Enhanced Photoelectrochemical Method for Sensitive Detection of Protein Kinase A Activity Using TiO2/g-C3N4, PAMAM Dendrimer, and Alkaline Phosphatase

Application of a porous zirconium-based MOF nanoplate as an affinity ECL platform for the detection of protein kinase activity and inhibitor screening

Abnormal kinase expression affects phosphorylation in the human body, which is associated with numerous diseases, including cancer, diabetes mellitus, and Alzheimer's disease. In this study, we synthesized a highly stable, two-dimensional, luminescence-functionalized metal-organic framework with remarkable electrochemiluminescence (ECL) by immobilizing 9,10-Di(p-carboxyphenyl) anthracene (dca) on a zirconium cluster (dca-Zr₁₂) via a strong coordination bond between -COO⁻ and Zr⁴⁺. This novel and simple platform relies on the highly specific identification of phosphate molecules by the ultra-thin dca-Zr₁₂ nanoplate through carboxylate-Zr⁴⁺-phosphate chemistry. The ferrocene-labeled peptide substrate (Fc-S-Peptide) was phosphorylated in the presence of protein kinase A (PKA) and adenosine 5'-triphosphate (ATP), and the resulting phosphopeptide could subsequently be precisely captured by the zirconium sites of the dca-Zr12-modified electrode and, eventually, quench the ECL and gain a signal-off state. This rapid and simple detection strategy was successfully employed to measure PKA activity, with a detection limit as low as 0.35 mU mL-1. Based on the results, it exhibited high selectivity and can be applied for screening PKA inhibitors. The technique was subsequently applied to detect protein kinase activity in drug-stimulated MCF-7 cell lysates, demonstrating its potential for kinase-related investigations. Further, this platform could identify the activity of other kinase types with universal applicability.

Constructing Photoactive Au NP/MXene-BiOCl Moiré Superlattice Nanosheets for Photoelectrochemical Detection of Protein Kinase Activity

A novel photoelectrochemical (PEC) biosensor was proposed by preparing Au NP/MXene-BiOCl Moiré superlattice nanosheets as the probes. Upon irradiation with visible light, the probe exhibited excellent electrical conductivity as well as high photoelectric conversion efficiency. Benefitting from the excellent PEC property of the hybrid probe, sensitive and accurate detection of protein kinase activity was demonstrated with a limit of detection of 0.0029 U mL-1. This study verifies the great PEC potential of MXene hybrid nanomaterials.

Phosphopeptide-bridged NH2-TiO2-mediated carbon dots self-enhancing and electrochemiluminescence microsensors for label-free protein kinase A detection

A novel electrochemiluminescence (ECL) method was developed for determination of protein kinase A (PKA) ultra-sensitively based on amidated nano-titanium (NH2-TiO2) embellished carbon dots (Mg@N-CDs) fluorescent probe, which integrated the target recognition and ECL signal enhancement. The Cys-labeled kemptides were employed to build a serine-rich synthetic substrate-heptapeptide (Cys-kemptide) on the Au-electrode surface. Then, the PKA-induced biosensor was triggered as a signal switch to introduce the large amounts of TiO2 decorated Mg@N-CD nanohybrid (Ti@NMg-CDs) into AuE/Cys-phosphopeptides for signal output. In particular, the presence of PKA could induce the formation of Cys-phosphopeptides by the catalytic reaction between specific substrate (kemptide) and PKA, which acts as an initiator to link the Ti@NMg-CDs according to the bridge interactions Ti-O-P. In this way, multiple Cys-phosphopeptides were adsorbed onto a single Ti@NMg-CDs, and the Ti@NMg-CDs not only provided high specific selectivity but also large surface area, as well as unprecedented high ECL efficiency. Using this PKA-induced enhanced sensor, the limit of detection of the PKA was 4.89 × 10-4 U/mL (S/N = 3). The proposed ECL biosensor was also universally applicable for the screening of PKA inhibitors and determining of other kinases activity. Our sensing system has excellent performance of specificity and the screening of kinase inhibitors, as well as it will inspire future effort in clinical diagnostics and new drug discovery.

Red and near-infrared light-activated photoelectrochemical nanobiosensors for biomedical target detection

Photoelectrochemical (PEC) nanobiosensors integrate molecular (bio)recognition elements with semiconductor/plasmonic photoactive nanomaterials to produce measurable signals after light-induced reactions. Recent advancements in PEC nanobiosensors, using light-matter interactions, have significantly improved sensitivity, specificity, and signal-to-noise ratio in detecting (bio)analytes. Tunable nanomaterials activated by a wide spectral radiation window coupled to electrochemical transduction platforms have further improved detection by stabilizing and amplifying electrical signals. This work reviews PEC biosensors based on nanomaterials like metal oxides, carbon nitrides, quantum dots, and transition metal chalcogenides (TMCs), showing their superior optoelectronic properties and analytical performance for the detection of clinically relevant biomarkers. Furthermore, it highlights the innovative role of red light and NIR-activated PEC nanobiosensors in enhancing charge transfer processes, protecting them from biomolecule photodamage in vitro and in vivo applications. Overall, advances in PEC detection systems have the potential to revolutionize rapid and accurate measurements in clinical diagnostic applications. Their integration into miniaturized devices also supports the development of portable, easy-to-use diagnostic tools, facilitating point-of-care (POC) testing solutions and real-time monitoring.

Nanostructured material-based optical and electrochemical detection of amoxicillin antibiotic

The penicillin derivative amoxicillin (AMX) plays an important role in treating various types of infections caused by bacteria. However, excessive use of AMX may have negative health effects. Therefore, it is of utmost importance to detect and quantify the AMX in pharmaceutical drugs, biological fluids, and environmental samples with high sensitivity. Therefore, this review article provides valuable and up-to-date information on nanostructured material-based optical and electrochemical sensors to detect AMX in various biological and chemical samples. The role of using different nanostructured materials on the performance of important optical sensors such as colorimetric sensors, fluorescence sensors, surface-enhanced Raman scattering sensors, chemiluminescence/electroluminescence sensors, optical immunosensors, optical fibre-based sensors, and several important electrochemical sensors based on different electrode types have been discussed. Moreover, nanocomposites, polymer, and MXenes-based electrochemical sensors have also been discussed, in which such materials are being used to further enhance the sensitivity of these sensors. Furthermore, nanocomposite-based photo-electrochemical sensors and the market availability of biosensors including AMX have also been discussed briefly. Finally, the conclusion, challenges, and future perspectives of the above-mentioned sensing techniques for AMX detection are presented.

Zr4+-mediated DNAzyme-driven DNA walker amplification strategy for electrochemical assay of protein kinase a activity and inhibition

Protein kinase A (PKA) can regulate many cellular biological processes by phosphorylation substrate peptide or protein. Sensitive detection of PKA activity is critical for the PKA-related drug discovery and disease diagnosis. A new electrochemical biosensing method was developed for detection of PKA activity based on Zr⁴⁺-mediated DNAzyme-driven DNA walker signal amplification strategy. In this strategy, the special designed substrate peptide and a thiolated methylene blue-labeled hairpin DNA (MB-hpDNA) containing a single ribonucleic acid group (rA) could be anchored on the surface of gold electrode by Au-S bond. In the presence of adenosine triphosphate (ATP) and PKA, substrate peptide was phosphorylated and linked with walker DNA (WD) via the robust phosphate-Zr⁴⁺-phosphate chemistry. The linked WD hybridized with the loop region of MB-hpDNA to form a Mn²⁺-dependent deoxynuclease (DNAzyme), which cleaved the MB-hpDNA into MB-labeled fragment releasing away from electrode surface, resulting in a dramatic decrease of electrochemical signal and providing an electrochemical sensing platform for PKA activity detection. The response signal of the developed biosensor is proportional to the logarithm of PKA concentration in the range of 0.05 U mL^-1 to 100 U mL^-1, with a detection limit of 0.017 U mL^-1 at a signal to noise ratio of 3. Furthermore, the proposed method can also be applied for the evaluation of PKA inhibition and PKA activity assay in cell samples. Therefore, the proposed biosensor shows great promise as a universal tool for diagnostics and drug discovery of PKA-related diseases.

Snowflake-like CdS@ZnIn2S4 heterojunction-based photocatalyst-electrolyte effect: An innovative mode for photoelectrochemical immunoassay

Exploiting innovative strategies with signal amplification in photoelectrochemical (PEC) biosensing systems to realize sensitive screening of low-abundance proteins has become one of the mainstream research orientations. Herein we reported a new strategy to amplify photocurrent signal employing a photocatalyst-electrolyte effect in alkaline media for the sensitive monitoring of prostate-specific antigen (PSA) using snowflake-liked CdS@ZnIn2S4 heterojunction as photosensitizer. In this strategy, both the band-edge position and surface redox reaction process were subtly altered by modulating the alkalinity of electrolyte. The hydroxyl anions (OH-) from NaOH could be oxidized to hydroxyl radicals (·OH) by the holes in CdS@ZnIn2S4, thus accelerating the scavenging of holes and promoting the photocurrent. Based on the above-mentioned mechanism, a sensitive split-type glucose oxidase-mediated PEC immunosensor for PSA detection was fabricated. Upon target PSA introduction, the glucose acid was generated through the sandwich-type immunoreaction to affect the alkalinity of PEC detection environment, thereby suppressing the photocurrent intensity. The CdS@ZnIn2S4-based PEC immunosensor exhibited satisfactory photocurrent responses with a good linear range of 0.04-40 ng mL-1 at a limit of detection of 14 pg mL-1. Significantly, this research not only introduces an effective strategy to detect PSA with good sensitivity and specificity, but also provides a new insight to amplify the signal by regulating the electrolyte.

Assessment of Crosslinkers between Peptide Antigen and Carrier Protein for Fusion Peptide-Directed Vaccines against HIV-1

Conjugate-vaccine immunogens require three components: a carrier protein, an antigen, and a crosslinker, capable of coupling antigen to carrier protein, while preserving both T-cell responses from carrier protein and B-cell responses from antigen. We previously showed that the N-terminal eight residues of the HIV-1 fusion peptide (FP8) as an antigen could prime for broad cross-clade neutralizing responses, that recombinant heavy chain of tetanus toxin (rTTHC) as a carrier protein provided optimal responses, and that choice of crosslinker could impact both antigenicity and immunogenicity. Here, we delve more deeply into the impact of varying the linker between FP8 and rTTHC. In specific, we assessed the physical properties, the antigenicity, and the immunogenicity of conjugates for crosslinkers ranging in spacer-arm length from 1.5 to 95.2 Å, with varying hydrophobicity and crosslinking-functional groups. Conjugates coupled with different degrees of multimerization and peptide-to-rTTHC stoichiometry, but all were well recognized by HIV-fusion-peptide-directed antibodies VRC34.01, VRC34.05, PGT151, and ACS202 except for the conjugate with the longest linker (24-PEGylated SMCC; SM(PEG)24), which had lower affinity for ACS202, as did the conjugate with the shortest linker (succinimidyl iodoacetate; SIA), which also had the lowest peptide-to-rTTHC stoichiometry. Murine immunizations testing seven FP8-rTTHC conjugates elicited fusion-peptide-directed antibody responses, with SIA- and SM(PEG)24-linked conjugates eliciting lower responses than the other five conjugates. After boosting with prefusion-closed envelope trimers from strains BG505 clade A and consensus clade C, trimer-directed antibody-binding responses were lower for the SIA-linked conjugate; elicited neutralizing responses were similar, however, though statistically lower for the SM(PEG)24-linked conjugate, when tested against a strain especially sensitive to fusion-peptide-directed responses. Overall, correlation analyses revealed the immunogenicity of FP8-rTTHC conjugates to be negatively impacted by hydrophilicity and extremes of length or low peptide-carrier stoichiometry, but robust to other linker parameters, with several commonly used crosslinkers yielding statistically indistinguishable serological results.

A dual-mechanism-driven electrochemiluminescence aptasensor for sensitive detection of β-amyloid peptides

β-Amyloid (Aβ) peptides can bind both Cu²⁺ and heme cofactors simultaneously to form heme-Cu²⁺-Aβ complexes, which are proposed to generate toxic partially reduced oxygen species (PROS, e.g., H₂O₂) and play a vital role in Alzheimer's disease (AD). In this paper, a competitive dual-mechanism-driven electrochemiluminescence (ECL) aptasensor integrating the synergistic enhancement and steric hindrance effect was described for Aβ detection. Specifically, graphite carbon nitride (g-C₃N₄) as an effective ECL luminescent substrate and Au nanoparticles were sequentially assembled on the Au electrode surface, and then a thiol-modified aptamer for capturing Aβ peptide was attached to the surface of the electrode through the Au-S bond. Aβ peptides were simultaneously incubated with heme and Cu²⁺, and the forming heme-Cu²⁺-Aβ complexes were subsequently anchored on the electrode through the specific recognition between the target Aβ and the aptamer. When the concentration of the target Aβ is low, the synergistic enhancement effect arising from K₂S₂O₈ with in situ generated H₂O₂ is predominant, resulting in an increase in the ECL signal of g-C₃N₄. In contrast, when the concentration of Aβ is high, the steric hindrance effect generated from heme-Cu²⁺-Aβ complexes is dominant, leading to a decrease in the ECL signal. The present sensor exhibits a favorable linear response for the detection of Aβ with a relatively low detection limit of 0.24 pM, and provides a more sensitive and selective platform for bioanalysis.

An overview of poly (amide-amine) dendrimers functionalized chromatographic separation materials

Chromatography is one of the most important separation techniques in analytical chemistry. In which, the separation materials are the core for good separation results. Poly (amide-amine) dendrimers with regular three-dimensional structure, abundant terminal groups, controllable molecule chains, and unique cavities appear to have a positive impact on chromatographic separation materials. In the past decades, poly (amide-amine) grafted adsorbents and stationary phases have presented high grafting efficiency, controllable surface structure, good dispersion, and wide practical applications. In this review, the prepared poly (amide-amine) functionalized separation materials and their applications are systematically summarized. Functions, significance, structure-actvity relationships and benefits of poly (amide-amine) dendrimers in the proposed separation materials are discussed in detail. And we hope to provide a useful reference for the future development of chromatographic separation materials and inspire new discoveries in the study of poly (amide-amine) functionalized materials.

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.

A sandwiched photoelectrochemical biosensing platform for detecting Cytokeratin-19 fragments based on Ag2S-sensitized BiOI/Bi2S3 heterostructure amplified by sulfur and nitrogen co-doped carbon quantum dots

A sandwiched photoelectrochemical (PEC) immunosensor based on BiOI/Bi₂S₃/Ag₂S was designed for the quantitative detection of cytokeratin-19 fragments (CYFRA21-1) in serum. In this work, due to the intervention of the narrow band gap Bi₂S₃, the absorption of the light source by the BiOI/Bi₂S₃ heterostructure has been significantly enhanced. Meanwhile, the matched band structure of BiOI, Bi₂S₃ and Ag₂S promoted the rapid transfer of electrons between the conduction bands and effectively inhibited the recombination of electron-hole pairs, thus enhanced the photoelectric signals. Sulfur and nitrogen co-doped carbon quantum dots (S,N-CQDs) with up-conversion luminescence properties provided more light energy for the base materials. On the other hand, S,N-CQDs were combined with Ab₂ through polydopamine (PDA), as secondary antibody labels, further enhanced the sensitivity of the sensor. Herein, the linear range of the sensor was from 0.001 to 100 ng mL^-1 and the detection limit was 1.72 pg mL^-1. In addition, the sensor provides a feasible way for the detection of tumor markers due to its excellent selectivity, repeatability and good stability.

Heterogeneous sensing of post-translational modification enzymes by integrating the advantage of homogeneous analysis

Heterogeneous analysis has great application prospects in the detection of post-translational modification (PTM) enzymes with the advantages of signal enhancement, less sample demand, and high sensitivity and selectivity. Nevertheless, once the substrate was fixed on a solid interface, the steric hindrance might limit the approaching of catalytic center to the substrate, thus reducing the efficiency of PTM. Herein, we suggested that the avidin-modified interface could be used to develop heterogeneous sensing platforms with biotin-labeled substrates as the probes, in which the enzymatic PTM was performed in solution and the heterogeneous assay was conducted on a solid surface. The sensing strategy integrates the advantages but overcomes the defects of both homogeneous and heterogeneous assays. Protein kinase A (PKA) and histone acetyltransferase (HAT) were determined as the examples by using sequence-specific peptide substrates. The signal changes were monitored by HRP-based colorimetric assay and antibody-amplified surface plasmon resonance (SPR). The methods were used for analysis of cell lysates and evaluation of inhibition efficiency with satisfactory results. The strategy can be used for the detection of a variety of biological enzymes and provide a new idea for the design of various heterogeneous biosensors. Thus, this work should be of great significance to the popularization and practical application of biosensors.

A signal-off photoelectrochemical aptasensor for ultrasensitive 17β-estradiol detection based on rose-like CdS@C nanostructure and enzymatic amplification

Carbon-coated cadmium sulfide rose-like nanostructures (CdS@C NRs) were prepared via a facile solvothermal approach and used as the photoelectrochemical (PEC) sensing platform for the integration of functional biomolecules. Based on this, a novel "signal-off" PEC aptasensor mediated by enzymatic amplification was proposed for the sensitive and selective detection of 17β-estradiol (E2). In the presence of E2, alkaline phosphatase-modified aptamer (ALP-apta) were released from the electrode surface through the specific recognition with E2, which caused the negative effect on PEC response due to the decrease of ascorbic acid (AA) produced by the ALP in situ enzymatic catalysis. The developed PEC aptasensor for detection of E2 exhibited a wide linear range of 1.0-250 nM, with the low detection limit of 0.37 nM. This work provides novel insight into the design of potential phoelectroactive materials and the application of signal amplification strategy in environmental analysis field.

Visible-Light-Assisted Photoelectrochemical Biosensing of Uric Acid Using Metal-Free Graphene Oxide Nanoribbons

In this study, we demonstrate the visible-light-assisted photoelectrochemical (PEC) biosensing of uric acid (UA) by using graphene oxide nanoribbons (GONRs) as PEC electrode materials. Specifically, GONRs with controlled properties were synthesized by the microwave-assisted exfoliation of multi-walled carbon nanotubes. For the detection of UA, GONRs were adopted to modify either a screen-printed carbon electrode (SPCE) or a glassy carbon electrode (GCE). Cyclic voltammetry analyses indicated that all Faradaic currents of UA oxidation on GONRs with different unzipping/exfoliating levels on SPCE increased by more than 20.0% under AM 1.5 irradiation. Among these, the GONRs synthesized under a microwave power of 200 W, namely GONR(200 W), exhibited the highest increase in Faradaic current. Notably, the GONR(200 W)/GCE electrodes revealed a remarkable elevation (~40.0%) of the Faradaic current when irradiated by light-emitting diode (LED) light sources under an intensity of illumination of 80 mW/cm². Therefore, it is believed that our GONRs hold great potential for developing a novel platform for PEC biosensing.

PCN-222@g-C3N4 cathodic materials for "signal-off" photoelectrochemical sensing of kanamycin sulfate

A novel cathodic photoelectrochemical (PEC) sensor was developed for the ultrasensitive detection of kanamycin sulfate (KAM) based on the g-C3N4 coupled zirconium-based porphyrinic metal-organic framework (PCN-222). Photocathodes made by double n-type semiconductors, which was attributed to the transfer of electrons and holes from g-C3N4 broad band to PCN-222 with narrow band gap. The photocurrent decreased when KAM was added, which was conducive to the construction of the PEC sensor. Then, the PCN-222@g-C3N4 was used as a photosensitive platform to construct a label-free strategy and ultrasensitive detection of KAM with wide linear range from 1 to 1000 nM and a low detection limit of 0.127 nM. Moreover, this sensing platform shows good selectivity, favourable reproducibility and brilliant stability. The reported sensors provided great potential for the detection of KAM in actual samples.

Investigation of the inhibited biotoxicity of heavy metals towards 5- formylcytosine in rice by hydrochar based on photoelectrochemical biosensor

A photoelectrochemical (PEC) biosensor was constructed for 5-formylcytosine (5fC) nucleotide detection based on Ag₂S@WS₂ photoactive material and FeVO₄ catalytic signal quenching. After Ag₂S@WS₂ was modified onto the ITO substrate surface, 5fC recognition reagent of Au@4-amino3hydrazino5mercapto-1,2,4-triazol (Au@AHMT) was further modified through electrostatic adsorption. Afterwards, based on the specific chemical reaction between -NH₂ and -CHO, 5fC can be selectively recognized and captured. Subsequently, the nanoenzyme of FeVO₄ was recognized based on the specific reaction between the phosphate group of 5fC nucleotide and Fe³⁺. Under the catalysis of FeVO₄, the 4-chloro-1-naphthol in the detection solution can be oxidized to generate a precipitate, which will be retained on the electrode surface to inhibit the PEC signal. The developed method presented a widely dynamic range from 0.1 to 400 nM. The detection limit was 0.062 nM (3σ). This method also showed good detection selectivity, reproducibility and stability. The applicability was verified by investigating 5fC content change in genomic DNA of rice tissues after incubated with heavy metals. Moreover, the inhibited influence of hydrochar towards heavy metals was also assessed.

Construction of a Dye-Sensitized and Gold Plasmon-Enhanced Cathodic Photoelectrochemical Biosensor for Methyltransferase Activity Assay

DNA methyltransferases may function as important biomarkers of cancers and genetic diseases. Herein, we develop a dye-sensitized and gold plasmon-enhanced cathodic photoelectrochemical (PEC) biosensor on the basis of p-type covalent organic polymers (COPs) for the signal-on measurement of M.SssI methyltransferase (M.SssI MTase). The cathodic PEC biosensor is constructed by the in situ growth of p-type COP films onto a glass coated with indium tin oxide and the subsequent assembly of biotin- and HS-labeled double-stranded DNA (dsDNA) probes onto the COP film via biotin-streptavidin interaction. The dsDNA probe contains the recognition sequence of M.SssI MTase. The COP thin films possess a porous ultrathin nanosheet structure with abundant active sites, facilitating the generation of a high photocurrent compared with the hydrothermally synthesized ones. The presence of DNA methyltransferases can prevent the digestion of restriction endonuclease HpaII, consequently inducing the introduction of gold nanoparticles (AuNPs) to the dsDNA probes via the S-Au bond and the intercalation of rhodamine B (RhB) into the DNA grooves to produce a high photocurrent due to the dye-photosensitized enhancement and AuNP-mediated surface plasmon resonance. However, in the absence of M.SssI MTase, HpaII digests the dsDNA probes, and neither AuNPs nor RhB can be introduced onto the electrode surface, leading to a low photocurrent. This cathodic PEC biosensor possesses high sensitivity and good selectivity, and it can screen the inhibitors and detect M.SssI MTase in serum as well.

A two fluorescent signal indicator-based ratio fluorometric alkaline phosphatase assay based on one signal precursor

Two fluorescent signal indicators were simply converted from one organic precursor system by using the superior oxidation capability of manganese dioxide (MnO2) nanosheets for the first time, finally resulting in the successful fabrication of a ratio fluorometric bioassay of alkaline phosphatase (ALP).

Photoelectrochemical detection of human epidermal growth factor receptor 2 (HER2) based on Co3O4-ascorbic acid oxidase as multiple signal amplifier

A sensitive photoelectrochemical (PEC) sensor based on hexagonal carbon nitride tubes (HCNT) as photoactive material was prepared for the detection of human epidermal growth factor receptor 2 (HER2). Magnetic Fe₃O₄ nanospheres (MNs) modified with anti-HER2 antibodies were employed for highly efficient capture of HER2 from serum sample, and Co₃O₄ nanoparticles (Co₃O₄ NPs) modified with ascorbic acid oxidase (AAO) as well as HER2 aptamer were used for signal amplification. When the aptamer-Co₃O₄-AAO probe was captured onto the electrode surface through the specific binding of the aptamer with HER2, the photocurrent intensity decreased. This was because Co₃O₄ NPs competed with HCNT for consumption of the excitation energy. As a consequence AAO catalyzed the oxidation of the electron donor (AA), and the aptamer-Co₃O₄-AAO probe increased the steric hindrance at the electrode surface, leading to significant photocurrent intensity decrease, thus realizing multiple signal amplification. Based on this signal amplification strategy, at 0 V (vs Ag/AgCl), the PEC sensor shows a wide linear response ranging from 1 pg mL^-1 to 1 ng mL^-1 with a low detection limit of 0.026 pg mL^-1 for HER2. Importantly, the prepared PEC sensor was applied for detection of HER2 in human serum samples with recoveries between 98.8 and 101%. Sensitive photoelectrochemical sensor based on Co₃O₄ nanoparticles modified with ascorbic acid oxidase for signal amplification is reported.

Graphitic Carbon Nitride Causes Widespread Global Molecular Changes in Epithelial and Fibroblast Cells

For scaffold and imaging applications, nanomaterials such as graphene and its derivatives have been widely used. Graphitic carbon nitride (g-C₃N₄) is among one such derivative of graphenes, which draws strong consideration due to its physicochemical properties and photocatalytic activity. To use g-C₃N₄ for biological applications, such as molecular imaging or drug delivery, it must interact with the epithelium, cross the epithelial barrier, and then come in contact with the extracellular matrix of the fibroblast cells. Thus, it becomes essential to understand its molecular mechanism of action. Hence, in this study, to understand the molecular reprogramming associated with g-C₃N₄, global gene expression using DNA microarrays and proteomics using tandem mass tag (TMT) labeling and mass spectrometry were performed in epithelial and fibroblast cells, respectively. Our results showed that g-C₃N₄ can cross the epithelial barrier by regulating the adherens junction proteins. Further, using g-C₃N₄-PDMS scaffolds as a mimic of the extracellular matrix for fibroblast cells, the common signaling pathways were identified between the epithelium and fibroblast cells. These pathways include Wnt signaling, integrin signaling, TGF-β signaling, cadherin signaling, oxidative stress response, ubiquitin proteasome pathway, and EGF receptor signaling pathways. These altered signature pathways identified could play a prominent role in g-C₃N₄-mediated cellular interactions in both epithelial and fibroblast cells. Additionally, β catenin, EGFR, and MAP2K2 protein-protein interaction networks could play a prominent role in fibroblast cell proliferation. The findings could further our knowledge on g-C₃N₄-mediated alterations in cellular molecular signatures, enabling the potential use of these materials for biological applications such as molecular imaging and drug delivery.

Nanostructure-based photoelectrochemical sensing platforms for biomedical applications

As a newly developed and powerful analytical method, the use of photoelectrochemical (PEC) biosensors opens up new opportunities to provide wide applications in the early diagnosis of diseases, environmental monitoring and food safety detection. The properties of diverse photoactive materials are one of the essential factors, which can greatly impact the PEC performance. The continuous development of nanotechnology has injected new vitality into the field of PEC biosensors. In many studies, much effort on PEC sensing with semiconductor materials is highlighted. Thus, we propose a systematic introduction to the recent progress in nanostructure-based PEC biosensors to exploit more promising materials and advanced PEC technologies. This review briefly evaluates the several advanced photoactive nanomaterials in the PEC field with an emphasis on the charge separation and transfer mechanism over the past few years. In addition, we introduce the application and research progress of PEC sensors from the perspective of basic principles, and give a brief overview of the main advances in the versatile sensing pattern of nanostructure-based PEC platforms. This last section covers the aspects of future prospects and challenges in the nanostructure-based PEC analysis field.

Highly sensitive determination of endocrine disrupting chemicals in foodstuffs through magnetic solid-phase extraction followed by high-performance liquid chromatography-tandem mass spectrometry

BACKGROUND

Endocrine disrupting chemicals (EDCs), proved to be potential carcinogenic threats to human health, have received great concerns in food field. It was essential to develop effective methods to detect EDCs in food samples. The present study proposed an efficient method to determine trace EDCs including estrone (E1), 17β-estradiol (E2), estriol (E3) and bisphenol A (BPA) based on magnetic solid-phase extraction (MSPE) coupled high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) in meat samples.

RESULTS

Fe₃ O₄ @COF(TpBD)/TiO₂ nanocomposites were synthesized via functionalization of magnetic covalent organic frameworks (COFs) with titanium dioxide (TiO₂ ) nanoparticles, and used as absorbents of MSPE to enrich EDCs. The efficient EDCs enrichment relies on π-π stacking interaction, hydrogen bonding, and the interaction between titanium ions (IV, Ti⁴⁺ ) and hydroxyl groups in EDCs, which improves the selectivity and sensitivity. Under the optimized conditions, target EDCs were rapidly extracted through MSPE with 5 min. Combining Fe₃ O₄ @COF(TpBD)/TiO₂ based MSPE and HPLC-MS/MS to determine EDCs, good linearities were observed with correlation coefficient (R² ) ≥ 0.9989. The limits of detection (LODs) and limits of quantification (LOQs) were 0.13-0.41 μg kg^-1 and 0.66-1.49 μg kg^-1 , respectively. Moreover, the proposed method was successfully applied to real samples analysis.

CONCLUSIONS

The established MSPE-HPLC-MS/MS method was successfully applied to determine EDCs in meat samples with rapidness, improved selectivity and sensitivity. It shows great prospects for EDCs detection in other complicated matrices. © 2020 Society of Chemical Industry.

Sensitive Fluorescence Assay for the Detection of Alkaline Phosphatase Based on a Cu2+-Thiamine System

The authors describe a novel, facile, and sensitive fluorometric strategy based on a Cu²⁺-thiamine (Cu²⁺-TH) system for the detection of alkaline phosphatase (ALP) activity and inhibition. The principle of the method is as follows. Under a basic conditions, TH, which does not exhibit a fluorescence signal, is oxidized into fluorescent thiochrome (TC) by Cu²⁺. Ascorbic acid 2-phosphate (AAP), which is the enzyme substrate, is hydrolyzed to produce ascorbic acid (AA) by ALP. The newly formed AA then reduces Cu²⁺ to Cu⁺, which prevents the oxidation of TH by Cu²⁺; as a result, the fluorescent signal becomes weaker. On the contrary, in the absence of ALP, AAP cannot reduce Cu²⁺; additions of Cu²⁺ and TH result in a dramatic increase of the fluorescent signal. The sensing strategy displays brilliant sensitivity with a detection limit of 0.08 U/L, and the detection is linear in the concentration range of 0.1 to 100 U/L. This approach was successfully applied to ALP activity in human serum samples, indicating that it is reliable and may be applied to the clinical diagnosis of ALP-related diseases.

An Integral Recognition and Signaling for Electrochemical Assay of Protein Kinase Activity and Inhibitor by Reduced Graphene Oxide-Polydopamine-Silver Nanoparticle-Ti4+ Nanocomposite

A novel electrochemical biosensing method for protein kinase (PKA) activity was demonstrated by using a reduced graphene oxide-polydopamine-silver nanoparticle-Ti4+ (rGO-PDA-AgNPs-Ti4+) nanocomposite. The obtained nanocomposite possessed an integral capability for phosphopeptide recognition and signal readout. The polydopamine modified reduced graphene oxide (rGO-PDA) was firstly prepared based on a self-polymerization method of dopamine. The silver ions were adsorbed onto polydopamine (PDA) layer and directly reduced into silver nanoparticles (AgNPs), which was used for electrochemical signal reporting. Then, the Ti4+ cations were attached onto the PDA layer for phosphopeptide recognition according to the strong coordination ability of PDA with Ti4+ and phosphate group. The prepared rGO-PDA-AgNPs-Ti4+ nanocomposites were characterized with different methods. The developed rGO-PDA-AgNPs-Ti4+ nanocomposites were then employed for electrochemical analysis of PKA-catalyzed kemptide phosphorylation. The sensitive detection toward PKA activity was realized with an experimental detection limit of about 0.01 U/mL. It may be also extended for the inhibitor evaluation. Thus, it provided a facile and sensitive means for electrochemical analysis of PKA activity and inhibitor screening.

Enhancement of Biosensors by Implementing Photoelectrochemical Processes

Research on biosensors is growing in relevance, taking benefit from groundbreaking knowledge that allows for new biosensing strategies. Electrochemical biosensors can benefit from research on semiconducting materials for energy applications. This research seeks the optimization of the semiconductor-electrode interfaces including light-harvesting materials, among other improvements. Once that knowledge is acquired, it can be implemented with biological recognition elements, which are able to transfer a chemical signal to the photoelectrochemical system, yielding photo-biosensors. This has been a matter of research as it allows both a superior suppression of background electrochemical signals and the switching ON and OFF upon illumination. Effective electrode-semiconductor interfaces and their coupling with biorecognition units are reviewed in this work.

Homogeneous detection of 5-hydroxymethylcytosine based on electrochemiluminescence quenching of g-C3N4/MoS2 nanosheets by ferrocenedicarboxylic acid polymer

A sensitively homogeneous electrochemiluminescence (ECL) method was developed for 5-hydroxymethylcytosine (5hmC) detection using TiO₂/MoS₂/g-C₃N₄/GCE as substrate electrode, where g-C₃N₄ was employed as the ECL active material, the MoS₂ nanosheets were used as co-catalyst, and TiO₂ was adopted as phosphate group capture reagent. To achieve the specific recognition and capture of 5hmC, the covalent reaction between -CH₂OH and -SH was employed under the catalysis of HhaI methyltransferase, in which, -SH functionalized ferrocenedicarboxylic acid polymer (PFc-SH) was prepared as 5hmC capture reagent and ECL signal quencher. Then, based on the interaction between TiO₂ and phosphate group of 5hmC, the target was recognized and captured on electrode, resulting in a decreased ECL response due to the quenching effect of PFc-SH. Under optimal conditions, the biosensor presented the linear range from 0.01 to 500 nM with the detection limit of 3.21 pM (S/N = 3). The steric effect on electrode surface is a bottle-neck issue restricting devised biosensors advancement. In this work, the reaction between 5hmC and PFc was carried out in the solution, which can avoid steric effect on electrode surface to keep the high activity of enzyme. In addition, the biosensor was successfully applied to detect 5hmC in genomic DNA of chicken embryo fibroblast cells and different tissues of rice seedlings.

Electrochemiluminescence biosensor for DNA hydroxymethylation detection based on enzyme-catalytic covalent bonding reaction of -CH2OH and thiol functionalized Fe3O4 magnetic beads

5-Hydroxymethylcytosine (5 hmC) is a novel epigenetic modification that plays an important role in mammalian nuclear reprogramming, regulation of gene activity, and initiation of DNA demethylation. In this paper, an electrochemiluminescence sensor was constructed for 5 hmC detection based on thiol functional Fe₃O₄ magnetic beads and covalent chemical reaction of -CH₂OH in 5 hmC. First, Fe₃O₄ magnetic beads were prepared and modified with thiol. Then, 5 hmC was captured on the surface of the magnetic beads by the reaction between -CH₂OH of 5 hmC and -SH of the thiol-functionalized Fe₃O₄ under the catalysis of DNA methyltransferase (M. HhaI). After that, through a series of reactions, phos-tag-biotin, avidin, and bis(hexafluorophosphate) (Ru (bpy)₂ (phen-5-NH₂) (PF₆)₂) (Ru) were further successively immobilized on the surface of the magnetic beads. More importantly, these reactions were carried out in a solution to ensure the activity of the biomolecules, and further to ensure that the reaction proceeded sufficiently. Finally, an ECL signal was generated by the introduction of Ru. The concentration of 5 hmC presented a good linear relationship with the ECL signal intensity in the range of 0.01-500 nM, and the detection limit was 2.86 pM. Moreover, we also used this method to study the 5 hmC content change in rice seedlings treated with antibiotics and heavy metal composite pollutants, and in chicken embryo fibroblast cell infected with and without avian leukosis virus subgroup J.

Photoelectrochemical assay for DNA hydroxymethylation determination based on the inhibited photoactivity of black TiO2 nanosphere by ZnO

A photoelectrochemical method was proposed for DNA hydroxymethylation determination using black TiO₂ (B-TiO₂) nanosphere as photoactive material and ZnO as photoactivity inhibitor. After hydroxymethylated DNA (5hmC-DNA) was captured on the probe modified B-TiO₂/ITO electrode surface through hybridization, a glycosyl can be then transferred from uridine diphosphoglucose to 5hmC-DNA and formed a covalent structure with -CH₂OH in the presence of T4 β-glucosyltransferase (β-GT). Afterwards, based on a series of covalent reaction, amino functionalized ZnO nanoparticles are further immobilized to the surface of the electrode. Due to the capacity to expend the irradiation light and the photogenerated electron of electron donor, the modified ZnO nanoparticles can result in a decreased photocurrent. The developed method shows wide linear ranges from 0.05-200 nM for hydroxymethylated DNA and 1-220 unit·mL^-1 for T4-β-glucosyltransferase. The corresponding determination limits were 0.013 nM and 0.24 unit·mL^-1, respectively. The enzyme activity inhibited by 4-phenylimidazole was evaluated. This photoelectrochemical method shows high specificity for 5hmC-DNA (compared to 5fC, 5mC, m6A, control) and β-GT (compared to β-AGT, UGT2B7), and shows excellent stability for testing 5hmC (RSD = 2.75%). Graphical abstractSchematic representation of photoelectrochemical method for DNA hydroxymethylation and β-glucosyltransferase detection based on the glycosylation reaction of -CH₂OH in 5-hydroxymethylcytosine and the inhibition activity of ZnO to the photoactivity of black TiO₂ nanospheres.

Photoelectrochemical detection of circulating tumor cells based on aptamer conjugated Cu2O as signal probe

In this work, a sensitive and reliable photoelectrochemical (PEC) biosensor was proposed based on hexagonal carbon nitride tubes (HCNT) as photoactive material for detection of circulating tumor cells (CTCs). Magnetic Fe₃O₄ nanospheres (MNs) and Cu₂O nanoparticles (Cu₂O NPs) were utilized for highly efficient magnetic capture of CTCs and for signal amplification, respectively. First, anti-epithelial cell adhesion molecule (EpCAM) antibody was linked onto MNs for capture and enrichment of CTCs. With the captured MCF-7 coated onto the electrode, the photocurrent intensity of HCNT was decreased due to the steric hindrance derived from MCF-7. Then, when the Cu₂O-aptamer probe was bound onto the CTC surface, the photocurrent intensity was further decreased because Cu₂O NPs competed with HCNT for absorption of exciting light and the aptamer molecules increased the steric hindrance, which leads to significantly decreased photocurrent response, thus realizing dual signal amplification. Using the breast cancer cell MCF-7 as a model, the proposed PEC biosensor displays good performances with a linear range from 3 to 3000 cell mL^-1 and limit of detection down to 1 cell mL^-1. The HCNT-based PEC biosensor shows good performance for detection of CTCs, which may have potential applications in cancer diagnostics and therapeutics.