Mo Vacancy-Mediated Activation of Peroxymonosulfate for Ultrafast Micropollutant Removal Using an Electrified MXene Filter Functionalized with Fe Single Atoms

State-Of-The-Art Structural Regulation Methods and Quantum Chemistry for Carbon-Based Single-Atom Catalysts in Advanced Oxidation Process: Critical Perspectives into Molecular Level

Advanced oxidation processes (AOPs) by carbon-based single-atom catalysts (SACs) are recognized as an attractive scientific frontier for water treatment, with the outstanding benefits of ultra-effective and anti-interference capability. However, most of the research has paid more attention to the performance of SACs, while the in-depth understanding of catalytic regulation by molecular interaction is relatively deficient. This critical review delves into deciphering the catalytic mechanism through a micro-level, which makes it more convenient to interpret apparent catalytic phenomena. It first summarizes basic theories of quantum chemistry, which provide mechanism interpretation and prediction for molecular-oxidation systems. Additionally, corresponding oxidation pathways of common oxidants are underscored. Following the oxidants, state-of-the-art regulation methods are discussed with special attention to involved molecular interactions and pollutants. Particularly, the preliminary insights into the "oxidant-catalyst-pollutants" internal relationships are provided to help construct the SAC-AOP system from a molecular standpoint. Meanwhile, some cutting-edge laboratory devices and pilot-scale engineering are presented to illustrate the ultimate purpose of scientific molecular exploration. Eventually, relative challenges of SACs-AOPs upon the design of catalytic systems and investigation methods are provided. This review aims to promote the large-scale potential of SACs-based AOPs in practical water treatment by emphasizing the pivotal role of micro-insights.

Efficient activation of peroxymonosulfate by Mo2TiC2Tx@Co for sustained emerging micropollutant removal: Mo vacancy-mediated activation in Fenton-like reactions

Developing advanced heterogeneous catalysts through structural modifications effectively enhances the catalytic activity of non-homogeneous catalysts for removing emerging micropollutants (EMPs). In this study, Mo2TiC2Tx@Co with Mo vacancies was synthesized using the Lewis molten salt method, which efficiently activates peroxymonosulfate (PMS) and continuously degrades EMPs in water. The abundant Mo vacancy structure in the material acts as an anchoring site for Co nanoparticles and a co-catalytic site for Fenton-like reactions, enabling PMS adsorption and activation. Furthermore, Mo facilitates the redox cycling of Co3+/Co2+ through electron transfer. Mo vacancy-mediated activation in Fenton-like reactions enabled the Mo2TiC2Tx@Co/PMS system to achieve superior degradation efficiency for sulfamethoxazole (SMX) and several other EMPs, with the SMX degradation rate being 52.7 times higher than that of the Mo2TiAlC2/PMS system. The system exhibited robust resistance to various anionic species and maintained high activity over a wide pH range. The Mo2TiC2Tx@Co /PMS system degrades EMPs in water through both free radical (SO4•- and •OH) and non-radical (1O2) mechanisms, enhancing EMPs removal from complex water environments. This study aims to develop an efficient and sustainable heterogeneous catalyst, offering a viable solution for the long-term and effective degradation of EMPs in water.

Innovative asymmetric CoSA-N-Ti3C2Tx catalysis: unleashing superoxide radicals for rapid self-coupling removal of phenolic pollutant

The polymerization pathway of contaminants rivals the traditional mineralization pathway in water purification technologies. However, designing suitable oxidative environments to steer contaminants toward polymerization remains challenging. This study introduces a nitrogen-oxygen double coordination strategy to create an asymmetrical microenvironment for Co atoms on Ti3C2Tx MXenes, resulting in a novel Co-N2O3 microcellular structure that efficiently activates peroxymonosulfate. This unique activation capability led to the complete removal of various phenolic pollutants within 3 min, outperforming the representative Co single-atom catalysts reported in the past three years. Identifying and recognizing reactive oxygen species highlight the crucial role of ⋅O2 -. The efficient pollutant removal occurs through a ⋅O2 --mediated radical pathway, functioning as a self-coupling reaction rather than deep oxidation. Theoretical calculations demonstrate that the electron-rich pollutants transfer more electrons to the catalyst surface, inducing the reduction of dissolved oxygen to ⋅O2 - in the Co-N2O3 microregion. In a practical continuous flow-through application, the system achieved 100 % acetaminophen removal efficiency in 6.5 h, with a hydraulic retention time of just 0.98 s. This study provides new insights into the previously underappreciated role of ⋅O2 - in pollutant purification, offering a simple strategy for advancing aggregation removal technology in the field of wastewater treatment.

Controllable Supply-Demand Effect during Superior Fe Single-Atom Catalyst Synthesis for Targeted Guanine Oxidation of Antibiotic Resistance Genes

Nonradical Fenton-like catalysis offers an opportunity to degrade extracellular antibiotic resistance genes (eARGs). However, high-loading single-atom catalysts (SACs) with controllable configurations are urgently required to selectively generate high-yield nonradicals. Herein, we constructed high-loading Fe SACs (5.4-34.2 wt %) with uniform Fe-N4 sites via an optimized coordination balance of supermolecular assembly for peroxymonosulfate activation. The selectivity of singlet oxygen (1O2) generation and its contribution to eARGs degradation were both >98%. This targeting strategy of oxidizing guanines with low ionization potentials by 1O2 allowed 7 log eARGs degradation within 10 min and eliminated their transformation within 2 min, outperforming most reported advanced oxidation processes. Relevant interactions between 1O2 and guanines were revealed at a single-molecule resolution. The high-loading Fe SACs exhibited excellent universality and stability for different eARGs and water matrices. These findings provide a promising route for constructing high-loading SACs for efficient and selective Fenton-like water treatment.

Simultaneous degradation of organoarsenic and immobilization of arsenate by an electroactive CuFe2O4-CNT/peroxymonosulfate platform: Insights into the distinct roles of the Cu and Fe sites

Phenylarsonic acid (PAA) compounds, widely used in animal husbandry, pose a considerable environmental threat owing to their potential transformation into toxic inorganic arsenic species. To efficiently decontaminate PAA and adsorb secondary As(V), a hybrid CuFe2O4-modified carbon nanotube (CuFe2O4-CNT) filter was developed in this study. The hybrid CuFe2O4-CNT filter functioned as an effective catalyst, convective filtration medium, electrode, and adsorbent. Moreover, it removed 97 % PAA within 80 min in circulation mode under optimal conditions (25 °C, pH0 = 7, peroxymonosulfate [PMS] = 1.5 mM, and voltage = 1.0 V), with a total As removal efficiency of 94 %. Experimental and theoretical studies showed that the (100) and (211) planes of CuFe2O4-CNT contributed to PMS activation and As(V) adsorption, respectively. Quantum chemical calculations and high-performance liquid chromatography-mass spectrometry analysis determined the energy barriers for reactions between the transient state and SO4•- and HO•, based on which potential PAA degradation pathways were proposed. Additionally, the negligible loss of efficiency in practical water samples and acceptable leached metal ion concentrations (Cu < 0.1 mg/L and Fe < 0.15 mg/L) confirmed the reusability and stability of the filter. This study provides a promising strategy for organoarsenic decontamination by combining electrocatalytic PMS oxidation and filtration techniques.

Constructing Tandem Fenton-like Reaction Systems Based on Structure Adaption to Boost Water Contaminant Mineralization Efficiency

Mineralization of emerging contaminants by using advanced oxidation processes (AOPs) is a desirable option to ensure water safety, but still challenged by the excessive chemical and/or energy input. Here, we conceptually proposed the tandem reaction system (TRS) of different reactive oxygen species (ROS) based on structure adaption of target contaminants. To construct a model TRS, we first realized highly selective generation of three classical ROS (1O2, HO⋅ and SO4⋅-) by peroxymonosulfate activation in an electrochemical Fenton-like system, where three replaceable Fe-centered cathodes were rationally designed as electronic mediator. The 1O2+SO4⋅--TRS exhibited nearly 100 % mineralization of sulfamethoxazole (SMX), whereas only 34.2 %, 56.2 % and 60.8 % for each of the single 1O2/HO⋅/SO4⋅--AOP systems. Mechanism exploration of SMX degradation in TRS evidenced that the initial reaction with 1O2 selectively destructed the sulfonamide bridge of SMX to form p-aminobenzenesulfonic acid, which will be vulnerable to sequent SO4⋅- attack to facilitate mineralization. Successful extendibility of 1O2+SO4⋅--TRS to other sulfonamide antibiotics and 1O2+HO⋅-TRS to phenolic and arylcarboxylic compounds, as well as the demonstration of 1O2+SO4⋅--TRS in treatment of three actual pharmaceutical wastewaters strongly support that TRS is a powerful and sustainable strategy to enhance the mineralization of emerging contaminants in water.

Selective degradation of sulfonamide antibiotics by peracetic acid alone: Direct oxidation and radical mechanisms

In this study, a peracetic acid (PAA) alone process was systematically demonstrated to give a high efficiency in the selective degradation of sulfonamide antibiotics (SAs). The employment of scavengers and probe compounds in this process demonstrates the predominant role of PAA in direct oxidation, and the limited role of carbon-centered radicals (R-O•) in the degradation of representative SA, sulfamethazine (SMT). The process also exhibits high tolerance towards solution pH and competing anions in wastewater, indicating its applicability in enhancing the biodegradation of SAs in wastewater. Furthermore, the relationships between the observed rate constants (kobs) and the molecule descriptors for ten SA compounds are demonstrated through the assessment of structure-activity relationships, calculated from density functional theory (DFT). This study gives new insights into the selectivity, performance and mechanism of PAA direct-oxidation in SA degradation.

Electrochemically Assisted Cobalt/MXene Membrane for Effective Water Treatment: Synchronously Improving Catalytic Performance and Anti-Interference Ability

Catalytic membrane technology for water treatment is often constrained by a trade-off between permeability and catalytic efficiency as well as interference from coexisting anions and organic matter in natural water matrices. Herein, a novel cobalt-loaded MXene (Co/MXene) 2D membrane with good hydrophilicity, electrical conductivity, and PMS activation function is constructed. The negative voltage is exerted on the membrane to significantly enhance its PMS activation efficiency and anti-interference capacity toward effective water treatment. Under -2 V, the optimal Co/MXene catalytic membrane displays 100% rhodamine b (RhB) removal within a residence time of only 1.1 s, whose RhB degradation kinetic constant (k of 6.85 s-1) is 17.6 times higher than that of the Co/MXene catalytic membrane alone and is also greatly superior to other advanced catalysts and catalytic membranes. Meanwhile, the catalytic membrane displays obvious anti-interference ability in the presence of various coexisting substances of the water matrix and performs well in treating the secondary effluent of coking wastewater. The radical-dominated (SO4•- and •OH) mechanism accompanied by the nonradical species (1O2 and Co(VI)═O) is revealed in the system, and the reactive species production is obviously enhanced under negative voltage. Experimental results and theoretical calculations jointly confirm the key role of electrochemical assistance in enhancing membrane performance, which not only facilitates cycling of Co3+/Co2+ for enhanced PMS activation via improving PMS adsorption and promoting charge transfer from Co to PMS but also hinders interference from coexisting substances in water via electrostatic repulsion.

Kinetics and mechanisms of non-radically and radically induced degradation of bisphenol A in a peroxymonosulfate-chloride system

Bisphenol A, a hazardous endocrine disruptor, poses significant environmental and human health threats, demanding efficient removal approaches. Traditional biological methods struggle to treat BPA wastewater with high chloride (Cl-) levels due to the toxicity of high Cl- to microorganisms. While persulfate-based advanced oxidation processes (PS-AOPs) have shown promise in removing BPA from high Cl- wastewater, their widespread application is always limited by the high energy and chemical usage costs. Here we show that peroxymonosulfate (PMS) degrades BPA in situ under high Cl- concentrations. BPA was completely removed in 30 min with 0.3 mM PMS and 60 mM Cl-. Non-radical reactive species, notably free chlorine species, including dissolved Cl2(l), HClO, and ClO- dominate the removal of BPA at temperatures ranging from 15 to 60 °C. Besides, free radicals, including •OH and Cl2 •-, contribute minimally to BPA removal at 60 °C. Based on the elementary kinetic models, the production rate constant of Cl2(l) (32.5 M-1 s-1) is much higher than HClO (6.5 × 10-4 M-1 s-1), and its degradation rate with BPA (2 × 107 M-1 s-1) is also much faster than HClO (18 M-1 s-1). Furthermore, the degradation of BPA by Cl2(l) and HClO were enlarged by 10- and 18-fold at 60 °C compared to room temperature, suggesting waste heat utilization can enhance treatment performance. Overall, this research provides valuable insights into the effectiveness of direct PMS introduction for removing organic micropollutants from high Cl- wastewater. It further underscores the critical kinetics and mechanisms within the PMS/Cl⁻ system, presenting a cost-effective and environmentally sustainable alternative for wastewater treatment.

Selective oxidation behavior based on iron-doped MOF derived carbon-based catalysts: Active site regulation and degradation mechanism analysis

Selective removal of target organic pollutants in complex water quality of municipal sewage is extremely important for the deep treatment of water quality. Here, energetic MOF and Fe-MOF are doped in electrostatic spinning process to adjust the structure and composition of the catalysts, active oxygen species (ROSs), realizing the selective removal of organic pollutants. Non-azo and azo pollutants are selected as target pollutants. Catalysts PCFe-8 with Fe nanoclusters, EPCFe-8 with Fe-Nx, and EPC-8 without Fe doping are used to activate peroxymonosulfate (PMS) for degrading pollutants. The results show that the PCFe-8/PMS system can produce the most SO4- and exhibit superior removal of azo pollutants, whereas the degradation behavior of non-azo pollutants is more inclined to occur in the EPCFe-8/PMS system and the EPC-8/PMS system. This work provides a reference for elucidating the relationship between catalyst structure and components, types of ROSs, and selective degradation of pollutants.

Bioinspired axial S-coordinated single-atom cobalt catalyst to efficient activate peroxymonosulfate for selective high-valent Co-Oxo species generation

The efficient activation and selective high-valent metal-oxo (HVMO) species generation remain challenging for peroxymonosulfate (PMS)-based advanced oxidation processes (PMS-AOPs) in water purification. The underlying mechanism of the activation pathway is ambiguous, leading to a massive dilemma in the control and regulation of HVMO species generation. Herein, bioinspired by the bio-oxidase structure of cytochrome P450, the axial coordination strategy was adopted to tailor a single-atom cobalt catalyst (CoN4S-CB) with an axial S coordination. CoN4S-CB high-selectively generated high-valent Co-Oxo species (Co(IV)=O) via PMS activation. Co(IV)=O demonstrated an ingenious oxygen atom transfer (OAT) reaction to achieve the efficient degradation of sulfamethoxazole (SMX), and this allowed robust operation in various complex environments. The axial S coordination modulated the 3d orbital electron distribution of the Co atom. Density functional theory (DFT) calculation revealed that the axial S coordination decreased the energy barrier for PMS desorption and lowered the free energy change (ΔG) for Co(IV)=O generation. CoN4S-PMS* had a narrow d-band close to the Fermi level, which enhanced charge transfer to accelerate the cleavage of O-O and O-H bonds in PMS. This work provides a broader perspective on the activator design with natural enzyme structure-like active sites to efficient activate PMS for selective HVMO species generation.

Comparative study on the activation of peroxymonosulfate and peroxydisulfate by Ar plasma-etching CNTs for sulfamethoxazole degradation: Efficiency and mechanisms

Sulfamethoxazole (SMX), a widely utilized antibiotic, was continually detected in the environment, causing serious risks to aquatic ecology and water security. In this study, carbon nanotubes (CNTs) with abundant defects were developed by argon plasma-etching technology to enhance the activation of persulfate (PS, including peroxymonosulfate (PMS) and peroxydisulfate (PDS)) for SMX degradation while reducing environmental toxicity. Obviously, the increase of ID/IG value from 0.980 to 1.333 indicated that Ar plasma-etching successfully introduced rich defects into CNTs. Of note, Ar-90-CNT, whose Ar plasma-etching time was 90 min with optimum catalytic performance, exhibited a significant discrepancy between PMS activation and PDS activation. Interestingly, though the Ar-90-CNT/PDS system (kobs = 0.0332 min-1) was more efficient in SMX elimination than the Ar-90-CNT/PMS system (kobs = 0.0190 min-1), Ar plasma-etching treatment had no discernible enhancement in the catalytic efficiency of MWCNT for PDS activation. Then the discrepancy on activation mechanism between PMS and PDS was methodically investigated through quenching experiments, electron spin resonance (ESR), chemical probes, electrochemical measurements and theoretical calculations, and the findings unraveled that the created vacancy defects were the ruling active sites for the production of dominated singlet oxygen (1O2) in the Ar-90-CNT/PMS system to degrade SMX, while the electron transfer pathway (ETP), originated from PDS activation by the inherent edge defects, was the central pathway for SMX removal in the Ar-90-CNT/PDS system. Based on the toxicity test of Microcystis aeruginosa, the Ar-90-CNT/PDS system was more effective in alleviating environmental toxicity during SMX degradation. These findings not only provide insights into the discrepancy between PMS activation and PDS activation via carbon-based materials with controlled defects regulated by the plasma-etching strategy, but also efficiently degrade sulfonamide antibiotics and reduce the toxicity of their products.

Emerging single-atom catalysts in the detection and purification of contaminated gases

Single atom catalysts (SACs) show exceptional molecular adsorption and electron transfer capabilities owing to their remarkable atomic efficiency and tunable electronic structure, thereby providing promising solutions for diverse important processes including photocatalysis, electrocatalysis, thermal catalysis, etc. Consequently, SACs hold great potential in the detection and degradation of pollutants present in contaminated gases. Over the past few years, SACs have made remarkable achievements in the field of contaminated gas detection and purification. In this review, we first provide a concise introduction to the significance and urgency of gas detection and pollutant purification, followed by a comprehensive overview of the structural feature identification methods for SACs. Subsequently, we systematically summarize the three key properties of SACs for detecting contaminated gases and discuss the research progress made in utilizing SACs to purify polluted gases. Finally, we analyze the enhancement mechanism and advantages of SACs in polluted gas detection and purification, and propose strategies to address challenges and expedite the development of SACs in polluted gas detection and purification.

Selective Phosphate Adsorption Using Topologically Regulated Binary-Defect Metal-Organic Frameworks: Essential Role of Interfacial Electron Mobility

Metal-organic framework (MOF)-modified biochars (BC) have gained recognition as potent adsorbents for phosphate. However, essential insights into the electronic interfacial state of the MOFs remain lacking. In this study, we propose a novel topological transformation strategy to directionally regulate the interfacial electronic states of BC/MOFs composites. The optimized BC/MOFs exhibited an excellent selective phosphate adsorption capacity of 188.68 mg·g-1, coupled with rapid sorption kinetics of 6.81 mg·(g·min0.5)-1 in simulated P-laden wastewater. When challenged with real bioeffluent, such efficacy was still maintained (5 mg·L-1, 25.92 mg·g-1). This superior performance was due to the Fe(III) → Fe(II) transition, promoting electron mobility and leading to the anchoring of Mg(II) to form specific coordination unsaturated sites (Mg-CUS) for phosphate adsorption. Importantly, the simultaneous regulation of binary defects further enhances electron mobility, resulting in the formation of sp3 unequal hybrid orbitals with a stronger internal coupling capability between Mg 3s in Mg-CUS and O 2p in phosphate. Furthermore, the high electron affinity of Mg effectively promotes electron cycling, endowing BC/MOFs with a distinct self-healing capability to facilitate phosphate desorption. The outcomes of this study provide novel perspectives for electronic regulated phosphate adsorption.

Electric field-enhanced heterogeneous catalytic ozonation (EHCO) process for sulfadiazine removal: The role of cathodic reduction

In this work, an electric field-enhanced heterogeneous catalytic ozonation (EHCO) was systematically investigated using a prepared FeOx/PAC catalyst. The EHCO process exhibited high sulfadiazine (SDZ) and TOC removal efficiency compared with electrocatalysis (EC) and heterogeneous catalytic ozonation (HCO) process. Almost 100% of SDZ was removed within 2 min, and the TOC removal reached approximately 85% within 60 min. Quenching experiments and EPR analysis suggested that the prominent SDZ and TOC removal performance is supported by the enhanced ·OH generation ability. Further study proved that H2O2 formed by O2 electrochemical reduction, peroxone reaction and electrochemical reduction of ozone contributed to improving ·OH generation. Furthermore, the EHCO system showed satisfactory stability and recyclability compared to conventional HCO systems, and the SDZ and TOC removal rates were maintained at ≥95% and ≥70% in 16 consecutive recycles, respectively. Meanwhile, XPS analysis and Boehm's titration for the FeOx/PAC catalyst used in HCO and EHCO process confirmed that the external electron supply could restrain the oxidation of surface functional groups of PAC and maintain a balance of the Fe(II)/Fe(III) ratio, which proved the critical role of cathode reduction in catalyst in situ regeneration during long consecutive recycles. In addition, the EHCO system could achieve more than 80% SDZ removal within 2 min in different water matrices. These results confirmed that the EHCO process has a wide application perspective for refractory organics removal in actual wastewater.

Membrane-catalysis integrated system for contaminants degradation and membrane fouling mitigation: A review

The integration of catalytic degradation and membrane separation processes not only enables continuous degradation of contaminants but also effectively alleviates inevitable membrane fouling, demonstrating fascinating practical value for efficient water purification. Such membrane-catalysis integrated system (MCIS) has attracted tremendous research interest from scientists in chemical engineering and environmental science recently. In this review, the advantages of MCIS are discussed, including the membrane structure regulation, stable catalyst loading, nano-confinement effect, and efficient natural organic matter (NOM) exclusion, highlighting the synergistic effect between membrane separation and catalytic process. Subsequently, the design considerations for the fabrication of catalytic membranes, including substrate membrane, catalytic material, and fabrication method, are comprehensively summarized. Afterward, the mechanisms and performance of MCIS based on different catalytic types, including liquid-phase oxidants/reductants involved MCIS, gas involved MCIS, photocatalysis involved MCIS, and electrocatalysis involved MCIS are reviewed in detail. Finally, the research direction and future perspectives of catalytic membranes for water purification are proposed. The current review provides an in-depth understanding of the design of catalytic membranes and facilitates their further development for practical applications in efficient water purification.

Flow-through electrochemical organophosphorus degradation and phosphorus recovery: The essential role of chlorine radical

Phosphorus scarcity and the deleterious ecological impact of the release of organophosphorus pesticides have emerged as critical global issues. Previous research has shown the ability of electrochemistry to induce the precipitation of calcium phosphate from phosphorus-laden wastewater to recover the phosphorus. The current study presents a flow-through electrochemical system consisting of a column-shaped electrochemical reactor, a tubular stainless-steel (SS) cathode, and a titanium suboxides (TiSO) anode. This system simultaneously oxidizes tetrakis (hydroxymethyl) phosphonium sulfate (THPS) and recycles phosphates. The influence of current density, flow rate, and initial calcium ions concentration were examined under continuous flow operation. To enhance the electrochemical reactor's performance, we elevated the current density from 5 to 30 mA cm-2, which caused the phosphorus recovery efficiency to increase from 37% to 72% within 120 min, accompanied by an enhancement of the THPS mineralization efficiency from 57% to 90%. These improvements were likely due to the higher yield of reactive species chloride species (Cl•) formed at the TiSO anode and the higher local pH at the cathode. By investigating the formation of Cl• at the TiSO anode, we found that THPS mineralization exceeded 75% in the presence of NaCl at a current density of 20 mA cm-2. The demonstrated performance of the flow-through electrochemical system should enable the utilization of anodic oxidation-cathodic precipitation for the recovery of phosphorus from organophosphorus-contaminated wastewater.

Enhanced and synergistic catalytic activation by photoexcitation driven S-scheme heterojunction hydrogel interface electric field

The regulation of heterogeneous material properties to enhance the peroxymonosulfate (PMS) activation to degrade emerging organic pollutants remains a challenge. To solve this problem, we synthesize S-scheme heterojunction PBA/MoS2@chitosan hydrogel to achieve photoexcitation synergistic PMS activation. The constructed heterojunction photoexcited carriers undergo redox conversion with PMS through S-scheme transfer pathway driven by the directional interface electric field. Multiple synergistic pathways greatly enhance the reactive oxygen species generation, leading to a significant increase in doxycycline degradation rate. Meanwhile, the 3D polymer chain spatial structure of chitosan hydrogel is conducive to rapid PMS capture and electron transport in advanced oxidation process, reducing the use of transition metal activator and limiting the leaching of metal ions. There is reason to believe that the synergistic activation of PMS by S-scheme heterojunction regulated by photoexcitation will provide a new perspective for future material design and research on enhancing heterologous catalysis oxidation process.

Peracetic acid-based electrochemical treatment of sulfamethoxazole and real antibiotic wastewater: Different role of anode and cathode

Although has high oxidation capacity and low toxic by-product formation potential, the feasibility, mechanism, and antibiotic treatment performance of peracetic acid (PAA)-based electrochemical system remains unknown. This work systematically studied the electro-activation process of PAA, and distinguished the different mechanisms of anode and cathode. In the PAA-based electrochemical system, the anode mainly produces BDD(•OH), and the cathode is mainly the R-O• (especially CH3CO3•). These differences lead to different degradation pathway and toxicity evolution of sulfamethoxazole (SMX). The anode transformation products (TPs) show negative toxicity and are difficult to be further removed, while TPs from PAA-dominated cathode posed electron-donating effect and a tapering ecological risk. The BDD(•OH) can well mineralize the TPs produced from cathode. Moreover, the active chlorine produced by the anode can effectively avoid the accumulation of NH4+- N released by antibiotic degradation. In an undivided cell, PAA-based treatment for real antibiotic wastewater achieved 73.9%, 59.4%, 76.9%, and 31.7% of COD, TOC, NH4+- N, and TN removal, respectively. More importantly, when PAA existed in this system, the active chlorine and AOCl accumulation are inhibited (inhibition ratio 83.5% and 82.7%, respectively). This study provides theoretical and technical support for the practical application of PAA-based electrochemical system.

Mechanistic insight into single-atom Fe loaded catalytic membrane with peracetic acid and visible light activation

Advanced oxidation is an effective method for removing hard-to-degrade organic pollutants from water. In this paper, a novel structure of a single atom Fe anchored g-C3N4 (FeCN) membrane was proposed to remove pollutants from water by coupling membrane technology with photocatalytic and peroxyacetic acid oxidation. The presence of zero-dimensional Fe atoms in FeCN membranes allows for the removal of acetaminophen (APAP) in mobile membrane filtration systems without compromising permeation performance by simultaneously possessing visible photocatalytic capability and peroxyacetic acid (PAA) activation. Existence of inter-membrane domain-limiting conditions led to 100 % degradation of APAP within 10.5 ms, which is 5 orders of magnitude faster than conventional catalytic systems. Notably, photo-generated electrons/holes generated by light and HClO generated by Cl- promote the conversion of Fe(V) and the removal of pollutants during the catalytic process. The spatial separation ability of the membrane catalytic layer surface mitigates the catalyst's passivation by macromolecular organics. Furthermore, surface photocatalysis of the membrane and interlayer catalysis generated by PAA mitigate the surface and interlayer pollutants of the membrane, respectively. This study explores a novel approach for the development of highly efficient atom-catalyzed membrane systems with multiple purposes.

Packed OV-SnO2-Sb bead-electrodes for enhanced electrocatalytic oxidation of micropollutants in water

Electrocatalytic oxidation is an appealing treatment option for emerging micropollutants in wastewater, however, the limited reactive surface area and short service lifetime of planar electrodes hinder their industrial applications. This study introduces an innovative electrochemical wastewater treatment technology that employs packed bead-electrodes (PBE) as a dynamic electrocatalytic filter on a dimensionally stable anode (DSA) acting as a current collector. By using PBE, the electroactive volume is expanded beyond the vicinity of the common planar anode to the thick porous media of PBE with a vast electrocatalytic surface area. This greatly enhances the efficiency of electrochemical degradation of micropollutants. The OV-SnO2-Sb PBE filter achieved a nearly 100 % degradation of moxifloxacin (MOX) in under 2 min of single-pass filtration, with a degradation rate over an order of magnitude higher than the conventional electrochemical oxidation processes. The generation of abundant radical species (•OH) and non-radical species (1O2 and O3), along with the enhanced direct oxidation, led to the outstanding performance of the charged PBE system in MOX degradation. The OV-SnO2-Sb PBE was remarkably stable, and the separation between the electroactive PBE layer and the base Ti anode allows for easy renewal of the bead-electrode materials and scaling up of the system for practical applications. Overall, our study presents a dynamic electroactive PBE that advances the electrocatalytic oxidation technology for effective control of emerging pollutants in the water environment. This technology has the potential to revolutionize electrochemical wastewater treatment and contribute to a more sustainable future environment.

Spin state-dependent in-situ photo-Fenton-like transformation from oxygen molecule towards singlet oxygen for selective water decontamination

The development of 1O2-dominanted selective decontamination for water purification was hampered by extra H2O2 consumption and poor 1O2 generation. Herein, we proposed the reconstruction of Fe spin state using near-range N atom and long-range N vacancies to enable efficient generation of H2O2 and sequential activation of H2O2 into 1O2 after visible-light irradiation. Theoretical and experimental results revealed that medium-spin Fe(III) strengthened O2 adsorption, penetrated eg electrons to antibonding p-orbital of oxygen, and lowered the free energy of O2 activation, enabling the oxygen protonation for H2O2 generation. Thereafter, the electrons of H2O2 could be extracted by low-spin Fe(III) and rapidly converted into 1O2 in a nonradical path. The developed 1O2-dominated in-situ photo-Fenton-like system had an excellent pH universality and anti-interference to inorganic ions, dissolved organic matter, and even real water matrixes (e.g., tap water and secondary effluent). This work provided a novel insight for sustainable and efficient 1O2 generation, which motivated the development of new-generation selective water treatment technology.

Kinetics study of chloride-activated peracetic acid for purifying bisphenol A: Role of Cl2/HClO and carbon-centered radicals

Peracetic acid is an emerging oxidant and disinfectant for wastewater purification. In this study, we first developed a comprehensive and accurate model to elucidate the reaction mechanisms and simulate reaction kinetics of peracetic acid (PAA, CH3C(=O)OOH) activated by chloride (Cl-) based on experimental results and literature. A diversity of experiments methods (e.g., quenching experiments, probe compounds degradation, electron paramagnetic resonance (EPR) measurements) and kinetic modeling were used to determine the reactive species. As a result, carbon-centered radicals and free chlorine reactive species (Cl2 and HClO) were devoted to BPA degradation in the PAA/Cl- system. The carbon-centered radicals CH3C(=O)OO•, CH3C(=O)O•, CH3OO•, and •CH3 greatly accelerated BPA degradation with their corresponding kinetics of kCH3C(=O)OO•, BPA = 2 × 108 M-1 s-1, kCH3C(=O)O•, BPA = 2 × 107 M-1 s-1, k•CH3, BPA = 2 × 106 M-1 s-1 and kCH3OO•, BPA = 2 × 104 M-1 s-1. Dissolved Cl2(l) species was also important for BPA degradation with kCl2, BPA of 2 × 107 M-1 s-1, much higher than HClO/ClO- of kHClO, BPA = 1.2 × 101 M-1 s-1 and kClO-, BPA = 9 × 10-3 M-1 s-1. While free chlorine tends to transform BPA to estrogenic chlorinated organic products, the primary degradation of BPA by carbon-centered radicals results in chlorine-free products, reducing the production of disinfection byproducts during the treatment of saline wastewater. This study improves the knowledge of reaction kinetics and mechanism and reactive species generation in the PAA/Cl- system.

Single cobalt atoms anchored on Ti3C2Tx with dual reaction sites for efficient adsorption-degradation of antibiotic resistance genes

The assimilation of antibiotic resistance genes (ARGs) by pathogenic bacteria poses a severe threat to public health. Here, we reported a dual-reaction-site-modified CoSA/Ti3C2Tx (single cobalt atoms immobilized on Ti3C2Tx MXene) for effectively deactivating extracellular ARGs via peroxymonosulfate (PMS) activation. The enhanced removal of ARGs was attributed to the synergistic effect of adsorption (Ti sites) and degradation (Co-O3 sites). The Ti sites on CoSA/Ti3C2Tx nanosheets bound with PO43- on the phosphate skeletons of ARGs via Ti-O-P coordination interactions, achieving excellent adsorption capacity (10.21 × 1010 copies mg-1) for tetA, and the Co-O3 sites activated PMS into surface-bond hydroxyl radicals (•OHsurface), which can quickly attack the backbones and bases of the adsorbed ARGs, resulting in the efficient in situ degradation of ARGs into inactive small molecular organics and NO3. This dual-reaction-site Fenton-like system exhibited ultrahigh extracellular ARG degradation rate (k > 0.9 min-1) and showed the potential for practical wastewater treatment in a membrane filtration process, which provided insights for extracellular ARG removal via catalysts design.

Pulsed versus direct current electrochemical co-catalytic peroxymonosulfate-based system: Elevated degradation and energy efficiency with enhanced oxidation mechanisms

In this work, the pulsed electrochemical (PE) system was investigated to activate peroxymonosulfate (PMS) with the addition of Fe(III) to achieve efficient degradation of sulfamethoxazole (SMX) with reduced energy consumption, in comparison with the direct current (DC) electrochemical system. The operational conditions of PE/PMS/Fe(III) system were optimized as 4 kHz pulse frequency, 50% duty cycle, and pH 3, at which 67.6% reduction of energy consumption and enhanced degradation performance were achieved compared to the DC/PMS/Fe(III) system. Results of electron paramagnetic resonance spectroscopy analysis and quenching and chemical probe experiment revealed the presence of ^•OH, SO₄^•-, and ¹O₂ in the system, with ^•OH being the dominant role. The concentrations of these active species were averagely 15 ± 1% higher in the PE/PMS/Fe(III) system than those of the DC/PMS/Fe(III) system. Identification of SMX byproducts was achieved based on high resolution mass spectrometry analysis to predict the degradation pathways. The SMX byproducts could eventually be eliminated by the PE/PMS/Fe(III) system with extended treatment time. Overall, the PE/PMS/Fe(III) system was demonstrated with high energy and degradation performance, and is appear to be an robust strategy for practical treatment of wastewater.

Ecotoxicity and resistance genes induction changing of antibiotic tetracycline degradation products dominated by differential free radicals

Studying the ecological risks of antibiotics and their degradation products is of great importance to water environment security and advanced oxidation processes (AOPs) development. This work studied the changes and internal influencing mechanisms of ecotoxicity and the capacity for inducing antibiotic resistance genes (ARGs) shown by the tetracycline (TC) degradation products generated in AOPs with differential free radicals. Under the action of superoxide radicals and singlet oxygen in the ozone system, and sulfate and hydroxyl radicals in the thermally activated potassium persulfate system, TC exhibited differential degradation pathways and resulted in the differential growth inhibition trends on the determined strains. Microcosm experiments combined with metagenomics were also performed to analyze the remarkable changes in the TC resistance genes tetA (60), tetT, and otr(B) induced by the degradation products and ARG hosts in the natural water environment. Microcosm experiments exhibited that the microbial community in actual water have changed significantly with the addition of TC and degradation intermediates. Furthermore, the richness of genes related to oxidative stress was investigated to discuss the effect on reactive oxygen species production and SOS response caused by TC and its intermediates.

Copper Nanowire Networks: An Effective Electrochemical Peroxymonosulfate Activator toward Nitrogenous Pollutant Abatement

Herein, we developed an electrochemical filtration system for effective and selective abatement of nitrogenous organic pollutants via peroxymonosulfate (PMS) activation. Highly conductive and porous copper nanowire (CuNW) networks were constructed to serve simultaneously as catalyst, electrode, and filtration media. In one demonstration of the CuNW network's capability, a single pass through a CuNW filter (τ < 2 s) degraded 94.8% of sulfamethoxazole (SMX) at an applied potential of -0.4 V vs SHE. The exposed {111} crystal plane of CuNW triggered atomic hydrogen (H*) generation on sites, which contributed to effective PMS reduction. Meanwhile, with the involvement of SMX, a Cu-N bond was formed by the interactions between the -NH₂ group of SMX and the Cu sites of CuNW, accompanied by the redox cycling of Cu²⁺/Cu⁺, which was facilitated by the applied potential. The different charges of the active Cu sites made it easier to withdraw electrons and promote PMS oxidation. Theoretical calculations and experimental results were combined to suggest a mechanism for pollution abatement with CuNW networks. The results showed that system efficacy for the degradation of a wide array of nitrogenous pollutants was robust across a broad range of solution pH and complex aqueous matrices. The flow-through operation of the CuNW filter outperformed conventional batch electrochemistry due to convection-enhanced mass transport. This study provides a new strategy for environmental remediation by integrating state-of-the-art material science, advanced oxidation processes, and microfiltration technology.

An extra-chelator-free fenton process assisted by electrocatalytic-induced in-situ pollutant carboxylation for target refractory organic efficient treatment in chemical-industrial wastewater

For traditional Fenton processes, the quenching behavior of radical contenders (e.g., most aliphatic hydrocarbons) on hydroxyl radicals (·OH) usually hinders the removal of target refractory pollutants (aromatic/heterocyclic hydrocarbons) in chemical industrial wastewater, leading to excess energy consumption. Herein, we proposed an electrocatalytic-assisted chelation-Fenton (EACF) process, with no extra-chelator addition, to significantly enhance target refractory pollutant (pyrazole as a representative) removal under high ·OH contender (glyoxal) levels. Experiments and theoretical calculations proved that superoxide radical (·O₂^-) and anodic direct electron transfer (DET) effectively converted the strong ·OH-quenching substance (glyoxal) to a weak radical competitor (oxalate) during the electrocatalytic oxidation process, promoting Fe²⁺ chelation and therefore increasing radical utilization for pyrazole degradation (reached maximum of ∼43-fold value upon traditional Fenton), which appeared more obviously in neutral/alkaline Fenton conditions. For actual pharmaceutical tailwater treatment, the EACF achieved 2-folds higher oriented-oxidation capability and ∼78% lower operation cost per pyrazole removal than the traditional Fenton process, demonstrating promising potential for future practical applications.

Photocatalytic O2 activation by metal-free carbon nitride nanotube for rapid reactive species generation and organic contaminants degradation

Advanced oxidation processes (AOPs) using oxygen (O₂) as an oxidant represent a low-cost and sustainable wastewater treatment process. Herein, a metal-free nanotubular carbon nitride photocatalyst (CN NT) was prepared to activate O₂ to degrade organic contaminants. The nanotube structure allowed for sufficient O₂ adsorption, while the optical and photoelectrochemical properties enabled photogenerated charge to be efficiently transferred to the adsorbed O₂ to trigger the activation process. The developed CN NT/Vis-O₂ system based on O₂ aeration degraded various organic contaminants and mineralized 40.7% of chloroquine phosphate within 100 min. In addition, the toxicity and environmental risk of treated contaminants were reduced. Mechanistic studies suggested that the enhanced O₂ adsorption capacity and fast charge transfer behavior on CN NT surface led to reactive·O₂^-, ¹O₂ and h⁺ generation, each of which played a distinct role in contaminants degradation. Importantly, the proposed process could overcome the interference from water matrices and outdoor sunlight, and the energy and chemical reagent savings reduced the operating cost to about 1.63 US$·m^-3. Altogether, this work provides insights into the potential application of metal-free photocatalysts and green O₂ activation for wastewater treatment.

Perspective on pH adjustment in hydrometallurgical recycling of valuable metals from waste

pH adjustment was considered a simple step in the hydrometallurgy process, but its complicated operation was ignored in the past. In some industrial applications, the leachate pH was slowly adjusted by a diluted alkaline solution, with the defects of doubling the leachate volume and causing droplet hydrolysis/coagulation. Up to date, promising routes have been developed for rapid pH adjustment, especially in sealed high-temperature/pressure vessels. New routes emerged in some redox/decomposition reactions of nitrate/urea and organics. Such reactions did not start and/or were slow at room temperature but started spontaneously at high temperatures to generate/consume free H⁺. This induced pH adjustment in a rapid and homogeneous way.

Efficient removal of recalcitrant naphthenic acids with electro-cocatalytic activation of peroxymonosulfate by Fe(III)-nitrilotriacetic acid complex under neutral initial pH condition

This work investigated the activation of peroxymonosulfate by electrochemical (EC) system assisted with Fe(III)-nitrilotriacetic acid (NTA) complex for degradation of persistent naphthenic acids (NAs) under neutral initial pH conditions. As NAs are a complicated mixture, 1-adamantanecarboxylic acid (ACA) was selected as the model NA compound for degradation experiment. The addition of NTA is to chelate with Fe(III), gaining stability under neutral pH condition to facilitate the circulation of Fe(II)/Fe(III) by the electrochemical process to activate PMS. The EC/Fe(III)-NTA/PMS system was explored with applicable pH range of 3-9 and an optimized molar ratio 1: 2 for Fe: NTA. Results of quenching and chemical probe experiment together with results of electron paramagnetic resonance (EPR) analysis revealed the main reactive species of the system, including ^•OH, SO₄^•-, ¹O₂ and possibly Fe(IV). With the addition of NTA, the yields of ^•OH, SO₄^•-, ¹O₂ were enhanced. Results of mass spectrometry analysis and DFT calculations indicated the formation of 9 degradation byproducts of ACA via three primary degradation pathways such as hydroxyl substitution, carbonyl substitution, and decarboxylation. Furthermore, the EC/Fe(III)-NTA/PMS system could achieve excellent removal efficiency of ACA with different anions such as Cl^-, HCO₃^-, NO₃^- and H₂PO₄^- in the background. The practical applicability of the system was also verified with the high removal of commercial NAs mixture standard. Overall results have indicated the EC/Fe(III)-NTA/PMS system could be utilized for efficient reclamation of authentic oil and gas industrial wastewater under natural pH conditions.

Low-coordinated Co-N3 sites induce peroxymonosulfate activation for norfloxacin degradation via high-valent cobalt-oxo species and electron transfer

The identification of reactive species in peroxymonosulfate (PMS) activation triggered by carbon-based single atom catalysts is the key to reveal the pollutant degradation mechanism. Herein, carbon-based single atom catalyst with low-coordinated Co-N₃ sites (Co_SA-N₃-C) was synthesized to active PMS for norfloxacin (NOR) degradation. The Co_SA-N₃-C/PMS system exhibited consistent high performance for oxidizing NOR over a wide pH range (3.0-11.0). The system also achieved complete NOR degradation in different water matrixes, high cycle stability and excellent degradation performance for other pollutants. Theoretical calculations confirmed that the catalytic activity was derived from the favorable electron density of low-coordinated Co-N₃ configuration, which was more conductive to PMS activation than other configurations. Electron paramagnetic resonance spectra, in-situ Raman analysis, solvent exchange (H₂O to D₂O), salt bridge and quenching experiments concluded that high-valent cobalt(IV)-oxo species (56.75%) and electron transfer (41.22%) contributed dominantly to NOR degradation. Moreover, ¹O₂ was generated in the activation process while not involved in pollutant degradation. This research demonstrates the specific contributions of nonradicals in PMS activation over Co-N₃ sites for pollutant degradation. It also offers updated perceptions for rational design of carbon-based single atom catalysts with appropriate coordination structure.

Enhanced activation of peroxymonosulfate by a floating FeMo3Ox/C3N4 photocatalyst under visible-light assistance for oxytetracycline degradation: Performance, mechanisms and comparison with H2O2 activation

In this study, a floating FeMo₃O_x/C₃N₄-EP (FM-C-P) composite with highly stability and reusability was synthesized by an impregnation/calcination process and used to activate peroxymonosulfate (PMS) for oxytetracycline (OTC) degradation under visible light irradiation. The results demonstrated that 98.1% of OTC (50 mg/L) removal can be achieved by the activation of PMS (5 mM) using FM-C-P (1 g/L) in 30 min under visible light irradiation. The pseudo-first-order rate constant was calculated to be 0.181 min^-1. The degradation process with PMS was hardly affected by pH (3-11) and co-existing substance. ·SO₄^-, ·OH, ·O₂^- and ¹O₂ were produced in the Vis/PMS/FM-C-P system and ¹O₂ was determined to be the main reactive oxygen species (ROSs). The high efficiency of ROSs production mainly contributed to two mechanisms. Firstly, via the combination of ≡Fe (II)-·SO₅^- and free state ·SO₅^-, ¹O₂ could be generated on the Fe-N_x site. Secondly, photo-induced electrons in the FeMo₃O_x/g-C₃N₄ heterojunction could react with Fe (III) and Mo (VI) to form catalytically active species Fe (II) and Mo (IV). Moreover, the proposed degradation pathway and the toxicity of intermediated products was analyzed. Overall, this study was expected to deepen the understanding of the photo-assisted PMS activation and the generation of ¹O₂ with the presence of metal-oxide/C₃N₄ heterojunction.