Polymer Micelles vs Polymer-Lipid Hybrid Vesicles: A Comparison Using RAW 264.7 Cells

Composition-dependent tunability of the cell interactions of hybrid lipid - block copolymer vesicles

Hybrid vesicles composed of phospholipids and block copolymers are of interest for a wide range of applications due to the broad tunability of their material properties that can synergistically combine desirable properties of liposomes and polymersomes. A major application of vesicles in biotechnology has been in the field of drug delivery, where understanding and controlling vesicle interactions with cells is of vital importance. Here, we investigate the tunability of hybrid vesicle interaction with three distinct cell lines through modulating non-specific interactions. We formulate vesicles composed of three different constituents, the zwitterionic lipid 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC), the cationic lipid 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and the amphiphilic diblock copolymer Poly(1,2-butadiene)-b-poly(ethylene oxide) (PBD22-PEO14). This enables the tunability of cell interactions through electrostatic attraction to anionic cellular membranes and steric repulsion from the polymeric PEO brush layer. We establish a microfluidic flow protocol to enhance the reproducibility of vesicle-cell interactions by controlling the hydrodynamic stresses during incubation and washing steps. We demonstrate a high degree of tunability of cell interactions and low cytotoxicity across the three cell lines investigated (HFFF2, HEK293, HepG2). These initial findings offer critical insights into the engineering of hybrid vesicles and their potential applications in drug delivery.

FRET-based analysis on the fate of liposome and cyclodextrin@liposome nanocomposites from ocular surface to the posterior segment of the eye

Investigating the structural integrity of nanocarriers in vivo is vital for exploring the fate of nanocarriers from ocular surface to the posterior segment of the eye. Most of the published studies adopted the structural integrity ratio of nanocarriers to determine the fate of them, which lacked scientific support. In this study, two methods were used to explore the factors which affected the structural integrity of liposomes. A new method with the standard curve of FRET fluorescence intensity and carbocyanine 7 (Cy7) content was drawn for the first time. Secondly, we used the traditional method of drawing the standard curve of FRET fluorescence efficiency and structural integrity ratios. The results showed that liposomes with particle size about 120 nm, positively charged, polyethyleneglycol5000 (PEG5000) and glycine sarcosine (GS) modified had the highest Cy7 content in rabbit tissues. When the dosage of Cy7 was 25 μg, at 60 min, the content of Cy7 in intact liposomes and the structural integrity ratio of liposomes in sclera was 210.5 ± 14.9 ng and 19.8 ± 5.3 %, respectively. Compared with the structural integrity ratio, the Cy7 content in the intact carrier could better estimate the fate of nanocarriers in vivo scientifically. On this basis, the fate of dual-carrier nanocomposites and the inner cyclodextrin complexes in vivo was investigated. The intact cyclodextrin complexes could reach choroid-retina with the protection of outer liposomes. The structural integrity ratios of liposomes were also studied after crossing human conjunctival epithelial cells (HConEpiC) monolayer, but in vitro cellular experiments could not simulate the real situation in vivo. Finally, the tissue distribution of nanocomposites was studied in rabbit eyes. The concentration of dexamethasone (Dex) in choroid-retina was 158 ± 23 ng/g after 3 h, which exhibited better drug delivery ability compared with our previous study. Overall, the present study provides a new scientific method to estimate the structural integrity in vivo, which is beneficial for the rational design of drug delivery systems with more structural integrity in vivo and higher drug delivery efficiency.

Engineered Lipids for Intracellular Reactive Oxygen Species Scavenging in Steatotic Hepatocytes

Intracellular reactive oxygen species (ROS) in steatotic cells pose a problem due to their potential to cause oxidative stress and cellular damage. Delivering engineered phospholipids to intracellular lipid droplets in steatotic hepatic cells, using the cell's inherent intracellular lipid transport mechanisms are investigated. Initially, it is shown that tail-labeled fluorescent lipids assembled into liposomes are able to be transported to intracellular lipid droplets in steatotic HepG2 cells and HHL-5 cells. Further, an antioxidant, an EUK salen-manganese derivative, which has superoxide dismutase-like and catalase-like activity, is covalently conjugated to the tail of a phospholipid and formulated as liposomes for administration. Steatotic HepG2 cells and HHL-5 cells incubated with these antioxidant liposomes have lower intracellular ROS levels compared to untreated controls and non-covalently formulated antioxidants. This first proof-of-concept study illustrates an alternative strategy to equip native organelles in mammalian cells with engineered enzyme activity.

Poly(Sitosterol)-Based Hydrophobic Blocks in Amphiphilic Block Copolymers for the Assembly of Hybrid Vesicles

Amphiphilic block copolymer and lipids can be assembled into hybrid vesicles (HVs), which are an alternative to liposomes and polymersomes. Block copolymers that have either poly(sitostryl methacrylate) or statistical copolymers of sitosteryl methacrylate and butyl methacrylate as the hydrophobic part and a poly(carboxyethyl acrylate) hydrophilic segment are synthesized and characterized. These block copolymers assemble into small HVs with soybean L-α-phosphatidylcholine (soyPC), confirmed by electron microscopy and small-angle X-ray scattering. The membrane's hybrid nature is illustrated by fluorescence resonance energy transfer between labeled building blocks. The membrane packing, derived from spectra when using Laurdan as an environmentally sensitive fluorescent probe, is comparable between small HVs and the corresponding liposomes with molecular sitosterol, although the former show indications of transmembrane asymmetry. Giant HVs with homogenous distribution of the block copolymers and soyPC in their membranes are assembled using the electroformation method. The lateral diffusion of both building blocks is slowed down in giant HVs with higher block copolymer content, but their permeability toward (6)-carboxy-X-rhodamine is higher compared to giant vesicles made of soyPC and molecular sitosterol. This fundamental effort contributes to the rapidly expanding understanding of the integration of natural membrane constituents with designed synthetic compounds to form hybrid membranes.

Unveiling the Performance of Co-Assembled Hybrid Nanocarriers: Moving towards the Formation of a Multifunctional Lipid/Random Copolymer Nanoplatform

Despite the appealing properties of random copolymers, the use of these biomaterials in association with phospholipids is still limited, as several aspects of their performance have not been investigated. The aim of this work is the formulation of lipid/random copolymer platforms and the comprehensive study of their features by multiple advanced characterization techniques. Both biomaterials are amphiphilic, including two phospholipids (1,2-dioctadecanoyl-sn-glycero-3-phosphocholine (DSPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)) and a statistical copolymer of oligo (ethylene glycol) methyl ether methacrylate (OEGMA) and 2-(diisopropylamino) ethyl methacrylate (DIPAEMA). We examined the design parameters, including the lipid composition, the % comonomer ratio, and the lipid-to-polymer ratio that could be critical for their behavior. The structures were also probed in different conditions. To the best of the authors' knowledge, this is the first time that P(OEGMA-co-DIPAEMA)/lipid hybrid colloidal dispersions have been investigated from a membrane mechanics, biophysical, and morphological perspective. Among other parameters, the copolymer architecture and the hydrophilic to hydrophobic balance are deemed fundamental parameters for the biomaterial co-assembly, having an impact on the membrane's fluidity, morphology, and thermodynamics. Exploiting their unique characteristics, the most promising candidates were utilized for methotrexate (MTX) loading to explore their encapsulation capability and potential antitumor efficacy in vitro in various cell lines.

Advances in block copolymer-phospholipid hybrid vesicles: from physical-chemical properties to applications

Hybrid vesicles, made of lipids and amphiphilic block copolymers, have become increasingly popular thanks to their versatile properties that enable the construction of intricate membranes mimicking cellular structures. This tutorial review gives an overview over the different hybrid vesicle designs, and provides a detailed analysis of their properties, including their composition, membrane fluidity, membrane homogeneity, permeability, stability. The review puts emphasis on the application of these hybrid vesicles in bottom-up synthetic biology and aims to offer an overview of design guidelines, particularly focusing on composition, to eventually realize the intended applications of these hybrid vesicles.

Deciphering the Lipid-Random Copolymer Interactions and Encoding Their Properties to Design a Hybrid System

Lipid/copolymer colloidal systems are deemed hybrid materials with unique properties and functionalities. Their hybrid nature leads to complex interfacial phenomena, which have not been fully encoded yet, navigating their properties. Moving toward in-depth knowledge of such systems, a comprehensive investigation of them is imperative. In the present study, hybrid lipid/copolymer structures were fabricated and examined by a gamut of techniques, including dynamic light scattering, fluorescence spectroscopy, cryogenic transmission electron microscopy, microcalorimetry, and high-resolution ultrasound spectroscopy. The biomaterials that were mixed for this purpose at different ratios were 1,2-dioctadecanoyl-sn-glycero-3-phosphocholine and four different linear, statistical (random) amphiphilic copolymers, consisting of oligo(ethylene glycol) methyl ether methacrylate as the hydrophilic comonomer and lauryl methacrylate as the hydrophobic one. The colloidal dispersions were studied for lipid/copolymer interactions regarding their physicochemical, morphological, and biophysical behavior. Their membrane properties and interactions with serum proteins were also studied. The aforementioned techniques confirmed the hybrid nature of the systems and the location of the copolymer in the structure. More importantly, the random architecture of the copolymers, the hydrophobic-to-hydrophilic balance of the nanoplatforms, and the lipid-to-polymer ratio are highlighted as the main design-influencing factors. Elucidating the lipid/copolymer interactions would contribute to the translation of hybrid nanoparticle performance and, thus, their rational design for multiple applications, including drug delivery.

Astrocytes in Paper Chips and Their Interaction with Hybrid Vesicles

The role of astrocytes in brain function has received increased attention lately due to their critical role in brain development and function under physiological and pathophysiological conditions. However, the biological evaluation of soft material nanoparticles in astrocytes remains unexplored. Here, the interaction of crosslinked hybrid vesicles (HVs) and either C8-D1A astrocytes or primary astrocytes cultured in polystyrene tissue culture or floatable paper-based chips is investigated. The amphiphilic block copolymer poly(cholesteryl methacrylate)-block-poly(2-carboxyethyl acrylate) (P1) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine lipids are used for the assembly of HVs with crosslinked membranes. The assemblies show no short-term toxicity towards the C8-D1A astrocytes and the primary astrocytes, and both cell types internalize the HVs when cultured in 2D cell culture. Further, it is demonstrated that both the C8-D1A astrocytes and the primary astrocytes could mature in paper-based chips with preserved calcium signaling and glial fibrillary acidic protein expression. Last, it is confirmed that both types of astrocytes could internalize the HVs when cultured in paper-based chips. These findings lay out a fundamental understanding of the interaction between soft material nanoparticles and astrocytes, even when primary astrocytes are cultured in paper-based chips offering a 3D environment.