Poly(ethylene glycol)-Modified Tapered-Slit Membrane Filter for Efficient Release of Captured Viable Circulating Tumor Cells

Hydrogel-based technologies in liquid biopsy for the detection of circulating clinical markers: challenges and prospects

Liquid biopsy, which promises noninvasive detection of tumor-derived material, has recently been highlighted because of its potential to lead us to an era of precision medicine. However, its development has encountered challenges owing to the extremely low frequency and low purity of circulating tumor markers, such as circulating tumor cells (CTCs), circulating exosomes, and circulating tumor nucleic acids (ctNAs). Much effort has been made to overcome this limitation over the last decade, and an increasing number of studies have shown interest in the special characteristics of hydrogels. This hydrophilic and biocompatible polymeric network, which absorbs a large amount of water, can aid in the isolation, protection, and analysis of these low-abundance and short-lived circulating biomarkers. The role of hydrogels in liquid biopsy is extensive and ranges from enrichment to encapsulation. This review provides an overview of hydrogel-based technologies to pave the way in liquid biopsy.

Optical nanomaterial-based detection of biomarkers in liquid biopsy

Liquid biopsy, which is a minimally invasive procedure as an alternative to tissue biopsy, has been introduced as a new diagnostic/prognostic measure. By screening disease-related markers from the blood or other biofluids, it promises early diagnosis, timely prognostication, and effective treatment of the diseases. However, there will be a long way until its realization due to its conceptual and practical challenges. The biomarkers detected by liquid biopsy, such as circulating tumor cell (CTC) and circulating tumor DNA (ctDNA), are extraordinarily rare and often obscured by an abundance of normal cellular components, necessitating ultra-sensitive and accurate detection methods for the advancement of liquid biopsy techniques. Optical biosensors based on nanomaterials open an important opportunity in liquid biopsy because of their enhanced sensing performance with simple and practical properties. In this review article, we summarized recent innovations in optical nanomaterials to demonstrate the sensitive detection of protein, peptide, ctDNA, miRNA, exosome, and CTCs. Each study prepares the optical nanomaterials with a tailored design to enhance the sensing performance and to meet the requirements of each biomarker. The unique optical characteristics of metallic nanoparticles (NPs), quantum dots, upconversion NPs, silica NPs, polymeric NPs, and carbon nanomaterials are exploited for sensitive detection mechanisms. These recent advances in liquid biopsy using optical nanomaterials give us an opportunity to overcome challenging issues and provide a resource for understanding the unknown characteristics of the biomarkers as well as the mechanism of the disease.

Ultrathin silicon nitride membrane with slit-shaped pores for high-performance separation of circulating tumor cells

In this study, we developed an ultrathin filtering membrane with slit-shaped pores which can achieve circulating tumor cell (CTC) separation from whole blood with high performance (high capture efficiency, high white blood cell (WBC) depletion, and high viability). The silicon nitride (Si₃N₄) filtering membrane was fabricated via the standard microfabrication technology, which can be easily scaled up to mass-production. 6 μm was determined as the optimum width of the filtering pores to better separate CTCs in whole blood, which can reach a high capture efficiency of ∼96%. Meanwhile, the filtering membrane with a high porosity of 34% demonstrated high WBC depletion (∼99.99%). Furthermore, the ultrathin (thickness: 200 nm) Si₃N₄ membrane facilitated the capture of CTCs with high viability (∼90%). Finally, the microfluidic chip was successfully applied to separate CTCs in whole blood samples from cancer patients and used for molecular examination. These results indicate that this microfluidic chip facilitates the clinical application of CTC-based liquid biopsy technology.

Membranes for the life sciences and their future roles in medicine

Since the global outbreak of COVID-19, membrane technology for clinical treatments, including extracorporeal membrane oxygenation (ECMO) and protective masks and clothing, has attracted intense research attention for its irreplaceable abilities. Membrane research and applications are now playing an increasingly important role in various fields of life science. In addition to intrinsic properties such as size sieving, dissolution and diffusion, membranes are often endowed with additional functions as cell scaffolds, catalysts or sensors to satisfy the specific requirements of different clinical applications. In this review, we will introduce and discuss state-of-the-art membranes and their respective functions in four typical areas of life science: artificial organs, tissue engineering, in vitro blood diagnosis and medical support. Emphasis will be given to the description of certain specific functions required of membranes in each field to provide guidance for the selection and fabrication of the membrane material. The advantages and disadvantages of these membranes have been compared to indicate further development directions for different clinical applications. Finally, we propose challenges and outlooks for future development.

Selective, user-friendly, highly porous, efficient, and rapid (SUPER) filter for isolation and analysis of rare tumor cells

Rapid, efficient, and selective separation of tumor cells from complex body fluids is urgently needed for clinical application of tumor-cell-based liquid biopsy. Herein, a size-selective affinity filtration system, named selective, user-friendly, highly porous, efficient, and rapid filter (SUPER Filter), was developed for high-performance tumor cell isolation and analysis. SUPER Filter enabled selective interaction of tumor cells with size-optimized and antibody-coated micropore walls during filtration, achieving a high efficiency of 91.0 ± 6.1% in buffer and 83.7 ± 6.4% in whole blood. Meanwhile, its larger micropore size than those of traditional filtration devices greatly reduced the nonspecific capture of background cells (55-126 cells per mL blood) with enrichment factors of 1.1 × 10⁴-1.0 × 10⁵ and a purity of 52.7 ± 4.2%. Moreover, its high porosity enabled ultra-fast (<5 s for 1 mL of blood or 10 mL of buffer samples) and user-friendly gravity-driven filtration. Finally, SUPER Filter demonstrated rapid, efficient, and selective separation of tumor cells from blood and large-volume pleural and ascetic fluid samples from cancer patients for morphological and molecular analysis. We expect that this size-selective affinity filtration strategy facilitates the clinical application of tumor-cell-based liquid biopsy.

Negative-Selection Enrichment of Circulating Tumor Cells from Peripheral Blood Using the Microfluidic CTC-iChip

The ability to isolate and analyze rare circulating tumor cells (CTCs) holds the potential to increase our understanding of cancer evolution and allows monitoring of disease and therapeutic responses through a relatively non-invasive blood-based biopsy. While many methods have been described to isolate CTCs from the blood, the vast majority rely on size-based sorting or positive selection of CTCs based on surface markers, which introduces bias into the downstream product by making assumptions about these heterogenous cells. Here we describe a negative-selection protocol for enrichment of CTCs through removal of blood components including red blood cells, platelets, and white blood cells. This procedure results in a product that is amenable to downstream single-cell analytics including RNA-Seq, ATAC-Seq and DNA methylation, droplet digital PCR (ddPCR) for tumor specific transcripts, staining and extensive image analysis, and ex vivo culture of patient-derived CTCs.

Artificial cell membrane camouflaged immunomagnetic nanoparticles for enhanced circulating tumor cells isolation

Precise and specific circulating tumor cells (CTCs) isolation is heavily interfered by blood cells and proteins. Though satisfactory results have been achieved by some cell membrane-derived platforms, following limitations have...

A comparison of transferrin-receptor and epithelial cellular adhesion molecule targeting for microfluidic separation of cancer cells

Microfluidic, flow cytometry, and immunomagnetic methods for cancer cell isolation have heavily relied on the Epithelial Cellular Adhesion Molecule (EpCAM) for affinity separation. While EpCAM has been used extensively for circulating tumor cell isolation, it cannot be used to isolate non-epithelial cells. The human transferrin receptor (CD71) can also be used for cancer cell isolation and has the advantage that as an affinity target it can separate virtually any cancer cell type, regardless of disease origin. However, direct comparison of the capture ability of EpCAM and CD71 has not been reported previously. In this work, cell capture with both EpCAM and CD71 were studied using a novel higher-throughput herringbone cell separation microfluidic device. Five separation chip models were designed and the one with the highest capture efficiency (average 90 ± 10%) was chosen to compare antigen targets for cell capture. Multiple cancer cell lines including CCRF-CEM, PC-3 and MDA-MB-231 were tested for cell capture performance using both ligands (anti-CD71 and anti-EpCAM) in the optimized chip design. PC-3 and MDA-MB-231 cells were spiked into blood at concentrations ranging from 0.5%-10%. PC-3 cells were separated by anti-CD71 and anti-EpCAM with 32-37% and 31-50% capture purity respectively, while MDA-MB-231 were separated with 35-53% and 33-56% capture purity using anti-CD71 and anti-EpCAM for all concentrations. The enrichment factor for the lowest concentrations of cells in blood ranged from 66-74X. The resulting enrichment of cancer cells shows that anti-CD71 was found to be statistically similar to anti-EpCAM for epithelial cancer cells, while anti-CD71 can be further used for non-epithelial cells, where anti-EpCAM cannot be used.

Microtechnology-enabled filtration-based liquid biopsy: challenges and practical considerations

Liquid biopsy, an important enabling technology for early diagnosis and dynamic monitoring of cancer, has drawn extensive attention in the past decade. With the rapid developments of microtechnology, it has been possible to manipulate cells at the single-cell level, which dramatically improves the liquid biopsy capability. As the microtechnology-enabled liquid biopsy matures from proof-of-concept demonstrations towards practical applications, a main challenge it is facing now is to process clinical samples which are usually of a large volume while containing very rare targeted cells in complex backgrounds. Therefore, a high-throughput liquid biopsy which is capable of processing liquid samples with a large volume in a reasonable time along with a high recovery rate of rare targeted cells from complex clinical liquids is in high demand. Moreover, the purity, viability and release feasibility of recovered targeted cells are the other three key impact factors requiring careful considerations. To date, among the developed techniques, micropore-type filtration has been acknowledged as the most promising solution to address the aforementioned challenges in practical applications. However, the presently reported studies about micropore-type filtration are mostly based on trial and error for device designs aiming at different cancer types, which requires lots of efforts. Therefore, there is an urgent need to investigate and elaborate the fundamental theories of micropore-type filtration and key features that influence the working performances in the liquid biopsy of real clinical samples to promote the application efficacy in practical applications. In this review, the state of the art of microtechnology-enabled filtration is systematically and comprehensively summarized. Four key features of the filtration, including throughput, purity, viability and release feasibility of the captured targeted cells, are elaborated to provide the guidelines for filter designs. The recent progress in the filtration mode modulation and sample standardization to improve the filtration performance of real clinical samples is also discussed. Finally, this review concludes with prospective views for future developments of filtration-based liquid biopsy to promote its application efficacy in clinical practice.

Circulating Tumor Marker Isolation with the Chemically Stable and Instantly Degradable (CSID) Hydrogel ImmunoSpheres

Here, we present chemically stable and instantly degradable (CSID) hydrogel immunospheres for the isolation of circulating tumor cells (CTCs) and circulating tumor exosomes (CTXs). The CSID hydrogels, which are prepared by the hybridization of alginate and poly(vinyl alcohol), show an equilibrium swelling ratio (ESR) of at pH 7, with a highly stable pH-responsive property. The present hybrid hydrogel is not easily disassociated in the biological buffers, thus being suitable for use in "liquid biopsy", requiring a multistep, long-term incubation process with biological samples. Also, it is gradually degraded by the action of chelating agents; effortless retrieval of the circulating markers has been achieved. Then, we modified the CSID hydrogel spheres with the anti-EpCAM antibody ("C-CSID ImmunoSpheres") and the anti-CD63 antibody ("E-CSID ImmunoSpheres") to isolate two promising circulating markers in liquid biopsy: CTCs and CTXs. The immunospheres' capabilities for marker isolation and retrieval were confirmed by a fluorescence image, where the spheres successfully isolate and effortlessly retrieve the target circulating markers. Lastly, we applied the CSID hydrogel immunospheres to five blood samples from colorectal cancer patients and retrieved average 10.8 ± 5.9 CTCs/mL and average 96.5 × 10⁶ CTXs/mL. The present CSID hydrogel immunospheres represent a simple, versatile, and time-efficient assay platform for liquid biopsy in the practical setting, enabling us to gain a better understanding of disease-related circulating markers.

Sorting Technology for Circulating Tumor Cells Based on Microfluidics

Circulating tumor cells (CTCs) carry reliable clinical information for the diagnosis and treatment of cancer that is a malignant disease with a high mortality rate. However, the amount of CTCs in the blood is quite low. To obtain credible clinical information, an efficient method of extracting CTCs is necessary. Microfluidic technology has proven its effectiveness on CTCs separation in recent years. Here, we present a comprehensive review of CTC sorting methods based on microfluidics. Specifically, we introduce four different microfluidic sorting methods of CTCs and compare their advantages and disadvantages. Finally, we summarize the analysis of CTCs based on microfluidics and present a prospective view of future research.

Performance evaluation of a high-throughput separation system for circulating tumor cells based on microcavity array

Circulating tumor cells (CTCs) are widely known as useful biomarkers in the liquid biopsies of cancer patients. Although single-cell genetic analysis of CTCs is a promising diagnostic tool that can provide detailed clinical information for precision medicine, the capacity of single-CTC isolation for genetic analysis requires improvement. To overcome this problem, we previously developed a multiple single-cell encapsulation system for CTCs using hydrogel-encapsulation, which allowed for the high-throughput isolation of single CTCs. However, isolation of a single cell from adjacent cells remained difficult and often resulted in contamination by neighboring cells due to the limited resolution of the generated hydrogel. We developed a novel multiple single-cell encapsulation system equipped with a high magnification lens for high throughput and a more accurate single-cell encapsulation. The multiple single-cell encapsulation system has sufficient sensitivity to detect immune-stained CTCs, and could also generate a micro-scaled hydrogel that can isolate a single cell from adjacent cells within 10 µm, with high efficiency. The proposed system enables high throughput and accurate single-cell manipulation and genome amplification without contamination from neighboring cells.

Detection of Circulating Tumor Cells by Fluorescence Microspheres-Mediated Amplification

Here we describe a fluorescent microspheres-based separation and analysis that enables the isolation of circulating tumor cells (CTCs) from whole blood of patients with metastatic cancer and the identification of isolated CTCs in situ without immunostaining. This approach uses antibody-functionalized fluorescent polystyrene (PS) microspheres that can selectively bind to CTCs. The binding of CTCs and fluorescent PS microspheres leads to the formation of complexes of CTCs and fluorescent PS microspheres, thereby the CTCs are size-amplified and labeled simultaneously. A pyramidal microcavity array (PMCA) is fabricated using microfabrication technology to create a precise microfilter structure with a high aspect ratio. The PMCA filter device can effectively isolate microspheres-labeled CTCs, while allow hematologic cells to deform and pass through. Using this approach, CTCs are isolated and identified in 15 of 18 patients with metastatic colorectal cancer. This approach will open new possibilities for CTCs isolation and identification and can serve a versatile platform to facilitate CTCs analysis in diverse biomedical applications.

Dynamic screening and printing of single cells using a microfluidic chip with dual microvalves

Inoculation of single cells into separate culture chambers is one of the key requirements in single-cell analysis. This paper reports an innovative microfluidic chip integrating two pneumatic microvalves to screen and print single cells onto a well plate. The upper and lower size limits of cells can be dynamically controlled by regulating the deformation of two adjacent microvalves. Numerical simulations were employed to systematically study the influence of membrane dimensions and pressure on the deflection of a valve. A mathematical model was then modified to predict the size of cells captured by a microvalve at various pressures. The membrane deflection was further studied using confocal imaging. The critical pressure trapping beads of various sizes was experimentally determined. These experiments validated the accuracy of both numerical simulations and the mathematical model. Furthermore, single beads and endothelial cells with the desired size range were screened using dual valves and printed onto well plates with 100% efficiency. Viability studies suggested that the screening process had no significant impact on cells. This device enables dynamic regulation of both the lower and the upper size limits of cells for printing. It has significant application potential in inoculating cells with desired sizes for various fields such as clonal expansion, monoclonality development and single-cell genomic studies.

Epithelial-Mesenchymal Plasticity in Circulating Tumor Cells, the Precursors of Metastasis

Circulating tumor cells offer an unprecedented window into the metastatic cascade, and to some extent can be considered as intermediates in the process of metastasis. They exhibit dynamic oscillations in epithelial to mesenchymal plasticity and provide important opportunities for prognosis, therapy response monitoring, and targeting of metastatic disease. In this manuscript, we review the involvement of epithelial-mesenchymal plasticity in the early steps of metastasis and what we have learned about its contribution to genomic instability and genetic diversity, tumor progression and therapeutic responses using cell culture, mouse models and circulating tumor cells enriched from patients.

Magnetic-assisted self-assembled aptamer/protein hybrid probes for efficient capture and rapid detection of cancer cells in whole blood

Self-assembly of building blocks for constructing multifunctional materials has opened prospects for sensing applications in the biomedical fields. In particular, the combination of aptamer with DNA assembly-based nanotechnology has greatly improved the performance of cancer cell detection. Nevertheless, the cancer cell detection strategies of integrating aptamer with protein are relatively sparse. So we have developed a self-assembled aptamer method to realize the efficient capture and rapid detection of cancer cells by ingeniously combining aptamer modified magnetic nanoparticles as capture nanoprobes with self-assembled aptamer/protein hybrid probes (SAPPs) as signal amplification probes. By merely mixing the component materials together simultaneously, the SAPPs, integrating aptamer for cancer cell recognition with protein for amplifying signal, were fabricated by DNA-governed one-step assembly. In addition, the SAPPs-based method exhibits efficient capture, rapid (about 45 min) and specific CCRF-CEM detection performance, with limits of detection down to 75 cells/mL in buffer and 200 cells/mL in whole blood.

Heterogeneity in Circulating Tumor Cells: The Relevance of the Stem-Cell Subset

The release of circulating tumor cells (CTCs) into vasculature is an early event in the metastatic process. The analysis of CTCs in patients has recently received widespread attention because of its clinical implications, particularly for precision medicine. Accumulated evidence documents a large heterogeneity in CTCs across patients. Currently, the most accepted view is that tumor cells with an intermediate phenotype between epithelial and mesenchymal have the highest plasticity. Indeed, the existence of a meta-stable or partial epithelial–mesenchymal transition (EMT) cell state, with both epithelial and mesenchymal features, can be easily reconciled with the concept of a highly plastic stem-like state. A close connection between EMT and cancer stem cells (CSC) traits, with enhanced metastatic competence and drug resistance, has also been described. Accordingly, a subset of CTCs consisting of CSC, present a stemness profile, are able to survive chemotherapy, and generate metastases after xenotransplantation in immunodeficient mice. In the present review, we discuss the current evidence connecting CTCs, EMT, and stemness. An improved understanding of the CTC/EMT/CSC connections may uncover novel therapeutic targets, irrespective of the tumor type, since most cancers seem to harbor a pool of CSCs, and disclose important mechanisms underlying tumorigenicity.

Leukocyte-Repelling Biomimetic Immunomagnetic Nanoplatform for High-Performance Circulating Tumor Cells Isolation

Downstream studies of circulating tumor cells (CTCs), which may provide indicative evaluation information for therapeutic efficacy, cancer metastases, and cancer prognosis, are seriously hindered by the poor purity of enriched CTCs as large amounts of interfering leukocytes still nonspecifically bind to the isolation platform. In this work, biomimetic immunomagnetic nanoparticles (BIMNs) with the following features are designed: i) the leukocyte membrane camouflage, which could greatly reduce homologous leukocyte interaction and actualize high-purity CTCs isolation, is easily extracted by graphene nanosheets; ii) facile antibody conjugation can be achieved through the "insertion" of biotinylated lipid molecules into leukocyte-membrane-coated nanoparticles and streptavidin conjunction; iii) layer-by-layer assembly techniques could integrate high-magnetization Fe₃ O₄ nanoparticles and graphene nanosheets efficiently. Consequently, the resulting BIMNs achieve a capture efficiency above 85.0% and CTCs purity higher than 94.4% from 1 mL blood with 20-200 CTCs after 2 min incubation. Besides, 98.0% of the isolated CTCs remain viable and can be directly cultured in vitro. Moreover, application of the BIMNs to cancer patients' peripheral blood shows good reproducibility (mean relative standard deviation 8.7 ± 5.6%). All results above suggest that the novel biomimetic nanoplatform may serve as a promising tool for CTCs enrichment and detection from clinical samples.

Random and aligned electrospun PLGA nanofibers embedded in microfluidic chips for cancer cell isolation and integration with air foam technology for cell release

BACKGROUND

Circulating tumor cells (CTCs) comprise the high metastatic potential population of cancer cells in the blood circulation of humans; they have become the established biomarkers for cancer diagnosis, individualized cancer therapy, and cancer development. Technologies for the isolation and recovery of CTCs can be powerful cancer diagnostic tools for liquid biopsies, allowing the identification of malignancies and guiding cancer treatments for precision medicine.

METHODS

We have used an electrospinning process to prepare poly(lactic-co-glycolic acid) (PLGA) nanofibrous arrays in random or aligned orientations on glass slips. We then fabricated poly(methyl methacrylate) (PMMA)-based microfluidic chips embedding the PLGA nanofiber arrays and modified their surfaces through sequential coating with using biotin-(PEG)7-amine through EDC/NHS activation, streptavidin (SA), and biotinylated epithelial-cell adhesion-molecule antibody (biotin-anti-EpCAM) to achieve highly efficient CTC capture. When combined with an air foam technology that induced a high shear stress and, thereby, nondestructive release of the captured cells from the PLGA surfaces, the proposed device system operated with a high cell recovery rate.

RESULTS

The morphologies and average diameters of the electrospun PLGA nanofibers were characterized using scanning electron microscopy (SEM) and confocal Raman imaging. The surface chemistry of the PLGA nanofibers conjugated with the biotin-(PEG)7-amine was confirmed through time-of-flight secondary ion mass spectrometry (ToF-SIMS) imaging. The chip system was studied for the effects of the surface modification density of biotin-(PEG)7-amine, the flow rates, and the diameters of the PLGA nanofibers on the capture efficiency of EpCAM-positive HCT116 cells from the spiked liquid samples. To assess their CTC capture efficiencies in whole blood samples, the aligned and random PLGA nanofiber arrays were tested for their abilities to capture HCT116 cells, providing cancer cell capture efficiencies of 66 and 80%, respectively. With the continuous injection of air foam into the microfluidic devices, the cell release efficiency on the aligned PLGA fibers was 74% (recovery rate: 49%), while it was 90% (recovery rate: 73%) on the random PLGA fibers, from tests of 200 spiked cells in 2 mL of whole blood from healthy individuals. Our study suggests that integrated PMMA microfluidic chips embedding random PLGA nanofiber arrays may be suitable devices for the efficient capture and recovery of CTCs from whole blood samples.

A review of sorting, separation and isolation of cells and microbeads for biomedical applications: microfluidic approaches

We have reviewed the microfluidic approaches for cell/particle isolation and sorting, and extensively explained the mechanism behind each method.

Advances in isolation and detection of circulating tumor cells based on microfluidics

Circulating tumor cells (CTCs) are the cancer cells that circulate in the peripheral blood after escaping from the original or metastatic tumors. CTCs could be used as non-invasive source of clinical information in early diagnosis of cancer and evaluation of cancer development. In recent years, CTC research has become a hotspot field wherein many novel CTC detection technologies based on microfluidics have been developed. Great advances have been made that exhibit obvious technical advantages, but cannot yet satisfy the current clinical requirements. In this study, we review the main advances in isolation and detection methods of CTC based on microfluidics research over several years, propose five technical indicators for evaluating these methods, and explore the application prospects. We also discuss the concepts, issues, approaches, advantages, limitations, and challenges with an aim of stimulating a broader interest in developing microfluidics-based CTC detection technology.

Engineered nanointerfaces for microfluidic isolation and molecular profiling of tumor-specific extracellular vesicles

Extracellular vesicles (EVs) carry RNA, DNA, proteins, and lipids. Specifically, tumor-derived EVs have the potential to be utilized as disease-specific biomarkers. However, a lack of methods to isolate tumor-specific EVs has limited their use in clinical settings. Here we report a sensitive analytical microfluidic platform (^EVHB-Chip) that enables tumor-specific EV-RNA isolation within 3 h. Using the ^EVHB-Chip, we achieve 94% tumor-EV specificity, a limit of detection of 100 EVs per μL, and a 10-fold increase in tumor RNA enrichment in comparison to other methods. Our approach allows for the subsequent release of captured tumor EVs, enabling downstream characterization and functional studies. Processing serum and plasma samples from glioblastoma multiforme (GBM) patients, we can detect the mutant EGFRvIII mRNA. Moreover, using next-generation RNA sequencing, we identify genes specific to GBM as well as transcripts that are hallmarks for the four genetic subtypes of the disease.

Extracellular vesicles can carry many different types of biological cargo and have been investigated as a biomarker for cancer diagnosis. Here the authors develop a microfluidic platform for rapid and sensitive isolation of tumor-specific extracellular vesicles.

High-Throughput Selective Capture of Single Circulating Tumor Cells by Dielectrophoresis at a Wireless Electrode Array

We demonstrate continuous high-throughput selective capture of circulating tumor cells by dielectrophoresis at arrays of wireless electrodes (bipolar electrodes, BPEs). The use of BPEs removes the requirement of ohmic contact to individual array elements, thus enabling otherwise unattainable device formats. Capacitive charging of the electrical double layer at opposing ends of each BPE allows an AC electric field to be transmitted across the entire device. Here, two such designs are described and evaluated. In the first design, BPEs interconnect parallel microchannels. Pockets extruding from either side of the microchannels volumetrically control the number of cells captured at each BPE tip and enhance trapping. High-fidelity single-cell capture was achieved when the pocket dimensions were matched to those of the cells. A second, open design allows many non-targeted cells to pass through. These devices enable high-throughput capture of rare cells and single-cell analysis.