Enhanced Recovery of Per- and Polyfluoroalkyl Substances (PFASs) from Impacted Soils Using Heat Activated Persulfate

Oxygen/sulfate radicals-generating CaS2O8 nanosonosensitizers induce PANoptosis and calcium overload for enhanced peritoneal metastasis immunotherapy

Peritoneal metastasis (PM) is typically intractable by immunotherapy due to an immunosuppressive microenvironment and the peritoneal-plasma barrier. Sonodynamic therapy (SDT) presents unique advantages of noninvasive in situ treatment and the potential for antitumor immune activation. Building upon SDT technology, the study reports on a novel biodegradable sonosensitizer, CaS2O8, characterized by a narrow bandgap, abundant oxygen vacancies and a rapid ultrasound (US) response for abdominal SDT. Such sonosensitizer only produces lethal reactive oxygen species (ROS) after US irradiation, which is nontoxic in a physiological environment. After US irradiation, CaS2O8 yields a large amount of sulfate radical (SO4-), as well as sonodynamic related ROS (OH, and 1O2), which exerts a synergistic effect with Ca2+ overload to induce Z-conformation nucleic acid by augmenting oxidative damage. As a result, the PANoptosis is initiated through the ZBP1/RIPK3 pathway in tumor cells. This inflammatory cell death leads to a multi-faceted release of tumor cell contents which serve as an in situ tumor antigen to induce a robust antitumor immune response. Notably, the precision sono-immunotherapy enhances the infiltration of T cells into tumors by transforming an immunosuppressive phenotype into an immunostimulatory one. Therefore, targeting PANoptosis by CaS2O8-induced SDT can provide an alternative or additional clinical treatment and prolonged survival outcome for patients with PM.

Current trends and patterns of PFAS in agroecosystems and environment: A review

Per- and polyfluoroalkyl substances (PFASs) are one of the more well-known highly persistent organic pollutants with potential risks to agroecological systems. These compounds are of global concern due to their persistence and mobility, and they often lead to serious impacts on environmental, agricultural, and human health. In the past 20 years, the number of science publications on PFAS has risen; despite this, certain fundamental questions about PFAS occurrence, sources, mechanism of transport, and impacts on agroecosystems and the societies dependent on them are still open and evolving. There is a lack of systematic and comprehensive analysis of these concerns in agroecosystems. Therefore, we reviewed the current literature on PFAS with a focus on agroecosystems; our review suggests that PFASs are nearly ubiquitous in agricultural systems. We found the current research has limitations in analyzing PFAS in complex matrices because of their small size, distribution, and persistence within various environmental systems. There is consistency in the properties and composition of PFAS in and around agroecosystems, suggesting evidence of shared sources and similar components within different tropic levels. The introduction of new and varied sources of PFAS appear to be growing, adding to their residual accumulation in environmental matrices and leading to possible new types of chemical compounds that are difficult to assess accurately. This review determines existing research trends, understands mechanisms and incidence of PFAS within agroecosystems and their impact on human health, and thereby recommends further studies to remedy research gaps.

Mechanisms of heating-electrokinetic co-driven perfluorooctanoic acid (PFOA) adsorption on zeolite

Slow release of emerging contaminants limits their accessibility from soil to pore water, constraining the treatment efficiency of physio-chemical treatment sites. DC fields mobilize organic contaminants and influence their interactions with geo-matrices such as zeolites. Poor knowledge, however, exists on the joint application of heating and electrokinetic approaches on perfluorooctanoic acid (PFOA) transport in porous media. Here, we investigated electrokinetic PFOA transport in zeolite-filled percolation columns at varying temperatures. Variations of pseudo-second-order kinetic constants (kPSO) were correlated to the liquid viscosity variations (η) and elctroosmotic flow velocities (vEOF). Applying DC fields and elevated temperature significantly (>37%) decreased PFOA sorption to zeolite. A good correlation between η, vEOF, and kPSO was found and used to develop an approach interlinking the three parameters to predict the joint effects of DC fields and temperature on PFOA sorption kinetics. These findings may give rise to future applications for better tailoring PFOA transport in environmental biotechnology.

Surfactant-assisted biodegradation of nitrobenzene in groundwater by sulfided nano-zero valent iron activated persulfate: Synergistic effect, mechanism, and application

Groundwater contamination by dense non-aqueous phase liquids (DNAPLs), particularly nitrobenzene, represents a significant environmental challenge due to their chemical stability, persistence, and low solubility. This study aims to develop a synergistic approach for the biodegradation of nitrobenzene in groundwater, leveraging a combined system of Tween 80-assisted solubilization, sulfidized nano-zero valent iron (S-nZVI), and persulfate (PS) activation. The reduction process is facilitated by S-nZVI, while PS activation generates strong oxidizing radicals, and Tween 80 enhances nitrobenzene solubilization, thus improving the overall treatment efficacy. Laboratory experiments, including both batch and column studies, were conducted to evaluate the performance of this approach. Furthermore, a persulfate slow-release gel system was introduced to provide sustained activation, leading to improved long-term degradation efficiency. The results demonstrated that the synergistic combination of S-nZVI, PS, and Tween 80 led to significantly enhanced degradation of nitrobenzene and its byproduct aniline, achieving degradation rates of up to 96.74% for nitrobenzene and 100% for aniline after 6 h under optimal conditions. Additionally, the oxidation rate of aniline reached 91.53% within 5 min when the optimal dosage of 1.2 mM PS was used. The Tween-80/S-nZVI/PS slow-release gel system further achieved cumulative degradation rates of 87.49% for nitrobenzene over 14 pore volumes in a column study, demonstrating its potential for practical applications in groundwater remediation. These findings provide a promising new direction for the remediation of contaminated groundwater.

Biotransformation of PFAA Precursors by Oxygenase-Expressing Bacteria in AFFF-Impacted Groundwater and in Pure-Compound Studies with 6:2 FTS and EtFOSE

Numerous US drinking water aquifers have been contaminated with per- and polyfluoroalkyl substances (PFAS) from fire-fighting and fire-training activities using aqueous film-forming foam (AFFF). These sites often contain other organic compounds, such as fuel hydrocarbons and methane, which may serve as primary substrates for cometabolic (i.e., nongrowth-linked) biotransformation reactions. This work investigates the abilities of AFFF site relevant bacteria (methanotrophs, propanotrophs, octane, pentane, isobutane, toluene, and ammonia oxidizers), known to express oxygenase enzymes when degrading their primary substrates, to biotransform perfluoroalkyl acid (PFAA) precursors to terminal PFAAs. Microcosms containing AFFF-impacted groundwater, 6:2 fluorotelomer sulfonate (6:2 FTS), or N-ethylperfluorooctane sulfonamidoethanol (EtFOSE) were inoculated with the aerobic cultures above and incubated for 4 and 8 weeks at 22 °C. Bottles were sacrificed, extracted, and subjected to target, nontarget, and suspect screening for PFAS. The PFAA precursors 6:2 FTS, N-sulfopropyldimethyl ammoniopropyl perfluorohexane sulfonamide (SPrAmPr-FHxSA), and EtFOSE transformed up to 99, 71, and 93%, respectively, and relevant daughter products, such as the 6:1 fluorotelomer ketone sulfonate (6:1 FTKS), were identified in quantities previously not observed, implicating oxygenase enzymes. This is the first report of a suite of site relevant PFAA precursors being transformed in AFFF-impacted groundwater by bacteria grown on substrates known to induce specific oxygenase enzymes. The data provide crucial insights into the microbial transformation of these compounds in the subsurface.

Mobilization of per- and poly-fluoroalkyl substances (PFAS) in soils with different organic matter contents

There is considerable interest in addressing soils contaminated with per- and polyfluoroalkyl substances (PFAS) because of the PFAS in the environment and associated health risks. The neutralization of PFAS in situ is challenging. Consequently, mobilizing the PFAS from the contaminated soils into an aqueous solution for subsequent handling has been pursued. Nonetheless, the efficiency of mobilization methods for removing PFAS can vary depending on site-specific factors, including the types and concentrations of PFAS compounds, soil characteristics. In the present study, the removal of perfluorooctanoate (PFOA) and perfluorooctane sulfonate (PFOS) from artificially contaminated soils was investigated in a 2D laboratory setup using electrokinetic (EK) remediation and hydraulic flushing by applying a hydraulic gradient (HG) for a duration of 15 days. The percent removal of PFOA by EK was consistent (∼80%) after a 15-day treatment for all soils. The removal efficiency of PFOS by EK significantly varied with the OM content, where the PFOS removal increased from 14% at 5% OM to 60% at 50% OM. With HG, the percent removal increased for both PFOA and PFOS from about 20% at 5% OM up to 80% at 75% OM. Based on the results, the mobilization of PFAS from organic soil would be appropriate using both hydraulic flushing and EK considering their applicability and advantages over each other for site-specific factors and requirements.

Lithium-ion battery components are at the nexus of sustainable energy and environmental release of per- and polyfluoroalkyl substances

Lithium-ion batteries (LiBs) are used globally as a key component of clean and sustainable energy infrastructure, and emerging LiB technologies have incorporated a class of per- and polyfluoroalkyl substances (PFAS) known as bis-perfluoroalkyl sulfonimides (bis-FASIs). PFAS are recognized internationally as recalcitrant contaminants, a subset of which are known to be mobile and toxic, but little is known about environmental impacts of bis-FASIs released during LiB manufacture, use, and disposal. Here we demonstrate that environmental concentrations proximal to manufacturers, ecotoxicity, and treatability of bis-FASIs are comparable to PFAS such as perfluorooctanoic acid that are now prohibited and highly regulated worldwide, and we confirm the clean energy sector as an unrecognized and potentially growing source of international PFAS release. Results underscore that environmental impacts of clean energy infrastructure merit scrutiny to ensure that reduced CO2 emissions are not achieved at the expense of increasing global releases of persistent organic pollutants.

Effects of Temperature and DC Electric Fields on Perfluorooctanoic Acid Sorption Kinetics to Activated Carbon

Sorption to activated carbon is a common approach to reducing environmental risks of waterborne perfluorooctanoic acid (PFOA), while effective and flexible approaches to PFOA sorption are needed. Variations in temperature or the use of electrokinetic phenomena (electroosmosis and electromigration) in the presence of external DC electric fields have been shown to alter the contaminant sorption of contaminants. Their role in PFOA sorption, however, remains unclear. Here, we investigated the joint effects of DC electric fields and the temperature on the sorption of PFOA on activated carbon. Temperature-dependent batch and column sorption experiments were performed in the presence and absence of DC fields, and the results were evaluated by using different kinetic sorption models. We found an emerging interplay of DC and temperature on PFOA sorption, which was linked via the liquid viscosity (η) of the electrolyte. For instance, the combined presence of a DC field and low temperature increased the PFOA loading up to 38% in 48 h relative to DC-free controls. We further developed a model that allowed us to predict temperature- and DC field strength-dependent electrokinetic benefits on the drivers of PFOA sorption kinetics (i.e., intraparticle diffusivity and the film mass transfer coefficient). Our insights may give rise to future DC- and temperature-driven applications for PFOA sorption, for instance, in response to fluctuating PFOA concentrations in contaminated water streams.

Field test of thermally activated persulfate for remediation of PFASs co-contaminated with chlorinated aliphatic hydrocarbons in groundwater

The co-occurrence of per- and polyfluoroalkyl substances (PFASs) and chlorinated aliphatic hydrocarbons (CAHs) in groundwater has drawn increased attention in recent years. No studies have been conducted concerning the oxidative degradation of PFASs and/or CAHs by in situ thermally activated persulfate (TAP) in groundwater, primarily due to the difficulty in cost-effectively achieving the desired temperature in the field. In this study, the effects and mechanisms of PFASs degradation by in situ TAP at a site with PFASs and CAHs co-contaminants were investigated. The target temperature of 40.0-70.0 °C was achieved in groundwater, and persulfate was effectively distributed in the demonstration area - the combination of which ensured the degradation of PFASs and CAHs co-contaminants by in situ TAP. It was demonstrated that the reductions of perfluoroalkyl carboxylic acids (PFCAs) concentration in all monitoring wells were in the range of 43.7 %-66.0 % by in situ TAP compared to those maximum rebound values in groundwater, whereas no effective perfluoroalkane sulfonic acids (PFSAs) degradation was observed. The conversion of perfluoroalkyl acids (PFAAs) precursors was one of the main factors leading to the increase in PFCAs concentrations in groundwater during in situ TAP. CAHs were effectively degraded in most monitoring wells, and furthermore, no inhibitory effects of CAHs and Cl- on the degradation of PFASs were observed due to the presence of sufficient persulfate. Additionally, there were significant increases in SO42- concentrations and reductions of pH values in groundwater due to in situ TAP, warranting their long-term monitoring in groundwater. The integrated field and laboratory investigations demonstrated that the reductions in PFCAs and CAHs concentrations can be achieved by the oxidative degradation of in situ TAP.

Synergetic degradation of perfluorooctanoic acid (PFOA) in soil using electrical resistance heating induced persulfate activation

Due to wastes from production of fluorinated materials and use of aqueous fire-fighting foams (AFFF), soils contaminated with perfluorooctanoic acid (PFOA) is of concern. However, current PFOA-contaminated soil disposal techniques have relatively low degradation efficiencies and are not suitable for on-site remediation. In this study, an electrical resistance heating (ERH) device and a box experimental device were used to study whether ERH induced persulfate activation (ERH/PS) could degrade PFOA in the soil. The results indicated that single ERH and single PS addition could not effectively degrade PFOA (with approximately 0.3 % and 3.9 % degradation after 9 h, respectively), while the degradation efficiency of PFOA with coupled ERH/PS could reach 87.3 % after 9 h of reaction. Moreover, effects of PS content, heating temperature, and soil organic matter on the degradation of PFOA were explored. During the ERH/PS process, PFOA was gradually transformed into short chain perfluorinated compounds and finally mineralized to fluoride ions. Finally, using a box experimental device, PS was effectively transported to the target contaminated area through electrokinetic (EK)-assisted delivery. After activating PS through ERH, the degradation rate of PFOA could reach 95.5 %. This is a novel study demonstrating the feasibility of ERH induced PS activation to degrade PFOA in soil, which provides a potential on-site strategy for remediation of PFOA-contaminated soil.

Enhanced electrokinetic remediation by magnetic induction for the treatment of co-contaminated soil

The electroplating industry site is an important reservoir of per- and poly-fluoroalkyl substances (PFASs) and heavy metals. In this work, a novel electrokinetic in-situ chemical oxidation system was established to restore an actual soil co-contaminated with high concentrations of heavy metals (Cr, Cu, Zn and Ni) and PFASs. Potassium persulfate (PS, K₂S₂O₈) and industrial waste steel slag were used as the oxidant and activator, respectively. The steel slag was evenly added in the soil, while PS was dosed in the cathode chamber. Citric acid fermentation broth produced by Aspergillus niger was added in the anode chamber to act as the metal chelator. A periodic alternating magnetic field was employed to enhance the catalytic performance of steel slag for PS. After 15-day treatment, 86.7% of PFASs and 87.2% of heavy metals were removed without PFASs accumulation in the electrolyte, with a defluorination percentage of 79.2%. The remediated soil had no phytotoxicity for wheat seed growth based on 7-day cultivation results. The quality of remediated soil could reach the national Class II criteria for residential use. Electron paramagnetic resonance spectroscopy analysis demonstrated that SO₄^•- and ^•OH were the major oxidative radicals responsible for PFASs degradation. Adding steel slag in the soil performed better than that in the cathode chamber based on pollutant removal and alleviating soil acidification. Magnetic induction could enhance PS activation by promote the corrosion of steel slag and thermal activation, thus increasing electrical current and electroosmotic flow, enhancing the transport of citric acid and PS, significantly improving the removal efficiency of heavy metals and PFASs.

Tailoring Amphiphilic Copolymers for Improved Aqueous Foam Stability

Amphiphilic copolymers of various-molecular-weight (MW) poly(ethylene glycol) (PEG) were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The first PEG series, poly(ethylene glycol)monomethacrylate (PEGMA, average Mn 200 and 400 MW), contained an -OH terminal group, and the second series, poly(ethylene glycol) monomethyl ether monomethacrylate (PEGMMA, average Mn 200, 400, and 1000 MW), possessed an -OCH₃ terminal group. A total of five PEG-functionalized copolymers contained the same hydrophobic monomer, butyl acrylate (BA), and were successfully reproduced via a one-pot synthesis. The resulting PEG-functionalized copolymers provide a systematic trend of properties including surface tension, critical micelle concentration (CMC), cloud point (CP), and foam lifetime based on the average MW of the PEG monomer and final polymer properties. In general, the PEGMA series produced more stable foams with PEGMA200 demonstrating the least change in foam height with time over a 10 min period. The important exception is that at elevated temperatures, the PEGMMA1000 copolymer had longer foam lifetimes. The self-assembling copolymers were characterized by gel permeation chromatography (GPC), ¹H nuclear magnetic resonance (NMR), attenuated total reflection Fourier transform infrared (FTIR-ATR), CMC, surface tension, dynamic light scattering (DLS), as a foam using a dynamic foam analyzer (DFA), and foam lifetime at ambient and elevated temperatures. The copolymers described highlight the importance of the PEG monomer MW and terminal end group for surface interaction and final polymer properties for foam stabilization.

Occurrence of quantifiable and semi-quantifiable poly- and perfluoroalkyl substances in united states wastewater treatment plants

Both quantifiable and semi-quantifiable poly- and perfluoroalkyl substances (PFAS) were evaluated in the influent, effluent, and biosolids of 38 wastewater treatment plants. PFAS were detected in all streams at all facilities. For the means of the sums of detected, quantifiable PFAS concentrations were 98 ± 28 ng/L, 80 ± 24 ng/L, and 160,000 ± 46,000 ng/kg (dry weight basis) in the influent, effluent, and biosolids (respectively). In the aqueous influent and effluent streams this quantifiable PFAS mass was typically associated with perfluoroalkyl acids (PFAAs). In contrast, quantifiable PFAS in the biosolids were primarily polyfluoroalkyl substances that potentially serve as precursors to the more recalcitrant PFAAs. Results of the total oxidizable precursor (TOP) assay on select influent and effluent samples showed that semi-quantified (or, unidentified) precursors accounted for a substantial portion (21 to 88%) of the fluorine mass compared to that associated with quantified PFAS, and that this fluorine precursor mass was not appreciably transformed to perfluoroalkyl acids within the WWTPs, as influent and effluent precursor concentrations via the TOP assay were statistically identical. Evaluation of semi-quantified PFAS, consistent with results of the TOP assay, showed the presence of several classes of precursors in the influent, effluent, and biosolids; perfluorophosphonic acids (PFPAs) and fluorotelomer phosphate diesters (di-PAPs) occurred in 100 and 92% of biosolid samples, respectively. Analysis of mass flows showed that, for both quantified (on a fluorine mass basis) and semi-quantified PFAS, the majority of PFAS exited WWTPs through the aqueous effluent compared to the biosolids stream. Overall, these results highlight the importance of semi-quantified PFAS precursors in WWTPs, and the need to further understand the impacts of their ultimate fate in the environment.

Effect of clay content on the mobilization efficiency of per- and polyfluoroalkyl substances (PFAS) from soils by electrokinetics and hydraulic flushing

The need for the efficient remediation of soils impacted by per- and polyfluoroalkyl substances (PFAS) is substantially growing because of the notable upsurge in societal and regulatory awareness of this class of chemicals. To remediate PFAS-contaminated soils using mobilization approaches, the choice of appropriate techniques highly depends on the soil's composition, particularly the clay content, which significantly affects the soil's permeability. Here, we investigated the PFAS mobilization efficiency from soils with different clay contents by using two techniques: electrokinetic (EK) remediation and hydraulic flushing. Artificial kaolinite was added to a loamy sand soil to prepare four soil blends with clay contents of 5, 25, 50, and 75%, each contaminated with perfluorooctanoic acid (PFOA) and perfulorooctanesulfonic acid (PFOA) at 10,000 μg/kg. EK remediation was conducted by applying a low voltage (30 V) with a current of 100 mA, and hydraulic flushing was carried out by applying a hydraulic gradient (HG) with a slope of 6.7%. Results show that, with a 14-day treatment duration, the EK-mobilization efficiency was enhanced substantially with the increase of clay content (removal of PFOS increased from 20% at 5% clay to 80% at 75% clay), most likely due to the increase of electroosmotic flow due to the higher content of particles having a zeta potential (i.e., clay). For HG, increasing the clay content significantly suppressed the mobilization of PFAS (removal of PFOS decreased from 40% at 5% clay to 10% at 75% clay) due to a notable decrease in the soil's permeability. Based on the results, applying hydraulic flushing and washing techniques for mobilizing PFAS would be appropriate when treating permeable soils with a maximum clay content of about 25%; otherwise, other suitable mobilization techniques such as EKs should be considered.

Electrokinetically-delivered persulfate and pulsed direct current electric field induced transport, mixing and thermally activated in situ for remediation of PAHs contaminated soil

Herein, we proposed and proved a novel strategy that enhanced the delivery of persulfate (PS) to soil by electrokinetics (EK), and then applying a pulsed direct current (DC) electric field thermally activated the PS in situ, and synchronously promoted PS plume mixing, contaminants-free radicals reaction and continued to replenish PS to the soil, to achieve efficient degradation of contaminants in low permeability zones. Results showed that transport rate of PS in tested soil by EK was approximately 12.3 times than diffusion. Applying an irregular pulsed DC field maintained the targeted temperature (30-50 ℃) during activation phase, and generated two oxidative radicals (SO₄^∙-/∙OH). Concurrently, in the case, electromigration and electroosmosis have promoted the PS transport and the reactive mixing of PS/free radicals with polycyclic aromatic hydrocarbons (PAHs) contaminated soil and enhance the PAHs degradation. PS concentrations in pore fluid was characterized by an increase accompanied by continuous fluctuations. Eventually, in case of the long-term low-temperature activation (i.e., 30-40 ℃), a significant decreases (nearly 60%) in average concentration of PAHs in the whole soil cell was observed over 10 days. These results demonstrates that the novel strategy has great potentiality in the remediation of low permeability contaminated soil.

Recent advances in the remediation of perfluoroalkylated and polyfluoroalkylated contaminated sites

Per- and polyfluoroalkyl substances (PFASs) are compounds used since 1940 in various formulations in the industrial and consumer sectors due to their high chemical and thermal stability. In recent years, PFASs have caused global concern due to their presence in different water and soil matrices, which threatens the environment and human health. These compounds have been reported to be linked to the development of serious human diseases, including but not limited to cancer. For this reason, PFASs have been considered as persistent organic compounds (COPs) and contaminants of emerging concern (CECs). Therefore, this work aims to present the advances in remediation of PFASs-contaminated soil and water by addressing the current literature. The performance and characteristics of each technique were addressed deeply in this work. The reviewed literature found that PFASs elimination studies in soil and water were carried out at a laboratory and pilot-scale in some cases. It was found that ball milling, chemical oxidation and thermal desorption are the most efficient techniques for the removal of PFASs in soils, however, phyto-microbial remediation is under study, which claims to be a promising technique. For the remediation of PFASs-contaminated water, the processes of electrocoagulation, membrane filtration, ozofractionation, catalysis, oxidation reactions - reduction, thermolysis and destructive treatments with plasma have presented the best results. It is noteworthy that hybrid treatments have also proved to be efficient techniques in the removal of these contaminants from soil and water matrices. Therefore, the improvisation and implication of existing techniques on a field-scale are greatly warranted to corroborate the yields obtained on a pilot- and laboratory-scale.

Low-temperature persulfate activation by powdered activated carbon for simultaneous destruction of perfluorinated carboxylic acids and 1,4-dioxane

Carbonaceous materials have emerged as a method of persulfate activation for remediation. In this study, persulfate activation using powdered activated carbon (PAC) was demonstrated at temperatures relevant to groundwater (5-25 °C). At room temperature, increasing doses of PAC (1-20 g L^-1) led to increased persulfate activation (3.06 × 10^-6s^-1 to 2.10 × 10^-4 with 1 and 20 g L^-1 PAC). Activation slowed at lower temperatures (5 and 11 °C); however, substantial (>70 %) persulfate activation was achieved. PAC characterization showed that persulfate is activated at the surface of the PAC, as indicated by an increase in the PAC C:O ratio. Similarly, electron paramagnetic resonance (EPR) spectroscopy studies with a spin trapping agents (5,5-dimethyl-1-pyrroline N-oxide (DMPO)) and 2,2,6,6-tetramethylpiperidine (TEMP) revealed that singlet oxygen was not the main oxidizing species in the reaction. DMPO was oxidized to form 5,5-dimethylpyrrolidone-2(2)-oxyl-(1) (DMPOX), which forms in the presence of strong oxidizers, such as sulfate radicals. The persulfate/PAC system is demonstrated to simultaneously degrade both perfluorooctanoic acid (PFOA) and 1,4-dioxane at room temperature and 11 °C. With a 20 g L^-1 PAC and 75 mM persulfate, 80 % and 70 % of the PFOA and 1,4-dioxane, respectively, degraded within 6 h at room temperature. At 11 °C, the same PAC and persulfate doses led to 57% dioxane degradation and 54 % PFOA degradation within 6 h. Coupling PAC with persulfate offers an effective, low-cost treatment for simultaneous destruction of 1,4-dioxane and PFOA.

An Integrated Approach for Determination of Total Per- and Polyfluoroalkyl Substances (PFAS)

Per- and polyfluoroalkyl substances (PFAS) are difficult to analyze in environmental media due challenges such as extraction recovery and lack of analytical standards. The total oxidizable precursor (TOP) assay and suspect screening analysis coupled with semiquantitative (SQ) concentration estimates are two approaches to assess total PFAS in environmental media, but studies are needed to optimize workstreams for total PFAS analysis. This study applied two soil extraction methods, TOP assay, and SQ analysis to three aqueous film-forming foams (AFFFs) and three AFFF-impacted soils. In soils, the total PFAS estimated with results from an extraction method utilizing sequential acidic and basic solvents led to a 35% increase in precursors during TOP assay relative to results from a basic solvent only extraction in one of three soils tested, but concentrations did not increase significantly in remaining soils. Furthermore, sample-specific dilution schemes were required to overcome matrix effects caused by the acidic extraction step that influenced estimates of total PFAS by SQ analysis. The results highlight that there is not an advantage to routine application of an acid extraction step in PFAS-impacted soils. In three AFFFs, suspect screening of post-TOP samples identified eight classes of PFAS present after oxidation. Concentrations of three classes increased, suggesting they are new TOP end points. Concentrations of the remaining five classes either remained constant after TOP or exhibited slight decreases. As a result, combined TOP and SQ workstreams may yield the most representative assessment of total PFAS composition and concentration. The eight classes of PFAS present after TOP did not degrade in harsh conditions. Some are structurally similar to PFCAs and PFSAs and are known to occur in the environment, suggesting a similar degree of persistence and a need for more routine monitoring.

The development of diffusive equilibrium, high-resolution passive samplers to measure perfluoroalkyl substances (PFAS) in groundwater

Per- and poly-fluoroalkyl substances (PFAS) are a group of anthropogenic, highly recalcitrant organic compounds consisting of thousands of individual species that are of increasing importance as groundwater contaminants. In-situ measurements of PFAS would be useful to better understand vertical profiles and mobility, contamination in partially saturated media, and to reduce sampling artifacts associated with groundwater collection and analysis. Diffusive equilibrium, high-resolution passive samplers (HRPPs) can be directly driven (>10 m) in sediments or groundwater. The samplers equilibrate with porewater through diffusion across the sampler membrane, providing high spatial resolution (sample every 20 cm) porewater concentrations of dissolved species. The objective of this study was to develop an HRPP to measure PFAS in contaminated groundwater and saturated media. To achieve this objective, a screening study was conducted to demonstrate quantitative measurement of selected PFAS as well as the kinetics of uptake into a sampler using both nylon and stainless steel membranes. Utilizing the results of the screening study, a prototype sampler was demonstrated in a laboratory flow box. Over a deployment period of 28 days, concentrations of several perfluoroalkyl carboxylic acids (PFCAs), a perfluoroalkyl sulfonate (PFSA), and a precursor PFAS reached equilibrium with porewater (sampler concentration >90 percent of porewater concentration). Application of these samplers could provide improved understanding of the behavior of PFAS in saturated or partially saturated groundwater systems and allow better assessment of fate and transport in the subsurface. Reliable subsurface site characterization will yield robust site assessments, conceptual models, and improve remediation designs as well as increase confidence in post remedial assessments at PFAS-impacted locations.

Application of Hydrothermal Alkaline Treatment for Destruction of Per- and Polyfluoroalkyl Substances in Contaminated Groundwater and Soil

Hydrothermal alkaline treatment (HALT) can effectively degrade per- and polyfluoroalkyl substances (PFASs) present in aqueous film-forming foam (AFFF). However, information is lacking regarding the treatment of PFASs in actual groundwater and soil from AFFF-impacted sites, especially for complex soil matrices. Given the lack of studies on direct soil treatment for PFAS destruction, we herein applied HALT to two groundwater samples and three soil samples from AFFF-impacted sites and characterized the destruction of PFASs using high-resolution mass spectrometry. Results showed that the 148 PFASs identified in all collected field samples, including 10 cationic, 98 anionic, and 40 zwitterionic PFASs, were mostly degraded to nondetectable levels within 90 min when treated with 5 M NaOH at 350 °C. The near-complete defluorination, as evidenced by fluoride release measurements, confirmed the complete destruction of PFASs. While many structures, including perfluoroalkyl carboxylic acids and polyfluorinated substances, were readily degraded, perfluoroalkyl sulfonates (PFSAs, C_nF_2n+1-SO₃^-), most notably with short chain lengths (n = 3-5), were more recalcitrant. Rates of PFSA destruction in groundwater samples were similar to those measured in laboratory water solutions, but reactions in soil were slow, presumably due to base-neutralizing properties of the soil. Further, the degradation of PFASs in groundwaters and soils was found to be a function of reaction temperature, NaOH concentration, and reaction time. These findings have important implications for the remediation of AFFF-impacted sites.