Near-Quantitative Defluorination of Perfluorinated and Fluorotelomer Carboxylates and Sulfonates with Integrated Oxidation and Reduction

Deep Insight of the Mechanism for Nitrate-Promoted PFASs Defluorination in UV/Sulfite ARP: Activation of the Decarboxylation-Hydroxylation-Elimination-Hydrolysis Degradation Pathway

The UV/sulfite advanced reduction process (ARP) holds promise for the removal of per- and polyfluoroalkyl substances (PFASs) by a hydrated electron (eaq-)-induced H/F exchange process under anoxic conditions. Traditionally, the presence of coexisting nitrate in water has always been regarded as a major inhibitory factor for PFASs defluorination. However, this study observed an unexpected promotive effect of nitrate on defluorination, challenging the previous phenomenon. Notably, the addition of 100 μM nitrate resulted in a remarkable 54% enhancement in PFOA defluorination. A novel mechanism was discovered that nitrate-derived reactive nitrogen species (RNS) activated the decarboxylation-hydroxylation-elimination-hydrolysis (DHEH) process, an important degradation pathway for PFASs in UV/sulfite ARP. Induced by eaq-, the PFAS molecule first became a perfluorinated radical and then was transformed into unstable perfluorinated alcohol by reacting with water. Due to the high reactivity driven by unpaired electrons of RNS, water molecules were destabilized with the H-O bond stretched from 0.98 to 1.04 Å. This effectively enhanced the spontaneity of the reaction between perfluorinated radical and water molecules and consequently made the whole DHEH process more thermodynamic favorable (ΔG, -23.53 → -376.28 kJ/mol). Such a process breaks through the view that the nitrate directly reacts with eaq- to affect PFASs defluorination in ARP systems. This finding offers an innovative perspective for optimizing PFAS defluorination by strategically regulating nitrate levels in water bodies.

Plasma-Generated Free Electrons Induced Perfluorooctanoic Acid Efficient Degradation at the Gas-Liquid Interface

Low-temperature plasma, generating both reductive electrons and diverse oxidative species, has demonstrated considerable potential for the degradation of perfluorooctanoic acid (PFOA). However, limited understanding of electron propagation mechanisms during discharge has led previous research to focus on hydrated electrons (eaq-) while neglecting free electrons (e-). In this study, a consistent and modeled dielectric barrier discharge (DBD) plasma was employed to degrade PFOA. Contribution analysis indicated that reactions driven by e- were dominant, with substantial contributions from hydroxyl radical (•OH)-mediated oxidation. By integrating a kinetic model with a streamer solver, a basic discharge unit model was developed. Simulation of e- streamer propagation identified a high-intensity response electric field formed by the e- memory effect, with a peak strength of 1.816 × 106 V/m. This electric field facilitated a secondary acceleration of e-, allowing e- to penetrate the surface water layer and directly attack PFOA via chain-shortening mechanisms. The delocalized state of e- restricted degradation primarily to the gas-liquid interface, minimizing interference from the surrounding medium. This study highlights the previously overlooked role of e- and provides essential theoretical insights for the plasma-based treatment of PFOA-contaminated water.

Degradation and defluorination of C6F13 PFASs with different functional groups by VUV/UV-based reduction and oxidation processes

Structural diversity can affect the degradability of per- and polyfluoroalkyl substances (PFASs) during water treatment. Here, three PFASs with different functional groups-C6F13-R, PFHpA, PFHxS, and 6:2 FTS-were degraded using vacuum ultraviolet (VUV/UV)-based treatments. While fully fluorinated PFASs-PFHpA and PFHxS-were degraded faster in the VUV/UV/sulfite reaction than in VUV/UV photolysis, VUV/UV photolysis was more effective for degrading 6:2 FTS by OH radicals produced through photolysis of water. PFCAs such as PFHxA, PFPeA, and PFBA were formed by VUV/UV photolysis of PFHpA and 6:2 FTS, but the PFCA formation was inhibited in the VUV/UV/sulfite reaction. The degradation of the three PFASs in the VUV/UV/sulfite reaction was mainly carried out by H/F and SO3•-/F exchange mechanisms, mediated by hydrated electrons (eaq-) produced in the reaction. During the VUV/UV/sulfite reaction, PFCA precursors were first formed as transformation products, which were further transformed into PFCAs by the following VUV/UV/H2O2 reaction, implying enhanced defluorination of three PFASs. Our results indicate that VUV/UV-based treatments can be an option for PFAS degradation and defluorination by combining advanced reduction and oxidation processes and utilizing both eaq- and oxidative radicals.

Accurate detection and high throughput profiling of unknown PFAS transformation products for elucidating degradation pathways

The accurate detection of unknown per- and polyfluoroalkyl substances (PFAS) transformation products (TPs) is essential for elucidating degradation pathways and advancing remediation strategies. Herein, we developed a workflow that combined Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) with a paired mass distance (PMD) network. This study achieved high throughput profiling of PFAS TPs with mDa resolving power and sub-ppm mass error. UV treatment revealed chain-shortening pathways, while plasma treatment uncovered competing mechanisms of chain shortening and lengthening, generating oxygen-rich TPs with increased hydrophilicity. Specifically, UV treatment of a 15-PFAS mixture and contaminated natural water showed disappearance of 7 unknown PFAS homologues and the emergence of 12 unknown PFAS homologues. Despite PFAS persistence under UV exposure, previously undetected low-abundance PFAS species were identified, indicating non-negligible photochemical transformation. Under plasma treatment of isolated PFOS, 39 unknown PFAS homologues including 142 suspect and 34 unknown PFAS TPs were identified, highlighting the extensive transformation of emerging and persistent PFAS. Overall, our approach enabled accurate and high-throughput profiling of unknown PFAS TPs and their degradation pathways, providing new insights into persistent unknown PFAS.

New Insights into the Reductive Destruction of Per- and Polyfluoroalkyl Substances in Hydrated Electron-Based Systems

Per- and polyfluoroalkyl substances (PFAS) make up a class of highly toxic and persistent chemicals that have been widely detected in different environmental matrices. Recently, various hydrated electron-based techniques have been developed to destroy these compounds. However, the molecular mechanisms controlled by different hydrated electron photosensitizers are still unclear. Herein, we investigated the PFAS transformation processes in different hydrated electron-based systems, i.e., UV/Na2SO3, UV/indole, and UV/3-indoleacetic acid (IAA), using different perfluorocarboxylic acids (PFCA) as model compounds. By monitoring the production and decay of hydrated electrons, molecular interactions, and the generated intermediates, we systematically revealed the structure-property-performance mechanism of different systems. In the UV/Na2SO3 system, the disordered attack of hydrated electrons induced rapid destruction for either long or short-chain PFCA. However, the lower hydrated electron efficiency limited the final defluorination ratio. In the UV/indole system, the interaction between indole and PFCA promoted the directed transfer of hydrated electrons, resulting in a significantly higher destruction efficiency for long-chain PFCA than for short-chain PFCA. However, the self-quenching of hydrated electrons in the UV/IAA system led to the ineffective decomposition for all PFCA. This study provides mechanistic insights into the hydrated electron-induced PFAS decomposition processes, which would expand the designing strategies for improving PFAS destruction efficiency.

Cyclic removal and destruction of per- and polyfluoroalkyl substances from water using ion exchange, resin regeneration, and UV/sulfite reduction

Ion exchange (IX) can effectively remove per- and poly-fluoroalkyl substances (PFAS) from drinking water sources at ng/L to µg/L levels. However, adsorbed PFAS on spent resins should be further destructed for detoxification. Traditional resin incineration or landfilling may cause secondary pollution to the surrounding environment and cannot achieve resin reuse. This study explored three variations of a PFAS treatment train, aiming to completely defluorinate PFAS with different chain lengths and functional groups at environmentally relevant levels (ng/L) and to reuse the resins and solvents. The optimized treatment train includes IX, resin regeneration with 5 wt% NaCl and 60 % v/v methanol, distillation of waste regenerant, and advanced reduction by hydrated electrons (eaq-) generated during the ultraviolet/sulfite (UV/sulfite) treatment of still bottoms. Such a treatment train achieved nearly 100 % PFAS removal from surface water and groundwater using either PFAS-specific or generic resins, and almost 100 % defluorination of PFAS except a few short-chain fluorinated sulfonates and ethers. Regenerated resins had comparable PFAS removal to the pristine resins over three cycles. The generic resins (e.g., Dupont AmberLite™ IRA910) are easier to regenerate and thus are recommended for the treatment train over PFAS-selective resins (e.g., Purofine® PFA694E). Direct heterogenous defluorination on resins loaded with perfluorooctane sulfonate (PFOS) was ineffective, potentially due to the consumption of UV light/eaq- by the resins and insufficient contact between the UV light/eaq- with PFOS on the resin surface. Distillation of the waste regenerant successfully concentrated PFAS in the still bottoms, reduced the waste volume, and removed excess methanol, all essential for effective UV/sulfite treatment. Meanwhile, the produced condensate with high methanol contents and low PFAS levels can be reused for the next regeneration cycle. Findings from this study provide a timely and sustainable solution to the stringent and evolving regulations on PFAS and the resultant production of PFAS-laden resins as hazardous wastes.

Durable Ti4O7 Heterojunction Composite Membrane Encapsulating N-Doped Graphene Nanosheets for Efficient Electro-Oxidation of GenX and Other PFAS in Fluorochemical Wastewater

Rational interfacial engineering design of an electrocatalyst, such as a heterojunction structure, can effectively enhance its catalytic activity. This study aims to address a critical challenge associated with the use of carbon material@Ti4O7 heterojunction composite electrodes for wastewater treatment─electrode stability over long-term operation. Herein, we report a highly stabilized interfacial engineering strategy, i.e., the use of conductive inorganic CeO2 as a "cement" to firmly encapsulate N-doped graphene oxide nanosheets (N-GS) on the Ti4O7 surface. The defect-rich N-GS encapsulated on the Ti4O7 surface significantly enhances interfacial charge transfer. This enhancement results in the N-GS/CeO2@Ti4O7 heterojunction composite electrode exhibiting excellent efficiency in the electro-oxidation of hexafluoropropylene oxide dimer acid (HFPO-DA or GenX). Furthermore, a flow-through N-GS/CeO2@Ti4O7 reactive electrochemical membrane system effectively mineralizes other 35 PFASs in a real fluorochemical wastewater sample, achieving a high defluorination rate of 70-90% and exhibiting better performance in PFAS destruction and energy efficiency compared to the UV/KI-SO32- process. Results of this study enhance our understanding of the electrochemical oxidation of PFAS and offer valuable insight into the design of stabilized Ti4O7 heterojunction composites. These findings are instrumental in advancing the development of effective treatments for PFAS-contaminated environments.

Pyrolysis of Two Perfluoroalkanesulfonates (PFSAs) and PFSA-Laden Granular Activated Carbon (GAC): Decomposition Mechanisms and the Role of GAC

Thermal treatment of perfluoroalkyl and polyfluoroalkyl substances (PFASs) presents a promising opportunity to halt the PFAS cycle. However, how co-occurring materials such as granular activated carbon (GAC) influence thermal decomposition products of PFASs, and underlying mechanisms remain unclear. We studied the pyrolysis of two potassium salts of perfluoroalkanesulfonates (PFSAs, CnF2n+1SO3K), perfluorobutanesulfonate (PFBS-K), and perfluorooctanesulfonate (PFOS-K), with or without GAC. PFBS-K is more stable than PFOS-K for pure standards, but when it is adsorbed onto GAC, its thermal stabilities and decomposition behaviors are similar. Temperatures and heating rates can significantly influence the decomposition mechanisms and products for pure standards, while these effects are less pronounced when PFSAs are adsorbed onto GAC. We further studied the underlying decomposition mechanisms. Pure standards of CnF2n+1SO3K can decompose directly in their condense phase by reactions: F(CF2)nSO3K → F(CF2)n-2CF═CF2 + KFSO3 or F(CF2)nSO3K → F(CF2)n- + K+ + SO3. GAC appears to facilitate breakage of the C-S bond to release SO2 at temperatures as low as 280 °C. GAC promotes fluorine mineralization through functional reactive sites. SiO2 is particularly important for the surface-mediated mineralization of PFASs into SiF4. These findings offer valuable insights into optimizing thermal treatment strategies for PFAS-contaminated waste.

Enhanced selective photocatalytic reduction and oxidation of perfluorooctanoic acid on Bi/Bi5O7I decorated with poly (triazine imide)

Perfluorooctanoic acid (PFOA) is detected widely in surface and groundwater globally. Its removal poses a significant challenge due to its high chemical stability. This study demonstrates efficient PFOA degradation using poly-triazine-imides-tailored defective Bi5O7I (PTI/BB). Under 300 W Xe irradiation, 1 µg·L-1 PFOA could be degraded to 9.86 ng·L-1 after 3 h in the presence of 0.5 g·L-1 25 % PTI/BB. The mechanism investigation reveals that the oxygen vacancy (OV) in partially reduced Bi/Bi5O7I (BB) generates impurity states, enhancing the light-harvesting capacity. Furthermore, forming a type Ⅱ heterojunction between conjugated PTI and BB facilitates the efficient separation of photogenerated carriers. The resulting photogenerated electrons (reduction) and holes (oxidation) drive hydrogenation reduction and oxidative decarboxylation of PFOA, respectively. This synergistic effect consequently achieves significant defluorination of PFOA. The proposed PFOA degradation pathway via the PTI/BB catalyst offers new insights into the catalyst design for photocatalytic degradation of per- and polyfluoroalkyl substances (PFAS).

Photo-reductive decomposition of perfluorooctane sulfonate (PFOS) and its common alternatives by UV/VUV/sulfite process: Mechanism, kinetic modeling, and water matrix effects

The present study investigated the photo-reduction of perfluorooctane sulfonate (PFOS) and its alternatives, focusing on decomposition mechanisms, active species involvement, the influence of background water constituents, and kinetic model development. The decomposition and defluorination rates followed the order of PFOS > PFHxS > 6:2 FTSA > PFBS, with shorter chains and CH2 linkers enhancing the resistance of PFOS alternatives against the attack of hydrated electrons (eaq-). Two primary pathways were identified during the photodegradation of PFAS: (i) H/F exchange at CF bonds with the lowest bond dissociation energies (BDEs) and (ii) functional group cleavage followed by short-chain PFCAs formation, with OH playing a crucial role in transforming intermediates. Adding iodide and elevated temperatures demonstrated a synergistic effect on PFBS decomposition and defluorination, with high temperatures promoting functional group cleavage as the preferred defluorination pathway. The study examined the impact of background water constituents in different aqueous environments, from surface waters to wastewater streams and ion-exchange brine concentrates. Chloride exhibited a concentration-based dual impact on the UV/VUV/sulfite process: promotive effects at low dosages (1-10 mM) by acting as a secondary eaq- mediator, and adverse effects at high dosages (20-500 mM) due to the scavenging effect of generated chlorine radicals (Cl). High ionic strength adversely affected eaq- quantum efficiency. Additionally, bicarbonate and natural organic matter (NOM) had opposing effects on PFOS photo-reduction, primarily through eaq- scavenging and pH alteration. Kinetic modeling revealed reaction rate constants of the studied PFAS with eaq- ranging from 1.8 × 106 to 1.3 × 109 M-1 s-1, corroborating the concentration profiles of active species and highlighting the reductive nature of sulfite-mediated processes.

Destruction of Per- and Polyfluoroalkyl Substances in Reverse Osmosis Concentrate Using UV-Advanced Reduction Processes

UV-advanced reduction processes (UV-ARP), characterized by the strongly reducing aqueous electron (eaq -), have been shown to degrade perfluoroalkyl and polyfluoroalkyl substances (PFAS). Due to the high cost of PFAS destruction technologies, concentrated waste streams derived from physical treatment processes, such as ion exchange or membrane concentrates, are promising targets for implementation of these technologies. However, there are limited studies on the application of UV-ARP for PFAS destruction in concentrated waste streams. This study evaluates the effectiveness of the UV/sulfite ARP in reverse osmosis concentrate (ROC) containing high concentrations of dissolved organic carbon (DOC), nitrate, and carbonate species, spiked with mg/L concentrations of perfluorooctanesulfonic acid, perfluorobutanesulfonic acid, perfluorooctanoic acid, and perfluorobutanoic acid. We demonstrate that hardness removal and preoxidation of ROC with UV/persulfate enables >90% PFAS defluorination within 24 h of subsequent UV/sulfite treatment, a 3-fold enhancement in defluorination % compared to UV/sulfite treatment without preoxidation. This enhancement is shown to result from abatement of the light shielding and eaq - scavenging capacity of DOC during UV/persulfate oxidation. Collectively, these results demonstrate that appropriate pretreatment steps increase the effectiveness of PFAS destruction using UV-ARP, supporting the application of UV-ARP for PFAS destruction in ROC and other concentrated waste streams.

Synergistic adsorption and UV degradation of perfluorooctanoic acid by amine-functionalized A-center sphalerite

Perfluorinated alkylated substances (PFAS), as a category of persistent organic pollutants, have garnered extensive concern due to their resilience against environmental degradation. Herein, we developed an amine-functionalized sphalerite (ZnS) with adjustable surface amine functional groups and Zn defects (ZnS-X%[N]) by in situ coprecipitation and simple hydrothermal method in the presence of cetyltrimethylammonium bromide (CTAB). This material demonstrated efficient PFAS adsorption and subsequent photo-induced degradation under UV irradiation. The characterization results by TEM, BET, FTIR, XPS and EPR revealed that CTAB primarily influences ZnS by modulating surface amine functionalities, zinc defect density, and enhancing its photoreductive capacity. Adsorption and kinetic degradation experiments further showed that a medium CTAB concentration in ZnS-40%[N] achieves highest PFAS adsorption capacity (Cmax: 0.201 mol kg-1), and the corresponding decomposition rate was the fastest (kde: 1.53; kdf: 1.19). This efficacy is attributed to the ZnS-40%[N]'s ideal adsorptive sites and surface shallow defects. Moreover, theoretical simulation also supports the above experimental inference. Overall, ZnS-X%[N] exhibits a synergistic effect on PFAS adsorption and degradation, showcasing its potential for environmental adaptability and practical application.

Per- and polyfluoroalkyl substances contamination of drinking water sources in Africa: Pollution sources and possible treatment methods

Despite the detection of poly- and perfluorinated alkyl substances (PFAS) in the water system in Africa, the effort towards mitigating PFAS in water in Africa needs to be better understood. Therefore, this review evaluated the contamination status and mitigation methods for handling PFAS-contaminated water systems in Africa. The findings revealed the presence of PFAS in wastewater treatment plant (WWTP) effluents, surface water and commercially available bottled and tap water in African countries. The concentration of PFAS in drinking water sources reviewed ranged from < limits of quantification to 778 ng L-1. The sources of PFAS in water systems in Africa are linked to uncontrolled importation of PFAS-containing products, WWTP effluents and inappropriate disposal of PFAS-containing materials. The information on treatment methods for PFAS-contaminated water systems is scanty. Unfortunately, the treatment method is challenged by poor water research infrastructure and facilities, lack of awareness, poor research funding and weak legislation; however, adsorption and membrane technology seem favourable for removing PFAS from water systems in Africa. It is essential to focus on monitoring and assessing drinking water quality in Africa to reduce the disease burden that this may cause. Most African countries' currently implemented water treatment facilities cannot efficiently remove PFAS during treatment. Therefore, governments in Africa need to fund more research to develop an efficient water treatment technique that is sustainable in Africa.

Co-Removal of Perfluorooctanoic Acid and Nitrate from Water by Coupling Pd Catalysis with Enzymatic Biotransformation

PFAS (poly- and per-fluorinated alkyl substances) represent a large family of recalcitrant organic compounds that are widely used and pose serious threats to human and ecosystem health. Here, palladium (Pd0)-catalyzed defluorination and microbiological mineralization were combined in a denitrifying H2-based membrane biofilm reactor to remove co-occurring perfluorooctanoic acid (PFOA) and nitrate. The combined process, i.e., Pd-biofilm, enabled continuous removal of ∼4 mmol/L nitrate and ∼1 mg/L PFOA, with 81% defluorination of PFOA. Metagenome analysis identified bacteria likely responsible for biodegradation of partially defluorinated PFOA: Dechloromonas sp. CZR5, Kaistella koreensis, Ochrobacterum anthropic, and Azospira sp. I13. High-performance liquid chromatography-quadrupole time-of-flight mass spectrometry and metagenome analyses revealed that the presence of nitrate promoted microbiological oxidation of partially defluorinated PFOA. Taken together, the results point to PFOA-oxidation pathways that began with PFOA adsorption to Pd0, which enabled catalytic generation of partially or fully defluorinated fatty acids and stepwise oxidation and defluorination by the bacteria. This study documents how combining catalysis and microbiological transformation enables the simultaneous removal of PFOA and nitrate.

Development of a method using QuEChERS and LC-MS/MS for analysis of per- and polyfluoroalkyl substances in rice matrix

Detection of per- and polyfluoroalkyl substances (PFAS) in food is crucial for ensuring food safety. Therefore, we combined a quick, easy, cheap, rugged, and safe (QuEChERS) extraction method with liquid chromatography-triple-quadrupole mass spectrometry (LC-MS/MS) to detect 35 PFAS in rice. The solvents (water and acetonitrile) were adjusted to pH 2.4, a mixture of anhydrous MgSO4, NaCl, and NaOAc was used for extraction, and anhydrous MgSO4, a primary/secondary amine, and graphitized carbon black were applied for purification. The limits of detection and recovery were 0.005-0.100 ng·g-1 and 86.5 %-126.4 %, respectively. When this method was used to detect PFAS in packaged instant rice cooked in a microwave or boiled in water, the microwaved sample showed a lower PFAS content. However, both samples had PFAS contents within WHO guidelines and were safe for consumption. This method can be extended to detect PFAS levels in other foods exposed to packaging materials containing PFAS.

Kinetics and mechanism analysis of advanced oxidation degradation of PFOA/PFOS by UV/Fe3+ and persulfate: A DFT study

UV/Fe3+ and persulfate are two promising advanced oxidative degradation systems for in situ remediation of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), yet a lack of comprehensive understanding of the degradation mechanisms. For the first time, we used density functional theory (DFT) to calculate the entire reaction pathways of the degradation of PFOA/PFOS in water by UV/Fe3+ and persulfate. In addition, we have deeply explored the different attack pathways driven by •OH and SO4-•, and found that SO4-• determines PFOA/PFOS to obtain PFOA/PFOS free radicals through single electron transfer to initiate the degradation reaction, while •OH determines the speed of PFOA/PFOS degradation reaction. Both degradation reactions were thermodynamically advantageous and kinetically feasible under calculated conditions. Based on the thermodynamic data, persulfate was found to be more favorable for the advanced oxidative degradation of Perfluorinated compounds (PFCs). Moreover, for SO4-• and •OH co-existing in the persulfate system, pH will affect the presence and concentration of these two types of free radicals, and low pH is not necessary for the degradation of PFOA/PFOS in the persulfate system. These results can considerably advance our understanding of the PFOA/PFOS degradation process in advanced oxidation processes (AOPs), which is driven by •OH and SO4-•. This study provides a DFT calculation process for the mechanism calculation of advanced oxidation degradation of other types of PFCs pollutants, hoping to elucidate the future development of PFCs removal. Further research should focus on determining the advanced oxidation degradation pathways of other types of PFCs, to support the development of computational studies on the advanced oxidation degradation of PFCs.

Overlooked Activation Role of Sulfite in Accelerating Hydrated Electron Treatment of Perfluorosulfonates

Photoexcitation of sulfite (SO32-) is often used to generate hydrated electrons (eaq-) in processes to degrade perfluoroalkyl and polyfluoroalkyl substances (PFASs). Conventional consensus discourages the utilization of SO32- concentrations exceeding 10 mM for effective defluorination. This has hindered our understanding of SO32- chemistry beyond its electron photogeneration properties. In contrast, the radiation-chemical study presented here, directly producing eaq- through water radiolysis, suggests that SO32- plays a previously overlooked activation role in the defluorination. Quantitative 60Co gamma irradiation experiments indicate that the increased SO32- concentration from 0.1 to 1 M enhances the defluorination rate by a remarkable 15-fold, especially for short-chain perfluoroalkyl sulfonate (PFSA). Furthermore, during the treatment of long-chain PFSA (C8F17-SO3-) with a higher concentration of SO32-, the intermediates of C8H17-SO3- and C3F7-COO- were observed, which are absent without SO32-. These observations highlight that a higher concentration of SO32- facilitates both reaction pathways: chain shortening and H/F exchange. Pulse radiolysis measurements show that elevated SO32- concentrations accelerate the bimolecular reaction between eaq- and PFSA by 2 orders of magnitude. 19F NMR measurements and theoretical simulations reveal the noncovalent interactions between SO32- and F atoms, which exceptionally reduce the C-F bond dissociation energy by nearly 40%. As a result, our study offers a more effective strategy for degrading highly persistent PFSA contaminants.

Applying the modified UV-activated TOP assay to complex matrices impacted by aqueous film-forming foams

Per- and polyfluoroalkyl substances (PFAS) are a large chemical family, and numerous chemical species can co-exist in environmental samples, especially those impacted by aqueous film-forming foams (AFFFs). Given the limited availability of chemical standards, capturing the total amount of PFAS is challenging. Thus, the total oxidizable precursor (TOP) assay has been developed to estimate the total amount of PFAS via the oxidative conversion of precursors into perfluorocarboxylic acids (PFCAs). This study aims to enhance the robustness of the TOP assay by replacing heat activation with UV activation. We evaluated the molar yields of known precursors in water in the presence of varying levels of Suwannee River natural organic matter (SRNOM) and in two soils. The impact of UV activation was also evaluated in two soils spiked with three well-characterized AFFFs, six AFFF-impacted field soils, and nine rinse samples of AFFF-impacted stainless-steel pipe. In the presence of 100 mg/L SNROM, 6:2 fluorotelomer sulfonate (FTS), 8:2 FTS, and N-ethyl perfluorooctane sulfonamidoacetic acid (N-EtFOSAA) in deionized water had good molar recovery as PFCAs (average of 102 ± 9.8 %); at 500 mg/L SNROM, the recovery significantly dropped to an average of 51 ± 19 %. In two soils (with 4 % and 8.8 % organic matter) with individual precursor spikes, the average molar recovery was 101 ± 9.4 %, except N-EtFOSAA, which had a reduced recovery in the soil with 8.8 % organic matter (OM). UV-activated assays outperformed heat-activated ones, especially in AFFF-impacted soils and pipe extract samples, with an average of 1.4-1.5× higher PFCA recovery. In almost all test samples, UV activation resulted in a notable shift towards longer PFCA chain lengths, particularly for samples with high OM content. The study confirmed the advantages of UV activation, including a significantly shortened exposure time (1 h vs. 6 h) and reduced matrix effects from OM due to the dual functions of UV in activating persulfate and photodegrading OM.

Electrostatic Field in Contact-Electro-Catalysis Driven C-F Bond Cleavage of Perfluoroalkyl Substances

Perfluoroalkyl substances (PFASs) are persistent and toxic to human health. It is demanding for high-efficient and green technologies to remove PFASs from water. In this study, a novel PFAS treatment technology was developed, utilizing polytetrafluoroethylene (PTFE) particles (1-5 μm) as the catalyst and a low frequency ultrasound (US, 40 kHz, 0.3 W/cm2) for activation. Remarkably, this system can induce near-complete defluorination for different structured PFASs. The underlying mechanism relies on contact electrification between PTFE and water, which induces cumulative electrons on PTFE surface, and creates a high surface voltage (tens of volts). Such high surface voltage can generate abundant reactive oxygen species (ROS, i.e., O2⋅-, HO⋅, etc.) and a strong interfacial electrostatic field (IEF of 109~1010 V/m). Consequently, the strong IEF significantly activates PFAS molecules and reduces the energy barrier of O2⋅- nucleophilic reaction. Simultaneously, the co-existence of surface electrons (PTFE*(e-)) and HO⋅ enables synergetic reduction and oxidation of PFAS and its intermediates, leading to enhanced and thorough defluorination. The US/PTFE method shows compelling advantages of low energy consumption, zero chemical input, and few harmful intermediates. It offers a new and promising solution for effectively treating the PFAS-contaminated drinking water.

Oxidative Transformation of Nafion-Related Fluorinated Ether Sulfonates: Comparison with Legacy PFAS Structures and Opportunities of Acidic Persulfate Digestion for PFAS Precursor Analysis

The total oxidizable precursor (TOP) assay has been extensively used for detecting PFAS pollutants that do not have analytical standards. It uses hydroxyl radicals (HO•) from the heat activation of persulfate under alkaline pH to convert H-containing precursors to perfluoroalkyl carboxylates (PFCAs) for target analysis. However, the current TOP assay oxidation method does not apply to emerging PFAS because (i) many structures do not contain C-H bonds for HO• attack and (ii) the transformation products are not necessarily PFCAs. In this study, we explored the use of classic acidic persulfate digestion, which generates sulfate radicals (SO4-•), to extend the capability of the TOP assay. We examined the oxidation of Nafion-related ether sulfonates that contain C-H or -COO-, characterized the oxidation products, and quantified the F atom balance. The SO4-• oxidation greatly expanded the scope of oxidizable precursors. The transformation was initiated by decarboxylation, followed by various spontaneous steps, such as HF elimination and ester hydrolysis. We further compared the oxidation of legacy fluorotelomers using SO4-• versus HO•. The results suggest novel product distribution patterns, depending on the functional group and oxidant dose. The general trends and strategies were also validated by analyzing a mixture of 100000- or 10000-fold diluted aqueous film-forming foam (containing various fluorotelomer surfactants and organics) and a spiked Nafion precursor. Therefore, (1) the combined use of SO4-• and HO• oxidation, (2) the expanded list of standard chemicals, and (3) further elucidation of SO4-• oxidation mechanisms will provide more critical information to probe emerging PFAS pollutants.

Removal of per- and polyfluoroalkyl substances from water by plasma treatment: Insights into structural effects and underlying mechanisms

Non-thermal plasma emerges as a promising technology for per- and polyfluoroalkyl substances (PFAS) decomposition due to its notable efficacy and environmentally friendly characteristics. In this study, we demonstrated the efficacy of a falling film dielectric barrier discharge (DBD) system for the removal of 10 PFAS, including perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkyl sulfonic acids (PFSAs) and hexafluoropropylene oxide (HFPO) oligomer acids. Results showed that compounds with fluoroalkyl chain length>4 were effectively decomposed within 100 min, with long-chain PFAS demonstrating more pronounced removal performance than their short-chain analogues. The superior removal but low defluorination observed in HFPO oligomer acids could be ascribed to their ether-based structural features. The integration of experimental results with density functional theory (DFT) calculations revealed that the synergistic effects of various reactive species are pivotal to their efficient decomposition, with electrons, OH•, and NO2• playing essential roles. In contrast, the degradation of PFSAs was more dependent on electron attack than that of PFCAs and HFPO oligomer acids. Significantly, the most crucial degradation pathway for HFPO oligomer acids was the cleavage of ether CO, whether through radical or electron attack. Furthermore, the demonstrated effective removal in various water matrices showed the potential of the plasma system for removing PFAS in complex aquatic environments. This study provided mechanistic insights into PFAS degradation behavior in plasma processes, and it underscored the vital influence of molecular structures on degradability, thereby contributing to the further development and regulation of plasma-based technologies for treating PFAS in water.

Facile synthesis of ball-milling and oxalic acid co-modified sludge biochar to efficiently activate peroxymonosulfate for sulfamethoxazole degradation: 1O2 and surface-bound radicals

A novel approach of ball milling and oxalic acid was employed to modify sludge-based biochar (BOSBC) to boost its activation performance for peroxymonosulfate (PMS) towards efficient degradation of sulfamethoxazole (SMX). 98.6% of SMX was eliminated by PMS/BOSBC system within 60 min. Furthermore, PMS/BOSBC system was capable of maintaining high removal rates for SMX (>88.8%) in a wide pH range from 3 to 9, and displayed a high tolerance to background electrolytes including inorganic ions and humic acid (HA). Quenching experiments, electron paramagnetic resonance (EPR) analysis, in-situ Raman characterization and PMS decomposition experiments confirmed that the non-radicals of 1O2 and surface-bound radicals were the main contributors to SMX degradation by PMS/BOSBC system. The results of ecotoxicity assessment illustrated that all transformed products (TPs) generated in PMS/BOSBC system were less toxic than that of SMX. After five reuse cycles, PMS/BOSBC system still maintained a high removal rate for SMX (77.8%). Additionally, PMS/BOSBC system exhibited excellent degradation performance for SMX in various real waters (Yangtze River water (76.5%), lake water (74.1%), tap water (86.5%), and drinking water (98.1%)). Overall, this study provided novel insights on non-metal modification for sludge-based biochar and non-radical mechanism, and offered a feasible approach for municipal sludge disposal.

Industrializable and pH-tolerant electropositive imidazolium chloride polymer for high-efficiency removal of perfluoroalkyl carboxylic acids from aqueous solution

In recent years, various materials have been used to adsorb and remove perfluoroalkyl compounds from water. However, most of these materials have limited applications due to their high cost, complex synthesis, inadequate selectivity and sensitivity, and, even worse, the possibility of introducing secondary pollution. Here, under mild conditions, we prepared an inexpensive imidazolium chloride and nitrogen-rich polymer (TAGX-Cl) with a high cationic loading rate and a high yield (>82%). The adsorbent exhibits excellent pH tolerance (pH=1-9) and achieves nearly 99.9% removal of nine perfluoroalkyl carboxylic acids (PFCAs) within 120 min. Experimental data and theoretical simulations confirmed that synergistic electrostatic interactions, hydrogen bonds, and P-π interactions control the adsorptive ability of TAGX-Cl. This work provides a practical strategy for PFCAs removal.

Unveiling per- and polyfluoroalkyl substance contamination in Chinese paper products and assessing their exposure risk

The contamination characteristics, migration patterns and health risks of per- and polyfluoroalkyl substances (PFAS) were investigated in 66 Chinese paper products by using target and non-target screening methods. Among 57 target PFASs, 5 and 6 PFASs were found in the hygiene paper products ( Collapse

Key Words

• Migration
• Non-target analysis
• Paper products
• Per- and polyfluoroalkyl substances
• Risk assessment

Collapse

MESH Headings

• Humans
• Fluorocarbons/analysis
• Ethanol
• Food
• Food Safety
• China
• Alkanesulfonic Acids/analysis

Collapse

Grants Collapse

Affiliation(s)

Yan-Fei Chen SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China
Ting Liu SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China
Li-Xin Hu SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China
Chang-Er Chen SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China
Bin Yang SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China.
Guang-Guo Ying SCNU Environmental Research Institute, Guangdong Provincial Key Laboratory of Chemical Pollution and Environmental Safety & MOE Key Laboratory of Theoretical Chemistry of Environment, South China Normal University, Guangzhou 510006, China; School of Environment, South China Normal University, Guangzhou 510006, China

Collapse

Collaborators Collapse

Field test of thermally activated persulfate for remediation of PFASs co-contaminated with chlorinated aliphatic hydrocarbons in groundwater

The co-occurrence of per- and polyfluoroalkyl substances (PFASs) and chlorinated aliphatic hydrocarbons (CAHs) in groundwater has drawn increased attention in recent years. No studies have been conducted concerning the oxidative degradation of PFASs and/or CAHs by in situ thermally activated persulfate (TAP) in groundwater, primarily due to the difficulty in cost-effectively achieving the desired temperature in the field. In this study, the effects and mechanisms of PFASs degradation by in situ TAP at a site with PFASs and CAHs co-contaminants were investigated. The target temperature of 40.0-70.0 °C was achieved in groundwater, and persulfate was effectively distributed in the demonstration area - the combination of which ensured the degradation of PFASs and CAHs co-contaminants by in situ TAP. It was demonstrated that the reductions of perfluoroalkyl carboxylic acids (PFCAs) concentration in all monitoring wells were in the range of 43.7 %-66.0 % by in situ TAP compared to those maximum rebound values in groundwater, whereas no effective perfluoroalkane sulfonic acids (PFSAs) degradation was observed. The conversion of perfluoroalkyl acids (PFAAs) precursors was one of the main factors leading to the increase in PFCAs concentrations in groundwater during in situ TAP. CAHs were effectively degraded in most monitoring wells, and furthermore, no inhibitory effects of CAHs and Cl- on the degradation of PFASs were observed due to the presence of sufficient persulfate. Additionally, there were significant increases in SO42- concentrations and reductions of pH values in groundwater due to in situ TAP, warranting their long-term monitoring in groundwater. The integrated field and laboratory investigations demonstrated that the reductions in PFCAs and CAHs concentrations can be achieved by the oxidative degradation of in situ TAP.

Reductive degradation mechanism of perfluorooctanoic acid (PFOA) during vacuum ultraviolet (VUV) reactions combining with sulfite and iodide

In this study, PFOA removal and defluorination were examined during vacuum ultraviolet (VUV) photolysis in the presence of sulfite and sulfite/iodide conditions. PFOA (24 μM) degradation rate constant (kobs) and defluorination amount in VUV photolysis, and VUV/sulfite, and VUV/sulfite/iodide reactions under nitrogen-purging condition were 5.50 × 10-3, 7.26 × 10-2, 1.60 × 10-1 min-1, and 34.6, 72.7, 73.9% in 6 h, respectively. When tert-butanol (t-BuOH), NO2-, and NO3- ions were added as radical scavengers, hydrated electrons (eaq-) was confirmed as the main species responsible for degrading PFOA and mediating defluorination in VUV-based reactions. While, during VUV photolysis, short-chain perfluoroalkyl carboxylic acids (PFCAs), such as PFHpA, PFHxA, PFPeA, and PFBA, were mainly produced as transformation products (TPs) by the chain-shortening mechanism, additional 14 and 15 TPs were identified in the VUV/sulfite and VUV/sulfite/iodide reactions by LC-QTOF/MS, respectively. The main degradation mechanisms in these reactions are H-F exchange (e.g., TP395 (m/z = 394.9739) and TP377 (m/z = 376.9838)), •SO3--F exchange (TP474, m/z = 474.9323), carbon double bond formation by defluorination (e.g., TP392 (m/z = 392.9455), TP410 (m/z = 410.9355), and TP436 (m/z = 436.9347)), and H-F exchange followed by hydration reaction (TP393, m/z = 392.9773), respectively. PFOA degradation pathways were proposed for these VUV-based reactions based on the identified TPs, their time profiles, and the density functional theory (DFT). Finally, the toxicity of PFOA and its TPs produced during three reactions were assessed using ECOSAR simulation.

Strategies to improve adsorption and photocatalytic performance of metal-organic frameworks (MOFs) for perfluoroalkyl and polyfluoroalkyl substances (PFASs) removal from water: A review

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) represent a category of persistent and hazardous organic pollutants extensively prevalent across aquatic environments. The combination of adsorption and photocatalytic degradation has been identified as an effective approach for removing trace amounts of PFASs from water. Among the various materials explored for this purpose, metal-organic frameworks (MOFs) have structural solid tunability, and suitable modification methods could endow them with rich adsorption capabilities and excellent photocatalytic performance, which has potential for applications involving the treatment of trace, multi-chain-length PFASs in water. The research within this realm is currently in its nascent phase, and a holistic knowledge of modification methods can provide a comprehensive framework for future studies. Therefore, this review intends to (1) summarize the mechanism underlying the adsorption and photocatalytic removal of PFASs by MOFs; (2) present various modification methods aimed at enhancing the adsorption and photocatalytic performance of MOFs in alignment with the goal mentioned above; (3) provide an outlook on the prospects of utilizing MOFs for PFASs removal based on current trends and data. Ultimately, the findings from these studies will contribute to advancing knowledge in this area and facilitate the development of effective strategies for addressing PFASs contamination in water systems.

New Indole Derivative Heterogeneous System for the Synergistic Reduction and Oxidation of Various Per-/Polyfluoroalkyl Substances: Insights into the Degradation/Defluorination Mechanism

The hydrated electron (eaq-) system is typically suitable for degrading perfluoroalkyl substances (PFASs). To enhance eaq- utilization, we synthesized a new indole compound (DIHA) that forms stable nanospheres (100-200 nm) in water via a supramolecular assembly. Herein, the DIHA nanoemulsion system exhibits high degradation efficiencies toward a broad category of PFASs, regardless of the headgroup, chain length, and branching structure, under UV (254 nm) irradiation. The strong adsorption of PFAS on the DIHA surface ensures its effective degradation/defluorination. Quenching experiments further demonstrated that the reaction took place on the surface of DIHA nanospheres. This specific heterogeneous surface reaction unveiled novel PFAS degradation and defluorination mechanisms that differ from previously reported eaq- systems. First, the photogenerated surface electrons nonselectively attacked multiple C-F bonds of the -CF2- chain. This plays a dominant degrading/defluorinating role in the DIHA system. Second, abundant hydroxyl radicals (•OH) were also produced, leading to synergistic reduction (by surface electron) and oxidation (by surface •OH) in a single system. This facilitates faster and deeper defluorination of different structured PFASs through multiple pathways. The new mechanism inspires the design of innovative organo-heterogeneous eaq- systems possessing synergistic reduction and oxidation functions, thereby making them potentially effective for treating PFAS-contaminated water.

Comparison of the photocatalytic degradability of PFOA, PFOS and GenX using Fe-zeolite in water

Knowledge on the photocatalytic degradability of the emerging poly- and perfluorinated alkyl substances (PFAS) in water, specifically GenX, is limited. GenX has been detected globally in river water and is considered potentially more toxic than legacy PFAS. In this study, we compared the photocatalytic degradability of GenX with the legacy compounds perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) using Fe-zeolite photocatalysts. After 7 h of irradiation, GenX showed lower removal (79%) and defluorination (33%) as compared to PFOA (100% removal and 69% defluorination) and PFOS (100% removal and 51% defluorination). The quasi-first-order degradation rate of GenX (1.5 h1) was 12 and 1.2 times lower than PFOA (18.4 h-1) and PFOS (1.8 h-1), respectively. Additionally, PFOA's defluorination rate (0.9 h-1) was approximately 2.6 and 9 times higher than GenX (0.35 h-1) and PFOS (0.1 h-1), respectively. These outcomes correlate with GenX's lower hydrophobicity, leading to reduced adsorption (40%) compared to PFOA (99%) and PFOS (87%). Based on identified transformation products, we proposed a GenX degradation pathway, resulting in ultra-short-chain PFASs with a chain length of 2 and 3 carbon atoms, while PFOA and PFOS degraded stepwise, losing 1 carbon-fluorine bond at a time, leading to gradually shorter chain lengths (from 7 to 2 carbon atoms). In conclusion, GenX is more challenging to remove and degrade due to its lower adsorption on the photocatalyst, potential steric hindrance, and higher production of persistent ultra-short-chain transformation products through photocatalysis.

A review of innovative approaches for onsite management of PFAS-impacted investigation derived waste

The historic use of aqueous film-forming foam (AFFF) has led to widespread detection of per- and polyfluoroalkyl substance (PFAS) in groundwater, soils, sediments, drinking water, wastewater, and receiving aquatic systems throughout the United States (U.S.). Prior to any remediation activities, in order to identify the PFAS-impacted source zones and select the optimum management approach, extensive site investigations need to be conducted. These site investigations have resulted in the generation of considerable amount of investigation-derived waste (IDW) which predominantly consists of well purging water and drill fluid, equipment washing residue, soil, drill cuttings, and residues from the destruction of asphalt and concrete surfaces. IDW is often impacted by varying levels of PFAS which poses a substantial challenge concerning disposal to prevent potential mobilization of PFAS, logistical complexities, and increasing requirement for storage as a result of accumulation of the associated wastes. The distinct features of IDW involve the intermittent generation of waste, substantial volume of waste produced, and the critical demand for onsite management. This article critically focuses on innovative technologies and approaches employed for onsite treatment and management of PFAS-impacted IDW. The overall objective of this study centers on developing and deploying end-of-life treatment technology systems capable of facilitating unrestricted disposal, discharge, and/or IDW reuse on-site, thereby reducing spatial footprints and mobilization time.

Products, reactive species and mechanisms of PFOA degradation in a self-pulsing discharge (SPD) plasma reactor

Non-thermal plasma is a promising tool for novel technologies to treat water contaminated by recalcitrant pollutants. We report here on products, reactive species and mechanisms of the efficient degradation of perfluorooctanoic acid (PFOA) achieved with a self-pulsing discharge developed previously in our lab. Air or argon were used as plasma feed gas, ultrapure or tap water as aqueous medium. Identified organic intermediate products arise from chain-shortening and defluorination reactions, the latter achieving not only C-F to C-H exchange (hydro-de-fluorination), as reported in the literature, but also C-F to C-OH exchange (hydroxy-de-fluorination). In contrast with chain-shortening, yielding lower homologues of PFOA via selective cleavage of the C-C bond at the carboxylate group, defluorination occurs at various sites of the alkyl chain giving mixtures of different isomeric products. Plasma generated reactive species were investigated under all experimental conditions tested, using specific chemical probes and optical emission spectroscopy. Cross-analysis of the results revealed a striking direct correlation of energy efficiency for PFOA degradation and for production of plasma electrons. In contrast, no correlation was observed for emission bands of either Ar+ or OH radical. These results indicate a prevalent role of plasma electrons in initiating PFOA degradation using self-pulsing discharge plasma above the liquid.

Efficient removal of per- and polyfluoroalkyl substances from biochar composites: Cyclic adsorption and spent regenerant degradation

In order to solve the problem of efficient desorption of per- and polyfluoroalkyl substances (PFAS) and regeneration of adsorbents, a novel biochar composite was prepared based on the quaternary ammonium groups and hydrophobicity of sulfobetaine polymer, which can be used for the efficient removal of various PFASs and has great regeneration ability. Through adsorption, regeneration and degradation experiment, the comprehensive effect of the novel biochar composite on the whole process of removal of PFAS was systematically investigated. The results showed that the maximum adsorption capacity of PFOS, PFOA, PFBS, and PFBA reached 634 mg/g, 536 mg/g, 301 mg/g and 264 mg/g, respectively. The adsorption process involved hydrophobicity, electrostatic, pore diffusion and complexation. The NaI + NaOH solution was used at 50 °C to achieve efficient regeneration of the adsorbent, which can be recycled more than 4 times. When the vacuum-ultraviolet (VUV)/sulfite reduction system was used for deep degradation of the regenerated solution, the effect of hydrated electrons on PFAS was enhanced due to the inclusion of NaI and NaOH in the regeneration reagent, resulting in an increase in the degradation efficiency (89.1%-99.9%) and defluorination efficiency (63.3%-84.1%). Based on the performance of BC-P(SB-co-AM) and the treatment efficiency of PFAS, the design idea of the whole process treatment technology of PFAS proposed in this work is expected to hold great promise in environmental applications. This work provides a novel idea and system for the efficient adsorption removal and desorption of PFAS, and subsequent deep degradation.

Differences between reductive defluorination of perfluorooctanoic acid by chlorination, bromination, and iodization in the vacuum-ultraviolet/sulfite process

The introduction of iodide (I-) has broad perspectives on the decomposition of perfluorocarboxylates (PFCAs, CnF2n+1COO-). However, the iodinated substances produced are highly toxic synthetic chemicals, hence, it is urgent to find a similar alternative with less toxicity. In this work, the defluorination of perfluorooctanoic acid (PFOA) by I-, bromide (Br-) and chlorine (Cl-) was systematically compared in the VUV/sulfite process. Results indicated that the PFOA defluorination rates increased with increasing nucleophilicity of halogens (I > Br > Cl). Meanwhile, the introduction of I-, Br-, and Cl- reduced the interference of the coexisting water matrix on the degrading influence of PFOA. The in situ produced eaq-, SO3•-, H•, and HO• were recognized, among the addition of I- maximized the relative contribution of eaq- but Br- and Cl- decreased that of H• and other radicals. Additionally, HPLC/MS analysis revealed the presence of I-, Br-, and Cl- had a vital impact on the difference in product concentrations, while they had a negligible effect on the change in the pathway of degradation. Overall, this study demonstrated the similarities and differences between I-, Br-, and Cl-, which has significant implications for further understanding VUV/sulfite degradation.

Deeper Defluorination and Mineralization of a Novel PFECA (C7 HFPO-TA) in Vacuum UV/Sulfite: Unique Mechanism of H/OCF3 Exchange

C7 HFPO-TA is a newly identified alternative to PFOA, which possesses a unique structure fragment (CF3O-CF(CF3)-). In this study, we evaluated the chemical reactivity of C7 HFPO-TA in advanced oxidation and reduction processes for the first time, which revealed a series of unexpected transformation mechanisms. The results showed that reductive degradation based on hydrated electrons (eaq-) was more feasible for the degradation of C7 HFPO-TA. For oxidative degradation, the branched -CF3 at the α-position carbon posed as the spatial hindrance, shielding the attack of SO4•- to -COO-. The synergistic effects of HO•/eaq- and direct photolysis led to deeper defluorination and mineralization of C7 HFPO-TA in the vacuum UV/sulfite (VUV/SF) process. We identified a unique H/OCF3 exchange that converted the CF3O-CF(CF3)- into H-CF(CF3)- directly, and the SO3•- involved mechanism of C7 HFPO-TA for the first time. We revealed the branched -CF3 connected to the same carbon next to the CF3O- group affected the C-O bond cleavage site, preferring the H/OCF3 exchange pathway. The defluorination of C7 HFPO-TA was compared with PFOA and three PFECAs in the VUV/SF process, which was highly dependent on structures. Degradation kinetics, theoretical calculations, and products' analysis provided an in-depth perspective on the degradation mechanisms and pathways of C7 HFPO-TA.

Aerobic Biotransformation and Defluorination of Fluoroalkylether Substances (ether PFAS): Substrate Specificity, Pathways, and Applications

Fluoroalkylether substances (ether PFAS) constitute a large group of emerging PFAS with uncertain environmental fate. Among them, GenX is the well-known alternative to perfluorooctanoic acid and one of the six proposed PFAS to be regulated by the U.S. Environmental Protection Agency. This study investigated the structure-biodegradability relationship for 12 different ether PFAS with a carboxylic acid headgroup in activated sludge communities. Only polyfluorinated ethers with at least one -CH2- moiety adjacent to or a C=C bond in the proximity of the ether bond underwent active biotransformation via oxidative and hydrolytic O-dealkylation. The bioreactions at ether bonds led to the formation of unstable fluoroalcohol intermediates subject to spontaneous defluorination. We further demonstrated that this aerobic biotransformation/defluorination could complement the advanced reduction process in a treatment train system to achieve more cost-effective treatment for GenX and other recalcitrant perfluorinated ether PFAS. These findings provide essential insights into the environmental fate of ether PFAS, the design of biodegradable alternative PFAS, and the development of cost-effective ether PFAS treatment strategies.

Electrochemical degradation of per- and poly-fluoroalkyl substances in the presence of natural organic matter

Per- and poly-fluoroalkyl substances (PFAS), a contentious group of highly fluorinated, persistent, and potentially toxic chemicals, have been associated with human health risks. Currently, treatment processes that destroy PFAS are challenged by transforming these contaminants into additional toxic substances that may have unknown impacts on human health and the environment. Electrochemical oxidation (EO) is a promising method for scissoring long-chain PFAS, especially in the presence of natural organic matter (NOM), which interferes with most other treatment approaches used to degrade PFAS. The EO method can break the long-chain PFAS compound into short-chain analogs. The underlying mechanisms that govern the degradation of PFAS by electrochemical processes are presented in this review. The state-of-the-art anode and cathode materials used in electrochemical cells for PFAS degradation are overviewed. Furthermore, the reactor design to achieve high PFAS destruction is discussed. The challenge of treating PFAS in water containing NOM is elucidated, followed by EO implementation to minimize the influence of NOM on PFAS degradation. Finally, perspectives related to maximizing the readiness of EO technology and optimizing process parameters for the degradation of PFAS are briefly discussed.

Amine-Functionalized A-Center Sphalerite for Selective and Efficient Destruction of Perfluorooctanoic Acid

Perfluorochemicals (PFCs), especially perfluorooctanoic acid (PFOA), have contaminated the ground and surface waters throughout the world. Efficient removal of PFCs from contaminated waters has been a major challenge. This study developed a novel UV-based reaction system to achieve fast PFOA adsorption and decomposition without addition of sacrificial chemicals by using synthetic photocatalyst sphalerite (ZnS-[N]) with sufficient surface amination and defects. The obtained ZnS-[N] has the capability of both reduction and oxidation due to the suitable band gap and photo-generated hole-trapping properties created by surface defects. The cooperated organic amine functional groups on the surface of ZnS-[N] play a crucial role in the selective adsorption of PFOA, which guarantee the efficient destruction of PFOA subsequently, and 1 μg L^-1 PFOA could be degraded to <70 ng L^-1 after 3 h in the presence of 0.75 g L^-1 ZnS-[N] under 500 W UV irradiation. In this process, the photogenerated electrons (reduction) and holes (oxidation) on the ZnS-[N] surface work in a synergistic manner to achieve complete defluorination of PFOA. This study not only provides promising green technology for PFC-pollution remediation but also highlights the significance of developing a target system capable of both reduction and oxidation for PFC degradation.

Per- and polyfluoroalkyl substances (PFAS) in surface sediments: Occurrence, patterns, spatial distribution and contribution of unattributed precursors in French aquatic environments

While perfluoroalkyl sulfonic acids (PFSAs) and perfluoroalkyl carboxylic acids (PFCAs) are ubiquitous in aquatic environments, non-targeted methods have recently revealed the presence of numerous unidentified per- and polyfluoroalkyl substances (PFAS). Besides those methods, the total oxidizable precursor (TOP) assay has proved useful to estimate the contribution of unattributed perfluoroalkyl acids precursors (pre-PFAAs). In this study, an optimized extraction method was developed to examine the spatial distribution of 36 targeted PFAS in surface sediments collected at French nationwide scale (n = 43), including neutral, anionic and zwitterionic molecules. In addition, a TOP assay procedure was implemented to estimate the contribution of unattributed pre-PFAAs in these samples. Conversion yields of targeted pre-PFAAs were determined for the first time under realistic conditions and led to differences in oxidation profiles compared to the common spiked ultra-pure water method. PFAS were detected in 86 % of samples and ∑PFAS_targeted was in the range < Limit of Detection - 23 ng g^-1 dry weight (dw) (median: 1.3 ng g^-1 dw), with ∑pre-PFAAs_targeted representing on average 29 ± 26 % of ∑PFAS. Among pre-PFAAs, compounds of emerging interest such as the fluorotelomer sulfonamidoalkyl betaines 6:2 FTAB and 8:2 FTAB were respectively detected in 38 % and 24 % of samples, with levels similar to those of L-PFOS (<0.36-2.2, <0.50-6.8 and < 0.08-5.1 ng g^-1 dw, respectively). A hierarchical cluster analysis coupled with a geographic information system-based approach revealed similarities between groups of sampling sites. For instance, elevated contribution of FTABs were associated with the proximity to airport activities where betaine-based aqueous film-forming foam (AFFFs) might have been used. In addition, unattributed pre-PFAAs were strongly correlated with ∑PFAS_targeted and they accounted for 58 % of ∑PFAS (median value); they were generally found in larger quantity near industrial and urban areas where the highest ∑PFAS_targeted were also observed.

Reactivity of Dissolved Organic Matter with the Hydrated Electron: Implications for Treatment of Chemical Contaminants in Water with Advanced Reduction Processes

Advanced reduction processes (ARP) have garnered increasing attention for the treatment of recalcitrant chemical contaminants, most notably per- and polyfluoroalkyl substances (PFAS). However, the impact of dissolved organic matter (DOM) on the availability of the hydrated electron (eaq-), the key reactive species formed in ARP, is not completely understood. Using electron pulse radiolysis and transient absorption spectroscopy, we measured bimolecular reaction rates constant for eaq- reaction with eight aquatic and terrestrial humic substance and natural organic matter isolates ( kDOM,eaq-), with the resulting values ranging from (0.51 ± 0.01) to (2.11 ± 0.04) × 108 MC-1 s-1. kDOM,eaq- measurements at varying temperature, pH, and ionic strength indicate that activation energies for diverse DOM isolates are ≈18 kJ mol-1 and that kDOM,eaq- could be expected to vary by less than a factor of 1.5 between pH 5 and 9 or from an ionic strength of 0.02 to 0.12 M. kDOM,eaq- exhibited a significant, positive correlation to % carbonyl carbon for the isolates studied, but relationships to other DOM physicochemical properties were surprisingly more scattered. A 24 h UV/sulfite experiment employing chloroacetate as an eaq- probe revealed that continued eaq- exposure abates DOM chromophores and eaq- scavenging capacity over a several hour time scale. Overall, these results indicate that DOM is an important eaq- scavenger that will reduce the rate of target contaminant degradation in ARP. These impacts are likely greater in waste streams like membrane concentrates, spent ion exchange resins, or regeneration brines that have elevated DOM concentrations.

Complete defluorination of perfluorooctanoic acid (PFOA) by ultrasonic pyrolysis towards zero fluoro-pollution

Advanced oxidation/reduction of PFAS is challenged and concerned by the formation of toxic, short-chain intermediates during water treatments. In this study, we investigated the complete defluorination of PFOA by ultrasound/persulfate (US/PS) with harmless end-products of CO₂, H₂O, and F^‒ ions. We observed 100% defluorination after 4 h of US treatment alone with a power input of 900 W. PS addition, however, suppressed defluorination. We demonstrated by kinetics-fitted Langmuir-type adsorption modeling, the added PS increased competition with PFOA for adsorption sites on the bubble-water interface where radical oxidation and pyrolysis may occur. Providing sulfate (SO₄^•-) and hydroxyl (^•OH) radicals by means other than US did not defluorinate PFOA, indicating that pyrolysis likely contributes to the high defluorination performance. Bond dissociation energies for CC and CF were independent of pressure but decreased at elevated temperatures within cavitation bubbles (i.e., 5000 K) favoring the pyrolysis reactions. Furthermore, bond length calculations indicated that PFOA cleavage only begins to occur at temperatures in excess of those generated at the bubble interface (i.e., >1500 K) at the femtosecond level. This suggests that PFOA vaporizes or injects by nanodrops upon attachment to the cavitation bubble, enters the bubble, and is then cleaved within the bubble by pyrolysis. Our research in low-frequency ultrasonic horn system challenges the previous founding that defluorination of PFOA initiates and occurs at the bubble-water interface. We describe here that supplementing US-based processes with complementary treatments may have undesired effects on the efficacy of US. The mechanistic insights will further promote the implementation of US technology for PFAS treatment in achieving the zero fluoro-pollution goal.

Nontarget analysis and fluorine atom balances of transformation products from UV/sulfite degradation of perfluoroalkyl contaminants

Per- and polyfluoroalkyl substances (PFAS) are a class of thousands of highly fluorinated, anthropogenic compounds that are used in a wide variety of consumer applications. Due to their widespread use and high persistence, PFAS are ubiquitous in drinking water, which is of concern due to the threats these compounds pose to human health. Reduction via the hydrated electron is a promising technology for PFAS remediation and has been well-studied. However, since previous work rarely reports fluorine atom balances and often relies on suspect screening, some transformation products are likely unaccounted for. Therefore, we performed non-target analysis using high-resolution mass spectrometry on solutions of perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS), perfluorooctanoate (PFOA), and 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propanoate (GenX) that had been treated with UV/sulfite to produce hydrated electrons. We determined fluorine atom balances for all compounds studied, finding high fluorine atom balances for PFOS and PFBS. PFOA and GenX had lower overall fluorine atom balances, likely due to the production of volatile or very polar transformation products that were not measured by our methods. Transformation products identified by our analysis were consistent with literature, with a few exceptions. Namely, shorter-chain perfluorosulfonates (PFSA) and their H/F substituted counterparts were also detected from PFOS. This is an unexpected result based on literature, as no documented pathway exists for the formation of shorter-chain PFSA during UV/sulfite treatment. Furthermore, the nontarget approach we employed allowed for identification of novel, unsaturated products from the hydrated electron treatment of perfluorooctanesulfonate (PFOS) that warrant further investigation.

Solvent-Free, Ambient Temperature and Pressure Destruction of Perfluorosulfonic Acids under Mechanochemical Conditions: Degradation Intermediates and Fluorine Fate

Perfluorosulfonic acids (PFSAs) are a recalcitrant subclass of per- and polyfluoroalkyl substances (PFASs) linked to numerous negative health effects in humans. Scalable technologies that effectively destroy PFSAs will greatly reduce the future health and ecological impact of these "forever chemicals". Herein, we show that several PFSAs undergo facile mechanochemical destruction (MCD) in the presence of quartz sand (SiO₂). This process operates in the absence of solvent, at ambient temperature and pressure, generating a benign solid byproduct. Quantitative analysis of milled samples revealed high destruction efficiencies of 99.95% to 100% for five different PFSAs subjected to MCD conditions in the presence of SiO₂ only. Extensive nontargeted analysis showed that, during degradation, other PFASs form and are ultimately destroyed upon extended mechanochemical treatment. Direct polarization (DP) and cross-polarization (CP) solid-state nuclear magnetic resonance (SSNMR) spectroscopy showed abundant silicon-fluorine (Si-F) bond formation post-MCD, indicating that fluorine was secured in a stable reservoir. Collectively, these results identified the degradation profile for an environmentally sound and effective PFSA degradation process that is amenable to scale-up.

Total oxidizable precursors assay for PFAS in human serum

Per- and polyfluoroalkyl substances (PFAS) are a class of chemicals including over 4700 substances. As a limited number of PFAS is routinely analyzed in human serum, complementary analytical methods are required to characterize the overlooked fraction. A promising tool is the total oxidizable precursors (TOP) assay to look for precursors by oxidation to perfluoroalkyl acids (PFAA). The TOP assay was originally developed for large volumes of water and had to be adapted for 250 μL of human serum. Optimization of the method was performed on serum samples spiked with model precursors. Oxidative conditions similar to previous TOP assay methods were not sufficient for complete oxidation of model precursors. Prolonged heating time (24 h) and higher oxidant amount (95 mg of Na₂S₂O₈ per 225 μL of serum) were needed for complete conversion of the model precursors and accomplishing PFAA yields of 35-100 %. As some precursors are not fully converted to PFAA, the TOP assay can only provide semi-quantitative estimates of oxidizable precursors in human serum. However, the TOP assay can be used to give indications about the identity of unknown precursors by evaluating the oxidation products, including perfluoroalkyl sulfonic acids (PFSA) and perfluoroalkyl ether carboxylic acids (PFECA). The optimized TOP assay for human serum opens the possibility for high-throughput screening of human serum for undetected PFAA precursors.

Nitrate promoted defluorination of perfluorooctanoic acid in UV/sulfite system: Coupling hydrated electron/reactive nitrogen species-mediated reduction and oxidation

A significantly accelerated defluorination of recalcitrant perfluorooctanoic acid (PFOA) was explored with the co-present nitrate (20 mg L^-1) by UV/sulfite treatment (UV/sulfite-nitrate). The deep defluorination of PFOA and complete denitrification of nitrate were simultaneously achieved in UV/sulfite-nitrate system. At the initial 30 min, PFOA defluorination exhibited an induction period, exactly corresponding to the removal of the co-existed nitrate. Upon the induction period passed, an accelerated removal of PFOA (5 mg L^-1) occurred, nearly 100% defluorination ratio reached within 2 h. Compared with those in UV/sulfite, the kinetics of PFOA decay, defluorination, and transformation product formations were greatly enhanced in UV/sulfite-nitrate system. Reactive nitrogen species (RNS) generated from e_aq^--induced reduction of nitrate were found to play significant roles on the promoted defluorination apart from e_aq^--mediated reductive defluorination. The investigations on solution pH (7.0-11.0) confirmed that the reductive defluorination of PFOA was more efficient under alkaline conditions, however, the presence of nitrate can promote the defluorination even under neutral pH. Theoretical calculations of Fukui function demonstrated that RNS could easily launch electrophilic attack toward H-rich moieties of fluorotelomer carboxylates (FTCAs, C_nF_2n+1-(CH₂)_m-COO^-), more persistent intermediates (formed via H/F exchange), and convert FTCAs into shorter-chain perfluorinated carboxylic acids, thus facilitating the deep defluorination. Along with the analysis on the denitrification products, the liberation of fluoride ions and generated intermediates, possible decomposition pathways were proposed. This work highlights the indispensable synergy from e_aq^-/RNS with integrated reduction and oxidation on PFOA defluorination and will advance remediation technologies of perfluorinated compound contaminated water.

Application of High-Resolution Mass Spectrometry to Evaluate UV-Sulfite-Induced Transformations of Per- and Polyfluoroalkyl Substances (PFASs) in Aqueous Film-Forming Foam (AFFF)

UV-sulfite has been shown to effectively degrade per- and polyfluoroalkyl substances (PFASs) in single-solute experiments. We recently reported treatment of 15 PFASs, including perfluoroalkyl sulfonic acids (PFSAs), perfluoroalkyl carboxylic acids (PFCAs), and fluorotelomer sulfonic acids (FTSs), detected in aqueous film-forming foam (AFFF) using high-resolution liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) targeted analysis. Here, we extend the analysis within those original reaction solutions to include the wider set of PFASs in AFFF for which reactivity is largely unknown by applying recently established LC-QTOF-MS suspect screening and semiquantitative analysis protocols. Sixty-eight additional PFASs were detected (15 targeted + 68 suspect screening = 83 PFASs) with semiquantitative analysis, and their behavior was binned on the basis of (1) detection in untreated AFFF, (2) PFAS photogeneration, and (3) reactivity. These 68 structures account for an additional 20% of the total fluorine content in the AFFF (targeted + suspect screening = 57% of total fluorine content). Structure-reactivity trends were also revealed. During treatment, transformations of highly reactive structures containing sulfonamide (-SO₂N-) and reduced sulfur groups (e.g., -S- and -SO-) adjacent to the perfluoroalkyl [F(CF₂)_n-] or fluorotelomer [F(CF₂)_n(CH₂)₂-] chain are likely sources of PFCA, PFSA, and FTS generation previously reported during the early stages of reactions. The results also show the character of headgroup moieties adjacent to the F(CF₂)_n-/F(CF₂)_n(CH₂)₂- chain (e.g., sulfur oxidation state, sulfonamide type, and carboxylic acids) and substitution along the F(CF₂)_n- chain (e.g., H-, ketone, and ether) together may determine chain length-dependent reactivity trends. The results highlight the importance of monitoring PFASs outside conventional targeted analytical methodologies.

Photodegradation of per- and polyfluoroalkyl substances in water: A review of fundamentals and applications

Per- and polyfluoroalkyl substances (PFAS) are persistent, mobile, and toxic chemicals that are hazardous to human health and the environment. Several countries, including the United States, plan to set an enforceable maximum contamination level for certain PFAS compounds in drinking water sources. Among the available treatment options, photocatalytic treatment is promising for PFAS degradation and mineralization in the aqueous solution. In this review, recent advances in the abatement of PFAS from water using photo-oxidation and photo-reduction are systematically reviewed. Degradation mechanisms of PFAS by photo-oxidation involving the holes (h_vb⁺) and oxidative radicals and photo-reduction using the electrons (e_cb^-) and hydrated electrons (e_aq^-) are integrated. The recent development of innovative heterogeneous photocatalysts and photolysis systems for enhanced degradation of PFAS is highlighted. Photodegradation mechanisms of alternative compounds, such as hexafluoropropylene oxide dimer acid (GenX) and chlorinated polyfluorinated ether sulfonate (F-53B), are also critically evaluated. This paper concludes by identifying major knowledge gaps and some of the challenges that lie ahead in the scalability and adaptability issues of photocatalysis for natural water treatment. Development made in photocatalysts design and system optimization forges a path toward sustainable treatment of PFAS-contaminated water through photodegradation technologies.

Use of a horizontal ball mill to remediate per- and polyfluoroalkyl substances in soil

There is a need for destructive technologies for per- and polyfluoroalkyl substances (PFAS) in soil. While planetary ball mill have been shown successful degradation of PFAS, there are issues surrounding scale up (maximum size is typically 0.5 L cylinders). While having lower energy outputs, horizontal ball mills, for which scale up is not a limiting factor, already exist at commercial/industrial sizes from the mining, metallurgic and agricultural industries, which could be re-purposed. This study evaluated the effectiveness of horizontal ball mills in degrading perfluorooctanesulfonate (PFOS), 6:2 fluorotelomer sulfonate (6:2 FTSA), and aqueous film forming foam (AFFF) spiked on nepheline syenite sand. Horizontal ball milling was also applied to two different soil types (sand dominant and clay dominant) collected from a firefighting training area (FFTA). Liquid chromatography tandem mass spectrometry was used to track 21 target PFAS throughout the milling process. High-resolution accurate mass spectrometry was also used to identify the presence and degradation of 19 non-target fluorotelomer substances, including 6:2 fluorotelomer sulfonamido betaine (FtSaB), 7:3 fluorotelomer betaine (FtB), and 6:2 fluorotelomer thioether amido sulfonate (FtTAoS). In the presence of potassium hydroxide (KOH), used as a co-milling reagent, PFOS, 6:2 FTSA, and the non-target fluorotelomer substances in the AFFF were found to undergo upwards of 81%, 97%, and 100% degradation, respectively. Despite the inherent added complexity associated with field soils, better PFAS degradation was observed on the FFTA soils over the spiked NSS, and more specifically, on the FFTA clay over the FFTA sand. These results held through scale-up, going from the 1 L to the 25 L cylinders. The results of this study support further scale-up in preparation for on-site pilot tests.

Low-temperature mineralization of perfluorocarboxylic acids

Per- and polyfluoroalkyl substances (PFAS) are persistent, bioaccumulative pollutants found in water resources at concentrations harmful to human health. Whereas current PFAS destruction strategies use nonselective destruction mechanisms, we found that perfluoroalkyl carboxylic acids (PFCAs) could be mineralized through a sodium hydroxide-mediated defluorination pathway. PFCA decarboxylation in polar aprotic solvents produced reactive perfluoroalkyl ion intermediates that degraded to fluoride ions (78 to ~100%) within 24 hours. The carbon-containing intermediates and products were inconsistent with oft-proposed one-carbon-chain shortening mechanisms, and we instead computationally identified pathways consistent with many experiments. Degradation was also observed for branched perfluoroalkyl ether carboxylic acids and might be extended to degrade other PFAS classes as methods to activate their polar headgroups are identified.

Enhancing fluoroglucocorticoid defluorination using defluorinated functional strain Acinetobacter. pittii C3 via humic acid-mediated biotransformation

Defluorination is a key factor in reducing biologically accumulated carcinogenic and teratogenic toxicity of fluoroglucocorticoids (FGCs). To enhance defluorination efficiency, a highly efficient defluorination-degrading strain Acinetobacter. pittii C3 was isolated, and the promotion mechanism through humic acid (HA)-mediated biotransformation was investigated. Optimal biodegradation conditions for Acinetobacter sp. pittii C3 were pH of 7.0, temperature of 25 ℃, and HA content of 5.5 mg/L, according to response surface methodology analysis. The attenuation rate constant and maximum defluorination percentage of triamcinolone acetonide (TA) in HA-mediated biotransformation system (HA-C3) were 3.99 × 10^-2 and 96%, respectively, which were 2.22 and 1.24 times higher than those in the unitary C3 biodegradation system (U-C3), respectively. The major defluorination pathways included elimination, hydrolysis, and hydrogenation, with contributions of 24.5%, 32.4%, and 43.1%, respectively. The bio-reductive hydrodefluorination rate was enhanced by 1.89 times that of HA-mediated, while the other two defluorination pathways exhibited insignificant changes. HA, as the congeries of negatively charged microbes and hydrophobic TA, accelerates the electron transfer rate between Acinetobacter. pittii C3 and TA through the quinone groups. Furthermore, the mutual conversion between the functional groups of hydroxyl oxidation and ketone reduction of HA provided electron donors for TA reductive defluorination and hydrogenation and electron acceptors for TA oxidation. This study provides an effective strategy for FGC-enhanced detoxification using natural HA.

Elucidating degradation mechanisms for a range of per- and polyfluoroalkyl substances (PFAS) via controlled irradiation studies

Per- and polyfluoroalkyl substances (PFAS) are a challenging class of environmental pollutants due to a lack of available destructive remediation technologies. Understanding the fundamental mechanisms for degradation of PFAS is key for the development of field scalable and in-situ destructive based remediation technologies. This study aimed to elucidate and refine the current understanding of PFAS degradation mechanisms in water through a series of controlled gamma irradiation studies. Gamma irradiation of PFAS was performed using a cobalt-60 source in a batch irradiation up to 80 kGy at the Australian Nuclear Science and Technology Organisation. Perfluorooctanoic acid (PFOA), perfluorooctanesulfonic acid (PFOS), 6:2 fluorotelomer sulfonate (6:2 FTS), and a suite of thirteen different PFAS (including C4-C12 PFCAs, C4, C6, C8 PFSAs, and FOSA) were irradiated to investigate degradation, influence of pH, chain length, and transformation. High resolution mass spectrometry was used to identify more than 80 fluorinated transformation products throughout the degradation experiments. These included the -F/+H, -F/+OH, -F/CH₂OH exchanged PFAS and n - 1 PFCA, amongst others. Given the reactive species present (hydroxyl radicals (·OH), hydrogen radicals (·H) and aqueous electrons (e^-_aq)), and the degradation products formed it was shown that aqueous electrons were the key reactive species responsible for initial PFAS degradation. Most importantly, based on degradation product formation, we found that the initial -F/+H does not have to occur at the α-fluoride (nearest the functional head group), rather occurring throughout the chain length leading to more complex degradation pathways than previously postulated. While our results support some of the reaction steps postulated in the literature, we have developed a unified 16 step and 3 pathway schematic of degradation supported by experimental observations.