High-Resolution Exposure Assessment for Volatile Organic Compounds in Two California Residences

A review of phyto- and microbial-remediation of indoor volatile organic compounds

Volatile organic compounds (VOCs) are crucial air pollutants in indoor environments, emitted from building materials, furniture, consumer products, cleaning products, smoking, fuel combustion, cooking, and other sources. VOCs are also emitted from human beings via breath and whole-body skin. Some VOCs cause dermal/ocular irritation as well as gastrointestinal, neurological, cardiovascular, and/or carcinogenic damage to human health. Because people spend most of their time indoors, active control of indoor VOCs has garnered attention. Phytoremediation and microbial remediation, based on plant and microorganism activities, are deemed sustainable, cost-effective, and public-friendly technologies for mitigating indoor VOCs. This study presents the major sources of VOCs in indoor environments and their compositions. Various herbaceous and woody plants used to mitigate indoor VOCs are summarized and their VOCs removal performance is compared. Moreover, this paper reviews the current state of active phytoremediation and microbial remediation for the control of indoor VOCs, and discusses future directions.

Bedroom Concentrations and Emissions of Volatile Organic Compounds during Sleep

Because humans spend about one-third of their time asleep in their bedrooms and are themselves emission sources of volatile organic compounds (VOCs), it is important to specifically characterize the composition of the bedroom air that they experience during sleep. This work uses real-time indoor and outdoor measurements of volatile organic compounds (VOCs) to examine concentration enhancements in bedroom air during sleep and to calculate VOC emission rates associated with sleeping occupants. Gaseous VOCs were measured with proton-transfer reaction time-of-flight mass spectrometry during a multiweek residential monitoring campaign under normal occupancy conditions. Results indicate high emissions of nearly 100 VOCs and other species in the bedroom during sleeping periods as compared to the levels in other rooms of the same residence. Air change rates for the bedroom and, correspondingly, emission rates of sleeping-associated VOCs were determined for two bounding conditions: (1) air exchange between the bedroom and outdoors only and (2) air exchange between the bedroom and other indoor spaces only (as represented by measurements in the kitchen). VOCs from skin oil oxidation and personal care products were present, revealing that many emission pathways can be important occupant-associated emission factors affecting bedroom air composition in addition to direct emissions from building materials and furnishings.

Heterogeneous interactions and transformations of dibasic esters with indoor relevant surfaces

Dibasic esters (DBEs) have recently become emerging indoor air pollutants due to their usage as a solvent for mixtures of paints and coatings. In this study, we explored the adsorption/desorption kinetics, heterogeneous interactions, and chemical transformations of dimethyl succinate (DMS, C6H10O4), a component of commercial dibasic ester solvent mixtures, on indoor relevant surfaces using transmission Fourier-transform infrared (FTIR) spectroscopy and high-resolution mass spectrometry (HRMS). Silica (SiO2) and rutile (TiO2) were used as proxies for window glass, and an active component in paint and self-cleaning surfaces, respectively. FTIR spectroscopy of these surfaces shows that DMS can interact with SiO2 and TiO2 through hydrogen bonding between the carbonyl oxygen and surface hydroxyl groups. The kinetics show fast adsorption of DMS onto these surfaces followed by slow desorption. Furthermore, new products formed observed on TiO2 surfaces in addition to molecularly adsorbed DMS. In particular, succinate (C5H7O) was observed binding to the surface in a bidentate chelating coordination mode as indicated by the appearance of νas(COO-) and νs(COO-) bands in the FTIR spectra. These absorption bands grow in intensity over time and the resulting product remains strongly adsorbed on the surface. The formation of adsorbed succinate is a result of a reaction with DMS on Lewis acid sites of the TiO2 surface. Overall, the slow desorption of these adsorbed species indicates that indoor surfaces can become long term reservoirs for dibasic esters and their surface products. Moreover, in the presence of ∼50% relative humidity, water displaces outer layers of adsorbed DMS on SiO2 and TiO2, while having no impact on the more strongly bound surface species.

Daily Exposure to Environmental Volatile Organic Compounds Triggers Oxidative Damage: Evidence from a Large-Scale Survey in China

Volatile organic compounds (VOCs) are ubiquitous environmental pollutants and have been implicated in adverse health outcomes. In this study, concentrations of 11 VOC metabolites (mVOCs) and three oxidative stress biomarkers (8-oxo-7,8-dihydro-2'-deoxyguanosine, 8-oxo-7,8-dihydro-guanosine, and dityrosine) were determined in 205 urine samples collected from 12 cities across mainland China. Urinary ∑11mVOC concentrations ranged from 498 to 1660 ng/mL, with a geometric mean (GM) value of 1070 ng/mL. The factorial analysis revealed that cooking, solvents, and vehicle emissions were the three primary sources of VOC exposure. A significant regional variation was clearly found in ∑11mVOC concentrations across four regions in China, with high urine VOC concentrations found in North and South China (GM: 1450 and 1340 ng/mL). The multiple linear regression model revealed that most mVOCs were significantly positively correlated with three oxidative stress markers (β range: 0.06-0.22). Mixture effect regression showed that isoprene, crotonaldehyde, acrolein, and benzene were the strongest contributors to oxidative stress. Approximately 80% of the participants have HQ values greater than 1.0 for 1,3-butadiene and benzene, suggesting that their exposure doses were close to potential adverse health effects. Our findings provide comprehensive information on human exposure and potential health risks of VOCs in China.

Source apportionment for indoor air pollution: Current challenges and future directions

Source apportionment (SA) for indoor air pollution is challenging due to the multiplicity and high variability of indoor sources, the complex physical and chemical processes that act as primary sources, sinks and sources of precursors that lead to secondary formation, and the interconnection with the outdoor environment. While the major indoor sources have been recognized, there is still a need for understanding the contribution of indoor versus outdoor-generated pollutants penetrating indoors, and how SA is influenced by the complex processes that occur in indoor environments. This paper reviews our current understanding of SA, through reviewing information on the SA techniques used, the targeted pollutants that have been studied to date, and their source apportionment, along with limitations or knowledge gaps in this research field. The majority (78 %) of SA studies to date focused on PM chemical composition/size distribution, with fewer studies covering organic compounds such as ketones, carbonyls and aldehydes. Regarding the SA method used, the majority of studies have used Positive Matrix Factorization (31 %), Principal Component Analysis (26 %) and Chemical Mass Balance (7 %) receptor models. The indoor PM sources identified to date include building materials and furniture emissions, indoor combustion-related sources, cooking-related sources, resuspension, cleaning and consumer products emissions, secondary-generated pollutants indoors and other products and activity-related emissions. The outdoor environment contribution to the measured pollutant indoors varies considerably (<10 %- 90 %) among the studies. Future challenges for this research area include the need for optimization of indoor air quality monitoring and data selection as well as the incorporation of physical and chemical processes in indoor air into source apportionment methodology.

Proton-transfer rate constants for the determination of organic indoor air pollutants by online mass spectrometry

Proton transfer reaction mass spectrometry (PTR-MS) has become an indispensable analytical tool for indoor related sciences. With high-resolution techniques not only is the online monitoring of the selected ions in the gas phase possible, but also, with some limitations, the identification of substance mixtures without chromatographic separation. The quantification is carried out with the help of kinetic laws, which require knowledge of the conditions in the reaction chamber, the reduced ion moblilities and the reaction rate constant k_PT under these conditions. Ion-dipole collision theory can be used to calculate k_PT. One approach is an extension of Langevin's equation and is known as average dipole orientation (ADO). In a further development, the analytical solution of ADO was replaced by trajectory analysis, which resulted in capture theory. The calculations according to ADO and capture theory require precise knowledge of the dipole moment and the polarizability of the respective target molecule. However, for many relevant indoor related substances, these data are insufficiently known or not known at all. Consequently, the dipole moment μ_D and polarizability α of 114 organic compounds that are frequently found in indoor air had to be determined using advanced quantum mechanical methods. This required the development of an automated workflow that performs conformer analysis before computing μ_D and α using density functional theory (DFT). Then the reaction rate constants with the H₃O⁺ ion are calculated according to the ADO theory (k_ADO), capture theory (k_cap) and advanced capture theory for different conditions in the reaction chamber. The kinetic parameters are evaluated with regard to their plausibility and critically discussed for their applicability in PTR-MS measurements.

Indoor and outdoor air quality impacts of cooking and cleaning emissions from a commercial kitchen

Gas and particulate emissions from commercial kitchens are important contributors to urban air quality. Not only are these emissions important for occupational exposure of kitchen staff, but they can also be vented to outdoors, causing uncertain health and environmental impacts. In this study, we chemically speciated volatile organic compounds and measured particulate matter mass concentrations in a well-ventilated commercial kitchen for two weeks, including during typical cooking and cleaning operations. From cooking, we observed a complex mixture of volatile organic gases dominated by oxygenated compounds commonly associated with the thermal degradation of cooking oils. Gas-phase chemicals existed at concentrations 2-7 orders of magnitude lower than their exposure limits, due to the high ventilation in the room (mean air change rate of 28 h^-1 during operating hours). During evening kitchen cleaning, we observed an increase in the signal of chlorinated gases from 1.1-9.0 times their values during daytime cooking. Particulate matter mass loadings tripled at these times. While exposure to cooking emissions in this indoor environment was reduced effectively by the high ventilation rate, exposure to particulate matter and chlorinated gases was elevated during evening cleaning periods. This emphasizes the need for careful consideration of ventilation rates and methods in commercial kitchen environments during all hours of kitchen operation.

Indoor Volatile Organic Compounds: Concentration Characteristics and Health Risk Analysis on a University Campus

Volatile organic compounds (VOCs) are major indoor air pollutants that contain several toxic substances. However, there are few studies on health risk assessments of indoor VOCs in China. This study aimed to determine the concentration characteristics of VOCs on college campuses by collecting VOC samples from different locations on campus during different seasons combined with the exposure times of college students in each location obtained from a questionnaire survey to assess the possible health risks. The highest total VOC concentration (254 ± 101 µg/m³) was in the dormitory. The seasonal variation of TVOC concentrations was related to the variation of emission sources in addition to temperature. Health risk assessments of VOCs were evaluated using non-carcinogenic and carcinogenic risk values, represented by hazard quotient (HQ) and lifetime cancer risk (LCR), respectively. The non-carcinogenic risks at all sampling sites were within the safe range (HQ < 1). Dormitories had the highest carcinogenic risk, whereas the carcinogenic risk in the other three places was low (with LCR < 1.0 × 10^-6). Moreover, 1,2-dichloroethane was identified as a possible carcinogenic risk substance in the dormitory due to its high LCR (1.95 × 10^-6). This study provides basic data on health risks in different locations on campus and a basis for formulating measures to improve people's living environments.

Acrolein Exposure Impaired Glucose Homeostasis and Increased Risk of Type 2 Diabetes: An Urban Adult Population-Based Cohort Study with Repeated Measures

Acrolein is an identified high-priority hazardous air pollutant ubiquitous in daily life and associated with cardiometabolic risk that attracts worldwide attention. However, the etiology role of acrolein exposure in glucose dyshomeostasis and type 2 diabetes (T2D) is unclear. This repeated-measurement prospective cohort study included 3522 urban adults. Urine/blood samples were repeatedly collected for determinations of acrolein metabolites (N-acetyl-S-(3-hydroxypropyl)-l-cysteine, N-acetyl-S-(2-carboxyethyl)-l-cysteine; acrolein exposure biomarkers), glucose homeostasis, and T2D at baseline and a three-year follow-up. We found that each 3-fold increment in acrolein metabolites was cross-sectionally associated with 5.91-6.52% decrement in homeostasis model assessment-insulin sensitivity (HOMA-IS) and 0.07-0.14 mmol/L, 4.02-4.57, 5.91-6.52, 19-20, 18-19, and 23-31% increments in fasting glucose (FPG), fasting insulin (FPI), HOMA-insulin resistance (HOMA-IR), risks of prevalent IR, impaired fasting glucose (IFG), and T2D, respectively; longitudinally, participants with sustained-high acrolein metabolite levels had increased risks of incident IR, IFG, and T2D by 63-80, 87-99, and 120-154%, respectively (P < 0.05). In addition, biomarkers of heme oxygenase-1 activity (exhaled carbon monoxide), lipid peroxidation (8-iso-prostaglandin-F2α), protein carbonylation (protein carbonyls), and oxidative DNA damage (8-hydroxy-deoxyguanosine) mediated 5.00-38.96% of these associations. Our study revealed that acrolein exposure may impair glucose homeostasis and increase T2D risk via mediating mechanisms of heme oxygenase-1 activation, lipid peroxidation, protein carbonylation, and oxidative DNA damage.

A review of indoor Gaseous organic compounds and human chemical Exposure: Insights from Real-time measurements

Gaseous organic compounds, mainly volatile organic compounds (VOCs), have become a wide concern in various indoor environments where we spend the majority of our daily time. The sources, compositions, variations, and sinks of indoor VOCs are extremely complex, and their potential impacts on human health are less understood. Owing to the deployment of the state-of-the-art real-time mass spectrometry during the last two decades, our understanding of the sources, dynamic changes and chemical transformations of VOCs indoors has been significantly improved. This review aims to summarize the key findings from mass spectrometry measurements in recent indoor studies including residence, classroom, office, sports center, etc. The sources and sinks, compositions and distributions of indoor VOCs, and the factors (e.g., human activities, air exchange rate, temperature and humidity) driving the changes in indoor VOCs are discussed. The physical and chemical processes of gas-particle partitioning and secondary oxidation processes of VOCs, and their impacts on human health are summarized. Finally, the recommendations for future research directions on indoor VOCs measurements and indoor chemistry are proposed.

Volatile Methyl Siloxanes and Other Organosilicon Compounds in Residential Air

Volatile methyl siloxanes (VMS) are ubiquitous in indoor environments due to their use in personal care products. This paper builds on previous work identifying sources of VMS by synthesizing time-resolved proton-transfer reaction time-of-flight mass spectrometer VMS concentration measurements from four multiweek indoor air campaigns to elucidate emission sources and removal processes. Temporal patterns of VMS emissions display both continuous and episodic behavior, with the relative importance varying among species. We find that the cyclic siloxane D5 is consistently the most abundant VMS species, mainly attributable to personal care product use. Two other cyclic siloxanes, D3 and D4, are emitted from oven and personal care product use, with continuous sources also apparent. Two linear siloxanes, L4 and L5, are also emitted from personal care product use, with apparent additional continuous sources. We report measurements for three other organosilicon compounds found in personal care products. The primary air removal pathway of the species examined in this paper is ventilation to the outdoors, which has implications for atmospheric chemistry. The net removal rate is slower for linear siloxanes, which persist for days indoors after episodic release events. This work highlights the diversity in sources of organosilicon species and their persistence indoors.

A review of critical residential buildings parameters and activities when investigating indoor air quality and pollutants

Indoor air in residential dwellings can contain a variety of chemicals, sometimes present at concentrations or in combinations which can have a negative impact on human health. Indoor Air Quality (IAQ) surveys are often required to characterize human exposure or to investigate IAQ concerns and complaints. Such surveys should include sufficient contextual information to elucidate sources, pathways, and the magnitude of exposures. The aim of this review was to investigate and describe the parameters that affect IAQ in residential dwellings: building location, layout, and ventilation, finishing materials, occupant activities, and occupant demography. About 180 peer-reviewed articles, published from 01/2013 to 09/2021 (plus some important earlier publications), were reviewed. The importance of the building parameters largely depends on the study objectives and whether the focus is on a specific pollutant or to assess health risk. When considering classical pollutants such as particulate matter (PM) or volatile organic compounds (VOCs), the building parameters can have a significant impact on IAQ, and detailed information of these parameters needs to be reported in each study. Research gaps and suggestions for the future studies together with recommendation of where measurements should be done are also provided.

Detailed Investigation of the Contribution of Gas-Phase Air Contaminants to Exposure Risk during Indoor Activities

Analytical capabilities in atmospheric chemistry provide new opportunities to investigate indoor air. HOMEChem was a chemically comprehensive indoor field campaign designed to investigate how common activities, such as cooking and cleaning, impacted indoor air in a test home. We combined gas-phase chemical data of all compounds, excluding those with concentrations <1 ppt, with established databases of health effect thresholds to evaluate potential risks associated with gas-phase air contaminants and indoor activities. The chemical composition of indoor air is distinct from outdoor air, with gaseous compounds present at higher levels and greater diversity─and thus greater predicted hazard quotients─indoors than outdoors. Common household activities like cooking and cleaning induce rapid changes in indoor air composition, raising levels of multiple compounds with high risk quotients. The HOMEChem data highlight how strongly human activities influence the air we breathe in the built environment, increasing the health risk associated with exposure to air contaminants.

Cross-sectional and longitudinal associations of acrolein exposure with pulmonary function alteration: Assessing the potential roles of oxidative DNA damage, inflammation, and pulmonary epithelium injury in a general adult population

BACKGROUND

Acrolein is a significant high priority hazardous air pollutant with pulmonary toxicity and the leading cause of most noncancer adverse respiratory effects among air toxics that draws great attention. Whether and how acrolein exposure impacts pulmonary function remain inconclusive.

OBJECTIVES

To assess the association of acrolein exposure with pulmonary function and the underlying roles of oxidative DNA damage, inflammation, and pulmonary epithelium integrity.

METHODS

Among 3,279 Chinese adults from the Wuhan-Zhuhai cohort, associations of urinary acrolein metabolites (N-Acetyl-S-(2-carboxyethyl)-L-cysteine, CEMA; N-Acetyl-S-(3-hydroxypropyl)-L-cysteine, 3HPMA) as credible biomarkers of acrolein exposure with pulmonary function were analyzed by linear mixed models. Joint effects of biomarkers of oxidative DNA damage (8-hydroxy-deoxyguanosine), inflammation (C-reactive protein, CRP), and pulmonary epithelium integrity (Club cell secretory protein, CC16) with acrolein metabolites on pulmonary function and the mediating roles of these biomarkers were assessed. Besides, a subgroup (N = 138) was randomly recruited from the cohort to assess the stabilities of acrolein metabolites and their longitudinal associations with pulmonary function change in three years.

RESULTS

Significant inverse dose-response relationships between acrolein metabolites and pulmonary function were found. Each 10-fold increment in CEMA, 3HPMA, or ΣUACLM (CEMA + 3HPMA) was cross-sectionally related to a 68.56-, 40.98-, or 46.02-ml reduction in FVC and a 61.54-, 43.10-, or 50.14-ml reduction in FEV₁, respectively (P < 0.05). Furthermore, acrolein metabolites with fair to excellent stabilities were found to be longitudinally associated with pulmonary function decline in three years. Joint effects of acrolein metabolites with 8-hydroxy-deoxyguanosine, CRP, and CC16 on pulmonary function were identified. CRP significantly mediated 5.97% and 5.51% of CEMA-associated FVC and FEV₁ reductions, respectively. 8-hydroxy-deoxyguanosine significantly mediated 6.78%, 6.88%, and 7.61% of CEMA-, 3HPMA-, and ΣUACLM-associated FVC reductions, respectively.

CONCLUSIONS

Acrolein exposure of general adults was cross-sectionally and longitudinally related to pulmonary function decline, which was aggravated and/or partly mediated by oxidative DNA damage, inflammation, and pulmonary epithelium injury.

Substitution of B-site in BaSb2O6 perovskite for surface lattice oxygen activation and boosted photocatalytic toluene mineralization

Perovskite oxides possess significant prospects in environment application because of their compositional versatility and controllable band structure for redox reactions. Nevertheless, low charge separation and limited reactants activation restrict their performance for practical applications. In this work, we reveal that the electronic structure of BaSb₂O₆ can be modulated effectively by substituting B-site cations, leading to broadened light response range and promoted carrier separation. The Ga atoms substitute the Sb atoms to form GaO bonds and enable octahedral distortion, resulting in the electron transfer from Ga atom to O atoms and realizing lattice oxygen activation. The unique electronic localization in the BaSb₂O₆ surface facilitates the adsorption and activation of O₂, H₂O, toluene and reaction intermediates, thus enhancing ROS generation for toluene mineralization. Compared with the performance of pure BaSb₂O₆, the photocatalytic toluene degradation and mineralization of 5 wt% Ga-BaSb₂O₆ are increased by 4.5 times and 4.8 times without obvious deactivation. The reported facile and valid strategy for in situ controlling of B-site in perovskite and their unique effects on the electronic structure would benefit the development of high-performance perovskites for environmental applications.

Per-Person and Whole-Building VOC Emission Factors in an Occupied School with Gas-Phase Air Cleaning

Using real-time measurements of CO₂ and volatile organic compounds (VOCs) in the air handler of an occupied middle school, we quantified source strengths for 249 VOCs and apportioned the source to the building, occupants and their activities, outdoor air, or recirculation air. For VOCs quantified in this study, there is a source to the outdoors of 8.6 ± 1.8 g/h in building exhaust air, of which 5.9 ± 1.7 g/h can be attributed to indoor sources (the building and occupants and their activities). The corresponding whole-building area emission factor from indoor sources is 1020 ± 300 μg/(m² h), including reactive VOCs like isoprene and monoterpenes (33 ± 5.1 and 29 ± 5.7 μg/(m² h), respectively). Per-person emission factors are calculated for compounds associated with occupants and their activities, e.g., monoterpenes are emitted at a rate of 280 ± 80 μg/(person h). The air handler included carbon scrubbing, reducing supply air concentrations of 125 compounds by 38 ± 19% (mean ± std. dev.) with a net removal of 2.4 ± 0.4 g/h of organic compounds from the building. This carbon scrubber reduces steady-state indoor concentrations of organics by 65 μg/m³ and the contribution of indoor sources of VOCs to the outdoor environment by ∼40%. These data inform the design and operation of buildings to reduce human exposure to VOCs inside buildings. These data indicate the potential for gas-phase air cleaning to improve both indoor air quality and reduce VOC emissions from buildings to the outdoor environment.

Enhanced catalytic performance of spinel-type Cu-Mn oxides for benzene oxidation under microwave irradiation

Microwave-assisted heterogeneous catalytic oxidation of benzene was investigated over Cu-Mn spinel oxides. The spinel oxides were synthesized by a coprecipitation method from metal nitrate hydrolysis in a solution using tetramethylammonium hydroxide (TMAH) as a precipitation reagent. The catalysts were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, X-ray absorption fine structure, scanning electron microscopy, transmission electron microscope and H₂-temperature-programmed reduction studies. Microwave absorption by the Cu-Mn spinel oxide is mainly driven by dielectric losses (dielectric heating). Cu-Mn spinel oxide with a Cu/Mn ratio of 1 exhibited superior activity to single oxides under microwave heating, demonstrating lower apparent activation energy than that obtained under conventional heating. Microwave irradiation lowered the reaction temperature required for benzene oxidation compared with conventional heating. Transient tests were used to investigate the reactivity of oxygen species in the catalytic reaction, and the high reactivity of Cu-Mn spinel oxides was related to the high reactivity of lattice oxygen on the catalyst surface. The reactivity of the oxygen species was enhanced under microwave heating, leading to an enhanced benzene oxidation reaction. The combination of adsorption and catalytic oxidation processes using Cu-Mn spinel oxides and zeolites efficiently decomposed benzene at low concentrations.

Modelling botanical biofiltration of indoor air streams contaminated by volatile organic compounds

Botanical filtration is a biological-based treatment method suitable for removing hazardous volatile organic compounds (VOCs) from air streams, based on forcing an air flow through a porous substrate and foliage of a living botanical compartment. The pathways and removal mechanisms during VOC bioremediation have been largely investigated; however, their mathematical representation is well established only for the non-botanical components of the system. In this study, we evaluated the applicability of such a modelling scheme to systems which include a botanical compartment. We implemented a one-dimensional numerical model and performed a global sensitivity analysis to measure the input parameters influence on the transient and steady biofilter responses. We found that the most sensitive parameters on the transient-state behaviour were the mass transfer coefficient between gas and solid surfaces, and the fraction of solid surfaces covered by the biofilm; the steady-state response was primarily influenced by the biofilm specific surface area and the fraction of surfaces covered by the biofilm. We calibrated the identified set of parameters and successfully validated the model against data from a pilot-scale installation. The results showed that the application of the model to systems with a botanical compartment is feasible, although under a strict set of assumptions.

Determination of acrolein in ambient air and in the atmosphere of environmental test chambers

Acrolein (2-propenal) is a reactive substance undergoing multiple reaction pathways and an airborne pollutant with known corrosive, toxic and hazardous effects to the environment and to human health. So far, investigating the occurrence of acrolein in indoor air has been challenging due to analytical limitations. The classic DNPH-method has proven to be error-prone, even though it is still recommended in specific testing protocols. Thus, different approaches for an accurate determination of ambient acrolein have been introduced. In this work, an overview of already published data regarding emission sources and air concentrations is provided. In addition, a new method for the quantitative determination of acrolein in environmental test chambers and in indoor air is presented. Analysis is carried out using thermal desorption and coupled gas chromatography/mass spectrometry (TD-GC/MS) after sampling on the graphitized carbon black (GCB) Carbograph™ 5TD. All analytical steps have been carefully validated and compared with derivatization techniques (DNPH and DNSH) as well as online detection using PTR-QMS. The sampling time is short due to the low air collection volume of 4 L. Although derivatization is not applied, a detection limit of 0.1 μg m^-3 can be achieved. By increasing the sampling volume to 6 L, the limit of detection can be lowered to 0.08 μg m^-3. No breakthrough during sampling or analyte loss during storage of the acrolein laden sampling tubes was found. Therefore, the presented method is robust, easy-to-handle and also very suitable for routine analyses and surveys.

Toward Clean Residential Energy: Challenges and Priorities in Research

Solid fuels used for cooking, heating, and lighting are major emission sources of many air pollutants, specifically PM_2.5 and black carbon, resulting in adverse environmental and health impacts. At the same time, the transition from using residential solid fuels toward using cleaner energy sources can result in significant health benefits. Here, we briefly review recent research progress on the emissions of air pollutants from the residential sector and the impacts of emissions on ambient and indoor air quality, population exposure, and health consequences. The major challenges and future research priorities are identified and discussed.