Selective Capacitive Removal of Heavy Metal Ions from Wastewater over Lewis Base Sites of S-Doped Fe-N-C Cathodes via an Electro-Adsorption Process

Sustainable Pb(II) Removal and Recovery from Wastewater Using a Bioinspired Metal-Phenolic Hybrid Membrane with Efficient Regeneration

High-performance adsorbents often require efficient selectivity in wastewater, recoverability, and ease of multiple regeneration cycles, but achieving this remains a significant challenge. We report a new strategy for the efficient removal of lead (Pb(II)) from contaminated water streams using an innovative tannic acid (TA)-Fe(III)-based metal-phenolic network (MPN) hybrid membrane (MPN-PAM). This novel membrane exploits the tunable pH-sensitive coordination structure of the MPN to achieve selective removal and recovery of Pb(II) while enabling efficient membrane regeneration by filtration. This membrane demonstrates superior selectivity for Pb(II) with a removal efficiency of up to 98 % and an adsorption capacity of approximately 117.58 mg/g, even in the presence of high salinity, as well as coexisting heavy metals. The membrane maintains high Pb(II) removal efficiency over 20 consecutive cycles and 95 % efficiency over 10 regeneration cycles. Under continuous operation, it treats approximately 85 L per m2 of membrane, reducing Pb(II) concentrations to trace levels (~40 μg/L), meeting electroplating wastewater standard (GB21900-2008). Additionally, even low concentrations of Pb(II) (<5 mg/L) are efficiently purified to below WHO drinking water standard (10 μg/L). The operational cost for treating Pb(II)-contaminated wastewater is about $0.13 per ton, highlighting the cost-effectiveness and potential for large-scale application in wastewater treatment.

Harnessing Holey MXene/Graphene Oxide Heterostructure to Maximize Ion Channels in Lamellar Film for High-Performance Capacitive Deionization

2D Ti3C2Tx MXene-based film electrodes with metallic conductivity and high pseudo-capacitance are of considerable interest in cutting-edge research of capacitive deionization (CDI). Further advancement in practical use is however impeded by their intrinsic limitations, e.g., tortuous ion diffusion pathway of layered stacking, vulnerable chemical stability, and swelling-prone nature of hydrophilic MXene nanosheet in aqueous environment. Herein, a nanoporous 2D/2D heterostructure strategy is established to leverage both merits of holey MXene (HMX) and holey graphene oxide (HGO) nanosheets, which optimize ion transport shortcuts, alleviate common restacking issues, and improve film's mechanical and chemical stability. In this design, the nanosized in-plane holes in both handpicked building blocks build up ion diffusion shortcuts in the composite laminates to accelerate the transport and storage of ions. As a direct outcome, the HMX/rHGO films exhibit remarkable desalination capacity of 57.91 mg g-1 and long-term stability in 500 mg L-1 NaCl solution at 1.2 V. Moreover, molecular dynamics simulations and ex situ wide angle X-ray scattering jointly demonstrate that the conductive 2D/2D networks and ultra-short ion diffusion channels play critical roles in the ion intercalation/deintercalation process of HMX/rHGO films. The study paves an alternative design concept of freestanding CDI electrodes with superior ion transport efficiency.

Generalized and Scalable Synthesis of Manganese Dioxide-Based Tubular Micromotors for Heavy Metal Ion Removal

Synthetic nano- and micromachines hold immense promise in biomedicine and environmental science. Currently, bubble-driven tubular micro/nanomotors have garnered increasing attention owing to their exceptional high-speed self-propulsions. However, complex and low-yield preparation methods have hindered their widespread applications. Herein, we present a generalized, scalable, and low-cost electrospinning-based strategy to fabricate MnO2-based composite tubular micromotors (MnO2-TMs) for efficient heavy metal ion removal. The inherent flexibility of precursor nanofibers derived from diverse matrix materials enables the creation of MnO2-TMs with a wide range of morphologies. In response to morphology changes, the MnO2-TMs, based on a bubble-propelled mechanism, exhibit multimodal motion patterns, including linear, circular, and spiral to stochastic swinging. To elucidate the underlying morphology-to-motion relationship, we conducted systematic simulations of fluid dynamics around the MnO2-TMs. Furthermore, by incorporation of Fe3O4 nanoparticles, the capabilities of MnO2-TMs can be expanded to include magnetic manipulation for directional navigation and efficient retrieval. Benefiting from these attributes, MnO2-TMs excel in removing heavy metal ions from water. The developed MnO2-MnWO4@Fe3O4 TMs exhibit prominent adsorption capacities of 586.5 mg g-1 for Cu2+ and 156.4 mg g-1 for Pb2+. Notably, the magnetic property facilitates rapid separation and retrieval of the micromotors, and the absorbed ions can be simply recovered by pH adjustment. This work establishes a general framework for developing MnO2-based tubular micro/nanomotors to address environmental challenges.

Photo-induced protonation assisted nano primary battery for highly efficient immobilization of diverse heavy metal ions

Highly-stable heavy metal ions (HMIs) appear long-term damage, while the existing remediation strategies struggle to effectively remove a variety of oppositely charged HMIs without releasing toxic substances. Here we construct an iron-copper primary battery-based nanocomposite, with photo-induced protonation effect, for effectively consolidating broad-spectrum HMIs. In FCPBN, Fe/Cu cell acts as the reaction impetus, and functional graphene oxide modified by carboxyl and UV-induced protonated 2-nitrobenzaldehyde serves as an auxiliary platform. Due to the groups and built-in electric fields under UV stimuli, FCPBN exhibits excellent affinity for ions, with a maximum adsorption rate constant of 974.26 g∙mg-1∙min-1 and facilitated electrons transfer, assisting to reduce 9 HMIs including Cr2O72-, AsO2-, Cd2+ in water from 0.03 to 3.89 ppb. The cost-efficiency, stability and collectability of the FCPBN during remediation, and the beneficial effects on polluted soil and the beings further demonstrate the splendid remediation performance without secondary pollution. This work is expected to remove multi-HMIs thoroughly and sustainably, which tackles an environmental application challenge.

Selective Capacitive Recovery of Rare-Earth Ions from Wastewater over Phosphorus-Modified TiO2 Cathodes via an Electro-Adsorption Process

Large amounts of wastewater containing low-concentration (<10 ppm) rare-earth ions (REIs) are discharged annually in China's rare-earth mining and processing industry, resulting in severe environmental pollution and economic losses. Hence, achieving efficient selective recovery of low-concentration REIs from REIs-containing wastewater is essential for environmental protection and resource recovery. In this study, a pseudocapacitance system was designed for highly efficient capacitive selective recovery of REIs from wastewater using the titanium dioxide/P/C (TiO2/P/C) composite electrode, which exhibited over 99% recovery efficiency for REIs, such as Eu3+, Dy3+, Tb3+, and Lu3+ in mixed solution. This system maintained high efficiency and more than 90 times the enrichment concentration of REIs even after 100 cycles. Ti4+ of TiO2 was reduced to Ti3+ of Ti3O5 under forward voltage in the system, which trapped the electrons of phosphorus site and caused it to be oxidized to phosphate with a strong affinity for REIs, thus improving the selectivity of REIs. Under reverse voltage, Ti3O5 was oxidized to TiO2, which transferred electrons to phosphate and transformed to the phosphorus site, resulting in the desorption and enrichment of REIs and the regeneration of the electrode. This study provides a promising method for the efficient recovery of REIs from wastewater.

Achieving Exceptional Volumetric Desalination Capacity Using Compact MoS2 Nanolaminates

Capacitive deionization (CDI) has emerged as a promising technology for freshwater recovery from low-salinity brackish water. It is still inapplicable in specific scenarios (e.g., households, islands, or offshore platforms) due to too low volumetric adsorption capacities. In this study, a high-density semi-metallic molybdenum disulfide (1T'-MoS2) electrode with compact architecture obtained by restacking of exfoliated nanosheets, which achieve high capacitance up to ≈277.5 F cm-3 under an ultrahigh scan rate of 1000 mV s-1 with a lower charge-transfer resistance and nearly tenfold higher electrochemical active surface area than the 2H-MoS2 electrode, is reported. Furthermore, 1T'-MoS2 electrode demonstrates exceptional volumetric desalination capacity of 65.1 mgNaCl cm-3 in CDI experiments. Ex situ X-ray diffraction (XRD) reveal that the cation storage mechanism with the dynamic expansion of 1T'-MoS2 interlayer to accommodate cations such as Na+, K+, Ca2+, and Mg2+, which in turn enhances the capacity. Theoretical analysis unveils that 1T' phase is thermodynamically preferable over 2H phase, the ion hydration and channel confinement also play critical role in enhancing ion adsorption. Overall, this work provides a new method to design compact 2D-layered nanolaminates with high-volumetric performance for CDI desalination.

Nitrogen and Sulfur Co-doped Biomass-Derived Porous Carbon Electrodes for Ultra-High-Performance All-Aqueous Thermally Regenerative Flow Batteries

Developing high-performance electrodes for the all-aqueous thermally regenerative ammonia battery (ATRB) system, serving as superior substitutes for commercial carbon cloth electrodes, is anticipated to enhance performance, yet it lacks effective guidance and research. In this work, theoretical analysis is initially used to evaluate the effective conversion and adsorption capacity of nitrogen and sulfur co-doped carbon with respect to copper ion by density functional theory calculation. On the basis of this concept, the nitrogen and sulfur co-doped biomass-derived porous carbon electrode (DGC) is prepared using natural porous carbon materials and thiourea. Compared with commercial carbon cloth electrodes, ATRB with DGC achieves a significant improvement in maximum power density of 49.2%. Via optimization of the doping conditions, the active sites can be effectively regulated to boost charge transfer at the reaction interface. Furthermore, the rapid charge transfer can match the excellent mass transfer performance, generating an impressive net power density of 847.5 W/m2.

Coordination Confined Silver-Organic Framework for High Performance Electrochemical Deionization

Silver (Ag) is deemed a promising anode material for capacitive deionization (CDI) due to its high theoretical capacity and efficient selectivity to Cl-. However, the strong volume change during the conversion reaction significantly undermines the cycling performance of the Ag electrode. Additionally, achieving well-dispersed Ag in the active matrix is challenging, as Ag electrodes prepared by conventional thermal reduction tend to agglomerate. Herein, the organic linker confinement strategy is proposed, applying metal-organic framework (MOF) chemistry between Ag nodes and organic ligands to construct Ag-based MOF. The uniform dispersion of Ag at the molecular level, confined in the organic matrix, efficiently enhances the utilization of active sites, and strengthens the interfacial stability of Ag. Consequently, the Ag-MOF for the CDI anode exhibits an excellent Cl- removal capacity of 121.52 mg g-1 at 20 mA g-1 in 500 mg L-1 NaCl solution, and a high Ag utilization rate of 60.54%. After 100 cycles, a capacity retention of 96.93% is achieved. Furthermore, the Cl- capture mechanism of Ag-MOF is elucidated through density functional theory (DFT) calculations, ex situ XRD, ex situ Raman and XPS. This ingenious electrode design can offer valuable insights for the development of high-performance conversion electrodes for CDI applications.

Conversion of Phosphogypsum into Porous Calcium Silicate Hydrate for the Removal and Recycling of Pb(II) and Cd(II) from Wastewater

The discharge of lead and cadmium wastewater, along with the pollution caused by phosphogypsum, represents a particularly urgent environmental issue. This study employed a straightforward hydrothermal method to convert phosphogypsum into porous calcium silicate hydrate (P-CSH), which was then used to remove and recover Pb(II) and Cd(II) from wastewater. The adsorption capacities of P-CSH for Pb(II) and Cd(II) were notably high at 989.3 mg/g and 290.3 mg/g, respectively. The adsorption processes adhered to the pseudo-second-order kinetics model and the Langmuir isotherm model. Due to identical adsorption sites on P-CSH for both Pb(II) and Cd(II), competitive interaction occurred when both ions were present simultaneously. Additionally, the adsorption efficacy was minimally impacted by the presence of common coexisting cations in wastewater. The dominant mechanisms for removing Pb(II) and Cd(II) via P-CSH were chemical precipitation and surface complexation. Moreover, the adsorbed heavy metals were efficiently separated and reclaimed from the wastewater through a stepwise desorption process. The primary components of the residue from stepwise desorption were quartz and amorphous SiO2. Following dissolution via pressurized alkaline leaching, this residue could be recycled for synthesizing P-CSH. This research offered a new strategy for the resourceful use of phosphogypsum and heavy metal wastewater.

Efficient heavy metal ion removal by fluorographene nanochannel templated molecular sieve: a molecular dynamics simulation study

Environmental water contamination, particularly by heavy metal ions, has emerged as a worldwide concern due to their non-biodegradable nature and propensity to accumulate in soil and living organisms, posing a significant risk to human health. Therefore, the effective removal of heavy metal ions from wastewater is of utmost importance for both public health and environmental sustainability. In this study, we propose and design a membrane consisting of fluorographene (F-GRA) nanochannels to investigate its heavy metal ion removal capacity through molecular dynamics simulation. Although many previous studies have revealed the good performance of lamellar graphene membranes for desalination, how the zero-charged graphene functionalized by fluorine atoms (fully covered by negative charges) affects the heavy metal ion removal capacity is still unknown. Our F-GRA membrane exhibits an exceptional water permeability accompanied by an ideal heavy metal ion rejection rate. The superior performance of F-GRA membrane in removing heavy metal ions can be attributed to the negative charge of the F-GRA surface, which results in electrostatic attraction to positively charged ions that facilitates the optimal ion capture. Our analysis of the potential of mean force further reveals that water molecule exhibits the lowest free energy barrier relative to ions when passing through the F-GRA channel, indicating that water transport is energetically more favorable than ion. Additional simulations of lamellar graphene membranes show that graphene membranes have higher water permeabilities compared with F-GRA membranes, while robustly compromising the heavy meal ion rejection rates, and thus F-GRA membranes show better performances. Overall, our theoretical research offers a potential design approach of F-GRA membrane for heavy metal ions removal in future industrial wastewater treatment.

Regulating Chemisorption and Electrosorption Activity for Efficient Uptake of Rare Earth Elements in Low Concentration on Oxygen-Doped Molybdenum Disulfide

Recovery of rare earth elements (REEs) with trace amount in environmental applications and nuclear energy is becoming an increasingly urgent issue due to their genotoxicity and important role in society. Here, highly efficient recovery of low-concentration REEs from aqueous solutions by an enhanced chemisorption and electrosorption process of oxygen-doped molybdenum disulfide (O-doped MoS2) electrodes is performed. All REEs could be extremely recovered through a chemisorption and electrosorption coupling (CEC) method, and sorption behaviors were related with their outer-shell electrons. Light, medium, and heavy ((La(III), Gd(III), and Y(III)) rare earth elements were chosen for further investigating the adsorption and recovery performances under low-concentration conditions. Recovery of REEs could approach 100% under a low initial concentration condition where different recovery behaviors occurred with variable chemisorption interactions between REEs and O-doped MoS2. Experimental and theoretical results proved that doping O in MoS2 not only reduced the transfer resistance and improved the electrical double layer thickness of ion storage but also enhanced the chemical interaction of REEs and MoS2. Various outer-shell electrons of REEs performed different surficial chemisorption interactions with exposed sulfur and oxygen atoms of O-doped MoS2. Effects of variants including environmental conditions and operating parameters, such as applied voltage, initial concentration, pH condition, and electrode distance on adsorption capacity and recovery of REEs were examined to optimize the recovery process in order to achieve an ideal selective recovery of REEs. The total desorption of REEs from the O-doped MoS2 electrode was realized within 120 min while the electrode demonstrated a good cycling performance. This work presented a prospective way in establishing a CEC process with a two-dimensional metal sulfide electrode through structure engineering for efficient recovery of REEs within a low concentration range.

Rationally designed calcium carbonate multifunctional trap for contaminants adsorption

Adsorption technology has been widely developed to control environmental pollution, which plays an important role in the sustainable development of modern society. Calcium carbonate (CaCO3) is characterized by its flexible pore design and functional group modification, which meet the high capacity and targeting requirements of adsorption. Therefore, its charm of "small materials for great use" makes it a suitable candidate for adsorption. Firstly, we comprehensively review the research progress of controlled synthesis and surface modification of CaCO3, and its application for adsorbing contaminants from water and air. Then, we systematically examine the structure-effect relationship between CaCO3 adsorbents and contaminants, while also intrinsic mechanism of remarkable capacity and targeted adsorption. Finally, from the perspective of material design and engineering application, we offer insightful discussion on the prospects and challenges of calcium carbonate adsorbents, providing a valuable reference for the further research in this field.

Mn, N co-doped carbon nanospheres for efficient capture of uranium (VI) via capacitive deionization

Heteroatom doping, involving the introduction of atoms with distinct electronegativity into carbon materials, has emerged as an effective approach to optimize their charge distribution. In this study, we designed a strategy to synthesize in-situ Mn, N co-doped carbon nanospheres (Mn-NC) through the polycondensation of 2,6-diaminopyridine and formaldehyde in synchronization with Mn2+ chelation to form Mn-polytriazine precursor, followed by calcination to form carbonaceous solid. Then Mn-NC was fabricated into a capacitive deionization (CDI) electrode for the selective removal of uranium ions (U (VI)), which is commonly found in radioactive water. Interestingly, Mn-NC exhibited good selectivity for UO22+ capture with a demonstrated adsorption capacity of approximately 194 mg/g @1.8 V. The systematic analysis of the adsorption mechanism of UO22+ revealed that N dopants within Mn-NC can coordinate with the U (VI) ions, thereby facilitating the removal process. Our study presents a straightforward and convenient strategy for removing UO22+ ions by harnessing the coordination effect, eliminating the requirement for pore size control.

Capacitive deionization system with ultra-high salt adsorption performance: from lab design to agricultural applications

Capacitive deionization is an emerging water desalination technology for industrial applications. Recent advancements in electrode design and system development have led to the reporting of ultra-high salt adsorption performance, benefiting its potential application in agricultural water treatment at a potentially low cost. In this study, we provide a comprehensive summary of the porous electrode design strategy to achieve ultra-high ion adsorption performance, considering factors such as experimental parameters, chemically tuned material properties, redox chemistry and smart nanoarchitecture for future electrode design. Furthermore, we endeavor to establish a correlation between capacitive deionization (CDI) technology and its applicability in the agricultural sector, specifically concentrating on water treatment with an emphasis on undesirable ions associated with salinity, hardness, and heavy metals, to achieve harmless irrigation. Additionally, to ensure the efficient and cost-effective application of CDI systems in agriculture, a thorough overview of the literature on CDI cost analysis is presented. By addressing these aspects, we anticipate that ultra-high salt adsorption CDI systems hold great promise in future agricultural applications.

Surface redox pseudocapacitance boosting Fe/Fe3C nanoparticles-encapsulated N-doped graphene-like carbon for high-performance capacitive deionization

The practical application of carbon anode in capacitive deionization (CDI) is greatly hindered by their poor adsorption capacity and co-ion effect. Herein, an N-doped graphene-like carbon (NC) decorated with Fe/Fe₃C nanoparticles composite (Fe/Fe₃C@NC) with large specific surface area and plentiful porosity is fabricated via a facile and scalable method, namely sol-gel method combined with Fe-catalyzed carbonization. As expected, it exhibits superior CDI performance as a Cl-storage electrode, with Cl^- adsorption capacity as high as 102.3 mg g^-1 at 1000 mg L^-1 Cl^- concentration and 1.4 V voltage, and a stable capacity of 68.5 mg g^-1 for 60 cycles in 500 mg L^-1 Cl^- concentration and 100 mA g^-1 current density. More importantly, on the basis of electrochemical tests, ex-situ X-ray diffraction, ex-situ X-ray photoelectron spectroscopy (XPS), and XPS analysis with argon ion depth etching, it is revealed that the chlorine storage mechanism of the Fe/Fe₃C@NC electrode is dominated by the surface-related redox pseudocapacitance behavior of Fe²⁺/Fe³⁺ couple occurring on or near the surface, enabling fast and reversible ion storage. This work proposes an economical and environmentally friendly general method for the design and development of high-performance Cl-storage electrodes for CDI, and offers an in-depth insight into the Cl^- storage mechanism of Fe decorated carbon electrodes, further promoting the development of CDI technology.

Enhanced Pseudo-Capacitance Process in Nanoarchitectural Layered Double Hydroxide Nanoarrays Hollow Nanocages for Improved Capacitive Deionization Performance

Layered double hydroxides (LDHs) are perceived as a hopeful capacitive deionization (CDI) faradic electrode for Cl^- insertion due to its tunable composition, excellent anion exchange capacity, and fast redox activity. Nevertheless, the self-stacking and inferior electrical conductivity of the two-dimensional structure of LDH lead to unsatisfactory CDI performance. Herein, the three-dimensional (3D) hollow nanocage structure of CoNi-layered double hydroxide/carbon composites is well designed as a CDI anode by cation etching of the pre-carbonized ZIF-67 template. C/CoNi-LDH has a unique 3D hollow nanocage structure and abundant pore features, which can effectively suppress the self-stacking of LDH sheets and facilitate the transport of ions. Moreover, the introduced amorphous carbon layer can act as a conductive network. When employed as the CDI anode, C/CoNi-LDH exhibited a high Cl^- removal capacity of 60.88 mg g^-1 and a fast Cl^- removal rate of 18.09 mg g^-1 min^-1 at 1.4 V in 1000 mg L^-1 NaCl solution. The mechanism of the Cl^- intercalation pseudo-capacitance reaction of C/CoNi-LDH is revealed by electrochemical kinetic analysis and ex situ characterization. This study provides vital guidance for the design of high-performance electrodes for CDI.

Controlled fabrication of nitrogen-doped porous carbon foam with refined hierarchical architectures for desalination via capacitive deionization

Porous carbon materials have been regarded as a promising alternative to activated carbon for desalination via capacitive deionization (CDI) due to refined architectures and functionalities. However, it is still challenging to obtain a controlled hierarchical pore structure and considerable nitrogen-doped content by convenient method. Herein, nitrogen-doped hierarchical porous carbon foams (NHCFs) with different microstructural features, nitrogen contents and nitrogen species were successfully fabricated via a stepwise pyrolysis carbonization strategy using easily available melamine foam. Due to the synergistic effect of hierarchical porous structure and doped nitrogen, the optimized NHCF sample carbonized at 800℃ (NHCF-800) exhibited a maximum desalination capacity of 30.1 mg g^-1 at the optimal operating parameters (500 mg/L NaCl solution, 1.2 V) and an excellent regeneration performance after 50 continuous adsorption-desorption cycles. Furthermore, density functional theory (DFT) was also conducted to elaborate the disparity of sodium adsorption energy among the nitrogen species for in-depth understanding, and it mainly benefits from the ascendency of the pyrrolic-N and pyridinic-N over the graphitic-N dopant. This work paves the way of rational regulation of nitrogen-doped process and hierarchical porous structure carbon as CDI electrode materials for desalination.

"Blockchain-Like" MIL-101(Cr)/Carbon Black Electrodes for Unprecedented Defluorination by Capacitive Deionization

Metal-organic frameworks (MOF) have attracted extensive attention due to their ultra-high specific surface area and tunable structure, the mechanism of direct utilization for capacitive deionization (CDI) defluorination remains undefined. Here, MIL-101(Cr) with ultra-high specific surface area, high water stability, and open metal sites (OMSs) is prepared by a hydrothermal method for defluorination of CDI. Carbon black is used as a "chain" to connect F-stored in the holes of MIL-101(Cr) (Cr-MOF)as "blocks" to enhance the conductivity and ion storage capacity of MIL-101(Cr)/carbon black electrodes (Cr-MOF electrodes). This simple construction method avoids the process complexity of in situ synthesis and performs better. These easily constructed "blockchain-like" Cr-MOF electrodes exhibit excellent defluorination capacity (39.84 mg_NaF g_electrodes ^-1 ), low energy consumption (1.2 kWh kg_NaF ^-1 ), and good stability. The coupling of the electrochemical redox reaction of Cr³⁺ /Cr⁴⁺ with confined water is investigated using in situ and ex situ analysis methods combined with density functional theory (DFT), resulting in an unprecedented defluorination mechanism for Cr-MOF electrodes. This study opens up new ideas for the application of MOF in CDI, clarifies the removal mechanism of MOF, and lays a foundation for further promoting the application of raw materials with poor conductivity in the field of CDI.

Electrosorption performance on graphene-based materials: a review

Due to its unique advantages such as flexible planar structure, ultrahigh specific surface area, superior electrical conductivity and electrical double-layer capacitance in theory, graphene has unparalleled virtues compared with other carbon materials. This review summarizes the recent research progress of various graphene-based electrodes on ion electrosorption fields, especially for water desalination utilizing capacitive deionization (CDI) technology. We present the latest advances of graphene-based electrodes, such as 3D graphene, graphene/metal oxide (MO) composites, graphene/carbon composites, heteroatom-doped graphene and graphene/polymer composites. Furthermore, a brief outlook on the challenges and future possible developments in the electrosorption area are also addressed for researchers to design graphene-based electrodes towards practical application.

Integrating anodic sulfate activation with cathodic H2O2 production/activation to generate the sulfate and hydroxyl radicals for the degradation of emerging organic contaminants

Conventional electrocatalytic degradation of pollutants involves either cathodic reduction or anodic oxidation process, which caused the low energy utilization efficiency. In this study, we successfully couple the anodic activation of sulfates with the cathodic H₂O₂ production/activation to boost the generation of sulfate radical (SO₄^·-) and hydroxyl radical (·OH) for the efficient degradation of emerging contaminants. The electrocatalysis reactor is composed of a modified-graphite-felt (GF) cathode, in-situ prepared by the carbonization of polyaniline (PANI) electrodeposited on a GF substrate, and a boron-doped diamond (BDD) anode. In the presence of sulfates, the electrocatalysis system shows superior activities towards the degradation of pharmaceutical and personal care products (PPCPs), with the optimal performance of completely degrading the representative pollutant carbamazepine (CBZ, 0.2 mg L^-1) within 150 s. Radicals quenching experiments indicated that ·OH and SO₄^·- act as the main reactive oxygen species for CBZ decomposition. Results from the electron paramagnetic resonance (EPR) and chronoamperometry studies verified that the sulfate ions were oxidized to SO₄^·-radicals at the anode, while the dissolve oxygen molecules were reduced to H₂O₂ molecules which were further activated to produce ·OH radicals at the cathode. It was also found that during the catalytic reactions SO₄^·-radicals could spontaneously convert into peroxydisulfate (PDS) which were subsequently reduced back to SO₄^·-at the cathodes. The quasi-steady-state concentrations of ·OH and SO₄^·-were estimated to be 0.51×10^-12 M and 0.56×10^-12 M, respectively. This study provides insight into the synergistic generation of ·OH/SO₄^·- from the integrated electrochemical anode oxidation of sulfate and cathode reduction of dissolved oxygen, which indicates a potential practical approach to efficiently degrade the emerging organic water contaminants.

Ion Exchange Conversion of Na-Birnessite to Mg-Buserite for Enhanced and Preferential Cu2+ Removal via Hybrid Capacitive Deionization

Layered manganese oxides (LMOs) have recently been demonstrated to be one of the most promising redox-active material platforms for electrochemical removal of heavy metal ions from solution via capacitive deionization (CDI). However, the impact of interlayer spacing of LMOs on the deionization performance of electrodes in a hybrid capacitive deionization (HCDI) system with an LMO cathode and a carbon anode (i.e., LMO/C electrodes), and their phase transformation behaviors, particularly during the desalination operations, have yet to be extensively evaluated. In this study, we thoroughly evaluate Mg-buserite obtained by ion exchange of fresh Na-birnessite and Na- and K-birnessite as HCDI electrodes to remove copper ions (Cu²⁺) from saline solutions. Among the three LMO/C electrodes, the Mg-buserite/C (MgB/C) electrodes demonstrate the best deionization performance in terms of salt adsorption capacity (SAC), electrosorption rate, and cycling stability, followed by K-birnessite/C (KB/C) and Na-birnessite/C (NaB/C). More importantly, MgB/C exhibits the highest Cu²⁺ ion adsorption capacity (IAC) of 89.3 mg Cu²⁺ per gram electrode materials at a cell voltage of 1.2 V in 500 mg L^-1 CuCl₂ solution, with an IAC retention as high as 96.3% after 60 charge/discharge cycles. Given that electrosorption of Cu²⁺ ions is often competed by alkali and alkaline earth metal ions, our data reveal that the MgB/C electrodes demonstrate selectivities of 4.7, 7.7, and 8.1 for Cu²⁺ over Na⁺, Ca²⁺, and Mg²⁺, respectively. Moreover, X-ray diffraction and spectroscopic analyses show that the enhanced deionization performance and preference for Cu²⁺ are mainly attributed to the expanded interlayer spacing of LMO minerals. This study provides a promising strategy for tailoring LMO minerals for improving their electrosorption capacity and preference for copper ions from a multivalent-ion solution via an HCDI platform.

Constructing titanium carbide MXene/reduced graphene oxide superlattice heterostructure via electrostatic self-assembly for high-performance capacitive deionization

Capacitive deionization has attracted wide concern on accountof its high energy efficiency, low manufacturing cost and environmental friendliness. Nevertheless, the development of capacitive deionization is still impeded because of the scarcity of suitable electrode materials with superior performance. Herein, we successfully prepared the two-dimensional (2D) titanium carbide (Ti₃C₂T_x) MXene/ reduced graphene oxide (rGO) superlattice heterostructure by a facile electrostatic self-assembly strategy and systematically investigated its performance as capacitive deionized electrode materials. The unique 2D/2D superlattice heterostructure not only effectively alleviates the self-stacking problem of Ti₃C₂T_x MXene nanosheets, but also endows the heterostructure with superior conductivity and fast ion diffusion rate. As a result, the MXene/rGO superlattice heterostructure exhibits an outstanding salt (Na⁺) adsorption capacity (48 mg g^-1) at 1.2 V significantly superior to pristine Ti₃C₂T_x MXene nanosheets, along with outstanding long-term cycling performance. Furthermore, the mechanism involved was elucidated through comprehensive characterizations. Therefore, this study offers a new pathway for designing high-performance electrode materials for capacitive deionization.

Carbon Nanoarchitectonics with Bi Nanoparticle Encapsulation for Improved Electrochemical Deionization Performance

Electrochemical deionization (EDI) is hopefully the next generation of water treatment technology. Bismuth (Bi) is a promising anode material for EDI, due to its high capacity and selectivity toward Cl^-, but the large volume expansion and severe pulverization aggressively attenuated the EDI cycling performance of Bi electrodes. Herein, carbon-layer-encapsulated nano-Bi composites (Bi@C) were prepared by a simple pyrolysis method using a Bi-based metal-organic framework as a precursor. Bi nanoparticles are uniformly coated within the carbon layer, in which the Bi-O-C bond enhances the interaction between Bi and C. Such a structure effectively relieves the stress caused by volume expansion by the encapsulation effect of the carbon layer. Moreover, the introduction of a carbon skeleton provides a conductive network. As a consequence, the Bi@C composite delivered excellent electrochemical performance with a capacity of 537.6 F g^-1 at 1 mV s^-1. The Cl^- removal capacity was up to 133.5 mg g^-1 at 20 mA g^-1 in 500 mg L^-1 NaCl solution. After 100 cycles, the Bi@C electrode still maintains 71.8% of its initial capacity, which is much higher than the 26.3% of the pure Bi electrode. This study provides a promising strategy for improving EDI electrode materials.

Potential Oscillated Electrochemical Metal Recovery System with Improved Conversion Kinetics and High Levelized Quality

Electrodeposition, which is an eco-friendly process with high efficiency, is one of the most promising technologies for metal recovery. However, the kinetics are often limited by the polarization and uncontrollable quality of deposits during the electrodeposition process, which restrict the efficiency and controllability of metal recovery. To ameliorate the limitations of the deposition rate and as-formed deposit quality, transient electrodeposition was introduced to control the microinterfacial reaction by regulating the relationship between charge and mass transfer. The Cu²⁺ removal efficiency and kinetic coefficient during 1 kHz transient electrodeposition were 17.4 and 17.7% higher than those under the conventional steady electric stimulus, respectively. Based on the combined results of X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDS), it was found that the chemical composition of the deposits from transient electrodeposition was more homogenous, as indicated by the low content of metal oxides. The in situ Raman spectra explained the homogenous composition based on the weak interaction of the electrode with the anions during the transient electrodeposition, which was mainly due to the enhanced dehydration under the oscillating or alternating electric field. The potential oscillation induced by the transient electric field also facilitated dehydration, charge transport, and mass transfer, which led to rapid and high-quality metal recovery. Transient electrodeposition will have a great guidance value in the field of metal electroplating and heavy metal recovery from wastewater by electrodeposition.

Adsorption Performance of Amino Functionalized Magnetic Molecular Sieve Adsorbent for Effective Removal of Lead Ion from Aqueous Solution

Lead ion (Pb²⁺) has high toxicity and brings great harm to human body. It is very important to find an effective method to address lead ion pollution. In this work, amino functionalized CoFe₂O₄/SBA–15 nanocomposite (NH₂–CoFe₂O₄/SBA–15) was prepared for the effective removal of Pb²⁺ from aqueous solution. The prepared NH₂–CoFe₂O₄/SBA–15 adsorbent was manifested by using scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectrum (FTIR), X-ray powder diffraction (XRD), and Brunauer-Emmett-Teller (BET) analysis. In the meantime, the adsorption conditions, including pH, adsorbent dosage, and adsorption time, were studied. The investigation of adsorption kinetics revealed that the adsorption results conform to the pseudo-first-order kinetic model. The adsorption isotherms research displayed that the adsorption was consistent with the Freundlich model, demonstrating that the adsorption for Pb²⁺ with the prepared adsorbent was a multimolecular layer adsorption process. In addition, the thermodynamic investigations (ΔG < 0, ΔH > 0, ΔS > 0) demonstrated that the adsorption for Pb²⁺ with the prepared adsorbent was endothermic and spontaneous. Moreover, the prepared adsorbent showed superior anti-interference performance and reusability, implying the potential application of the adsorbent in actual water treatment. Furthermore, this research may provide a reference and basis for the study of other heavy metal ions.