Multifunctionalized Covalent Organic Frameworks for Broad-Spectrum Extraction and Ultrasensitive Analysis of Per- and Polyfluoroalkyl Substances

Unlocking Enhanced Detection of Perfluoroalkanesulfonic Acids via Fluorinated Nonpolar 3D Covalent Organic Frameworks-Based Ambient Probe Nanoelectrospray Ionization Mass Spectrometry

The trace levels and severe matrix interferences greatly limited the determination of stable, persistent, and long-range-transported perfluoroalkanesulfonic acids (PFSAs) in complex environments. Here, we design and prepare the first fluorinated nonpolar 3D COF (TFPM-Pa-CF3) as an adsorbent, consisting of tetrakis(4-formylphenyl)methane (TFPM) and 2,5-diaminobenzo-trifluoride (Pa-CF3) for adsorption and extraction of PFSAs. The proposed TFPM-Pa-CF3 demonstrates excellent adsorption capacity (509.1 mg g-1) and rapid adsorption kinetics (5 min) for PFSAs attributed to the synergistic effects of F-F, hydrophobic, and electrostatic interactions. Furthermore, TFPM-Pa-CF3 is grown in situ on a stainless needle and coupled with ambient probe nanoelectrospray ionization mass spectrometry (PESI-MS) to develop a rapid and direct determination method with a low limit of detection (0.05-0.86 ng L-1) and wide linear range (1-10,000 ng L-1) for trace perfluorooctanesulfonate and its alternatives in environmental soil, algae and water. This work unlocks the efficient determination or removal of PFSAs in a complex environment, facilitating the solution of critical environmental PFSAs problems.

Diffusion/Modulator Dual-Mediated Solid-Liquid/Vapor Interfacial Synthesis of Crystalline Covalent Organic Framework Membranes

Constructing oriented crystalline covalent organic framework (COF) membranes with controllable thickness for water purification is highly desirable. Herein, we present a simple and universal protocol to prepare high-quality COF membranes on the inner wall of a glass vessel using a diffusion/modulator dual-mediated solid-liquid/vapor interfacial synthesis strategy. By meticulous control of solvent and temperature, a thin supersaturated spreading liquid layer was formed on the glass wall surface and served as a confined microreactor for incubating crystal nuclei. This induced the aniline-modulated solid-liquid/vapor interfacial exchange reaction and upward growth of a highly ordered COF membrane. The experiments and theoretical simulations revealed the underlying mechanisms of solid-liquid/vapor interfacial nucleation, growth and crystallization. Using this strategy, we created 13 types of new, free-standing, imine-linked COF membranes with exceptional performances in crystallinity, porosity, stability, processability and adsorption capacity. As an application demonstration, a COF membrane-filled filter was coupled with high-performance liquid chromatography system for the automated removal of multitarget liquid-crystal monomers in real water samples (removal efficiency≥96 %). This study enriches the synthesis toolboxes of COF membranes and broadens their application scopes.

Simultaneous Enrichment and Ultrasensitive Detection of Angiotensin I, II, and III and Aldosterone in Human Plasma Based on Magnetic Covalent Organic Frameworks and LC-MS/MS

Angiotensin I, II, and III (Ang I, II, and III) and aldosterone (Aldo) play an important role in primary aldosteronism (PA) screening according to the study of the blood pressure regulation mechanism. However, Ang I, Ang II, Ang III, and Aldo are present in human plasma at low concentrations and have different polarities, which make it rather challenging for current detection methods to simultaneously detect four analytes in complex blood samples. In this study, a new magnetic covalent organic framework (COF) was synthesized for the enrichment of Ang I, II, and III and Aldo in human plasma, and a new method for the simultaneous detection of four analytes was developed based on the magnetic COF and liquid chromatography-tandem mass spectrometry (LC-MS/MS). The experimental results demonstrated that the adsorption kinetics of the material conformed to a pseudo-second-order model, and the enrichment mechanisms were π-π stacking, electrostatic, and hydrogen bonding interactions. Under the optimized conditions, the established method has satisfactory linear ranges (Ang I: 100-25,000 pg/mL, Ang II: 2-500 pg/mL, Ang III: 3-750 pg/mL, and Aldo: 20-5000 pg/mL), a low limit of detection (0.8-5 pg/mL), high recoveries (93.0-111.3%), and multiple recycling, which were superior to those reported studies. Meanwhile, the results of testing 20 clinical samples indicated that Ang I, Ang II, Ang III, and Aldo were effective and could be used as new biomarkers for PA screening, which proved the feasibility of enriching the four targets in real blood samples. The prepared magnetic COF in this experiment provided a reference for the material design to simultaneous enrichment of Ang I, Ang II, Ang III, and Aldo, and the developed new method based on the magnetic COF and LC-MS/MS provided a new detection idea for PA screening, which greatly promoted the development of PA disease diagnosis and was expected to be used in further clinical research.

Magnetic fluorinated mesoporous metal-organic frameworks for rapid derivatization-assisted GC-MS analysis of perfluoroalkyl carboxylic acids in harsh water environment

A novel magnetic mesoporous fluorinated metal-organic framework material (Fe3O4@MIP-206-F) has been synthesized specifically for application as an adsorbent for perfluoroalkyl carboxylic acids (PFCAs) extraction by magnetic solid-phase extraction (MSPE). The carefully designed Fe3O4@MIP-206-F material features an appropriate porosity, open metal sites of Zr, and functional groups (fluorine and amino) conducive to the adsorption process. The distinctive architecture of the material endows it with exceptional extraction capabilities for PFCAs. Adsorption mechanisms encompass acid-base interactions, hydrophobic interactions, F-F interactions, electrostatic interactions, and size complementarity. Optimization of key parameters has significantly improved the extraction efficiency of MSPE. When coupled with gas chromatography-mass spectrometry (GC-MS), MSPE offers rapid and highly sensitive analysis of PFCAs. The method demonstrates wide linear range (0.050-50 ng mL-1), low detection limits (0.0010-0.0019 ng mL-1), good recoveries (86.7 % to 111 %), and exceptional intra- and inter-day precision. This approach accurately quantifies PFCAs in lake water and groundwater samples, enabling precise assessment of environmental contamination levels and supporting targeted remediation efforts.

In situ growth of hierarchical porous covalent organic framework coating for enhanced solid-phase microextraction of phenolic compounds

Covalent organic frameworks (COFs), when utilized as solid-phase microextraction (SPME) coating materials, exhibit remarkable abilities to concentrate phenols by thousands-fold owing to their vast surface area and exceptional stability. However, the prevalent micropores inherent in COFs can impede rapid mass transfer of target molecules, prolonging SPME extraction times. To addresses this limitation, this work introduces a novel approach by integrating hierarchical porous structures into COFs, leveraging polystyrene microspheres as hard templates during the in situ growth process of the SPME coating. Due to the presence of a hierarchical porous structure derived from the template, the resulting hierarchical porous TpBD coating, termed HP-TpBD, demonstrated enhanced extraction efficiency, accelerated extraction kinetics, and notably shortened extraction times for phenolic compounds. Coupled with gas chromatography-mass spectrometry, a highly sensitive method featuring a low limit of detection (0.20-0.28 ng L-1), a broad linear range (1.0∼1.0 × 104 ng L-1), and excellent precision (RSD < 8.5 %) was established. This methodology enables accurate quantitative analysis of phenols in water and soil samples. This work provides valuable insights into developing COF-based SPME coatings for the efficient extraction of volatile contaminants, paving the way for more efficient and sensitive analytical procedures.

Room-temperature synthesis of fluorinated covalent organic framework coupled with liquid chromatography-mass spectrometry for determination of per- and polyfluoroalkyl substances in drinking water

The routine monitoring of per- and polyfluoroalkyl substances (PFASs) in drinking water has become an important task in the field of public health. In this study, a fluorinated covalent organic framework (COF) was synthesized at room temperature using tetra-(4-aminophenyl) methane (TAM) and 2,3,5, 6-tetrafluoro-terephthalal (TFTA) as building blocks and named as TAM-TFTA-COF. The adsorption characteristics of PFASs on the TAM-TFTA-COF were investigated through adsorption model-fitting and molecular calculation. The TAM-TFTA-COF was served as the solid phase extraction (SPE) cartridge packing for the enrichment of PFASs. Combined with liquid chromatography-tandem mass spectrometry, the proposed method showed good linearity in the range of 1.25-375 ng·L-1, low limits of detection (0.03-0.24 ng·L-1), and excellent intraday and interday precisions with RSD <10.3 %. Furthermore, this analytical method can be utilized for the determination of PFASs in tap water, spring water, and lake water with satisfactory accuracy.

Constructing perfluorinated UiO-67 for enrichment of polycyclic aromatic hydrocarbons in seawater and seabed sediments

To investigate the ocean contamination caused by polycyclic aromatic hydrocarbons (PAHs), UiO-67/perfluorooctanoic acid (UiO-67/PFOA) was synthesized through solvent-assisted ligand incorporation method. The UiO-67/PFOA was then served as an adsorbent in headspace solid-phase microextraction (HS-SPME) technology for collecting and concentrating trace PAHs. The addition of the PFOA improved the hydrophobicity and stability of the UiO-67/PFOA coating, and the C-F functional group in UiO-67/PFOA could form the pseudo hydrogen bonding with the CH on the benzene ring of PAHs, which endowed the UiO-67/PFOA with 1.60-4.63 times enrichment performance for PAHs than UiO-67. Under optimal conditions, the wide linear ranges of PAHs (0.01-20 ng·mL-1) with good coefficients of determination (R2 ≥ 0.9950) and low limits of detection (LODs, 0.003-0.008 ng·mL-1) were obtained. The recoveries of five PAHs from spiked seawater and seabed sediment by the developed method ranged from 81.14 % to 116.0 % with satisfactory results. This work provided a good adsorbent for the enrichment of trace PAHs in complicated environments and a new approach for the subsequent synthesis of adsorbents with good enrichment performance.

Enzyme-Assisted Solid-Phase Microextraction Coupled with a DNA Nanowalker for Dual-Amplified Detection of Chloramphenicol in Animal-Derived Food Products

Chloramphenicol (CAP), an aminoalcohol antibiotic, exerts its action on bacterial ribosomes, thereby obstructing protein synthesis. However, the use of CAP in husbandry may lead to its excessive accumulation in animal-derived food products. This presents potential risks to consumer health. This study developed a novel dual-amplification fluorescence detection method by integrating enzyme-assisted solid-phase microextraction (SPME) with a Fe3O4@Au NP-based DNA nanowalker for the detection of CAP in food. The combination of a quartz rod-based SPME biosensor and DNA nanowalker effectively eliminated matrix interference, enabling the conversion of CAP and enhancement of detection signals through two cyclic amplification processes. The strategy demonstrated high sensitivity with a limit of detection of 28.1 aM as well as a wide linear range from 0.1 fM to 1 nM (with R2 > 0.99). This method also demonstrates robust stability and accuracy in detecting trace amounts of CAP in both authentic and prepared positive samples.

Advances in covalent organic frameworks for sample preparation

Sample preparation is crucial in analytical chemistry, impacting result accuracy, sensitivity, and reliability. Solid-phase separation media, especially adsorbents, are vital for preparing of liquid and gas samples, commonly analyzed by most analytical instruments. With the advancements in materials science, covalent organic frameworks (COFs) constructed through strong covalent bonds, have been increasingly employed in sample preparation in recent years. COFs have outstanding selectivity and/or excellent adsorption capacity for a single target or can selectively adsorb multiple targets from complex matrix, due to their large specific surface area, adjustable pore size, easy modification, and stable chemical properties. In this review, we summarize the classification of COFs, such as pristine COFs, COF composite particles, and COFs-based substrates. We aim to provide a comprehensive understanding of the different classifications of COFs in sample preparation within the last three years. The challenges and development trends of COFs in sample preparation are also presented.

High-Performance Piezoelectric Two-Dimensional Covalent Organic Frameworks

Organic piezoelectric nanogenerators (PENGs) are attractive in harvesting mechanical energy for various self-powering systems. However, their practical applications are severely restricted by their low output open circuit voltage. To address this issue, herein, we prepared two two-dimensional (2D) covalent organic frameworks (COFs, CityU-13 and CityU-14), functionalized with fluorinated alkyl chains for PENGs. The piezoelectricity of both COFs was evidenced by switchable polarization, characteristic butterfly amplitude loops, phase hysteresis loops, conspicuous surface potentials and high piezoelectric coefficient value (d33). The PENGs fabricated with COFs displayed highest output open circuit voltages (60 V for CityU-13 and 50 V for CityU-14) and delivered satisfactory short circuit current with an excellent stability of over 600 seconds. The superior open circuit voltages of CityU-13 and CityU-14 rank in top 1 and 2 among all reported organic materials-based PENGs.

Supramolecular Materials as Solid-Phase Microextraction Coatings in Environmental Analysis

Solid-phase microextraction (SPME) has been widely proposed for the extraction, clean-up, and preconcentration of analytes of environmental concern. Enrichment capabilities, preconcentration efficiency, sample throughput, and selectivity in extracting target compounds greatly depend on the materials used as SPME coatings. Supramolecular materials have emerged as promising porous coatings to be used for the extraction of target compounds due to their unique selectivity, three-dimensional framework, flexible design, and possibility to promote the interaction between the analytes and the coating by means of multiple oriented functional groups. The present review will cover the state of the art of the last 5 years related to SPME coatings based on metal organic frameworks (MOFs), covalent organic frameworks (COFs), and supramolecular macrocycles used for environmental applications.

Sensitive fluorescence detection based on dimeric G-quadruplex combined with enzyme-assisted solid-phase microextraction of streptomycin in honey

Streptomycin (STR), an aminoglycoside antibiotic with the potential to persist in honey and other food products, may induce allergy, toxicity and antibiotic resistance in humans. In this study, we developed a solid-phase microextraction (SPME) biosensor based on a quartz rod that was modified with double-stranded DNA structures consisting of partially complementary G-rich base DNA strand and STR aptamer. The STR isolated by SPME initially bound to the aptamer. Then the remaining double-stranded DNA structures were cleaved by the Nt.BstNBI enzyme, resulting in release of G-quadruplex dimers. The latter formed a complex with thioflain T fluorescent dye, resulting in an amplified fluorescence response. The method exhibited high sensitivity (a limit of detection of 10.84 pM), wide linear range (0.05 nM ∼ 500 nM (with determination coefficient > 0.99)), and simple operation, making it suitable and convenient for STR detection. Successful STR determination in genuine honey samples was demonstrated.

All-in-one strategy to construct bifunctional covalent triazine-based frameworks for simultaneous extraction of per- and polyfluoroalkyl substances and polychlorinated naphthalenes in foods

Per- and polyfluoroalkyl substances (PFASs) and polychlorinated naphthalenes (PCNs) are of growing concern due to their toxic effects on the environment and human health. There is an urgent need for strategies to monitor and analyze the coexistence of PFASs and PCNs, especially in food samples at trace levels, to ensure food safety. Herein, a novel β-cyclodextrin (β-CD) derived fluoro-functionalized covalent triazine-based frameworks named CD-F-CTF was firstly synthesized. This innovative framework effectively combines the porous nature of the covalent organic framework and the host-guest recognition property of β-CD enabling the simultaneous extraction of PFASs and PCNs. Under the optimal conditions, a simple and rapid method was developed to analyze PFASs and PCNs by solid-phase extraction (SPE) based simultaneous extraction and stepwise elution (SESE) strategy for the first time. When coupled with liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) and gas chromatography-tandem mass spectrometry (GC-MS/MS), this method achieved impressive detection limits for PFASs (0.020 -0.023 ng/g) and PCNs (0.016 -0.075 ng/g). Furthermore, the excellent performance was validated in food samples with recoveries of 76.7-107 % (for PFASs) and 78.0-108 % (for PCNs). This work not only provides a simple and rapid technique for simultaneous monitoring of PFASs and PCNs in food and environmental samples, but also introduces a new idea for the designing novel adsorbents with multiple recognition sites.

Recent progress of covalent organic frameworks as attractive materials for solid-phase microextraction: A review

Solid-phase microextraction (SPME) is a green, environmentally friendly, and efficient technique for sample pre-treatment. Covalent organic frameworks (COFs), a class of porous materials formed by covalent bonds, have gained prominence owing to their remarkable attributes, including large specific surface area, tunable pore size, and robust thermal/chemical stability. These characteristics have made COFs highly appealing as potential coatings for SPME fiber over the past decades. In this review, various methods used to prepare SPME coatings based on COFs are presented. These methods encompass physical adhesion, sol-gel processes, in situ growth, and chemical cross-linking strategies. In addition, the applications of COF-based SPME coating fibers for the preconcentration of various targets in environmental, food, and biological samples are summarized. Moreover, not only their advantages but also the challenges they pose in practical applications are highlighted. By shedding light on these aspects, this review aims to contribute to the continued development and utilization of COF materials in the field of sample pretreatment.

Green, mildly synthesized bismuth-based MOF for extraction of polar glucocorticoids in environmental water

The complex sample matrix and low environmental concentration make it challenging to effectively determine the polar glucocorticoids. In particular, a green, economical, and environmentally friendly method is urgently needed, since a large amount of extraction solvents, samples, and extraction materials have been commonly used to improve the sensitivity of the reported methods. In this study, a green and robust phenol and bismuth-based MOF of SU101 was mildly synthesized and fabricated as a brand new solid-phase microextraction (SPME) fiber. Only tiny amounts of SU101 and desorption solvents were employed to realize the high-efficiency enrichments of glucocorticoids from water samples. The detection performance of proposed SU101 fiber towards glucocorticoids was much superior to the single-component and multi-component commercial fibers. It indicated that SU101 fiber could be an excellent candidate for the enrichments of polar pharmaceuticals. After it was coupled with the instrument of high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS), the linear range of 5-10000 ng L-1 with detection limits low to 0.070-1.5 ng L-1 and satisfactory recoveries were achieved by the developed method. Benefiting from the environmental friendliness of SU101 and the less-solvent consumption of SPME technique, this work presented a green and economical strategy for determinations of trace glucocorticoids.

Molecularly imprinted polymer sheathed mesoporous silica tube as SPME fiber coating for determination of tobacco-specific nitrosamines in water

Tobacco-specific nitrosamines (TSNAs) are probably carcinogenic disinfection byproducts eliciting health risk concerns. The determination and surveillance of TSNAs in water is still cumbersome due to the lack of advanced sample preparation methods. Herein, we prepared a solid phase microextraction (SPME) fiber coated with the molecularly imprinted polymer (MIP) sheathed mesoporous silica tube (MST) composite material, and developed a highly efficient, selective, and sensitive method for the determination of five TSNAs in water. Benefiting from the TSNAs-specific recognition of MIP and the increased specific surface area derived from MST, the MIP@MST fiber exhibited excellent extraction performance for TSNAs, which was much superior to the commercially available SPME fibers. By coupling to high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), the outstanding analytical merits such as low method detection limits (ranging 0.1-6.7 ng L-1) and good reproducibility (intra-fiber and inter-fiber relative standard deviations ranging 4.1 %-11.6 % and 3.5 %-12.2 %, respectively) were achieved with the consumption of 8 mL water sample and 100 μL methanol solvent in 50 min. The feasibility of the SPME-HPLC-MS/MS method was demonstrated in tap water and chloraminated source water, with relative recoveries for the five TSNAs ranging from 85.2 % to 108.5 %. In result, none of the TSNAs were found in the tap water samples, while 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) and 4-(methylnitrosamino)-1-(3-pyridyl)-1-Butanol (NNAL) were detected in the chloraminated source water samples. The rapid and convenient SPME-HPLC-MS/MS method developed in this study offers a powerful tool for monitoring TSNAs in water.

Linkage Transformations in a Three-Dimensional Covalent Organic Framework for High-Capacity Adsorption of Perfluoroalkyl Substances

Despite their many advantages, covalent organic frameworks (COFs) built from three-dimensional monomers are synthetically difficult to functionalize. Herein, we provide a new synthetic approach to the functionalization of a three-dimensional covalent organic framework (COF-300) by using a series of solid-state linkage transformations. By reducing the imine linkages of the framework to amine linkages, we produced a more hydrolytically stable material and liberated a nucleophilic amino group, poised for further functionalization. We then treated the amine-linked COF with diverse electrophiles to generate a library of functionalized materials, which we tested for their ability to adsorb perfluoroalkyl substances (PFAS) from water. The framework functionalized with dimethylammonium groups, COF-300-dimethyl, adsorbed more than 250 mg of perfluorooctanoic acid (PFOA) per 1 g of COF, which represents an approximately 14,500-fold improvement over that of COF-300 and underscores the importance of electrostatic interactions to PFAS adsorption performance. This work provides a conceptually new approach to the design and synthesis of functional three-dimensional COFs.