Gold Nanoparticles Photosensitization towards 3,4,9,10-Perylenetetracarboxylic Dianhydride Integrated with a Dual-Particle Three-Dimensional DNA Roller: A General "ON-OFF-ON" Photoelectric Plasmon-Enhanced Biosensor

Multipath collaboration-based signal amplification on Z-scheme In2O3/g-C3N4 heterojunction photoelectrode for sensitive photoelectrochemical immunoassay

The ideal photoelectrode and efficient signaling strategy are pivotal to achieve sensitive photoelectrochemical (PEC) analysis. Here, a multipath collaborative signal amplification-based PEC immunosensor was constructed for the ultrasensitive detection of cytokeratin 19 fragment 21-1. Specifically, the photoelectrode fabricated by Z-scheme In2O3/g-C3N4 heterojunction showed enhanced photocurrent intensity in response to visible light. Meanwhile, the signal probe, horseradish peroxidase functionalized dopamine-melanin nanosphere@Au nanoparticles (HRP-Dpa-melanin NS@AuNPs), were introduced into the system. When the target exists, the signal probe can induce multiple quenching of the photocurrent due to the competition of light absorption, steric hindrance and HRP-mediated biocatalytic precipitation, which effectively inhibit light, electron donor, and electron access to the photoelectrode. The fabricated immunosensor exhibits a wide linear range from 1.0 × 10-3 - 1.0 × 102 ng mL-1 with the detection limit of 0.35 pg mL-1 (S/N = 3) for cytokeratin 19 fragment 21-1 detection. The study enhances sensitivity for PEC detection by utilizing the superior Z-scheme heterojunction photoelectrode, providing a valuable method that combines multiple signal pathways for a synergistic effect in bioanalysis.

Dual-sensitized heterojunction Ag2S/ZnS/NiS composites with entire visible-light region absorption for ultrasensitive photoelectrochemical detection of tobramycin

In this study, an ultrasensitive photoelectrochemical (PEC) aptasensor based on dual-sensitized heterojunction Ag2S/ZnS/NiS composites as a signal probe was proposed for the detection of tobramycin (TOB) by combining a cascaded quadratic signal amplification strategy. Specifically, compared to the limited visible light-harvesting capability of single sensitized composites, Ag2S/ZnS/NiS composites with p-n and n-n heterojunction could greatly improve the light energy utilization to tremendously strengthen the optical absorption in the entire visible-light region. Moreover, dual-sensitized heterojunction could effectively hinder the rapid recombination of photoelectrons and holes (carriers) to obtain a good photocurrent for improving the sensitivity of the aptasensor. Furthermore, a cascaded quadratic signal amplification strategy was applied to convert trace target TOB into plentiful gold nanoclusters (Au NCs) labelled double-stranded DNA for the construction of PEC aptasensor, with a broad linear detection range from 0.01 to 100 ng mL-1 and a low detection limit of 3.38 pg mL-1. Importantly, this study provided a versatile and sensitive PEC biosensing platform for TOB analysis, and demonstrated its successful application for TOB detection in milk samples. This protocol provides a novel dual-sensitized heterojunction composites to develop a highly efficient and harmfulless PEC aptasensor, which is expected to be used in food safety, environmental monitoring and other areas.

2D Z-scheme ZnIn2S4/g-C3N4 heterojunction based on photoelectrochemical immunosensor with enhanced carrier separation for sensitive detection of CEA

Semiconducting materials based on photoelectrochemical (PEC) sensors have been widely utilized for detection. Meanwhile, the sensitivity of the PEC sensor was limited by low-efficiency carrier separation. Thus, a novel sandwich-type PEC bioimmunosensing based on 2D Z-scheme ZnIn2S4/g-C3N4 heterojunction as a photosensitive material and BiVO4 as a photoquencher was designed for the sensitive detection of carcinoembryonic antigen (CEA). Firstly, the 2D ZnIn2S4/g-C3N4 structure provided a multitude of activated sites which facilitated the loading of the capture antibody (Ab1). Secondly, the Z-scheme heterojunction had a high redox capacity while promoting the rapid separation and migration of photogenerated electron-hole pairs (e-/h+). Thus it was able to consume more electron donors to a certain extent, resulting in a higher initial photocurrent. In addition, BiVO4 with large spatial potential resistance was introduced for the first time to realize signal amplification. BiVO4 could not only compete with substrate materials for electron donors, but also effectively prevent electron donors from contacting the substrate, further reducing the photocurrent signal. Under optimized conditions, the sensor had a favorable detection range (0.0001-100 ng/mL) to CEA and a low detection limit of 0.03 pg/mL. With high specificity, excellent stability, and remarkable reproducibility, this sensor provided a new perspective for constructing accurate and convenient PEC immunosensor for bioanalysis and early disease diagnosisdisease diagnosis.

Strand displacement amplification triggered 3D DNA roller assisted CRISPR/Cas12a electrochemiluminescence cascaded signal amplification for sensitive detection of Ec-16S rDNA

BACKGROUND

Escherichia coli can cause gastrointestinal infection, urinary tract infection and other infectious diseases. Accurate detection of Escherichia coli 16S rDNA (Ec-16S rDNA) in clinical practice is of great significance for the identification and treatment of related diseases. At present, there are various types of sensors that can achieve accurate detection of Ec-16S rDNA. Electrochemiluminescence (ECL) has attracted considerable attention from researchers, which causes excellent performance in bioanalysis. Based on the previous research, it is significance to develop a novel, sensitive and efficient ECL biosensor.

RESULTS

In this work, an ECL biosensor for the detection of Ec-16S rDNA was constructed by integrating CRISPR/Cas12a technology with the cascade signal amplification strategy consisting of strand displacement amplification (SDA) and dual-particle three-dimensional (3D) DNA rollers. The amplification products of SDA triggered the operation of the DNA rollers, and the products generated by the DNA rollers activated CRISPR/Cas12a to cleave the signal probe, thereby realizing the change of the ECL signal. The cascade amplification strategy realized the exponential amplification of the target signal and greatly improved the sensitivity. Manganese dioxide nanoflowers (MnO2 NFs) as a co-reaction promoter effectively enhanced the ECL intensity of tin disulfide quantum dots (SnS2 QDs). A new ternary ECL system (SnS2 QDs/S2O82-/MnO2 NFs) was prepared, which made the change of ECL intensity of biosensor more significant. The proposed biosensor had a response range of 100 aM-10 nM and a detection limit of 27.29 aM (S/N = 3).

SIGNIFICANCE AND NOVELTY

Herein, the cascade signal amplification strategy formed by SDA and dual-particle 3D DNA rollers enabled the ECL biosensor to have high sensitivity and low detection limit. At the same time, the cascade signal amplification strategy was integrated with CRISPR/Cas12a to enable the biosensor to efficiently detect the target. It can provide a new idea for the detection of Ec-16S rDNA in disease diagnosis and clinical analysis.

Exonuclease-catalyzed recycling and annular four-footed DNA walking amplification-assisted "on-off-super on" signal transitions for photoelectrochemical biosensing of kanamycin

Photoelectrochemical (PEC) biosensors have exhibited a promising potential for assays of a large variety of analytes; however, how to realize their low background-based "super on" signal output is still a great challenge. Herein, we report a novel multiple nucleic acid amplification-assisted "on-off-super on" signal transition mechanism for the PEC biosensing of kanamycin antibiotics. The biosensing platform was constructed on a perylene-3,4,9,10-tetracarboxylic dianhydride-based photoelectrode, and its strong photocurrent could be well inhibited by an anchored ferrocene (Fc)-labeled hairpin DNA to produce a low background signal. Two target biorecognition-triggered exonuclease III-catalytic reactions were adopted to produce an annular four-footed DNA walker (AFW) and a methylene blue (MB)-labeled DNA strand. By using their synergistic effect to release Fc quenchers and simultaneously capture MB sensitizers, a "super on" signal output was realized. As a result, a very wide linear range from 10 fg mL-1 to 10 ng mL-1 and an ultra-low detection limit of 7.8 fg mL-1 were obtained. Meanwhile, the aptamer recognition-based homogeneous reaction and AFW-based multiple nucleic acid amplification effectively simplified the assay manipulation and well ensured the repeatability of the method. The satisfactory sample experiment results indicated its good reliability and accuracy for the antibiotic residue analysis application.

Efficient sensitization of CdTe QDs towards PTCDA for sensitive photoelectrochemical Hg2+ assay

Herein, a sensitive photoelectrochemical (PEC) biosensor was designed for the detection of mercury ions (Hg2+) on the basis of the efficient sensitization of cadmium telluride quantum dots (CdTe QDs) towards 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) and the significant quenching ability of a thymine-Hg2+-thymine (T-Hg2+-T) structure. The proposed CdTe QD/PTCDA sensitized structure was successfully constructed via continuous incubation of PTCDA and CdTe QDs on the glassy carbon electrode (GCE) interface, which embraced strong light absorption capacity and high carrier separation efficiency, giving rise to a remarkably improved initial photocurrent response. Notably, the PEC signal generated from the CdTe QD/PTCDA sensitized structure was almost fivefold higher than that of PTCDA owing to the efficient sensitization of CdTe QDs towards PTCDA. Once target Hg2+ ions were added, a T-rich S1 strand modified on the surface of 1-hexanethiol (HT)/S1/gold nanoparticles (Au NPs)/CdTe QDs/PTCDA/GCE immediately reacted with Hg2+ to produce multiple stable T-Hg2+-T structures. Therefore, the initial PEC signal would be considerably quenched by a high steric hindrance effect derived from the T-Hg2+-T structures. As a result, a quenched PEC response could achieve the detection of Hg2+ in concentrations ranging from 100 fM to 1000 nM. More importantly, the combination of the CdTe QDs/PTCDA sensitization structure and the T-Hg2+-T structure paves a promising pathway to developing a novel PEC biosensing platform for Hg2+ detection and also provides a favorable strategy for monitoring environmental pollution related to Hg2+.

Ultrasensitive MicroRNA Photoelectric Assay Based on a Mimosa-like CdS-NiS/Au Schottky Junction

Seeking and constructing superior photoactive materials have the potential to improve the performance of photoelectrochemical (PEC) biosensors. In this work, we proposed a novel mimosa-like ternary inorganic composite with a significantly enhanced light-harvesting ability and photogenerated carrier separation rate. This ternary photoactive material was obtained via electrodeposition of gold nanoparticles (Au) on the surface of transition metal sulfide composite of CdS and NiS (CdS-NiS/Au). The experimental results showed that the high initial photocurrent was acquired on CdS-NiS/Au (68-fold higher than that of individual CdS) with the synergistic effect of p-n heterojunction, Schottky junction, and the eminent optical properties of gold nanoparticles. Meanwhile, using silver nanoclusters prepared by link DNA protection as an effective quencher, integrating the duplex-specific nuclease-assisted rolling circle amplification strategy, a "Signal ON" PEC biosensor was fabricated for the detection of microRNA 21 (miRNA 21). With the release of the quencher, the recovered photocurrent is able to achieve determination of miRNA 21 within the range from 10 aM to 1 pM with a detection limit down to 4.6 aM (3σ). Importantly, this work not only provides a superb idea for designing ternary inorganic heteromaterials with exceptional photoactive ability but also allows the detection of other biomarkers by selecting appropriate recognition units.

Dual cascade DNA walking-induced "super on" photocurrent response for constructing a novel antibiotic biosensing method

The construction of effective methods for the convenient testing of antibiotic residues in real samples has attracted considerable interest. Herein, we designed a dual cascade DNA walking amplification strategy and combined it with the controllable photocurrent regulation of a photoelectrode to develop a novel photoelectrochemical (PEC) biosensing method for antibiotic detection. The photoelectrode was prepared through the surface modification of a glassy carbon electrode with the TiO₂/CdS QDs nanocomposite synthesized by an in situ hydrothermal deposition method. The strong anodic PEC response of the nanocomposite could be well inhibited by the introduction of a silver nanoclusters (Ag NCs)-labeled DNA hairpin onto its surface. Upon the target biorecognition reaction, an Mg²⁺-dependent DNAzyme (MNAzyme)-driven DNA walking was triggered to release another MNAzyme strand-linked streptavidin (SA) complex. As this SA complex could serve as a four-legged DNA walker, its cascade walking on the electrode surface not only released Ag NCs but also caused the linking of Rhodamine 123 with the electrode to realize the "super on" photocurrent output. By using kanamycin as the model analyte, this method showed a very wide linear range from 10 fg mL^-1 to 1 ng mL^-1 and a very low detection limit of 0.53 fg mL^-1. Meanwhile, the simple photoelectrode preparation and the aptamer recognition-based autonomous DNA walking resulted in the convenient manipulation and excellent repeatability. These unique performances determine the great potential of the proposed method for practical applications.

Photoelectrochemical biosensor for DNA demethylase detection based on enzymatically induced double-stranded DNA digestion by endonuclease-exonuclease system and Bi4O5Br2-Au/CdS photoactive material

A novel photoelectrochemical (PEC) biosensor for the detection of DNA demethylase MBD2 was developed based on Bi₄O₅Br₂-Au/CdS photosensitive material. Bi₄O₅Br₂ was firstly modified with gold nanoparticles (AuNPs), following with the modification onto the ITO electrode with CdS to realize the strong photocurrent response as a result of AuNPs had good conductibility and the matched energy between CdS and Bi₄O₅Br₂. In the presence of MBD2, double-stranded DNA (dsDNA) on the electrode surface was demethylated, which triggered the digestion activity of endonuclease HpaII to cleave dsDNA and induced the further cleavage of the dsDNA fragment by exonuclease III (Exo III), causing the release of biotin labeled dsDNA and inhibiting the immobilization of streptavidin (SA) onto the electrode surface. As a results, the photocurrent was increased greatly. However, in the absence of MBD2, HpaII digestion activity was inhibited by DNA methylation modification, which further caused the failure in the release of biotin, leading to the successful immobilization of SA onto the electrode to realize a low photocurrent. The sensor had a detection of 0.3-200 ng/mL and a detection limit was 0.09 ng/mL (3σ). The applicability of this PEC strategy was assessed by studying the effect of environmental pollutants on MBD2 activity.

Schottky-functionalized Z-scheme heterojunction: Improved photoelectric conversion efficiency and immunosensing

Designing photovoltaic materials with good photoelectric activity is the crucial to boost the sensitivity of photoelectrochemical (PEC) biosensors. To meet this concern, a Schottky-functionalized direct Z-scheme heterojunction photovoltaic material was proposed by electrodeposition of gold nanoparticles on two kinds of bismuth oxyhalide composites surface (bismuth oxybromide and bismuth oxyiodide with different but matched band gaps) (depAu/BiOI/BiOBr). Specifically, synergistic effect was achieved through the direct Z-scheme heterojunction formed by BiOBr and BiOI as well as the gold Schottky junction, resulting in the enhanced light harvest and photoelectric conversion efficiency. Meanwhile, combined with sandwich immunotechnology, a "signal-off" PEC biosensor was fabricated for highly sensitive detection of carcinoembryonic antigen (CEA). In which, using depAu/BiOI/BiOBr modified glassy carbon electrodes both as the photoactive sensing interface and capture antibody loading matrix, polyethyleneimine copper complex encapsulated gold nanoclusters labeled detection antibody (Ab₂-Au@PEI-Cu) as the quencher, the photocurrent decreased with the increasing target CEA introduced by sandwich immune reaction. The proposed smart PEC immunoassay platform exhibited a wide detection range (1.0 fg/mL-2.0 ng/mL) and a detection limit as low as 0.11 fg/mL with favorable selectivity and stability. In addition, this PEC sensing strategy can be easily extended for other tumor marker analysis, which offers a new perspective of using multiple bismuth oxyhalide as photoactive materials for early diseases diagnosis.

Novel Aggregation-Enhanced PEC Photosensitizer Based on Electrostatic Linkage of Ionic Liquid with Protoporphyrin IX for Ultrasensitive Detection of Molt-4 Cells

Nowadays, aggregation quenching of most organic photosensitizers in aqueous media seriously restricts analytical and biomedical applications of photoelectrochemical (PEC) sensors. In this work, an aggregation-enhanced PEC photosensitizer was prepared by electrostatically bonding protoporphyrin IX (PPIX) with an ionic liquid of 1-butyl-3-methylimidazole tetrafluoroborate ([BMIm][BF₄]), termed as PPIX-[BMIm] for clarity. The resultant PPIX-[BMIm] showed weak photocurrent in pure dimethyl sulfoxide (DMSO, good solvent), while the PEC signals displayed a 44.1-fold enhancement in a water (poor solvent)/DMSO binary solvent with a water fraction (f_w) of 90%. Such PEC-enhanced mechanism was critically studied by electrochemistry and density functional theory (DFT) calculation in some detail. Afterward, a label-free PEC cytosensor was built for ultrasensitive bioassay of acute lymphoblastic leukemia (molt-4) cells by electrodepositing Au nanoparticles (Au NPs) on the PPIX-[BMIm] aggregates and sequential assembly of protein tyrosine kinase (PTK) aptamer DNA (aptDNA). The resultant cytosensor showed a wide linear range (300 to 3 × 10⁵ cells mL^-1) with a limit of detection (LOD) as low as 63 cells mL^-1. The aggregation-enhanced PEC performance offers a valuable and practical pathway for synthesis of advanced organic photosensitizer to explore its PEC applications in early diagnosis of tumors.