, the design and synthesis of a series of stable {Cu3} cluster-based tetrahedral MOCs with varied packing structures are reported. These MOCs, as homogeneous catalysts, not only show high catalytic activity and selectivity regardless of substrate size during the CO2 cycloaddition reaction, but also can be easily recovered from the reaction media through separating products and co-catalysts by one-step work-up. This is because that these MOCs have varied solubilities in different solvents due to the tunable packing of MOCs in the solid state. Moreover, the entire catalytic reaction system is very clean, and the purity of cyclic carbonates is as high as 97% without further purification. This work provides a unique strategy for developing novel supramolecular catalysts that can be used for homogeneous catalysis and recycled in a heterogeneous manner.

Ultrasensitive Visual Tracking of Toxic Cyanide Ions in Biological Samples Using Biocompatible Metal-Organic Frameworks Architectures

The extraordinary accumulation of cyanide ions within biological cells is a severe health risk. Detecting and tracking toxic cyanide ions within these cells by simple and ultrasensitive methodologies are of immense curiosity. Here, continuous tracking of ultimate levels of CN--ions in HeLa cells was reported employing biocompatible branching molecular architectures (BMAs). These BMAs were engineered by decorating colorant-laden dendritic branch within and around the molecular building hollows of the geode-shelled nanorods of organic-inorganic Al-frameworks. Batch-contact methods were utilized to assess the potential of hollow-nest architecture for inhibition/evaluation of toxicant CN--ions within HeLa cells. The nanorod BMAs revealed significant potential capabilities in monitoring and tracking of CN- ions (88 parts per trillion) in biological trials within seconds. These results demonstrated sufficient evidence for the compatibility of BMAs during HeLa cell exposure. Under specific conditions, the BMAs were utilized for in-vitro fluorescence tracking/sensing of CN- in HeLa cells. The cliff swallow nest with massive mouths may have the potential to reduce the health hazards associated with toxicant exposure in biological cells.

Hierarchical Self-Assembly of Capsule-Shaped Zirconium Coordination Cages with Quaternary Structure

Biological macromolecules exhibit emergent functions through hierarchical self-assembly, a concept that is extended to design artificial supramolecular assemblies. Here, the first example of breaking the common parallel arrangement of capsule-shaped zirconium coordination cages is reported by constructing the hierarchical porous framework ZrR-1. ZrR-1 adopts a quaternary structure resembling protein and contains 12-connected chloride clusters, representing the highest connectivity for zirconium-based cages reported thus far. Compared to the parallel framework ZrR-2, ZrR-1 demonstrated enhanced stability in acidic aqueous solutions and a tenfold increase in BET surface area (879 m2  g-1 ). ZrR-1 also exhibits excellent proton conductivity, reaching 1.31 × 10-2 S·cm-1 at 353 K and 98% relative humidity, with a low activation energy of 0.143 eV. This finding provides insights into controlling the hierarchical self-assembly of metal-organic cages to discover superstructures with emergent properties.

Heterometallic cages: synthesis and applications

High symmetry metallosupramolecular architectures (MSAs) have been exploited for a range of applications including molecular recognition, catalysis and drug delivery. Recently there have been increasing efforts to enhance those applications by generating reduced symmetry MSAs. While there are several emerging methods for generating lower symmetry MSAs, this tutorial review examines the general methods used for synthesizing heterometallic MSAs with a particular focus on heterometallic cages. Additionally, the intrinsic properties of the cages and their potential emerging applications as host-guest systems and reaction catalysts are described.

Exploration and Insights on Topology Adjustment of Giant Heterometallic Cages Featuring Inorganic Skeletons Assisted by Machine Learning

Inorganic molecular cages are emerging multifunctional molecular-based platforms with the unique merits of rigid skeletons and inherited properties from constituent metal ions. However, the sensitive coordination bonds and vast synthetic space have limited their systematic exploration. Herein, two giant cage-like clusters featuring the organic ligand-directed inorganic skeletons of Ni4[La74Ni104(IDA)96(OH)184(C2O4)12(H2O)76]·(NO3)38·(H2O)120 (La74Ni104, 5 × 5 × 3 - C2O4) and [La84Ni132(IDA)108(OH)168(C2O4)24(NO3)12(H2O)116]·(NO3)72·(H2O)296 (La84Ni132, 5 × 5 × 5 - C2O4) were discovered by a high-throughput synthetic search. With the assistance of machine learning analysis of the experimental data, phase diagrams of the two clusters in a four-parameter synthetic space were depicted. The effect of alkali, oxalate, and other parameters on the formation of clusters and the mechanism regulating the size of two n × m × l clusters were elucidated. This work uses high-throughput synthesis and machine learning methods to improve the efficiency of 3d-4f cluster discovery and finds the highest-nuclearity 3d-4f cluster to date by regulating the size of the n × m × l inorganic cages through oxalate ions, which pushes the synthetic methodology study on elusive inorganic giant cages in a significantly systematic way.

Isoreticular Preparation of Tetraphenylethylene-based Multicomponent Metallacages towards Light-Driven Hydrogen Production

Multicomponent metallacages can integrate the functions of their different building blocks to achieve synergetic effects for advanced applications. Herein, based on metal-coordination-driven self-assembly, we report the preparation of a series of isoreticular tetraphenylethylene-based metallacages, which are well characterized by multinuclear NMR, ESI-TOF-MS and single-crystal X-ray diffraction techniques. The suitable integration of photosensitizing tetraphenylethylene units as faces and Re catalytic complexes as the pillars into a single metallacage offers a high photocatalytic hydrogen production rate of 1707 μmol g-1  h-1 , which is one of the highest values among reported metallacages. Femtosecond transient absorption and DFT calculations reveal that the metallacage can serve as a platform for the precise and organized arrangement of the two building blocks, enabling efficient and directional electron transfer for highly efficient photocatalytic performance. This study provides a general strategy to integrate multifunctional ligands into a certain metallacage to improve the efficiency of photocatalytic hydrogen production, which will guide the future design of metallacages towards photocatalysis.

Redox-Controlled Self-Assembly of Vanadium-Seamed Hexameric Pyrogallol[4]Arene Nanocapsules

Here we report the controlled self-assembly of vanadium-seamed metal-organic nanocapsules with specific metal oxidation state distributions. Three supramolecular assemblies composed of the same numbers of components including 24 metal centers and six pyrogallol[4]arene ligands were constructed: a VIII24L6 capsule, a mixed-valence VIII18VIV6L6 capsule, and a VIV24L6 capsule. Crystallographic studies of the new capsules reveal their remarkable structural complexity and geometries, while marked differences in metal oxidation state distribution greatly affect the photoelectric conversion properties of these assemblies. This work therefore represents a significant step forward in the construction of intricate metal-organic architectures with tailored structure and functionality.

Zirconium metal-organic cage decorated with squaramides imparts dual activation for chemical fixation of CO2 under mild conditions

A "two-in-one" dual activation strategy has been developed to give high-density hydrogen-bonding (HB) active units and Lewis acid (LA) active centres by immobilizing squaramides into metal-organic cages (MOCs). The obtained MOC served as an efficient catalyst for the chemical fixation of CO2 under mild conditions up to 99% yields with good recyclability, and the mechanism of high catalytic activity has been further explored.

Cofacial porphyrin organic cages. Metals regulating excitation electron transfer and CO2 reduction electrocatalytic properties

Herein, we introduce a comprehensive study of the photophysical behaviors and CO2 reduction electrocatalytic properties of a series of cofacial porphyrin organic cages (CPOC-M, M = H2, Co(ii), Ni(ii), Cu(ii), Zn(ii)), which are constructed by the covalent-bonded self-assembly of 5,10,15,20-tetrakis(4-formylphenyl)porphyrin (TFPP) and chiral (2-aminocyclohexyl)-1,4,5,8-naphthalenetetraformyl diimide (ANDI), followed by post-synthetic metalation. Electronic coupling between the TFPP donor and naphthalene-1,4 : 5,8-bis(dicarboximide) (NDI) acceptor in the metal-free cage is revealed to be very weak by UV-vis spectroscopic, electrochemical, and theoretical investigations. Photoexcitation of CPOC-H2, as well as its post-synthetic Zn and Co counterparts, leads to fast energy transfer from the triplet state porphyrin to the NDI unit according to the femtosecond transient absorption spectroscopic results. In addition, CPOC-Co enables much better electrocatalytic activity for CO2 reduction reaction than the other metallic CPOC-M (M = Ni(ii), Cu(ii), Zn(ii)) and monomeric porphyrin cobalt compartment, supplying a partial current density of 18.0 mA cm-2 at -0.90 V with 90% faradaic efficiency of CO.

Potential of nonporous adaptive crystals for hydrocarbon separation

Hydrocarbon separation is an important process in the field of petrochemical industry, which provides a variety of raw materials for industrial production and a strong support for the development of national economy. However, traditional separation processes involve huge energy consumption. Adsorptive separation based on nonporous adaptive crystal (NAC) materials is considered as an attractive green alternative to traditional energy-intensive separation technologies due to its advantages of low energy consumption, high chemical and thermal stability, excellent selective adsorption and separation performance, and outstanding recyclability. Considering the exceptional potential of NAC materials for hydrocarbon separation, this review comprehensively summarizes recent advances in various supramolecular host-based NACs. Moreover, the current challenges and future directions are illustrated in detail. It is expected that this review will provide useful and timely references for researchers in this area. Based on a large number of state-of-the-art studies, the review will definitely advance the development of NAC materials for hydrocarbon separation and stimulate more interesting studies in related fields.

Water-Soluble Ionic Metal-Organic Polyhedra as a Versatile Platform for Enzyme Bio-immobilization

Metal-organic polyhedra (MOPs) can act as elementary structural units for the design of modular porous materials; however, their association with biological systems remains greatly restricted by their typically low stabilities and solubilities in water. Herein, we describe the preparation of novel MOPs bearing either anionic or cationic groups and exhibiting a high affinity for proteins. Simple mixing of the protein bovine serum albumin (BSA) and ionic MOP aqueous solutions resulted in the spontaneous formation of MOP-protein assemblies, in a colloidal state or as solid precipitates depending on the initial mixing ratio. The versatility of the method was further illustrated using two enzymes, catalase and cytochrome c, with different sizes and isoelectric points (pI's) below and above 7. This mode of assembly led to the high retention of catalytic activity and enabled recyclability. Furthermore, the co-immobilization of cytochrome c with highly charged MOPs resulted in a substantial 44-fold increase of its catalytic activity.

A copper-seamed coordination nanocapsule as a semiconductor photocatalyst for molecular oxygen activation

Here we report that a Cu²⁺-seamed coordination nanocapsule can serve as an efficient semiconductor photocatalyst for molecular oxygen activation. This capsule was constructed through a redox reaction facilitated self-assembly of cuprous bromide and C-pentyl-pyrogallol[4]arene. Photophysical and electrochemical studies revealed its strong visible-light absorption and photocurrent polarity switching effect. This novel molecular solid material is capable of activating molecular oxygen into reactive oxygen species under simulated sunlight irradiation. The oxygen activation process has been exploited for catalyzing aerobic oxidation reactions. The present work provides new insights into designing nonporous discrete metal-organic supramolecular assemblies for solar-driven molecular oxygen activation.

From an aluminum oxo cluster to an aluminum oxo cluster organic cage

Presented herein is an example of the conversion of an aluminum oxo cluster (AlOC) to an aluminum oxo cluster organic cage (AlOCOC). We successfully synthesized the first example of an aluminum cluster-based organic cage-Al₁₂ tetrahedral cage via an Al₃ cluster. The use of 4-pyrazolecarboxylic acid plays an important role in the construction of the organic cage. Due to the presence of partially deprotonated ligands, the hydrogen-bonding interactions between the discrete tetrahedra generate porous supramolecular structures. Considering the high porosity and the abundant N-H sites, we further investigated the performance of the material towards iodine capture.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

Supramolecular Coordination Cages for Artificial Photosynthesis and Synthetic Photocatalysis

Because sunlight is the most abundant energy source on earth, it has huge potential for practical applications ranging from sustainable energy supply to light driven chemistry. From a chemical perspective, excited states generated by light make thermodynamically uphill reactions possible, which forms the basis for energy storage into fuels. In addition, with light, open-shell species can be generated which open up new reaction pathways in organic synthesis. Crucial are photosensitizers, which absorb light and transfer energy to substrates by various mechanisms, processes that highly depend on the distance between the molecules involved. Supramolecular coordination cages are well studied and synthetically accessible reaction vessels with single cavities for guest binding, ensuring close proximity of different components. Due to high modularity of their size, shape, and the nature of metal centers and ligands, cages are ideal platforms to exploit preorganization in photocatalysis. Herein we focus on the application of supramolecular cages for photocatalysis in artificial photosynthesis and in organic photo(redox) catalysis. Finally, a brief overview of immobilization strategies for supramolecular cages provides tools for implementing cages into devices. This review provides inspiration for future design of photocatalytic supramolecular host-guest systems and their application in producing solar fuels and complex organic molecules.

Altering the solubility of metal-organic polyhedra via pendant functionalization of Cp3Zr3O(OH)3 nodes

The chemistry of zirconium-based metal-organic polyhedra (ZrMOPs) is often limited by their poor solubilities. Despite their attractive features-including high yielding and facile syntheses, predictable topologies, high stability, and tunability-problematic solubilities have caused ZrMOPs to be under-studied and under-applied. Although these cages have been synthesized with a wide variety of carboxylate-based bridging ligands, we explored a new method for ZrMOP functionalization via node-modification, which we hypothesized could influence solubility. Herein, we report ZrMOPs with benzyl-, vinylbenzyl-, and trifluoromethylbenzyl-pendant groups decorating cyclopentadienyl moieties. The series was characterized by ¹H/¹⁹F NMR, high-resolution mass spectrometry, infrared spectroscopy, and single-crystal X-ray diffraction. The effects of node functionalities on ZrMOP solubility were quantified using inductively coupled plasma mass spectrometry. Substitution caused a decrease in water solubility, but for certain organic solvents, e.g. DMF, solubility could be enhanced by ∼20×, from 16 μM for the unfunctionalized cage to 310 μM for the vinylbenzyl- and trifluoromethylbenzyl-cages.