Catalytic Asymmetric Oxygenations with the Environmentally Benign Oxidants H2O2 and O2

Boosting H2O2 production via two-electron oxygen reduction with O-doped g-C3N4 decorated with Ti3C2Tx quantum dots

Photocatalytic synthesis of H2O2 with g-C3N4 holds great promise for converting solar energy into chemical energy, but it remains constrained by the narrow optical absorption range and rapid charge recombination. To overcome these challenges, Ti3C2Tx MXene quantum dots (TQDs), known for their ease of carrier regulation and strong visible light absorption, were incorporated into O-doped g-C3N4 (O-CN) to form TQDs-modified O-CN (O-CN@TQDs) with a Schottky heterojunction. Attributed to such structural design, the H2O2 production was promoted through the two-step two-electron oxygen reduction pathway, with O2- serving as the primary intermediate. The photocatalytic H2O2 production rate over optimized O-CN@TQDs reached 868.9 μmol g-1 h-1 under visible light irradiation, which was 10.8 times higher than that of the pristine g-C3N4. This study underscores the potential of judiciously selecting suitable semiconductor and metal-like materials to construct Schottky heterojunctions for the efficient photocatalytic production of H2O2.

Leveraging Carbon Quantum Dot Spacers as Dual Proton/Electron Boosters to Upgrade TiO2@Polydopamine Photocatalysts for pH-Resilient Conversion of O2 into H2O2

Photocatalytic synthesis of H2O2 is a proton-coupled electron transfer (PCET) process, which is generally jeopardized by the kinetic mismatch between photogenerated electron transfer and proton supply. To address the challenge, here we proposed a new core-shell design of nanocomposite catalysts comprising of carbon quantum dot (CD)-topped TiO2 nanoparticles encapsulated by polydopamine (PDA) shells, which delivered stable catalytic activity across a pH range of 1-9, exhibiting a photocatalytic generation rate of H2O2 that reached 18.14 mmol g-1 h-1 in methanol and 8.66 mmol g-1 h-1 in water. This extraordinary, pH-tolerant photocatalytic generation of H2O2 was benefited from the innovative use of CDs, interspaced between the TiO2 cores and PDA shells, not only as a reservoir of protons to buffer the local acidic microenvironment but also as a proton/electron dual booster to sustain an excellent kinetic match between the proton and photogenerated electron transfer, thus enabling the O2 reduction to selectively proceed via two-electron reaction pathway over a wide pH span.

Flavin-Catalyzed Chemoselective Aerobic Oxygenation of Heteroarylmethanes to Ketones

A novel flavin-catalyzed chemoselective aerobic oxygenation of arylheteroarylmethanes to ketones has been developed under metal-free and mild conditions. This catalytic system employs a cationic flavin to activate sp3 C-H bonds through the formation of pyridinium-flavin adducts, enabling precise proton and electron transfer for oxygen atom insertion. As a result, this method exhibits high chemoselectivity, effectively distinguishing between arylheteroarylmethanes and diarylmethanes.

Bioinspired Nanochitin-Based Porous Constructs for Light-Driven Whole-Cell Biotransformations

Solid-state photosynthetic cell factories (SSPCFs) are a new production concept that leverages the innate photosynthetic abilities of microbes to drive the production of valuable chemicals. It addresses practical challenges such as high energy and water demand and improper light distribution associated with suspension-based culturing; however, these systems often face significant challenges related to mass transfer. The approach focuses on overcoming these limitations by carefully engineering the microstructure of the immobilization matrix through freeze-induced assembly of nanochitin building blocks. The use of nanochitins with optimized size distribution enabled the formation of macropores with lamellar spatial organization, which significantly improves light transmittance and distribution, crucial for maximizing the efficiency of photosynthetic reactions. The biomimetic crosslinking strategy, leveraging specific interactions between polyphosphate anions and primary amine groups featured on chitin fibers, produced mechanically robust and wet-resilient cryogels that maintained their functionality under operational conditions. Various model biotransformation reactions leading to value-added chemicals are performed in chitin-based matrix. It demonstrates superior or comparable performance to existing state-of-the-art matrices and suspension-based systems. The findings suggest that chitin-based cryogel approach holds significant promise for advancing the development of solid-state photosynthetic cell factories, offering a scalable solution to improve the efficiency and productivity of light-driven biotransformation.

Single-Atom-Induced Hybridization States Promote the Direct Trapping of Hot Carriers by Reactants for Photocatalysis

Single-atom manipulation has emerged as an effective strategy for enhancing the photocatalytic efficiency. However, the mechanism of photogenerated carrier dynamics under single-atom modulation remains unclear. Combining first-principles calculations and non-adiabatic molecular dynamics simulations, we systematically studied carrier transfer and recombination in the oxygen reduction reaction of single-atom-doped C3N4 systems. Unlike the conventional two-step process, where single atoms trap photogenerated carriers before transferring them to reactants, our findings reveal a direct one-step electron transfer process, where single-atom-induced hybridization states facilitate the direct trapping of hot carriers by reactants from photocatalysts. Specifically, photogenerated electron transfer time through the one-step process is 237 and 325 fs for Sb and Cu single-atom-doped systems, respectively, considerably faster than the two-step process (hundreds of picoseconds). Moreover, these systems exhibit a nanosecond-level photogenerated carrier lifetime, driving a high photocatalytic efficiency. This study elucidates the carrier dynamics in single-atom photocatalysts, facilitating the screening of high-performance photocatalysts.

Enhancing photocatalytic hydrogen peroxide generation by tuning hydrazone linkage density in covalent organic frameworks

The conversion of solar energy into chemical energy or high-value chemicals has attracted considerable research interest in the context of the global energy crisis. Hydrogen peroxide (H2O2) is a versatile and powerful oxidizing agent widely used in chemical synthesis and medical disinfection. H2O2 also serves as a clean energy source in fuel cells, generating electricity with zero-carbon emissions. Recently, the sustainable production of H2O2 from water and oxygen using covalent organic frameworks (COFs) as photocatalysts has attracted considerable attention; however, systematic studies highlighting the role of linkages in determining photocatalytic performance are scarce. Under these circumstances, herein, we demonstrate that varying the imine and hydrazone linkages within the framework significantly influences photocatalytic H2O2 production. COFs with high-density hydrazone linkages, providing optimal docking sites for water and oxygen, enhance H2O2 generation activity (1588 μmol g-1 h-1 from pure water in the air), leading to highly efficient solar-to-chemical energy conversion.

Recent Progress in Situ Application of H2O2 Produced via Catalytic Synthesis

Industrial production of H2O2 requires lots of energy and causes environmental pollution. Moreover, in subsequent applications, much economic loss could be produced during the transportation process of H2O2 and its dilution process. Therefore, it is highly desirable for in situ application of H2O2. In recent years, catalytic synthesis of H2O2, e. g., direct catalytic synthesis, electrocatalytic synthesis, and photocatalytic synthesis, has attracted more and more attention because the continuous and low-concentration H2O2 produced by catalytic synthesis can be directly used for the oxidation of organic compounds, effectively avoiding the shortcomings of the current industrial route. Here, we briefly reviewed the latest processes for the catalytic production of H2O2 via various routes. On this basis, we summarized and discussed the in situ application of H2O2 in typical organic conversion reactions, including the ammoximation of ketones, the oxidation of alcohols, the oxidation of C-H bonds, and the oxidation of olefins. Some in situ coupling reactions have shown excellent performance with high conversion and selectivity, and the economic cost has been significantly reduced. Finally, the shortcomings of the in situ utilization of H2O2 in coupling reactions were analyzed, and some strategies for promoting the efficiency of the H2O2 application in organic synthesis were proposed.

Robust Covalent Organic Frameworks for Photosynthesis of H2O2: Advancements, Challenges and Strategies

Since 2020, covalent organic frameworks (COFs) are emerging as robust catalysts for the photosynthesis of hydrogen peroxide (H2O2), benefiting from their distinct advantages. However, the current efficiency of H2O2 production and solar-to-chemical energy conversion efficiency (SCC) remain suboptimal due to various constraints in the reaction mechanism. Therefore, there is an imperative to propose efficiency improvement strategies to accelerate the development of this reaction system. This comprehensive review delineates recent advances, challenges, and strategies in utilizing COFs for photocatalytic H2O2 production. It explores the fundamentals and challenges (e.g., oxygen (O2) mass transfer rate, O2 adsorption capacity, response to sunlight, electron-hole separation efficiency, charge transfer efficiency, selectivity, and H2O2 desorption) associated with this process, as well as the advantages, applications, classification, and preparation strategies of COFs for this purpose. Various strategies to enhance the performance of COFs in H2O2 production are highlighted. The review aims to stimulate further advancements in utilizing COFs for photocatalytic H2O2 production and discusses potential prospects, challenges, and application areas in this field.

Photocatalyst-Free Transformation of C(sp3)-H Bonds to Oxime Ethers via Photoinduced Hydrogen Atom Transfer

Herein, a direct transformation of aliphatic C-H bonds to oxime ethers has been developed via light-promoted hydrogen atom transfer (HAT) in the absence of a photocatalyst. Singlet oxygen and chlorine radical are complementary C(sp3)-H bond cleaving agents in this reaction, enabling the extraction of hydrogen atoms from a diverse range of compounds, like cycloalkanes, ethers, amines, amides, and cyclic sulfides. This method excels in transforming common aliphatic C-H bonds into valuable oxime ethers featuring abundant chemical feedstocks, good functional group tolerance, and catalyst free conditions.

Proton-Enriched Alginate-Graphene Hydrogel Microreactor for Enhanced Hydrogen Peroxide Photosynthesis

Efficient synthesis of H2O2 via photocatalytic oxygen reduction without sacrificial agents is challenging due to inadequate proton supply from water and difficulty in maintaining O-O bond during O2 activation. Herein, we developed a straightforward strategy involving a proton-rich hydrogel cross-linked by metal ions [M(n)], which is designed to facilitate the selective production of H2O2 through proton relay and metal ion-assisted detachment of crucial intermediates. The hydrogel comprises CdS/graphene and alginate cross-linked by metal ions via O=C-O-M(n) bonds. Efficient O2 reduction and hydrogenation occurred, benefitting from the collaboration between proton-rich alginate and the photocatalytically active CdS/graphene. Meanwhile, the O=C-O-M(n) bonds enhance the electron density of α-carbon sites on graphene, crucial for O2 activation and *OOH intermediate detachment, preventing deeper O-O bond cleavage. The role of metal ions in promoting *OOH desorption was demonstrated through Lewis acidity-dependent activity, with Y(III) having the highest activity, followed by Lu(III), La(III), and Ca(II).

Synergy of Ag and Interfacial Oxygen Vacancies on TiO2 for Highly Efficient Photocatalytic Production of H2O2

Photocatalytic H2O2 production stands as a promising sustainable technology for chemical synthesis. However, rapid charge recombination and limited oxygen adsorption by photocatalysts often limit its efficiency. Herein, we demonstrate that the synergy of Ag and interfacial oxygen vacancies on TiO2 could overcome these challenges. The optimized Ag/TiO2-50 photocatalyst achieved an impressive H2O2 production rate of 12.9 mmol h-1 g-1 and maintained a steady-state concentration of 12.8 mM, significantly outperforming most TiO2-based photocatalysts documented in the literature. Detailed mechanistic studies, aided by TAS, in situ X-ray photoelectron spectroscopy (XPS), and in situ electron paramagnetic resonance (EPR) techniques, indicate that the oxygen vacancies at the Ag-TiO2 interface act as an interfacial hole trap, inducing a directional hole transfer. This, coupled with Ag acting as an electron acceptor, synergistically boosts the electron-hole separation. Additionally, the increased amount of oxygen vacancies at the Ag-TiO2 interface of Ag/TiO2-50 leads to enhanced O2 adsorption, thus contributing to its superior catalytic performance. This study provides valuable insights into interfacial traps in the charge transfer process and highlights the potential of interface regulation for achieving efficient photocatalytic conversion.

Aerobic oxidative C-C bond formation through C-H bond activation catalysed by flavin and iodine

We report a metal/light-free aerobic oxidative C-C bond formation using sp3 C-H bond activation of tetrahydroisoquinolines catalyzed by flavin and iodine. The dual catalytic system enabled the oxidative Mannich and aza-Henry reactions by the cross-dehydrogenative coupling between two sp3 C-H bonds. Furthermore, the flavin-iodine-coupled catalysis was applied to the synthesis of pyrrolo[2,1-a]isoquinolines through the sequential oxidative 1,3-dipolar cycloaddition and dehydrogenative aromatization. The biomimetic flavin catalysis efficiently activates molecular oxygen; thus the non-metal dual catalytic system enables green oxidative transformation using molecular oxygen as an environmentally friendly terminal oxidant which generates benign water.

Intramolecular C-H Oxidation in Iron(V)-oxo-carboxylato Species Relevant in the γ-Lactonization of Alkyl Carboxylic Acids

High-valent oxoiron species have been invoked as oxidizing agents in a variety of iron-dependent oxygenases. Taking inspiration from nature, selected nonheme iron complexes have been developed as catalysts to elicit C-H oxidation through the mediation of putative oxoiron(V) species, akin to those proposed for Rieske oxygenases. The addition of carboxylic acids in these iron-catalyzed C-H oxidations has proved highly beneficial in terms of product yields and selectivities, suggesting the direct involvement of iron(V)-oxo-carboxylato species. When the carboxylic acid functionality is present in the alkane substrate, it acts as a directing group, enabling the selective intramolecular γ-C-H hydroxylation that eventually affords γ-lactones. While this mechanistic frame is solidly supported by previous mechanistic studies, direct spectroscopic detection of the key iron(V)-oxo-carboxylato intermediate and its competence for engaging in the selective γ-C-H oxidation leading to lactonization have not been accomplished. In this work, we generate a series of well-defined iron(V)-oxo-carboxylato species (2c-2f) differing in the nature of the bound carboxylate ligand. Species 2c-2f are characterized by a set of spectroscopic techniques, including UV-vis spectroscopy, cold-spray ionization mass spectrometry (CSI-MS), and, in selected cases, EPR and Mössbauer spectroscopies. We demonstrate that 2c-2f undergo site-selective γ-lactonization of the carboxylate ligand in a stereoretentive manner, thus unequivocally identifying metal-oxo-carboxylato species as the powerful yet selective C-H cleaving species in catalytic γ-lactonization reactions of carboxylic acids. Reactivity experiments confirm that the intramolecular formation of γ-lactones is in competition with the intermolecular oxidation of external alkanes and olefins. Finally, mechanistic studies, together with DFT calculations, support a mechanism involving a site-selective C-H cleavage in the γ-position of the carboxylate ligand by the oxo moiety, followed by a fast carboxylate rebound, eventually leading to the selective formation of γ-lactones.

Expanding the Clip-and-Cleave Concept: Approaching Enantioselective C-H Hydroxylations by Copper Imine Complexes Using O2 and H2O2 as Oxidants

Copper-mediated aromatic and aliphatic C-H hydroxylations using benign oxidants (O2 and H2O2) have been studied intensively in recent years to meet the growing demand for efficient and green C-H functionalizations. Herein, we report an enantioselective variant of the so-called clip-and-cleave concept for intramolecular ligand hydroxylations by the application of chiral diamines as directing groups. We tested the hydroxylation of cyclohexanone and 1-acetyladamantane under different oxidative conditions (CuI/O2; CuI/H2O2; CuII/H2O2) in various solvents. As an outstanding example, we obtained (R)-1-acetyl-2-adamantol with a yield of 37% and >99:1 enantiomeric excess from hydroxylation in acetone using CuI and O2. Low-temperature stopped-flow UV-vis measurements in combination with density functional theory (DFT) computations revealed that the hydroxylation proceeds via a bis(μ-oxido) dicopper intermediate. The reaction product represents a rare example of an enantiopure 1,2-difunctionalized adamantane derivative, which paves the way for potential pharmacological studies. Furthermore, we found that 1-acetyladamantane can be hydroxylated in a one-pot reaction under air with isolated yields up to 36% and enantiomeric ratios of 96:4 using CuII/H2O2 in MeOH.

Genome Mining Leads to the Identification of a Stable and Promiscuous Baeyer-Villiger Monooxygenase from a Thermophilic Microorganism

Baeyer-Villiger monooxygenases (BVMOs) are NAD(P)H-dependent flavoproteins that convert ketones to esters and lactones. While these enzymes offer an appealing alternative to traditional Baeyer-Villiger oxidations, these proteins tend to be either too unstable or exhibit too narrow of a substrate scope for implementation as industrial biocatalysts. Here, sequence similarity networks were used to search for novel BVMOs that are both stable and promiscuous. Our genome mining led to the identification of an enzyme from Chloroflexota bacterium (strain G233) dubbed ssnBVMO that exhibits i) the highest melting temperature of any naturally sourced BVMO (62.5 °C), ii) a remarkable kinetic stability across a wide range of conditions, similar to those of PAMO and PockeMO, iii) optimal catalysis at 50 °C, and iv) a broad substrate scope that includes linear aliphatic, aromatic, and sterically bulky ketones. Subsequent quantitative assays using propiophenone demonstrated >95 % conversion. Several fusions were also constructed that linked ssnBVMO to a thermostable phosphite dehydrogenase. These fusions can recycle NADPH and catalyze oxidations with sub-stoichiometric quantities of this expensive cofactor. Characterization of these fusions permitted identification of PTDH-L1-ssnBVMO as the most promising protein that could have utility as a seed sequence for enzyme engineering campaigns aiming to develop biocatalysts for Baeyer-Villiger oxidations.

Stereodivergent Total Synthesis of Tacaman Alkaloids

This paper describes a concise, asymmetric and stereodivergent total synthesis of tacaman alkaloids. A key step in this synthesis is the biocatalytic Baeyer-Villiger oxidation of cyclohexanone, which was developed to produce seven-membered lactones and establish the required stereochemistry at the C14 position (92 % yield, 99 % ee, 500 mg scale). Cis- and trans-tetracyclic indoloquinolizidine scaffolds were rapidly synthesized through an acid-triggered, tunable acyl-Pictet-Spengler type cyclization cascade, serving as the pivotal reaction for building the alkaloid skeleton. Computational results revealed that hydrogen bonding was crucial in stabilizing intermediates and inducing different addition reactions during the acyl-Pictet-Spengler cyclization cascade. By strategically using these two reactions and the late-stage diversification of the functionalized indoloquinolizidine core, the asymmetric total syntheses of eight tacaman alkaloids were achieved. This study may potentially advance research related to the medicinal chemistry of tacaman alkaloids.

Catalytic Enantioselective Hydroxylation of Tertiary Propargylic C(sp3)-H Bonds in Acyclic Systems: a Kinetic Resolution Study

Direct site-selective and enantioselective oxyfunctionalization of C(sp3)-H bonds to form alcohols with a general scope, with predictable selectivities, and in preparatively useful yields represents a paradigm shift in the standard logic of synthetic organic chemistry. However, the knowledge of either enzymatic or nonenzymatic asymmetric hydroxylation of tertiary C-H bonds for enantioenriched tertiary alcohol synthesis is sorely lacking. Here, we report a practical manganese-catalyzed enantio-differentiating hydroxylation of tertiary propargylic C-H bonds in acyclic systems, producing a wide range of structurally diverse enantioenriched tertiary propargyl alcohols in high efficiency with extremely efficient chemo- and enantio-discrimination. Other features include the use of C-H substrates as the limiting reagent, noteworthy functional group compatibility, great synthetic utilities, and scalability. The findings serve as a blueprint for the development of metal-catalyzed asymmetric oxidation of challenging substrates.

Water and Air Stable Copper(I) Complexes of Tetracationic Catenane Ligands for Oxidative C-C Cross-Coupling

Aqueous soluble and stable Cu(I) molecular catalysts featuring a catenane ligand composed of two dicationic, mutually repelling but mechanically interlocked macrocycles are reported. The ligand interlocking not only fine-tunes the coordination sphere and kinetically stabilizes the Cu(I) against air oxidation and disproportionation, but also buries the hydrophobic portions of the ligands and prevents their dissociation which are necessary for their good water solubility and a sustained activity. These catenane Cu(I) complexes can catalyze the oxidative C-C coupling of indoles and tetrahydroisoquinolines in water, using H2O2 as a green oxidant with a good substrate scope. The successful use of catenane ligands in exploiting aqueous Cu(I) catalysis thus highlights the many unexplored potential of mechanical bond as a design element for exploring transition metal catalysis under challenging conditions.

Mechanisms of Mn(V)-Oxo to Mn(IV)-Oxyl Conversion: From Closed-Cubane Photosystem II to Mn(V) Catalysts and the Role of the Entering Ligands

The low activation barrier for O-O coupling in the closed-cubane Oxygen-Evolving Centre (OEC) of Photosystem II (PSII) requires water coordination with the Mn4 'dangler' ion in the Mn(V)-oxo fragment. This coordination transforms the Mn(V)-oxo complex into a more reactive Mn4(IV)-oxyl species, enhancing O-O coupling. This study explains the mechanism behind the coordination and indicates that in the most stable form of the OEC, the Mn4 fragment adopts a trigonal bipyramidal geometry but needs to transition to a square pyramidal form to be activated for O-O coupling. This transition stabilizes the Mn4 dxy orbital, enabling electron transfer from the oxo ligand to the dxy orbital, converting the oxo ligand into an oxyl species. The role of the water is to coordinate with the square pyramidal structure, reducing the energy gap between the oxo and oxyl forms, thereby lowering the activation energy for O-O coupling. This mechanism applies not only to the OEC system but also to other Mn(V)-based catalysts. For other catalysts, ligands such as OH- stabilize the Mn(IV)-oxyl species better than water, improving catalyst activation for reactions like C-H bond activation. This study is the first to explain the Mn(V)-oxo to Mn(IV)-oxyl conversion, providing a new foundation for Mn-based catalyst design.

Co(II)-N4 Catalysts for the Coupling of CO2 with Epoxides into Cyclic Carbonates: Catalytic Activity, Computational and Kinetic Studies

In this study, we synthesized and characterized a series of cobalt(II) complexes bearing linear tetradentate N4 ligands. These Co(II)-N4 complexes proved to be efficient catalysts for the cycloaddition reaction between carbon dioxide and epoxides even at room temperature and 1 bar pressure of carbon dioxide without the need for solvents or cocatalysts. Furthermore, when combined with (triphenylphosphoranylidene)ammonium chloride (PPNCl) as a cocatalyst, the Co-N4 catalysts exhibited an impressive turnover frequency of up to 41,000 h-1 for coupling of epichlorohydrin/CO2. These Co(II)-N4 catalysts were found to have excellent stability and reusability, retaining their catalytic activity after they were recycled seven times. Density functional theory (DFT) calculations provided a comprehensive mechanism for the cycloaddition reaction, indicating that the rate-determining step is the epoxide ring opening, in both the presence and absence of PPNCl. Further kinetic studies allow us to determine the activation parameters (ΔH‡, ΔS‡, and ΔG‡ at 25 °C) of the coupling reaction using the Eyring equation. The Gibbs free activation energy obtained from the kinetic studies was in close agreement with that of the DFT calculations. The substituent effect on the cycloaddition reaction of CO2 with various substituted styrene oxides was also examined for the first time.

Manganese-Catalyzed 5-Endo-trig Oxygenative Cyclization of α,β-Unsaturated Oximes under Air and Ambient Conditions for the Synthesis of 4,5-Dihydroisoxazoles

The stereoselective 5-endo-trig oxygenative cyclization of α,β-unsaturated oximes was achieved using molecular oxygen (O2) and a manganese catalyst. Several 4-hydroxy-4,5-dihydroisoxazoles were obtained in high yields by directly incorporating O2 from the atmosphere (eliminating the necessity for a pure oxygen environment) and using an unprecedentedly low loading of Mn(acac)3 (as little as 0.020 mol %) without additional additives. Because of its desirable features, such as operational simplicity, inexpensive catalyst, mild reaction conditions (open flask conditions at room temperature), and broad substrate compatibility, this novel reaction provides an attractive synthetic approach to producing 4-hydroxy-4,5-dihydroisoxazoles.

Enhanced Reactivities of Iron(IV)-Oxo Porphyrin Species in Oxidation Reactions Promoted by Intramolecular Hydrogen-Bonding

High-valent iron-oxo species are one of the common intermediates in both biological and biomimetic catalytic oxidation reactions. Recently, hydrogen-bonding (H-bonding) has been proved to be critical in determining the selectivity and reactivity. However, few examples have been established for mechanistic insights into the H-bonding effect. Moreover, intramolecular H-bonding effect on both C-H activation and oxygen atom transfer (OAT) reactions in synthetic porphyrin model system has not been investigated yet. In this study, a series of heme-containing iron(IV)-oxo porphyrin species with or without intramolecular H-bonding are synthesized and characterized. Kinetic studies revealed that intramolecular H-bonding can significantly enhance the reactivity of iron(IV)-oxo species in OAT, C-H activation, and electron-transfer reactions. This unprecedented unified H-bonding effect is elucidated by theoretical calculations, which showed that intramolecular H-bonding interactions lower the energy of the anti-bonding orbital of iron(IV)-oxo porphyrin species, resulting in the enhanced reactivities in oxidation reactions irrespective of the reaction type. To the best of the knowledge, this is the first extensive investigation on the intramolecular H-bonding effect in heme system. The results show that H-bonding interactions have a unified effect with iron(IV)-oxo porphyrin species in all three investigated reactions.

Electrochemical hydrogenation and oxidation of organic species involving water

Fossil fuel-driven thermochemical hydrogenation and oxidation using high-pressure H2 and O2 are still popular but energy-intensive CO2-emitting processes. At present, developing renewable energy-powered electrochemical technologies, especially those using clean, safe and easy-to-handle reducing agents and oxidants for organic hydrogenation and oxidation reactions, is urgently needed. Water is an ideal carrier of hydrogen and oxygen. Electrochemistry provides a powerful route to drive water splitting under ambient conditions. Thus, electrochemical hydrogenation and oxidation transformations involving water as the hydrogen source and oxidant, respectively, have been developed to be mild and efficient tools to synthesize organic hydrogenated and oxidized products. In this Review, we highlight the advances in water-participating electrochemical hydrogenation and oxidation reactions of representative organic molecules. Typical electrode materials, performance metrics and key characterization techniques are firstly introduced. General electrocatalyst design principles and controlling the microenvironment for promoting hydrogenation and oxygenation reactions involving water are summarized. Furthermore, paired hydrogenation and oxidation reactions are briefly introduced before finally discussing the challenges and future opportunities of this research field.

The Nexus of Innovation: Electrochemically Synthesizing H2O2 and Its Integration with Downstream Reactions

Hydrogen peroxide (H2O2) represents a chemically significant oxidant that is prized for its diverse applicability across various industrial domains. Recent innovations have shed light on the electrosynthesis of H2O2 through two-electron oxygen reduction reactions (2e- ORR) or two-electron water oxidation reactions (2e- WOR), processes that underscore the attractive possibility for the on-site production of this indispensable oxidizing agent. However, the translation of these methods into practical utilization within chemical manufacturing industries remains an aspiration rather than a realized goal. This Perspective intends to furnish a comprehensive overview of the latest advancements in the domain of coupled chemical reactions with H2O2, critically examining emergent strategies that may pave the way for the development of new reaction pathways. These pathways could enable applications that hinge on the availability and reactivity of H2O2, including, but not limited to the chemical synthesis coupled with H2O2 and waste water treatment byFenton-like reactions. Concurrently, the Perspective acknowledges and elucidates some of the salient challenges and opportunities inherent in the coupling of electrochemically generated H2O2, thereby providing a scholarly analysis that might guide future research.

Water co-catalysis in aerobic olefin epoxidation mediated by ruthenium oxo complexes

We report the development of a versatile Ru-porphyrin catalyst system which performs the aerobic epoxidation of aromatic and aliphatic (internal) alkenes under mild conditions, with product yields of up to 95% and turnover numbers (TON) up to 300. Water is shown to play a crucial role in the reaction, significantly increasing catalyst efficiency and substrate scope. Detailed mechanistic investigations employing both computational studies and a range of experimental techniques revealed that water activates the RuVI di-oxo complex for alkene epoxidation via hydrogen bonding, stabilises the RuIV mono-oxo intermediate, and is involved in the regeneration of the RuVI di-oxo complex leading to oxygen atom exchange. Distinct kinetics are obtained in the presence of water, and side reactions involved in catalyst deactivation have been identified.

Sn Bulk Phase Doping and Surface Modification on Ti4 O7 for Oxygen Reduction to Hydrogen Peroxide

Developing stable and highly selective two-electron oxygen reduction reaction (2e- ORR) electrocatalysts for producing hydrogen peroxide (H2 O2 ) is considered a major challenge to replace the anthraquinone process and achieve a sustainable green economy. Here, we doped Sn into Ti4 O7 (D-Sn-Ti4 O7 ) by simple polymerization post-calcination method as a high-efficiency 2e- ORR electrocatalyst. In addition, we also applied plain calcination after the grinding method to load Sn on Ti4 O7 (L-Sn-Ti4 O7 ) as a comparison. However, the performance of L-Sn-Ti4 O7 is far inferior to that of the D-Sn-Ti4 O7 . D-Sn-Ti4 O7 exhibits a starting potential of 0.769 V (versus the reversible hydrogen electrode, RHE) and a high H2 O2 selectivity of 95.7 %. Excitingly, the catalyst can maintain a stable current density of 2.43 mA ⋅ cm-2 for 3600 s in our self-made H-type cell, and the cumulative H2 O2 production reaches 359.2 mg ⋅ L-1 within 50,000 s at 0.3 V. The performance of D-Sn-Ti4 O7 is better than that of the non-noble metal 2e- ORR catalysts reported so far. The doping of Sn not only improves the conductivity but also leads to the lattice distortion of Ti4 O7 , further forming more oxygen vacancies and Ti3+ , which greatly improves its 2e- ORR performance compared with the original Ti4 O7 . In contrast, since the Sn on the surface of L-Sn-Ti4 O7 displays a synergistic effect with Tin+ (3≤n≤4) of Ti4 O7 , the active center Tin+ dissociates the O=O bond, making it more inclined to 4e- ORR.

Heterogeneous H2O2-based selective oxidations over zirconium tungstate α-ZrW2O8

Catalytic properties of a crystalline zirconium tungstate, ZrW2O8, the material known mainly for its isotropic negative coefficient of thermal expansion, have been assessed for the liquid-phase selective oxidation of a range of organic substrates comprising CC, OH, S and other functional groups using aqueous hydrogen peroxide as the green oxidant. Samples of ZrW2O8 were prepared by hydrothermal synthesis and characterised by N2 adsorption, PXRD, SEM, EDX, FTIR and Raman spectroscopic techniques. Studies by IR spectroscopy of adsorbed probe molecules (CO and CDCl3) revealed the presence of Brønsted acidic and basic sites on the surface of ZrW2O8. It was demonstrated that ZrW2O8 is able to activate H2O2 under mild conditions and accomplish the epoxidation of CC bonds in alkenes and unsaturated ketones, oxidation of thioethers to sulfoxides and sulfones, along with the oxidation of alcoholic functions to produce ketones and aldehydes. The oxidation of tetramethylethylene and α-terpinene over ZrW2O8 revealed the formation of peroxidation products, 2,3-dimethyl-3-butene-2-hydroperoxide and endoperoxide ascaridole, respectively, indicating the involvement of singlet oxygen in the oxidation process. The ZrW2O8 catalyst preserves its structure and morphology under the turnover conditions and does not suffer from metal leaching. It can be easily recovered, regenerated by calcination, and reused without the loss of activity and selectivity.

Bioinspired Non-Heme Mn Catalysts for Regio- and Stereoselective Oxyfunctionalizations with H2 O2

In recent years, metalloenzymes-mediated highly selective oxidations of organic substrates under mild conditions have been inspiration for developing synthetic bioinspired catalyst systems, capable of conducting such processes in the laboratory (and, in the future, in industry), relying on easy-to-handle and environmentally benign oxidants such as H2 O2 . To date, non-heme manganese complexes with chiral bis-amino-bis-pyridylmethyl and structurally related ligands are considered as possessing the highest synthetic potential, having demonstrated the ability to mediate a variety of chemo- and stereoselective oxidative transformations, such as epoxidations, C(sp3 )-H hydroxylations and ketonizations, oxidative desymmetrizations, kinetic resolutions, etc. Furthermore, in the past few years non-heme Mn based catalysts have become the major platform for studies focused on getting insight into the molecular mechanisms of oxidant activation and (stereo)selective oxygen transfer, testing non-traditional hydroperoxide oxidants, engineering catalytic sites with enzyme-like substrate recognition-based selectivity, exploration of catalytic regioselectivity trends in the oxidation of biologically active substrates of natural origin. This contribution summarizes the progress in manganese catalyzed C-H oxygenative transformations of organic substrates, achieved essentially in the past 5 years (late 2018-2023).

The elusive reaction mechanism of Mn(II)-mediated benzylic oxidation of alkylarene by H2O2: a gem-diol mechanism or a dual hydrogen abstraction mechanism?

The direct oxygenation of alkylarenes at the benzylic position employing bioinspired nonheme catalysts has emerged as a promising strategy for the production of bioactive arene ketone scaffolds in drugs. However, the structure-activity relationship of the active species and the mechanism of these reactions remain elusive. Herein, the reaction mechanism of the Mn(II)-mediated benzylic oxygenation of phenylbutanoic acid (PBA) to 4-oxo-4-phenylbutyric acid (4-oxo-PBA) by H2O2 was investigated using density functional theory calculations. The calculated results demonstrated that the MnIII-OOH species (1) is a sluggish oxidant and needs to be converted to a high-valent manganese-oxo species (2). The conversion of PBA to 4-oxo-PBA by 2 occurs via the consecutive hydroxylation of PBA to 4-hydroxyl-4-phenylbutyric acid (4-OH-PBA) and the alcohol oxidation of 4-OH-PBA to 4-oxo-PBA. The hydroxylation of PBA proceeds via a novel hydride transfer/hydroxyl-rebound mechanism and the alcohol oxidation of 4-OH-PBA occurs via three pathways (gem-diol, dual hydrogen abstraction (DHA), and reversed-DHA pathways). The regio-selectivity of benzylic oxidations was caused by a strong π-π stacking interaction between the pyridine ring of the nonheme ligand and the phenyl ring of the substrate. These mechanistic findings enrich the knowledge of biomimetic alcohol oxidations and play a positive role in the rational design of new non-heme catalysts.

Tuning Reactivity of Zr-Substituted Keggin Phosphotungstate in Alkene Epoxidation through Balancing H2O2 Activation Pathways: Unusual Effect of Base

The Zr-monosubstituted Keggin-type dimeric phosphotungstate (Bu4N)8[{PW11O39Zr(μ-OH)(H2O)}2] (1) efficiently catalyzes epoxidation of C═C bonds in various kinds of alkenes, including terminal ones, with aqueous H2O2 as oxidant. Less sterically hindered double bonds are preferably epoxidized despite their lower nucleophilicity. Basic additives (Bu4NOH) in the amount of 1 equiv per dimer 1 suppress H2O2 unproductive decomposition, increase substrate conversion, improve yield of heterolytic oxidation products and oxidant utilization efficiency, and also affect regioselectivity of epoxidation, enhancing oxygen transfer to sterically hindered electron-rich C═C bonds. Acid additives produce a reverse effect on the substrate conversion and H2O2 efficiency. The reaction mechanism was explored using a range of test substrates, kinetic, and spectroscopic tools. The opposite effects of acid and base additives on alkene epoxidation and H2O2 degradation have been rationalized in terms of their impact on hydrolysis of 1 to form monomeric species, [PW11O39Zr(OH)(H2O)x]4- (1-M, x = 1 or 2), which favors H2O2 homolytic decomposition. The interaction of 1 with H2O2 has been investigated by HR-ESI-MS, ATR-FT-IR, and 31P NMR spectroscopic techniques. The combination of spectroscopic studies and kinetic modeling implicated the existence of two types of dimeric peroxo complexes, [Zr2(μ-η2:η2-O2){PW11O39}2(H2O)x]]8- and [{Zr(μ-η2-O2)}2(PW11O39)2(H2O)y]10-, along with monomeric Zr (hydro)peroxo species that begin to dominate at a high excess of H2O2. Both dimeric μ-η2-peroxo intermediates are inert toward alkenes under stoichiometric conditions. V-shape Hammett plots obtained for epoxidation of p-substituted styrenes suggested a biphilic nature of the active oxidizing species, which are monomeric Zr-hydroperoxo and peroxo species. Small basic additives increase the electrophilicity of the catalyst and decrease its nucleophilicity. HR-ESI-MS has identified a dimeric, most likely, bridging hydroperoxo species [{PW11O39Zr}2(μ-O)(μ-OOH)]9-, which may account for the improved epoxidation selectivity and regioselectivity toward sterically hindered C═C bonds.

A facile approach to phenothiazinones via catalytic aerobic oxidation: discovery of an antiproliferative agent

The production of bioactive pharmaceutical ingredients in a sustainable manner has become essential in the modern academic and industrial community. Herein, we report a chemically robust and sustainable aerobic oxidation for the synthesis of the phenothiazinone framework, using the commercially available TEMPO/HBF4/NaNO2 co-catalytic system under an ambient atmosphere. The reaction is highly efficient with broad scopes and excellent scalability. Preliminary activity screening led to the discovery of compound 3 as a potent antiproliferative agent. The green synthesis of a variety of sulfur containing heterocycles might encourage the pursuit of biologically valuable molecules in the medicinal field.

Recent advances in computational studies on Cu-catalyzed aerobic reactions: cooperation of copper catalysts and dioxygen

O2, one of the ideal oxidants, suffers from low solubility, low oxidizability, low selectivity and a triplet ground state when applied in organic synthesis. Biomimetic copper catalysis has been demonstrated to be a powerful method for activating and transforming O2 to conduct aerobic reactions for a long time. On the other hand, the structures of Cu-O2 complexes are complex with diverse downstream reactions, whereas active copper intermediates were rarely identified by experimental methods, making the mechanisms of many Cu-catalyzed aerobic reactions far from clear. In this context, computational studies emerged as an effective alternative to mechanistic studies on Cu-catalyzed aerobic reactions. This review introduces the relevant computational studies since 2012, focusing on showing the cooperation of copper catalysts and O2 in dehydrogenation, oxygenation and coupling reactions.

Benzoic Acid: Electrode-Regenerated Molecular Catalyst to Boost Cycloolefin Epoxidation

Stoichiometric oxidants are always consumed in organic oxidation reactions. For example, olefins react with peroxy acids to be converted to epoxy, while the oxidant, peroxy acid, is downgraded to carboxylic acid. In this paper, we aim to regenerate carboxylic acid into peroxy acid through electric water splitting at the anode, in order to construct an electrochemical catalytic cycle to accomplish the cycloolefin epoxidation reaction. Benzoic acid, which can be strongly adsorbed onto the anode and rapidly converted to peroxy acid, was selected to catalyze the cycloolefin epoxidation. Furthermore, the peroxybenzoic acid will be further activated on the electrode to fulfill the epoxidation and release the benzoic acid to complete the catalytic cycle. In this designed reaction cycle, benzoic acid acts as a molecular catalyst with the assistance of the electrode-generated reactive oxygen species (ROS). This method can successfully reform the consumable oxidants to molecular catalysts, which can be generalized to other green organic syntheses.

Synergy of Bulk Defects and Surface Defects on TiO2 for Highly Efficient Photocatalytic Production of H2O2

Artificial photosynthesis of H2O2 by TiO2-based semiconductors is a promising approach for H2O2 production. However, the efficiency of pristine TiO2 is still limited by rapid charge separation and low O2 adsorption capacity. Here, we found that the synergy between bulk and surface defects on TiO2 could overcome this demanding bottleneck. The introduced bulk defects act as hole acceptors to induce directional hole transfer, efficiently boosting electron-hole separation. Furthermore, the adsorption of O2 is strengthened by the introduced surface defects. Consequently, this synergy of bulk and surface defects on TiO2 significantly improves the photocatalytic performance, with a H2O2 production rate of 4560 μmol h-1 g-1, outperforming most reported TiO2-based photocatalysts. This work not only provides a new insight into the mechanism of surface/bulk defects in photocatalysis but also highlights that surface/bulk regulation holds great promise for achiveing efficient photocatalytic conversion.

Catalytic Desymmetrizing Baeyer-Villiger Oxidation of Quaternary Carbon-Containing Cyclobutane-1,3-diones

The first highly enantioselective Baeyer-Villiger oxidation of quaternary carbon-containing cyclobutane-1,3-diones using chiral phosphoric acid catalysis and commercially available oxidants was reported. According to the structure of the substrates, two optimized reaction conditions were developed to afford the corresponding chiral tetronic acid products in ≤93% and ≤95% ee values. This reaction offers the first catalytic asymmetric approach to chiral 5,5-disubstituted tetronic acid derivatives. The synthetic potential of this method has been demonstrated by the formal asymmetric synthesis of (-)-vertinolide and the first catalytic asymmetric total synthesis of plakinidone B.

Photosynthesis of Hydrogen Peroxide Based on g-C3 N4 : The Road of a Cost-Effective Clean Fuel Production

Emerging artificial photosynthesis promises to offer a competitive means for solar energy conversion and further solves the energy crisis facing the world. Hydrogen peroxide (H2 O2 ), which is considered as a benign oxidant and a prospective liquid fuel, has received worldwide attention in the field of artificial photosynthesis on account of the source materials are just oxygen, water, and sunlight. Graphitic carbon nitride (g-C3 N4 )-based photocatalysts for H2 O2 generation have attracted extensive research interest due to the intrinsic properties of g-C3 N4 . In this review, research processes for H2 O2 generation on the basis of g-C3 N4 , including development, fabrication, merits, and disadvantages, and the state-of-the-art methods to enhance the performance are summarized after a brief introduction and the mechanism analysis of an efficient catalytic system. Also, recent applications of g-C3 N4 -based photocatalysts for H2 O2 production are reviewed, and the significance of active sites and synthetic pathways are highlighted from the view of reducing barriers. Finally, this paper ends with some concluding remarks to reveal the issues and opportunities of g-C3 N4 -based photocatalysts for producing H2 O2 in a high yield.

Systematic Development of Vanadium Catalysts for Sustainable Epoxidation of Small Alkenes and Allylic Alcohols

The catalytic epoxidation of small alkenes and allylic alcohols includes a wide range of valuable chemical applications, with many works describing vanadium complexes as suitable catalysts towards sustainable process chemistry. But, given the complexity of these mechanisms, it is not always easy to sort out efficient examples for streamlining sustainable processes and tuning product optimization. In this review, we provide an update on major works of tunable vanadium-catalyzed epoxidations, with a focus on sustainable optimization routes. After presenting the current mechanistic view on vanadium catalysts for small alkenes and allylic alcohols' epoxidation, we argue the key challenges in green process development by highlighting the value of updated kinetic and mechanistic studies, along with essential computational studies.

Organoantimony Dihydroperoxides: Synthesis, Crystal Structures, and Hydrogen Bonding Networks

Despite growing interest in the potential applications of p-block hydroperoxo complexes, the chemistry of inorganic hydroperoxides remains largely unexplored. For instance, single-crystal structures of antimony hydroperoxo complexes have not been reported to date. Herein, we present the synthesis of six triaryl and trialkylantimony dihydroperoxides [Me₃Sb(OOH)₂, Me₃Sb(OOH)₂·H₂O, Ph₃Sb(OOH)₂·0.75(C₄H₈O), Ph₃Sb(OOH)₂·2CH₃OH, pTol₃Sb(OOH)₂, pTol₃Sb(OOH)₂·2(C₄H₈O)], obtained by the reaction of the corresponding dibromide antimony(V) complexes with an excess of highly concentrated hydrogen peroxide in the presence of ammonia. The obtained compounds were characterized by single-crystal and powder X-ray diffraction, Fourier transform infrared and Raman spectroscopies, and thermal analysis. The crystal structures of all six compounds reveal hydrogen-bonded networks formed by hydroperoxo ligands. In addition to the previously reported double hydrogen bonding, new types of hydrogen-bonded motifs formed by hydroperoxo ligands were found, including infinite hydroperoxo chains. Solid-state density functional theory calculation of Me₃Sb(OOH)₂ revealed reasonably strong hydrogen bonding between OOH ligands with an energy of 35 kJ/mol. Additionally, the potential application of Ph₃Sb(OOH)₂·0.75(C₄H₈O) as a two-electron oxidant for the enantioselective epoxidation of olefins was investigated in comparison with Ph₃SiOOH, Ph₃PbOOH, t-BuOOH, and H₂O₂.

Atom-Economical Syntheses of Dihydropyrroles Using Flavin-Iodine-Catalyzed Aerobic Multistep and Multicomponent Reactions

Herein, we report facile, atom-economical syntheses of multisubstituted 2,3-dihydropyrroles using flavin-iodine-catalyzed aerobic oxidative multistep transformations of chalcones with β-enamine ketones or 1,3-dicarbonyl compounds and amines. Exploiting coupled flavin-iodine catalysis, the multistep reaction, including C-C and C-N bond formation, is promoted only by the consumption of O₂ (1 atm), thus allowing aerobic oxidative synthesis that generates green H₂O as the only waste.

Alternatives to water oxidation in the photocatalytic water splitting reaction for solar hydrogen production

The photocatalytic water splitting process to produce H₂ is an attractive approach to meet energy demands while achieving carbon emission reduction targets. However, none of the current photocatalytic devices meets the criteria for practical sustainable H₂ production due to their insufficient efficiency and the resulting high H₂ cost. Economic viability may be achieved by simultaneously producing more valuable products than O₂ or integrating with reforming processes of real waste streams, such as plastic and food waste. Research over the past decade has begun to investigate the possibility of replacing water oxidation with more kinetically and thermodynamically facile oxidation reactions. We summarize how various alternative photo-oxidation reactions can be combined with proton reduction in photocatalysis to achieve chemical valorization with concurrent H₂ production. By examining the current advantages and challenges of these oxidation reactions, we intend to demonstrate that these technologies would contribute to providing H₂ energy, while also producing high-value chemicals for a sustainable chemical industry and eliminating waste.

Aerobic cross-dehydrogenative coupling of toluenes and o-phenylenediamines by flavin photocatalysis for the facile synthesis of benzimidazoles

Herein, we demonstrate a green atom-economical synthesis of benzimidazoles via the flavin-photocatalysed aerobic oxidative cross-dehydrogenative coupling of toluenes and o-phenylenediamines. The proposed metal-free reaction proceeds in methanol/H₂O under visible light irradiation by consuming only molecular oxygen from atmospheric air and produces only water as waste.

A Common Active Intermediate in the Oxidation of Alkenes, Alcohols and Alkanes with H2O2 and a Mn(II)/Pyridin-2-Carboxylato Catalyst

The mechanism and the reactive species involved in the oxidation of alkenes, and alcohols with H2O2, catalysed by an in situ prepared mixture of a MnII salt, pyridine-2-carboxylic acid and a ketone is elucidated using substrate competition experiments, kinetic isotope effect (KIE) measurements, and atom tracking with 18O labelling. The data indicate that a single reactive species engages in the oxidation of both alkenes and alcohols. The primary KIE in the oxidation of benzyl alcohols is ca. 3.5 and shows the reactive species to be selective despite a zero order dependence on substrate concentration, and the high turnover frequencies (up to 30 s-1) observed. Selective 18O labelling identifies the origin of the oxygen atoms transferred to the substrate during oxidation, and is consistent with a highly reactive, e. g., [MnV(O)(OH)] or [MnV(O)2], species rather than an alkylperoxy or hydroperoxy species.

Revisiting the Mukaiyama-type epoxidation for the conversion of styrene into styrene carbonate in the presence of O2 and CO2

Alkene epoxidation using the Mukaiyama process involving O2 and a sacrificial aldehyde, as the first step of the global alkene oxidative carboxylation, does not necessarily require a metal catalyst.

Redox-active molecules as organocatalysts for selective oxidative transformations - an unperceived organocatalysis field

Organocatalysis is widely recognized as a key synthetic methodology in organic chemistry. It allows chemists to avoid the use of precious and (or) toxic metals by taking advantage of the catalytic activity of small and synthetically available molecules. Today, the term organocatalysis is mainly associated with redox-neutral asymmetric catalysis of C-C bond-forming processes, such as aldol reactions, Michael reactions, cycloaddition reactions, etc. Organophotoredox catalysis has emerged recently as another important catalysis type which has gained much attention and has been quite well-reviewed. At the same time, there are a significant number of other processes, especially oxidative, catalyzed by redox-active organic molecules in the ground state (without light excitation). Unfortunately, many of such processes are not associated in the literature with the organocatalysis field and thus many achievements are not fully consolidated and systematized. The present article is aimed at overviewing the current state-of-art and perspectives of oxidative organocatalysis by redox-active molecules with the emphasis on challenging chemo-, regio- and stereoselective CH-functionalization processes. The catalytic systems based on N-oxyl radicals, amines, thiols, oxaziridines, ketone/peroxide, quinones, and iodine(I/III) compounds are the most developed catalyst types which are covered here.