Force Spectroscopy Mapping of the Effect of Hydration on the Stiffness and Deformability of Phytoglycogen Nanoparticles

Covalently linked phosphate monoesters on alpha-polyglucans reduce substrate affinity of branching enzymes

Starch and glycogen are α-polyglucans which represent important sources of long- and short-term cellular carbohydrate storage synthesized in living cells. Both polyglucans contain variable, but significant, levels of covalently bound phosphate monoesters whose biological role is likely connected to the regulation of turnover of these storage polymers by promoting water solubility. The amount of α-glucan-bound phosphate found in plant starch appears to be closely related to the average chain length of α-1,4-glucans, and inversely related to the frequency of α-1,6-branch linkages. The enzymes responsible for adding branches to linear α-1,4-glucan chains in starch and glycogen are 1,4-α-glucan: 1,4-α-glucan 6-glucosyl transferases (branching enzymes). In this study, glucan bound phosphate was shown to reduce the affinity of branching enzymes for α-glucan substrates. Plant starch branching enzymes and glycogen branching enzymes from various prokaryotic and eukaryotic sources showed reduced substrate affinities in native gels as the α-glucan phosphate content was increased. The substrate affinities of all branching enzymes tested showed an inverse linear relationship with α-glucan phosphate content. The possible biological significance of this phenomenon is discussed in relation to known models of starch structure in plants and specific glycogen storage diseases in mammals.

Amyloid Nanofibril-Assisted Spray Drying of Crumpled Supraparticles

Nanofibrils are known to improve the cohesion of supraparticle (SP) assemblies. However, tailoring the morphology of SPs using nanofibrillar additives is not well developed. Herein, β-lactoglobulin amyloid nanofibrils (ANFs) are investigated as means to impart morphological control over the assembly process of spray-dried SPs composed of 10-100 nm silica nanoparticles (SiNPs). Phytoglycogen (PG) and silver nanowires (AgNWs) are used to assess the influence of building block softness and aspect ratio, respectively. The results demonstrate that ANFs promote the onset of structural arrest during the particle consolidation enabling the preparation of corrugated SP morphologies. The critical ANF loading required to induce SP corrugation increases by roughly 1 vol% for every 10-nm increase in SiNP diameter, while the ensuing ANF network density decreases with SiNP volume fraction and increases with SiNP diameter. Results imply that ANF length starts to become influential when it approaches the SiNP diameter. ANFs display a reduced effectiveness in altering soft PG SP morphology compared with hard SiNPs of comparable size. In SiNP-AgNW SPs, ANFs induce a toroid-to-corrugated morphology transformation for sufficiently large SPs and small SiNPs. The results illustrate that ANFs are effective additives for the morphological engineering of spray-dried SPs important for numerous applications.

Solubilization of Hydrophobic Astaxanthin in Water by Physical Association with Phytoglycogen Nanoparticles

Astaxanthin (AXT) is a xanthophyll carotenoid with reported health benefits. Realizing its potential as a bioactive is challenging because of its extremely poor solubility in water. We describe a method to improve the effective solubility of AXT in water through its physical association with phytoglycogen (PG), which is produced in sweet corn as compact, highly branched nanoparticles. We combine PG in water with AXT in acetone, evaporate the acetone, and lyophilize. The result is an AXT-PG complex that can be readily redispersed in water, resulting in stable aqueous dispersions. By characterizing the UV-vis absorbance due to different aggregation states of AXT in the AXT-PG complex, we determined the maximum loading of AXT onto PG to be ∼10% by mass. Our results demonstrate the promise of using PG as a solubilizing agent for hydrophobic compounds in water.

Building respirable powder architectures: utilizing polysaccharides for precise control of particle morphology for enhanced pulmonary drug delivery

INTRODUCTION

Dry powder inhaler (DPI) formulations are gaining attention as universal formulations with applications in a diverse range of drug formulations. The practical application of DPIs to pulmonary drugs requires enhancing their delivery efficiency to the target sites for various treatment modalities. Previous reviews have not explored the relation between particle morphology and delivery to different pulmonary regions. This review introduces new approaches to improve targeted DPI delivery using novel particle design such as supraparticles and metal-organic frameworks based on cyclodextrin.

AREAS COVERED

This review focuses on the design of DPI formulations using polysaccharides, promising excipients not yet approved by regulatory agencies. These excipients can be used to design various particle morphologies by controlling their physicochemical properties and manufacturing methods.

EXPERT OPINION

Challenges associated with DPI formulations include poor access to the lungs and low delivery efficiency to target sites in the lung. The restricted applicability of typical excipients contributes to their limited use. However, new formulations based on polysaccharides are expected to establish a technological foundation for the development of DPIs capable of delivering modalities specific to different lung target sites, thereby enhancing drug delivery.

Quantification and biological evaluation of ZnxFe3-xO4 nanoparticle stiffness in a drug delivery system of MCF-7 cancer cells

The delivery of nanoparticles (NPs) to tumors remains challenging despite significant advancements in drug delivery technologies. Addressing this issue requires the establishment of quantitative and reliable criteria to evaluate the cellular absorption of NPs. The mechanical characteristics of NPs and their interaction with cells play a crucial role in cellular drug delivery by influencing cellular internalization. In particular, NPs' stiffness has emerged as a key factor affecting cellular uptake and viability. In this study, we synthesized ZnxFe3-xO4 NPs with varying Zn doping concentrations and conducted an extensive measurement process to investigate the impact of NP stiffness on cellular uptake and the viability of cancerous cells. Initially, the stiffness of the NPs was measured using two methods: single-molecule force spectrometry of atomic force microscopy (SMFS-AFM) and cation distribution as chemical structure analysis. The influence of NP stiffness on intracellular behavior was examined by assessing cellular uptake and viability at different time points during the incubation period. The results obtained from both stiffness measurement methods exhibited consistent trends. NPs with higher stiffness exhibited enhanced cellular uptake but exhibited reduced cellular viability compared to the lower-stiffness NPs. Our findings provide valuable insights into the influence of Zn doping concentration on the mechanical properties of ZnxFe3-xO4 NPs and their consequential impacts on cellular internalization. This study contributes to an improved comprehension of the mechanisms underlying cellular uptake and facilitates advancements in the field of drug transport, thereby enhancing the efficiency of NP-based drug delivery.

Advanced dendritic glucan-derived biomaterials: From molecular structure to versatile applications

There is considerable interest in the development of advanced biomaterials with improved or novel functionality for diversified applications. Dendritic glucans, such as phytoglycogen and glycogen, are abundant biomaterials with highly branched three-dimensional globular architectures, which endow them with unique structural and functional attributes, including small size, large specific surface area, high water solubility, low viscosity, high water retention, and the availability of numerous modifiable surface groups. Dendritic glucans can be synthesized by in vivo biocatalysis reactions using glucosyl-1-phosphate as a substrate, which can be obtained from plant, animal, or microbial sources. They can also be synthesized by in vitro methods using sucrose or starch as a substrate, which may be more suitable for large-scale industrial production. The large numbers of hydroxyl groups on the surfaces of dendritic glucan provide a platform for diverse derivatizations, including nonreducing end, hydroxyl functionalization, molecular degradation, and conjugation modifications. Due to their unique physicochemical and functional attributes, dendritic glucans have been widely applied in the food, pharmaceutical, biomedical, cosmetic, and chemical industries. For instance, they have been used as delivery systems, adsorbents, tissue engineering scaffolds, biosensors, and bioelectronic components. This article reviews progress in the design, synthesis, and application of dendritic glucans over the past several decades.

Harnessing the polymer-particle duality of ultra-soft nanogels to stabilise smart emulsions

Micro- and nanogels are widely used to stabilise emulsions and simultaneously implement their responsiveness to the external stimuli. One of the factors that improves the emulsion stability is the nanogel softness. Here, we study how the softest nanogels that can be synthesised with precipitation polymerisation of N-isopropylacrylamide (NIPAM), the ultra-low crosslinked (ULC) nanogels, stabilise oil-in-water emulsions. We show that ULC nanogels can efficiently stabilise emulsions already at low mass concentrations. These emulsions are resistant to droplet flocculation, stable against coalescence, and can be easily broken upon an increase in temperature. The resistance to flocculation of the ULC-stabilised emulsion droplets is similar to the one of emulsions stabilised by linear pNIPAM. In contrast, the stability against coalescence and the temperature-responsiveness closely resemble those of emulsions stabilised by regularly crosslinked pNIPAM nanogels. The reason for this combination of properties is that ULC nanogels can be thought of as colloids in between flexible macromolecules and particles. As a polymer, ULC nanogels can efficiently stretch at the interface and cover it uniformly. As a regularly crosslinked nanogel particle, ULC nanogels protect emulsion droplets against coalescence by providing a steric barrier and rapidly respond to changes in external stimuli thus breaking the emulsion. This polymer-particle duality of ULC nanogels can be exploited to improve the properties of emulsions for various applications, for example in heterogeneous catalysis or in food science.

Tuning the Phytoglycogen Size and Aggregate Structure with Solvent Quality: Influence of Water-Ethanol Mixtures Revealed by X-ray and Light Scattering Techniques

Phytoglycogen (PG) is a hyperbranched polysaccharide with promising properties for biomedical and pharmaceutical applications. Herein, we explore the size and structure of sweet corn PG nanoparticles and their aggregation in water-ethanol mixtures up to the ethanol mole fraction x_EtOH = 0.364 in dilute concentrations using small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS) measurements. Between 0 ≤ x_EtOH ≤ 0.129, the conformation of PG contracts gradually decreasing up to ca. 80% in hydrodynamic volume, when measured shortly after ethanol addition. For equilibrated PG dispersions, SAXS suggests a lower PG volume decrease between 19 and 67% at the corresponding x_EtOH range; however, the inflection point of the DLS volume contraction coincides with the onset of reduced colloidal stability observed with SAXS. Up to x_EtOH = 0.201, the water-ethanol mixtures yield labile fractal and globular aggregates, as evidenced by their partial breakup under mild ultrasonic treatment, demonstrated by the decrease in their hydrodynamic size. Between 0.235 ≤ x_EtOH ≤ 0.364, PG nanoparticles form larger, more cohesive globular aggregates that are less affected by ultrasonic shear forces.

Interior of glycogen probed by pyrene excimer fluorescence

A glycogen sample from oyster (O) and another from corn (C) were fluorescently labeled with 1-pyrenebutyric acid to yield two series of pyrene-labeled glycogen samples (Py-Glycogen(O/C)). Analysis of the time-resolved fluorescence (TRF) measurements of the Py-Glycogen(O/C) dispersions in dimethyl sulfoxide yielded the maximum number (<N_blob^exp>) of anhydroglucose units (AGUs), that could separate two pyrene-labeled AGUs and still allow efficient pyrene excimer formation (PEF) between an excited and a ground-state pyrene. Molecular mechanics optimizations (MMOs) were conducted on a lattice of hexagonally close packed oligosaccharide helices to determine how the theoretical N_blob^theo varied as a function of the lattice density. Comparing <N_blob^exp> and <N_blob^theo>, obtained after integrating N_blob^theo along the local density profile ρ(r) across the glycogen particles, led to the conclusion that ρ(r) took a maximum value at the center of the glycogen particles contrary to expectations based on the Tier Model.

Binding Affinity of Concanavalin A to Native and Acid-Hydrolyzed Phytoglycogen Nanoparticles

Phytoglycogen (PG) is a polysaccharide produced in the kernels of sweet corn as soft, highly branched, compact nanoparticles. Its tree-like or dendritic architecture, combined with a high-safety profile, makes PG nanoparticles attractive for use in biological applications, many of which rely on the association or binding of small biomolecules. We have developed a methodology to functionalize surface plasmon resonance (SPR) sensor surfaces with PG nanoparticles, and we demonstrate the utility of the PG-functionalized SPR sensor by measuring the binding affinity of the tetrameric concanavalin A (ConA) protein to both native PG nanoparticles and smaller, softer acid-hydrolyzed PG nanoparticles. We measure comparable values of the equilibrium association constant K for native and acid-hydrolyzed PG, with a slightly smaller value for the acid-hydrolyzed particles that we attribute to unfavorable lateral interactions between the tetrameric subunits of ConA due to the increase in surface curvature of the smaller acid-hydrolyzed PG particles. We also use infrared reflection-absorption spectroscopy (IRRAS) to show that ConA maintains a large fraction of its native conformation, and thus its bioactivity, upon binding to PG, representing an important step toward the realization of PG as a novel bioactive delivery vehicle.

Transition in the Glassy Dynamics of Melts of Acid-Hydrolyzed Phytoglycogen Nanoparticles

The deformability, responsiveness, and tunability of soft nanoparticles (NPs) offer unique opportunities to learn about their complex properties and the interactions between particles. In the present study, we provide new insights into the physical properties of phytoglycogen (PG) NPs, which are soft, compact particles with a dendritic architecture that are produced in the kernels of sweet corn. In particular, we study PG NPs modified using acid hydrolysis, which not only reduces their diameter but also alters their stiffness, internal structure, and the interactions between particles in aqueous dispersions. We used steady shear rheology to determine the dependence of the relative zero-shear viscosity η_r of aqueous dispersions of acid-hydrolyzed PG NPs on the effective volume fraction ϕ_eff, which indicated a reduction in stiffness of the particles relative to that of native PG NPs. We quantified this difference by analyzing the nature of the colloidal glasses formed at high ϕ_eff. We measured a smaller value of the fragility index m for acid-hydrolyzed PG NP glasses than that for native PG NP glasses, indicating that acid-hydrolyzed PG NPs form stronger glasses and are therefore softer than native PG NPs. Unlike the native PG NPs, we observed a distinctive change in the character of the glass transition of the acid-hydrolyzed PG NPs as ϕ_eff was increased above ϕ_eff∼1: a crossover in the dependence of η_r on ϕ_eff from Vogel-Fulcher-Tammann behavior to a more gradual, Arrhenius-like behavior. By expressing the steady shear and oscillatory rheology data in terms of generalized Péclet numbers, we obtained collapse of the data onto master curves. We interpret this result in terms of the acid-hydrolyzed PG NPs predominantly interpenetrating neighboring particles at large ϕ_eff, for which fluctuations of the outer chains enhance the mobility of the particles and make α-relaxation times τ_α experimentally accessible.

Microgels react to force: mechanical properties, syntheses, and force-activated functions

Microgels are colloidal polymer networks with high molar mass and properties between rigid particles, flexible macromolecules, and micellar aggregates. Their unique stimuli-responsiveness in conjunction with their colloidal phase behavior render them useful for many applications ranging from engineering to biomedicine. In many scenarios either the microgel's mechanical properties or its interactions with mechanical force play an important role. Here, we firstly explain microgel mechanical properties and how these are measured by atomic force microscopy (AFM), then we equip the reader with the synthetic background to understand how specific architectures and chemical functionalities enable these mechanical properties, and eventually we elucidate how the interaction of force with microgels can lead to the activation of latent functionality. Since the interaction of microgels with force is a multiscale and multidisciplinary subject, we introduce and interconnect the different research areas that contribute to the understanding of this emerging field in this Tutorial Review.