Enhanced Skull Bone Regeneration by Sustained Release of BMP-2 in Interpenetrating Composite Hydrogels

Development and Characterization of Heparin-Containing Hydrogel/3D-Printed Scaffold Composites for Craniofacial Reconstruction

Regeneration of cartilage and bone tissues remains challenging in tissue engineering due to their complex structures, and the need for both mechanical support and delivery of biological repair stimuli. Therefore, the goal of this study was to develop a composite scaffold platform for anatomic chondral and osteochondral repair using heparin-based hydrogels to deliver small molecules within 3D-printed porous scaffolds that provide structure, stiffness, and controlled biologic delivery. We designed a mold-injection system to combine hydrolytically degradable hydrogels and 3D-printed scaffolds that could be employed rapidly (< 30 min) in operating room settings (~23 °C). Micro-CT analysis demonstrated the effectiveness of our injection system through homogeneously distributed hydrogel within the pores of the scaffolds. Hydrogels and composite scaffolds exhibited efficient loading (~94%) of a small positively charged heparin-binding molecule (crystal violet) with sustained release over 14 days and showed high viability of encapsulated porcine chondrocytes over 7 days. Compression testing demonstrated nonlinear viscoelastic behavior where tangent stiffness decreased with scaffold porosity (porous scaffold tangent stiffness: 70%: 4.9 MPa, 80%: 1.5 MPa, and 90%: 0.20 MPa) but relaxation was not affected. Lower-porosity scaffolds (70%) showed stiffness similar to lower ranges of trabecular bone (4-8 MPa) while higher-porosity scaffolds (80% and 90%) showed stiffness similar to auricular cartilage (0.16-2 MPa). Ultimately, this rapid composite scaffold fabrication method may be employed in the operating room and utilized to control biologic delivery within load-bearing scaffolds.

Injectable composite hydrogels embedded with gallium-based liquid metal particles for solid breast cancer treatment via chemo-photothermal combination

Photothermal therapy (PTT) holds great promise as a cancer treatment modality by generating localized heat at the tumor site. Among various photothermal agents, gallium-based liquid metal (LM) has been widely used as a new photothermal-inducible metallic compound due to its structural transformability. To overcome limitations of random aggregation and dissipation of administrated LM particles into a human body, we developed LM-containing injectable composite hydrogel platforms capable of achieving spatiotemporal PTT and chemotherapy. Eutectic gallium-indium LM particles were first stabilized with 1,2-Distearoyl-sn‑glycero-3-phosphoethanolamine (DSPE) lipids. They were then incorporated into an interpenetrating hydrogel network composed of thiolated gelatin conjugated with 6-mercaptopurine (MP) chemodrug and poly(ethylene glycol)-diacrylate. The resulted composite hydrogel exhibited sufficient capability to induce MDA-MB-231 breast cancer cell death through a multi-step mechanism: (1) hyperthermic cancer cell death due to temperature elevation by near-infrared laser irradiation via LM particles, (2) leakage of glutathione (GSH) and cleavage of disulfide bonds due to destruction of cancer cells. As a consequence, additional chemotherapy was facilitated by GSH, leading to accelerated release of MP within the tumor microenvironment. The effectiveness of our composite hydrogel system was evaluated both in vitro and in vivo, demonstrating significant tumor suppression and killing. These results demonstrate the potential of this injectable composite hydrogel for spatiotemporal cancer treatment. In conclusion, integration of PTT and chemotherapy within our hydrogel platform offers enhanced therapeutic efficacy, suggesting promising prospects for future clinical applications. STATEMENT OF SIGNIFICANCE: Our research pioneers a breakthrough in cancer treatments by developing an injectable hydrogel platform incorporating liquid metal (LM) particle-mediated photothermal therapy and 6-mercaptopurine (MP)-based chemotherapy. The combination of gallium-based LM and MP achieves synergistic anticancer effects, and our injectable composite hydrogel acts as a localized reservoir for specific delivery of both therapeutic agents. This platform induces a multi-step anticancer mechanism, combining NIR-mediated hyperthermic tumor death and drug release triggered by released glutathione from damaged cancer populations. The synergistic efficacy validated in vitro and in vivo studies highlights significant tumor suppression. This injectable composite hydrogel with synergistic therapeutic efficacy holds immense promise for biomaterial-mediated spatiotemporal treatment of solid tumors, offering a potent targeted therapy for triple negative breast cancers.

MicroRNA-200c Release from Gelatin-Coated 3D-Printed PCL Scaffolds Enhances Bone Regeneration

The fabrication of clinically relevant synthetic bone grafts relies on combining multiple biodegradable biomaterials to create a structure that supports the regeneration of defects while delivering osteogenic biomolecules that enhance regeneration. MicroRNA-200c (miR-200c) functions as a potent osteoinductive biomolecule to enhance osteogenic differentiation and bone formation; however, synthetic tissue-engineered bone grafts that sustain the delivery of miR-200c for bone regeneration have not yet been evaluated. In this study, we created novel, multimaterial, synthetic bone grafts from gelatin-coated 3D-printed polycaprolactone (PCL) scaffolds. We attempted to optimize the release of pDNA encoding miR-200c by varying gelatin types, concentrations, and polymer crosslinking materials to improve its functions for bone regeneration. We revealed that by modulating gelatin type, coating material concentration, and polymer crosslinking, we effectively altered the release rates of pDNA encoding miR-200c, which promoted osteogenic differentiation in vitro and bone regeneration in a critical-sized calvarial bone defect animal model. We also demonstrated that crosslinking the gelatin coatings on the PCL scaffolds with low-concentration glutaraldehyde was biocompatible and increased cell attachment. These results strongly indicate the potential use of gelatin-based systems for pDNA encoding microRNA delivery in gene therapy and further demonstrate the effectiveness of miR-200c for enhancing bone regeneration from synthetic bone grafts.

Hydrogel-Based Growth Factor Delivery Platforms: Strategies and Recent Advances

Growth factors play a crucial role in regulating a broad variety of biological processes and are regarded as powerful therapeutic agents in tissue engineering and regenerative medicine in the past decades. However, their application is limited by their short half-lives and potential side effects in physiological environments. Hydrogels are identified as having the promising potential to prolong the half-lives of growth factors and mitigate their adverse effects by restricting them within the matrix to reduce their rapid proteolysis, burst release, and unwanted diffusion. This review discusses recent progress in the development of growth factor-containing hydrogels for various biomedical applications, including wound healing, brain tissue repair, cartilage and bone regeneration, and spinal cord injury repair. In addition, the review introduces strategies for optimizing growth factor release including affinity-based delivery, carrier-assisted delivery, stimuli-responsive delivery, spatial structure-based delivery, and cellular system-based delivery. Finally, the review presents current limitations and future research directions for growth factor-delivering hydrogels.

Recent Development and Applications of Polydopamine in Tissue Repair and Regeneration Biomaterials

The various tissue damages are a severe problem to human health. The limited human tissue regenerate ability requires suitable biomaterials to help damage tissue repair and regeneration. Therefore, many researchers devoted themselves to exploring biomaterials suitable for tissue repair and regeneration. Polydopamine (PDA) as a natural and multifunctional material which is inspired by mussel has been widely applied in different biomaterials. The excellent properties of PDA, such as strong adhesion, photothermal and high drug-loaded capacity, seem to be born for tissue repair and regeneration. Furthermore, PDA combined with different materials can exert unexpected effects. Thus, to inspire researchers, this review summarizes the recent and representative development of PDA biomaterials in tissue repair and regeneration. This article focuses on why apply PDA in these biomaterials and what PDA can do in different tissue injuries.

Surface Engineering of Natural Killer Cells with CD44-targeting Ligands for Augmented Cancer Immunotherapy

Adoptive immunotherapy utilizing natural killer (NK) cells has demonstrated remarkable efficacy in treating hematologic malignancies. However, its clinical intervention for solid tumors is hindered by the limited expression of tumor-specific antigens. Herein, lipid-PEG conjugated hyaluronic acid (HA) materials (HA-PEG-Lipid) for the simple ex-vivo surface coating of NK cells is developed for 1) lipid-mediated cellular membrane anchoring via hydrophobic interaction and thereby 2) sufficient presentation of the CD44 ligand (i.e., HA) onto NK cells for cancer targeting, without the need for genetic manipulation. Membrane-engineered NK cells can selectively recognize CD44-overexpressing cancer cells through HA-CD44 affinity and subsequently induce in situ activation of NK cells for cancer elimination. Therefore, the surface-engineered NK cells using HA-PEG-Lipid (HANK cells) establish an immune synapse with CD44-overexpressing MIA PaCa-2 pancreatic cancer cells, triggering the "recognition-activation" mechanism, and ultimately eliminating cancer cells. Moreover, in mouse xenograft tumor models, administrated HANK cells demonstrate significant infiltration into solid tumors, resulting in tumor apoptosis/necrosis and effective suppression of tumor progression and metastasis, as compared to NK cells and gemcitabine. Taken together, the HA-PEG-Lipid biomaterials expedite the treatment of solid tumors by facilitating a sequential recognition-activation mechanism of surface-engineered HANK cells, suggesting a promising approach for NK cell-mediated immunotherapy.

Tumor Microenvironment-Responsive 6-Mercaptopurine-Releasing Injectable Hydrogel for Colon Cancer Treatment

Colon cancer is a significant health concern. The development of effective drug delivery systems is critical for improving treatment outcomes. In this study, we developed a drug delivery system for colon cancer treatment by embedding 6-mercaptopurine (6-MP), an anticancer drug, in a thiolated gelatin/polyethylene glycol diacrylate hydrogel (6MP-GPGel). The 6MP-GPGel continuously released 6-MP, the anticancer drug. The release rate of 6-MP was further accelerated in an acidic or glutathione environment that mimicked a tumor microenvironment. In addition, when pure 6-MP was used for treatment, cancer cells proliferated again from day 5, whereas a continuous supply of 6-MP from the 6MP-GPGel continuously suppressed the survival rate of cancer cells. In conclusion, our study demonstrates that embedding 6-MP in a hydrogel formulation can improve the efficacy of colon cancer treatment and may serve as a promising minimally invasive and localized drug delivery system for future development.

Coacervate-Filled Lipid Vesicles for Protein Delivery

Macromolecularly crowded coacervate is useful in protein delivery for tissue engineering and regenerative medicine. However, coacervate tends to aggregate easily, which impedes their application. Here, this work presents a method to prepare coacervate with enhanced stability. This work assembles phospholipids on the surface of a coacervate to form lipocoacervate (LipCo). The resultant LipCo possesses a discrete spherical structure with a coacervate interior and phospholipid outer shell. The size of LipCo does not change over the four-week observation window, whereas coacervate coalesced into one bulk phase within 30 min. This work uses vascular endothelial growth factor-C (VEGF-C) and fibroblast growth factor-2 (FGF-2) as examples to test LipCo's ability to maintain protein bioactivity. The in vitro lymphangiogenesis assay demonstrates that human dermal lymphatic endothelial cells (LECs) formed increased network of cord in VEGF-C and FGF-2 loaded LipCo group compared to free proteins and proteins loaded in coacervate. Overall, LipCo could serve as a protein delivery vehicle with improved colloidal stability.

Multiscale design of stiffening and ROS scavenging hydrogels for the augmentation of mandibular bone regeneration

Although biomimetic hydrogels play an essential role in guiding bone remodeling, reconstructing large bone defects is still a significant challenge since bioinspired gels often lack osteoconductive capacity, robust mechanical properties and suitable antioxidant ability for bone regeneration. To address these challenges, we first engineered molecular design of hydrogels (gelatin/polyethylene glycol diacrylate/2-(dimethylamino)ethyl methacrylate, GPEGD), where their mechanical properties were significantly enhanced via introducing trace amounts of additives (0.5 wt%). The novel hybrid hydrogels show high compressive strength (>700 kPa), stiff modulus (>170 kPa) and strong ROS-scavenging ability. Furthermore, to endow the GPEGD hydrogels excellent osteoinductions, novel biocompatible, antioxidant and BMP-2 loaded polydopamine/heparin nanoparticles (BPDAH) were developed for functionalization of the GPEGD gels (BPDAH-GPEGD). In vitro results indicate that the antioxidant BPDAH-GPEGD is able to deplete elevated ROS levels to protect cells viability against ROS damage. More importantly, the BPDAH-GPEGD hydrogels have good biocompatibility and promote the osteo differentiation of preosteoblasts and bone regenerations. At 4 and 8 weeks after implantation of the hydrogels in a mandibular bone defect, Micro-computed tomography and histology results show greater bone volume and enhancements in the quality and rate of bone regeneration in the BPDAH-GPEGD hydrogels. Thus, the multiscale design of stiffening and ROS scavenging hydrogels could serve as a promising material for bone regeneration applications.

•

Trace additives of DMAEMA markedly enhanced the mechanical performances of the gelatin-based hydrogels through molecular induced multiple crosslinking structures.

•

Molecular design strategy combined with bioactive nanocomposites have a synergistically effects on promoting ROS scavenging ability and osteoactivity of the biomimetic hydrogels.

Peptide-based coacervates in therapeutic applications

Coacervates are droplets formed by liquid‒liquid phase separation. An increasing number of studies have reported that coacervates play an important role in living cells, such as in the generation of membraneless organelles, and peptides contribute to condensate droplet formation. Peptides with versatile functional groups and special secondary structures, including α-helices, β-sheets and intrinsically disordered regions, provide novel insights into coacervation, such as biomimetic protocells, neurodegenerative diseases, modulations of signal transmission, and drug delivery systems. In this review, we introduce different types of peptide-based coacervates and the principles of their interactions. Additionally, we summarize the thermodynamic and kinetic mechanisms of peptide-based coacervates and the associated factors, including salt, pH, and temperature, affecting the phase separation process. We illustrate recent studies on modulating the functions of peptide-based coacervates applied in biological diseases. Finally, we propose their promising broad applications and describe the challenges of peptide-based coacervates in the future.

Coacervate-mediated novel pancreatic cancer drug Aleuria Aurantia lectin delivery for augmented anticancer therapy

Background

Pancreatic cancer, one of the cancers with the highest mortality rate, has very limited clinical treatment. Cancer cells express abnormal glycans on the surface, and some lectins with a high affinity for the glycans induce apoptosis in cancer. In this study, the efficacy of Aleuria Aurantia lectin (AAL) for the treatment of pancreatic cancer was evaluated and the efficacy improvement through AAL delivery with mPEGylated coacervate (mPEG-Coa) was investigated.

Methods

AAL was treated with pancreatic cancer cells, PANC-1, and the expression level of caspase-3 and subsequent apoptosis was analyzed. In particular, the anticancer efficacy of AAL was compared with that of concanavalin A, one of the representative anticancer lectins. Then, methoxypolyethylene glycol-poly(ethylene arginylaspartate diglyceride), a polycation, was synthesized, and an mPEG-Coa complex was prepared with polyanion heparin. The AAL was incorporated into the mPEG-Coa and the release kinetics of the AAL from the mPEG-Coa and the cargo protection capacity of the mPEG-Coa were evaluated. Finally, improved anticancer ability through Coa-mediated AAL delivery was assessed.

Results

These results indicated that AAL is a potential effective pancreatic cancer treatment. Moreover, mPEG-Coa rapidly released AAL at pH 6.5, an acidic condition in the cancer microenvironment. The initial rapid release of AAL effectively suppressed pancreatic cancer cells, and the continuous supply of AAL through the Coa transporter effectively inhibited proliferation recurrence of cancer cells.

Conclusion

AAL is a potential novel drug for the treatment of pancreatic cancer therapeutic agent. In addition, a continuous supply of drugs above the therapeutic threshold using mPEG-Coa could improve therapeutic efficacy.

Supplementary Information

The online version contains supplementary material available at 10.1186/s40824-022-00282-6.

Enhanced anticancer efficacy of primed natural killer cells via coacervate-mediated exogenous interleukin-15 delivery

Effective exogenous delivery of interleukin (IL)-15 to natural killer (NK) cells with subsequent anticancer efficacy could be a promising immune cell-based cancer immunotherapy. For the protection of encapsulated cargo IL-15 while maintaining its bioactivity under physiological conditions, we utilized a coacervate (Coa) consisting of a cationic methoxy polyethylene glycol-poly(ethylene arginyl aspartate diglyceride) (mPEG-PEAD) polymer, anionic counterpart heparin, and cargo IL-15. mPEGylation into the backbone cation effectively preserved the colloidal stability of Coa in harsh environments and enhanced the protection of cargo IL-15 than normal Coa without mPEGylation. Proliferation and anticancer efficacy of primed NK cells through co-culture with multiple cancer cell lines were enhanced in the mPEG-Coa group due to the maintained bioactivity of cargo IL-15 during the ex vivo expansion of NK cells. These facilitated functions of NK cells were also supported by the increased expression of mRNAs related to anticancer effects of NK cells, including cytotoxic granules, death ligands, anti-apoptotic proteins, and activation receptors. In summary, our Coa-mediated exogenous IL-15 delivery could be an effective ex vivo priming technique for NK cells with sustained immune activation that can effectively facilitate its usage for cancer immunotherapy.

The use of heparin/polycation coacervate sustain release system to compare the bone regenerative potentials of 5 BMPs using a critical sized calvarial bone defect model

Nonunion following bone fracture and segmental bone defects are challenging clinical conditions. To combat this clinical dilemma, development of new bone tissue engineering therapies using biocompatible materials to deliver bone growth factors is desirable. This aim of this study is to use a heparin/polycation coacervate sustained-release platform to compare 5 bone morphogenetic proteins (BMPs) for promoting bone defect healing in a critical sized calvarial defect model. The in vitro 3D osteogenic pellet cultures assays demonstrated that BMPs 2, 4, 6, 7 and 9 all enhanced mineralization in vitro compared to the control group. BMP2 resulted in higher mineralized volume than BMP4 and BMP6. All BMPs and the control group activated the pSMAD5 signaling pathway and expressed osterix (OSX). The binding of BMP2 with coacervate significantly increased the coacervate average particle size. BMP2, 4, 6, & 7 bound to coacervate significantly increased the Zeta potential of the coacervate while BMP9 binding showed insignificant increase. Furthermore, using a monolayer culture osteogenic assay, it was found that hMDSCs cultured in the coacervate BMP2 osteogenic medium expressed higher levels of RUNX2, OSX, ALP and COX-2 compared to the control and BMPs 4, 6, 7 & 9. Additionally, the coacervate complex can be loaded with up to 2 μg of BMP proteins for sustained release. In vivo, when BMPs were delivered using the coacervate sustained release system, BMP2 was identified to be the most potent BMP promoting bone regeneration and regenerated 10 times of new bone than BMPs 4, 6 & 9. BMP7 also stimulated robust bone regeneration when compared to BMPs 4, 6 & 9. The quality of the newly regenerated bone by all BMPs delivered by coacervate is equivalent to the host bone consisting of bone matrix and bone marrow with normal bone architecture. Although the defect was not completely healed at 6 weeks, coacervate sustain release BMPs, particularly BMP2 and BMP7, could represent a new strategy for treatment of bone defects and non-unions.

Inhibition of Colon Cancer Recurrence via Exogenous TRAIL Delivery Using Gel-like Coacervate Microdroplets

Colon cancer (CC) belongs to the three major malignancies with a high recurrence rate. Therefore, a novel drug delivery system that can prevent CC recurrence while minimizing side effects is needed. Tumor-necrosis-factor-related apoptosis-inducing ligand (TRAIL) has recently been spotlighted as a protein drug that can induce apoptosis of cancer cells specifically. However, its short in vivo half-life is still a challenge to overcome. Hence, in this study, a gel-like mPEGylated coacervate (mPEG-Coa) delivery platform was developed through electrostatic interaction of mPEG-poly(ethylene arginylaspartate diglyceride) (mPEG-PEAD) and heparin for effective protection of cargo TRAIL, subsequently preserving its bioactivity. mPEG-Coa could protect cargo TRAIL against protease. Sustained release was observed for a long-term (14 days). In addition, recurrence of HCT-116 cells was suppressed when cells were treated with TRAIL-loaded mPEG-Coa for 7 days through long-term continuous supply of active TRAIL, whereas re-proliferation occurred in the bolus TRAIL-treated group. Taken together, these results suggest that our gel-like mPEG-Coa could be utilized as a functional delivery platform to suppress CC recurrence by exogenously supplying TRAIL for a long time with a single administration.

Fabrication Parameter-Dependent Physico-Chemical Properties of Thiolated Gelatin/PEGDA Interpenetrating Network Hydrogels

BACKGROUND

The development of three-dimensional hydrogels using polymeric biomaterials is a key technology for tissue engineering and regenerative medicine. Successful tissue engineering requires the control and identification of the physicochemical properties of hydrogels.

METHODS

Interpenetrating network (IPN) hydrogel was developed using thiolated gelatin (GSH) and poly(ethylene glycol) diacrylate (PEGDA), with the aid of ammonium persulfate (APS) and N,N,N,N'-tetramethylethylenediamine (TEMED) as radical initiators. Each component was prepared in the following concentrations, respectively: 2.5 and 5% GSH (LG and HG), 12.5 and 25% PEGDA (LP and HP), 3% APS/1.5% TEMED (LI), and 4% APS/2% TEMED (HI). IPN hydrogel was fabricated by the mixing of GSH, PEGDA, and initiators in 5:4:1 volume ratios, and incubated at 37 °C for 30 min in the following 6 experimental formulations: (1) HG-LP-LI, (2) HG-LP-HI, (3) LG-HP-LI, (4) LG-HP-HI, (5) HG-HP-HI, and (6) HG-HP-LI. Herein, the physico-chemical characteristics of IPN hydrogels, including their morphological structures, hydrolytic degradation properties, mechanical properties, embedded protein release kinetics, and biocompatibility, were investigated.

RESULTS

The characteristics of the hydrogel were significantly manipulated by the concentration of the polymer, especially the conversion between HP and LP, rather than the concentration of the initiator, and no hydrogel formulation exhibited any toxicity to fibroblast and HaCaT cells.

CONCLUSION

We provide structural-physical relationships of the hydrogels by which means their physical properties could be conveniently controlled through component control, which could be versatilely utilized for various organizational engineering strategies.

Rat Calvarial Bone Regeneration by 3D-Printed β-Tricalcium Phosphate Incorporating MicroRNA-200c

Advanced fabrication methods for bone grafts designed to match defect sites that combine biodegradable, osteoconductive materials with potent, osteoinductive biologics would significantly impact the clinical treatment of large bone defects. In this study, we engineered synthetic bone grafts using a hybrid approach that combined three-dimensional (3D-)printed biodegradable, osteoconductive β-tricalcium phosphate (β-TCP) with osteoinductive microRNA(miR)-200c. 3D-printed β-TCP scaffolds were fabricated utilizing a suspension-enclosing projection-stereolithography (SEPS) process to produce constructs with reproducible microarchitectures that enhanced the osteoconductive properties of β-TCP. Collagen coating on 3D-printed β-TCP scaffolds slowed the release of plasmid DNA encoding miR-200c compared to noncoated constructs. 3D-printed β-TCP scaffolds coated with miR-200c-incorporated collagen increased the transfection efficiency of miR-200c of both rat and human BMSCs and additionally increased osteogenic differentiation of hBMSCs in vitro. Furthermore, miR-200c-incorporated scaffolds significantly enhanced bone regeneration in critical-sized rat calvarial defects. These results strongly indicate that bone grafts combining SEPS 3D-printed osteoconductive biomaterial-based scaffolds with osteoinductive miR-200c can be used as superior bone substitutes for the clinical treatment of large bone defects.

A novel BMP-2-loaded hydroxyapatite/beta-tricalcium phosphate microsphere/hydrogel composite for bone regeneration

Although bone morphogenetic protein (BMP) has potent osteoinductivity, the potential adverse events attributed to its burst release prevent its widespread clinical application. Therefore, there is a strong need for BMP delivery systems that maximize osteoinductivity while preventing adverse effects. We evaluated the bone-regenerating potential of NOVOSIS putty (NP), a novel composite combining hydroxyapatite, beta-tricalcium phosphate microsphere/poloxamer 407-based hydrogel, and recombinant human (rh) BMP-2. In vitro assessment of release kinetics by enzyme-linked immunosorbent assay demonstrated sustained release of rhBMP-2 from NP and burst release from collagen sponge (CS), and in vivo assessment of release kinetics by longitudinal tracking of fluorescently labeled rhBMP-2 showed a longer biological half-life of rhBMP-2 with NP than with CS. Furthermore, osteogenic gene expression in MC3T3-E1 cells was significantly higher after co-culture with NP than after co-culture with CS, suggesting that the sustained release of rhBMP-2 from NP effectively contributed to the differentiation of osteoblasts. In a rat spinal fusion model, the volume and quality of newly formed bone was higher in the NP group than in the CS group. Use of NP results in efficient bone regeneration through sustained release of rhBMP-2 and improves the quality of BMP-induced bone.

Stromal cell-derived factor-1 promotes osteoblastic differentiation of human bone marrow mesenchymal stem cells via the lncRNA-H19/miR-214-5p/BMP2 axis

BACKGROUND

Stromal cell-derived factor-1 (SDF-1) plays an important role in the osteoblastic differentiation of human bone marrow mesenchymal stem cells (hBMMSCs), but the specific mechanism remains unclear. Our study aimed to clarify the role of the lncRNA-H19/miR-214-5p/BMP2 axis in the osteoblastic differentiation of hBMMSCs induced by SDF-1.

METHODS

We used reverse-transcriptase polymerase chain reaction, western blotting, alkaline phosphatase activity test, and Alizarin red staining to evaluate the osteoblastic differentiation of primary hBMMSCs and the luciferase reporter assay to determine if lncRNA-H19 binds with miR-214-5p.

RESULTS

Our results indicated that SDF-1 (50 ng/mL) promotes the osteoblastic differentiation of hBMMSCs, significantly upregulates osteoblastogenic genes (OCN, OSX, RUNX2, and ALP), and increases Alizarin red staining, alkaline phosphatase activity, and lncRNA-H19 expression. Luciferase reporter assay verified that lncRNA-H19 binds with and represses miR-214-5p, thereby upregulating BMP2 expression. Use of miR-214-5p inhibitor or overexpression of lncRNA-H19 can promote the osteoblastic differentiation of hBMMSCs, but miR-214-5p or shH19 inhibits the osteoblastic differentiation of hBMMSCs. Treatment with an miR-214-5p inhibitor could rescue the inhibitory effect of shH19 on the osteoblastic differentiation of hBMMSCs.

CONCLUSIONS

Taken together, SDF-1 promotes the osteoblastic differentiation of hBMMSCs through the lncRNA-H19/miR-214-5p/BMP2 axis. Increased osteoblastic differentiation by an miR-214-5p inhibitor reveals a new possible strategy for the treatment of bone defect and osteoporosis.

Demineralized bone matrix scaffold modified with mRNA derived from osteogenically pre-differentiated MSCs improves bone repair

Gene therapy based on mRNA provides a promising approach for bone regeneration. Quick mRNA translation and controlled protein production could be earned by implantation of mRNA-activated scaffold in bone remodeling region. Furthermore, the expression levels of osteogenic-related mRNA in the cytoplasm of osteogenically pre-differentiated mesenchymal stem cells (MSCs) were high and the expression levels were different at different stages of osteogenically differentiated MSCs. This study intended to investigate the effect of osteoinductive-mRNAs (Oi-mRNAs), derived from osteogenically pre-differentiated MSCs at various stages (Day 1 (Oi1-mRNA), Day 3 (Oi3-mRNA), Day 7 (Oi7-mRNA), Day 14 (Oi14-mRNA) and Day 21 (Oi21-mRNA), respectively), on the osteogenic differentiation of MSCs. Further, the Oi-mRNAs combined with cationic polymer polyethylenimine (PEI) were loaded onto demineralized bone matrix (DBM) scaffold (Oi-mRNA/DBM). The results revealed that the Oi1-mRNA, Oi3-mRNA and Oi21-mRNA had no obvious effect on the osteogenic differentiation of MSCs, while the Oi7-mRNA increased the expression of alkaline phosphatase (ALP) and the Oi14-mRNA significantly promoted the expression of osteocalcin (OC) and osteopontin (OPN), and calcium deposition. In addition, the Oi14-mRNA/DBM scaffold could significantly enhance extracellular matrix (ECM) secretion and new collagen formation of MSCs. After being implanted into rat critical-sized cranium defect model, the Oi14-mRNA/DBM scaffold could promote the infiltration of cells and repair of bone defect in vivo. The DBM scaffold loaded with mRNA encoding osteoinductive protein may provide a powerful tool for bone defect repair.

Rational design of hydrogels to enhance osteogenic potential

Bone tissue engineering (BTE) encompasses the field of biomaterials, cells, and bioactive molecules to successfully guide the growth and repair of bone tissue. Current BTE strategies rely on delivering osteogenic molecules or cells via scaffolding materials. However, growth factor- and stem cell-based treatments have several limitations, such as source restriction, low stability, difficulties in predicting long-term efficacy, and high costs, among others. These issues have promoted the development of material-based therapy with properties of accessibility, high stability, tunable efficacy, and low-cost production. Hydrogels are widely used in BTE applications because of their unique hydrophilic nature and tunable physicochemical properties to mimic the native bone environment. However, current hydrogel materials are not ideal candidates due to minimal osteogenic capability on their own. Therefore, recent studies of BTE hydrogels attempt to counterbalance these issues by modifying their biophysical properties. In this article, we review recent progress in the design of hydrogels to instruct osteogenic potential, and present strategies developed to precisely control its bone healing properties.

Zanthoxylum nitidum extract attenuates BMP-2-induced inflammation and hyperpermeability

Bone morphogenetic protein-2 (BMP-2) is commonly applied in spinal surgery to augment spinal fusion. Nevertheless, its pro-inflammatory potential could induce dangerous side effects such as vascular hyper-permeability, posing the need for manners against this condition. The present study aims to investigate the protective effect of Zanthoxylum nitidum (ZN) on BMP-2-related hyperpermeability and inflammation on the human umbilical vein endothelial cells (HUVECs). The results revealed that, in a concentration-dependent manner, BMP-2 enhanced the production of pro-inflammatory cytokines, including interleukin (IL)-1α, IL-1β, and tumor necrosis factor-α, which were, however, suppressed by ZN. ZN inhibited BMP-2-induced inflammatory response by suppressing the phosphorylation of NF-κBp65 and IκB, and the abnormal nuclear translocation of p65. Moreover, the inhibited expression intercellular tight junction protein VE-cadherin and Occludin caused by BMP-2 was blocked by ZN. The hyper-permeability of HUVECs induced by BMP-2, as expressed as the higher fluorescent intensity of dextran, was also reversed by ZN. Overall, these findings demonstrated that ZN antagonized BMP-2-induced inflammation and hyperpermeability. It could be a therapeutic candidate for the treatment of BMP-2-induced side effects during spinal fusion.

Dual delivery of stem cells and insulin-like growth factor-1 in coacervate-embedded composite hydrogels for enhanced cartilage regeneration in osteochondral defects

Exogenous dual delivery of progenitor cell population and therapeutic growth factors (GFs) is one of alternative tissue engineering strategies for osteochondral tissue regeneration. In the present study, an implantable dual delivery platform was developed using coacervates (Coa) (i.e., a tertiary complex of poly(ethylene argininylaspartate diglyceride) (PEAD) polycation, heparin, and cargo insulin-like growth factor-1 (IGF-1), in thiolated gelatin (gelatin-SH)/ poly(ethylene glycol) diacrylate (PEGDA) interpenetrating network (IPN) hydrogels. Since Coa is able to protect cargo GF and maintain its long-term bioactivity, it is speculated that Coa-mediated delivery of chondrogenic factor IGF-1 with the aid of adipose-derived stem cells (ADSCs) would synergistically facilitate osteochondral tissue repair during physiological regeneration process. Our results indicate that gelatin-SH/PEGDA IPN hydrogels demonstrated biocompatibility and mechanical properties for a possible long-term transplantation, and PEAD-base Coa exhibited a sustained release of bioactive IGF-1 over 3 weeks. Subsequently, released IGF-1 from Coa could effectively induce chondrogenic differentiation of embedded ADSCs in the hydrogel, by showing enhanced glycosaminoglycan deposition and expression of chondrogenesis-associated genes. More importantly, at 12 weeks post-implantation in a rabbit full thickness osteochondral defect model, the quality of regenerative tissues in both chondral and subchondral layers was significantly improved in dual delivery of ADSC and IGF-1 in Coa encapsulated in gelatin-SH/PEGDA IPN hydrogels, as compared with a single delivery of ADSC only and a dual delivery without Coa. Therefore, we conclude that our Coa-embedded composite hydrogel platform could effectively augment osteochondral tissue regeneration holds promise for a feasible osteoarthritis therapeutic application.

Hydrogel as a Biomaterial for Bone Tissue Engineering: A Review

Severe bone damage from diseases, including extensive trauma, fractures, and bone tumors, cannot self-heal, while traditional surgical treatment may bring side effects such as infection, inflammation, and pain. As a new biomaterial with controllable mechanical properties and biocompatibility, hydrogel is widely used in bone tissue engineering (BTE) as a scaffold for growth factor transport and cell adhesion. In order to make hydrogel more suitable for the local treatment of bone diseases, hydrogel preparation methods should be combined with synthetic materials with excellent properties and advanced technologies in different fields to better control drug release in time and orientation. It is necessary to establish a complete method to evaluate the hydrogel's properties and biocompatibility with the human body. Moreover, establishment of standard animal models of bone defects helps in studying the therapeutic effect of hydrogels on bone repair, as well as to evaluate the safety and suitability of hydrogels. Thus, this review aims to systematically summarize current studies of hydrogels in BTE, including the mechanisms for promoting bone synthesis, design, and preparation; characterization and evaluation methods; as well as to explore future applications of hydrogels in BTE.

Recent Strategies in Fabrication of Gradient Hydrogels for Tissue Engineering Applications

Hydrogels are widely used as scaffold in tissue engineering field because of their ability to mimic the cellular microenvironment. However, mimicking a completely natural cellular environment is complicated due to the differences in various physical and chemical properties of cellular environments. Recently, gradient hydrogels provide excellent heterogeneous environment to mimic the different cellular microenvironments. To create hydrogels with an anisotropic distribution, gradient hydrogels have been widely developed by adopting several gradient generation techniques. Herein, the various gradient hydrogel fabrication techniques, including dual syringe pump systems, microfluidic device, photolithography, diffusion, and bio-printing are summarized. As the effects of gradient 3D hydrogels with stems have been reviewed elsewhere, this review focuses principally on gradient hydrogel fabrication for multi-model tissue regeneration. This review provides new insights into the key points for fabrication of gradient hydrogels for multi-model tissue regeneration.

Development of Polymer Coacersome Structure with Enhanced Colloidal Stability for Therapeutic Protein Delivery

Poly(ethylene arginyl aspartate diglyceride) (PEAD) polycation is widely used to prepare coacervate particles by electrostatic complexation with an anionic heparin (HEP) in aqueous environments, for controlled release of therapeutic proteins. However, coacervate complexes aggregate randomly due to particle-particle charge interactions. Herein, a new term "coacersome" is introduced to represent a stable polyplex formed by complexation of mPEGylated PEAD and HEP. Methoxy polyethylene glycol (mPEG)-b-cationic PEAD diblock copolymers are synthesized and complexed with HEP to create a stable "coacersome" structure. Water-soluble mPEG moiety assembles on the surface of coacersomes in aqueous conditions and creates a steric barrier to avoid aggregation of coacersomes. The coacersomes are able to maintain their initial spherical morphology and size for longer durations in the presence of competing ions, such as 0.3 m NaCl. Additionally, the coacersomes exhibit biocompatibility toward human dermal fibroblasts, a high loading efficiency (>96%) for encapsulation of bone morphogenetic protein 2 (BMP-2), and a sustained release profile up to 28 days. The BMP-2-loaded coacersomes further exhibit increased osteogenic differentiation of human mesenchymal stem cells (hMSCs). The developed coacersome structures have the potential to be utilized as effective carriers for therapeutic protein delivery.