Electrospray-Printed Three-Tiered Composite Membranes with Enhanced Mass Transfer Coefficients for Phenol Removal in an Aqueous-Aqueous Membrane Extractive Process

Interlayered Interface of a Thin Film Composite Janus Membrane for Sieving Volatile Substances in Membrane Distillation

Hypersaline wastewater treatment using membrane distillation (MD) has gained significant attention due to its ability to completely reject nonvolatile substances. However, a critical limitation of current MD membranes is their inability to intercept volatile substances owing to their large membrane pores. Additionally, the strong interaction between volatile substances and MD membranes underwater tends to cause membrane wetting. To overcome these challenges, we developed a dual-layer thin film composite (TFC) Janus membrane through electrospinning and sequential interfacial polymerization of a polyamide (PA) layer and cross-linking a polyvinyl alcohol/polyacrylic acid (PP) layer. The resulting Janus membrane exhibited high flux (>27 L m^-2 h^-1), salt rejection of ∼100%, phenol rejection of ∼90%, and excellent resistance to wetting and fouling. The interlayered interface between the PA and PP layer allowed the sieve of volatile substances by limiting their dissolution-diffusion, with the increasing hydrogen bond network formation preventing their transport. In contrast, small water molecules with powerful dynamics were permeable through the TFC membrane. Both experimental and molecular dynamics simulation results elucidated the sieving mechanism. Our findings demonstrate that this type of TFC Janus membrane can serve as a novel strategy to design next-generation MD membranes against volatile and non-volatile contaminants, which can have significant implications in the treatment of complex hypersaline wastewater.

Enhancing quorum quenching media with 3D robust electrospinning coating: A novel biofouling control strategy for membrane bioreactors

Bacterial quorum quenching (QQ) is an effective strategy for controlling biofouling in membrane bioreactor (MBR) by interfering the releasing and degradation of signal molecules during quorum sensing (QS) process. However, due to the framework feature of QQ media, the maintenance of QQ activity and the restriction of mass transfer threshold, it has been difficult to design a more stable and better performing structure in a long period of time. In this research, electrospun fiber coated hydrogel QQ beads (QQ-ECHB) were fabricated by using electrospun nanofiber coated hydrogel to strengthen layers of QQ carriers for the first time. The robust porous PVDF 3D nanofiber membrane was coated on the surface of millimeter-scale QQ hydrogel beads. Biocompatible hydrogel entrapping quorum quenching bacteria (sp.BH4) was employed as the core of the QQ-ECHB. In MBR with the addition of QQ-ECHB, the time to reach transmembrane pressure (TMP) of 40 kPa was 4 times longer than conventional MBR. The robust coating and porous microstructure of QQ-ECHB contributed to keeping a lasting QQ activity and stable physical washing effect at a very low dosage (10g beads/5L MBR). Physical stability and environmental-tolerance tests also verified that the carrier can maintain the structural strength and keep the core bacteria stable when suffering long-term cyclic compression and great fluctuations in sewage quality.

Electrospun nanofibrous poly(ether-block-amide) membrane for removing biogenic amines in acidic wastewater from the yellow rice wine factory

Compared with other techniques for wastewater treatment, adsorption offers an effective, economical and ecofriendly way to reduce the content of biogenic amines. Herein, the poly(ether-block-amide) (PEBA 2533) membranes were employed as the adsorbent to remove histamine, putrescine, cadaverine and tyramine in the synthetic and real wastewater from a local yellow rice wine factory. Electrospun PEBA membranes consisting of fine nanofibers were successfully obtained without the addition of surfactant for the first time. Characteristics of the prepared membranes were evaluated by their morphology, wetting behaviors and mechanical properties. Adsorption performance of the nanofibrous membrane was investigated in comparison to the dense membrane prepared by conventional casting. The fibrous membrane exhibited much higher adsorption rate over 10 times to the dense membrane along with 1.5 times more adsorption capacity towards the amines. In addition, the as-prepared membrane showed a promising reusability in the real wastewater treatment. The good balance of its chemical stability, adsorption capacity, selectivity, removal efficiency and reusability endows the electrospun membrane with an outstanding potential to be applied in the acidic wastewater treatment for the yellow rice wine industry.

Biochar-based asymmetric membrane for selective removal and oxidation of hydrophobic organic pollutants

Hydrophobic organic pollutants (HOCs) in the complex groundwater and soil pose serious technical challenges for sustainable remediation. Herein, an asymmetric membrane (PCAM), inspired by the plant cuticle, was comprised of a top polydimethylsiloxane layer being selectively penetrable to HOCs from complex solution with humic acid, followed by transfer and catalyst layers with biochar pyrolyzed by 300 °C (BC300) and 700 °C (BC700). The PCAM triggered the advanced oxidation of the coming pollutant. The graphitized biochar layer of the PCAM acted as catalysts that induced HOC removal through a non-radical oxidation pathway. Compared to one type biochar membrane, the sequential multi-biochar composite membrane had a faster removal efficiency. The greater uptake and transport performance of multi-biochar composite membrane could be due to the larger pore size and distribution properties of PCAM physicochemical properties and oxidative degradation of peroxymonosulfate. The developed PCAM technology benefits from selective adsorption and catalytic oxidation and has the potential to be applied in complex environmental restoration.

Selective Separation Catalysis Membrane for Highly Efficient Water and Soil Decontamination via a Persulfate-Based Advanced Oxidation Process

The application of sulfate radical advanced oxidation for organic pollutant removal has been hindered by some shortages such as the recycling difficulty of a powered catalyst, the low utilization efficiency of oxidants, and the secondary pollution (including soil acidification) after reaction. Herein, we fabricate a selective separation catalysis membrane (SSCM) for a highly efficient and environment-friendly persulfate-based advanced oxidation process. The SSCM comprises a top polydimethylsiloxane layer which is selectively penetrable to hydrophobic organic pollutants, followed by a catalyst layer with a magnetic nitrogen-doped porous carbon material, targeting the advanced oxidation of the selected pollutants. Compared with the catalyst in powder form, such SSCM devices significantly reduced the dosage of peroxymonosulfate by more than 40% and the catalyst dosage by 97.8% to achieve 80% removal of phenol with the coexistence of 20 mg L^-1 humic acid (HA). The SSCM can extract target pollutants while rejecting HA more than 91.43% for 100 h. The pH value in the receiving solution demonstrated a significant reduction from 7.01 to 3.00. In comparison, the pH value in the feed solution varied from 6.05 to a steady 4.59. The results can be ascribed to the specific functionality for the catalyst anchored, natural organic matter isolation, and reaction compartmentation provided by SSCMs. The developed SSCM technology is beneficial for catalysts reused in remediation practices, saving oxidant dosage, and avoiding acidification of soil and water, thus having tremendous application potential.

Mitigation of membrane biofouling via immobilizing Ag-MOFs on composite membrane surface for extractive membrane bioreactor

The extractive membrane bioreactor (EMBR) combines an extractive membrane process and bioreactor to treat highly saline recalcitrant organic wastewater, in which the organic contaminations diffuse through a semi-permeable polydimethysiloxane (PDMS) composite membrane from the feed wastewater to the receiving biomedium. During the long-term EMBR operation, membrane biofouling is an inevitable phenomenon, which is one of the main obstacles impeding its wide applications. The excessive biofilm deposited on membrane surface could significantly reduce the organic mass transfer coefficient of composite membranes by more than 40%. Therefore, in this work, the silver (Ag)-metal organic frameworks (MOFs) were synthesized and immobilized on the PDMS surface of nanofibrous composite membranes to mitigate the membrane biofouling. The robustness of Ag-MOFs coating on membrane surface was well demonstrated by ultrasonic treatment. In addition, the silver nanoparticles (AgNPs) were coated on the PDMS surface of composite membranes for comparison. In contrast with the unmodified composite membrane #M0, the AgNPs-coated (#M1) and Ag-MOFs modified (#M2) composite membranes possessed less hydrophobic and negatively charged surfaces due to the coating layers. Although the modified membranes exhibited lower phenol mass transfer coefficients (k0's) in the aqueous-aqueous extractive membrane process due to these additional modification layers, both #M1 and #M2 displayed better long-term performance in the 12-days continuous EMBR operations due to their excellent anti-biofouling properties. Moreover, #M2 exhibited the most stable EMBR performance among the composite membranes developed in this work and other reported membranes with a finally stabilized k0 of 33.0 × 10-7 m/s (89% of initial k0). The least amounts of proteins, polysaccharides and total suspended solids (TSS) on the surface of tested #M2 also demonstrated its outstanding biofouling resistance. This excellent anti-biofouling performance should be attributed to the stable, controlled and long-lasting Ag+release from Ag-MOFs, as well as its less hydrophobic and negative charged surface properties, which made #M2 undergo the k0's increasing and gradual stabilization stages in the long-term EMBR operations.