Matchmaking in Catalyst-Transfer Polycondensation: Optimizing Catalysts based on Mechanistic Insight

Homochiral Helical Poly(thiophene)s Accessed via Living Catalyst-Transfer Polymerization

Synthetic helical polymers form compact, ordered, and inherently chiral structures, enabling their uses in biomimetic applications as well as catalysis. A challenge in using synthetic helical polymers, however, is their tendency to be sensitive to pH and the presence of nucleophiles, Lewis-acids, or metal ions. We report a strategy to overcome these shortcomings by adapting catalyst-transfer polymerization, a living chain-growth polymerization typically used to access linear conjugated polymers, for the synthesis of helical poly(thiophene)s. We demonstrate that the helical poly(thiophene)s can be synthesized with a single helicity, incorporated into block copolymers, and functionalized at the chain-ends, enabling further conjugation and functionalization. The helical poly(thiophene)s are stable to a variety of conditions, providing benefits over other helical polymers which contain sensitive imine or carbonyl-based functional groups. We anticipate that the ability to access homochiral, heterotelechelic helical conjugated polymers and copolymers will enable new uses of these materials in optoelectronics as well as in applications for mimicking biomacromolecules and other polymers with precisely defined sequences.

High-Intensity Circular Dichroism of Head-To-Tail Regioregular Poly(1,4-Phenylene)s in the Aggregated State

Circular dichroism (CD) studies on poly(1,4-phenylene)s bearing a chiral side chain in the aggregated conditions were carried out. Little CD was observed in a solution form, while addition of a poor solvent into the polyphenylene solution induced aggregation and a strong CD was observed, accordingly. Applying the controlled degree of polymerization (DP) of poly(1,4-phenylene) in the use of bidentate diphosphine Chiraphos as a ligand for the nickel catalyst, the relationship of DP with CD strength was studied to reveal to show the highest CD at the DP=84 (gabs=ca. 2×10-2). It was also found that the related aggregation was observed in good solvent 1,2-dichloroethane upon standing the solution at 4 °C for 3-23 days to observe gabs=ca. 10-1. Studies on the substituent effect of poly(1,4-phenylene) suggested that CD behaviors were dependent on the type of non-chiral substituent on the aromatic ring as well as the side-chain chirality.

Nickel-Based Catalysts for the Selective Monoarylation of Dichloropyridines: Ligand Effects and Mechanistic Insights

This report describes a detailed study of Ni phosphine catalysts for the Suzuki-Miyaura coupling of dichloropyridines with halogen-containing (hetero)aryl boronic acids. With most phosphine ligands these transformations afford mixtures of mono- and diarylated cross-coupling products as well as competing oligomerization of the boronic acid. However, a ligand screen revealed that PPh2Me and PPh3 afford high yield and selectivity for monoarylation over diarylation as well as minimal competing oligomerization of the boronic acid. Several key observations were made regarding the selectivity of these reactions, including: (1) phosphine ligands that afford high selectivity for monoarylation fall within a narrow range of Tolman cone angles (between 136° and 157°); (2) more electron-rich trialkylphosphines afford predominantly diarylated products, while less-electron rich di- and triarylphosphines favor monoarylation; (3) diarylation proceeds via intramolecular oxidative addition; and (4) the solvent (MeCN) plays a crucial role in achieving high monoarylation selectivity. Experimental and DFT studies suggest that all these data can be explained based on the reactivity of a key intermediate: a Ni0-π complex of the monoarylated product. With larger, more electron-rich trialkylphosphine ligands, this π complex undergoes intramolecular oxidative addition faster than ligand substitution by the MeCN solvent, leading to selective diarylation. In contrast, with relatively small di- and triarylphosphine ligands, associative ligand substitution by MeCN is competitive with oxidative addition, resulting in selective formation of monoarylated products. The generality of this method is demonstrated with a variety of dichloropyridines and chloro-substituted aryl boronic acids. Furthermore, the optimal ligand (PPh2Me) and solvent (MeCN) are leveraged to achieve the Ni-catalyzed monoarylation of a broader set of dichloroarene substrates.

Mechanistic Origin of Ligand Effects on Exhaustive Functionalization During Pd-Catalyzed Cross-Coupling of Dihaloarenes

We describe a detailed investigation into why bulky ligands-those that enable catalysis at "12e -" Pd0-tend to promote overfunctionalization during Pd-catalyzed cross-couplings of dihalogenated substrates. After one cross-coupling event takes place, PdL initially remains coordinated to the π system of the nascent product. Selectivity for mono- vs. difunctionalization arises from the relative rates of π-decomplexation versus a second oxidative addition. Under the Suzuki coupling conditions in this work, direct dissociation of 12e - PdL from the π-complex cannot outcompete oxidative addition. Instead, Pd must be displaced from the π-complex as 14e - PdL(L') by a second incoming ligand L'. The incoming ligand is another molecule of dichloroarene if the reaction conditions do not include π-coordinating solvents or additives. More overfunctionalization tends to result when increased ligand or substrate sterics raises the energy of the bimolecular transition state for separating 14e - PdL(L') from the mono-cross-coupled product. This work has practical implications for optimizing selectivity in cross-couplings involving multiple halogens. For example, we demonstrate that small coordinating additives like DMSO can largely suppress overfunctionalization and that precatalyst structure can also impact selectivity.

A Ni0(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) complex as a catalyst precursor for oligothiophene and polythiophene synthesis

Nickel-catalyzed syntheses of oligothiophene and polythiophene were carried out with Ni(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) as a catalyst precursor. Studies on the ligand exchange of Ni(cod)(dq) revealed that a high temperature was necessary to replace COD and DQ with PPh3 and N-heterocyclic carbene IPr. A coupling reaction of a metalated 3-hexylthiophene with 2-chloro-3-hexylthiophene employing Ni(cod)(dq) with IPr proceeded with a remarkably reduced amount of homocoupling byproduct. Polymerization of 2-chloro-3-hexylthiophene with Ni(cod)(dq)/DPPP also resulted in the reduction of the regioregularity defect.

Influence of Metal Identity and Complex Nuclearity in Kumada Cross-Coupling Polymerizations with a Pyridine Diimine-Based Ligand Scaffold

Cross-coupling polymerizations have fundamentally changed the field of conjugated polymers (CPs) by expanding the scope of accessible materials. Despite the prevalence of cross-coupling in CP synthesis, almost all polymerizations rely on mononuclear Ni or Pd catalysts. Here, we report a systematic exploration of mono- and dinuclear Fe and Ni precatalysts with a pyridine diimine ligand scaffold for Kumada cross-coupling polymerization of a donor thiophene and an acceptor benzotriazole monomers. We observe that variation of the metal identity from Ni to Fe produces contrasting polymerization mechanisms, while complex nuclearity has a minimal impact on reactivity. Specifically, Fe complexes appear to catalyze step-growth Kumada polymerizations and can readily access both Csp2-Csp3 and Csp2-Csp2 cross-couplings, while Ni complexes catalyze chain-growth polymerizations and predominantly Csp2-Csp2 cross-couplings. Thus, our work sheds light on important design parameters for transition metal complexes used in cross-coupling polymerizations, demonstrates the viability of iron catalysis in Kumada polymerization, and opens the door to novel polymer compositions.

Stille type P-C coupling polycondensation towards phosphorus-crosslinked polythiophenes with P-regulated photocatalytic hydrogen evolution

Recently, exploring new type polymerization protocols has been a major driving force in advancing organic polymers into highly functional materials. Herein we report a new polycondensation protocol to implant the phosphorus (P) atom in the main backbone of crosslinked polythiophenes. The polycondensation harnesses a Stille phosphorus-carbon (P-C) coupling reaction between phosphorus halides and aryl stannanes that has not been reported previously. Mechanistic studies uncovered that the P-electrophile makes the reactivity of a catalytic Pd-center highly sensitive towards the chemical structures of aryl stannanes, which is distinct from the typical Stille carbon-carbon coupling reaction. The efficient P-C polycondensation afforded a series of P-crosslinked polythiophenes (PC-PTs). Leveraging on the direct P-crosslinking polymerization, solid-state ³¹P NMR studies revealed highly uniform crosslinking environments. Efficient post-polymerization P-chemistry was also applied to the PC-PTs, which readily yielded the polymers with various P-environments. As a proof of concept, new PC-PTs were applied as the photocatalysts for H₂ evolution under visible light irradiation. PC-PTs with an ionic P(Me)-center exhibit a H₂ evolution rate up to 2050 μmol h^-1 g^-1, which is much higher than those of PC-PTs with a P(O)-center (900 μmol h^-1 g^-1) and P(iii)-center (155 μmol h^-1 g^-1). For the first time, the studies reveal that regulating P-center environments can be an effective strategy for fine tuning the photocatalytic H₂ evolution performance of organic polymers.

Rethinking Catalyst Trapping in Ni-Catalyzed Thieno[3,2-b]thiophene Polymerization

Catalyst-transfer polymerization (CTP) is a chain-growth method used to synthesize conjugated polymers. Although CTP works well for most donor-type monomers, the polymerization stalls with thieno[3,2-b]thiophene when using Ni catalysts. Previous reports have rationalized this result by suggesting that the catalyst is trapped in a Ni0 π-complex with the highly electron-rich arene. In this study, evidence is provided that the catalyst trap is more likely a NiII complex that arises from oxidative insertion of Ni0 into the C-S bonds of thieno[3,2-b]thiophene. This result is consistent with the known reactivity of Ni0 complexes toward S-heteroarenes and is supported herein by 31P nuclear magnetic resonance spectra acquired in situ, as well as data collected from small-molecule model reactions and density-functional theory simulations of the polymerization. We propose that this C-S insertion pathway and related off-cycle reactions may be relevant to understanding or enabling the CTP of other monomers with fused thiophenes.

Ring walking as a regioselectivity control element in Pd-catalyzed C-N cross-coupling

Ring walking is an important mechanistic phenomenon leveraged in many catalytic C-C bond forming reactions. However, ring walking has been scarcely studied under Buchwald-Hartwig amination conditions despite the importance of such transformations. An in-depth mechanistic study of the Buchwald-Hartwig amination is presented focussing on ligand effects on ring walking behavior. The ability of palladium catalysts to promote or inhibit ring walking is strongly influenced by the chelating nature of the ligand. In stark contrast, the resting state of the catalyst had no impact on ring walking behavior. Furthermore, the complexity of the targeted system enabled the differentiation between catalysts which undergo ring walking versus diffusion-controlled coupling. The insights gained in this study were leveraged to achieve desymmetrization of a tetrabrominated precursor. A small library of asymmetric 2,2′,7,7′-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9’spirobifluorene (SpiroOMeTAD) derivatives were successfully synthesized using this strategy highlighting the ease with which libraries of these compounds can be accessed for screening.

The phenomenon of „ring-walking‟, wherein a metal catalyst remains bound to a pi system as it migrates to another coupling site, is supported largely by circumstantial evidence. Here the authors perform an in-depth kinetic study of Buchwald- Hartwig animations with several catalytic systems delineating the phenomenon of ring walking from diffusion-controlled coupling.

Precision Synthesis of Conjugated Polymers Using the Kumada Methodology

Since the discovery of conductive poly(acetylene), the study of conjugated polymers has remained an active and interdisciplinary frontier between polymer chemistry, polymer physics, computation, and device engineering. One of the ultimate goals of polymer science is to reliably synthesize structures, similar to small molecule synthesis. Kumada catalyst-transfer polymerization (KCTP) is a powerful tool for synthesizing conjugated polymers with predictable molecular weights, narrow dispersities, specific end groups, and complex backbone architectures. However, expanding the monomer scope beyond the well-studied 3-alkylthiophenes to include electron-deficient and complex heterocycles has been difficult. Revisiting the successful applications of KCTP can help us gain new insight into the CTP mechanisms and thus inspire breakthroughs in the controlled polymerization of challenging π-conjugated monomers.In this Account, we highlight our efforts over the past decade to achieve controlled synthesis of homopolymers (p-type and n-type), copolymers (diblock and statistical), and monodisperse high oligomers. We first give a brief introduction of the mechanism and state-of-the-art of KCTP. Since the extent of polymerization control is determined by steric and electronic effects of both the catalyst and monomer, the polymerization can be optimized by modifying monomer and catalyst structures, as well as finding a well-matched monomer-catalyst system. We discuss the effects of side-chain steric hindrance and halogens in the context of heavy atom substituted monomers. By moving the side-chain branch point one carbon atom away from the heterocycle to alleviate steric crowding and stabilize the catalyst resting state, we were able to successfully control the polymerization of new tellurophene monomers. Inspired by innocent role of the sterically encumbered 2-transmetalated 3-alkylthiophene monomer, we introduce the treatment of hygroscopic monomers with a bulky Grignard compound as a water-scavenger for the improved synthesis of water-soluble conjugated polymers. For challenging electron-deficient monomers, we discuss the design of new Ni(II)diimine catalysts with electron-donating character which enhance the stability of the association complex between the catalyst and the growing polymer chain, resulting in the quasi-living synthesis of n-type polymers. Beyond n-type homopolymers, the Ni(II)diimine catalysts are also capable of producing electron-rich and electron-deficient diblock and statistical copolymers. We discuss how density functional theory (DFT) calculations elucidate the role of catalyst steric and electronic effects in controlling the synthesis of π-conjugated polymers. Moreover, we demonstrate the synthesis of monodisperse high oligomers by temperature cycling, which takes full advantage of the unique character of KCTP in that it proceeds through distinct intermediates that are not reactive. The insight we gained thus far leads to the first example of isolated living conjugated polymer chains prepared by a standard KCTP procedure, with general applicability to different monomers and catalytic systems. In summarizing a decade of innovation in KCTP, we hope this Account will inspire future development in the field to overcome key challenges including the controlled synthesis of electron-deficient heterocycles, complex and high-performance systems, and degradable and recyclable materials as well as cutting-edge catalyst design.

Light Directs Monomer Coordination in Catalyst-Free Grignard Photopolymerization

π-Conjugated polymers can serve as active layers in flexible and lightweight electronics and are conventionally synthesized by transition-metal-mediated polycondensation at elevated temperatures. We recently reported a photopolymerization of electron-deficient heteroaryl Grignard monomers that enables the catalyst-free synthesis of n-type π-conjugated polymers. Herein, we describe an experimental and computational investigation into the mechanism of this photopolymerization. Spectroscopic studies performed in situ and after quenching reveal that the propagating chain is a radical anion with halide end groups. DFT calculations for model oligomers suggest a Mg-templated S_RN1-type coupling, in which Grignard monomer coordination to the radical anion chain avoids the formation of free sp² radicals and allows C-C bond formation with very low barriers. We find that light plays an unusual role in the reaction, photoexciting the radical anion chain to shift electron density to the termini and thus enabling productive monomer binding.

Programmable Assembly of π-Conjugated Polymers

π-Conjugated polymers have numerous applications due to their advantageous optoelectronic and mechanical properties. These properties depend intrinsically on polymer ordering, including crystallinity, orientation, morphology, domain size, and π-π interactions. Programming, or deliberately controlling the composition and ordering of π-conjugated polymers by well-defined inputs, is a key facet in the development of organic electronics. Here, π-conjugated programming is described at each stage of material development, stressing the links between each programming mode. Covalent programming is performed during polymer synthesis such that complex architectures can be constructed, which direct polymer assembly by governing polymer orientation, π-π interactions, and morphological length-scales. Solution programming is performed in a solvated state as polymers dissolve, aggregate, crystallize, or react in solution. Solid-state programming occurs in the solid state and is governed by polymer crystallization, domain segregation, or gelation. Recent progress in programming across these stages is examined, highlighting order-dependent features and assembly techniques that are unique to π-conjugated polymers. This should serve as a guide for delineating the many ways of directing π-conjugated polymer assembly to control ordering, structure, and function, enabling the further development of organic electronics.

Catalytic Synthesis of Conjugated Azopolymers from Aromatic Diazides

Conjugated polymers containing main chain azoarene repeat units are synthesized by a dinickel catalyzed N=N coupling reaction of aromatic diazides. The polymerization exhibits broad substrate scope and is compatible with heterocycles commonly featured in high performance organic materials, including carbazole, thiophene, propylenedioxythiophene (ProDOT), diketopyrrolopyrrole (DPP), and isoindigo. Copolymerizations can be carried out using monomer mixtures, and monoazide chain stoppers can be used to install well-defined end groups. Azopolymers possess unique properties owing to the functionality of the azo linkages. For example, protonation at nitrogen results in LUMO lowering and red-shifted absorption bands. Additionally, N=N bonds possess low-lying π* levels, allowing azopolymers to be reversibly reduced under mild conditions.

Pairing Suzuki–Miyaura cross-coupling and catalyst transfer polymerization

Borylation strategies to make AB Suzuki–Miyaura monomers for use in catalyst-transfer polymerization with nickel or palladium catalysts.

Chain-Growth Polymerization of Benzotriazole Using Suzuki-Miyaura Cross-Coupling and Dialkylbiarylphosphine Palladium Catalysts

Electron-deficient (n-type) conjugated materials are commonly prepared via step-growth methods with limited control over the molecular weight and molecular weight distribution of the resulting polymers. In this communication, we demonstrate that Pd-dialkylbiarylphosphine catalysts enable the chain-growth polymerization of benzo[1,2,3]triazole using Suzuki-Miyaura coupling with molecular weight control and modest molecular weight distributions (Đ ∼ 1.2-1.6). The importance of a free ligand in the reaction mixture during polymerization was established by analysis of polymer samples using GPC and MALDI-TOF mass spectrometry. A block copolymer with poly(3-hexylthiophene) was also synthesized by sequential monomer addition. The success of these commercially available catalysts for polymerization of benzotriazole highlights their potential for chain-growth reactions with other bicyclic arenes in the future.

Isolation of Living Conjugated Polymer Chains

Living polymerizations currently play a central role in polymer chemistry. However, one feature of these polymerizations is often overlooked, namely, the isolation of living polymer chains. Herein we report the isolation of living π-conjugated polymer chains, synthesized by catalyst-transfer polycondensation. Successful preservation of the nickel complex at polymer chain ends is evidenced by nuclear magnetic resonance spectroscopy, end group analysis, and chain extension experiments. When characterizing living chains by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, we discovered a unique photoionization-photodissociation fragmentation process for polymers containing a nickel phosphine end group. Living chains are isolated for several types of conjugated polymers as well as discrete living oligomers. Additionally, we are able to recycle the catalysts from the isolated polymer chains. Catalyst recycling after π-conjugated polymerization has previously been impossible without chain isolation. This strategy not only exhibits general applicability to different monomers but also has far-reaching potential for other catalytic systems.

Photocontrolled Synthesis of n-Type Conjugated Polymers

Current approaches to synthesize π-conjugated polymers (CPs) are dominated by thermally driven, transition-metal-mediated reactions. Herein we show that electron-deficient Grignard monomers readily polymerize under visible-light irradiation at room temperature in the absence of a catalyst. The product distribution can be tuned by the wavelength of irradiation based on the absorption of the polymer. Conversion studies are consistent with an uncontrolled chain-growth process; correspondingly, chain extension produces all-conjugated n-type block copolymers. Preliminary results demonstrate that the polymerization can be expanded to donor-acceptor alternating copolymers. We anticipate that this method can serve as a platform to access new architectures of n-type CPs without the need for transition-metal catalysis.

All-conjugated donor–acceptor block copolymers featuring a pentafulvenyl-polyisocyanide-acceptor

A fulvenyl-functionalized polyisocyanide (PIC2) with a high electron mobility of μ_e = 10⁻² cm² V⁻¹ s⁻¹ has been incorporated into donor–acceptor block copolymers. Their self-assembly and bulk-morphology have been studied, and potential device applications have been explored.

The Importance of Ligand-Induced Backdonation in the Stabilization of Square Planar d10 Nickel π-Complexes

The electronic nature of Ni π-complexes is underexplored even though these complexes have been widely postulated as intermediates in organometallic chemistry. Herein, the geometric and electronic structure of a series of nickel π-complexes, Ni(dtbpe)(X) (dtbpe=1,2-bis(di-tert-butyl)phosphinoethane; X=alkene or carbonyl containing π-ligands), is probed using a combination of ³¹ P NMR, Ni K-edge XAS, Ni K_β XES, and DFT calculations. These complexes are best described as square planar d¹⁰ complexes with π-backbonding acting as the dominant contributor to M-L bonding to the π-ligand. The degree of backbonding correlates with ² J_PP from NMR and the energy of the Ni 1s→4p_z pre-edge in the Ni K-edge XAS data, and is determined by the energy of the π*_ip ligand acceptor orbital. Thus, unactivated olefinic ligands tend to be poor π-acids whereas ketones, aldehydes, and esters allow for greater backbonding. However, backbonding is still significant even in cases in which metal contributions are minor. In such cases, backbonding is dominated by charge donation from the diphosphine, which allows for strong backdonation, although the metal centre retains a formal d¹⁰ electronic configuration. This ligand-induced backbonding can be formally described as a 3-centre-4-electron (3c-4e) interaction, in which the nickel centre mediates charge transfer from the phosphine σ-donors to the π*_ip ligand acceptor orbital. The implications of this bonding motif are described with respect to both structure and reactivity.

Catalyst-transfer polymerization of arylamines by the Buchwald–Hartwig cross-coupling

The control over the polymerization course of arylamines by the Buchwald–Hartwig reaction was achieved by the introduction of suitable functional groups onto the AB-type monomer.

The role of halogens in the catalyst transfer polycondensation for π-conjugated polymers

Catalyst transfer polycondensation is the only method to prepare π-conjugated polymers in a chain-growth manner, yet several aspects that underlie this polymerization are not fully understood. Here, we investigate the nickel-catalyzed polymerization mechanisms of a series of thiophene monomers bearing different halogen functionalities (Cl, Br, I). We have discovered the significant role that halogens and magnesium salts play in this polymerization. More specifically, the catalyst resting state changes depending on the type of halogenated monomer. For chlorinated monomers a mixture of Ni(ii)-dithienyl and dissociated Ni(phosphine) complexes are the resting states, which results in uncontrolled polymerization. For brominated monomers, a Ni(ii)-dithienyl complex is the resting state, which leads to controlled polymerization. For iodinated monomers, a Ni(ii)-thienyl iodide complex is the resting state, and notable inhibition by magnesium salt by-products is observed. The catalyst resting state changes to a Ni(ii)-dithienyl complex when a turbo Grignard reagent (i-PrMgCl·LiCl) is used. These findings are used to guide the design of a new monomer, 2-bromo-3-(2-ethylhexyl)-5-iodotellurophene, which enables the first controlled polymerization of a tellurophene monomer containing a sterically encumbered 2-ethylhexyl side chain. These insights are crucial for deepening the mechanistic understanding of Kumada cross coupling reactions and the controlled synthesis of π-conjugated polymers.

Identifying the missing link in catalyst transfer polymerization

Nickel-catalyzed catalyst transfer polycondensation (CTP) of thiophenes is an efficient strategy for the controlled synthesis of polythiophenes. However, a detailed view of its reaction mechanism has remained elusive with unresolved questions regarding the geometry and bonding of critical Ni(0) thiophene intermediates. Herein, we provide experimental and computational evidence of structurally characterized square planar η2-Ni(0)-thiophene species and their relevance to the mechanism of CTP. These results confirm the viability of C,C-η2 bound intermediates in CTP of thiophenes, providing an electronic rationale for the stability of such species, and thus that such processes can proceed as living polymerizations. We further show that C,S-κ2 species may also be relevant in nickel-catalyzed CTP of thiophenes, providing new avenues for exploitation and optimization.

NHC Pd(II) and Ag(I) Complexes: Synthesis, Structure, and Catalytic Activity in Three Types of C-C Coupling Reactions

Four bis-benzimidazolium salts, 1,4-bis[1'-(N-R-benzimidazoliumyl)methyl]-2,3,5,6-tetramethylbenzene 2X- (L 1 H 2 ·(PF 6 ) 2 : R = ethyl, X = PF6; L 2 H 2 ·Br 2 : R = picolyl, X = Br; L 3 H 2 ·Br 2 : R = benzyl, X = Br; and L 4 H 2 ·Br 2 : R = allyl, X = Br), and their three N-heterocyclic carbene (NHC) Pd(II) and Ag(I) complexes, L 1 Pd 2 Cl 4 (1), L 2 Ag 2 Br 2 (2), and L 4 (AgBr) 2 (3), as well as one anionic complex L 3 H 2 ·(Ag 4 Br 8 ) 0.5 (4), have been synthesized and characterized. Complex 1 adopts a funnel-like type of structure, complex 2 adopts a cyclic structure, and complex 3 is an open structure. In the crystal packing of 1-4, one-dimensional polymeric chains and two-dimensional supramolecular layers are formed via intermolecular weak interactions, including hydrogen bonds, π-π interactions, and C-H···π contacts. The catalytic activities of NHC Pd(II) complex 1 in three types of C-C coupling reactions (Suzuki-Miyaura, Heck-Mizoroki, and Sonogashira reactions) were studied. The results show that this catalytic system is efficient for these C-C coupling reactions.

Transition-metal-free and halogen-free controlled synthesis of poly(3-alkylthienylene vinylene) via the Horner–Wadsworth–Emmons condensation reaction

Controlled polymerization without a transition metal or halogen.

Controlled synthesis of ortho, para-alternating linked polyarenes via catalyst-transfer Suzuki coupling polymerization

A novel class of ortho, para-alternating linked polyarenes is synthesized via catalyst-transfer Suzuki coupling polymerization with Pd₂(dba)₃/t-Bu₃P/p-BrC₆H₄COPh as initiator.

Balancing steric and electronic effects of bidentate, mixed P,N ligands to control Kumada catalyst transfer polycondensation of a sterically hindered thiophene

Screening various P,N ligands to control KCTP of a sterically hindered thiophene reveals an oxazoline-based ligand most effective.

Advances toward the effective use of block copolymers as organic photovoltaic active layers

Donor/acceptor block copolymers for organic photovoltaic active layers are discussed from first principles through the modern state-of-the-art and future perspectives.

Controlled Pd(0)/Ad3P-Catalyzed Suzuki Cross-Coupling Polymerization of AB-Type Monomers with Ad3P-Coordinated Acetanilide-Based Palladacycle Complex as Initiator

Controlled Pd(0)-catalyzed Suzuki cross-coupling polymerizations of AB-type monomers with tris(1-adamantyl)phosphine (Ad₃P) as the ligand was described. Ad₃P-coordinated acetanilide-based palladacycle complex (1) was demonstrated to be an efficient initiator for controlled Suzuki cross-coupling polymerization, affording polymers with narrow Đs and well-controlled end groups. Our study provided an efficient ligand and an efficient initiator for controlled Suzuki cross-coupling polymerizations.

Impact of Precatalyst Activation on Suzuki-Miyaura Catalyst-Transfer Polymerizations: New Mechanistic Scenarios for Pre-transmetalation Events

The relevance of L_nPdX₂ precatalyst activation on the Suzuki-Miyaura reaction course was investigated in the case of catalyst-transfer polymerizations. A catalytic study, backed up by theoretical calculations, allowed to ascertain the coexistence of a neutral and an anionic mechanistic pathways in the precatalyst activation, in which the bulky ^tBu₃P external ligand plays a crucial role. The fine-tuning of the catalytic conditions can steer the activation step toward the anionic pathway, leading to the full control over the polymerization course. While providing insights and perspectives into the catalyst-transfer polymerizations, these results uncover unexplored scenarios for the pre-transmetalation events of Suzuki-Miyaura reactions contributing to its full understanding.