Synthesis of a Poly-l-Lysine/Black Phosphorus Hybrid for Biosensors

Surface functionalization of two-dimensional nanomaterials beyond graphene: Applications and ecotoxicity

Two dimensional (2D) nanomaterials have emerged as promising candidates in nanotechnology due to their excellent physical, chemical, and electronic properties. However, they also pose challenges such as environmental instability and low biosafety. To address these issues, researchers have been exploring various surface functionalization methods to enhance the performance of 2D nanomaterials in practical applications. Moreover, when released into the environment, these 2D nanomaterials may interact with natural organic matter (NOM). Both intentional surface modification and unintentional environmental corona formation can alter the structure and physicochemical properties of 2D nanomaterials, potentially affecting their ecological toxicity. This review provides a comprehensive overview of covalent functionalization strategies and non-covalent interactions of 2D nanomaterials beyond graphene with organic substances, examining the resultant changes in material properties after modification. Covalent functionalization methods discussed include nucleophilic substitution reactions, addition reactions, condensation, and coordination. Non-covalent interactions are classified by substance type, covering interactions with NOM, in vivo biomolecules, and synthetic compounds. In addition, the review delves into the effects of surface functionalization on the toxicity of 2D nanomaterials to bacteria and algae. This discussion contributes to a foundational understanding for assessing the potential ecological risks associated with 2D nanomaterials.

Functional black phosphorus-based sensors for food safety applications: A review

Food safety has garnered global attention, necessitating advanced methods for the quick and accurate detection of contaminants. Sensors, notable for their ease of use, high sensitivity, and fast analysis, are prominent. Two-dimensional (2D) nanomaterials have been employed to improve sensor performance. Particularly, black phosphorus (BP) stands out with its multifunctional capabilities, attributed to unique layered structure, ultra-high charge mobility, easy surface functionalization, enhanced optical absorption, and tunable direct bandgap. These characteristics suggest that BP could significantly enhance sensor selectivity, sensitivity, and response speed for contaminant detection. Despite numerous studies on BP-based sensors in food safety, few reviews have been comprehensively summarized. Moreover, challenges in BP's preparation and stability restrict its wider use. This paper reviews recent research on BP's role in food safety, covering preparation, passivation, and applications. Through analysis of challenges and prospects, this review aims to provide insightful guidance for upcoming research in this area.

A review of biocompatible polymer-functionalized two-dimensional materials: Emerging contenders for biosensors and bioelectronics applications

Bioelectronics, a field pivotal in monitoring and stimulating biological processes, demands innovative nanomaterials as detection platforms. Two-dimensional (2D) materials, with their thin structures and exceptional physicochemical properties, have emerged as critical substances in this research. However, these materials face challenges in biomedical applications due to issues related to their biological compatibility, adaptability, functionality, and nano-bio surface characteristics. This review examines surface modifications using covalent and non-covalent-based polymer-functionalization strategies to overcome these limitations by enhancing the biological compatibility, adaptability, and functionality of 2D nanomaterials. These surface modifications aim to create stable and long-lasting therapeutic effects, significantly paving the way for the practical application of polymer-functionalized 2D materials in biosensors and bioelectronics. The review paper critically summarizes the surface functionalization of 2D nanomaterials with biocompatible polymers, including g-C3N4, graphene family, MXene, BP, MOF, and TMDCs, highlighting their current state, physicochemical structures, synthesis methods, material characteristics, and applications in biosensors and bioelectronics. The paper concludes with a discussion of prospects, challenges, and numerous opportunities in the evolving field of bioelectronics.

Preparation of electrochemical horseradish peroxidase biosensor with black phosphorene-zinc oxide nanocomposite and their applications

In this work, a novel and sensitive electrochemical biosensor was constructed based on a black phosphorene (BP) and nanosized zinc oxide (ZnO@BP) nanocomposite as a modifier, which was used for the immobilization of horseradish peroxidase (HRP) on a carbon ionic liquid electrode (CILE). The ZnO@BP nanocomposite was synthesized by a simple in situ hydrothermal method with stripped black phosphorus nanoplates and ZnO. The ZnO@BP and HRP-modified electrode was developed by a casting method. ZnO@BP with highly conductivity, large surface area and good biocompatibility could maintain the bioactivity of HRP and accelerate the electron transfer rate. Cyclic voltammetry was used to study the direct electrochemistry of HRP on the Nafion/HRP/ZnO@BP/CILE with the appearance of a pair of distinct redox peaks. The constructed electrochemical HRP biosensor exhibited excellent electrocatalytic effects on the reduction of trichloroacetic acid and sodium nitrite. Real samples were detected with satisfactory results, which demonstrated the potential applications of this electrochemical HRP biosensor.

Ultrasensitive Electrochemical Aptasensing of Malathion Based on Hydroxylated Black Phosphorus/Poly-L-Lysine Composite

A highly sensitive unlabeled electrochemical aptasensor based on hydroxylated black phosphorus/poly-L-lysine (hBP/PLL) composite is introduced herein for the detection of malathion. Poly-L-lysine (PLL) with adhesion and coating properties adhere to the surface of the nanosheets by noncovalent interactions with underlying hydroxylated black phosphorus nanosheets (hBP) to produce the hBP/PLL composite. The as-synthesized hBP/PLL composite bonded to Au nanoparticles (Au NPs) firmly by assembling and using them as a substrate for the aptamer with high specificity as a probe to fabricate the sensor. Under optimal conditions, the linear range of the electrochemical aptasensor was 0.1 pM~1 μM, and the detection limit was 2.805 fM. The electrochemical aptasensor has great selectivity, a low detection limit, and anti-interference, which has potential application prospects in the field of rapid trace detection of pesticide residues.

Nanomaterials for the treatment of bacterial infection by photothermal/photodynamic synergism

In the past few decades, great progress has been made in the field of nanomaterials against bacterial infection. However, with the widespread emergence of drug-resistant bacteria, people try their best to explore and develop new antibacterial strategies to fight bacteria without obtaining or increasing drug resistance. Recently, multi-mode synergistic therapy has been considered as an effective scheme for the treatment of bacterial infections, especially the combination of photothermal therapy (PTT) and photodynamic therapy (PDT) with controllable, non-invasive, small side effects and broad-spectrum antibacterial characteristics. It can not only improve the efficiency of antibiotics, but also do not promote antibiotic resistance. Therefore, multifunctional nanomaterials which combine the advantages of PTT and PDT are more and more used in the treatment of bacterial infections. However, there is still a lack of a comprehensive review of the synergistic effect of PTT and PDT in anti-infection. This review first focuses on the synthesis of synergistic photothermal/photodynamic nanomaterials and discusses the ways and challenges of photothermal/photodynamic synergism, as well as the future research direction of photothermal/photodynamic synergistic antibacterial nanomaterials.

Precision Modification of Monolayer Transition Metal Dichalcogenides via Environmental E-Beam Patterning

Layered Transition Metal Dichalcogenides (TMDs) are an important class of materials that exhibit a wide variety of optoelectronic properties. The ability to spatially tailor their expansive property-space (e.g., conduction behavior, optical emission, surface interactions) is of special interest for applications including, but not limited to, sensing, bioelectronics, and spintronics/valleytronics. Current methods of property modulation focus on the modification of the basal surfaces and edge sites of the TMDs by the introduction of defects, functionalization with organic or inorganic moieties, alloying, heterostructure formation, and phase engineering. A majority of these methods lack the resolution for the development of next-generation nanoscale devices or are limited in the types of functionalities useful for efficient TMD property modification. In this study, we utilize electron-beam patterning on monolayer TMDs (MoSe₂, WSe₂ and MoS₂) in the presence of a pressure-controlled atmosphere of water vapor within an environmental scanning electron microscope (ESEM). A series of parametric studies show local optical and electronic property modification depending on acceleration voltage, beam current, pressure, and electron dose. The ultimate pattern resolution achieved is 67 ± 9 nm. Raman and photoluminescence spectroscopies coupled with Kelvin Probe Force Microscopy reveal electron dose-dependent p-doping in the patterned regions, which we attribute to functionalization from the products of water vapor radiolysis (oxygen and hydroxyl groups). The modulation of the work function through patterning matches well with Density Functional Theory modeling. Finally, post-functionalization of the patterned areas with an organic fluorophore demonstrates a robust method to achieve nanoscale functionalization with high fidelity.

Selection and electrochemical-sensor application of an DNA-aptamer for methyl parathion detection

An aptamer-based electrochemical sensor for methyl parathion (MP) detection is herein reported. The modified magnetic beads-systematic evolution of ligands by enrichment (MB-SELEX) was used to select the MP aptamer. After 14 rounds of selection, the aptamer (MPapta-6) with high affinity for MP was obtained, and its dissociation constant (K_d) was 39.66 ± 14.73 μM. Using the MPapta-6, the ultra-sensitive electrochemical sensor based on PLL-BP and AuNPs was constructed. The linear range of MP was 1-10⁵ pM and detection limit (LOD) was as low as 0.49 pM. In addition, the application of the sensor in water samples was verified, and the recovery rate was 96.6%-103.5%. The results from this study showed that this strategy could be applied in practical detection.

Arginine-modified black phosphorus quantum dots with dual excited states for enhanced electrochemiluminescence in bioanalysis

The electrochemiluminescence (ECL) is generally emitted via radiative transition of singlet or triplet excited state (S₁ or T₁). Herein, an ECL mechanism with the transitions of both S₁ and T₁ of black phosphorus quantum dots (BPQDs) is found, and an arginine (Arg) modification strategy is proposed to passivate the surface oxidation defects of BPQDs, which could modulate the excited states for enhancing the ECL efficiency of BPQDs. The Arg modification leads to greater spatial overlap of highest and lowest occupied molecular orbitals, and spectral shift of radiative transitions, and improves the stability of anion radical of BPQDs. To verify the application of the proposed mechanism, it is used to construct a sensitive method for conveniently evaluating the inhibiting efficiency of cyclo-arginine-glycine-aspartic acid-d-tyrosine-lysine to cell surface integrin by using Arg containing peptide modified BPQDs as signal tag. The dual excited states mediated ECL emitters provide a paradigm for adjustable ECL generation and extend the application of ECL analysis.

Preparation and Application of Electrochemical Horseradish Peroxidase Sensor Based on a Black Phosphorene and Single-Walled Carbon Nanotubes Nanocomposite

To design a new electrochemical horseradish peroxidase (HRP) biosensor with excellent analytical performance, black phosphorene (BP) nanosheets and single-walled carbon nanotubes (SWCNTs) nanocomposites were used as the modifier, with a carbon ionic liquid electrode (CILE) as the substrate electrode. The SWCNTs-BP nanocomposite was synthesized by a simple in situ mixing procedure and modified on the CILE surface by the direct casting method. Then HRP was immobilized on the modified electrode with Nafion film. The electrocatalysis of this electrochemical HRP biosensor to various targets was further explored. Experimental results indicated that the direct electrochemistry of HRP was realized with a pair of symmetric and quasi-reversible redox peaks appeared, which was due to the presence of SWCNTs-BP on the surface of CILE, exhibiting synergistic effects with high electrical conductivity and good biocompatibility. Excellent electrocatalytic activity to trichloroacetic acid (TCA), sodium nitrite (NaNO₂), and hydrogen peroxide (H₂O₂) were realized, with a wide linear range and a low detection limit. Different real samples, such as a medical facial peel solution, the soak water of pickled vegetables, and a 3% H₂O₂ disinfectant, were further analyzed, with satisfactory results, further proving the potential practical applications for the electrochemical biosensor.

Label-Free Aptasensor for Detection of Fipronil Based on Black Phosphorus Nanosheets

A label-free fipronil aptasensor was built based on Polylysine-black phosphorus nanosheets composition (PLL-BPNSs) and Au nanoparticles (AuNPs). A PLL-BP modified glassy carbon electrode (GCE) was fabricated by combining BP NSs and PLL, which included a considerable quantity of -NH₂. Au nanoparticles (AuNPs) were placed onto the GCE, and PLL-BPNSs bonded to Au NPs firmly by assembling. The thiolated primers were then added and fixed using an S-Au bond, and competitive binding of the fipronil aptamer was utilized for fipronil quantitative assessment. The sensor’s performance was evaluated using differential pulse voltammetry (DPV) method. The linear equation is ΔI (μA) = 13.04 logC + 22.35, while linear correlation coefficient R² is 0.998, and detection limit is 74 pg/mL (0.17 nM) when the concentration of fipronil is 0.1 ng/mL–10 μg/mL. This aptasensor can apply to quantitative detection of fipronil.

Black phosphorus nanosheets/poly(allylamine hydrochloride) based electrochemical immunosensor for the selective detection of human epididymis protein 4

In this work, an electrochemical immunosensor based on black phosphorus nanosheets (BPNS)/poly(allylamine hydrochloride) (PAH) nanocomposite modified glassy carbon electrode was developed for the detection of ovarian cancer biomarker HE4. PAH has been applied to retain BPNS in its original honeycomb structure and to anchor biomolecules electrostatically on the transducer surface. The as synthesized nanocomposite was characterized by zeta potential analysis, scanning electron microscopy, x-ray photoelectron spectroscopy, transmission electron microscopy, high-resolution transmission electron microscopy. Subsequently, the performance of the electrochemical immunosensor was evaluated through cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. Under the optimal condition, the developed electrochemical immunosensor permitted to detect HE4 with a linear range of 0.1-300 ng ml^-1and a detection limit of 0.01 ng ml^-1. The developed sensor exhibited good selectivity and specificity to HE4 with negligible interference effect from common biomolecules like bovine serum albumin, lysozyme, protamine, glucose, fructose, hemoglobin and fetal bovine serum. Further, practical application of developed electrochemical immunosensor was demonstrated in spiked human serum which showed satisfactory recovery percentages.

Ultrasensitive dual-signal electrochemical ratiometric aptasensor based on Co-MOFs with intrinsic self-calibration property for Mucin 1

The concentration of tumor biomarker Mucin 1 (MUC 1) is highly related with many diseases, which can be employed for the early diagnosis of cancer. In this paper, an electrochemical ratiometric aptasensor with intrinsic self-calibration property for the detection of MUC 1 is presented. In this paper, Co-MOFs themselves were employed as signal substances. This strategy was fabricated by using gold nanoparticles@black phosphorus (BP) as the substrate on the electrode, followed by modification of DNA nanotetrahedrons (DTN) via Au-S bond. The terminal of DTN contains MUC 1 aptamer. In the presence of MUC 1, the signal of DNA-labeled Co-MOFs can be detected. The current signal of Co-MOFs increased and that of thionine (as reference) was unchanged upon the addition of MUC 1. Thus, an intrinsic self-calibration aptasensor was achieved. In order to simplify the modification procedure, the electrolyte solution thionine was employed as an inner reference probe. Moreover, coupling of the hybridization chain reaction (HCR) with these MOFs signal tags presents an enzyme-free method for signal amplification, endowing the proposed ratiometric biosensor detection with high reproducibility and high sensitivity. The current ratio (I_IR/I_SP) remained stable over 30 individual measurements performed on ten different working electrodes. Even ten repeated scans performed on a single electrode exhibited a constant current ratio. The electrochemical ratiometric aptasensor is highly sensitivity for MUC 1 with the detection limit of 1.34 fM. Our proposed ratiometric sensor has great potential for the detection of cancer-related biomarkers.

Sandwiching Phosphorene with Iron Porphyrin Monolayer for High Stability and Its Biomimetic Sensor to Sensitively Detect Living Cell Released NO

Instability of 2D phosphorene material is the major obstacle for its broad applications. Herein phosphorene is sandwiched with self-assembled iron porphyrin monolayers on both sides (I-Phene) to significantly enhance stability. Iron porphyrin has strong interaction with phosphorene through formation of PFe bonds. The sandwich structure offers excellent stability of phosphorene by both-sided monolayer protections for an intact phosphorene structure more than 40 days under ambient conditions. Meanwhile, the electron transfer between iron porphyrin and phosphorene result in a high oxidation state of Fe, making I-Phene biomimetic sensitivity toward oxidation of nitric oxide (NO) for 2.5 and 4.0 times higher than phosphorene and iron-porphyrin alone, respectively. Moreover, I-Phene exhibits excellent selectivity, a wide detection range, and a low detection limit at a low oxidation potential of 0.82 V, which is comparable with the reported noble metal based biomimetic sensors while ranking the best among all non-noble biomimetic ones. I-Phene is further used for real-time monitoring NO released from cells. This work provides effective approach against phosphorene degrading for outstanding stability, which has universal significance for its various important applications, and holds a great promise for a highly sensitive biomimetic sensor in live-cell assays.

Black phosphorous quantum dots for signal-on cathodic photoelectrochemical aptasensor monoitoring amyloid β peptide

In this paper, a quantitative cathodic photoelectrochemical aptasensor is described by using black phosphorous quantum dots (BPQDs) as photoactive material and assisted by heme as electron acceptor for sensing of amyloid β peptide (Aβ). Specifically, BPQDs were synthesized by solvothermal method and characterized by various techniques. The as-prepared BPQDs were assembled on the transparent indium tin oxide electrode, and the positively charged poly-l-lysine (PLL) was then absorbed onto BPQDs via electronic interaction. Subsequently, the aptamer as the specific recognition element for Aβ oligomer was introduced on the BPQDs-PLL modified electrode. After bound with heme to form Aβ-heme complex, Aβ oligomer was simultaneously captured by the aptamer on the electrode, resulting in an enhanced photocurrent response. Under the optimized conditions, the present PEC sensor reveals a good linear response to Aβ peptide ranging from 1.0 fM to 100 nM with a detection limit of 0.87 fM. The present signal-on cathodic PEC bioassay possesses the potential to create a new paradigm in amplified PEC assays that could provide outstanding performance for bioanalysis.

Two-dimensional biomaterials: material science, biological effect and biomedical engineering applications

To date, nanotechnology has increasingly been identified as a promising and efficient means to address a number of challenges associated with public health. In the past decade, two-dimensional (2D) biomaterials, as a unique nanoplatform with planar topology, have attracted explosive interest in various fields such as biomedicine due to their unique morphology, physicochemical properties and biological effect. Motivated by the progress of graphene in biomedicine, dozens of types of ultrathin 2D biomaterials have found versatile bio-applications, including biosensing, biomedical imaging, delivery of therapeutic agents, cancer theranostics, tissue engineering, as well as others. The effective utilization of 2D biomaterials stems from the in-depth knowledge of structure-property-bioactivity-biosafety-application-performance relationships. A comprehensive summary of 2D biomaterials for biomedicine is still lacking. In this comprehensive review, we aim to concentrate on the state-of-the-art 2D biomaterials with a particular focus on their versatile biomedical applications. In particular, we discuss the design, fabrication and functionalization of 2D biomaterials used for diverse biomedical applications based on the up-to-date progress. Furthermore, the interactions between 2D biomaterials and biological systems on the spatial-temporal scale are highlighted, which will deepen the understanding of the underlying action mechanism of 2D biomaterials aiding their design with improved functionalities. Finally, taking the bench-to-bedside as a focus, we conclude this review by proposing the current crucial issues/challenges and presenting the future development directions to advance the clinical translation of these emerging 2D biomaterials.

Black Phosphorus/Polymers: Status and Challenges

As a newly emerged mono-elemental nanomaterial, black phosphorus (BP) has been widely investigated for its fascinating physical properties, including layer-dependent tunable band gap (0.3-1.5 eV), high ON/OFF ratio (10⁴ ), high carrier mobility (10³ cm² V^-1 s^-1 ), excellent mechanical resistance, as well as special in-plane anisotropic optical, thermal, and vibrational characteristics. However, the instability caused by chemical degradation of its surface has posed a severe challenge for its further applications. A focused BP/polymer strategy has more recently been developed and implemented to hurdle this issue, so at present BP/polymers have been developed that exhibit enhanced stability, as well as outstanding optical, thermal, mechanical, and electrical properties. This has promoted researchers to further explore the potential applications of black phosphorous. In this review, the preparation processes and the key properties of BP/polymers are reviewed, followed by a detailed account of their diversified applications, including areas like optoelectronics, bio-medicine, and energy storage. Finally, in accordance with the current progress, the prospective challenges and future directions are highlighted and discussed.

MXene and black phosphorus based 2D nanomaterials in bioimaging and biosensing: progress and perspectives

Bioimaging and biosensing have garnered interest in early cancer diagnosis due to the ability of gaining in-depth insights into cellular functions and providing a wide range of diagnostic parameters. Emerging 2D materials of multielement MXenes and monoelement black phosphorous nanosheets (BPNSs) with unique intrinsic physicochemical properties such as a tunable bandgap and layer-dependent fluorescence, high carrier mobility and transport anisotropy, efficient fluorescence quenching capability, desirable light absorption and thermoelastic properties, and excellent biocompatibility and biosafety properties provide promising nano-platforms for bioimaging and biosensing applications. In view of the growing attention on the rising stars of the post-graphene age in the progress of bioimaging and biosensing, and their common feature characteristics as well as complementarity for constructing complexes, the main objective of this review is to reveal the recent advances in the design of MXene or BPNS based nanoplatforms in the field of bioimaging and biosensing. The preparation and surface functionalization methods, biosafety, and other important aspects of bioimaging and biosensing applications of MXenes and BPNSs have been assessed systematically, along with highlighting the main challenges in further biomedical application. The review not only focuses on the advancements in 2D materials for use in bioimaging and biosensing but also assesses the possibility of their future potential in bioapplications.

Polyvinylpyrrolidone-assisted solvent exfoliation of black phosphorus nanosheets and electrochemical sensing of p-nitrophenol

Few-layer black phosphorus (BP) has been considered as a rising star of 2D materials, and however, the poor stability heavily limits its application in electrochemical sensing. In this work, a series of BP nanosheets (BPNS) are simply prepared through ultrasonic exfoliation of bulk BP with the assistance of polyvinylpyrrolidone (PVP) in different solvents, including isopropanol (IPA), ethanol (EtOH), N-methyl pyrrolidone (NMP) and dimethylformamide (DMF). It is found that the exfoliation efficiency in IPA and EtOH is much higher than that in DMF and NMP, and moreover, IPA is superior than EtOH. More importantly, PVP effectively improves the exfoliation efficiency and ambient ability of BPNS via forming a protective layer to lower the oxidation of phosphorus. The exfoliated BPNS in the presence of IPA and PVP (PVP@BPNS) possess larger active response area, higher electron-transfer rate and stronger enhancement effects toward the oxidation of p-nitrophenol (4-NP). As a result, the response signal and sensing sensitivity of 4-NP are remarkably improved, and a novel electrochemical method has been developed for 4-NP detection, with a linear range of 0.10-5.0 μM and a detection limit of 28 nM. It is used to measure 4-NP in wastewater samples, and the results are validated by high-performance liquid chromatography.

Poly(α-l-lysine)-based nanomaterials for versatile biomedical applications: Current advances and perspectives

Poly(α-l-lysine) (PLL) is a class of water-soluble, cationic biopolymer composed of α-l-lysine structural units. The previous decade witnessed tremendous progress in the synthesis and biomedical applications of PLL and its composites. PLL-based polymers and copolymers, till date, have been extensively explored in the contexts such as antibacterial agents, gene/drug/protein delivery systems, bio-sensing, bio-imaging, and tissue engineering. This review aims to summarize the recent advances in PLL-based nanomaterials in these biomedical fields over the last decade. The review first describes the synthesis of PLL and its derivatives, followed by the main text of their recent biomedical applications and translational studies. Finally, the challenges and perspectives of PLL-based nanomaterials in biomedical fields are addressed.

Two-Dimensional Nanostructures for Electrochemical Biosensor

Current advancements in the development of functional nanomaterials and precisely designed nanostructures have created new opportunities for the fabrication of practical biosensors for field analysis. Two-dimensional (2D) and three-dimensional (3D) nanomaterials provide unique hierarchical structures, high surface area, and layered configurations with multiple length scales and porosity, and the possibility to create functionalities for targeted recognition at their surface. Such hierarchical structures offer prospects to tune the characteristics of materials-e.g., the electronic properties, performance, and mechanical flexibility-and they provide additional functions such as structural color, organized morphological features, and the ability to recognize and respond to external stimuli. Combining these unique features of the different types of nanostructures and using them as support for bimolecular assemblies can provide biosensing platforms with targeted recognition and transduction properties, and increased robustness, sensitivity, and selectivity for detection of a variety of analytes that can positively impact many fields. Herein, we first provide an overview of the recently developed 2D nanostructures focusing on the characteristics that are most relevant for the design of practical biosensors. Then, we discuss the integration of these materials with bio-elements such as bacteriophages, antibodies, nucleic acids, enzymes, and proteins, and we provide examples of applications in the environmental, food, and clinical fields. We conclude with a discussion of the manufacturing challenges of these devices and opportunities for the future development and exploration of these nanomaterials to design field-deployable biosensors.

Cytocompatibility of stabilized black phosphorus nanosheets tailored by directly conjugated polymeric micelles for human breast cancer therapy

The novel procedure of few-layer black phosphorus (FLBP) stabilization and functionalisation was here proposed. The cationic polymer PLL and non-ionic PEG have been involved into encapsulation of FLBP to allow sufficient time for further nanofabrication process and overcome environmental degradation. Two different spacer chemistry was designed to bind polymers to tumor-homing peptides. The efficiency of functionalisation was examined by RP-HPLC, microscopic (TEM and SEM) and spectroscopic (FT-IR and Raman) techniques as well supported by ab-initio modelling. The cell and dose dependent cytotoxicity of FLBP and its bioconjugates was evaluated against HB2, MCF-7 and MDA-MB-231 cell lines. Functionalisation allowed not only for improvement of environmental stability, but also enhances therapeutic effect by abolished the cytotoxicity of FLBP against HB2 cell line. Moreover, modification of FLBP with PLL caused increase of selectivity against highly aggressive breast cancer cell lines. Results indicate the future prospect application of black phosphorus nanosheets as nanocarrier, considering its unique features synergistically with conjugated polymeric micelles.

Recent advances in black phosphorus-based electrochemical sensors: A review

Since the discovery of liquid-phase-exfoliated black phosphorus (BP) as a field-effect transistor in 2014, BP, with its 2D layered structure, has attracted significant attention, owing to its anisotropic electroconductivity, tunable direct bandgap, extraordinary surface activity, moderate switching ratio, high hole mobility, good biocompatibility, and biodegradability. Several pioneering research efforts have explored the application of BP in different types of electrochemical sensors. This review summarizes the latest synthesis methods, protection strategies, and electrochemical sensing applications of BP and its derivatives. The typical synthesis methods for BP-based crystals, nanosheets, and quantum dots are discussed in detail; the degradation of BP under ambient conditions is introduced; and state-of-the-art protection methodologies for enhancing BP stability are explored. Various electrochemical sensing applications, including chemically modified electrodes, electrochemiluminescence sensors, enzyme electrodes, electrochemical aptasensors, electrochemical immunosensors, and ion-selective electrodes are discussed in detail, along with the mechanisms of BP functionalization, sensing strategies, and sensing properties. Finally, the major challenges in this field are outlined and future research avenues for BP-based electrochemical sensors are highlighted.

Simultaneous electrochemical aptasensing of patulin and ochratoxin A in apple juice based on gold nanoparticles decorated black phosphorus nanomaterial

Simultaneous detection of patulin (PAT) and ochratoxin A (OTA) in food products is in great demand, which can prevent toxins from being exposed to human and animal bodies. However, simultaneous detection of multiple targets still faces a challenge. Herein, we developed a novel electrochemical aptasensor for the simultaneous detection of PAT and OTA in apple juice based on gold nanoparticles decorated black phosphorus (AuNPs-BP) nanomaterial. AuNPs-BP function?/work? as a sensing platform for loading much different electrochemical signal molecules functionalized aptamers. In this context, methylene blue functionalized PAT aptamers (Mb-PAT-aptamers) and ferrocene functionalized OTA aptamers (Fc-OTA-aptamers) have been introduced here to fabricate the aptasensor. Fc close to electrode surface showed a strong signal, whereas Mb was far away from electrode surface so exhibited a weak signal in the absence of OTA and PAT. Two kinds of electrochemical signal changes have been recorded dependent on target of OTA and PAT concentrations. So, simultaneous detection of OTA and PAT is achieved. Under the optimum conditions, using this developed biosensor, PAT and OTA can be quantified at a linearity range of 0.01 × 10^-7 μg·mL^-1 ~ 0.10 μg·mL^-1. In addition, it also has good selectivity, stability and repeatability. For the practical application, it shows promising performance for the simultaneous detection of PAT and OTA in apple juice.

Two dimensional BP@AuNP nanocomposites for photothermal/photodynamic therapy mediated wound disinfection and infected wound healing under a single light source

BP@AuNP nanocomposites can perform photothermal and photodynamic therapies simultaneously and exhibited a synergistic combination of multiple therapies for S. aureus and E. coli under a 650 nm laser.

Surface modification of black phosphorus-based nanomaterials in biomedical applications: Strategies and recent advances

Black phosphorus-based nanomaterials (BPNMs), an emerging member of two-dimensional (2D) nanomaterials, possess excellent physicochemical properties and hold great potential for application in advanced nanomedicines. However, the bare BPNMs easily decrease their biomedical activities due to their degradability and in vivo interactions with biological macromolecules such as plasma proteins, largely restricting their biomedical application. A variety of surface modifications, via chemical, physical or biological approaches, have been developed for BPNMs to avoid these limitations and achieve stable, long-lasting and safe therapeutic effects, thus enlighten the development of the multifunctional BPNMs for more practical application in the field of biomedicine. The present review summarizes the recent advances in the surface modification of BPNMs and the resultant expansion of their biomedical applications. Focus is put on the strategy and method of modification while the effects incurred on the behavior and potential toxicity of BPNMs are also included. The future and challenge of the surface modification of the therapeutic BPNMs are finally discussed.

Two-dimensional materials in biomedical, biosensing and sensing applications

Two-dimensional (2D) materials are at the forefront of materials research. Here we overview their applications beyond graphene, such as transition metal dichalcogenides, monoelemental Xenes (including phosphorene and bismuthene), carbon nitrides, boron nitrides along with transition metal carbides and nitrides (MXenes). We discuss their usage in various biomedical and environmental monitoring applications, from biosensors to therapeutic treatment agents, their toxicity and their utility in chemical sensing. We highlight how a specific chemical, physical and optical property of 2D materials can influence the performance of bio/sensing, improve drug delivery and photo/thermal therapy as well as affect their toxicity. Such properties are determined by crystal phases electrical conductivity, degree of exfoliation, surface functionalization, strong photoluminescence, strong optical absorption in the near-infrared range and high photothermal conversion efficiency. This review conveys the great future of all the families of 2D materials, especially with the expanding 2D materials' landscape as new materials emerge such as germanene and silicene.

Synthesis of a CuNP/chitosan/black phosphorus nanocomposite for non-enzymatic hydrogen peroxide sensing

A copper-chitosan-black phosphorus nanocomposite (CuNPs-Chit-BP) was fabricated by electrochemically depositing copper nanoparticles onto a black phosphorus-modified glassy carbon electrode in chitosan solution. CuNPs demonstrated a uniform distribution on the Chit-BP modified GCE with an average size of 20 nm. Electrochemical methods were used to study the catalytic activity of the CuNPs-Chit-BP nanocomposite toward hydrogen peroxide. The results showed that the synthesized nanocomposite exhibited excellent electrical conductivity, good biocompatibility and highly efficient electrocatalytic activity toward hydrogen peroxide reduction in the range of 10 μM-10.3 mM with a detection limit of 0.390 μM. The present work proposed a new strategy to explore novel BP-based non-enzymatic biosensing platforms.

2D Materials Decorated with Ultrathin and Porous Graphene Oxide for High Stability and Selective Surface Activity

2D black phosphorus (BP) and MXenes have triggered enormous research interest in catalysis, energy storage, and chemical sensing. Unfortunately, the low stability of these materials under practical operating conditions remains a critical bottleneck, particularly as they are prone to oxidization under moisture. In this work, the design and application of stable 2D heterostructures obtained from decorating BP and MXene (Ti₃ C₂ T_x ) with few-layer holey graphene oxide (FHGO) membranes are presented. In the resulting heterostructured systems, FHGO serves as a multifunctional passivation layer that shields BP or MXene from oxidative degradation, while allowing the selective diffusion of target gas molecules through its micropores and toward the underlying 2D material. Through a case study of dilute NO₂ sensing, it is demonstrated that these heterostructures show a greatly enhanced sensing performance under humid conditions, where fast sensing speed and response are consistently observed, and high stability is impressively retained upon repetitive sensing cycles for 1000 min. These results corroborate the efficacy of material decoration with porous FHGO membranes and suggest that this is a generalizable strategy for reliable high-performance applications of 2D materials.

Marriage of black phosphorus and Cu2+ as effective photothermal agents for PET-guided combination cancer therapy

The use of photothermal agents (PTAs) in cancer photothermal therapy (PTT) has shown promising results in clinical studies. The rapid degradation of PTAs may address safety concerns but usually limits the photothermal stability required for efficacious treatment. Conversely, PTAs with high photothermal stability usually degrade slowly. The solutions that address the balance between the high photothermal stability and rapid degradation of PTAs are rare. Here, we report that the inherent Cu2+-capturing ability of black phosphorus (BP) can accelerate the degradation of BP, while also enhancing photothermal stability. The incorporation of Cu2+ into BP@Cu nanostructures further enables chemodynamic therapy (CDT)-enhanced PTT. Moreover, by employing 64Cu2+, positron emission tomography (PET) imaging can be achieved for in vivo real-time and quantitative tracking. Therefore, our study not only introduces an "ideal" PTA that bypasses the limitations of PTAs, but also provides the proof-of-concept application of BP-based materials in PET-guided, CDT-enhanced combination cancer therapy.

Emerging pnictogen-based 2D semiconductors: sensing and electronic devices

Pnictogens are an intensively studied group of monoelemental two-dimensional materials. This group of elements consists of phosphorus, arsenic, antimony, and bismuth. In this group, the elements adopt two different layered structural allotropes, orthorhombic structure with true van der Waals layered interactions and rhombohedral structure, where covalent interactions between layers are also present. The orthorhombic structure is well known for phosphorus and arsenic, and the rhombohedral structure is the most thermodynamically stable allotropic modification of arsenic, antimony, and bismuth. Due to the electronic structure of pnictogen layers and their semiconducting character, these materials have huge application potential for electronic devices such as transistors and sensors including photosensitive devices as well as gas and electrochemical sensors. While photodetection and gas sensing applications are often related to lithography processed materials, chemical sensing proceeds in a liquid environment (either aqueous or non-aqueous) and can be influenced by surface oxidation of these materials. In this review, we explore the current state of pnictogen applications in sensing and electronic devices including transistors, photodetectors, gas sensors, and chemical/electrochemical sensors.

An overview of the optical properties and applications of black phosphorus

Since the year 2014, when scientists first obtained black phosphorus using a sticky tape to peel the layers off, it has attracted tremendous interest as a novel two-dimensional material. After it was successfully produced, its outstanding optical properties have been unveiled. Various applications based on these properties have been reported. This study mainly reviews the unique optical properties and potential applications of black phosphorus. The optical performances of black phosphorus mainly include linear optical properties and nonlinear optical properties. Some examples include the anisotropic optical response, saturable absorption effect and Kerr effect. The researchers found that the nonlinear saturable absorption coefficients of black phosphorus are better than that of MoS₂ and WS₂ from the visible region to the near-infrared region. Compared with graphene, black phosphorus has a better nonlinear saturable absorption performance. After passivation or surface modification, black phosphorus is stable when exposed to oxygen and water. Herein, black phosphorus has the potential to be used in detector/sensors, solar energy harvesting, photocatalysts, optical saturable absorbers in ultrafast lasers, all optical switches, optical modulation, nanomedicine and some others in the near future.

Sensitive field-effect transistor sensors with atomically thin black phosphorus nanosheets

Atomically thin black phosphorus (BP) field-effect transistors have excellent potential for sensing applications. However, commercial scaling of PFET sensors is still in the early stage due to various technical challenges, such as tedious fabrication, low response% caused by rapid oxidation, non-ideal response output (spike/bidirectional), and large device variation due to poor control over layer thickness among devices. Attempts have been made to address these issues. First, a theoretical model for response% dependence on the number of layers is developed to show the role of atomically thin BP for better responses. A position-tracked, selected-area-exfoliation method has been developed to rapidly produce thin BP layers with a narrow distribution (∼1-7 layers), which can harness excellent gate control over the PFET channel. The typical current on/off ratio is in the range of ∼300-500. The cysteine-modified Al2O3-gated PFET sensors show high responses (∼30-900%) toward a wide detection range (∼1-400 ppb) of lead ions in water with a typical response time of ∼10-30 s. A strategy to minimize device variation is proposed by correlating PFETs' on/off ratio with sensitivity parameters. The thickness variation of the gate oxide is investigated to explain non-ideal and ideal response transient kinetics.

Property-Activity Relationship of Black Phosphorus at the Nano-Bio Interface: From Molecules to Organisms

As a novel member of the two-dimensional nanomaterial family, mono- or few-layer black phosphorus (BP) with direct bandgap and high charge carrier mobility is promising in many applications such as microelectronic devices, photoelectronic devices, energy technologies, and catalysis agents. Due to its benign elemental composition (phosphorus), large surface area, electronic/photonic performances, and chemical/biological activities, BP has also demonstrated a great potential in biomedical applications including biosensing, photothermal/photodynamic therapies, controlled drug releases, and antibacterial uses. The nature of the BP-bio interface is comprised of dynamic contacts between nanomaterials (NMs) and biological systems, where BP and the biological system interact. The physicochemical interactions at the nano-bio interface play a critical role in the biological effects of NMs. In this review, we discuss the interface in the context of BP as a nanomaterial and its unique physicochemical properties that may affect its biological effects. Herein, we comprehensively reviewed the recent studies on the interactions between BP and biomolecules, cells, and animals and summarized various cellular responses, inflammatory/immunological effects, as well as other biological outcomes of BP depending on its own physical properties, exposure routes, and biodistribution. In addition, we also discussed the environmental behaviors and potential risks on environmental organisms of BP. Based on accumulating knowledge on the BP-bio interfaces, this review also summarizes various safer-by-design strategies to change the physicochemical properties including chemical stability and nano-bio interactions, which are critical in tuning the biological behaviors of BP. The better understanding of the biological activity of BP at BP-bio interfaces and corresponding methods to overcome the challenges would promote its future exploration in terms of bringing this new nanomaterial to practical applications.

Electrochemiluminescence resonance energy transfer between luminol and black phosphorus nanosheets for the detection of trypsin via the “off–on–off” switch mode

In this work, the electrochemiluminescence behavior of a luminol–H₂O₂ system was studied on a black phosphorus nanosheet modified electrode.

Recent Advances in Chemical Functionalization of 2D Black Phosphorous Nanosheets

Owing to their tunable direct bandgap, high charge carrier mobility, and unique in-plane anisotropic structure, black phosphorus nanosheets (BPNSs) have emerged as one of the most important candidates among the 2D materials beyond graphene. However, the poor ambient stability of black phosphorus limits its practical application, due to the chemical degradation of phosphorus atoms to phosphorus oxides in the presence of oxygen and/or water. Chemical functionalization is demonstrated as an efficient approach to enhance the ambient stability of BPNSs. Herein, various covalent strategies including radical addition, nitrene addition, nucleophilic substitution, and metal coordination are summarized. In addition, efficient noncovalent functionalization methods such as van der Waals interactions, electrostatic interactions, and cation-π interactions are described in detail. Furthermore, the preparations, characterization, and diverse applications of functionalized BPNSs in various fields are recapped. The challenges faced and future directions for the chemical functionalization of BPNSs are also highlighted.

Delivery of Cas13a/crRNA by self-degradable black phosphorus nanosheets to specifically inhibit Mcl-1 for breast cancer therapy

The constructed Cas13a/crRNA complex is delivered into cytoplasm by PBP via endocytosis, followed by endosomal escape based on biodegradation of the PBP, and efficiently knocked down Mcl-1 at transcriptional level for breast cancer therapy.

Black phosphorus nanomaterials as multi-potent and emerging platforms against bacterial infections

Black phosphorus (BP) has attracted research interest due to its excellent physiochemical properties in various biomedical applications. However, challenges remain of establishing BP as a practical nanomaterial platform against bacterial infections caused by hard-to-treat pathogens. This review highlights the novel approaches for functional properties and advantages of BP over currently available two-dimensional nanomaterials for antibacterial activity. The latest research findings regarding BP for antibacterial activity, potential as alternative antibacterial approach to current antibiotics, and its promise for the future platform are also considered. We believe that our discussions and perspectives on current topics will provide researchers with an up-to-date and handy reference to apply BP as a beneficial nanostructured biomaterial to the human health against various bacterial infections.

A new aptamer/black phosphorous interdigital electrode for malachite green detection

Malachite Green (MG), a cationic triphenylmethane dye, has adverse effects on the immune and reproductive system. Thus, it is essential to develop a rapid, sensitive and high-selective method for determination of MG. Black phosphorus (BP) has high charge-carrier mobility (∼1000 cm² V^-1 s^-1) and high adsorption capacity for cationic dyes (i.e. MG) through both electrostatic and hydrophobic interactions. Thus, it potentially plays as a high-sensitive sensing platform for detecting MG. However, BP degrades within 12 h under humid condition, which limits its applications. To overcome this issue, cysteine (CYS) is used for protecting BP from oxidation and ceasing its degradation. To the best of our knowledge, it is the first time that CYS is used to functionalize BP, and a silicon interdigital electrode is fabricated with the functionalized BP and aptamer. The BP-based interdigital electrode shows a lowest detection limit of 0.3 ng L^-1 toward MG. This work provides a new route to prepare a large scale and selective biosensor for MG monitoring on site in future.

Impact of nano-morphology, lattice defects and conductivity on the performance of graphene based electrochemical biosensors

Diverse properties of graphenic materials have been extensively explored to determine properties that make good electrochemical nanomaterial-based biosensors. These are reviewed by critically examining the influence of graphene nano-morphology, lattice defects and conductivity. Stability, reproducibility and fabrication are discussed together with sensitivity and selectivity. We provide an outlook on future directions for building efficient electrochemical biosensors.